Bullet350 Twinspark Owner Manual

8/12/2019 Bullet350 Twinspark Owner Manual

http://slidepdf.com/reader/full/bullet350-twinspark-owner-manual 1/98



1

RELOADEDGet ready for the adventure of a lifetime. Reengineered. Redesigned. Revitalized.The all-new Bullet Electra 350 UCE features a modern Unit Construction engine with 5 gears onthe left. Easier to ride, more torque and no maintenance trouble. It’s the Bullet Reloaded.

This manual is designed to give you complete control over your motorcycle. It contains importantinformation on efficient operation and maintenance. We’ve also included tips on riding safely, aswell as suggestions to enhance your motorcycling experience.

Your safety is of prime concern to us and we urge you to be a responsible rider. Please selectyour riding gear carefully in accordance with your terrain, style and weather conditions. And ensurethe same for your pillion rider as well. Respect the law of the land and ride safe.

Finally, we welcome you to the Royal Enfield community. You can locate your nearest club or signup for the next big ride at www.royalenfield.com

The legend rides on.



2

All information in this manual is based on the latest product information available at the time of publ icati on. Due to c ontin ues impr ove ments or othe r c hang es, ther e m ay be disc re panc ies betw eeninformation in this manual and your vehicle. Royal Enfield reserves the right to make productionchanges at any time without prior notice and without incurring any obligation to make same orsimilar changes to vehicles previously built or sold.

All images shown are for reference to explain and need not to be exactly the same on the model youown. Technical specification are subject to change without prior notice.

“© Copyright 2014 Royal Enfield (A unit of Eicher Motors Ltd.). All Rights Reserved. No part of this manual shall be copied, distributed or otherwise dealt without the express permission in writingof Royal Enfield.

N O T I C E

Part No. 592579/B / Qty. 1000 / Apr. ‘14



4

P E R S O N A L & V E H I C L E

I N F O R M A T I O N

Vehicle Installation Form (VIF) No.

Name

Door No./Street

Locality

City State Pin

Contact Nos. Res: Off: Mobile : Email :

Engine No. Battery No.

Frame No. Battery make

Reg. No. Licence No.

Date of Sale Valid till dt.

Model Key No. :

Tyre make Colour

Sold by Dealer Code



5

F R E E S E R V I C E

R E C O R D

It is our endeavour to provide excellent service to your Bullet Electra 350 UCE at all times. Towardsthis we provide four free services at specific intervals.Please avail these services at the specified time, in any of the Royal Enfield Authorised Dealer /Service Point nearest to you and as a token of satisfactory services, kindly return the free servicecoupon duly filled in and signed, to the service outlet.Availing the free services in the s pecified time is a prerequisite for warranty consideration.The cost of fuel, oil, oil filter element, grease etc. used for all free services are chargeable to thecustomer.

Note Please ensure that the free service details are recorded in this sheet immediately after theservice is carried out.

Date of ServiceKms CoveredServicingDealer’s NameAddress

1 st Service 4 th Service2 nd Service 3 rd Service

Dealer / ASPRubber Stamp






6

S P E C I F I C A T I O N S

ENGINE AND ENGINE SYSTEMS

Engine Type .................... Single Cylinder.......................................... 4 Stroke, OHV,.......................................... Dual Spark Ignition.......................................... air cooled

Bore .................................. 70mm

Stroke .............................. 90mm

Swept volume ... .. .. .. .. ... .. .. 346cc

Compress ion ra tio . ...... ... 8 .5 :1

M ax . P ow er BH P @ RP M 1 9.8 @5 25 0

Max. Torque in NM@ RPM 28@4000

Idle RPM .......................... 1050+200

Starting ........................... Kick Start/E-Start

Air filter element ... .. .. ... . Paper element

Lubrication ..................... Wet sump, Forced

.......................................... lubricationEngine o il capacity. ..... .. 2 .75 Li tres

Carburetor . .. .. .. ... .. .. .. .. .. .. UCAL, BS29

Engine oil grade .... .. .. .. .. Royal Enfield.......................................... 15 W 50 API SL.......................................... Engine Oil (JASOMA)

Cooling ............................ Natural air flow

TRANSMISSION

Clutch .............................. Wet multiplatePrimary drive .... .. .. ... .. .. .. Duplex chain drive

Primary ratio... ... .. .. .. .. .. .. 2.15 : 1

Gear box .......................... Constant Mesh.......................................... 5 Speed

Gear Ratio ... .. .. .. .. ... .. .. .. .. . 1 st 3.06:1

.......................................... 2 nd 2.01:1

.......................................... 3 rd 1.52:1

.......................................... 4 th 1.21:1

.......................................... 5 th 1:1



7

Final drive....................... 15 Teeth (Sprocket)

Final Ratio ...................... 2.533:1

CHASSIS

Frame ............................... Tubular

Suspension :Front .......... Telescopic, hydraulic.......................................... damping,.......................................... Stroke 130 mm

Rear. ... .. ...... Swing arm wi th.......................................... gas sho ck abso rber s.......................................... stroke 80mm

Fr. Fork oil capacity ... .. 195 ml per leg

Front fork oil ................. 1F (Endurance fork oil)

Front Brake : Disc Brake. Hyd rauli c 280m m.......................................... ventilate d disc.

Rear ............ Foot operated 153 mm.......................................... single lead, internal.......................................... expanding

Brake oil Capacity .... .. .. . 60 ml

Brake oil grade .............. DOT 3 or DOT 4

Tyre size : Front . ... .. 3.25×19 4/6 PR

Rear .. .. .. .. 3.25×19 4/6 PR

TYRE PRESSURE

Solo Front ........ 20 psi/1.41 kg/cm 2

Rear .. ....... 30 psi /2 .11 kg/cm 2

With Pill ion Front . ....... 22 psi/1.55 kg/cm 2

Rear .. ....... 32 psi /2 .20 kg/cm 2

Steering lock................... In built

Fuel tank capacity.... .. .. . 13.5 Litres ***

Reserve ............................ 2 Litres approx.

ELECTRICALS

Generation....................... Alternator

System : E-Start. ... .. .. .. . 12V-DC (III Phase) Kick Start . .. .. 12V-AC/DC (I Phase)




8

Values / Dimensions given above are for your guidance only.

In view of continuous improvements being done on our products, the specifications arelikely to change without prior notice.

Ignition............................ Digital Dual Spark.......................................... Ignition, TCI System

Battery : E-Start .......... 12V-14 AH MF (III Phase) K ic k S ta rt .... 1 2V-5 AH (I P ha se )

Head lamp MFR ... .. .. ... .. . 12V, 35/35W

Tail lamp ......................... 12V, 5W

Brake lamp...................... 12V, 21W

Parking lamp.................. 12V, 2W (2 Nos.)Speedometer lamp . .. .. ..... 12V, 3.4W

Hi beam indica tor . .. .. ..... 12V, 2W

Tur n Sig na l Te ll Ta le .... 1 2V, 2 W

Turn signal . .. .. .. ... .. ... .. .. .. 12V, 10W

Horn ................................. 12V, 2.5 Amp(Max.)

Starter Motor (for E-Start) 12V, 0.7KW


WARNING

Using bulbs / other electrical gadgets other thanspecified rating may lead to over loading / erratic behaviour/ premature failure of electrical system.Modifications on the bike which are not approved by RoyalEnfield may not only disqualify for warranty, but also affects

per formanc e of the bike .

WEIGHTS

Kerb weight (90% fuel & Oil) E -S ta rt . ......... 1 87 K gs Kic k Start . ... 183 KgsMax pay load .... .. .. .. .. .. .. .. 163 Kgs.

DIMENSIONS

Length ............................. 2140 mmWidth................................ 810 mmHeight.............................. 1120 mmWheel base ... .. ... .. .. .. .. .. .. .. 1370 mmGround c learance . .......... 140 mmSaddle height. . .. .. .. .. .. .. .. .. 800mm

***Fuel tank is not a measuring instrument. The capacity of tank may vary slightly from specified value.



9

The information given under the titles : Warning, Caution and Note are for your safety and forthe care and safety to your motorcycle and others. Please read these carefully and if disregardedmay result in injury to yourself or others and damages to the motorcycle.

WARNING

Indicates a potentially hazardous situation. Disregarding this message may result in injury torider or other persons.

CAUTION :

This message if disregarded may result in damage to the vehicle.

NOTE :

Indicates important and useful messages for clearer understanding.

All Images shown are for reference to explain and need not to be exactly the same on the modelyou own. Technical specification are subject to change without prior notice.

S A F E T Y

D E F I N I T I O N S

NOTE: BS IIIThis vehicle meets Emission Norms -Bharat (Trem) Stage - III



10

RIDING DRESS

A proper riding apparel

NOTE :

A l i g h t c o l o u r e d s h i r t e n a b l e s g r e a t e rvisibility to other road users spec ially duringnights.

CAUTION :

Loose clothing may get caught on moving par ts of your moto r-cy cle.

A pair of riding boots or shoes.

Soft leather gloves.

Goggles or spectacles to safe guard eyes.

An ISI certified helmet. Affix light reflectingstrips of stickers at the front and rear.

SITTING POSTURE

Correct sitting posture is a pre-requisite forstable and safe riding :

Sit Straight with your shoulders co mpletelyrelaxed.

Keep your elbows close to your body.

Keep your toes in straight ahead direction.

Slightly press the petrol tank with the knees.

Hold the handle grip close to its inner end.

Look extensively, including rear view mirror,

without turning the head.BRAKING

Use both, front and rear brakes together formaximum braking efficiency.

WARNING

Applying any one of the brakes suddenly maycause the vehicle to skid.

While riding on wet or bad road conditions

use brakes cautiously.

S A F E A N D

H A P P Y R I D I N G



11

FRAME NUMBER

Punched on steering head tube RH side.

V E H I C L E I D E N T I F I -

C A T I O N N U M B E R S

ENGINE NUMBER

Punched on top of the engine LH side.



12

L O C A T I O N O F

K E Y P A R T S

11. Kick Start Lever12. Shock Absorber (Gas filled)

1. Rear Trafficator RH2. Tool box3. Air fil ter box

4 . Ca rb ur eto r5 . Pilo t Lamp RH

6. He ad Light7. Front Number Plate8. Front Trafficator RH

9. Steer ing lock10. Brake Pedal

1

6

8

7

9101112

5

2 43

RIGHT SIDE VIEW



13

L O C A T I O N O F

K E Y P A R T S

1

3 4 5 6

8

9

11 1013

2

12

7

LEFT SIDE VIEW

1. Front Trafficator LH2. Pilo t Lamp LH3. Fuel Tank

4. Fuel Tap5. Battery Box Cover

11. Center Stand12. Gear Shift Lever13. Ho rn

6. Seat7. Ta il La mp8. Rear Trafficator LH

9. Number Plate Rear10. Side Stand



14

L O C A T I O N O F

K E Y P A R T S

TOP VIEW

1. H or n Bu tto n

2. Turn Signal Switch

3. Cluth Lever LH

4. Head Lamp Dip Switch

5. Ignition Switch

6. Speedo Meter

7. Amme te r

8. Engine Kill Switch

9. Brake Lever RH

10. Pilot & Head Lamp Switch

11. E-Start Switch

12. Petrol Tank Cap

2

54

3

1

6 7 8 9

10

12

11



15

IGNITION SWITCH

OFF

ON

FUEL TANK CAP

Turn KeyClockwise toopen

Turn Key AntiClock wise toclose.

O P E R A T I O N O F

C O N T R O L S



16


C O N T R O L S

SIDE BOX

Turn anti clockwiseto open

BATTERY BOX

Turn anti clockwiseto open

NOTE :

Key is common for ignition, petrol tank cap,steering lock, and tool boxes.Key for fuel tank and tool boxes can beremoved f rom the lock only in locked

pos itio n.

STEERING LOCK

Turn Clockwise tolock

Turn Anticlockwiseto Unlock

NOTE :

Turn handle bar to ext reme lef t , beforeattempting to lock steering.



17


C O N T R O L S

HORN

Press

HEAD LIGHT

SWITCH

OFF

Pilot ON

Head lamp ON

ELECTRIC START SWITCH

E-START BUTTON

Press fully to start

NOTE :

Press E-StartButton fully tillengine developscranking speed.

Not to make half hearted attempt.



18

DIMMER SWITCH

High beam

Low beam

Day flash


C O N T R O L S

ENGINE STOP SWITCH

ON

OFF



19


C O N T R O L S

TURN SIGNAL

SWITCH

OFF (Push to off)

Right turn signal ON

Left turn signal ON

CAUTION :

Choke should be used only to start a coldengine. Riding the motorcycle with the choke

‘ON’ will increase pollution and result in highfuel consumption and loss of power.

ON

OFF

CHOKE

Pull Out

Press



20


C O N T R O L S

FUEL TAP

OFF

Main ON

Reserve ON

Front Brake

Rear Brake

CHECK FOR :

1. Petrol level in the tank and leakage if any.

2 . Opera te and free p lay of f ront and rear brak es.

Brake Pedal

3. Free play and smoothness of all operating

cables.4. Free movement of steering



21

P R E O P E R A T I O N A L

C H E C K S

NOTE :

Start engine, run for 2 minutes before checkingoil level

MINMAX

5. Battery electrolyte level.

6. Any cuts, cracks in the tyre and correct tyre pressure.

7. Operation of all electrical parts.

8. Brake fluid is above the ‘min’ level in the mastercylinder.

MIN

9. Lub oil level should be in between “MAX “ &“MIN” Level. Top up if necessary. Do not overfillabove maximum level.



22

R U N N I N G I N P E R I O D

The Bullet Electra 350 UCE, as you would beexperiencing, is capable of consistent high speeds.However as with any new motorcycle, a “running-in” is essential during the first 2000 kms to achieveoptimum performance subsquently.

The following tips will help in proper bedding of anew motorcycle.

1. During the first 2000 Kms of run, do not exceedthe following speed limits.

VehicleSpeed

GearFirst 500 kms 501 - 2000 kms

1 15 KMPH 20 KMPH

2 25 KMPH 30 KMPH

3 30 KMPH 40 KMPH

4 45 KMPH 55 KMPH

5 60 KMPH 70 KMPH

2. Do not exceed maximum pay load as specified.

3. Warm up the engine for a few minutes to allowoil for all engine parts before riding the bike.

4. Do not ride in constant throttle for longdistances. Vary the speed by 10%.

5. Avoid sudden revving and racing starts.



24

GEAR SHIFTING, RIDING & STOPPINGWarm up engine for 2 minutes - till idling isconsistent.

Operate clutch lever.

Press gear p edal with toe to engage 1 st gear.

Gently open throttleand release clutchsimultaneously. If c lu tch i s re leasedsuddenly, the enginemay stall and cause

the motorcycle tomove with a jerk.

S T A R T I N G

USING ELECTRIC START

Press the clutch lever and press starter buttonand release once the engine starts.

NOTE :

If the engine does not start, wait for 30 seconds before press ing the starter button again.

CAUTION :

Please ensure that the gears are in neutral before starting the motorcy cle.

Press Starter button and release starter switchonce the engine starts.

A Clutch switch is provided in the system forthe safety of the rider. When the vehicle is ingear, the vehicle cannot be started - To startin gear operate the clutch lever, pres s Starter

but ton and re lea se star ter swi tch onc e theengine starts.



25

G E A R S H I F T I N G ,R I D I N G & S T O P P I N G

To shift to 2 nd andhigher gears, closethrottle, operate theclu tch lever and

press the gear pedalwith heel.

NOTE :

Gear shift pedal is on the left side of themotorcycle.

Turn theignitionswitch to‘OFF’

pos ition .

Turn fueltap ‘OFF’

To stop the vehicle,close throttle, applyfront brake with righthand and rear brakeswith right legsimultaneously. Shiftgears in to neut ra l

bef ore the moto rc ycle ju st c om es to a

complete stop.



26

P A R K I N G

Select a firm, flat surface.Extend side stand. Tilt the motorcycle tothe left, till it is supported firmly.

Select a firm, flat surface.

Hold handle bar straight.

Lower center stand, such that, both the legsof the stand are resting on firm ground.

Apply pressure on the fulcrum lever on thecenter stand and pull vehicle backward.

WARNING

Ensure both the stands are retracted fully beforeriding the motorcycle.Please exercise extreme care while parking andensure it is parked firmly to avoid the motorcycle

from falling over and causing injury to you or toothers and damage to the motorcycle parts.

PARKING VEHICLE ON CENTER STAND PARKING VEHICLE ON SIDE STAND



27

T O O L S &F I R S T A I D K I T

1. Tool bag 1

2. Screw driver O6 X 160 1

3. Tommy bar 1

4. Tubular spanner 1

5. Tool- Spark plug 1

6. Double end spanner 10 X 12 2

1. Antiseptic cream 5 gms 1

2 . Wa sh proo f p las ter 1.9 cm x 7 .2 cm 2

3. Gauze bandage 5 cm x 2 cm 1

4. Sterilized Ga uze Swab 5 cm x 5 cm 2

5 . Steri lized elast ic plaster 7 cm x 6 cm 1

6. Elast ic Gauze bandage 8 cm x 1 mtr. 1

7. First aid kit pouch 1

3

1 2 3 4 5 6

S.No. Description Qty.S.No. Description Qty.

1

5

6

7

2

4



28

P E R I O D I C A LM A I N T E N A N C E

The maintenance schedule detailed here will help you maintain your Bullet Electra 350 UCE meticulouslyand to get a long trouble free service. The schedule provided herein is based upon average ridingconditions and indicates the Kms at which regular inspections, adjustments, replacements andlubrications are to be carried out. The frequency of the maintenance must be shortened dependingupon the severity of the driving condition or if the motorcycle is used in a very dusty environment.Contact the nearest Royal Enfield Authorised Dealer / Service P oint for expert advice and to car ry outthe required maintenance.

S.No. DESCRIPTION FREE SERVICE

whichever is earlierPAID SERVICE

Kms (x 1000) 0.5 3 6 9 12 15 18 21 24 27 3 0

Months 1.5 3 6 9

1 En gi ne O ilR I R I R I R I R I R

Check level at every 1000 Kms or earlier as required

2 Engine oil filter element R C R R R R R

3 Engine sump filter (oil strainer) C C C C C C C

4Magnetic drain plug under gear box and secondary

C C C C C C Cdrain plug under crankshaft in crankcase RH

5 Spark plug - 2nos. A A A A A R A A A A R

6 HT leads for crack I I I I I I I I I I I

7 Air filter paper element C C C C R C C C R C C

8 Carburetor (C.V. Type) *Clean, Inspect and Tune



29




Kms (x 1000) 0.5 3 6 9 12 15 18 21 24 27 3 0

Months 1.5 3 6 9

9 Fuel Tap Filter C C C C C C C C C C C

10 Fuel tank C C C C

11 Fuel hose / Pipe I I I R I I I R I I

12 Accelerator and carburetor cable play Adjustment A A A A A A A A A A A

13 Rubber hose, Air filter to Carburetor I I I I R I I I R I I14 Rubber hose, Inlet manifold I I I I R I I I R I I

15 Inlet / Exhaust valve seating I I

16 Cylinder head (Combustion chamber) D

17 Exhaust system D

18 Clutch lever free play Adjust every 1000 Kms or earlier as required

19 Rear brake pedal pivot L L L L L L L L L L L

20 Battery terminals (apply petroleum jelly) C C C C C C C C C C C

21 Battery Electrolyte level I I I I I I I I I I I

22 Earth wire eyelet (behind battery carrier) I I

23 Rear Cha in Lubricate &Adjust every 1000 Kms or earlier as required R

Clean, Adjust & Lubricate every 3000 Kms or earlier as required



30




Kms (x 1000) 0.5 3 6 9 12 15 18 21 24 27 3 0

Months 1.5 3 6 9

NOTE :For Maintenance after 30,000 Kms, Please repeat the same frequency specified above, inconsultation with a Royal Enfield Authorised Dealer / Service Point.

* Refer Service Manual.

A : A dju st C : Cle an D : De -c ar bo ni se I : In spe ct L : Lub ric ate R : Re pla ce

24 Front Fork oil / leakI R I R I

Check level at every 3000 Kms or earlier as required

2 5 Hand levers & kick starter pivot Lubricate every 1000 Kms or earlier as required

26 Rear brake play Adjust every 1000 Kms or earlier as required

27 Rear brake cam L L L L L

28 Steering ball races / Play Adjustment A L A R A L A R A L

29 Spokes tightness & Wheel rim run out front / rear I I I I I I I

30 Rear wheel cush rubbers I&R I&R

31 Swing Arm spacer & pivot bush L L L R

32 Tyre wear Front & Rear I I I I I I I I I

33 Brake Oil level check / Replacement I I I I I I I I I I I

34 Pivot-Side stand, Center stand, Pillion foot rest L L L L L L L L L L L



31

R E C O M M E N D E DL U B R I C A N T S

CAUTION :Use of Wrong grade oil can reduce the life of themoving parts and seriously affect performance

ISO 14001 – EMSOperation Control Process

1. All customers are advised timely replacement of Engine Oil, Fork Oil & Brake Oil at the dealership/ASP. In case done privately, it is advise to reachold/used Oil to our authorised vendor through REDealer/ASP

2. Similarly we advise for disposal of old/usedBattery, Tube & Tyres as mentioned in above pointNo.1.

Engine Oil

Grade Royal Enfield 15 W 50 API SLEngine Oil(JASO MA)

Front Fork OilGrade Ro yal En fie ld

Front Fork Oil(or 1F GradeEndurance)

Capacity 195 ml/leg

Brake Fluid

Grade DOT 3 or DOT 4

Capacity 60ml

NOTE :Recommendation subject to change without notice.* Common oil for Engine, Gear box & Clutch.DO NOT Mix DOT 3 & DOT 4 b rake fluid together.

Capacity 2.75 Ltrs. (with oil filter)2.50 Ltrs. (during oil & filterelement replacement)



32

D O I T Y O U R S E L F

The following simple maintenance activities willhelp in maintaining your motorcycle. Howeverfor an elaborate maintenance, we recommendyou to get in touch with an Authorised Dealer /Service Point.

CONTROL CABLES

Lubricate after using the motorcycle in rain,after waterwash or if used in dusty conditions.

HAND LEVER & KICK STARTER PIVOTS

Wipe the area free of dirt / grease.

Apply a few drops of oil on the pivots.

CENTER / SIDESTAND PIVOTSApply a few drops of oilon the p ivots af terc leaning the area of

dirt.



33


BRAKE FLUID

Check if oil is below‘MIN’ level. To top up,

Remove cover anddiaphragm.

Top up with DOT 3 orDOT 4 as s pecified.

DRIVE CHAINClean the drive chain carefully of dirt. Applyfew drops of 90 grade oil while simultaneouslyrotating the rear wheel. Wipe off the excess oil.

OIL LEVEL INSPECTIONPlace motorcycle on its center stand on a firmsurface.Warm up engine for a few minutes & switch

off before checking oil level.The level is correct if the oil level is in themiddle of the oil level window.Top up with recommended oil if required.

CAUTION :Use of wrong gradeor spurious oil canseriously affectm o t o r c y c l e

pe rfo rma nce &damage to moving

partsMI N

M AX

CAUTION :

Don’t mix DOT 3 &DOT 4 fluid.



35

Cleaning and adjusting Plug gap

SPARK PLUG

Two spark plugs are pr ov id ed in yo urvehicleRemove spark plugusing the plugspanner and tommy

bar .Clean the insulatortip and electrodes of the plug carefullyusing a pointedscraper or spark plugcleaner.

Set the gap between0.70 to 0.80 mm.

Refit the spark plugon the cylinder head.

INSPECTION OF TYRES AND WHEELSInspect the tyres periodically fortread wear, cracks and cuts.

Minimum tread depth :

Front tyre : 1mm

Rear tyre : 2 mm


Check and remove stone, splinters,nails or other particles embeddedin the tyre treads.Bald spots / swel l ing may be caused byinternal damage. Replace the tyres , i f defective.Replace tyres when the tread depth has rea chedthe minimum as specified.P e r i o d i c a l l y i n s p e c t w h e e l s f o r s p o k e s

bre akag e and whe el rim run out.Check proper se ating of the tyre beading onthe rim whenever the tyre is reassembled.Whenever a new tyre is installed, ensure rimand spokes do not get damaged on accountof using wrong levers.

Use only standard tyres & tubes inflated tocorrect pressure.

Repeat the above procedure for the secondarysparkplug.

Gap 0.70 to 0.80 mm.



36


Front RearSolo 1.41 kg/cm 2 (20 PSI) 2.11 kg/cm 2 (30 PSI)With Pillion 1.55 kg/cm 2 (22 PSI) 2.20kg/cm 2 (32 PSI)

Remove the axle nut along with washer.

Tap and remove the front wheel spindle

Tilt the vehicle to RH Side and take out thewheel along with speedo drive and RH sidespacer.

Take out Speedo drive and bush on the RH

side.

FRONT WHEEL REMOVALPlace the vehicle on center stand

Place a wooden block the front end of engineto support the vehicle.

Disconnect speedo cable.

Loosen the pinch bolt on the RH fork guide.

Tyre Pressure



37


Refit the washer and tighten the nut firmly.

NOTE :Ensure that the speedo drive is correctly locatedsuch that the cable can be connected withoutdifficulty.

Place a 4 mm thick wooden piece or cardboardsheet between the brake pads to avoid brake

pads getting locked.

CAUTION :Do not press the front brake lever when wheel isremoved as this will result in brake pads gettinglocked.

FRONT WHEEL REASSEMBLY

Remove the wooden piece / card board sheet placed between the br ake pads.

Place the speedo drive bush in position and place speedo drive over it.

Insert the wheel along with speedo drive andRH spacer between the front fork endsensuring that the brake disc is located betweenthe brake pads.

Insert and tap the front wheel axle gentlyinside.



38


Rotate the wheel and check for smoothrotation.

Connect the speedo cable to speedo drive andcheck for proper working of speedo meter.

Tighten the pinch bolt on the RH fork guide. REAR WHEEL REMOVAL

Place vehicle on center stand on a firm andflat surface.

Note and mark the position of the chainadjus ter but t ingwith the stopper onthe right side.

Remove split pin

and castle nut onthe RH side.

R e m o v e w h e e ls p i n d l e f r o m L Hs i d e a l o n g w i t hc h a i n a d j u s t e r,taking care not tod r o p t h e w h e e lcollar and spacerfrom the RH side of the wheel.

Tilt vehicle to LHside and slide out

rear wheel.



39

Tighten the lock nut

Check for f reerotation of rearwheel.

REAR BRAKE PEDAL HEIGHT

Loosen the lock nut

Turn in or out the ped al sto p pin tillthe brake pedal andfront foot rest arein the same heightas shown in fig.


REAR WHEEL REASSEMBLY Ensure the four cush rubbers are in positioninside the rear wheelhub.

Tilt vehicle to righta n d i n s e r t w h e e lassembly between theswing arms.

P o s i t i o n t h e r e a rw h e e l w i t h c u s hr u b b e r o n t h e r e a rchain sprocket.

Hold wheel collar and spacer in position.Insert the wheel spindle along with chainadjuster from the LH side of vehicle andgently tap it through the wheel.

Ensure that the mark on the chain adjusternotch butts with the stopper.

Tighten the castle nut firmly and ensure thatthe hole on axle shaft and the slot on castlenut are aligned to enable split pin fitment.

Fit the split pin.

CAUTION :Do not force the spindle into the wheel asthe threads may get damaged. Tap it throughthe wheel gently.



40


REAR BRAKE

Turn in or out the adjuster nut at the brakerod end. The recommanded brake pedal travelis 20 - 30 mm.

Check that the brake is not binding and therear wheel rotates freely.

DRIVE CHAIN TENSION (Play 25-30mm)

R e m o v e r e a rwheel split pin.

Loosen cas t lenut , sp indlenut , anchornut and brakerod nut.

Turn the adjuster cams on both sides, till 25to 30 mm slackness is achieved.

Check and ensure that the number of notchesfrom the punch mark on the cam to the notchresting on the pin are equal on both sides.

Apply brake and tighten all nuts.20 to 30 mm



42

Insert ‘C’ type spring adjuster tool in theshocker shot and ro ta te in requi reddirection.

Turn the adjuster such that the adjustermoves up to increase the spring tensiona n d v i c e v e r s a t o r e d u c e t h e s p r i n gtension.

Adjust both left hand and right hand

shock absorbers so that the same notchrests on the pin in both.

WARNING

Riding the motorcycle with the notches adjustedin different positions can cause loss of controland may lead to an ac cident.


REMOVAL OF BATTERY FROM THE VEHICLE

I n s e r t t h e k e yinto the batteryc o v e r l o c k , L HSide turnant ic lock wiseand hold it there.

R e m o v e t h e b at te r y c ov e ro u t w a r d s

b ri n gi ng do w noff from the lock

peg on top.

Disconnect boththe terminalwires . (pos i t iveand negative)

Remove the bolts on either side and opencover. Then take out the Battery



43

REASSEMBLY OF BATTERY ON VEHICLE

Connect the positive terminal (Both Redwire).

Connect the negative terminal (Green & Blackwire).

Smear the terminals with petroleum jelly.

Close the battery cover and tighten the bolt

Position the battery cover over the batterysuch that it engages with the lock peg ontop.

Push the lock assembly inside the locator.Turn the key clock wise to lock the batterycover. Then release the key.

CAUTION :

Do not use battery with low electrolyte levelas the battery internals will get damaged.

Do not overfill the battery electrolyte as it willspill ot through the over flow pipe and cause

corrosion to vehicle parts.

BATTERY &MAINTENANCE

The vehic le i s pr o v id ed w it h12V - 14 AH (forE-Star t ) and12V - 5 AH (forKick Start)P e r i o d i c a l l ycheck the Battery for- Cleanliness and corrosion free terminals.- Electrolyte level in each cell .If electrolyte lev el is low, top up with distilledwater.

CAUTION :Electrolyte sha ll be filled only between minimum& maximum levels indicated in battery as “min”& “max” respectively. Usage of battery withelectrolyte be low the minimum level will damage

ba tte ry in te rn al s an d el ec tr ol yt e ab ov e th emaximum level will result in spillage of ac id.

Use only distilled water meant for use in batteriesto avoid damage to battery.




44

Use only distilled water meant for use in batteries to avoid damage to b attery.

Clean the wire terminals free of corr osion andkeep the terminals coated with petroleum jelly.

CHANGING ELECTRICAL COMPONENTS

HEAD LAMP BULB

CAUTION :

Never touch the bulb with your finger. Finger

prints will etch the glass and decr ease bulb life.

Hence, it is recommended to grab the bulb with

paper or c lean dry cloth dur ing hand ling.

REMOVING THE HEADLAMP

Loosen the rim holding screw on top and take

out the headlight reflector.

Unscrew and remove the bulb holder.


Pull out the bulb.

Replace bulb and assemble in the reverse order.



45


FUSE

Open the LH tool bo x

Open the fusecarrier

Replace fuse andclose the Tool box.

TAIL LAMP BULB

Remove the taillamp coverscrews.

Unscrew and pullout the bulb.

Replace bulb andassemble in thereverse order.

TRAFFICATORBULB

Remove the screws& take out traffi-cator glass cover.

Press bulb gently& Turn ant i -clockwise to takeout the bulb.

Position the new bulb insid e h olde r, e nsu ring that the hold er,ensurin g that the pins in the bulb, match withthe slots in the holder.

Press the bulb and turn clockwise to lock the bulb in the hold er.

Refit the trafficator cover and screws.

Fuse No. Color Remarks

1 Blue Main Fuse (15A)

2 Red Ignition Fuse (10A)

3 Red Spare Fuse (10A)

4 Blue Spare Fuse (15A)

1 2 3 4

BLADE FUSE USAGE LIST



46

PRECAUTIONS

Wash vehicle when the engine is cold.

Cover the silencer, tail pipe, carburetor, hornand control switches with suitable plastic

bag s an d tie it firmly to pr eve nt wa ter entr y.

Remove ignition key and seal key hole usingadhesive tape.

Brush engine area with kerosene / diesel to

remove dirt or grease.Use low pressure jet of water to clean thevehicle or engine.

Never spray water with great force on headlamp, speedometer, flasher lights, front andrear wheel hubs, electrical connections andwires, control cables, carburetor, sparkplug,

ba tter y etc .

Do not apply kerosene or diesel on painted par ts or rub ber par ts.

Use luke warm water and mild detergent onthe painted components to remove dirt, etc.

Rinse vehicle thoroughly with plain water toremove the detergent and wipe vehicle dry.

If possible, use compressed air and blow off water particles from the obscure areas of thevehicle, electrical connections etc.

AFTER WASHING

Ensure, the vehicle is throughly dry bywiping with a clean soft absorbent cloth orchamois leather.

Remove all plastic bags and adhesive tapes.

Lubricate control cables, pivot and rear chainwith lube oil

Polish the painted and plated surfaces using polis hing wax .

Start engine and allow to run at i dling speedfor a few minutes to warm up engine.

Drive the motorcycle slowly, applying both br ake s int er mit ten tly to dr y up the br ak eshoes.

Test brakes for its efficiency.

W A S H I N GP R O C E D U R E



47

Incase your Motorcycle is not going to be usedfor a month or more, we advice the following

pre caut ions to the take n.

Carryout required re pair / adjustments on themotorcycle.

Wash the motorcycle thoroughly andlubricate as per the maintenance chart.

Drain fuel tank, fuel line and carburetor.

Keep the fuel tap in closed position and spraymotor oil inside the fuel tank to preventrusting.

Remove spark plug. Pour in about 25ml of clean engine oil through spark plug hole.Close the hole and crank engine several timesand refit sparkplug.

Clean rear chain thoroughly and apply a thinfilm of lub oil.

Remove battery from the bike. Clean theterminals free of corrosion.

Maintain electrolyte level between max or minmark, by adding distilled water and wipe the

batte ry dry .

Store the battery in a cool, dry and wellventilated place.

Do not place the battery in direct sun light,near open flame or where temperature isabove 40 oC or below 0 oC

Cover the silencer with plastic bags to preventmoisture entry. Set the motorcycle on itscenter stand.

Apply a thin film of oil on the engine b arrelfins, cylinder head fins and other painted

pa rts .

Apply anti rust solutions on all plated parts.Take care not to apply this solution on rubberor painted parts.

Store motorcycle in a clean covered area free- of moisture and keep it covered to preventdust settling on it.

S T O R A G EP R E C A U T I O N S



48

PREPARING THE MOTORCYCLE FORREUSE

Remove the anti rust solution from all plated par ts and clea n the motor cyc le well .

Inflate the tyres to the correct tyre pressure.

Ensure battery is fully charged and properelectrolyte level is maintained.

Connect the battery.

Lubricate all control cables and pivots.

Check proper level of oil in engine.

Clean and remove the motor oil from tankand fill tank with fresh petrol.

Clean carburetor and air filter.

Remove plastic covering from the silencer.

Remove spark plug on cylinder head and pourin a few drops of engine oil. Crank engine afew times to lubricate cylinder walls and

pisto n. Clea n spa rk plug and refi t.

Switch on ignition switch.

Start vehicle and warm up engine for a fewminutes before riding the vehicle.

NOTE :Do not raise the engine rpm the moment it isstarted, allow the engine to run at idlingspeed.

S T O R A G EP R E C A U T I O N S



49

L O N G T R I PP R E C A U T I O N S

Checks prior to the commencement of long journey

Service the motorcycle thoroughly a RoyalEnfield Authorised Service Point as per

per iodic al main tena nce cha rt.

Sufficient quantity of petrol in the fuel tankfor the journey planned.

Correct tyre pressure.

Checks after every 1500 kms of run

Tightness of all fasteners.

Tyre tread condition and wear of tyres.

Battery condition and electrolyte level.

Working of all lights and horn.

Correct oil level in engine.

Proper chain tension.

Items to be carried

Tool kit

First aid kit.

Bulbs for Headlight, Trafficator light, RearTail Lamp and Fuse.

Accelerator, Clutch and Speedo Cable.

Rear chain link master lock assembly.

Spare tube, tyre puncture repair kit - coldvulcanising type.

Foot operated air pump.

Insulation tape.

Spark plug, spark plug cap, fuel hose.



51

Properly tuned and adjusted engine.

CUT OFF NEEDLESS LOW IDLING

Ten minutes of low idling wastes 70 ml. of petrol.

So cut off the engine when you kn ow you have

to wait for one minute or more.

STOP

Revving Ten revvings wastes 20 ml. of

pet rol

Racing starts Ten racing starts wastes

150 ml. of petrol.

Sudden acceleration Ten sudden

accelerations wastes 100 ml. of petrol.

STOP BRAKE RIDING

Brake riding pushes the brake shoes / pads

to come in contact with revolving drum / disc.

To overcome the resulting frictional load,

engine burns additional petrol.

Result : Low mileage, loss of power, faster

wear of brake shoes / pads and drum / disc.

NEVER CLUTCH RIDE

Clutch riding slips the clutch & engine drive

does not get totally transferred to the rear

wheel. Besides low mileage, clutch riding

ends up with burnt friction plates of clutch,

loss of power and engine overheating.

C A R I N G F O RM I L E A G E



52

C A R I N G F O RM I L E A G E

AVOID FREQUENT BRAKING

Braking arrests the road speed. Motorcycle

momentum is reduced. Additional fuel is

bur nt for sub seq uen t acc ele rati on.

For better mileage, use front and rear brakes

only when absolutely needed. Control ve hicle

speed with throttle and gear like smart riders

always do.

AVOID OVER LOADING

Over loading tires the engine, wears the parts

faster and reduces mileage.

PARK YOUR VEHICLE IN SHADE WHENNOT IN USE

Petrol is highly volatile. It evaporates under

n o r m a l a t m o s p h e r i c t e m p e r a t u r e . T h e

evapor t ion increases wi th tempera ture .

Prevent this loss by always parking your

vehicle under shade.

Too few Kms. running per day allows more

time for evaporation affecting the mileage.



53

COMPLETE WIRING DIAGRAM

Basic Guidelines to be followed “FOR ALL ELECTRIC START VEHICLES”

1. In cold condition of the engine or for initial start, it is advised to use electric start (ES)only.

2. Apply choke in cold start condition. (ambient temperature <25° C)

3. DO NOT ATTEMPT – “HALF START” BY CASUALLY PRESSING ELECTRIC START

BUTTON.

4. PLEASE PRESS AND HOLD ELECTRIC START BUTTON FOR ATLEAST 3 SECONDSCONTINUOUSLY FOR THE CRANKING OR UNTIL THE ENGINE FIRES AND SUSTAINS,WHICHEVER IS EARLIER.

5. If engine doesn’t start in the first attempt, release the ES button and repeat the aboveProcedure.

6. It is advised not to apply excessive throttle during starting.

Vehicle Starting Procedure



54

T R O U B L ES H O O T I N G

I. ENGINE FAILS TO START

1) Ignition switch in ‘OFF’ Position ............................. Switch on ignition.

2) Stop switch in ‘OFF’ Position.................................... Push stop switch to ‘ON’ position.

3) Clogged fuel line / tap ................................................ Clean the fuel line / tap.

4) Vent hole clogged in fuel tank cap .......................... Clean vent hole.

5) Carburetor passage & jets blocked......................... * Dismantle carburetor & clean jets

...................................................................................... / passag es6) Carburetor float stuck in closed position ............... Ensure correct movement of float

7) Spark plug cap / lead not connected......................... Fix cap / lead firmly

8) Loose HT connections ................................................ Fix connections firmly

9) HT Lead Damaged .................................................... * Replace HT Lead

10) Spark plug electrode dirty / fouled ........................... Clean spark plug & Reset gap.

11) Spark plug insulation cracked ................................. Replace spark plug

12) Poor compression :- Auto Decompressor not working ......................... * Ensure free motion of flyweight in exhaust...................................................................................... cam gear assemb ly

CAUSES REMEDIES

* Contact Authorised Dealer / Service Point



55

CAUSES REMEDIES



- Loose spark plug.................................................... * Tighten spark plug.

13) Clutch slipping ......................................................... * Adjust clutch cable free play

II. ENGINE MISFIRING

1) Water in petrol tank/carburetor ............................. * Clean carburetor / petrol tank. Fill tank...................................................................................... with fresh petrol.

2) Leak through intake hose ......................................... Tighten rubber hose suitably....................................................................................... Replace if nece ssary

3) Loose spark plug cap ................................................. Fix cap / lead firmly

4) Spark plug fouled/insulation broken ....................... Clean / reset gap or, replace.

5) Poor Compression ..................................................... * Auto decompressor sticky or...................................................................................... not working

III. ENGINE STARTS, BUT RUNS IRREGULARLY & STOPS

1) Faulty fuel supply ..................................................... Clean the fuel line / tap / vent hole

2) Very low idling speed ................................................. Increase idling speed



56

CAUSES REMEDIES



IV. POOR PICKUP

1) Accelerator cable free play excessive ....................... Adjust cable free play

2) Faulty fuel supply ...................................................... Clean the fuel line / tap / vent hole

3) Choked air filter ......................................................... Clean / Replace air filter

4) Loose carburetor mounting ...................................... Tighten clamps firmly

5) Brakes adjusted too tight........................................ * Re-adjust properly

6) Rear chain adjusted too tight ................................. * Re-adjust properly7) Clutch Slipping ......................................................... * Adjust clutch cable free play

8) Under inflated tyres ................................................. * Inflate to correct pressure

9) TPS setting ................................................................ * Retard / Wrong setting

V. WHITE/BLUE SMOKE

1) Oil level in RH Crankcase cover window .................above “MAX” line ..................................................... * Check and drain excess oil



57

CAUSES REMEDIES



VI. ENGINE OVERHEATING

1) Cylinder fins not clean .............................................. Clean the cylinder fins at...................................................................................... regular interva ls

2) Clutch slipping ......................................................... * Check and correct

3) Suction leakage ........................................................ * Check and correct

4) Incorrect carburetor adjustments .......................... * Check and correct

5) TPS setting................................................................ * Advance / wrong setting

VII. EXCESSIVE FUEL CONSUMPTION

1) Fuel leakage .............................................................. * Check and rectify

2) Worn out carburetor jets ........................................ * Change the defective jets

3) Incorrect carburetor adjustments .......................... * Check and adjust correctly4) Choked air filter ......................................................... Clean / Replace

5) Poor compression ..................................................... * Auto decompressor sticky or...................................................................................... not working proper ly

6) Under inflated tyres ................................................... Inflate to correct pressure

7) TPS setting ................................................................ * Over advance / wrong setting



59

XI. Electricals u lbs do not l ight1) Loose / improper connection ................................... * Check and correct2) Bulb fused ................................................................. * Replace bulb3) Fuse blown ................................................................ * Replace fuse4) Switch defective ........................................................ * Replace switchHorn not working1) Loose connections .................................................... * Check and correct

2) Requires tuning ........................................................ * Tune horn3) Switch Defective ........................................................ * Replace4) Fuse blown .................................................................. Replace fuseTrafficators not working1) Loose / improper connections ................................... Check and correct2) Bulb fused / fuse blown ............................................. Replace3) Switch defective ........................................................ * Replace4) I.C. Flasher defective ............................................... * ReplaceBrake light remains on(1) Switch not adjusted properly .................................. * Adjust switch properly(2) Switch sticky ............................................................. * Replace switch

CAUSES REMEDIES





60

XII. ELECTRIC START

Vehic le not s tar t ing

(1) Neutral indicator not glowing ................................. Bring the vehicle in neutral

(2) If vehicle is without neutral indicator .................... Press the clutch lever & start switch together

(3) Loose Connection...................................................... * Check & Correct

(4) Starter relay not working ....................................... * Check & Replace

(5) Malfunctioning of clutch switch ............................ * Check & Replace(6) Malfunctioning of Starter switch........................... * Check & Replace

(7) Battery discharge ..................................................... * Check & Recharge

(8) Motor not working .................................................. * Check & Replace

(9) Battery not fully charged........................................ * Check & charge

(10)Failure of sprag clutch ............................................ * Check & replace

CAUSES REMEDIES





61

Royal Enfield Motor Cycles are manufactured by following best Quality practices in respect of thematerial and workmanship.

Royal Enfield (RE) warrants Bullet Electra 350 UCE motor cycle to be free from manufacturing andmaterial defect under normal use subject to following conditions.

1. RE will replace or repair defective part / parts at their Authorised Dealer / Service Point, free of charge within a period of 12 months from the date of sale (date of Installation) or 10,000 kmswhichever occurs earlier.

2. The warranty is applicable only to first registered owner.3. The warranty shall be applicable only if all the free services are availed at the respective period /

kilometer range as per the schedule given in the owner’s manual from RE Authorised Dealer /Service Point.

4. During the warranty period, RE’s obligations shall be limited to repairing / replacing free of chargesuch part or parts of the vehicle, which on examination to have manufacturing defect. Such defective

part / parts which h ave be en r eplaced become proper ty of RE.5. Cost of oil, oil filter, fuel and other consumables are chargeable to the customer.6. Claims on proprietary items like tyres, tubes, spark plug, battery etc. should be taken up with

respective manufacturer or their authorised agents in the area directly by customer. RE shall not be lia ble in any ma nner to repla ce them though th eir Dea lers w ill provid e as sistance in pre ferringsuch claims on their manufacturer.

7. Warranty shall not apply to:

(a) Normal ageing, detoriation or rusting of plated parts paints coat, rubber parts, soft items,glass items, plastic parts etc.

W A R R A N T Y T E R M S &C O N D I T I O N S



62

(b) Components like fuel filter, oil filter paper element, control cables, brake shoes / brake pads,clutch plates, drive chain & sprocket kit, which are subjected to normal wear and tear.

(c) Damages due to use of lubricant / oil / grease etc. other than specified by RE.

(d) Damages due to use of non-genuine parts.

(e) Damages due to lack of proper maintenance of the vehicle.

(f) Damages due to incorrect driving or riding habits.

(g) Parts damaged due to accidents, collision, abuse etc.

(h) Irregularities not recognized as affecting the quality or function of the vehicle such as slight

vibration, oil leakage, discoloration of exhaust bent pipe / silencer / soft, hard shock absorberetc.

(i) Defects arising from fitment of unauthorised / additional Electrical loads.

(j) Vehicle serviced / repaired at unauthorised service points.

(k) Vehicle used for competition / racing.

(l) Electrical component likes bulbs, fuses etc.

(m) Normal maintenance operations like adjustment of brakes, cleaning fuel system, engine tuneup and other such adjustments

8. RE reserves the right to finally decide on all warranty claims

9. RE reserves the right to make changes in Design of the vehicle without any obligation to install

these changes on previously supplied vehicles.

W A R R A N T Y T E R M S &C O N D I T I O N S



63

E M I S S I O NW A R R A N T Y

In compliance with the provisions of Rule 115(2) of the Central Motor Vehicle Rules, 1989, RoyalEnfield certifies that the following warranty is applicable to those components liable to affect theemission of the gaseous pollutants in its range of motorcycles, in normal use to which it may besubjected to.This emission warranty comes into force from 01st July 2001 and is valid for a period of 30,000 Kms.or 36 months, whichever occur s earlier, from the date of sale to the first customer and is in ad dition toand parallel to the warranty policy, conditions and obligations laid down in the Owner’s Manual.

Royal Enfield further warranty that if on examination by its Authorised Dealer / Service Point, themotorcycle fail to meet the specified emission standards, then the Authorised Dealer / Service Pointshall take necessary corrective measures and shall at its sole discretion, repair or replace free of

charge such components of the emission control system to meet the required emission standards.The method/s of examination to determine the warranty conditions of the emission warranty relatedcomponents will be at the sole discretion of Royal Enfield and / or our Authorised Dealer / Service Pointand results of s uch examination will be final and binding. If on examination the warranty conditionsof the part/s is/are not established, Royal enfield will have the right to charge all, or part of the cost of such examination to the customer in addition to the cost of the components.In case of acceptance of the component/s under Emission warranty, Royal Enfield will replace free of charge, the component/s as required. However, the consumables like fuel, lubricants, solvents, etcshall be chargeable to the customer as per actuals.In case any of the components covered under emission warranty or the associated parts, are notindependently replaceable. Royal Enfield will have the sole discretion to replace either the entire asse mblyor parts of the assembly, through suitable repairs.Royal Enfield reserves the right to carry out necessary consequential repairs to the motorcycle or



64


replace any part, in addition to the repair or replacement of the components covered under emissionwarranty, to establish compliance to in-use emission standards. Such repairs / replacements will bechargeable to the customer.All parts removed for replacement under warranty will become the property of Royal Enfield.Royal Enfield will not be responsible for the cost of transportation of the motorcycle to the nearestAuthorised Dealer / Service Point OR for any loss due to no n availability of the motorcycle during the

period of ex amination and re pairs by Ro yal Enfield and / or their Authorise d Dealer / Ser vice Point.

Royal Enfield will not be responsible for any penalties that may be charged by statuatory authoritieson account of failure to comply with the in-use emission standards.That cost/s incurred to check emission of the motorcycle will have to be borne by the customer.Emission warranty will be applicable irrespective of the change of ownership of the vehicle providedall the conditions as laid down in this document are met from the date of original sale of the motorcycle.

The warranty shall apply if the customer :Observes all the important instructions and any other precautions listed in the owner’s manual.

Under all circumstances uses lubricants and fuel as recommended by Royal Enfield.Regularly obtains and carries out maintenance in accordance with Royal Enfield guidelines andenters the details in the Log book.

Immediately approaches the nearest Authorised Dealer / Service Point upon discovery of failure tocomply with the IN-USE emission standard inspite of having maintained and used the vehicle inaccordance with the instructions in the owner’s manual and having carried out such repairs andadjustments as may be r equired with a view to establish such compliance.

Produces the ‘Pollution Under Control’ certificate valid for the period immediately preceding the



66


that any of the conditions stipulated in the Owner’s manual with regard to use and maintenancehave been violated.The motorcycle has been run o n adulterated / leaded fuel or lubricant other than those specified byRoyal Enfield in the Owner’s manual or any other document given to the customer at the time of sale of the motorcycle.The emission related components are tampered with.All service and parts related bills and vouchers incurred during the tenure of the emission warrantyis not produced.All maintenance activities carried out on the vehicle during the tenure of the e mission warranty isnot entered in the log book.

Tips to be on the right side of LawAlways get your vehicle checked to meet the emission regulations through and authorised emissionchecking centre.Always carry a valid ‘Pollution Under Control’ certificate with you at all times during the validityof the emission warranty (30,000 Kms / 3 years from the date of first sale)

Tips to reduce pollution1. Ensure that the periodical maintenance is carried out as stipulated in the owner’s manual through

a Royal Enfield Authorised Dealer / Service Point.2. Use only Unleaded petrol (> 87 Octane) from reputed fuel pumps.3. Ensure the fuel used is not adulterated.4. Use correct spark plug as recommended in the owner’s manual.5. Use lubricants as per recommendations given on grade / brand in the owner’s manual.



67

A L L I N D I A R O A D S I G N S



68

L O G B O O K

Sl.

No.Date Kms. Details

IdlingCo%

Authorised Dealer/Service Point

Job Card No.Stamp &

Signature



69

L O G B O O K

Sl.

No.Date Kms. Details

IdlingCo%

Authorised Dealer/Service Point

Job Card No.Stamp &

Signature



70

It is our endeavour to provide excellent service to your Royal Enfield Motor Cycle at all times. Towardsthis we provide four free services at specific Intervals.

Please avail these services at the specified time, in any of the Royal Enfield Authorised Dealer /Service Point nearest to you and as a token of satisfactory service, kindly return the free servicecoupon duly filled in and signed, to the service outlet.

Availing the free services in the sp ecified time is a prerequisite to warranty consideration.

The cost of fuel, oil, oil filter element, grease etc. used for free service is chargeable to the customer.

F R E E S E R V I C EC O U P O N S



72

1. Water wash the vehicle and dry it with a clean cloth2. Elec trol yte..................................................... Check level & top-up3. Battery terminals......................................... Clean and apply petroleum jelly4. Drive chain free play................................... Check, clean, lubricate & adjust5. Rear brake pedal pivot................................ Lubricate6. Front & Rear brakes..................................... Check & Adjust7. Wheel rims front & rear............................. Check spokes tightness8. Front fork oil leak........................................ Check for leakage9. Air filter element ....................................... Clean10. Spark plugs (2 Nos)..................................... Check, clean & adjust gap11. H.T. Leads....................................................... Inspect for cracks12. Carbu reto r...................................................... Clean & tune13. Fuel filter........................................................ Clea n14. Fuel pipe......................................................... Inspect for cra cks15. Rubber hose, Air filter to carburetor....... Inspect for cracks16. Rubber hose, inlet manifold........................ Inspect for cracks17. Accelerator / TPS cable................................ Check & adjust play18. Clutch cable.................................................... Adjust play19. Engine oil sump strainer............................ Clean20. Engine oil....................................................... Re pla ce21. Engine oil filter paper element.................. Rep lace22. Hand levers & kick starter pivot................ Lubricate

1 s t F R E E S E R V I C E A C T I V I T I E S

Job Card No:

Date :

Odo Reading :

Name of Dealer /ASP with Code:..........................

..........................

ASP / Dealer’sStamp & Signature

Customer Copy



73

3000 KMS or 90+15 DAYS WHICHEVER IS EARLIER FROM THE DATE OF SALE

Customer Name : Dealer Code :

Address :

2ndFree

Service3000 Kms

or90+15 days

whichever isearlier from the

date of sale

Enter the Details inFree Service

Record

2 n dF R E E S E R V I C E

(Cost of oil,oil filter element

and otherconsumables

used arechargeable tothe customer)

Received the above vehicle after the service having been done to my entire satisfaction.

Customer’s Signature : ................................. Date :

Contact Phone / Mobile No.:

Regn. No:

Sale Date:

Serviced Date:

Serviced by (Dealer’s/ASP Name &Address)

Frame No:

Engine No:

Vehicle Installation Form No.

ODO Reading :

Sold by (Dealer’s Name & Address)



74

2 n d F R E E S E R V I C E A C T I V I T I E S

1. Water wash the vehicle and dry it with a clean cloth2. Electro lyte ................................................... Check level & top-up3. Battery terminals......................................... Clean and apply petroleum jelly4. Drive chain free play................................. Check, clean, lubricate & adjust5. Rear brake pedal pivot............................... Lubricate6. Front & Rear brakes................................... Check & Adjust7. Wheel rims front & rear............................. Check spokes tightness8. Front fork oil leak........................................ Check for leakage9. Air filter element ....................................... Clean10. Spark plugs (2 Nos).................................... Check, clean & adjust gap11. H.T. Leads ..................................................... Inspect for cracks12. Carbu retor ................................................... Clean & tune13. Fuel filter...................................................... Clea n14. Fuel pipe....................................................... Inspect for cracks15.Rubber hose, Air filter to carburetor ..... Inspect for cracks16. Rubber hose, inlet manifold...................... Inspect for cracks17. Accelerator / TPS cable.............................. Check & adjust play18. Clutch cable .................................................. Adjust play19. Steering free play........................................ Check & Adjust20. Engine oil...................................................... Check level & top-up21. Hand levers & kick starter pivot.............. Lubricate22. Oil filter element, oil strainer & magnetic drain plug .. Clean

Job Card No:

Date :

Odo Reading :


..........................


Customer Copy



75

3 r dF R E E S E R V I C E



Address :

3rdFree

Service6000 Kms

or180+15 dayswhichever is

earlier from the

date of saleEnter the Details in

Free ServiceRecord







Regn. No:

Sale Date:

Serviced Date:


Frame No:

Engine No:


ODO Reading :




76

3 rd F R E E S E R V I C E A C T I V I T I E S

1. Water wash the vehicle and dry it with a clean cloth2. Electr olyte .................................................... Check level & top-up3. Battery terminals ........................................ Clean and apply petroleum jelly4. Drive chain free play .................................. Check, clean, lubricate & adjust5. Rear brake pedal pivot................................ Lubricate6. Rear brake cam............................................. Cam clean, lubricate & Adjust play7. Wheel rims front & rear.............................. Check spokes tightness8. Front brake ................................................... Check & Adjust9. Tyres front & rear........................................ Check wear and tread depth10. Air filter element ....................................... Clean11. Spark plugs (2 Nos) .................................... Check, clean & adjust gap12. H.T. Leads...................................................... Inspect for cra cks13. Carbu retor ..................................................... Clean & tune14. Fuel filter ....................................................... Clea n15. Fuel pipe ....................................................... Inspect for cracks16. Rubber hose, Air filter to carburetor....... Inspect for cracks17. Rubber hose, inlet manifold........................ Inspect for cracks18. Accelera tor / TPS cable................................ Check & adjust play19. Clutch cable................................................... Adjust play20. Engine oil sump strainer............................ Clea n21. Engine oil ..................................................... Re pla ce22. Engine oil filter element............................. Rep lace23. Hand levers & kick starter pivot.............. Lubricate24. Front Fork oil................................................ Inspe ct25. Swing arm spacer & pivot........................... Lubr icate26. Steeri ng System .......................................... Check, Lub. Steering balls & Adj. play

Job Card No:

Date :

Odo Reading :


..........................


Customer Copy



77

4 t hF R E E S E R V I C E



Address :

4thFree

Service9000 Kms

or270+15 dayswhichever is

earlier from the

date of saleEnter the Details in

Free ServiceRecord







Regn. No:

Sale Date:

Serviced Date:


Frame No:

Engine No:


ODO Reading :




78

1. Water wash the vehicle and dry it with a clean cloth2. Electro lyte..................................................... Check level & top-up3. Battery terminals......................................... Clean and apply petroleum jelly4. Drive chain free play................................... Check, clean, lubricate & adjust5. Rear brake pedal pivot................................ Lubricate6. Front & Rear brakes..................................... Check & Adjust7. Wheel rims front & rear.............................. Check spokes tightness8. Front fork oil................................................. Check level & top-up / replace9. Air filter element ....................................... Clean10. Spark plugs (2 Nos)..................................... Check, clean & adjust gap

11. H.T. Leads...................................................... Inspect for cracks12. Carbu retor .................................................... Clean & tune13. Fuel filter ....................................................... Clea n14. Fuel pipe ........................................................ Re pla ce15. Rubber hose, Air filter to carburetor ...... Inspect for cracks16. Rubber hose, inlet manifold........................ Inspect for cracks17. Accelera tor / TPS cable................................ Check & adjust play18. Clutch cable ................................................... Adjust play19. Engine oil strainer....................................... Clea n20. Engine oil....................................................... Check level & top-up21. Hand levers & kick starter pivot............... Lubricate22. Steering free play......................................... Check & Adjust23. Tyr es................................................................ Check wear and tread depth

4 t h F R E E S E R V I C E A C T I V I T I E S

Job Card No:

Date :

Odo Reading :


..........................


Customer Copy



79

PA I D S E RV I C E / M A I N T E N A N C E R E C O R D

Customer Copy

12,000 + 250 Kms. Service

Job Card No :................. Date : .........................

Odo Reading : ................. Dealer Code : .............

Brief Work Done :

Dealer’s Stamp & Signature

Dealer / ASP Copy


Job Card No :................. Date : .........................


Brief Work Done : Reg. No.:


Customer Copy


Job Card No :................. Date : .........................


Brief Work Done :


Dealer / ASP Copy


Job Card No :................. Date : .........................






80

Customer Copy

12,000 + 2 50 Kms. Service

Brief Work Done :


Customer Copy


Brief Work Done :


Dealer / ASP Copy


Brief Work Done :


Dealer / ASP Copy


Brief Work Done :


PA I D S E RV I C E / M A I N T E N A N C E R E C O R D



81

PA I D S E RV I C E /

M A I N T E N A N C E R E C O R D

Customer Copy


Job Card No :................. Date : .........................


Brief Work Done :


Dealer / ASP Copy


Job Card No :................. Date : .........................




Customer Copy


Job Card No :................. Date : .........................


Brief Work Done :


Dealer / ASP Copy


Job Card No :................. Date : .........................






82

Customer Copy

18,000 + 2 50 Kms. Service

Brief Work Done :


Customer Copy


Brief Work Done :


Dealer / ASP Copy


Brief Work Done :


Dealer / ASP Copy


Brief Work Done :






83



Customer Copy


Job Card No :................. Date : .........................


Brief Work Done :


Dealer / ASP Copy


Job Card No :................. Date : .........................




Customer Copy


Job Card No :................. Date : .........................


Brief Work Done :


Dealer / ASP Copy


Job Card No :................. Date : .........................






84



Customer Copy

24,000 + 2 50 Kms. Service

Brief Work Done :


Customer Copy


Brief Work Done :


Dealer / ASP Copy


Brief Work Done :


Dealer / ASP Copy


Brief Work Done :




86

Customer Copy

30,000 + 2 50 Kms. Service

Brief Work Done :


Customer Copy


Brief Work Done :


Dealer / ASP Copy


Brief Work Done :


Dealer / ASP Copy


Brief Work Done :






87

N O T E S



88

N O T E S



Telephone Residence

Invoice No.

Delivery Note / Advice No.

Bike Regn. No.

Telephone Office

E



Model : Engine No:

Dealer's Name : Location:

Colour : Key Number :

Battery Number : Tyre Number : Front : Rear :

AreaDefectCode

MeasureDefect

#1Defect

#2Defect

#3Remarks

Engine / Vehicle Number Details DF Same

Battery ChargingD / NC / WeakCell

Battery Voltage 12V-whereas13.5 V

Replace oil & oil filter / Check Oil level (3 DrainBolts system Hex 19mm, 8mm X 2nos andHex 12mm head bolts)

EO - (DrainedOil Level)

Fill 2.5 Litres (Capacity is2.75 Litres) - Remove 3Drain Bolts to Drain thecomplete Oil

Clean Primary Oil Strainer screen - Clean

Ignition / Side Air Filter Box / Tool Box Lock /Fuel Tank Lock H / LF / NW Same

Fill Petrol - 5 Litres

Brake Lever Free Play EP / T 2-3 mm / (STD)

Caliper Mounting Bolts LF 2.7 to 3.0 Kgm

Front Wheel Rotation W / T / LF / NFree ( Check SpokesLooseness & Runout

Front Mudguard Alignment / Cover TubeRubbing

M / RB Straight

Front Wheel Nut LF 7.0 to 7.7 Kgm

F ront Ty re Condi ti on (C hec k Ty re Li ne Seat ing) W F Goo d

Front Tyre Pressure LESS 22 PSI

Battery Make :

Aggregate

CHASSIS / ENGINE

NUMBER1

CONNECT BATTERY /CHECK VOLTAGE

2

3

4

LOCK OPERATION 5

PETROL 6

7

8

9

10

11

12

13

ENGINE OIL

FRONT WHEEL

PRE DELIVERY INSPECTION LISTMODEL: BULLET 350 / ELECTRA / CLASSIC 350 / CLASSIC 500 / BULLET 500

(Max. online voltage)



36 Mudguards - Paint / Plating Related SC / PD / R /DN

No Defects (Mudguards /Fuel Tank / Tool Box

37 Fuel Tank - Paint Related SC / PD / R /

DNNo Defects

38 Tool Box LH, Air Filter Box, Battery Cover -Paint / Plating Related

SC / PD / R /DN No Defects

39 Head Lamp Casing - Paint Related SC / PD / R / No Defects

40Powder Coated Parts (Scratch / Rust /Chipped OFF)

S C / PD / R N o D ef ec ts

41 Plated Parts (Scratch / Rusty) SC / R / PONo Defects (Mudguards /Fuel Tank / Wheel Rim /Indicator

42 Buffed components poor Buffing & Scratches SC / DU No Defects

43 Seat Alignment M No Defects

44 Indicators Alignment (MFR / Amber) M No Defect / Colour Lens Colour Check45 Stickers / Knee Pads M / LF / SC No Defects

46 Nuts, Bolts, Fasteners (Torque) LFTight (RH, LH Cover /Engine Foundation /

Accessories / Wheel Nut)

47 Owner's Manual & Tool Kit Content - Availability

48 Spare Fuse in Fuse Carrier NA Tubular / Blade Fuse

49 Starting (Kick Start / Self Start) ST / N Easy Start

50 Front / Rear Brakes Effectiveness / Feel AD / SG Sharp

51 Pulling P Straight

52 Vibration V Smooth53 Wobbling W No Defects

54 Front Fork / Drive Chain Noise N No Defects

55 Engine Performance / Gear Shifting /TPS Setting

N / ST / J / H Smooth

56 Any Rattling / Squeaking Noise NNil (Silencer / Accessories/ Body Parts /Suspension)

57 E St t (H t C diti ) ST / NW S th

TEST RIDE

AESTHETICS

OTHERS



We congratulate you on becoming a proud owner of Royal Enfield bike. We requestyou to give this feedback after completion of the delivery process.

BIKE INSTALLATION CONFIRMATION BY CUSTOMER

1 Bike Documents explained (Invoice, Insurance, RC / Road Tax Receipt)2 Owner’s Manual received

3 Recommended Lubricants explained4 Maintenance Schedule sheet in Owner’s Manual shown and explained5 Next Free Service due explained6 All Free / Paid Services explained7 Warranty Guidelines explained8 “R i i i d” d t il h i th l l i d

NO YES



Suggestions If Any:

CUSTOMERSIGNATURE

Model: Registration No.:

13 Control Switches & Disc Brake System usage explained

14 Fuse Box location shown and explained15 Recommended Tyre Pressure explained16 Bike starting & Gear shifting procedure explained17 Quantity of Fuel in Fuel Tank informed18 Bike orientation & short distance drive provided19 Date and Time of Installation20 Name of Person who did Installation

NO YES



FORM 22[See Rules 47(g), 115, 124 (2), 126A and 127 (1), 127 (2)]

INITIAL CERTIFICATE OF COMPLIANCE WITH POLLUTION STANDARDS, SAFETYSTANDARDS OF COMPONENTS AND ROAD WORTHINESS

Certified that the following vehicle complies with the provisions of the Motor Vehicles Act, 1988, and therules made there under, including the following mass emission norms:

Brand name of the vehicle :-

Chassis number :-

Engine number/motor number :-(in case of battery operated vehicles)

Sub-rule No. of rule :- 115(2)(i), 115(14)(F)

Emission norms :- Bharat Stage III[Bharat Stage-I/II/III/Bharat (Trem) Stage-III etc.]

Date :

Bullet Electra 350 UCE / Bullet Electra 350 UCE - ES

For ROYAL ENFIELD

Quality Assurance

Bullet350 Twinspark Owner Manual

Documents

Transcript of Bullet350 Twinspark Owner Manual