©Disney/P

ixar

Page

1 of

3

BUNTIN

G

©Disney/P

ixar

Page

2 o

f 3

BUNTIN

G

Step 1: Print out garland flags - You can print as many as you like for a short or long garland. Fold the page on the center dashed line and then carefully cut out the flag shape. Make sure the two halves are positioned exactly on top of each other. Repeat this step for each flag.

BUNTING

Step 2: Cut a piece of string or ribbon to the length that you want your garland to be. Start at one end of the piece of string or ribbon and measure in about 15 inches. This is where your first FLAG will be placed.

Step 3: Unfold your first flag and spread glue on the bottom half of the white side of the flag. Carefully place the string or ribbon (at its measured spot for the first flag) into the crease of the folded fLAG. Fold the flag around the string or ribbon and press down firmly.

Step 4: Repeat step 3 with each flag, spacing them out evenly along the string or ribbon. Hang your garland anywhere to add some onward festivity!

©Disney/Pixar

Glue

FOLD

String or ribbon

Page 3 of 3