Bull Plug - Penn Machine · PIPE SIZE Figure No. 06192 1/8 1/43/8 1/23/4 1 -2 3 4 5 6 A 0.405 0.540...

1
PIPE SIZE Figure No. 06192 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 A 0.405 0.540 0.675 0.840 1.050 1.312 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 B 2.000 2.000 2.250 2.500 2.750 3.000 3.250 3.500 4.000 5.000 6.000 6.500 7.000 8.500 10.000 LBS 0.07 0.13 0.23 0.39 0.68 1.15 1.99 2.82 5.03 9.22 16.39 23.20 31.62 58.67 97.89 SIZE L 1/8 0.273 1/4 0.395 3/8 0.407 1/2 0.534 3/4 0.553 1 0.661 1-1/4 0.681 1-1/2 0.681 SIZE L 2 0.697 2-1/2 0.933 3 1.016 3-1/2 1.071 4 1.094 5 1.187 6 1.208 8 1.313 Bull Plug ISO 9001:2008 & PED Certified Canadian Registered in all provinces Specification: MSS-SP95 Material: Available in a complete range of Carbon Steels, Stainless Steels, Alloy Steels and Non-ferrous metals certified to ASTM, ASME, and Military standards. Sizes: 1/8”- 8” Also available as Hex Threads: American National Standard Taper Pipe Threads NPT (ANSI/ASME B1.20.1-1983) Also available in other thread forms: NPTF, NPSC, NPSM, BSPT, BSPP PENNSYLVANIA MACHINE WORKS • 1-800-PENN-USA • WWW.PENNUSA.COM All dimensions are in inches • Weights are based in Carbon Steel Active Model 3D Length of thread screwed into fitting

Transcript of Bull Plug - Penn Machine · PIPE SIZE Figure No. 06192 1/8 1/43/8 1/23/4 1 -2 3 4 5 6 A 0.405 0.540...

Page 1: Bull Plug - Penn Machine · PIPE SIZE Figure No. 06192 1/8 1/43/8 1/23/4 1 -2 3 4 5 6 A 0.405 0.540 0.675 0.840 1.050 1.312 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625

PIPE SIZE

Figure No. 06192

1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6

A 0.405 0.540 0.675 0.840 1.050 1.312 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625

B 2.000 2.000 2.250 2.500 2.750 3.000 3.250 3.500 4.000 5.000 6.000 6.500 7.000 8.500 10.000

LBS 0.07 0.13 0.23 0.39 0.68 1.15 1.99 2.82 5.03 9.22 16.39 23.20 31.62 58.67 97.89

SIZE L

1/8 0.273

1/4 0.395

3/8 0.407

1/2 0.534

3/4 0.553

1 0.661

1-1/4 0.681

1-1/2 0.681

SIZE L

2 0.697

2-1/2 0.933

3 1.016

3-1/2 1.071

4 1.094

5 1.187

6 1.208

8 1.313

Bull Plug

ISO 9001:2008 & PED Certified Canadian Registered in all provinces

Specification: MSS-SP95

Material: Available in a complete range of Carbon Steels, Stainless Steels, Alloy Steels and Non-ferrous metals certified to ASTM, ASME, and Military

standards.

Sizes: 1/8”- 8” Also available as Hex

Threads: American National Standard Taper Pipe Threads NPT (ANSI/ASME B1.20.1-1983)

Also available in other thread forms: NPTF, NPSC, NPSM, BSPT, BSPP

PENNSYLVANIA MACHINE WORKS • 1-800-PENN-USA • WWW.PENNUSA.COM

All dimensions are in inches • Weights are based in Carbon Steel

Active

Model

3D

Length of thread

screwed into fitting

http://www.pennusa.com/

MINISTÉRIO DA CIÊNCIA, TECNOLOGIA, INOVAÇÕES E …portal.inpa.gov.br/./images/COAES/Relatorio_TCG___2018... · 2020. 2. 18. · 5.563, de 11 de outubro de 2005 e tem por finalidade

MINISTÉRIO DA CIÊNCIA, TECNOLOGIA, INOVAÇÕES E …portal.inpa.gov.br/./images/COAES/Relatorio_TCG___2018... · 2020. 2. 18. · 5.563, de 11 de outubro de 2005 e tem por finalidade

OUTBOARD - Marc's Marine · WAtEr PUMP SErVICE KIt Replaces: 06192-881-C00 Fits: BF8A (USA) 18-3278 WAtEr PUMP SErVICE KIt Replaces: 06192-ZV1-C00 Fits: BF5 18-3280 18-3281 WAtEr

OUTBOARD - Marc's Marine · WAtEr PUMP SErVICE KIt Replaces: 06192-881-C00 Fits: BF8A (USA) 18-3278 WAtEr PUMP SErVICE KIt Replaces: 06192-ZV1-C00 Fits: BF5 18-3280 18-3281 WAtEr

The RMV- JobTicket€¦ · Tel.: 06192 294-0 | Fax: 06192 294-900 E-Mail: info@rmv.de | Internet: sustainable mobility The RMV-JobTicket is synonymous with . Title:

The RMV- JobTicket€¦ · Tel.: 06192 294-0 | Fax: 06192 294-900 E-Mail: [email protected] | Internet: sustainable mobility The RMV-JobTicket is synonymous with . Title:

SHEET NO. 228 · api or o.d. reduced to weight each price each weight each price each weight each price each 1/4 0.540 1/8 2 1/4 46.25 1/4 57.06 3/8 0.675 1/8 2 1/2 1/4 46.25 3/8

SHEET NO. 228 · api or o.d. reduced to weight each price each weight each price each weight each price each 1/4 0.540 1/8 2 1/4 46.25 1/4 57.06 3/8 0.675 1/8 2 1/2 1/4 46.25 3/8

Announce · BS 4449 Grade BS 4449 Grade 250 0.270 0.065 0.065 0.450 25.48 At least (1988) 250 (1988) 460 Grade 460 0270 0.055 0.055 0.540 46.89 SD 30 0.300 0.060 0.060 0.500 SD 40

Announce · BS 4449 Grade BS 4449 Grade 250 0.270 0.065 0.065 0.450 25.48 At least (1988) 250 (1988) 460 Grade 460 0270 0.055 0.055 0.540 46.89 SD 30 0.300 0.060 0.060 0.500 SD 40

DOCUIENT RESUME 06192 - B1366367]DOCUIENT RESUME 06192 - B1366367] Minimum Requirements re Needed for Colleges and Universities To Justify Research Equipment Purchases. HRD-78-52;

DOCUIENT RESUME 06192 - B1366367]DOCUIENT RESUME 06192 - B1366367] Minimum Requirements re Needed for Colleges and Universities To Justify Research Equipment Purchases. HRD-78-52;

P A 2 < 0.540 W (GeV) P FRDF F A TABLE I: Table of ... · Unpolarized cross-section model 4.5% 2.0% 2.0% 2.0% ... Q2 = 0.20 GeV2 Q2 = 0.24 GeV2 Q2 = 0.29 GeV2 ... A1A2_Slide.pptx

P A 2 < 0.540 W (GeV) P FRDF F A TABLE I: Table of ... · Unpolarized cross-section model 4.5% 2.0% 2.0% 2.0% ... Q2 = 0.20 GeV2 Q2 = 0.24 GeV2 Q2 = 0.29 GeV2 ... A1A2_Slide.pptx

2/28/2017; CLK - Agenda Packet (Public); Finance ... · 2016 Rates Earned 0.540% 0.826% 0.873% 0.993% 1.270% 1.930% *Investment policies allow maturities out to 10 year, so higher

2/28/2017; CLK - Agenda Packet (Public); Finance ... · 2016 Rates Earned 0.540% 0.826% 0.873% 0.993% 1.270% 1.930% *Investment policies allow maturities out to 10 year, so higher

June 11, 2014 - WILL · Wheat 0.574 0.590 0.565 - 0.625 0.540 From the June 2014 WASDE report: CORN: The outlook for 2014/15 U.S. feed grain supplies is virtually unchanged this month

June 11, 2014 - WILL · Wheat 0.574 0.590 0.565 - 0.625 0.540 From the June 2014 WASDE report: CORN: The outlook for 2014/15 U.S. feed grain supplies is virtually unchanged this month

Buyer’s Couplings Guide - ECN Korns.1902 4.500 11/2.1902 5.563 11/2.1902 6.625 11/2 All dimensions are approximate. *Couplings are straight tapped. Tolerance, thread length = ±1

Buyer’s Couplings Guide - ECN Korns.1902 4.500 11/2.1902 5.563 11/2.1902 6.625 11/2 All dimensions are approximate. *Couplings are straight tapped. Tolerance, thread length = ±1

BRONZE FITTINGS - Midland Industries · 5 5.563 8.0 0.12500 5.39073 0.9370 7.50 5.44929 1.4063 11.25 5.47862 0.100 6 6.625 8.0 0.12500 6.44609 0.9580 7.66 6.50597 1.5125 12.10 6.54062

BRONZE FITTINGS - Midland Industries · 5 5.563 8.0 0.12500 5.39073 0.9370 7.50 5.44929 1.4063 11.25 5.47862 0.100 6 6.625 8.0 0.12500 6.44609 0.9580 7.66 6.50597 1.5125 12.10 6.54062

DOCUMENT UNITED STATES DISTRICT COURT ...MICHAEL SIVA, and JEFFREY ROGIERS, Defendants. 1:17-cv-06192-VM CONSENT OF DEFENDANT JEFFREY ROGIERS 1. Defendant Jeffrey Rogiers ("Defendant")

DOCUMENT UNITED STATES DISTRICT COURT ...MICHAEL SIVA, and JEFFREY ROGIERS, Defendants. 1:17-cv-06192-VM CONSENT OF DEFENDANT JEFFREY ROGIERS 1. Defendant Jeffrey Rogiers ("Defendant")

UNITED STATES DISTRICT COURT DISTRICT OF MAINE2013… · (N.D. Ill), Annick Roy o/b/o Jean-Guy Veilleux v. Rail World, Inc. et al ., No. 13-cv-06192 (N.D. Ill), Alexia Dumas-Chaput

UNITED STATES DISTRICT COURT DISTRICT OF MAINE2013… · (N.D. Ill), Annick Roy o/b/o Jean-Guy Veilleux v. Rail World, Inc. et al ., No. 13-cv-06192 (N.D. Ill), Alexia Dumas-Chaput

POSITIONING - Singapore Exchange...1 Based on Unit closing price of $0.540 and $0.485 on the last trading days of 2019 and 2018 respectively. 2 Funds from operations is defined as

POSITIONING - Singapore Exchange...1 Based on Unit closing price of $0.540 and $0.485 on the last trading days of 2019 and 2018 respectively. 2 Funds from operations is defined as

Model C-ET - Instrumart · Locate the transducers on opposite sides of the pipe 180o apart, ideally at the 3 and 9 o’clock positions. ... 5 5.563 0.258 0.258 0.375 0.375 0.500 0.625

Model C-ET - Instrumart · Locate the transducers on opposite sides of the pipe 180o apart, ideally at the 3 and 9 o’clock positions. ... 5 5.563 0.258 0.258 0.375 0.375 0.500 0.625

State Fair Community College - 2012 Spring Survey...Employee Training and Recognition 4.544 0.540 3.167 1.129 1.377 1.192 Quality and Productivity Improvement Results 4.504 0.559 3.462

State Fair Community College - 2012 Spring Survey...Employee Training and Recognition 4.544 0.540 3.167 1.129 1.377 1.192 Quality and Productivity Improvement Results 4.504 0.559 3.462

DRIPNET PC PRESSURE COMPENSATING TECHNOLOGY TO …irrigation-mart.com/customer/irrmar/pdf/NETAFIM_DRIPNETPC.pdf · TUBING I.D. 0.540 0.570 0.620 0.690 0.820 0.820 MIL 45 45 45 48

DRIPNET PC PRESSURE COMPENSATING TECHNOLOGY TO …irrigation-mart.com/customer/irrmar/pdf/NETAFIM_DRIPNETPC.pdf · TUBING I.D. 0.540 0.570 0.620 0.690 0.820 0.820 MIL 45 45 45 48

Pipe - easysteel.co.nz · To prevent deterioration of surface quality between manufacturer and installation, each length of API is coated with a rust preventative lacquer. ... 0.540

Pipe - easysteel.co.nz · To prevent deterioration of surface quality between manufacturer and installation, each length of API is coated with a rust preventative lacquer. ... 0.540

arbon Steel - Cloud Object Storage | Store & Retrieve Data ... · arbon Steel Bull Plugs Carbon Steel Bull Plugs Size ... 4 8 0.540 14 2 51 ... , T and Casing threads conform to ASME

arbon Steel - Cloud Object Storage | Store & Retrieve Data ... · arbon Steel Bull Plugs Carbon Steel Bull Plugs Size ... 4 8 0.540 14 2 51 ... , T and Casing threads conform to ASME

Plenary Invited Lecture...Graziers, landagents, etc. 0.026 0.32 3 Sub-total 5.563 68.07 - Non-agricultural Clothing workers Building, furniture trade Miscellaneous workers Professional,

Plenary Invited Lecture...Graziers, landagents, etc. 0.026 0.32 3 Sub-total 5.563 68.07 - Non-agricultural Clothing workers Building, furniture trade Miscellaneous workers Professional,