Building our world - bezares.com catalog.pdf · Aisin automatics and a wide range of manual...
Transcript of Building our world - bezares.com catalog.pdf · Aisin automatics and a wide range of manual...
Building our world
Product brochure
About Bezares USA
Bezares USA is an extension of BEZARES S.A., which was founded in 1954 by Eugenio and José Bezares in Madrid, Spain, and over the years has become a major player in the European market and worldwide. Continuing through the years as a family owned company, Bezares takes very seriously the reputation for quality, customer service, product development, and delivery that it has developed in Europe. We, at Bezares USA, are committed to developing and continuing this same reputation in North America.
4
bezares.com/usa
4200/4250 SeriesDual output eight bolt heavy duty PTO. Two independently air operated outputs with a variety of ratio and output combinations. Very versatile for many applications
where 2 PTO’s would be required. wher
Super heavy duty with a variety of output and ratio options to cover almost any application. Compared to similar models,
our unit has weight and cost advantages. The perfect PTO for maximum torque
and horsepower applications.
Suaa
a
8500 Series
Medium-duty 6 bolt (6000), 8 bolt (6800) and heavy duty 8 bolt (8000) forward and reversible PTOs. Factory air shift only, and 1.25” round keyed shaft output. A wide variety of input gears are available.
6000/6800/8000 Series)
d
1000/2000 SeriesCompatible with the most common transmissions in the market. wide range
of input gear, ratio, output, and shifter options, all cast iron,include large 12mm flange bolts, supporting some of the larger
pumps in the market. Also available in a deep mount 1010 and 2010 series.
Cotra
pde
4100 SeriesHeavy duty PTO with a 475 ft./lb. torque rating. Compact and lightweight, covering high torque demands. Fill 90% of all applications needs where the competition needs a much larger and more expensive PTOs.
orque eight, Fill re er
Mechanical PTOs
PTO SeriesIntermittent Service Continuous Service
Weight (Lb)Max. Torque
(Lb. FT)Max. Power (HP @ 1000rpm)
Max. Torque (Lb. FT)
Max. Power (HP @ 1000rpm)
1000 250 49 178 35 32
2000 250 49 178 35 34
4100 420 90 340 65 37
4200 4250
420 80 300 57 75
PTO SeriesIntermittent Service Continuous Service
Weight (Lb)Max. Torque
(Lb. FT)Max. Power (HP @ 1000rpm)
Max. Torque (Lb. FT)
Max. Power (HP @ 1000rpm)
6000 210 30 150 30 37
6800 210 30 150 30 40
8000 500 500 400 76 60
8500 500 95 400 76 70
5
bezares.com/usa
Hotshift PTOs (Allison)
New medium duty low profile PTO engineered to assist with the space constraints that are faced in today’s industry. Lower profile than other previous models, as well as an internal lubrication design, which eliminates one hose from installation lessening the install time required, and in turn saving unnecessary cost. Wide range of output and gear ratios options for almost all application needs.
3252
3000 SeriesDesigned for the Allison AT/MT/HT
model transmissions. Low profile housing for easier mounting and is available with various outputs, ratios as well as either electric over
hydraulic or air shift options.
Desigmod
h
rhy
3131RP
The 3190 output adapter for the rear pump option gives you the versatility of being able to convert or change your output from a SAE B, SAE BB, SAE C, or even DIN 5462 in a very short time. This will also lessen your need to stock dozens of PTO models.
3190
Same characteristics as 3131, built for Rear pumps
3131The new 3131 series PTO is the newest heavy duty PTO designed and developed by Bezares for the most grueling applications in the market today. This PTO has maximum torque ratings of 500 ft. /lbs. and 97 HP @ 1000 RPM. We have also incorporated the single pressure hose, with internal lubrication to decrease install time. Wide range of gear ratios and output options including the RP (Rear Pump) option seen below.
PTO SeriesIntermittent Service Continuous Service
Weight (Lb)Max. Torque
(Lb. FT)Max. Power
(HP @ 1000rpm)Max. Torque
(Lb. FT)Max. Power
(HP @ 1000rpm)
3000 310 59 310 44 55
3131 500 97 400 78 40
3151 500 97 400 78 32
3252 410 78 310 59 30
3151 SeriesConstant mesh 10 Bolt PTO models for Allison and Caterpillar series transmissions. These PTO’s have a wide range of ratios, outputs.
6
bezares.com/usa
3200 / 3800 SeriesEATON Fuller and more...Our 3800 series was developed based off the 3200 series model, which has been proven in the market for over a decade. We have developed this 8 bolt PTO to meet the demands of the market for a hot shift PTO option for the 8 bolt aperture. This PTO will be air shift, and will offer the same range of ratios, and outputs as the 3200 series.
3900/3920 Series FORD
Our 3900 and 3920 series PTO’s have been designed for the Ford F- Series Torqueshift
transmissions. Both PTO’s have both a direct as well as a remote mount output option.
O
3300 Series Allison / Aisin
This versatile 6 bolt hotshift PTO is designed for the 1000/2000 Allison transmission family, Aisin automatics and a wide range of manual
transmissions. The 3200 and 3300 series are offered with multiple ratios and outputs, as well as electric over hydraulic.
TfA
Hotshift PTOs
PTO SeriesIntermittent Service Continuous Service
Weight (Lb)Max. Torque
(Lb. FT)Max. Power
(HP @ 1000rpm)Max. Torque
(Lb. FT)Max. Power
(HP @ 1000rpm)
320033003800
250 49 178 35
30
3920 200 27 140 27
3900 120 16 86 16
7
bezares.com/usa
11106K0311107KXXX11109K53
1198K03 1196K03 11111K03 / 11113K03
Volvo “I Shift” PTOs Mack “M drive” PTOs
PTO SeriesIntermittent Service Continuous Service
Weight (Lb)Max. Torque
(Lb. FT)Max. Power
(HP @ 1000rpm)Max. Torque
(Lb. FT)Max. Power
(HP @ 1000rpm)
1198K03 309 60 221 42 32
1196K03 609 118 435 84 17
11111K03 361 70 258 50 26.4
11113K03 464 90 331 64 26.4
11109K53 361/310 70/60 258/221 50/43 72
11107KXXX 413/442 80/85 332/369 64/71 88
11106K03 413 80 295 57 40
7022904 405 78 331 64 27.5
7022904
8
bezares.com/usa
European Style PTOsWorldwide PTO offering
AdaptersConvert easily from DIN output to any SAE outputs needed.
Geared Adapters
You can clear mounting obstacles or switch PTO output rotation with Bezares’ six bolt geared adapters. Offered in a 45 degree angle or straight option, these can be used with any spur cut input gear that Bezares has available. A 22 degree offset adapter is available as well, which has more flexibility for some helical cut gears.
HINO NISSAN ISUZU TOYOTA
MERCEDES MITSUBISHI SCANIA ZF
9
bezares.com/usa
Piston Pumps and Motors
MR bent axis piston pump
FRV variable displacement pump
Fixed displacement. Designed for use in medium/high pressure applications. Its small body allows installation in reduced spaces. Available in ISO 4.
Ideal for truck cranes with load-sensing systems, it provides the required flow at the right time. It incorporates a manual flow control, reducing the number of control valves necessary. Available in ISO 4.
FR bent axis piston pumpFixed displacement pumps and motors. The compact design enables installation in almost all applications. Available in ISO 4 and SAE B / BB versions.
Motors with the same flow rates also available.
GPM@ 1000 RPM
Displacement (cu In/rev)
Maximum pressure P3 (PSI)
Maximum speed (cu In/rev)
5 1.16
5800
2800
8 1.85 2600
11* 2.44 2600
13 3.05 2300
16* 3.65 2300
21* 4.88 2000
29* 6.71 1900
GPM@ 1000 RPM
Displacement (cu In/rev)
Maximum pressure P3 (PSI)
Maximum speed (Rev/min)
11 2.4 5076 2400
12 2.7 4350 1600
16 3.65 5076 2200
21 4.8 4350 1900
29 6.68 5076 1800
33 7.54 4350 1700
GPM@ 1000 RPM
Displacement (cu In/rev)
Maximum pressure P3 (PSI)
Maximum speed (Rev/min)
22 5.12 5076 2500
* Standard models
10
bezares.com/usa
Bushing Pumps
BEPRL Series
BEM Series
BE XL Series
GPF SeriesGear pump, birotational capability, with internal drainage. Aluminum body is lighter than cast pumps and permits operation at higher pressures with a low level of noise. SAE “A” 2 bolt flange. 5/8 9 tooth.
Birotational, with a cast iron housings, giving it great resistance to high pressures and rpm’s. Available with ISO 4-bolt and SAE 2/4-bolt flanges. Available in ISO 4 and UNI 3 versions.
A birotational model with a cast iron body. Rear and side ports, providing greater versatility and simplifying installation. Available with ISO 4-bolt and SAE 2/4-bolt flanges. UNI 3.
A larger model, in cast iron with the highest working pressure performance. Available with ISO 4-bolt and SAE 2/4-bolt flanges.
GPM@ 1000
RPM
Displacement (cu In/rev)
Maximum pressure P3
(PSI)
Maximum speed
(Rev/min))6 1.4 4400
20008 1.77 4200
11 2.5 3800
12 2.8 3600
GPM@ 1000
RPM
Displacement (cu In/rev)
Maximum pressure P3
(PSI)
Maximum speed
(Rev/min))13 3.05 4600
275016 3.66 4500
19 4.27 4200
22 4.88 3900
250026 6.1 3400
30 7.02 3300
GPM@ 1000
RPM
Displacement (cu In/rev)
Maximum pressure P3
(PSI)
Maximum speed
(Rev/min)23 5.4 4200
250027 6.3 4200
31 7.2 4200
35 8.1 3900
39 9 3600 2000
11
bezares.com/usa
Dump / Walking FloorThe Dump/walking floor pump offers an all in one pump for end dump and live floor combo applications with a built in dual pressure relief valve set at 2500/3200 PSI as well as factory air shift. Available with SAE B 4 bolt or twin shafted remote mount.
pump a built well as
afted
P5151 SeriesThese pumps are designed to be bi-rotational to fit a wide variety of applications, allowing for lower inventory cost while still offering a variety of porting and mounting options. These pumps offer flows ranging from 9-50 GPM and pressure ratings up to 3000 PSI.
g e ng and
P 2100 SeriesThese pumps are a dowelled, cast iron, roller bearing design for the roughest
applications, while offering a light- weight and compact pump. These pumps
are offered in four mounting configurations and flows ranging from 3-39 GPM and pressure ratings up to 3000 PSI with JIC and NPT porting.
weare offe
Full range of high quality dump pumps in stock at all times for same day shipping in most cases. Range includes from the smaller series to our full size series. Manual or air shifted. Direct mount SAE B 4-Bolt, DIN (special order), or twin shaft remote mount available on all models. New DIN 5462 option available on full size series model only.
Bearing Gear Pumps and Motors
bezares.com/usa
Denison Design
Single Vane Pump (Very High pressure) T7B, T7DSW 0.37 - 9.70 3600 4641
Single Vane Pump T6C, T6D, T6E, 0.67 - 16.48 2800 3988
Double Vane Pump (Very High pressure) T7BB, T67CB, T67DB, T67EB 0.55 - 16.48 2800 4641
Double Vane Pump T6CC, T6DC, T6EC, T6ED 0.67 - 16.48 2800 3988
Triple Vane Pump (Very High pressure) T67DBB, T67EDB 0.55 - 16.48 2800 4641
Triple Vane Pump T6DCC, T6EDC 0.67 - 16.48 2800 3988
Vickers Design
Single Vane Pump V10, V20 0.06 - 0.79 4800 2538
Single Vane Pump 20V, 25V, 35V, 45V 0.12 - 4.39 2500 3045
Double Vane Pump 2520V, 3520V, 3525V 0.12 - 2.75 2500 3045
Double Vane Pump 4520V, 4525V, 4535V 0.12 - 4.39 2500 3045
Thru Drive Vane Pump 25VT, 35VT, 45VT 0.49 - 4.39 2500 3045
Single Vane Pump V10F, V20F, VTM42 0.06 - 0.79 4800 2538
Type SeriesDisp.
(cu In/rev)
Max.RPM
Max.Press. (PSI)
Denison DesignA full range of TDZ models based on Denison designs. Both complete units and all spare parts are 100% interchangeable with models manufactured by Denison.
Spare parts A full range of TDZ spare parts for Bezares/TDZ, Denison and Vickers vane pumps and motors.
Vickers DesignA full range of TDZ models based on Vickers designs. Both complete units and all spare parts are 100% interchangeable with models manufactured by Vickers.
Vane Pumps and Motors
nison spare odels
A depam
13
bezares.com/usa
Control and Tipper Valves
• Mono-block & sectional directional control - open
center
• Nominal Flows from 12-63 GPM
• Operating pressures up to 315 Bar (4600 PSI)
• Multiple shift options-pneumatic-cable-electric/
hydraulic-joystick-solenoid
• Spool options including- cylinder - motor -float
• Work port options-anti shock-ant-cavitation
• Inlet and rear cover options including-pilot
operated adjustable relief-power beyond
• All ports are “SAE” O’ring boss
• Large inventory readily available
MB4 Mono-block Directional Control Valves-SA/DA-16 GPM
MB5 Mono-block Directional Control Valves-SA/DA-21 GPM
SN4-Sectional Directional Control Valves-SA/DA 21 GPM
SN6-Sectional Directional Control Valves-SA/DA-37 GPM
9030890 9058090 901211The 9030890 valve is an air operated dual pressure tipping valve with two independent operating pressures. This valve is a perfect fit for a walking floor and dump combination, at a fraction of the cost of other options.
Air operated single pressure tipper valve. Perfect fit for applications where a dump pump is not applicable due to clearance issues with certain transmissions. As well as on most rear mount PTO applications where supporting the pump requires extensive fabrication and increased labor costs.
The 901211 is a two p o s i t i o n s , two selector valve that offers a simple means of directing oil flow into two separate hydraulic circuits. It is air operated with an open center in neutral position.
90
90n d re
14
bezares.com/usa
Metering PTO/Dump combo valve
PTO/Dump
combo with tailgate latch valve & 13”
console
Pneumatic controls
Mounting towers and brackets
for 2 And 3 ways Pneumatic control for Control valve w/o PTO switch and Metering PTO/Dump combo valve
Bezares offers a variety of in-cab controls for Power Take-Offs. Three different size tower consoles for combo control valves are also available. Controls include standard on/off AK101X air kit, AK126X with kick out option, AK127X without kick out, and AK128X with a feathering option.
Specialty control AK145X is offered for the forward and reversible air shift Power Take-Offs.
LV series mechanical lever controls, which are a high quality lever shift option in three different lengths, are offered for applications where air shift is not an option.
Control valve W/O PTO switch
lve
ch
Cab Controls
2/3 ways Pneumatic control
15
bezares.com/usa
Oil Tanks
Pneumatic CompressorsThe Bezares mini air compressor is a 12 Volt, easy to install, completely self-contained, and very low maintenance model. Compact design allows for easy installation on most trucks, even inside the driver compartment. Excellent solution for small vehicles with no factory air option.
We offer a full line of tanks to fit all application needs. Our tanks are available in aluminum, steel, and poly ranging in capacities from 7 to 100 gallons. Styles include upright mount, saddle mount, and square side mount, with special order options of sight gauge and two inch ports as well as stainless steel strap options. Also custom tanks are available per request.
Upright Saddle
Non Stock Items: Available upon request ->
Bezares USA • +1 888 663 1786 • [email protected] • pto-usa.com
World leader in hydraulic equipment manufacturing
Hydraulic Equipment
17
bezares.com/usa
Hydraulic Cylinders
Cylinders
• Seamless steel tubes with high tensile strength
• Optimal clearance between stages to guarantee greater stability
• Special finishing process on the tubes to insure seal life
• HARD CHROMED ON ALL STAGES
• Large payload
• Low weight
• Low maintenance requirements
• Hydraulically tested prior to shipping.
CYLINDER DIAMETER
TOTAL NUMBER OF STAGES TOTAL STROKE
PI Pin to PinTR Trunnion
Pin to pinBZ5-3-72 PIBZ6-3-120 PI
BZ6-3-126 PIBZ7-4-135 PI
BZ7-4-156 PIBZ8-5-190 PI
BZ8-5-220 PIBZ8-5-250 PI
BZ8-5-265 PI
TrunnionBZ4.5-3-090 TR BZ5.5-3-130 TR
BZ5.5-3-140 TR BZ6.5-4-150 TR
BZ6.5-4-160 TRBZ6.5-4-170 TR
BZ6.5-4-180 TRBZ7.5-4-185 TR
7 PIBZ 1354- - -
18
bezares.com/usa
Multipliers & Gearboxes
4x4 gearboxSpecial gearbox to convert 4x2 vehicles to 4x4, 2 speeds (40% and 47%), torque up to 1475 Lb/Ft and with the ability to connect a PTO.
Splitter gearbox
Multipliers
Agricultural gearboxes
Vertical, high power. Bottom input, top output. Available with different internal ratios.
Transfer gearboxes with openings for
mounting 2 PTO’s, which allows great
flexibility when choosing the best position
for the auxiliary shafts. A wide range of
internal ratios to fit most applications.
Special for tractors with different output types (SAE B, SAE BB, ISO).Made of high strength tempered aluminium, giving high torque and power.
Available with dual output.
Multiplier gearboxes types
Coaxial
Non coaxial
Vertical
19
bezares.com/usa
Compact recovery winchCompact and lightweight winch for up to 7716 Lbs. Its simplified design is the result of Bezares experience in the design and development of winch technology, with special attention to improving the efficiency, compact design, reduced weight and number of internal parts without sacrificing performance, resulting in the optimum technical features in a compact unit.
Heavy load winchesHydraulic winch for line pulls of up to 44,000Lbs with 2-speed pneumatic shift, planetary reduction gearing, automatic multi-disc oil bath brake (applied when the winch is not operating) brake valve and guide rollers.
Heavy-duty winchHydraulic Winch with two-stage planetary geartrain.Birotational, with an overcentre valve and a mechanical emergency brake capacity of 100%. Made of tempered aluminium, with a compact design giving a lower overall weight compared to other models with the same pulling capacity.
SeriesMax line pull 1st
layer (Lbs)
Maximum Pressure
(PSI)
Maximum Speed
(Ft/min)
Bull 7000 2175 82
Bull / BZC 9000 2175 69
BZC 14000 2610 52
Heavy Duty
20000 2610 59
30000 2610 39
40000 2610 72
Shorter drum:
Fits on 4x4 recovery vehicles
7,00
0
Compact & lightweight
7,000 / 9,000 Lbs
10,0
00
11,000 / 14,000 Lbs
Two stage planetary gears
15,0
00
20,000 / 30,000 Lbs
Heavy load
Braking valve
Automatic multi-disc brake30
,000
99140,000 / 66,000 Lbs
Heavy load
High capacity drum
2 speeds pneumatic shift
Automatic multi-disc brake (in rest position)
66,0
00
Winches
20
bezares.com/usa
Power-Packs
Pumps - Mini power-packs
Q (cu In/rev) 0.05 0.08 0.10 0.13 0.16 0.20 0.26 0.35 0.49
L (inches) 2.89 2.93 3.01 3.05 3.13 3.25 3.44 3.68 4.00
Maximum operating pressure (PSI) 2901 3046 2901 3046 3046 2901 2611 2031 1450
Maximum Intermittent Pressure (PSI) 3626 3626 3626 3626 3626 3626 3336 3046 2031
Max. rpm. 4000 4000 4000 4000 4000 4000 2500 2500 2500
Weight (Lbs) 2.43 2.43 2.43 2.43 2.65 2.65 2.87 3.31 3.53
Part Number 9086914 9096114 9087614 9075014 9039014 9075114 9087514 9094714 9087714
Micro power-packsCompact systems used in applications such as loading ramps or lifts for vehicles for the disabled.
Hydraulic Electro pump integrated in a coffer*, containing a powerful electro-hydraulic power pack and a single acting valve bank.
Inline power-packs
Capacity (GAL)
Weight (Lbs)
Material
0.40 0.55 HDPE
1.06 1.10 HDPE
1.32 6.61 Steel
1.59 1.98 HDPE
1.98 8.82 Steel
2.11 2.20 HDPE
2.64 2.43 HDPE
2.64 11.68 Steel
3.17 2.76 HDPE
3.96 17.86 Steel
3.96 13.89 Steel
4.23 3.31 HDPE
5.28 15.87 Steel
Motors - Mini Power-pack
DC 12V 1,5 / 2,0 kW
DC 24V. 2.0 kW (ventilado)
AC 230/400 Volts 0,25 - 5,5Kw
Mini power-packsMade of high-pressure-injected cast aluminium. Single and double action applications and versions for special applications which, combined with the use of cartridge valves (SAE 08 - 3/4 “-16 UNF), allows multiple circuits to be used. Compatible with the components from previous versions of BZ mini power-packs.
Oil T
an
ks
- M
ini
po
wer-
pack
s
World leader in hydraulic equipment manufacturing
Hydraulic Equipment
998400/14/02/18
Bezares HeadquartersAv. de las Retamas, 145 45950 Toledo, Spain • +34 91 818 82 97
Bezares Mexico4ª avenida nº 980 colonia. Zimix Santa catarina, n.l. Mexico, 66358 Monterrey +52 81 1287 0090 • [email protected]
Bezares BarcelonaCalle Mollet, 28 08120 La Llagosta, Barcelona, Spain • +34 935 743 [email protected]
Bezares ChinaNo. 8. Hongfu East Road, Yaozhuang Town Zhejiang Province • China +86 573 84777638 • [email protected]
Bezares Italy11, via dell’ artigianato 31034 Cavaso del tomba, Italy • +390 423 544 105 [email protected]
Bezares France106, Avenue des roses, Zac de la butte gayen 94440 Santeny • France +33 014 510 1540 • [email protected]
Bezares USA - Ohio217 Commercial Ave SENew Philadelphia, OH • 44663(330) 339-6701
Bezares USA - Texas27634 Commerce Oaks Drive
Oak Ridge north, Texas • 77385 [email protected] • +1 888 663 1786
bezares.com/usa