10 Ft.

Metal & WireProducts For TheBuilding Industry

Length X Sizes Y Sizes

Six Manufacturing & DistributionCenters To Serve You!

• North Las Vegas, NV • Burbank, CA• Livermore, CA • Orange, CA • Phoenix, AZ • Salt Lake City, UT

Toll Free: 1-87-STOCKTON (877-862-5866) Fax: 702-651-13034675 Vandenberg Drive, N. North Las Vegas, NV 89081

www.StocktonProducts.com

Typical Section, No Scale

BUGSTOP™ Soffit Vent

1/2"

3/4"

7/8"

2"

3"

4"

x

y

Specify as: Bug Stop™

Product Code: SBS

Material:Metal: Galvanized SteelWire Screen: Aluminum, .062, 1/16"ASTM: A653 LFQ, C1063, B209, B691/8" Vent Holes, 1/4" Vent Holes

“Allows air in; keeps bugs out.” All the same featuresand value of our standard SVR screed, but with theaddition of 1/16" aluminum screen that protects againstthe entry of wasps, bees, termites and other pests.

PLASTER/STUCCO

SHEATHING .062 ALUMINUMSCREEN (1/16”)

The penney conveys the size of the mesh.

NEW

©2011 Stockton Products. All rights reserved worldwide.

Patent Pending

10 Ft.

Metal & WireProducts For The

Building Industry

Length X Sizes Y Sizes

Six Manufacturing & DistributionCenters To Serve You!

• North Las Vegas, NV • Burbank, CA• Livermore, CA • Orange, CA • Phoenix, AZ • Salt Lake City, UT

Typical Section, No Scale

1/2"

3/4"

7/8"

2"

3"

4"

x

y

Specify as: Ember Stop™

Product Code: SES

Material:Metal: Galvanized SteelWire Screen: Aluminum, .062, 16-16 (1/16")ASTM: A653 LFQ, C1063, B209, B691/8" Vent Holes

Allows air in while also designed for protectionagainst ember entry. All the same features andvalue of our standard SVR screed, but with theaddition of a 1/16" aluminum screen. Complies with section 706A, CBSC Wildfire Protection Provisions.

PLASTER/STUCCO

SHEATHING .062 ALUMINUMSCREEN (1/16”)

The penney conveys the size of the mesh.

Complies with seCtion 706A, CBsC wildfire proteCtion provisions.

Toll Free: 1-87-STOCKTON (877-862-5866) Fax: 702-651-13034675 Vandenberg Drive, N. North Las Vegas, NV 89081

www.StocktonProducts.com

EMBERSTOP™ Soffit Vent

NEWPatent Pending

“We've Got You Cornered”The Originator of The Welded Wire Corner.

®

For Over 60 years,Stockton Products™

has offered high qualitywelded wire CornerAid®

for all types of corner reinforcement

applications, for stuccoand drywall.

Insist on the orignal, insist on the best!

©2011 Stockton Products. All rights reserved worldwide.

CornerAid®

Standard square CornerAid.Available in single or doubleline wires. Available instainless steel.

BullnoseStandard 7/16" roundcornerAid. Available in 7/8"radius. Available in single anddouble line wires. Available instainless steel.

Plastic Nose CornerAid®

Plastic nose provides depthscreed to assure properembedment of the wire. Can be used for fire proofingapplications. Available instainless steel.

Short FlangeSquare corner with one leg at 1 1/2" when A short leg is required.

WeepAid®

Used for foundation/plateapplications as a weep screed.Also used to create "pop outs"and "ginger bread" details.Available with plastic nose.Available in stainless steel.

CornerAid

Arch Reverse Arch Outside Curve Inside Curve

Point Of Measurement Point Of Measurement Point Of Measurement Point Of Measurement

R

Direction Of Curve

R

Direction Of CurveR

Direction Of Curve

R

Direction Of Curve

Condition � Concave Condition � Convex Condition � Hardway Condition � Hardway

R

R

R

R

R

--

-

--

-

..........................

RADIUS � TYPE 1 RADIUS � TYPE 2 RADIUS � TYPE 3 RADIUS � TYPE 4

R

Extruded Aluminum ProductsFor Stucco & Drywall

Stockton Products™ is one of the nation’s leading manufacturers of standard andcustom extruded aluminum products for stucco and drywall. We have built areputation for quality products and excellent customer service.

Following is information on standard products, radius shapes, finishes & venting.

Radius Shapes – Most of our aluminum products can be ordered curved, with one of four typesof radius shapes. For tight radius requirements, certain shapes have minimum curving abilitybased on the radius dimension and direction needed. Please consult us prior to ordering.Due to the curving process, only 9’ of usable feet is available from a 10’ length. Please indicate theamount of material required in usable feet. All material will be rounded up to a 10’ length. (As anexample, 54 LF usable will be rounded up to 60 LF). Please specify the point of radius (face ofplaster, face of framing, center of reveal, etc.) Also indicate the direction of the curve from thediagrams on this page.

PLEASE NOTE that the radius is pulled towards the arrow that appears on each diagram of the types of curvesavailable. (For an order form, contact us or visit www.StocktonProducts.com)

www.StocktonProducts.com©2011 Stockton Products. All rights reserved worldwide.

Intersections – Factory fabricated mitered corners and intersections are available including insidecorners, outside corners, T, L and + shapes. Intersections are available in standard styles, whichare shown on this page. Custom shapes and designs are also available. The intersections are heli-arc welded. Six inch legs are standard. Longer legs – up to two feet in length – are available.Different size reveal widths and shapes can be intersected. Moldings can be miter cut and/ornotched to meet special field conditions. Consult your Stockton sales representative for details.These products intersect with our standard and curved radius products.

Venting – Many shapes are available vented to allow for air flow. All vent slots are 1/8" wide by 1" long, spaced 1-1/2" on center lengthwise. Multiple rows of ventsare spaced laterally, 1/2" on center. Each lengthwise row of vent slots provides approximately onesquare inch of venting per lineal foot.Note: the “V” designation in model numbers indicates vented ability.A Stockton representative is available at 1-877-862-5866 to assist you with answering questions,designing custom products and preparing your order for your dealer. Additional information andthe Radius Order Form is available in our catalog and at www.StocktonProducts.com.

“+”

“Inside Corner”“Outside Corner”

“T” “L”

Reveal Vent Vent area per Percent of area width slots lineal foot (approx.) vented (approx.)

1/2" 1 1" square 15.0%

3/4" 1 " 12.5%

1" 1 " 9.4%

1-1/2" 2 2" square 12.5%

2" 3 3" square 14.1%

3" 5 5" square 14.3%

4" 5 " 10.4%

6" 10 10" square 20.8%

Finishes – Our standard finish is Clear Anodized. Additional finishes include Fluropolymer Paint,Color Anodized (Gold; Light, Medium & Dark Bronze; Black) and Alodine/Chem-Film.Clear AnodizedThe standard finish for Stockton Plaster Moldings is Clear Anodized, Architectural 200R1. This isan electrochemical conversion process that deposits an oxide film on the aluminum extrusion. Thecoating is extremely durable and resistant to most forms of corrosion and the satin finish gives themolding an aesthetically pleasing appearance.

SpecificationsStandard Finish: Architectural 200R1, medium etch (AA-M32C10A21)Optional Finish: Class II 204R1, medium etch (AA-M32C10A31)

Fluropolymer Paint (Kynar/Hylar)®

Kynar/Hylar is a 70% fluoropolymer resin based 2-coat baked on paint that is offered as anoptional finish where high durability is required and/or the moldings must match existing colors. This premium finish is recommended for exterior applications where harsh conditions exist. It isextremely resistant to ultraviolet color degradation and chalking and is available in a wide varietyof colors.

Note: Certain colors, given the exotic nature of the color, require a Kynar XL (with topcoat).Please advise the factory of the required color prior to job costing as these colors requireadditional cost and minimum order quantities. SpecificationsTypical Finish meets or exceeds AAMA 605.2 Specification “Voluntary Specification for HighPerformance Organic on Architectural Extrusion Panels.” Meets or exceeds a nominal dry filmthickness of 1.2 mil.

Kynar® is a Registered Trademark of Atochem North America, Inc.Color AnodizedThe following color anodized finishes are available as special order items: Gold; Light, Medium &Dark Bronze; Black.Color anodized finishes can vary from piece to piece. This is a characteristic of the anodizingprocess and should be taken into account prior to placing an order. Typically, the color of theextrusions will fall within a certain range, and this range can be established before anodizing.Check with factory for details.

SpecificationsColor Anodized Finish: Integral colors to conform with designation 3AA-M112C22A32 of theAluminum Association.

Alodine/Chem-FilmAlodine/Chem-film is a chemical conversion process that protects the aluminum extrusion until aprimer coat can be applied in the field. Chemical conversion should be specified for allextrusions to be field painted.

SpecificationsChemical Conversion Finish: To conform with ASTM D 1730 Type B and MIL-C-5541A.

www.StocktonProducts.com

Headquarters: 4675 Vandenberg Drive, North Las Vegas, NV 890811-87-STOCKTON (1-877-862-5866) • (702) 651-1721 • Fax (702) 651-1303

Six Manufacturing & Distribution Centers To Serve You!N. Las Vegas, NV • Burbank, CA • Livermore, CA • Orange, CA • Phoenix, AZ • Salt Lake City, UT

Stockton Products™ is also your headquarters for Welded Wire, Metal Trim and Pozalite®.

F PlasterMolding

FPM

PCS 75 - 2-PieceControl Screed

PCS-75-2

PCS 75Short V

PCS -75

PCS75-25/25PCS 75-25/25

PlasterChannel Screed

PCS

X PlasterMolding

XPM

Plaster CornerMolding

PCM

T RevealMolding

TRM

J PlasterMolding

JPM

DripScreed

DS

Drywall ChannelScreed

DCS

F DrywallMolding

FDM

X DrywallCorner Molding

XDM

Plaster SoffitReveal Molding

WPM

Fascia CornerMolding

FCM

F WallReveal

DRMF

Z WallReveal

DRMZ

WallReveal

DRM

T DrywallMolding

TDM

J DrywallMolding

JDM

Vented SoffitMolding-16V80

VSMV

Plaster ChannelScreed-Wide V

PCS-75 Wide V

High StrengthCorner Trim

DMCT

EdgeTrimDRML

W CornerRevealDRMW

Plaster ChannelScreed 50-25/25

PCS 50-25/25

SoffitVent

SV

F DripMolding

DPMF

"W"Reveal

DRWT

PCSDirect Applied

PCS-DA

NarrowV Screed

NVS

Facia/RecessedWindow Molding

FRWM

Fascia/RecessedWindow Drip Molding

FRWDM

Z RevealBaseDRMB

Drywall ChannelScreed 50-2 Piece

DCS 50-2

Aluminum Products ProfilesProducts that can be ordered vented are designated with a �V�.

A

Depth3/4” or 1”

A - 1/4”

Depth3/4”

1/4”

A-3/4”

Depth3/4”

2 7/8”

A

Depth3/4”

A

Depth3/4”

A

Depth7/8”

Depth7/8”

Depth1 1/8”

A

Depth3/4”

Depth3/4”

3/16”

Depth3/4”

7/8”

or 1 5/8”

2 3/16” Depth3/4”

7/8” A

1”

Depth3/4”

Depth1/2”

ADepth

1/2” or 5/8”

A

Depth3/4” or 5/8”

Depth1/2” or 5/8”

1 1/8”

A

Depth1/2” or 5/8”

A 7/8”

Depth

A 7/8”

Depth

A7/8”

Depth

7/8”

Depth1/2”

A

7/8”3/8”

7/8”

3/8”Depth7/8”

2”

Depth3/4”

1 1/2”Depth3/4”

3 5/8”

90°

ADepth3/8”

Depth3/4”3/4”

7/8”

A3/4”

Depth3/4” A - 1/4”

Depth1/2”

1/4”

A - 2” & 3”

3/4”

3/4”

ADepth1/2”

ADepth5/8”

7/8”

A1/8”

Depth

3” Depth7/8”

A 4”

3” Depth7/8”

A 4”

Two profileoptions

V

V V

V V V

V V V

V

V V V

V

©2011 Stockton Products. All rights reserved worldwide.

Metal TrimRoll And Brake Formed Metal Plaster Stops,

Expansion Joints And Control JointsGalvanized • Copper • ZincStainless Steel • Aluminum

Welded WireCornerAid® And Other Welded Wire

Products For Stucco, Drywall & FireproofingGalvanized • Stainless Steel

Plastic Nose • Specialty Products

Decorative accessories for plaster, drywall, moistureprotection, ventilation and other applications.Radius curves, corners and custom fabrication.

The originator of welded wire Corner Aid®,Stockton continues to provide the lath & plaster

professional with quality wire products for a varietyof applications.

Enhances strength. Reducesshrinking and cracking. Saves

time. Ends problems withpumping to extreme heights and

distances. Now available in a 4 pound single charge package!

Complete line of extruded aluminum trims forstucco and drywall. Custom shapes, curving and

special fabrication available.

Pozalite®

Pump, Hose & Gun Lubricant. Gives More“Open Time”, Stops Jerking & Packing Hoses

Extends Pump Life • Retains MoistureMakes Troweling & Cleanup Easier

Extruded Aluminum Standard & Custom Reveal Moldings

For Stucco & DrywallClear Anodized • Alodine/Chem-Film

Kynar Paint • Color Anodized

Call 1-87-StocktonFor More Information!

An Introduction To Pozalite®

The Pozalite® formula is a plasticizing mixture that makes stucco, shotcrete and concrete better.It is a finely separated, particulate size controlled mixture that contains specially selected low-water-absorption proprietary ingredients.This makes for a product unlike any other. Available in 4 pound (Single Charge) containers and 50 pound bags.

What Are The Benefits of Pozalite®?When Mixing, Pouring And Finishing...

When Pumping...

Finished Product...

Who Can Benefit From The Use of Pozalite®?

Pozalite® Characteristics And PerformanceThe following confirms the benefits of using Pozalite®, by describing how it works:Portland cement gains strength by chemically reacting with ordinary water. This strength development requires moisture to be presentover a period of several days to "culture" the growth of interlocking crystals that give cementitious products their strength. Plaster andconcrete are typically a highly porous material that easily allows mixing-water to evaporate. This is why building codes requires moistcuring. Two functions are served with moist curing. First, time is required for reasonable strength development and secondly,maintaining moisture longer reduces shrinkage and cracking when the mix is in its most fragile stage.Pozalite® is formulated with scientifically selected proprietary ingredients. Pozalite's unique in that it can retain water between chargedplatelets of aluminum silicate.Pozalite® has modest expansion and high moisture retention properties. Even though expansion is modest, special proprietaryingredients compensate for the expansion by forming small discrete air bubbles (air entrainment) that reduces the overall waterrequirement of a mix. The air bubble, due to its size, is very stable reducing moisture loss... thereby reducing shrinkage.In summary, Pozalite® has been shown to improve the overall strength by minimizing moisture loss and reducing the waterrequirement for machine or hand applications.

• Holds moisture longer leading to more "open time"• Reduces water requirements• Reduces shrinkage & cracking• Virtually eliminates "mud slides"• Creates greater air entrainment• Smoother, easier troweling

• Leads to better workmanship• Faster, easier start-up & clean-up• Improves form release properties• Lowers number of man hours required• No lime - eliminates lime bum concern• No calcium chloride

• Excellent pumping agent with high lubricity• Ends problems when pumping material to heights and

distances• Ends jerking & packing hose

• Primes the pump for faster, easier start-up• Aids end-of-the-day clean-up• Extends equipment life• Reduces operating and maintenance costs

• Greater shear strength• Increases flexural strength• Greater compressive strength

• Resulting product is harder than without Pozalite®

• Better end-product performance in freeze / thaw conditions

• Contractors who work with cementitious products - stucco,shotcrete, pumpers, floors & other flatwork, foundations,retaining walls, counter tops, decorative concrete, etc.

• Concrete & mortar companies• Producers of functional and artistic precast and prestressed

concrete products• Concrete shingle manufacturers

• Fireproofing product manufacturers• Cementitious pump manufacturers• Cementitious related equipment manufacturers• Equipment rental firms• Consultants, engineers & architects who care about

quality results

Plastic Cement With Pozalite® ExceedsASTM G595 Compressive Strengths Minimums By:

7 Days - 58% 28 Days - 10%

Compressive Strength (PSI)ASTM G595 Minimum Mixed With Pozalite®

DAYS DAYS3 7 28 3 7 28- 1500 3000 1981 2384 3317

Mixing Instructions1 Mixer Load 2 Mixer Load 3 Mixer Load

4 LBS. 8 LBS. 12 LBS.(1 Container) (2 Containers) (1/4 Bag)

Note: Exceeding mixing amount will not adversely affect the stucco mix.

For Additional Information Contact:Stockton Products™

1-87 -STOCKTON - (877-862-5866)www.StocktonProducts.com©2011 Stockton Products. All rights reserved worldwide.

www.POZALITE.com

POZALITE® is a uniqueconcrete/stucco enhancer that improves pumpability,strength and open-time ofcementitious materials.

� Reduces Shrinkage� Reduces Cracking� Reduces Water Use� Reduces Maintenance Costs� Improves Overall Strength� Increases Sheer and

Flexural Strength� Enables Pumping to Greater

Heights & Distances

The use of POZALITE® meanseasier screeding and troweling,smoother pumping, greaterproductivity, better workmanshipand faster clean-up.

When used as designed, POZALITE®

presents no safety or health hazards. As aprecaution, wear respirator or dust maskto avoid inhalation of dust. Wet materialmay be very slippery. MSDS available.

©2011 Stockton Products. All rights reserved worldwide.

NEWFrom Stockton Products ™

4 PoundsSingle Charge Package

"Better Efficiency Save You Time And Money."

For Technical Questions Or More Information Contact Us At

1-87-STOCKTON(877-862-5866)or Visit on Online

POZALITE® is a unique concrete/stucco enhancerthat improves pumpability, strength and open-timeof cementitious materials.

When Pumping...� Ends Problems When Pumping

Material To Heights And Distances� Ends Jerking & Packing Hoses� Primes The Pump For Faster,

Easier Start-Up.� Aids End-Of-The-Day Cleanup� Extends Equipment Life� Reduces Maintenance Costs� Reduces Shrinkage and Cracking� Reduces Water Use� Improves Overall Strength� Increases Sheer & Flexural Strength

The use of POZALITE® means easier troweling,smoother pumping, greater productivity, betterworkmanship and faster clean-up.

When used as designed, POZALITE® presents no safety orhealth hazards. As a precaution, wear respirator or dust maskto avoid inhalation of dust. Wet material may be very slippery.MSDS available.

For Technical Questions Or More Information Contact Us At

1-87-STOCKTON(877-862-5866) or Visit on Online

Holds Moisture Longer AllowingMore "Open Time" For Smoother,Easier Troweling And Screeding.

50 Pound BagFor Larger Applications

www.POZALITE.com