Butane-Powered Microtorches · 2013-08-20 · MT-11 Microtorch, palm-sized, shipped without fuel...
Transcript of Butane-Powered Microtorches · 2013-08-20 · MT-11 Microtorch, palm-sized, shipped without fuel...
• Master butane-powered microtorch heat tools produce a reliable, adjustable broad or pinpoint blue torch flame with temperatures of 2500°F/1300°C for portable or bench-top applications.
• A variety of models enables you to select the right microtorch heat tool for the most effective results for your applica-tion, including some with standard flameless heat, soldering and hot knife attachments/tips.
• Specialized attach-ments make the microtorch ideal for a wide variety of heat-ing, shrinking and drying applications, an essential tool for industry professionals.
• These industrial quality heat tools offer the handiest, safest way to get fast, reliable flame and heat needed for thousands of uses in the factory, laboratory or workshop.
Butane-PoweredMicrotorches
Microtorch familyMaster Butane-Powered
Users should independently evaluate the suitability of the product for their application.WARNING: The Department of Transportation Hazardous Material Regulations forbidcarriage of butane or other flammable gas products on passenger aircraft. Do not packthis item or any other flammable gas item, in any checked or carry-on baggage.WARNING: This product, when used for soldering and similar applications, produceschemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
As with all electrical equipment and tools, for your safety, read the instruction manual before using.
All information including illustrations, is believed to be reliable. Users, however, should independentlyevaluate the suitability of this product for their application. The only obligations of MasterAppliance are those in the Standard Terms and Conditions of Sale for this product. In no case willMaster Appliance be liable for any incidental indirect, or consequential damages arising from thesale, resale, use or misuse of this product.
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745Web Site: www.masterappliance.com E-mail: [email protected]
FOR MASTER PRODUCTS CONTACT:
For use with all Master Microtorch productsUltratane® Butane
Master Appliance is the Source of Heat Tools for Industry Professionals. Ask about our Electric Heat Guns, Butane-Powered Ultratorches, Microtorches, Hot MeltGlue Gun, Low Voltage Soldering Iron and Enviromentally Sealed Electrical Connectors.
Whatever the application.... We’ve got the heat!
www.masterappliance.com
MODEL NO. DESCRIPTIONGT-70 General Industrial Torch
US
Self-contained, butane-powered, heavy-duty, general industrial torchGeneral Industrial Torch GT-70
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 30 Min. • Fuel Tank:Metal, Built-in, Refillable • Dimensions: 6.5" H x 5" W x 1.8" D • Net Weight: 10.6 oz. • Shipping Weight: 2 lb. • Shipped Empty
• Self-igniting piezo electric ignition is easy to start and eliminatesneed for lighter or matches
• Durable self-contained, metal fuel tank • Large capacity fuel tank for 30-minute continuous run time on afull charge
• Large sized adjustable blue flame accommodates heavy-duty in-dustrial applications with temperatures up to 2500°F/1300°C
• Safety lock prevents unintentional ignition, locks for storage• Removable base for table-top or hand-held use• Refill with Master Ultratane Butane for best performance• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Use to braze with special alloy welding rods, heat and bend thinmetals, loosen rusted bolts, pop dents out of metal, shrink andterminate heavy wall adhesive-lined tubing, solder and desolderand more
Microtorch MT-30Low profile, butane-powered, table-top microtorch with heavy base
• Built-in self-igniting system with safety lock that ensures theswitch is not turned on when not in use
• Wide, heavy, stable base is perfect for hands-free bench-top use• Durable self-contained, refillable metal fuel tank • Large capacity fuel tank for 60-minute continuous run time on afull charge
• Adjustable broad or pinpoint flame• Refill with Master Ultratane Butane for best performance• Use for laboratory applications, to heat materials, shrink tubing,terminate specialty connectors, work with silver wire, add patina to copper jewelry, as a pinpoint torch and more
MODEL NO. DESCRIPTIONMT-30 Microtorch, low profile table-top
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 60 min. @ max. setting• Fuel Tank: Metal, Built-in, Refillable • Dimensions: 5.1" L x 3" W x 3.5" D • Net Weight: 12 oz. • Shipping Weight: 2 lbs. • Shipped Empty
MADE IN
FORM# 58148 REV B
• Recommended fuel for all Master butane-powered products• Triple-refined formula reduces clogging of filters• Special vapor pressure promotes consistent ignition• Contains no CFC’s• Available in three aerosol canister sizes: (see chart below)• 11799 & 10448 meet Limited Quantity Class and can be ship viaground transportation without hazardous material charges
• 51773 ships via ground transportation with hazardous materialcharges
1179933/4 oz.
5177351/8 oz.
1044815/16 oz.
MODEL NO. DESCRIPTION51773 51/8 oz. (145 gram) canister with universal tip adapter11799 33/4 oz. (106 gram) canister with universal tip adapter10448 15/16 oz. (26 gram) canister with universal tip adapter
353990-Broch_Layout 1 01/25/2013 12:06 PM Page 1
Hand-held or table-topMicrotorch MT-51, MT-51B & MT-51H
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: Two Hours • FuelTank: Plastic, Built-in, Refillable • Dimensions: 6.1" H x 3" W x 1.3" D• Net Weight: 5 oz. • Shipping Weight: 1 lb. • Shipped Empty
MT-51BHot air tip provides flame-less heat combined with reflector for heat shrink applications
Hot Air Tip35387Heat Shrink Attachment35394
MT-51H
MT-51
Included butane canister providesthree fuel refills.Ships via groundtransportation with no Hazmat charges
• Built-in self-ignitingsystem with safetylock
• “Hands-free” slide lockfor continuous use and instant off operation
• Built-in refillable plastic fuel tank• Wide, stable base is perfect for hands-free use• Temperature up to 2500°F/1300°C• 2 hour continuous burn time, perfect for continuous heat applications• Adjustable broad or pinpoint flame
MODEL NO. DESCRIPTIONMT-51 Microtorch, table-topMT-51B Microtorch, table-top with 15/16 oz. butane (10448)MT-51H Microtorch, table-top includes hot air tip (35387) and
1” diameter heat shrink attachment (35394)
Butane10448
www.masterappliance.com • [email protected]
Triggertorch™ MT-70Self-igniting butane-powered heat tool
• Gas adjustment wheel provides adjustable, long blue torch flame withtemperatures up to 2,500°F/1300°C
• Self-igniting piezo electric ignition is easy to start and eliminates needfor lighter or matches
• “Hands-free” slide lock for continuous use and instant off operation• Durable self-contained, refillable plastic fuel tank • Large fuel capacity for 60-minute continuous run time• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Unique shutter lever to easily extinguish ignition flame when using optional soldering (35386) or hot air (35387) tip attachments
• Ergonomic handle design ensures a non-slip grip• Removable base for table-top or hand-held useMODEL NO. DESCRIPTIONMT-70 Triggertorch, mini, table-top
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 60 min. @ max. setting• Fuel Tank: Plastic, Built-in, Refillable • Dimensions: 5.5" L x 3.8" H x 1.3" W • Net Weight: 7.6 oz. • Shipping Weight: 1 lb. • Shipped Empty
MT-76, 3 tools in 1Open Flame Torch, Soldering Iron
and Flameless Hot Air
• Gas adjustment wheel provides adjustable, long blue torch flamewith temperatures up to 2,500°F/1300°C
• Self-igniting peizo electric ignition is easy to start and eliminates theneed for lighter or matches
• MT-76 includes soldering tip and hot air tip for soldering up to752°F/400°C and heating up to 932°F/500°C
• Kit includes triggertorch, removable stand, 5” wire cutter, 5” needle nose pliers, soldering tip, hot air tip, shrink attachment,polyfoam cutter, hot knife tip, roll 60/40 solder, and stand with spongepacked in a durable plastic storage/carrying case
• Incorporates “trigger” switch with “pulldown” lock to meet ConsumerProducts Safety Commission (CPSC) Child Safety Requirements
• “Hands-free” slide lock for continuous use and instant off operation• Unique shutter lever to easily extinguish ignition flame when usingsoldering or hot air tip attachments
• Ergonomic handle design ensures a non-slip grip• Removable base for table-top or hand-held use• Durable, self-contained, refillable plastic fuel tank with capacity for 2hour run time
• Refill with Master Ultratane Butane for best performance• Use to heat parts, ignite materials, melt plastic, shrink tubing, solder& desolder, terminate specialty connectors and more
Professional quality, hand-held or table-top, butane-powered, self-igniting triggertorch, soldering iron, flameless heat tool & kit
Triggertorch™ MT-76 & MT-76K
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: Two Hours • Fuel Tank: Plastic,Built-in, Refillable • Dimensions: 6.5”H x 3.8”W x 1.3”D • MT-76 Weight: 8 oz. • Shipping Weight Tool: 1 lb. MT-76K Weight: 2 lbs. • Shipping Weight Kit: 3 lbs. • Shipped Empty
US
MT-76K, 4 tools in 1Open Flame Torch, Soldering Iron,Flameless Hot Air and Hot Knife
Hot Air Tip35387
Soldering Tip35386
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Heat up to 932°F/500°C Soldering up to 752°F/400°C
Microtorch MT-5
• Compact size that fits easily into pocket or tool kit• Quick starting self-igniting piezo electric ignition eliminates theneed for lighters or matches
• Flame resists wind and moisture and is perfect for outdoor use • Adjustable flame height for low and high temperatures up to2500°F/1300°C blue flame
• Safety lock and attached safety cap prevent unintentional ignition• Hands-free mode• Refill with Master Ultratane Butane for best performance• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Use to heat and ignite materials, repair glass, shrink tubing,solder and desolder, terminate specialty connectors and more
MODEL NO. DESCRIPTIONMT-5 Microtorch, pocket-sized
Specifications• Approx. Flame Temp. 2500° F • Fuel Tank: Plastic, Built-in, Refillable • Approx. Run Time: 20 min. @ max. setting • Dimensions: 2.9" H x 1.3" W x.9" D • Net Weight: 1.7 oz. • Shipping Weight: 1 lb. • Shipped Empty
MOREGAS
LESSGAS
Pocket-sized, refillable, butane-powered microtorch
Compact palm-sized, self-igniting, butane-powered microtorch & kitMicrotorch MT-11 & MT-11K
• Built-in self-igniting system with safety lock• Temperatures up to 2500°F/1300°C• Compact, palm-sized, perfect for tool kits and field service kits• Adjustable wind-resistant flame• Replaceable, refillable “fuel cell” (included)• Fuel level inspection window• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Kit includes microtorch with empty fuel cell and 15/16 oz. can of butane packed in single shipper carton with proper D.O.T. markings
• Ships via ground transportation without hazmat charges• Use to heat materials, ignite materials, pinpoint torch, shrink tubing,solder and desolder, terminate specialty connectors and more
MODEL NO. DESCRIPTIONMT-11 Microtorch, palm-sized, shipped without fuelMT-11K Microtorch with 15/16 oz. can of butane (10448)RC-31 Replacement fuel cell 2 pack
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 20 min. @ max. setting• Fuel Tank: Fuel Cell, Refillable • Dimensions: 4.3" H x 2.5" W x 1" D • NetWeight: 2.1 oz. • Shipping Weight: 1 lb. • Shipping Weight Kit: 2 lbs. • TorchShipped Empty
www.masterappliance.com • [email protected]
US
MODEL NO. DESCRIPTIONMT-76 Triggertorch with table-top stand, soldering tip (35386)
& hot air tip (35387)MT-76K Triggertorch Kit with table-top stand, soldering tip (35386),
hot air tip (35387), hot knife tip (35400), shrink attachment (35394), polyfoam cutter (35396), 5” wire cutter, 5” needle nose pliers, 60/40 solder and sponge packed in a durable plastic case
MODEL NO. DESCRIPTION51773 51/8 oz. (145 gram) canister with universal tip adapter10448 15/16 oz. (26 gram) canister with universal tip adapterRC-31 Refillable butane fuel cell. Carded 2 per card
353990-Broch_Layout 1 01/25/2013 12:07 PM Page 2
Hand-held or table-topMicrotorch MT-51, MT-51B & MT-51H
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: Two Hours • FuelTank: Plastic, Built-in, Refillable • Dimensions: 6.1" H x 3" W x 1.3" D• Net Weight: 5 oz. • Shipping Weight: 1 lb. • Shipped Empty
MT-51BHot air tip provides flame-less heat combined with reflector for heat shrink applications
Hot Air Tip35387Heat Shrink Attachment35394
MT-51H
MT-51
Included butane canister providesthree fuel refills.Ships via groundtransportation with no Hazmat charges
• Built-in self-ignitingsystem with safetylock
• “Hands-free” slide lockfor continuous use and instant off operation
• Built-in refillable plastic fuel tank• Wide, stable base is perfect for hands-free use• Temperature up to 2500°F/1300°C• 2 hour continuous burn time, perfect for continuous heat applications• Adjustable broad or pinpoint flame
MODEL NO. DESCRIPTIONMT-51 Microtorch, table-topMT-51B Microtorch, table-top with 15/16 oz. butane (10448)MT-51H Microtorch, table-top includes hot air tip (35387) and
1” diameter heat shrink attachment (35394)
Butane10448
www.masterappliance.com • [email protected]
Triggertorch™ MT-70Self-igniting butane-powered heat tool
• Gas adjustment wheel provides adjustable, long blue torch flame withtemperatures up to 2,500°F/1300°C
• Self-igniting piezo electric ignition is easy to start and eliminates needfor lighter or matches
• “Hands-free” slide lock for continuous use and instant off operation• Durable self-contained, refillable plastic fuel tank • Large fuel capacity for 60-minute continuous run time• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Unique shutter lever to easily extinguish ignition flame when using optional soldering (35386) or hot air (35387) tip attachments
• Ergonomic handle design ensures a non-slip grip• Removable base for table-top or hand-held useMODEL NO. DESCRIPTIONMT-70 Triggertorch, mini, table-top
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 60 min. @ max. setting• Fuel Tank: Plastic, Built-in, Refillable • Dimensions: 5.5" L x 3.8" H x 1.3" W • Net Weight: 7.6 oz. • Shipping Weight: 1 lb. • Shipped Empty
MT-76, 3 tools in 1Open Flame Torch, Soldering Iron
and Flameless Hot Air
• Gas adjustment wheel provides adjustable, long blue torch flamewith temperatures up to 2,500°F/1300°C
• Self-igniting peizo electric ignition is easy to start and eliminates theneed for lighter or matches
• MT-76 includes soldering tip and hot air tip for soldering up to752°F/400°C and heating up to 932°F/500°C
• Kit includes triggertorch, removable stand, 5” wire cutter, 5” needle nose pliers, soldering tip, hot air tip, shrink attachment,polyfoam cutter, hot knife tip, roll 60/40 solder, and stand with spongepacked in a durable plastic storage/carrying case
• Incorporates “trigger” switch with “pulldown” lock to meet ConsumerProducts Safety Commission (CPSC) Child Safety Requirements
• “Hands-free” slide lock for continuous use and instant off operation• Unique shutter lever to easily extinguish ignition flame when usingsoldering or hot air tip attachments
• Ergonomic handle design ensures a non-slip grip• Removable base for table-top or hand-held use• Durable, self-contained, refillable plastic fuel tank with capacity for 2hour run time
• Refill with Master Ultratane Butane for best performance• Use to heat parts, ignite materials, melt plastic, shrink tubing, solder& desolder, terminate specialty connectors and more
Professional quality, hand-held or table-top, butane-powered, self-igniting triggertorch, soldering iron, flameless heat tool & kit
Triggertorch™ MT-76 & MT-76K
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: Two Hours • Fuel Tank: Plastic,Built-in, Refillable • Dimensions: 6.5”H x 3.8”W x 1.3”D • MT-76 Weight: 8 oz. • Shipping Weight Tool: 1 lb. MT-76K Weight: 2 lbs. • Shipping Weight Kit: 3 lbs. • Shipped Empty
US
MT-76K, 4 tools in 1Open Flame Torch, Soldering Iron,Flameless Hot Air and Hot Knife
Hot Air Tip35387
Soldering Tip35386
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Heat up to 932°F/500°C Soldering up to 752°F/400°C
Microtorch MT-5
• Compact size that fits easily into pocket or tool kit• Quick starting self-igniting piezo electric ignition eliminates theneed for lighters or matches
• Flame resists wind and moisture and is perfect for outdoor use • Adjustable flame height for low and high temperatures up to2500°F/1300°C blue flame
• Safety lock and attached safety cap prevent unintentional ignition• Hands-free mode• Refill with Master Ultratane Butane for best performance• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Use to heat and ignite materials, repair glass, shrink tubing,solder and desolder, terminate specialty connectors and more
MODEL NO. DESCRIPTIONMT-5 Microtorch, pocket-sized
Specifications• Approx. Flame Temp. 2500° F • Fuel Tank: Plastic, Built-in, Refillable • Approx. Run Time: 20 min. @ max. setting • Dimensions: 2.9" H x 1.3" W x.9" D • Net Weight: 1.7 oz. • Shipping Weight: 1 lb. • Shipped Empty
MOREGAS
LESSGAS
Pocket-sized, refillable, butane-powered microtorch
Compact palm-sized, self-igniting, butane-powered microtorch & kitMicrotorch MT-11 & MT-11K
• Built-in self-igniting system with safety lock• Temperatures up to 2500°F/1300°C• Compact, palm-sized, perfect for tool kits and field service kits• Adjustable wind-resistant flame• Replaceable, refillable “fuel cell” (included)• Fuel level inspection window• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Kit includes microtorch with empty fuel cell and 15/16 oz. can of butane packed in single shipper carton with proper D.O.T. markings
• Ships via ground transportation without hazmat charges• Use to heat materials, ignite materials, pinpoint torch, shrink tubing,solder and desolder, terminate specialty connectors and more
MODEL NO. DESCRIPTIONMT-11 Microtorch, palm-sized, shipped without fuelMT-11K Microtorch with 15/16 oz. can of butane (10448)RC-31 Replacement fuel cell 2 pack
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 20 min. @ max. setting• Fuel Tank: Fuel Cell, Refillable • Dimensions: 4.3" H x 2.5" W x 1" D • NetWeight: 2.1 oz. • Shipping Weight: 1 lb. • Shipping Weight Kit: 2 lbs. • TorchShipped Empty
www.masterappliance.com • [email protected]
US
MODEL NO. DESCRIPTIONMT-76 Triggertorch with table-top stand, soldering tip (35386)
& hot air tip (35387)MT-76K Triggertorch Kit with table-top stand, soldering tip (35386),
hot air tip (35387), hot knife tip (35400), shrink attachment (35394), polyfoam cutter (35396), 5” wire cutter, 5” needle nose pliers, 60/40 solder and sponge packed in a durable plastic case
MODEL NO. DESCRIPTION51773 51/8 oz. (145 gram) canister with universal tip adapter10448 15/16 oz. (26 gram) canister with universal tip adapterRC-31 Refillable butane fuel cell. Carded 2 per card
353990-Broch_Layout 1 01/25/2013 12:07 PM Page 2
Hand-held or table-topMicrotorch MT-51, MT-51B & MT-51H
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: Two Hours • FuelTank: Plastic, Built-in, Refillable • Dimensions: 6.1" H x 3" W x 1.3" D• Net Weight: 5 oz. • Shipping Weight: 1 lb. • Shipped Empty
MT-51BHot air tip provides flame-less heat combined with reflector for heat shrink applications
Hot Air Tip35387Heat Shrink Attachment35394
MT-51H
MT-51
Included butane canister providesthree fuel refills.Ships via groundtransportation with no Hazmat charges
• Built-in self-ignitingsystem with safetylock
• “Hands-free” slide lockfor continuous use and instant off operation
• Built-in refillable plastic fuel tank• Wide, stable base is perfect for hands-free use• Temperature up to 2500°F/1300°C• 2 hour continuous burn time, perfect for continuous heat applications• Adjustable broad or pinpoint flame
MODEL NO. DESCRIPTIONMT-51 Microtorch, table-topMT-51B Microtorch, table-top with 15/16 oz. butane (10448)MT-51H Microtorch, table-top includes hot air tip (35387) and
1” diameter heat shrink attachment (35394)
Butane10448
www.masterappliance.com • [email protected]
Triggertorch™ MT-70Self-igniting butane-powered heat tool
• Gas adjustment wheel provides adjustable, long blue torch flame withtemperatures up to 2,500°F/1300°C
• Self-igniting piezo electric ignition is easy to start and eliminates needfor lighter or matches
• “Hands-free” slide lock for continuous use and instant off operation• Durable self-contained, refillable plastic fuel tank • Large fuel capacity for 60-minute continuous run time• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Unique shutter lever to easily extinguish ignition flame when using optional soldering (35386) or hot air (35387) tip attachments
• Ergonomic handle design ensures a non-slip grip• Removable base for table-top or hand-held useMODEL NO. DESCRIPTIONMT-70 Triggertorch, mini, table-top
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 60 min. @ max. setting• Fuel Tank: Plastic, Built-in, Refillable • Dimensions: 5.5" L x 3.8" H x 1.3" W • Net Weight: 7.6 oz. • Shipping Weight: 1 lb. • Shipped Empty
MT-76, 3 tools in 1Open Flame Torch, Soldering Iron
and Flameless Hot Air
• Gas adjustment wheel provides adjustable, long blue torch flamewith temperatures up to 2,500°F/1300°C
• Self-igniting peizo electric ignition is easy to start and eliminates theneed for lighter or matches
• MT-76 includes soldering tip and hot air tip for soldering up to752°F/400°C and heating up to 932°F/500°C
• Kit includes triggertorch, removable stand, 5” wire cutter, 5” needle nose pliers, soldering tip, hot air tip, shrink attachment,polyfoam cutter, hot knife tip, roll 60/40 solder, and stand with spongepacked in a durable plastic storage/carrying case
• Incorporates “trigger” switch with “pulldown” lock to meet ConsumerProducts Safety Commission (CPSC) Child Safety Requirements
• “Hands-free” slide lock for continuous use and instant off operation• Unique shutter lever to easily extinguish ignition flame when usingsoldering or hot air tip attachments
• Ergonomic handle design ensures a non-slip grip• Removable base for table-top or hand-held use• Durable, self-contained, refillable plastic fuel tank with capacity for 2hour run time
• Refill with Master Ultratane Butane for best performance• Use to heat parts, ignite materials, melt plastic, shrink tubing, solder& desolder, terminate specialty connectors and more
Professional quality, hand-held or table-top, butane-powered, self-igniting triggertorch, soldering iron, flameless heat tool & kit
Triggertorch™ MT-76 & MT-76K
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: Two Hours • Fuel Tank: Plastic,Built-in, Refillable • Dimensions: 6.5”H x 3.8”W x 1.3”D • MT-76 Weight: 8 oz. • Shipping Weight Tool: 1 lb. MT-76K Weight: 2 lbs. • Shipping Weight Kit: 3 lbs. • Shipped Empty
US
MT-76K, 4 tools in 1Open Flame Torch, Soldering Iron,Flameless Hot Air and Hot Knife
Hot Air Tip35387
Soldering Tip35386
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Heat up to 932°F/500°C Soldering up to 752°F/400°C
Microtorch MT-5
• Compact size that fits easily into pocket or tool kit• Quick starting self-igniting piezo electric ignition eliminates theneed for lighters or matches
• Flame resists wind and moisture and is perfect for outdoor use • Adjustable flame height for low and high temperatures up to2500°F/1300°C blue flame
• Safety lock and attached safety cap prevent unintentional ignition• Hands-free mode• Refill with Master Ultratane Butane for best performance• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Use to heat and ignite materials, repair glass, shrink tubing,solder and desolder, terminate specialty connectors and more
MODEL NO. DESCRIPTIONMT-5 Microtorch, pocket-sized
Specifications• Approx. Flame Temp. 2500° F • Fuel Tank: Plastic, Built-in, Refillable • Approx. Run Time: 20 min. @ max. setting • Dimensions: 2.9" H x 1.3" W x.9" D • Net Weight: 1.7 oz. • Shipping Weight: 1 lb. • Shipped Empty
MOREGAS
LESSGAS
Pocket-sized, refillable, butane-powered microtorch
Compact palm-sized, self-igniting, butane-powered microtorch & kitMicrotorch MT-11 & MT-11K
• Built-in self-igniting system with safety lock• Temperatures up to 2500°F/1300°C• Compact, palm-sized, perfect for tool kits and field service kits• Adjustable wind-resistant flame• Replaceable, refillable “fuel cell” (included)• Fuel level inspection window• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Kit includes microtorch with empty fuel cell and 15/16 oz. can of butane packed in single shipper carton with proper D.O.T. markings
• Ships via ground transportation without hazmat charges• Use to heat materials, ignite materials, pinpoint torch, shrink tubing,solder and desolder, terminate specialty connectors and more
MODEL NO. DESCRIPTIONMT-11 Microtorch, palm-sized, shipped without fuelMT-11K Microtorch with 15/16 oz. can of butane (10448)RC-31 Replacement fuel cell 2 pack
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 20 min. @ max. setting• Fuel Tank: Fuel Cell, Refillable • Dimensions: 4.3" H x 2.5" W x 1" D • NetWeight: 2.1 oz. • Shipping Weight: 1 lb. • Shipping Weight Kit: 2 lbs. • TorchShipped Empty
www.masterappliance.com • [email protected]
US
MODEL NO. DESCRIPTIONMT-76 Triggertorch with table-top stand, soldering tip (35386)
& hot air tip (35387)MT-76K Triggertorch Kit with table-top stand, soldering tip (35386),
hot air tip (35387), hot knife tip (35400), shrink attachment (35394), polyfoam cutter (35396), 5” wire cutter, 5” needle nose pliers, 60/40 solder and sponge packed in a durable plastic case
MODEL NO. DESCRIPTION51773 51/8 oz. (145 gram) canister with universal tip adapter10448 15/16 oz. (26 gram) canister with universal tip adapterRC-31 Refillable butane fuel cell. Carded 2 per card
353990-Broch_Layout 1 01/25/2013 12:07 PM Page 2
• Master butane-powered microtorch heat tools produce a reliable, adjustable broad or pinpoint blue torch flame with temperatures of 2500°F/1300°C for portable or bench-top applications.
• A variety of models enables you to select the right microtorch heat tool for the most effective results for your applica-tion, including some with standard flameless heat, soldering and hot knife attachments/tips.
• Specialized attach-ments make the microtorch ideal for a wide variety of heat-ing, shrinking and drying applications, an essential tool for industry professionals.
• These industrial quality heat tools offer the handiest, safest way to get fast, reliable flame and heat needed for thousands of uses in the factory, laboratory or workshop.
Butane-PoweredMicrotorches
Microtorch familyMaster Butane-Powered
Users should independently evaluate the suitability of the product for their application.WARNING: The Department of Transportation Hazardous Material Regulations forbidcarriage of butane or other flammable gas products on passenger aircraft. Do not packthis item or any other flammable gas item, in any checked or carry-on baggage.WARNING: This product, when used for soldering and similar applications, produceschemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
As with all electrical equipment and tools, for your safety, read the instruction manual before using.
All information including illustrations, is believed to be reliable. Users, however, should independentlyevaluate the suitability of this product for their application. The only obligations of MasterAppliance are those in the Standard Terms and Conditions of Sale for this product. In no case willMaster Appliance be liable for any incidental indirect, or consequential damages arising from thesale, resale, use or misuse of this product.
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745Web Site: www.masterappliance.com E-mail: [email protected]
FOR MASTER PRODUCTS CONTACT:
For use with all Master Microtorch productsUltratane® Butane
Master Appliance is the Source of Heat Tools for Industry Professionals. Ask about our Electric Heat Guns, Butane-Powered Ultratorches, Microtorches, Hot MeltGlue Gun, Low Voltage Soldering Iron and Enviromentally Sealed Electrical Connectors.
Whatever the application.... We’ve got the heat!
www.masterappliance.com
MODEL NO. DESCRIPTIONGT-70 General Industrial Torch
US
Self-contained, butane-powered, heavy-duty, general industrial torchGeneral Industrial Torch GT-70
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 30 Min. • Fuel Tank:Metal, Built-in, Refillable • Dimensions: 6.5" H x 5" W x 1.8" D • Net Weight: 10.6 oz. • Shipping Weight: 2 lb. • Shipped Empty
• Self-igniting piezo electric ignition is easy to start and eliminatesneed for lighter or matches
• Durable self-contained, metal fuel tank • Large capacity fuel tank for 30-minute continuous run time on afull charge
• Large sized adjustable blue flame accommodates heavy-duty in-dustrial applications with temperatures up to 2500°F/1300°C
• Safety lock prevents unintentional ignition, locks for storage• Removable base for table-top or hand-held use• Refill with Master Ultratane Butane for best performance• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Use to braze with special alloy welding rods, heat and bend thinmetals, loosen rusted bolts, pop dents out of metal, shrink andterminate heavy wall adhesive-lined tubing, solder and desolderand more
Microtorch MT-30Low profile, butane-powered, table-top microtorch with heavy base
• Built-in self-igniting system with safety lock that ensures theswitch is not turned on when not in use
• Wide, heavy, stable base is perfect for hands-free bench-top use• Durable self-contained, refillable metal fuel tank • Large capacity fuel tank for 60-minute continuous run time on afull charge
• Adjustable broad or pinpoint flame• Refill with Master Ultratane Butane for best performance• Use for laboratory applications, to heat materials, shrink tubing,terminate specialty connectors, work with silver wire, add patina to copper jewelry, as a pinpoint torch and more
MODEL NO. DESCRIPTIONMT-30 Microtorch, low profile table-top
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 60 min. @ max. setting• Fuel Tank: Metal, Built-in, Refillable • Dimensions: 5.1" L x 3" W x 3.5" D • Net Weight: 12 oz. • Shipping Weight: 2 lbs. • Shipped Empty
MADE IN
FORM# 58148 REV B
• Recommended fuel for all Master butane-powered products• Triple-refined formula reduces clogging of filters• Special vapor pressure promotes consistent ignition• Contains no CFC’s• Available in three aerosol canister sizes: (see chart below)• 11799 & 10448 meet Limited Quantity Class and can be ship viaground transportation without hazardous material charges
• 51773 ships via ground transportation with hazardous materialcharges
1179933/4 oz.
5177351/8 oz.
1044815/16 oz.
MODEL NO. DESCRIPTION51773 51/8 oz. (145 gram) canister with universal tip adapter11799 33/4 oz. (106 gram) canister with universal tip adapter10448 15/16 oz. (26 gram) canister with universal tip adapter
353990-Broch_Layout 1 01/25/2013 12:06 PM Page 1
• Master butane-powered microtorch heat tools produce a reliable, adjustable broad or pinpoint blue torch flame with temperatures of 2500°F/1300°C for portable or bench-top applications.
• A variety of models enables you to select the right microtorch heat tool for the most effective results for your applica-tion, including some with standard flameless heat, soldering and hot knife attachments/tips.
• Specialized attach-ments make the microtorch ideal for a wide variety of heat-ing, shrinking and drying applications, an essential tool for industry professionals.
• These industrial quality heat tools offer the handiest, safest way to get fast, reliable flame and heat needed for thousands of uses in the factory, laboratory or workshop.
Butane-PoweredMicrotorches
Microtorch familyMaster Butane-Powered
Users should independently evaluate the suitability of the product for their application.WARNING: The Department of Transportation Hazardous Material Regulations forbidcarriage of butane or other flammable gas products on passenger aircraft. Do not packthis item or any other flammable gas item, in any checked or carry-on baggage.WARNING: This product, when used for soldering and similar applications, produceschemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
As with all electrical equipment and tools, for your safety, read the instruction manual before using.
All information including illustrations, is believed to be reliable. Users, however, should independentlyevaluate the suitability of this product for their application. The only obligations of MasterAppliance are those in the Standard Terms and Conditions of Sale for this product. In no case willMaster Appliance be liable for any incidental indirect, or consequential damages arising from thesale, resale, use or misuse of this product.
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745Web Site: www.masterappliance.com E-mail: [email protected]
FOR MASTER PRODUCTS CONTACT:
For use with all Master Microtorch productsUltratane® Butane
Master Appliance is the Source of Heat Tools for Industry Professionals. Ask about our Electric Heat Guns, Butane-Powered Ultratorches, Microtorches, Hot MeltGlue Gun, Low Voltage Soldering Iron and Enviromentally Sealed Electrical Connectors.
Whatever the application.... We’ve got the heat!
www.masterappliance.com
MODEL NO. DESCRIPTIONGT-70 General Industrial Torch
US
Self-contained, butane-powered, heavy-duty, general industrial torchGeneral Industrial Torch GT-70
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 30 Min. • Fuel Tank:Metal, Built-in, Refillable • Dimensions: 6.5" H x 5" W x 1.8" D • Net Weight: 10.6 oz. • Shipping Weight: 2 lb. • Shipped Empty
• Self-igniting piezo electric ignition is easy to start and eliminatesneed for lighter or matches
• Durable self-contained, metal fuel tank • Large capacity fuel tank for 30-minute continuous run time on afull charge
• Large sized adjustable blue flame accommodates heavy-duty in-dustrial applications with temperatures up to 2500°F/1300°C
• Safety lock prevents unintentional ignition, locks for storage• Removable base for table-top or hand-held use• Refill with Master Ultratane Butane for best performance• Meets Consumer Products Safety Commission (CPSC) Child Safety Requirements
• Use to braze with special alloy welding rods, heat and bend thinmetals, loosen rusted bolts, pop dents out of metal, shrink andterminate heavy wall adhesive-lined tubing, solder and desolderand more
Microtorch MT-30Low profile, butane-powered, table-top microtorch with heavy base
• Built-in self-igniting system with safety lock that ensures theswitch is not turned on when not in use
• Wide, heavy, stable base is perfect for hands-free bench-top use• Durable self-contained, refillable metal fuel tank • Large capacity fuel tank for 60-minute continuous run time on afull charge
• Adjustable broad or pinpoint flame• Refill with Master Ultratane Butane for best performance• Use for laboratory applications, to heat materials, shrink tubing,terminate specialty connectors, work with silver wire, add patina to copper jewelry, as a pinpoint torch and more
MODEL NO. DESCRIPTIONMT-30 Microtorch, low profile table-top
Specifications• Approx. Flame Temp.: 2500° F • Approx. Run Time: 60 min. @ max. setting• Fuel Tank: Metal, Built-in, Refillable • Dimensions: 5.1" L x 3" W x 3.5" D • Net Weight: 12 oz. • Shipping Weight: 2 lbs. • Shipped Empty
MADE IN
FORM# 58148 REV B
• Recommended fuel for all Master butane-powered products• Triple-refined formula reduces clogging of filters• Special vapor pressure promotes consistent ignition• Contains no CFC’s• Available in three aerosol canister sizes: (see chart below)• 11799 & 10448 meet Limited Quantity Class and can be ship viaground transportation without hazardous material charges
• 51773 ships via ground transportation with hazardous materialcharges
1179933/4 oz.
5177351/8 oz.
1044815/16 oz.
MODEL NO. DESCRIPTION51773 51/8 oz. (145 gram) canister with universal tip adapter11799 33/4 oz. (106 gram) canister with universal tip adapter10448 15/16 oz. (26 gram) canister with universal tip adapter
353990-Broch_Layout 1 01/25/2013 12:06 PM Page 1