BRITISH STANDARDS INSTITUTION – BSI

BSI ERC Collections:

← Engineering Components and Equipment (2700+ documents) ← Documentation and Quality Assurance (1200+ documents) ← Domestic, Office, and Institutional (1800+ documents) ← Health and Safety (1850+ documents) ← Civil Engineering and Building (2600+ documents) ← Electronics and Aerospace (4800+ documents) ← Electronic Components of Assessed Quality (750+ documents) ← Chemicals and Additives (2300+ documents) ← F-Specs (250+ documents) ← Materials (2250+ documents) ← Metrology, Packaging and Print (1500 documents) ← Process and Heavy Engineering (1900+ documents) ← Production and Plant (2050+ documents)

BSI - Engineering Components and Equipment CollectionDescription: The Engineering Components and Equipment Section contains more than 2700 active and historical (back to 20 years) standards for the following areas:

← Automobile and other road transport standards ← Switchgear ← Fixings and fastenings ← Agricultural vehicles and implements ← General purpose pipework and fittings and hoses ← Mechanical power transmission ← Mechanical power units, gears, bearings, bushes, lamps, and general electrical equipment

Popular Standards from this Collection.

BSI BS 1083 Precision Hexagon Bolts, Screws and Nuts (B.S.W. and B.S.F. Threads)-Amd 2;

BSI BS 1361 Cartridge Fuses for a.c. Circuits in Domestic and Similar Premises (AMD 6692) January 31, 1991-Amd 3;

BSI BS 1362 General purpose fuse links for domestic and similar purposes (primarily for use in plugs)-AMD 6691: April 1991;

BSI BS 1363- 1

13 A Plugs, Socket-Outlets, Adaptors and Connection Units - Part 1: Specification for Rewirable and Non-Rewirable 13 A Fused Plugs-AMD 14539: October 9, 2003; Together with BS 1363-2:1995 Supersedes BS 1363:1984;

BSI BS 1363- 2

13 A Plugs, Socket-Outlets, Adaptors and Connection Units - Part 2: Specification for 13 A Switched and Unswitched Socket-Outlets-AMD 14538: October 9, 2003; Together with BS 1363-1:1995 Supersedes BS 1363:1984;

BSI BS 1363- 3

13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for adaptors-AMD 14540: October 9, 2003;

BSI BS 1363- 4

13 A plugs, socket-outlets, adaptors and connection units Part 4: Specification for 13 A fused connection units switched and unswitched-AMD 14537: October 9, 2003;

BSI BS 1387 Screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads-AMD 5830: May 1989; Reprinted incorporating Amendment No. 1;

BSI BS 143 & 1256 Threaded Pipe Fittings in Malleable Cast Iron and Cast Copper Alloy

BSI BS 148 Unused and Reclaimed Mineral Insulating Oils for Transformers and Switchgear

BSI BS 1574 Split Pins (Inch Series) (E)

BSI BS 1580 PARTS 1 & 2 Unified Screw Threads Parts 1 and 2: Diameters Quarter of an Inch and Larger-Amd 2;

BSI BS 1580- 3

Unified Screw Threads Part 3: Diameters Below Quarter of an Inch-AMD 5918: September 1966; AMD 1344: January 1974; AMD 2783: March 1979

BSI BS 159 High-Voltage Busbars and Busbar Connections

BSI BS 1657 Buttress Threads

BSI BS 171 Power Transformers-Amd 3;

BSI BS 1726- 1

Cylindrical Helical Springs Made from Round Wire and Bar Guide to Methods of Specifying, Tolerances and Testing Part 1: Compression Springs-Together with BS 8726-1: 2002 and BS EN 13906-1: 2002, Supersedes BS 1726-1: 1987;

BSI BS 1768 Unified Precision Hexagon Bolts, Screws and Nuts (UNC and UNF Threads). Normal Series-Amd 3;

BSI BS 1804- 2 Parallel steel Dowel pins - Part 2: Metric series-AMD 8359: March 1995;

BSI BS 1806 Dimensions of Toroidal Sealing Rings (O-Rings) and Their Housings (Inch Series)-AMD 6953; May 15, 1992

BSI BS 1906 Hose Couplings (Air and Water) One Eighth of an Inch to 1 and a Quarter Inch in Nominal Sizes-Amd 6;

BSI BS 1936 PART 1 Undercuts and Runouts for Screw Threads Part 1: Inch Screw Threads- Amd 2;

BSI BS 1936 PART 2

Undercuts and Runouts for Screw Threads Part 2: Specification for ISO Metric Screw Threads-Amd 1; (AMD 8584) May 15, 1995

BSI BS 1981 Unified Machine Screws and Machine Screw Nuts (AMD 7485) January 15, 1993-Amd 1;

BSI BS 21 Pipe Threads for Tubes and Fittings Where Pressure-Tight Joints Are Made on the Threads (Metric Dimensions)-AMD 6633: December 21, 1990;

BSI BS 2470 Hexagon Socket Screws and Wrench Keys. Inch Series-AMD 4127: November 30, 1983;

BSI BS 2693 PART 1 Screwed Studs Part 1: General Purpose Studs-Amd 3;

BSI BS 2754 Memorandum Construction of Electrical Equipment for Protection Against Electric Shock-AMD 2211; February 1977;

BSI BS 2917 PART 1

Graphic Symbols and Circuit Diagrams for Fluid Power Systems and Components Part 1: Specification for Graphic Symbols-ISO 1219-1: 1991; Supersedes BS 2819: 1977;

BSI BS 31 Steel Conduit and Fittings for Electrical Wiring-AMD 5383: June 30, 1987; Partically Superseded by BS EN 50086

BSI BS 3170 Flexible couplings for power transmission

BSI BS 3409 PART 1

Tapping of Holes to Receive Wire Thread Inserts (UNC and UNF Threads) Part 1: Diameters Quarter of an Inch and over (Formerly BS 3409: 1961)-Amd 3;

BSI BS 3409 PART 2

The Tapping of Holes to Receive Wire Thread Inserts (UNC and UNF Threads) Part 2: Diameters Below Quarter of an Inch-Amd 2;

BSI BS 341 PART 1

Transportable Gas Container Valves Part 1: Specification for Industrial Valves for Working Pressures up to and Including 300 Bar-AMD 7641; May 15, 1993; Partially Superseded by BS EN 849:1997, BS EN ISO 11340: 2001 and BS EN ISO 14246: 2001

BSI BS 3410 Metal Washers for General Engineering Purposes

BSI BS 3506 Unplasticized PVC Pipe for Industrial Purposes-Amd 2;

BSI BS 3580 Guide to Design Consideration on the Strength of Screw Threads

BSI BS 3643 PART 2 ISO Metric Screw Threads: Selected Limits of Size-Amd 1;

BSI BS 3643- 1 Specification for ISO Metric Screw Threads - Principles and Basic Data- Amd 2;

BSI BS 3673 PART 4 Spring Retaining Rings Part 4: Carbon Steel Circlips, Metric Series-Amd 1;

BSI BS 3676- Switches for Household and Similar Fixed Electrical Installations Part 1: Specification for General

1 Requirements-CORR 10625; August 1999; Superseded by BS EN 60669-1:1996 but remains current

BSI BS 3692 ISO Metric Precision Hexagon Bolts, Screws and Nuts - Specification- CORR 13183: May 2001;

BSI BS 3858 Binding and Identification Sleeves for Use on Electric Cables and Wires (E)

BSI BS 4102 Steel Wire for General Fencing Purposes

BSI BS 4168 PART 1

Hexagon Socket Screws and Wrench Keys; Metric Series Part 1: Hexagon Socket Head Cap Screws-AMD 5652; July, 29 1987; Superseded by BS EN ISO 4762: 1998

BSI BS 4168 PART 6

Hexagon Socket Screws and Wrench Keys; Metric Series Part 6: Specification for Hexagon Socket Button Head Screws-Amd 1; Superseded by BS EN ISO 7380: 1998

BSI BS 4168 PART 7

Hexagon Socket Screws and Wrench Keys; Metric Series Part 7: Specification for Hexagon Socket Shoulder Screws-Amd 1;

BSI BS 4168 PART 8

Hexagon Socket Screws and Wrench Keys; Metric Series Part 8: Specification for Hexagon Socket Countersunk Head Screws-AMD 5569; August 28, 1987; Superseded by BS EN ISO 10642: 1998

BSI BS 4174 Self-Tapping Screws and Metallic Drive Screws (AMD 8549) May 15, 1995 (E)-Amd 1;

BSI BS 4183 Machine screws and machine screw nuts - Metric series-AMD 8550: May 1995;

BSI BS 4190 ISO Metric Black Hexagon Bolts, Screws and Nuts - Specification

BSI BS 4235 PART 1 Metric Keys and Keyways Part 1: Parallel and Taper Keys (AMD 8776) September 15, 1995 (E)-Amd 3;

BSI BS 4235 PART 2 Metric Keys and Keyways Part 2: Woodruff Keys and Keyways

BSI BS 4293 Residual Current- Operated Circuit- Breakers-AMD 6279; December 21, 1990; Partially replaced by BS EN 61008-1:1995 and BS IEC 1008-2-2:1990;

BSI BS 4320 Metal washers for general engineering purposes metric series

BSI BS 4346 PART 3

Joints and Fittings for Use with Unplasticized PVC Pressure Pipes Part 3: Solvent Cements-Amd 1; Partially Superseded by BS EN 1452 Parts 1-5:2000

BSI BS 436 PART 1 Spur and Helical Gears Part 1: Basic Rack Form, Pitches and Accuracy (Diametral Pitch Series)-Amd 1;

BSI BS 436 PART 2 Spur and Helical Gears Part 2: Basic Rack Form, Modules and Accuracy (1 to 50 Metric Module)-Amd 1;

BSI BS 436 PART 3

Spur and Helical Gears Part 3: Method for Calculation of Contact and Root Bending Stress Limitations for Metallic Involute Gears-Amd 1;

BSI BS 436 PART 4

Cylindrical Gears - ISO System of Accuracy Part 4: Definitions and Allowable Values of Deviations Relevant to Corresponding Flanks of Gear Teeth-AMD 9588; August 1997; ISO 1328-1: 1995;

BSI BS 4377 Tapping of Holes to Receive Wire Thread Inserts (ISO Metric Threads) (AMD 7824) September 15,1993 (E)-Amd 1;

BSI BS 4395 PART 1

High Strength Friction Grip Bolts and Associated Nuts and Washers for Structural Engineering Part 1: General Grade-Amd 2;

BSI BS 4395- 2

High Strength Friction Grip Bolts and Associated Nuts and Washers for Structural Engineering Metric Series - Part 2: Higher Grade Bolts and Nuts and General Grade Washers-AMD 2186: December 1976;

BSI BS 4429 Rigging Screws and Turnbuckles for General Engineering, Lifting Purposes and Pipe Hanger Appliances (AMD 5875) June 30, 1989-Amd 1;

BSI BS 4439 Screwed Studs for General Purposes

BSI BS 4444 Guide to Electrical Earth Monitoring and Protective Conductor Proving

BSI BS 4463 Crinkle Washers for General Engineering Purposes (Metric Series)

BSI BS 4464 Spring Washers for General Engineering and Automobile Purposes (Metric Series)-Amd 1;

BSI BS 450 Machine Screws and Machine Screw Nuts (B.S.W. and B.S.F. Threads)-Amd 3;

BSI BS 4518 Metric Dimensions of Toroidal Sealing Rings (O-Rings) and Their Housings-Amd 1;

BSI BS 4568 PART 1

Steel Conduit and Fittings with Metric Thread of ISO Form for Electrical Installations Part 1: Steel Conduit, Bends and Couplers (AMD 5384) January 30, 1987-Amd 2;

BSI BS 46 PART 1 Keys and Keyways and Taper Pins Part 1: Keys and Keyways-Amd 3;

BSI BS 4607 PART 1

Non-Metallic Conduit Fittings for Electrical Installations Part 1: Fittings and Components of Insulating Material-Amd 1;

BSI BS 4607 PART 2

Non-Metallic Conduit Fittings for Electrical Installations Part 2: Rigid PVC Conduits and Conduit Fittings, Imperial Units

BSI BS 4662 Boxes for the enclosure of electrical accessories-AMD 6347: August 1991; Supersedes BS 1363: 1967;

BSI BS 4929 PART 1

Steel Hexagon Prevailing-Torque Type Nuts Part 1: Metric Series-Amd 1; Partially Superseded by BS EN ISO 7719: 1998 and BS EN ISO 2320: 1998 Also Superseded by BS EN ISO 7042: 1998;

BSI BS 4933 ISO Metric Black Cup and Countersunk Head Bolts and Screws with Hexagon Nuts

BSI BS 5045 PART 2

Transportable Gas Containers Part 2: Specification for Steel Containers of 0.5 L up to 450 L Water Capacity with Welded Seams (AMD 7911) October 15, 1993 (E)-Amd 2;

BSI BS 5163- 1

Valves for waterworks purposes Part 1: Predominantly key-operated cast iron gate valves Code of practice-Along with BS 5163-2:2004, BS EN 1074-1:2000 and BS EN 1074-2:2000 supersedes BS 5163:1986

BSI BS 5163- 2

Valves for waterworks purposes Part 2: Stem caps for use on isolating valves and associated water control apparatus Specification-Along with BS 5163-1:2004, BS EN 1074-1:2000 and BS EN 1074-2:2000 supersedes BS 5163:1986

BSI BS 5200 Dimensions of Hydraulic Connectors and Adaptors-AMD 10153; February 15, 1999

BSI BS 5244 Recommendations for Application, Storage and Life Expiry of Hydraulic Rubber Hose and Assemblies

BSI BS 5308 PART 1 Instrumentation Cables Part 1: Specification for Polyethylene Insulated Cables-AMD 7617: July 15, 1993

BSI BS 5308- 2 Instrumentation Cables - Part 2: Specification for PVC Insulated Cables- AMD 7618: July 15, 1993

BSI BS 5315 Hose Clamps (Worm Drive Type) for General Purpose Use (Metric Series)

BSI BS 545 Bevel Gears (Machine Cut)-Amd 2;

BSI BS 546 Two-Pole and Earthing-Pin Plugs, Socket-Outlets and Socket-Outlet Adaptors for AC (50-60 Hz) Circuits up to 250 V-AMD 8914: May 1999; Confirmed January 1988;

BSI BS 5467 Electric cables Thermosetting insulated, armoured cables for voltages of 600/1 000 V and 1 900/3 300 V-AMD 14196: February 25, 2004; AMD 15645: April 29, 2005

BSI BS 5486 PART 11 Low-Voltage Switchgear and Controlgear Assemblies Part 11: Particular Requirements of Fuseboards

BSI BS 5486 PART 12

Low-Voltage Switchgear and Controlgear Assemblies Part 12: Particular Requirements of Type- Tested Miniature Circuit-Breaker Boards

BSI BS 5486 PART 13

Low-Voltage Switchgear and Controlgear Assemblies Part 13: Specification for Particular Requirements of Consumer Units (AMD 6554) April 30, 1991-Amd 1;

BSI BS 57 B.A. Screws, Bolts and Nuts-Amd 3;

BSI BS 5733 General Requirements for Electrical Accessories (AMD 9157) May 15, 1996 (E)-Amd 1;

BSI BS 5958 Control of Undesirable Static Electricity Part 1: General Considerations

PART 1

BSI BS 5958 PART 2 Control of Undesirable Static Electricity Part 2: Recommendations for Particular Industrial Situations

BSI BS 6004Electric cables PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring-AMD 14195: February 25, 2004; AMD 15646: April 26, 2005; Together with BS 6500:2000 and BS 6007:2000 supers

BSI BS 6007Electric Cables - Single Core Unsheathed Heat Resisting Cables for Voltages up to and Including 450/750 V, for Internal Wiring-Together with BS 6500:2000 and BS 6004:2000 supersedes BS 6141:1991

BSI BS 6121- 1 Mechanical cable glands Part 1: Armour glands Requirements and test methods

BSI BS 6121- 5

Mechanical cable glands Part 5: Code of practice for selection, installation and inspection of cable glands and armour glands

BSI BS 6133 Code of Practice for Safe Operation of Lead- Acid Stationary Batteries (E)

BSI BS 6231 Specification for PVC-Insulated Cables for Switchgear and Controlgear Wiring-AMD 15648: June 17, 2005

BSI BS 6290- 2

Lead-Acid Stationary Cells and Batteries -Part 2: Specification for the High-Performance Plante Positive Type-CORR 10837 February 2000;

BSI BS 6290- 4

Lead-Acid Stationary Cells and Batteries - Part 4: Specification for Classifying Valve Regulated Types-AMD 13561: October 2, 2002;

BSI BS 6346 Electric cables PVC insulated, armoured cables for voltages of 600/1 000 V and 1 900/3 300 V-AMD 14197: February 25, 2004; AMD 15650: April 29, 2005

BSI BS 6500Electric cables Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments-AMD 13631:March 21, 2002; AMD 14200:February 25, 2004; CORR 15407:October 21, 2004; AMD 15651:April 26,

BSI BS 6501- 1 Metal hose assemblies Part 1: Guidance on the construction and use of corrugated hose assemblies

BSI BS 6622 Specification for Cables with Extruded Cross-Linked Polyethylene or Ethylene Propylene Rubber Insulation for Rated Voltages from 3.8/6.6 kV up to 19/33 kV-AMD 13535; February 26, 2002;

BSI BS 6626 Code of Practice for Maintenance of Electrical Switchgear and Controlgear for Voltages Above 1 kV and up to and Including 36 kV (AMD 6813) December 24, 1991 (N)-Amd 2;

BSI BS 6724 Electric cables Thermosetting insulated, armoured cables for voltages of 600/1 000 V and 1 900/3 300 V, having low emission of smoke and corrosive gases when affected by fire-AMD 14206: February 25,

2004; AMD 15652: April 29, 2005

BSI BS 721 PART 1 Worm Gearing-Amd 2;

BSI BS 721 PART 2 Metric Units-AMD 4601: June 1984

BSI BS 7211Electric cables Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire-AMD 14201: February 6

BSI BS 7419 Holding Down Bolts

BSI BS 7430 Code of Practice for Earthing

BSI BS 7752 PART 1 Free Running Type Wire Thread Inserts Part 1: Specification for ISO Metric Coarse Pitch Threads (E)

BSI BS 778 Specification for Steel Pipes and Joints for Hydraulic Purposes-AMD PD 5808: March 1966; AMD PD 6205: July 1967; AMD 1850: October 1975

BSI BS 7919Electric cables Flexible cables rated up to 450/750 V, for use with appliances and equipment intended for industrial and similar environments-AMD 13777: October 2, 2002; AMD 14202: February 25, 2004; AMD 15658: April 26, 2005: Together with BS 6500:20

BSI BS 84 Parallel Screw Threads of Whitworth Form-Amd 1;

BSI BS 864 PART 2

Capillary and Compression Tube Fittings of Copper and Copper Alloy Part 2: Specification for Capillary and Compression Fittings for Copper Tubes-AMD 7067; February 28, 1992; Superseded by BS EN 1254-1 and BS EN 1254-2

BSI BS 88 PART 5

Cartridge Fuses for Voltages up to and Including 1000 V a.c. and 1500 V d.c. Part 5: Specification of Supplementary Requirements for Fuse-Links for Use in a.c. Electricity Supply Networks-AMD 6695; April 30, 1991;

BSI BS 916 Black Bolts, Screws and Nuts-Amd 4;

BSI BS 919 PART 1 Screw Gauge Limits and Tolerances Part 1: Gauges for Screw Threads of Unified Form-Amd 3;

BSI BS 919 PART 3 Screw Gauge Limits and Tolerances: Part 3: Gauges for ISO Metric Screw Threads-Amd 1;

BSI BS 919 PART 4

Screw Gauge Limits and Tolerances Part 4: Limits of Size for Gauges for Screw Threads of Unified Form, Diameters Quarter of an Inch and Larger

BSI BS 949 PART 1 Screwing Taps Part 1: Specification of General Dimensions-AMD 7926; September 15, 1993;

BSI BS 978 PART 1 Fine Pitch Gears Part 1: Involute Spur and Helical Gears-Amd 3305: May 1980

BSI BS EN 10216- 1

Seamless steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties-AMD 15150: May 7, 2004; Together with BS EN 10217-1: 2002, Supersedes BS 3601: 1987 and BS 3059-1: 1987

BSI BS EN 10216- 2

Seamless steel tubes for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties-AMD 15151:May 10, 2004; Together with BS EN 10217-2: 2002, Supersedes BS 3059-2, BS 3602- 1

BSI BS EN 10216- 3

Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Alloy Fine Grain Steel Tubes-AMD 15152: May 6, 2004

BSI BS EN 10216- 4

Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties- AMD 15153: May 7, 2004; Supersedes BS 3603:1991

BSI BS EN 10217- 1

Welded Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 1: Non-Alloy Steel Tubes with Specified Room Temperature Properties-Together with BS EN 10216-1: 2002, Supersedes BS 3601: 1987 and BS 3059-1: 1987;

BSI BS EN 10217- 2

Welded steel tubes for pressure purposes Technical delivery conditions Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties-Together with BS EN 10216-2:2002 it supersedes BS 3059-2:1990, BS 3602- 1:198

BSI BS EN 10217- 3

Welded steel tubes for pressure purposes Technical delivery conditions Part 3: Alloy fine grain steel tubes-Together with BS EN 10217-5:2002 it supersedes BS 3602- 2:1991;

BSI BS EN 10217- 4

Welded steel tubes for pressure purposes Technical delivery conditions Part 4: Electric welded non-alloy steel tubes with specified low temperature properties- Together with BS EN 10216-4:2002 it supersedes BS 3603:1991;

BSI BS EN 10217- 5

Welded steel tubes for pressure purposes Technical delivery conditions Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperatures properties-Together with BS EN 10217-3:2002 it supersedes BS 3602- 2:1991;

BSI BS EN 10217- 6

Welded steel tubes for pressure purposes Technical delivery conditions Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties

BSI BS EN 10241 Steel Threaded Pipe Fittings-Supersedes BS 1740-1:1971;

BSI BS EN 12266- 1

Industrial valves Testing of valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements-CORR 14505; May 23, 2003; Supersedes BS 6755-1:1986;

BSI BS EN 12266- 2

Industrial Valves - Testing of Valves Part 2: Tests, Test Procedures and Acceptance Criteria Supplementary Requirements-CORR 14506; May 23, 2003; Supersedes BS 6755-1:1986;

BSI BS EN 1254- 1

Copper and Copper Alloys - Plumbing Fittings - Part 1: Fittings with Ends for Capillary Soldering or Capillary Brazing to Copper Tubes-Incorporating Corrigendum No.1; CORR 10099; July 1998; Together with BS EN 1254-2 Supersedes BS 864-2: 1983

BSI BS EN 1254- 2

Copper and Copper Alloys - Plumbing Fittings - Part 2: Fittings with Compression Ends for Use with Copper Tubes-Together with BS EN 1254-1 Supersedes BS 864-2: 1983

BSI BS EN 1254- 3

Copper and Copper Alloys - Plumbing Fittings - Part 3: Fittings with Compression Ends for Use with Plastics Pipes-Supersedes BS 864-5: 1990

BSI BS EN 1254- 4

Copper and Copper Alloys - Plumbing Fittings - Part 4: Fittings Combining Other End Connections with Capillary or Compression Ends-AMD 10750 November 1999

BSI BS EN 1254- 5

Corr. 1 Copper and Copper Alloys - Plumbing Fittings - Part 5: Fittings with Short Ends for Capillary Brazing to Copper Tubes-CORR. 10100; July 1998;

BSI BS EN 13480- 6 Metallic industrial piping Part 6: Additional requirements for buried piping

BSI BS EN 14015

Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above-CORR 15597:February 11, 2005; Supersedes BS 2654:1989

BSI BS EN 1452- 1

Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 1: General-CORR 11007: July 2000; CORR 2 12004: October 2000; BS EN 1452 Parts 1-5:2000 Supersedes BS 3505:1986, BS 4346-1:1969 and BS 4346- 2:1970; BS EN 1452

BSI BS EN 1452- 2

Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 2: Pipes-CORR 10999: July 2000; CORR 2 12005: October 2000; BS EN 1452 Parts 1-5:2000 Supersedes BS 3505:1986, BS 4346-1:1969 and BS 4346-2:1970; BS EN 1452 P

BSI BS EN 1452- 3

Plastics piping systems for water supply Unplasticized poly (vinyl chloride) (PVC-U) Part 3: Fittings-CORR 12006: October 2000; BS EN 1452 Parts 1-5: 2000 supersedes BS 3505: 1986, BS 4346-1:1969, BS 4346-2: 1970 and BS 4346-3: 1982;

BSI BS EN 1452- 4

Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 4: Valves and Ancillary Equipment-CORR 12007: October 2000; Supersedes BS 3505: 1986, BS 4346-1: 1969 and BS 4346-2: 1970 which remain current; Partially repl

BSI BS EN 1452- 5

Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 5: Fitness for Purpose of the System-CORR 11014: July 2000; CORR 2 12008: October 2000; BS EN 1452 Parts 1-5:2000 Supersedes BS 3505:1986, BS 4346- 1:1969 and

BSI BS EN 1514- 1

Flanges and Their Joints - Dimensions of Gaskets for PN-Designated Flanges Part 1: Non-Metallic Flat Gaskets with or without Inserts-Supersedes BS 4865: Part 1: 1989;

BSI BS EN 1591- 1

Flanges and Their Joints - Design Rules for Gasketed Circular Flange Connections - Part 1: Calculation Method

BSI BS EN 1665 Hexagon Bolts with Flange - Heavy Series-AMD 10158; December 15, 1998;

BSI BS EN 1759- 1

Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, Class designated Part 1: Steel flanges, NPS 1/2 to 24-Supersedes BS 1560- 3.1:1989

BSI BS EN 20898- 2

Mechanical Properties of Fasteners Part 2: Nuts with Specified Proof Load Values - Coarse Thread (ISO 898-2: 1992) (E)

BSI BS EN 28601

Data Elements and Interchange Formats - Information Interchange - Representation of Dates and Times (ISO 8601: 1988) (AMD 7825) June 15, 1993 (Formerly BS 7151: 1989 Replaces BS 4760: 1971 and BS 5249: Part 1: 1976) (E)

BSI BS EN 50085- 1

Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements

BSI BS EN 50086- 1

Specification for Conduit systems for cable management Part 1: General requirements-AMD 12052: November, 2000; CORR 13548: February 26, 2002; CORR 15466: March 31, 2004; CORR 15466: March 31, 2004; Supersedes BS 731-1:1952, BS 6099-1:1981 and BS 4568-

BSI BS EN 50086-2- 1

Specification for Conduit systems for cable management Part 2: Particular requirements Section 2.1: Rigid conduit systems-AMD 10513: January 2000; CORR 13547: February 26, 2002

BSI BS EN 50086-2- 2

Specification for Conduit systems for cable management Part 2: Particular requirements Section 2.2: Pliable conduit systems-AMD 10514: January 2000; CORR 13546: February 26, 2002

BSI BS EN 50086-2- 3

Conduit Systems for Cable Management - Part 2: Particular Requirements - Section 2.3: Flexible Conduit Systems-CORR 13549; February 26, 2002

BSI BS EN 50086-2- 4

Specification for Conduit Systems for Cable Management - Part 2: Particular Requirements Section 2.4: Conduit Systems Buried Underground-AMD 13550: March 13, 2002;

BSI BS EN 50091-1- 2

Uninterruptible Power Systems (UPS) Part 1-2: General and Safety Requirements for UPS Used in Restricted Access Locations-CORR 10753; April 2000

BSI BS EN 50110- 1 Operation of Electrical Installations

BSI BS EN 50160

Voltage characteristics of electricity supplied by public distribution systems-CORR 15022: March 13, 2004; CORR 15181: May 19, 2004; CORR 15390: October 4, 2004

BSI BS EN 50262

Cable glands for electrical installations-AMD 13524: April 15, 2002; AMD 15520: February 21, 2005; Supersedes BS 6121-2:1989 and BS 6121-3:1990; Together with BS 6121-1:2005 supersedes BS 6121-1:1989

BSI BS EN 50272- 2 Safety Requirements for Secondary Batteries and Battery Installations - Part 2: Stationary Batteries

BSI BS EN 50281-1- 1

Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures - Construction and testing-AMD 13978: November 1, 2002; Together with BS EN 50281-1-2:1999 and BS EN 61241-14:2004 supersedes BS 6

BSI BS EN 545

Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water Pipelines - Requirements and Test Methods-Supersedes BS 4772:1988

BSI BS EN 593 Industrial Valves - Metallic Butterfly Valves

BSI BS EN 598

Ductile Iron Pipes, Fittings, Accessories and Their Joints for Sewerage Applications - Requirements and Test Methods (E)-Replaces BS 4772: 1988

BSI BS EN 60034- 11 Rotating electrical machines Part 11: Thermal protection-Supersedes BS 4999-111:1987

BSI BS EN 60034- 4

Rotating Electrical Machines Part 4: Methods for Determining Synchronous Machine Quantities from Tests-AMD 8875:November 15, 1995; Renumbers BS 4999:Part 104:1988

BSI BS EN 60044- 1

Instrument Transformers - Part 1: Current Transformers-AMD 14397: June 30, 2003; Supersedes BS 7626: 1993; IEC 60044-1: 1996;

BSI BS EN 60044- 2

Instrument Transformers - Part 2: Inductive Voltage Transformers-AMD 14395: June 30, 2003; Supersedes BS 7625:1993; IEC 60044-2:1997;

BSI BS EN 60060- 2

High-Voltage Test Techniques Part 2: Measuring Systems-AMD 10261; March 15, 1999; Supersedes BS 923: Part 3: 1980 and BS 923: Part 4: 1980;

BSI BS EN 60076- 1

Power transformers Part 1: General-AMD 9925: April 1998; AMD 13797: July 1, 2002; AMD 15461: December 13, 2004

BSI BS EN 60076- 2 Power Transformers Part 2: Temperature Rise-Supersedes BS 171: Part 2: 1978;

BSI BS EN 60076- 3

Power Transformers Part 3: Insulation Levels, Dielectric Tests and External Clearances in Air-Supersedes BS 171: Part 3:1987 which is Withdrawn;

BSI BS EN 60076- 4

Power Transformers Part 4: Guide to the Lightning Impulse and Switching Impulse Testing Power Transformers and Reactors

BSI BS EN 60076- 5

Power Transformers - Part 5: Ability to withstand Short Circuit-Supersedes BS 171-5:1978; IEC 60076-5:2000;

BSI BS EN 60079- 2 Electrical apparatus for explosive gas atmospheres Part 2: Pressurized enclosures p

BSI BS EN 60081

Double-Capped Fluorescent Lamps - Performance Specifications- Amd 2; AMD 14555: October 31, 2003; IEC 60081: 1997;

BSI BS EN 60085 Electrical insulation Thermal classification-Supersedes BS 2757:1986

BSI BS EN 60086- 2 Primary Batteries - Part 2: Physical and Electrical Specifications

BSI BS EN 60127- 1

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for minature fuse-links-AMD 14382: May 20, 2003

BSI BS EN 60127- 2 Miniature fuses Part 2: Cartridge fuse-links-AMD 14903: January 14, 2004

BSI BS EN 60238 Edison screw lampholders

BSI BS EN 60269- 1 Low-Voltage Fuses - Part 1: General Requirements-CORR 13161: August 31, 2001; IEC 60269-1: 1998

BSI BS EN 60269- 2

Low-Voltage Fuses - Part 2: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly for Industrial Application)-AMD 13814: September 24, 2002; Renumbers BS 88-2.1: 1988; IEC 60269-2: 1986

BSI BS EN 60269- 3

Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)-AMD 14901: February 23, 2004; Also Known as BS 88-3.1:1995; IEC 269-3:1987

BSI BS EN 60269- 4

Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices-AMD 14545: October 29, 2003; Renumbers BS 88- 4:1988

BSI BS EN 60298

A.C. Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and up to and Including 52 kV-AMD 13079:July 2001; IEC 60298: 1990;

BSI BS EN 60309- 1

Plugs, Socket-Outlets and Couplers for Industrial Purposes - Part 1: General Requirements-AMD 15217: June 30, 2004

BSI BS EN 60309- 2

Plugs, socket-outlets and couplers for industrial purposes Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories-AMD 15216: July 9, 2004

BSI BS EN 60439- 1

No. 1 Low-voltage switchgear and controlgear assemblies Part 1: Type- tested and partially type-tested assemblies-AMD 15206: June 30, 2004; CORR 15498: January 31, 2005

BSI BS EN 60439- 2

Low-Voltage Switchgear and Controlgear Assemblies Part 2: Particular Requirements for Busbar Trunking Systems (Busways)-IEC 60439-2: 2000

BSI BS EN Low-Voltage Switchgear and Controlgear Assemblies - Part 3: Particular Requirements for Low-Voltage

60439- 3 Switchgear and Controlgear Assemblies Intended to Be Installed in Places Where Unskilled Persons Have Access to Their Use - Distribution Boards- AMD 1346

BSI BS EN 60439- 4

Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS)

BSI BS EN 60439- 5

Low-Voltage Switchgear and Controlgear Assemblies Part 5: Particular Requirements for Assemblies Intended to Be Installed Outdoors in Public Places - Cable Distribution Cabinets (CDCs) for Power Distribution in Networks-AMD 10498; March 2000; IEC 60439

BSI BS EN 60529 Degrees of Protection Provided by Enclosures (IP Code)-AMD 10931: August 2000

BSI BS EN 60598- 1 Luminaires Part 1: General requirements and tests

BSI BS EN 60598-2- 18

Luminaires Part 2: Particular Requirements Section 2.18: Luminaires for Swimming Pools and Similar Applications-AMD 9338 January 15, 1997;

BSI BS EN 60598-2- 2

Luminaires Part 2: Particular Requirements Section 2.2: Recessed Luminaires-AMD 9630: November 15, 1997; Supersedes BS 4533 SEC 102.2:1981; IEC 598-2- 2: 1996

BSI BS EN 60598-2- 20

Luminaires Part 2: Particular requirements Section 2.20 Lighting chains- AMD 10117:November 1998; CORR 10561:December 1999; AMD 15237:August 4, 2004; CORR 15417: October 27, 2004; CORR 15492:January 12, 2005

BSI BS EN 60598-2- 22

Luminaires - Part 2-22: Particular Requirements - Luminaires for Emergency Lighting-AMD 14393: June 20,2003

BSI BS EN 60598-2- 3 Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

BSI BS EN 60598-2- 4

Luminaires Part 2: Particular Requirements Section 2.4 Portable General Purpose Luminaires-Supersedes BS 4533: Part 102: Section 102.4: 1990

BSI BS EN 60598-2- 5

Luminaires - Part 2-5: Particular Requirements - Floodlights-CORR 10560; December 1999; Supersedes BS 4533-102.5: 1990; IEC 60598-2-5: 1998

BSI BS EN 60598-2- 6

Luminaires Part 2: Particular Requirements Section 2.6: Luminaires with Built-in Transformers for Filament Lamps-AMD 9553; September 1997; IEC 598-2-6: 1994

BSI BS EN 60664- 1

Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests-CORR 14806: October 21, 2003

BSI BS EN 60669-2- 1

Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches

BSI BS EN Common specifications for high-voltage switchgear and controlgear standards-AMD 13725: September

60694 18, 2002; IEC 60694:1996;

BSI BS EN 60726 Dry-type power transformers-Supersedes BS 7806: 1995;

BSI BS EN 60742

Isolating Transformers and Safety Isolating Transformers Requirements-Supersedes BS 3535: Part 1:1990; Also Known as BS 3535: Part 1:1996

BSI BS EN 60896- 1

Stationary Lead-Acid Batteries General Requirements and Methods of Test Part 1: Vented Types-AMD 7863: July 15, 1993; Partially Replaces BS 6290: Part 1: 1983; IEC 896-1: 1987

BSI BS EN 60898

Circuit-Breakers for Overcurrent Protection for Household and Similar Installations-AMD 13144; October 8,2001; Supersedes BS 3871-1:1965;

BSI BS EN 60898- 1

Electrical accessories Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation

BSI BS EN 60898- 2

Circuit-Breakers for Overcurrent Protection for Household and Similar Installations - Part 2: Circuit-Breakers for A.C. and D.C. Operation

BSI BS EN 60903 Live working Gloves of insulating material-CORR 15049: March 11, 2004;

BSI BS EN 60909- 0

Short-circuit currents in three-phase a.c. systems Part 0: Calculation of currents-CORR 13833:July 3, 2002; IEC 60909-0:2001

BSI BS EN 60947- 1 Low-voltage switchgear and controlgear Part 1: General rules-CORR 15485: February 8, 2005

BSI BS EN 60947- 2 Low-voltage switchgear and controlgear Part 2: Circuit-breakers

BSI BS EN 60947- 3

Low-Voltage Switchgear and Controlgear - Part 3: Switches, Disconnectors, Switch-Disconnectors and Fuse-Combination Units-AMD 13240: April 05, 2002;

BSI BS EN 60947-4- 1

Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor- Starters - Electromechanical Contactors and Motor-Starters-AMD 14559; August 15, 2003; Supersedes BS EN 60947-4-1:1992;

BSI BS EN 60947-4- 2

Low-voltage switchgear and controlgear Part 4-2: Contactors and motor- starters AC semiconductor motor controllers and starters-AMD 13852: October 11, 2002;

BSI BS EN 60947-4- 3

Low-Voltage Switchgear and Controlgear - Part 4.3: Contactors and Motor- Starters - AC Semiconductor Controllers and Contactors for Non-Motor Loads-IEC 60947-4-3: 1999;

BSI BS EN 60947-5- 1

Low-Voltage Switchgear and Controlgear - Part 5-1: Control Circuit Devices and Switching Elements - Electromechanical Control Circuit Devices-CORR 15484: January 31, 2005

BSI BS EN 60947-5- 2

Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches-AMD 10749: May 2000; AMD 15034: April 29, 2004

BSI BS EN 60947-5- 3

Low-Voltage Switchgear and Controlgear - Part 5-3: Control Circuit Devices and Switching Elements - Requirements for Proximity Devices with Defined Behaviour under Fault Conditions (PDF)-IEC 60947-5-3: 1999;

BSI BS EN 60947-5- 4

Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements Method of assessing the performance of low-energy contacts Special tests

BSI BS EN 60947-5- 5

Low-Voltage Switchgear and Controlgear Part 5-5: Control Circuit Devices and Switching Elements - Electrical Emergency Stop Devices with Mechanical Latching Function

BSI BS EN 60947-5- 6

Low-Voltage Switchgear and Controlgear - Part 5-6: Control Circuit Devices and Switching Elements - DC Interface for Proximity Sensors and Switching Amplifiers (NAMUR)-IEC 60947-5-6:1999;

BSI BS EN 60947-5- 7

Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for proximity devices with analogue output-Supersedes BS EN 50319:1999;

BSI BS EN 60947-6- 1

Low-Voltage Switchgear and Controlgear Part 6: Multiple Function Equipment Section 1: Automatic Transfer Switching Equipment-AMD 9941: April 1998;

BSI BS EN 60947-6- 2

Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment Control and protective switching devices (or equipment) (CPS)

BSI BS EN 60947-7- 1

Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors-CORR 14468: July 7, 2003;

BSI BS EN 60947-7- 2

Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment Protective conductor terminal blocks for copper conductors

BSI BS EN 60947-7- 3

Low-voltage switchgear and controlgear Part 7-3: Ancillary equipment Safety requirements for fuse terminal blocks-CORR 14469: July 16, 2003

BSI BS EN 60947- 8

Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

BSI BS EN 61000-4- 3

Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test-AMD 14277: March 26,2003; AMD 15528: February 23, 2005; Supersedes BS 6667 PART 3

BSI BS EN 61008- 1

Electrical Accessories - Residual Current Operated Circuit-Breakers without Integral Overcurrent Protection for Household and Similar Uses (RCCBs) - Part 1: General Rules-AMD 13141: December 18, 2001; Supersedes BS 4293: 1983 which remains current;

BSI BS EN 61008-2- 1

Residual Current Operated Circuit-Breakers without Integral Overcurrent Protection for Household and Similar Uses (RCCBs) Part 2-1: Applicability of the General Rules to RCCBs Functionally Independent of Line Voltage-AMD 10273; November 1998;

BSI BS EN 61010- 1

Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements-CORR 14512: September 19, 2003; IEC 61010- 1: 2001;

BSI BS EN 61058- 1 Switches for Appliances - Part 1: General Requirements

BSI BS EN 61241- 10

Electrical apparatus for use in the presence of combustible dust Part 10: Classification of areas where combustible dusts are or may be present-Supersedes BS EN 50281-3:2002

BSI BS EN 61326

Electrical Equipment for Measurement, Control and Laboratory Use - EMC Requirements-AMD 14445: June 25, 2004; AMD 13454: January 21,2002; AMD 10167: November 1998; IEC 61326:1997;

BSI BS EN 61340-5- 2

Electrostatics - Part 5-2: Protection of Electronic Devices from Electrostatic Phenomena - User Guide-CORR 12094: November 2000; AMD 13197: November 8, 2001; Renumbers PD IEC 61340-5-2:1999

BSI BS EN 61429

Marking of Secondary Cells and Batteries with the International Recycling Symbol ISO 7000-1135 and Indications Regarding Directives 93/86/EEC and 91/157/EEC-AMD 10539; March 2000;

BSI BS EN 61508- 3

Functional Safety of Electrical/Electronic/Programmable Electronic Safety- Related Systems - Part 3: Software Requirements-CORR 10630:August 1999; AMD 13781:March 15, 2002; Renumbers BS IEC 61508-3:1998

BSI BS EN 61508- 4

Functional Safety of Electrical/Electronic/Programmable Electronic Safety- Related Systems - Part 4: Definitions and Abbreviations-CORR 10632: August 1999; AMD 13782; March 15, 2002; Renumbers BS IEC 61508-4:1999

BSI BS EN 61508- 5

Functional Safety of Electrical/Electronic/Programmable Electronic Safety- Related Systems - Part 5: Example of Methods for the Determination of Safety Integrity Levels-AMD 13783:March 15, 2002; Renumbers BS IEC 61508-5:1998

BSI BS EN 61508- 6

Functional Safety of Electrical/Electronic/Programmable Electronic Safety- Related Systems - Part 6: Guidelines on the Application of IEC 61508-2 and IEC 61508-3-AMD 13784:MArch 15, 2002; CORR 13839: March 28, 2002; Renumbers BS IEC 61508- 6:2000

BSI BS EN 61508- 7

Functional Safety of Electrical/Electronic/Programmable Electronic Safety- Related Systems - Part 7: Overview of Techniques and Measures-AMD 13785:March 15, 2002; Renumbers BS IEC 61508-7:2000

BSI BS EN 61558- 1

Safety of power transformers, power supply units and similar Part 1: General requirements-Amd 10136: August 1998; AMD 14659: October 31, 2003; CORR 15086: May 24, 2004; Supersedes BS 3535 PART 2:1990

BSI BS EN 61558-2- 6

Safety of Power Transformers, Power Supply Units and Similar Part 2.6: Particular Requirements for Safety Isolating Transformers for General Use-AMD 10142 August 15, 1998; IEC 61558-2-6: 1997;

BSI BS EN 61558-2- 7

Safety of power transformers, power supply units and similar - Part 2.7: Particular requirements for transformers for toys-AMD 10143: August,1998; AMD 14231: April 1, 2003; CORR 15387: October 13, 2004

BSI BS EN High-voltage switchgear and controlgear Part 100: High-voltage alternating-current circuit-breakers-AMD

62271- 100 14682: August 28, 2003; Supersedes BS 5311:1996

BSI BS EN 62271- 203

High-voltage switchgear and controlgear Part 203: Gas-insulated metal- enclosed switchgear for rated voltages above 52 kV

BSI BS EN 853

Rubber Hoses and Hose Assemblies - Wire Braid Reinforced Hydraulic Type - Specification-Supersedes BS 3832: 1991;

BSI BS EN ISO 10380

Pipework - Corrugated metal hoses and hose assemblies-CORR 14452: April 11, 2003; Partially supersedes BS 6501-1: 1991;

BSI BS EN ISO 10497 Testing of valves Fire type-testing requirements-Supersedes BS 6755-2:1987

BSI BS EN ISO 10642 Hexagon Socket Countersunk Head Screws

BSI BS EN ISO 1234 Split Pins-Supersedes BS 7724: 1994;

BSI BS EN ISO 1580 Slotted Pan Head Screws - Product Grade A (E)

BSI BS EN ISO 228- 1

Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation-Together with BS EN ISO 228-2:2003, it supersedes BS 2779:1986;

BSI BS EN ISO 228- 2

Pipe threads where pressure-tight joints are not made on the threads Part 2: Verification by means of limit gauges-Together with BS EN ISO 228-1:2003 it supersedes BS 2779:1986;

BSI BS EN ISO 2338

Parallel Pins of Unhardened Steel and Austenitic Stainless Steel- Supersedes BS EN 22338: 1992 Which is Withdrawn;

BSI BS EN ISO 3506- 1

Mechanical Properties of Corrosion-Resistant Stainless Steel Fasteners Part 1: Bolts, Screws and Studs-In Conjunction with BS EN ISO 3506-2: 1998 it Supersedes BS 6105: 1981 Which is Withdrawn;

BSI BS EN ISO 3506- 2

Mechanical Properties of Corrosion-Resistant Stainless Steel Fasteners Part 2: Nuts-In Conjunction with BS EN ISO 3506-1: 1998 it Supersededs BS 6105: 1981 Which is Withdrawn;

BSI BS EN ISO 3506- 3

Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners Part 3: Set Screws and Similar Fasteners Not under Tensile Stress

BSI BS EN ISO 3506- 4

Mechanical properties of corrosion-resistant stainless-steel fasteners Part 4: Tapping screws-CORR 14636: August 5, 2003;

BSI BS EN ISO 4014 Hexagon Head Bolts - Product Grades A and B-Supersedes BS EN 24014:1992;

BSI BS EN ISO 4017 Hexagon Head Screws - Product Grades A and B-Supersedes BS EN 24017:1992;

BSI BS EN ISO 4026 Hexagon socket set screws with flat point-CORR 15066: April 2, 2004;

BSI BS EN ISO 4032 Hexagon Nuts, Style 1 - Product Grades A and B-Supersedes BS EN 24032:1992;

BSI BS EN ISO 4042 Fasteners - Electroplated Coatings-Supersedes BS 7371-3: 1993;

BSI BS EN ISO 4762 Hexagon socket head cap screws

BSI BS EN ISO 6708 Pipework Components - Definition and Selection of DN (Nominal Size) (E)

BSI BS EN ISO 7040 Prevailing Torque Type Hexagon Nuts (With Non-Metallic Insert), Style 1 - Property Classes 5, 8 and 10

BSI BS EN ISO 7045 Pan Head Screws with Type H or Type Z Cross Recess - Product Grade A (E)

BSI BS EN ISO 7046- 1

Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel of Property Class 4.8 (E)

BSI BS EN ISO 7089 Plain Washers - Normal Series - Product Grade A

BSI BS EN ISO 7093- 1 Plain Washers - Large Series - Part 1: Product Grade A-CORR 13151: May 2001;

BSI BS EN ISO 7380 Hexagon socket button head screws-CORR 15068: March 23, 2004

BSI BS EN ISO 8434- 1

Metallic Tube Connections for Fluid Power and General Use - Part 1: 24 Degrees Compresseion Fittings-AMD 9583: February 1998; Renumbers BS ISO 8434- 1:1994

BSI BS EN ISO 8734

Parrallel Pins, of Hardened Steel or Martensitic Stainless Steel (Dowel Pins)-Supersedes BS EN 28734: 1992 Which is Withdrawn;

BSI BS EN ISO 8752 Spring-Type Straight Pins - Slotted, Heavy Duty-Supersedes BS EN 28752: 1993;

BSI BS EN ISO 887 Plain Washers for Metric Bolts, Screws and Nuts for General Purposes - General Plan

BSI BS EN ISO 898- 1

Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 1: Bolts, Screws and Studs-Supersedes BS EN 20898-1: 1992;

BSI BS EN ISO 898- 5

Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 5: Set Screws and Similar Threaded Fasteners Not under Tensile Stresses-Supersedes BS 6104-3: 1981;

BSI BS EN ISO 898- 6

Mechanical Properties of Fasteners Part 6: Nuts with Specified Proof Load Values - Fine Pitch Thread (E)

BSI BS EN ISO 9906

Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2-CORR 13945: October 7, 2002; Supersedes BS 5316-1: 1976 and BS 5316-2: 1977;

BSI BS IEC 60076- 8 Power Transformers - Application Guide-Supersedes BS 5953-1: 1980; IEC 60076-8: 1997;

BSI BS IEC 60287-1- 3

Electric cables Calculation of the current rating Part 1-3: Current rating equations (100 % load factor) and calculation of losses Current sharing between parallel single-core cables and calculation of circulating current losses

BSI BS IEC 61000-5- 1

Electromagnetic Compatibility (EMC) Part 5: Installation and Mitigation Guidelines Section 1: General Considerations Basic EMC Publication

BSI BS IEC 61882 Hazard and Operability Studies (HAZOP Studies) - Application Guide

BSI BS IEC 62086- 1

Electrical Apparatus for Explosive Gas Atmospheres - Electrical Resistance Trace Heating - Part 1: General and Testing Requirements-CORR 14498: July 7, 2003; IEC 62086-1:2001;

BSI BS IEC TS 60034- 18-34

Rotating Electrical Machines - Part 18-34: Functional Evalution of Insulation Systems - Test Procedures for Form-Wound Windings - Evaluation of Thermomechnical Endurance of Insulation Systems-IEC TS 60034-18-34: 2000;

BSI BS ISO 10790

Measurement of Fluid Flow in Closed Conduits - Guidance to the Selection, Installation and Use of Coriolis Meters (Mass Flow, Density and Volume Flow Measurements)-Amendment 14803: January 6, 2004;

BSI BS ISO 12151- 1

Connections for Hydraulic Fluid Power and General Use - Hose Fittings - Part 1: Hose Fittings with ISO 8434-3 O-Ring Face-Seal Ends

BSI BS ISO 1940- 1

Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances-:1987

BSI BS ISO 261 ISO General Purpose Metric Screw Threads - General Plan

BSI BS ISO 262 ISO General Purpose Metric Screw Threads - Selected Sizes for Screws, Bolts and Nuts

BSI BS ISO 3046- 1

Reciprocating Internal Combustion Engines - Performance - Part 1: Declarations of Power, Fuel and Lubricating Oil Consumptions, and Test Methods - Additional Requirements for Engines for General Use-Supersedes BS 5514-1:1996;

BSI BS ISO 4406

Hydraulic Fluid Power - Fluids - Method for Coding the Level of Contamination by Solid Particles-Supersedes BS 5540-4:1988;

BSI BS ISO 4407

Hydraulic Fluid Power - Fluid Contamination - Determination of Particulate Contamination by the Counting Method Using an Optical Microscope-Supersedes BS 5540-8: 1991;

BSI BS ISO 6072

Hydraulic Fluid Power - Compatibility between Fluids and Standard Elastomeric Materials-Supersedes BS 4832: 1987;

BSI BS ISO 8434- 3 Metallic tube connections for fluid power and general use Part 3: O-ring face seal connectors

BSI BS ISO 8992 Fasteners - General requirements for bolts, screws, studs and nuts

BSI DD ENV 1591- 2

Flanges and Their Joints - Design Rules for Gasketed Circular Flange Connections - Part 2: Gasket Parameters

BSI PD CLC/TR 50404 Electrostatics Code of practice for the avoidance of hazards due to static electricity

BSI - Documentation and Quality Assurance CollectionDescription: The Documentation and Quality Assurance section contains more than 1200 active and historical (back to 20 years) standards for the following areas:

← Documentation ← Quantities ← Units ← Symbols ← Drawings office practices ← Quality assurance (including BS 5750) ← Stock control ← BS 1000M ← Sciences

Popular Standards from this Collection.

BSI BS 0- 1 A Standard for Standards - Part 1: Development of standards Specification

BSI BS 0- 2 A standard for standards Part 2: Structure and drafting Requirements and guidance

BSI BS 0- 3 Standard for Standards - Part 3: Specification for Structure, Drafting and Presentation-AMD 13507: February 28, 2002;

BSI BS 1042- 1.4

Measurement of Fluid Flow in Closed Conduits Part 1: Pressure Differential Devices Section 1.4: Guide to the Use of Devices Specified in Sections 1.1 and 1.2 (AMD 8154) June 15, 1994 (G)-Amd 1;

BSI BS 1339- 1 Humidity Part 1: Terms, definitions and formulae-CORR 14209: October 24, 2002; Supersedes BS 1339: 1965;

BSI BS 1635 Graphical Symbols and Abbreviations for Fire Protection Drawings (R)

BSI BS 1797 Schedule for Tables for Use in the Calibration of Volumetric Glassware

BSI BS 188 Determination of the Viscosity of Liquids

BSI BS 2011 PART 2.1T

Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1T: Test T. Soldering-AMD 6092: November 30, 1990;

BSI BS 2742 Use of the Ringelmann and Miniature Smoke Charts

BSI BS 2846 PART 1 Guide to Statistical Interpretation of Data Part 1: Routine Analysis of Quantitative Data (G)

BSI BS 2846 PART 2 Guide to Statistical Interpretation of Data Part 2: Estimation of the Mean: Confidence Limit

BSI BS 2846 PART 5

Guide to Statistical Interpretation of Data Part 5: Power of Tests Relating to Means and Variances

BSI BS 2846 PART 7

Guide to Statistical Interpretation of Data Part 7: Tests for Departure from Normality-ISO 5479: 1997;

BSI BS 3375 PART 5

Management Services Part 5: Guide to Determination of Exposure Limits, Recovery Times and Relaxation Times in Work Measurement

BSI BS 350 Conversion factors for units

BSI BS 3518 PART 1 Methods of Fatigue Testing Part 1: Guide to General Principles (G)

BSI BS 3811 Glossary of Terms Used in Terotechnology (G)

BSI BS 4211 Specification for Permanently fixed ladders

BSI BS 4301 Preparation of Drawings for Optical Elements and Systems (G)

BSI BS 4422 Fire Vocabulary-Supersedes BS 4422-2 thru BS 4422-7 and BS 4422- 9

BSI BS 4778 PART 2 Quality Vocabulary Part 2: Quality Concepts and Related Definitions (G)

BSI BS 4778 SEC 3.1

Quality Vocabulary Part 3: Availability, Reliability and Maintainability Terms Section 3.1: Guide to Concepts and Related Definitions (G)

BSI BS 4778- 3.2

Quality vocabulary Part 3: Availability, reliability and maintainability terms Section 3.2: Glossary of international terms-AMD 13998: December 17, 2002; IEC 60050(191): 1990;

BSI BS 4884 PART 1

Technical Manuals Part 1: Specification for Presentation of Essential Information (To be Read in Conjuction with BS 4884: Part 2 and Part 3:)

BSI BS 4884 PART 2

Technical Manuals Part 2: Guide to Content (To be Read in Conjuction with BS 4884: Part 1 and BS 4884: Part 3)

BSI BS 4884 PART 3 Technical Manuals Part 3: Guide to Presentation (G)

BSI BS 4937 PART 30

International Thermocouple Reference Tables Part 30: Extension and Compensating Cables. Tolerances and Identification System (G)

BSI BS 5070 PART 1

Engineering Diagram Drawing Practice Part 1: Recommendations for General Principles (AMD 8190) August 15, 1994 (G)-Amd 1;

BSI BS 5070- 3 Engineering diagram drawing practice Part 3: Recommendations for mechanical/fluid flow diagrams

BSI BS 5070- 4 Engineering diagram drawing practice Part 4: Recommendations for logic diagrams

BSI BS 5191 Production planning and control Vocabulary

BSI BS 5243 General Principles for Sampling Air- Borne Radioactive Materials

BSI BS 5378- 2 Safety Signs and Colours - Part 2: Specification for Colorimetric and Photometric Properties of Materials-AMD 5484: August 1987; Reprinted, Incorporating Amendments Nos. 1 and 2;

BSI BS 5454 Recommendations for the Storage and Exhibition of Archival Documents

BSI BS 5499 PART 2 Fire Safety Signs, Notices and Graphic Symbols Part 2: Self-Luminous Fire Safety Signs

BSI BS 5499- 1 Graphical Symbols and Signs - Safety Signs, Including Fire Safety Signs - Part 1: Specification for Geometric Shapes, Colours and Layouts

BSI BS 5499- 11 Graphical Symbols and Signs - Safety Signs, Including Fire Safety Signs - Part 11: Water

Safety Signs

BSI BS 5499- 4 Safety Signs, Including Fire Safety Signs - Part 4: Code of Practice for Escape Route Signing-CORR 12082: November 2000;

BSI BS 5499- 5 Graphical Symbols and Signs - Safety Signs, Including Fire Safety Signs - Part 5: Signs with Specific Safety Meanings-Supersedes BS 5378-1: 1980 and BS 5378-3: 1982;

BSI BS 5499- 6 Graphical symbols and signs Safety signs, including fire safety signs Part 6: Creation and design of graphical symbols for use in safety signs Requirements

BSI BS 5536 Preparation of Technical Drawings and Diagrams for Microfilming (G)

BSI BS 5700 Process Control Using Quality Control Chart Methods and Cusum Techniques-Amd 1;

BSI BS 5701- 1Guide to quality control and performance improvement using qualitative (attribute) data Part 1: Uses and value of attribute charts in business, industry, commerce and public service-BS 5701 Parts 1 Thru 4 Supersede BS 5701:1980 and BS 2564:1955;

BSI BS 5750 PART 8

Quality Systems Part 8: Guide to Quality Management and Quality Systems Elements for Services (ISO 9004-2: 1991) (AMD 7998) December 15, 1993 (G)-Amd 1;

BSI BS 5760 PART 0

Reliability of Constructed or Manufactured Products, Systems Equipment and Components Part 0: Introductory Guide to Reliability

BSI BS 5760 PART 12

Reliability of Systems, Equipment and Components Part 12: Guide to the Presentation of Reliability, Maintainability and Availability Predictions (IEC 863: 1986) (G)

BSI BS 5760 PART 14

Reliability of Systems, Equipment and Components Part 14: Guide to Formal Design Review (IEC 1160: 1992) (G)

BSI BS 5760 PART 15

Reliability of Systems, Equipment and Components Part 15: Guide to Application of Markov Techniques (IEC 1165: 1995) (G)

BSI BS 5760 PART 2

Reliability of Systems, Equipments and Components Part 2: Guide to the Assessment of Reliability (G)

BSI BS 5760 PART 3

Reliability of Systems, Equipments and Components Part 3: Guide to Reliability Practices: Examples

BSI BS 5760 PART 5

Reliability of Systems, Equipment and Components Part 5: Guide to Failure Modes, Effects and Criticality Analysis (FMEA and FMECA) (Read in Conjunction with BS 4778) (G)

BSI BS 5760 PART 7

Reliability of Systems, Equipment and Components Part 7: Guide to Fault Tree Analysis (G) (IEC 1025: 1990)

BSI BS 5760 Reliability of Systems, Equipment and Components Part 8: Guide to Assessment of

PART 8 Reliability of Systems Containing Software-Supersedes DD 198: 1991;

BSI BS 5760- 4 Reliability of systems, equipment and components Part 4: Guide to the specification of dependability requirements-Supersedes BS 5760-20: 1997;

BSI BS 600 A Guide to the Application of Statistical Methods to Quality and Standardization

BSI BS 6000- 1Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 1: General guide to acceptance sampling-Together with BS 6000-2 and BS 6000-3 Supersedes BS 6000:1996

BSI BS 6001 PART 0

Sampling Procedures for Inspection by Attributes Part 0: Introduction to the BS 6001 Attribute Sampling System (ISO 2859-0: 1995) (G)

BSI BS 6001 PART 2

Sampling Procedures for Inspection by Attributes Part 2: Specification for Sampling Plans Indexed by Limiting Quality (LQ) for Isolated Lot Inspection (ISO 2859-2: 1985) (G)

BSI BS 6001- 1Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot Inspection-CORR 13201; September 2001; ISO 2859-1: 1999;

BSI BS 6001- 3 Sampling procedures for inspection by attributes Part 3: Skip-lot sampling procedures-ISO 2859-3:2005

BSI BS 6001- 4 Sampling procedures for inspection by attributes Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection

BSI BS 6001- 5 Sampling procedures for inspection by attributes Part 5: Procedures for assessment of declared quality levels

BSI BS 6001- 7 Sampling Procedures for Inspection by Attributes - Part 7: Credit-Based Accept-Zero Sampling Schemes for the Control of Outgoing Quality for Lot-by-Lot Inspection

BSI BS 6001- 9Sampling Procedures for Inspection by Attributes Part 9: Double Sampling Plans Using Minimal Sample Sizes, Indexed by Producer s Risk Quality (PRQ) and Consumer s Risk Quality (CRQ)-Supersedes BS 2635: 1955;

BSI BS 6002 PART 1

Sampling Procedures for Inspection by Variables Part 1: Specification for Single Sampling Plans Indexed by Acceptable Quality Level (AQL) for Lot-by-Lot Inspection (ISO 3951: 1989) (G)

BSI BS 6002- 3 Sampling procedures for inspection by variables Part 3: Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

BSI BS 6079- 1 Project Management - Part 1: Guide to Project Management

BSI BS 6079- 2 Project Management - Part 2: Vocabulary-CORR 11015: August 2000

BSI BS 6079- 3 Project Management - Part 3: Guide to the Management of Business Related Project Risk

BSI BS 6100 PART 0 Building and Civil Engineering Terms Part 0: Introduction

BSI BS 6100 SEC 1.2

Glossary of Building and Civil Engineering Terms Part 1: General and Miscellaneous Section 1.2: Spaces

BSI BS 6100 SEC 2.1

Glossary of Building and Civil Engineering Terms Part 2: Civil Engineering Section 2.1: Structural Design and Elements-AMD 10245; February 1999;

BSI BS 6100 SEC 3.3

Glossary of Building and Civil Engineering Terms Part 3: Services Section 3.3: Sanitation-AMD 10246; February 1999

BSI BS 6100 SEC 6.2

Glossary of Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.2: Concrete-AMD 7264: August 15, 1992; Supersedes BS 2787: 1956

BSI BS 6100 SEC 6.5

Glossary of Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.5: Formwork-Supersedes BS 4340: 1968

BSI BS 6100 SUBSEC 2.4.1

Glossary of Building and Civil Engineering Terms Part 2: Civil Engineering Section 2.4: Highway, Railway and Airport Engineering Subsection 2.4.1: Highway Engineering-AMD 10242; February 1999

BSI BS 6100- 0 Glossary of Building and civil engineering terms Part 0: Introduction

BSI BS 6100- 1 Building and civil engineering Vocabulary Part 1: General terms-Also known as BS ISO 6707-1:2004

BSI BS 6100- 1.3.5

Glossary of Building and Civil Engineering Terms - Part 1: General and Miscellaneous - Section 1.3: Parts of Construction Works - Subsection 1.3.5: Doors, Windows and Openings

BSI BS 6100- 1.4.1

Glossary of Building and Civil Engineering Terms - Part 1: General and Miscellaneous - Section 1.4: Materials - Subsection 1.4.1: Glazing

BSI BS 6100- 1.5.1

Glossary of Building and Civil Engineering Terms - Part 1: General and Miscellaneous - Section 1.5: Operations; Associated Plant and Equipment - Subsection 1.5.1: Co-ordination of Dimensions; Tolerances and Accuracy

BSI BS 6100- 1.5.5

Glossary of Building and Civil Engineering Terms Part 1: General and Miscellaneous Section 1.5: Operations; Associated Plant and Equipment Subsection 1.5.5: Plant and Equipment-AMD 7243: August 15, 1992

BSI BS 6100- 2.2.2

Glossary of Building and Civil Engineering Terms - Part 2: Civil Engineering - Section 2.2: Substructures, Earthworks, Foundations, Tunnels - Subsection 2.2.2: Substructures and Foundations

BSI BS 6100- Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.6: Products,

6.6.2 Applications and Operations Subsection 6.6.2: Plaster-AMD 7267: August 15, 1992; Supersedes BS 4049: 1966

BSI BS 6143 PART 1

Guide to the Economics of Quality Part 1: Process Cost Model (G) (AMD 7633) May 15, 1993-Amd 1;

BSI BS 6143 PART 2 Guide to the Economics of Quality Part 2: Prevention, Appraisal and Failure Model

BSI BS 7000 PART 10 Design Management Systems Part 10: Glossary of Terms Used in Design Management

BSI BS 7000 PART 2

Design Management Systems Part 2: Guide to Managing the Design of Manufactured Products-This Part of BS 7000, Together with BS 7000: Part 3 and BS 7000: Part 4 Replaces BS 7000: Part 1: 1989;

BSI BS 7000 PART 4 Design Management Systems Part 4: Guide to Managing Design in Construction (G)

BSI BS 7000- 1 Design Management Systems - Part 1: Guide to Managing Innovation

BSI BS 7000- 3 Design Management Systems Part 3: Guide to Managing Service Design

BSI BS 7000- 5 Design Management Systems - Part 5: Guide to Managing Obsolescence

BSI BS 7000- 6 Design management systems Part 6: Managing inclusive design Guide- CORR 15638: May 20, 2005; CORR 15949: November 18, 2005

BSI BS 7231 PART 1

Body Measurements of Boys and Girls from Birth up to 16.9 Years Part 1: Information in the Form of Tables (G) (AMD 6749) September 30, 1991-Amd 1;

BSI BS 7373- 1 Product Specifications - Part 1: Guide to Preparation-AMD 13203: July 2001; Renumbers BS 7373:1998

BSI BS 7850 PART 1 Total Quality Management Part 1: Guide to Management Principles (G)

BSI BS 7850 PART 2

Total Quality Management Part 2: Guidelines for Quality Improvement (ISO 9004-4: 1993) (AMD 8437) February 15, 1995 (Technical Corr 1) (G)-Amd 1;

BSI BS 7863Recommendations for Colour coding to indicate the extinguishing media contained in portable fire extinguishers-AMD 9299:November 1996; AMD 9740:October 1997; Together with BS EN 3-1 thru -6 and BS 78671 supersedes BS 5423:1987

BSI BS 7974 Application of Fire Safety Engineering Principles to the Design of Buildings - Code of Practice-Supersedes DD 240-1:1997 and DD 240-2:1997;

BSI BS 8444 PART 3

Risk Management Part 3: Guide to Risk Analysis of Technological Systems (IEC 300-3-9: 1995) (G)

BSI BS 8501 Graphical symbols and signs Public information symbols-Supersedes BS 6034:1990;

BSI BS 8800 Occupational health and safety management systems Guide

BSI BS 8888 Technical product specification (TPS) - Specification

BSI BS EN 10168 Steel products Inspection documents List of information and description

BSI BS EN 12004

Adhesives for tiles - Definitions and specifications-AMD 14005: November 1, 2002; Supersedes BS EN 1322: 1999; and BS 5980:1980

BSI BS EN 12084

Non-Destructive Testing - Eddy Current Testing - General Principles and Guidelines-AMD 14962: February 9, 2004

BSI BS EN 12973 Value Management

BSI BS EN 1330- 2

Non-Destructive Testing - Terminology - Part 2: Terms Common to the Non-Destructive Testing Methods

BSI BS EN 1330- 3

Non-Destructive Testing - Terminology Part 3: Terms Used in Industrial Radiographic Testing-Supersedes BS 3683: Part 3: 1984;

BSI BS EN 1330- 4

Non-Destructive Testing - Terminology - Part 4: Terms Used in Ultrasonic Testing-Supersedes BS 3683-4:1985;

BSI BS EN 13306 Maintenance Terminology

BSI BS EN 1330- 7

Non-destructive testing Terminology Part 7: Terms used in magnetic particle testing-Supersedes BS 3683-2:1985

BSI BS EN 1333 Pipework Components - Definition and Selection of PN

BSI BS EN 13501- 1

Fire Classification of Construction Products and Building Elements Part 1: Classification Using Test Data from Reaction to Fire Tests

BSI BS EN 13501- 2

Fire classification of construction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services

BSI BS EN 1560 Founding - Designation System for Cast Iron - Material Symbols and Material Numbers

BSI BS EN Welded, Brazed and Soldered Joints - Symbolic Representation on Drawings (ISO 2553:

22553 1992) (G)

BSI BS EN 45012

General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems-Revision of BS 7512:1989

BSI BS EN 45020

Standardization and related activities - General vocabulary-Partially Superseded by BS EN ISO/IEC 17000:2004

BSI BS EN 473 Non-Destructive Testing - Qualification and Certification of NDT Personnel - General Principles-Supersedes PD 6606:1997;

BSI BS EN 50073

Guide for Selection, Installation, Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen-CORR 13167: June 2001; Supersedes BS 6959:1989;

BSI BS EN 50419

Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE)

BSI BS EN 60068- 1 Environmental Testing - Part 1: General and Guidance-IEC 68- 1:1988;:1989

BSI BS EN 60068-2- 1

Environmental testing - Part 2.1: Tests - Tests A: Cold-AMD 7783:7/1993; AMD 8425:1/1995

BSI BS EN 60068-2- 14

Environmental Testing - Part 2: Tests - Test N: Change of Temperature- Supersedes BS 2011-2.1N: 1985

BSI BS EN 60068-2- 2 Environmental testing - Part 2: Tests - Tests B: Dry Heat

BSI BS EN 60068-2- 27 Environmental testing Part 2: Tests Test Ea and guidance: Shock-IEC 68-2-27:1987;:1977

BSI BS EN 60068-2- 29

Environmental testing Part 2: Tests Test Eb and guidance: Bump-AMD 7827: June, 1993; Supersedes BS 2011-2.1 Eb: 1977

BSI BS EN 60068-2- 30

Environmental Testing - Part 2: Tests - Test Db and Guidance: Damp Heat, Cyclic (12 + 12 Hour Cycle)-IEC 60068-2-30: 1980, Including Amendment 1: August 1985; Supersedes BS 2011 Part 2.1DB:1981

BSI BS EN 60068-2- 31

Environmental testing Part 2.1 Tests Test Ec: Drop and topple, primarily for equipment-type specimens-AMD 7921: September 15, 1993; Renumbers BS 2011 Part 2.1EC:1977; IEC 68-2-31: 1969

BSI BS EN 60068-2- 32

Environmental testing Part 2.1: Tests Test Ed: Free fall-AMD 7920: September, 1993; Supersedes BS 2011-2.1 Ed: 1977

BSI BS EN Environmental testing Part 2: Tests Test Kb. Salt mist cyclic (sodiumchloride solution)-

60068-2- 52 Supersedes BS 2011-2.1Kb: 1987

BSI BS EN 60068-2- 55

Environmental Testing Part 2: Tests Test E3 and Guidance: Bounce-AMD 7828: June 15, 1993; Renumbers BS 2011: Part 2.1Ee; IEC 68-2-55: 1987

BSI BS EN 60068-2- 6 Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)

BSI BS EN 60068-2- 69

Environmental testing Part 2: Tests Test Te: Solderability testing of electronic components for surface mount technology by the wetting balance method

BSI BS EN 60068-2- 75

Environmental testing Part 2: Tests Test Eh. Hammer tests-Supersedes BS EN 60068-2-62: 1996 and BS EN 60068-2-63: 1995; IEC 60068-2-75: 1997;

BSI BS EN 60300- 1

Dependability management Part 1: Dependability management systems- Supersedes BS 5750-14:1993;

BSI BS EN 60300- 2 Dependability management Part 2: Guidelines for dependability management

BSI BS EN 60300-3- 1

Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology-AMD 15370:September 29,2004; Renumbers BS IEC 60300-3-1:2003

BSI BS EN 60300-3- 12 Dependability management Part 3-12: Application guide Integrated logistic support

BSI BS EN 60300-3- 14

Dependability management Part 3-14: Application guide Maintenance and maintenance support-Supersedes BS 6548-4:1993

BSI BS EN 60300-3- 2

Dependability management Part 3-2: Application guide Collection of dependability data from the field-Supersedes BS 5760-11:1994

BSI BS EN 60417- 1

Graphical Symbols for Use on Equipment - Part 1: Overview and Application-IEC 60417-1:1998;

BSI BS EN 60417- 2

Graphical Symbols for Use on Equipment - Part 2: Symbol Originals-AMD 13942:January 23, 2003; Supersedes BS 6217:1981; IEC 60417-2:1998;

BSI BS EN 60584- 1 Thermocouples Part 1: Reference Tables (IEC 584-1: 1995) (G)

BSI BS EN 60584- 2

Thermocouples Part 2: Tolerances (AMD 7864) July 15, 1993 (Formerly BS 4937: Part 20: 1991. Replaces BS 4937: Part 20: 1983) (G)-Amd 1;

BSI BS EN 60617- 10

Graphical Symbols for Diagrams Part 10: Telecommunications: Transmission-Replaces BS 3939: Part 10: 1985; IEC 617-10: 1996

BSI BS EN 60617- 11

Graphical Symbols for Diagrams Part 11: Architectural and Topographical Installation Plans and Diagrams-IEC 617-11: 1996; Supersedes BS 3939: Part 11: 1985;

BSI BS EN 60617- 12

Graphical Symbols for Diagrams - Part 12: Binary Logic Elements- Supersedes BS 3939: Part 12: 1991; IEC 60617-12: 1997;

BSI BS EN 60617- 13 Graphical Symbols for Diagrams Part 13: Analogue Elements (IEC 617- 13: 1993)

BSI BS EN 60617- 2

Graphical Symbols for Diagrams Part 2: Symbol Elements, Qualifying Symbols and Other Symbols Having General Application-Supersedes BS 3939: Part 2: 1985; IEC 617-2: 1996

BSI BS EN 60617- 3

Graphical Symbols for Diagrams Part 3: Conductors and Connecting Devices-Replaces BS 3939: Part 3: 1985; IEC 617-3: 1996

BSI BS EN 60617- 4 Graphical Symbols for Diagrams Part 4: Basic Passive Components (IEC 617-4: 1996)) (G)

BSI BS EN 60617- 5

Graphical Symbols for Diagrams Part 5: Semiconductors and Electron Tubes-Replaces BS 3939: Part 5: 1985; IEC 617-5: 1996

BSI BS EN 60617- 6

Graphical Symbols for Diagrams Part 6: Production and Conversion of Electrical Energy-Replaces BS 3939: Part 6: 1985; IEC 617-6: 1996

BSI BS EN 60617- 7

Graphical Symbols for Diagrams Part 7: Switchgear, Controlgear and Protective Devices-Replaces BS 3939: Part 7: 1985; IEC 617-7: 1996

BSI BS EN 60617- 8

Graphical Symbols for Diagrams Part: 8 Measuring Instruments, Lamps and Signalling Devices-Replaces BS 3939: Part 8: 1985; IEC 617-8: 1996

BSI BS EN 60617- 9

Graphical Symbols for Diagrams Part 9: Telecommunications: Switching and Peripheral Equipment-Replaces BS 3939: Part 9: 1985; IEC 617-9: 1996

BSI BS EN 60695-2- 11

Fire Hazard Testing - Part 2-11: Glowing/Hot-Wire Based Test Methods - Glow-Wire Flammability Test Method for End-Products-Supersedes BS EN 60695-2- 1/1:1997

BSI BS EN 61082- 1

Preparation of Documents Used in Electrotechnology - Part 1: General Requirements-AMD 8882: December, 1995; AMD 9422; April 15, 1997; Partially Supersedes BS 5070: Part 1: 1988

BSI BS EN 61082- 2 Preparation of documents used in electrotechnology Part 2: Function- oriented diagrams

BSI BS EN 82045- 1 Document Management Part 1: Principles and Methods

BSI BS EN 980 Graphical Symbols for Use in the Labelling of Medical Devices

BSI BS EN ISO 10012

Measurement management systems Requirements for measurement processes and measuring equipment-CORR 14611: August 4, 2003; Supersedes BS EN 30012-1:1994 and BS ISO 10012-2:1997;

BSI BS EN ISO 10209- 2

Technical Product Documentation - Vocabulary Part 2: Terms Relating to Projection Methods (G)

BSI BS EN ISO 11064- 1 Ergonomic Design of Control Centres - Part 1: Principles for the Design of Control Centres

BSI BS EN ISO 11064- 2

Ergonomic Design of Control Centres - Part 2: Principles for the Arrangement of Control Suites

BSI BS EN ISO 11064- 3

Ergonomic Design of Control Centres - Part 3: Control Room Layout- CORR 12057: November 2000;

BSI BS EN ISO 11091 Construction Drawings - Landscape Drawing Practice-Supersedes BS 1192-4:1984;

BSI BS EN ISO 128- 20

Technical Drawings - General Principles of Presentation - Part 20: Basic Conventions for Lines-AMD 13522: April 24, 2002; Renumbers BS ISO 128-20: 1996; Supersedes BS 308-1: 1993, BS 308-2: 1985 and BS 308-3: 1990;

BSI BS EN ISO 128- 21

Technical Drawings - General Principles of Presentation - Part 21: Preparation of Lines by CAD Systems-AMD 13521: 4/24/2002; Renumbers BS ISO 128-21: 1997

BSI BS EN ISO 1302

Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product Documentation-Supersedes BS ISO 1302: 1992; ISO 1302: 2002;

BSI BS EN ISO 13485 Medical devices Quality management systems Requirements for regulatory purposes

BSI BS EN ISO 13628- 1

Petroleum and natural gas industries Design and operation of subsea production systems Part 1: General requirements and recommendations

BSI BS EN ISO 13628- 2

Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 2: Flexible Pipe Systems for Subsea and Marine Applications- CORR 13971: June 18, 2002;

BSI BS EN ISO 13628- 3

Petroleum and natural gas industries Design and operation of subsea production systems Part 3: Through flowline (TFL) systems-CORR 14378: February 21, 2003;

BSI BS EN ISO 13628- 4

Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 4: Subsea Wellhead and Tree Equipment

BSI BS EN ISO 13943 Fire Safety - Vocabulary

BSI BS EN ISO 14021

Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)-AMD 13493: 11/2/2001; Renumbers BS ISO 14021:1999;

BSI BS EN ISO 14024

Environmental Labels and Declarations - Type I Environmental Labelling - Principles and Procedures-AMD 13492 November 2, 2001; Renumbers BS ISO 14024:1999

BSI BS EN ISO 14031 Environmental Management - Environmental Performance Evaluation - Guidelines

BSI BS EN ISO 14040 Environmental Management - Life Cycle Assessment - Principles and Framework

BSI BS EN ISO 14041

Environmental Management - Life Cycle Assessment - Goal and Scope Definition and Inventory Analysis

BSI BS EN ISO 14042 Environmental Management - Life Cycle Assessment - Life Cycle Impact Assessment

BSI BS EN ISO 14043 Environmental Management - Life Cycle Assessment - Life Cycle Interpretation

BSI BS EN ISO 14660- 1

Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions-Together with BS 8888 and other implemented European and International Standards listed in annexes A and B of BS 8888, supersedes all parts of BS 30

BSI BS EN ISO 1660

Technical Drawings - Dimensioning and Tolerancing of Profiles (Also Numbered BS 308: Part 2: Section 2.3: 1995 Partially Replaces BS 308: Part 2: 1985) (G)

BSI BS EN ISO 19011

Guidelines for quality and/or environmental management systems auditing-CORR 14237: November 12, 2002; Supersedes BS EN 30011-1:1993, BS EN 30011- 2:1993, BS EN 30011-3:1993, BS EN ISO 14010:1996, BS EN ISO 14011:1996 and BS EN ISO 14012:1996

BSI BS EN ISO 2203

Technical Drawing - Conventional Representation of Gears-Also Known as BS 308: Section 1.16: 1997; Partially Supersedes BS 308: Part 1: 1993;

BSI BS EN ISO 3059

Non-Destructive Testing - Penetrant Testing and Magnetic Particle Testing - Viewing Conditions-ISO 3059: 2001; Supersedes BS 4489:1984;

BSI BS EN ISO 3098- 0 Technical Product Documentation - Lettering Part 0: General Requirements

BSI BS EN ISO 3098- 5

Technical Product Documentation - Lettering Part 5: CAD Lettering of the Latin Alphabet, Numerals and Marks

BSI BS EN ISO 3166- 1

Code for the Representation of Names of Countries and Their Subdivisions Part 1: Country Codes-Supersedes BS EN 23166: 1994;

BSI BS EN ISO 3766

Construction drawings Simplified representation of concrete reinforcement-CORR 15521:February 14, 2005; Supersedes BS EN ISO 4066:2000

BSI BS EN ISO 4157- 1

Construction Drawings - Designation Systems - Part 1: Buildings and Parts of Buildings-This Standard Together with BS EN ISO 8560:1999; BS EN ISO 4157-1 Thru BS EN ISO 4157-3:1999; BS EN ISO 6284:1999 and BS EN ISO 9431:1999 Supersedes BS 1192-1:1984 w

BSI BS EN ISO 4157- 2

Construction Drawings - Designation Systems - Part 2: Room Names and Numbers-This Standard Together with BS EN ISO 8560:1999; BS EN ISO 4157-1 thru 4157- 3:1999; BS EN ISO 6284:1999 and BS EN ISO 9431:1999 Supersedes BS 1192- 1:1984;

BSI BS EN ISO 4288

Geometric Product Specification (GPS) - Surface Texture - Profile Method: Rules and Procedures for the Assessment of Surface Texture-AMD 9918: 3/1998; Renumbers BS ISO 4288: 1997

BSI BS EN ISO 4759- 1

Tolerances for Fasteners - Part 1: Bolts, Screws, Studs and Nuts - Product Grades A, B and C-Supersedes BS 6322-1:1982;

BSI BS EN ISO 5455

Technical Drawings - Scales (Also Numbered BS 308: Section 1.4: 1995. Partially Replaces BS 308: Part 1: 1993) (G)

BSI BS EN ISO 5456- 2 Technical drawings Projection methods Part 2: Orthographic representations

BSI BS EN ISO 5457

Technical Product Documentation - Sizes and Layout of Drawing Sheets-Supersedes BS 3429: 1984;

BSI BS EN ISO 5845- 1

Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 1: General Principles

BSI BS EN ISO 6284

Construction Drawings - Indication of Limit Deviations-Together with BS EN ISO 4157-1: 1999, BS EN ISO 4157-2: 1999, BS EN ISO 4157-3: 1999, BS EN ISO 8560: 1999 and BS EN ISO 9431: 1999, It Supersedes BS 1192-1: 1984 which is Withdrawn;

BSI BS EN ISO 6410- 1 Technical Drawings - Screw Threads and Threaded Parts Part 1: General Conventions (G)

BSI BS EN ISO 6410- 2 Technical Drawings - Screw Threads and Threaded Parts Part 2: Screw Thread Inserts (G)

BSI BS EN ISO 6410- 3

Technical Drawings - Screw Threads and Threaded Parts Part 3: Simplified Representation (G)

BSI BS EN ISO 6412- 1

Technical Drawings - Simplified Representation of Pipelines Part 1: General Rules and Orthogonal Representation-Also Numbered BS 308: Section 4.6: 1995;

BSI BS EN ISO 6412- 2

Technical Drawings - Simplified Representation of Pipelines Part 2: Isometric Projection (Also Numbered BS 308: Section 4.7) (G)

BSI BS EN ISO 6433

Technical Drawings - Item References (Also Numbered BS 308: Section 1.8: 1995. Partially Replaces BS 308: Part 1: 1993) (G)

BSI BS EN ISO 7083

Technical Drawings - Symbols for Geometrical Tolerancing Proportions and Dimensions-Also Numbered BS 308: Section 3.6: 1995; Partially Replaces BS 308: Part 3: 1990;

BSI BS EN ISO 7200

Technical product documentation Data fields in title blocks and document headers-Supersedes BS ISO 7200:1984

BSI BS EN ISO 7250 Basic Human Body Measurements for Technological Design

BSI BS EN ISO 7519

Technical Drawings - Construction Drawings - General Pricnciples of Presentation for General Arrangement and Assembly Drawings

BSI BS EN ISO 780 Packaging - Pictorial Marking for Handling of Goods-Supersedes BS EN 20780: 1993;

BSI BS EN ISO 8402

Quality Management and Quality Assurance - Vocabulary-Superseded by BS EN ISO 9000: 2000; Supersedes BS 4778: Part 1: 1987;

BSI BS EN ISO 9000

Quality management systems - Fundamentals and vocabulary- Supersedes BS EN ISO 8402: 1995;

BSI BS EN ISO 9000 Quality management systems - Fundamentals and vocabulary

BSI BS EN ISO 9000- 1

Quality Management and Quality Assurance Standards Part 1: Guidelines for Selection and Use (G)

BSI BS EN ISO 9001

Quality Management Systems - Requirements-Supersedes BS EN ISO 9002:1994 and BS EN ISO 9003:1994;

BSI BS EN ISO 9003

Quality Systems Model for Quality Assurance in Final Inspection and Test (See Also BS 5750. Replaces BS 5750: Part 3: 1987) (G)-Superseded by BS EN ISO 9001:2000

BSI BS EN ISO 9004

Quality management systems - Guidelines for performance improvements-Supersedes BS EN ISO 9004-1: 1994;

BSI BS EN ISO 9431

Construction Drawings - Spaces for Drawing and for Text, and Title Blocks on Drawing Sheets-This Standard Together with BS EN ISO 4157-1:1999,BS EN ISO 4157-2:1999, BS EN ISO 4157-3:1999, BS EN ISO 6284:1999 and BS EN ISO 8560:1999 Supersedes BS 1192-1

BSI BS EN ISO/IEC 17000

Conformity assessment Vocabulary and general principles-Partially Supersedes BS EN 45020:1998

BSI BS EN Conformity assessment General requirements for accreditation bodies accrediting

ISO/IEC 17011 conformity assessment bodies-Supersedes BS EN 45003:1995, BS EN 45010:1998 and PD 6642:1999

BSI BS EN ISO/IEC 17020

General criteria for the operation of various types of bodies performing inspection-Supersedes BS EN 45004:1995

BSI BS EN ISO/IEC 17024

Conformity assessment - General requirements for bodies operating certification of persons-Supersedes BS 7513: 1989;

BSI BS EN ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories

BSI BS EN ISO/IEC 17050-1

Conformity assessment Supplier s declaration of conformity Part 1: General requirements-Together with BS EN ISO/IEC 17050-2:2004 Supersedes BS EN 45014:1998

BSI BS EN ISO/IEC 17050-2

Conformity assessment Supplier s declaration of conformity Part 2: Supporting documentation-Together with BS EN ISO/IEC 17050-1:2004 supersedes BS EN 45014:1998

BSI BS IEC 60050(411)

International Electrotechnical Vocabulary Chapter 411: Rotating Machines-IEC 60050(411): 1996;

BSI BS IEC 60050- 101

International Electrotechnical Vocabulary - Part 101: Mathematics- Partially Supersedes BS 4727-1: Group 1: 1983

BSI BS IEC 60050- 195

International Electrotechnical Vocabulary - Chapter 195: Earthing and Protection Against Electric Shock

BSI BS IEC 60050- 351 International Electrotechnical Vocabulary - Chapter 351: Automatic Control

BSI BS IEC 60050- 651 International Electrotechnical Vocabulary - Part 651: Live Working

BSI BS IEC 60300-3- 10

Dependability Management - Part 3-10: Application Guide - Maintainability-Supersedes BS 6548-1: 1984 Sections 1 and 3;

BSI BS IEC 60300-3- 5

Dependability Management - Part 3-5: Application Guide - Reliability Test Conditions and Statistical Test Principles-Supersedes BS 5760-10.1:1993;

BSI BS IEC 61831 On-Line Analyser Systems - Guide to Design and Installation

BSI BS IEC 62198 Project Risk Management - Application Guidelines

BSI BS ISO SI units and recommendations for the use of their multiples and of certain other units-

1000 Supersedes BS 5555:1993

BSI BS ISO 10002

Quality management Customer satisfaction Guidelines for complaints handling in organizations-Supersedes BS 8600:1999

BSI BS ISO 10005 Quality management systems Guidelines for quality plans

BSI BS ISO 10006 Quality management systems Guidelines for quality management in projects

BSI BS ISO 10007

Quality Management - Guidelines for Configuration Management- Supersedes BS EN ISO 10007:1997;

BSI BS ISO 10015 Quality Management - Guidelines for Training

BSI BS ISO 10019

Guidelines for the selection of quality management system consultants and use of their services

BSI BS ISO 10209- 1

Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of Drawings

BSI BS ISO 10578

Technical drawings Tolerancing of orientation and location Projected tolerance zone-Together with BS 8888 and other implemented European and International Standards listed in Annexes A and B of BS 8888, supersedes all parts of BS 308;

BSI BS ISO 10579

Technical drawings Dimensioning and tolerancing Non-rigid parts- Together with BS 8888 and other implemented European and International Standards listed in Annexes A and B of BS 8888, supersedes all parts of BS 308;

BSI BS ISO 1219- 2

Fluid Power Systems and Components - Graphic Symbols and Circuit Diagrams Part 2: Circuit Diagrams (G)

BSI BS ISO 128Technical Drawings - General Principles of Presentation-Supersedes all Parts of BS 308; Partially Superseded by BS ISO 128-30:2001, BS ISO 128-40:2001, BS ISO 128-44:2001, BS ISO 128-50:2001

BSI BS ISO 128- 22

Technical drawings General principles of presentation Part 22: Basic conventions and applications for leader lines and reference lines-Together with BS 8888 and other implemented European and International Standards listed in Annex A and Annex B of B

BSI BS ISO 128- 23

Technical Drawings - General Principles of Presentation - Part 23: Lines on Construction Drawings

BSI BS ISO 128- 24

Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawings-Together with BS 8888 and other Standards listed in annexes A and B of BS 8888, supersedes all parts of BS 308;

BSI BS ISO 128- 25

Technical Drawings - General Principles of Presentation - Part 25: Lines on Shipbuilding Drawings-This BS Reproduces Verbatim ISO 128-25:1999 and Implements it as the UK National Standard. Together with BS 8888 and Other Implemented European Standards

BSI BS ISO 128- 30

Technical drawings - General principles of presentation Part 30: Basic conventions for views-Partially Supersedes BS ISO 128:1982

BSI BS ISO 128- 34

Technical Drawings - General Principles of Presentation - Part 34: Views on Mechanical Engineering Drawings-CORR 13323:September 2001;

BSI BS ISO 128- 40

Technical Drawings - General Principles of Presentation - Part 40: Basic Conventions for Cuts and Sections-Partially Supersedes BS ISO 128:1982

BSI BS ISO 128- 44

Technical Drawings - General Principles of Presentation - Part 44: Sections on Mechanical Engineering Drawings-Partially Supersedes BS ISO 128:1982

BSI BS ISO 128- 50

Technical Drawings - General Principles of Presentation - Part 50: Basic Conventions for Representing Areas on Cuts and Sections-Partially Supersedes BS ISO 128:1982

BSI BS ISO 129- 1

Technical drawings Indication of dimensions and tolerances Part 1: General principles-Supersedes BS ISO 129:1985

BSI BS ISO 13715 Technical drawings Edges of undefined shape Vocabulary and indications

BSI BS ISO 13879 Petroleum and Natural Gas Industries - Content and Drafting of Functional Specifications

BSI BS ISO 13880 Petroleum and Natural Gas Industries - Content and Drafting of a Technical Specification

BSI BS ISO 14015

Environmental Management - Environmental Assessment of Sites and Organizations (EASO)

BSI BS ISO 14050 Environmental Management - Vocabulary

BSI BS ISO 14617- 1 Graphical symbols for diagrams Part 1: General information and indexes

BSI BS ISO 14617- 2 Graphical symbols for diagrams Part 2: Symbols having general application

BSI BS ISO 14617- 5 Graphical symbols for diagrams Part 5: Measurement and control devices

BSI BS ISO 14617- 8 Graphical symbols for diagrams Part 8: Valves and dampers

BSI BS ISO 15489- 1 Information and Documentation - Records Management - Part 1: General

BSI BS ISO 16269- 6

Statistical interpretation of data Part 6: Determination of statistical tolerance intervals-Supersedes BS 2846-3:1975

BSI BS ISO 18436- 2

Condition monitoring and diagnostics of machines Requirements for training and certification of personnel Part 2: Vibration condition monitoring and diagnostics

BSI BS ISO 1925 Mechanical Vibration - Balancing - Vocabulary-Supersedes BS 3851:1990;

BSI BS ISO 2692

Technical drawings Geometrical tolerancing Maximum material principle (including Amendment 1:1992 Least material requirement)-Together with BS 8888 and other implemented European and International Standards listed in annexes A and B of BS 8888, super

BSI BS ISO 31- 0 Quantities and units Part 0: General principles-Supersedes BS 5775- 0:1993

BSI BS ISO 3166- 2

Codes for the Representation of Names of Countries and Their Subdivisions - Part 2: Country Subdivision Code

BSI BS ISO 3534- 1 Statistics - Vocabulary and Symbols - Part 1: Probability and General Statistical Terms (G)

BSI BS ISO 3534- 2 Statistics - Vocabulary and Symbols - Part 2: Statistical Quality Control (G)

BSI BS ISO 3534- 3 Statistics - Vocabulary and Symbols - Part 3: Design of Experiments

BSI BS ISO 406Technical drawings Tolerancing of linear and angular dimensions- Together with BS 8888 and other implemented European and International Standards listed in Annex A and Annex B of BS 8888, supersedes all parts of BS 308;

BSI BS ISO 5459

Technical drawings Geometrical tolerancing Datums and datum- systems for geometrical tolerances-Together with BS 8888 and other implemented European and International Standards listed in Annexes A and B of BS 8888, supersedes all parts of BS 308;

BSI BS ISO 5725- 1

Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 1: General Principles and Definitions-CORR 10554; March 2000; Implementation of ISO 5725-1: 1994;

BSI BS ISO 5725- 4

Accuracy (Trueness and Precision) of Measurement Methods and Results Part 4: Basic Methods for the Determination of the Trueness of a Standard Measurement Method (G)

BSI BS ISO 5725- 5

Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 5: Alternative Methods for the Determination of the Precision of a Standard Measurement Method-Supersedes BS 5497-1: 1987;

BSI BS ISO 5725- 6

Accuracy (Trueness and Precision) of Measurement Methods and Results Part 6: Use in Practice of Accuracy Values-CORR 13574; MAY 09, 2002; Parts 1 to 6 of BS ISO 5725 Together Supersede BS 5497-1: 1987

BSI BS ISO 6336- 1

Corr.1 Calculation of Load Capacity of Spur and Helical Gears Part 1: Basic Principles, Introduction and General Influence Factors-CORR 10404; May 15, 1999; ISO 6336-1: 1996;

BSI BS ISO 639- 1 Codes for the Representation of Names of Languages Part 1: Alpha-2 Code

BSI BS ISO 7000 Graphical symbols for use on equipment Index and synopsis- Supersedes BS 7324:1990;

BSI BS ISO 9000- 2

Quality Management and Quality Assurance Standards - Part 2: Generic Guidelines for the Application of ISO 9001, ISO 9002 and ISO 9003-Supersedes BS 5750 : Part 4: 1994;

BSI BS ISO/TR 13387- 2 Fire Safety Engineering - Part 2: Design Fire Scenarios and Design Fires

BSI BS ISO/TR 13387- 7 Fire Safety Engineering - Part 7: Detection, Activation and Suppression

BSI PAS 56 Guide to Business Continuity Management

BSI PD 3542 Standards and quality management - An integrated approach-CORR 10467: April 1999;

BSI PD 6433 Guide to the Application of Stress Analysis to Design

BSI PD 6484 Commentary on Corrosion at Bimetallic Contact and Its Alleviation

BSI PD 6614 Obsolescence Management - Guide to the Substitution of Components in Electronic Equipment

BSI PD 7505 Skills for Knowledge Working: A Guide to Good Practice

BSI PD 8888 Technical Product Documentation (TPD) - An Interim Report

BSI PD ISO/IEC GUIDE 28 Conformity assessment Guidance on a third-party certification system for products

BSI PD ISO/IEC GUIDE 71

Guidelines for Standards Developers to Address the Needs of Older Persons and Persons with Disabilities-ISO/IEC Guide 71:2001;

BSI PD ISO/IEC GUIDE 73 Risk Management - Vocabulary - Guidelines for Use in Standards

BSI PD ISO/TR Guidelines for Quality Management System Documentation-ISO/TR 10013:2001;

10013 Supersedes BS ISO 10013:1995;

BSI PD ISO/TR 10014 Guidelines for Managing the Economics of Quality

BSI PD ISO/TR 10017 Guidance on Statistical Techniques for ISO 9001:2000

BSI PD ISO/TR 14049

Environmental Management - Life Cycle Assessment - Examples of Application of ISO 14041 to Goal and Scope Definition and Inventory Analysis-ISO/TR 14049: 2000;

BSI PD ISO/TR 14969

Medical devices Quality management systems Guidance on the application of ISO 13485:2003

BSI PD ISO/TR 15489- 2 Information and Documentation - Records Management - Part 2: Guidelines

BSI PD ISO/TS 16949

Quality Management Systems - Particular Requirements for the Application of ISO 9001: 2000 for Automotive Production and Relevant Service Part Organizations

BSI PP 7312 Extracts from British Standards for Students of Structural Design-5th Edition

BSI - HEALTH AND SAFETY COLLECTIONPopular Standards from this Collection.

BSI BS 10175 Investigation of Potentially Contaminated Sites - Code of Practice- Supersedes DD 175:1988;

BSI BS 1747- 1 Methods for the Measurement of Air Pollution Part 1: Deposit Gauges

BSI BS 1747- 3 Methods for the Measurement of Air Pollution Part 3: Determination of Sulphur Dioxide

BSI BS 2745 PART 2

Washer-Disinfectors for Medical Purposes Part 2: Specification for Human Waste Container Washer-Disinfectors (AMD 8256) October 15, 1994 (N)-Amd 1;

BSI BS 3169 First Aid Reel Hoses for Fire Fighting Purposes-Partially superseded by BS EN 1947:2002

BSI BS 336 Fire Hose Couplings and Ancillary Equipment

BSI BS 3405 Measurement of Particulate Emission Including Grit and Dust (Simplified Method)

BSI BS 3521 PART 1

Terms Relating to Ophthalmic Optics and Spectacle Frames Part 1: Glossary of Terms Relating to Ophthalmic Lenses-Supersedes BS 3521 PARTS 1&2:1962

BSI BS 3521 PART 2

Terms Relating to Ophthalmic Optics and Spectacle Frames Part 2: Glossary of Terms Relating to Spectacle Frames (AMD 9203) August 15, 1996 (N)-Amd 1; Supersedes BS 3521 PARTS 1&2:1962

BSI BS 4001- 1

Care and Maintenance of Underwater Breathing Apparatus - Part 1: Recommendations for the Compressed Air Open Circuit Type-Superseded by BS EN 12021

BSI BS 4094 PART 1

Recommendations for Data on Shielding from Ionizing Radiation Part 1: Shielding from Gamma Radiation

BSI BS 4094 PART 2

Recommendations for Data on Shielding from Ionizing Radiation Part 2: Shielding from X-Radiation

BSI BS 4142 Method for Rating Industrial Noise Affecting Mixed Residential and Industrial Areas

BSI BS 4163 Health and Safety for Design and Technology in Schools and Similar Establishments - Code of Practice-Corr 1; Corr 11025 July 2000

BSI BS 5330 Method of Test for Estimating the Risk of Hearing Handicap Due to Noise Exposure

BSI BS 5378- 2

Safety Signs and Colours - Part 2: Specification for Colorimetric and Photometric Properties of Materials-AMD 5484: August 1987; Reprinted, Incorporating Amendments Nos. 1 and 2;

BSI BS 5446- 1

Fire detection and fire alarm devices for dwellings Part 1: Specification for smoke alarms-AMD 15397:May 11, 2005

BSI BS 5682 Probes (Quick Connectors) For Use with Medical Gas Pipeline Systems-AMD 13101: June 2001; Together with BS EN 737-1:1998 and BS EN 739:1998, it Supersedes BS 5682: 1984;

BSI BS 5906 Waste management in buildings Code of practice

BSI BS 6068- 1.2

Water Quality Part 1: Glossary Section 1.2: Additional Terms Relating to Types of Water, and Treatment and Storage of Water and Waste Water, and Terms Used in Sampling and Analysis of Water-Supersedes BS 6068: SEC 1.2: 1990; ISO 6107-2: 1997;

BSI BS 6069 PART 1 Characterization of Air Quality Part 1: Units of Measurement (ISO 4226: 1993) (N)

BSI BS 6391 Non-Percolating Layflat Delivery Hoses and Hose Assemblies for Fire Fighting Purposes (AMD 5209) September 30, 1986-Amd 1;

BSI BS 6440 Powered Lifting Platforms for Use by Disabled Persons - Code of Practice-AMD 10960 May 2000;

BSI BS 6643 PART 1

Recharging Fire Extinguishers (Manufactured to BS 5423 Specification for Portable Fire Extinguishers) Part 1: Specification for Procedure and Materials (AMD 7740) September 15, 1993 (N)-Amd 3;

BSI BS 6643 PART 2

Recharging Fire Extinguishers (Manufactured to BS 5423 Specification for Portable Fire Extinguishers) Part 2: Specification for Powder Refill Charges (AMD 7741) September 15, 1993 (N)-Amd 2;

BSI BS 6658 Specification for Protective helmets for vehicle users-AMD 5128: February, 1986; AMD 15925: October, 2005

BSI BS 6841 Measurement and Evaluation of Human Exposure to Whole-Body Mechanical Vibration and Repeated Shock

BSI BS 6920- 1

Suitability of Non-Metallic Products for Use in Contact with Water Intended for Human Consumption with Regard to Their Effect on the Quality of the Water - Part 1: Specification-AMD 14717: January 21, 2004; AMD 15475: March 31, 2005

BSI BS 7028 Eye-Protection for Industrial and Other Uses - Guidance on Selection, Use and Maintenance

BSI BS 7244 Flame Arresters for General Use-Partially Superseded by BS EN 12874: 2001

BSI BS 7262 Automatic Safe Load Indicators

BSI BS 7346- 5

Components for smoke and heat control systems Part 5: Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires Code of practice

BSI BS 7346- 6 Components for smoke and heat control systems Part 6: Specifications for cable systems

BSI BS 750 Specification for underground fire hydrants and surface box frames and covers-AMD 7658: June 1993; AMD 10434: April 1999; AMD 14520: July 8, 2004; CORR 15667: August 24, 2005

BSI BS 7629- 1

Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire Part 1: Multicore cables-AMD 14198: January 30, 2004; AMD 15654: April 29, 2005; Supersedes BS 7629: 1993

BSI BS 7867 Portable Fire Extinguishers for Use in Aircraft-Together with BS EN 3, Part 1 thru Part 6 and BS 7867) it supersedes BS 5423 : 1987

BSI BS 7883 Code of practice for the design, selection, installation, use and maintenance of anchor devices conforming to BS EN 795

BSI BS 7899 PART 1

Code of Practice for Assessment of Hazard to Life and Health from Fire Part 1: General Guidance

BSI BS 7899- 2

Code of Practice for Assessment of Hazard to Life and Health from Fire - Part 2: Guidance on Methods for the Quantification of Hazards to Life and Health and Estimation of Time to Incapacitation and Death in Fires-Together with Parts 1 and 3, It Supers

BSI BS 7915 Ergonomics of the Thermal Environment - Guide to Design and Evaluation of Working

Practices for Cold Indoor Environments

BSI BS 7944 Type 1 Heavy Duty Fire Blankets and Type 2 Heavy Duty Heat Protective Blankets-Supersedes BS 6575: 1985;

BSI BS 8436Electric cables 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids Multicore cables-AMD 15659: April 29, 2005

BSI BS 8437 Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

BSI BS 8555Environmental management systems - Guide to the phased implementation of an environmental management system including the use of environmental performance evaluation

BSI BS 9251 Sprinkler systems for residential and domestic occupancies Code of practice-Supersedes DD 251:2000

BSI BS EN 1005- 4

Safety of machinery Human physical performance Part 4: Evaluation of working postures and movements in relation to machinery

BSI BS EN 1028- 1

Fire-Fighting Pumps Fire-Fighting Centrifugal Pumps with Primer Part 1: Classification General and Safety Requirements

BSI BS EN 1028- 2

Fire-Fighting Pumps Fire-Fighting Centrifugal Pumps with Primer Part 2: Verification of General and Safety Requirements

BSI BS EN 1041 Information Supplied by the Manufacturer with Medical Devices

BSI BS EN 1060- 1

Non-invasive sphygmomanometers - Part 1: General requirements-AMD 13881: October 8, 2002; Supersedes BS 2743: 1990

BSI BS EN 1060- 3

Non-Invasive Sphygmomanometers Part 3: Supplementary Requirements for Electro-Mechanical Blood Pressure Measuring Systems

BSI BS EN 1146

Respiratory Protective Devices for Self-Rescue - Self-Contained Open- Circuit Compressed Air Breathing Apparatus Incorporating a Hood (Compressed Air Escape Apparatus with Hood) - Requirements, Testing, Marking-AMD 13349: December 21, 2001; Supersedes B

BSI BS EN 1149- 1

Protective Clothing - Electrostatic Properties Part 1: Surface Resistivity (Test Methods and Requirements) (N)

BSI BS EN 1149- 3

Protective clothing Electrostatic properties Part 3: Test methods for measurement of charge decay

BSI BS EN Sterilization of Medical Devices - Estimation of the Population of Micro- Organisms on Product

1174- 1 Part 1: Requirements

BSI BS EN 1174- 2

Sterilization of Medical Devices - Estimation of the Population of Micro- Organisms on Product Part 2: Guidance

BSI BS EN 1174- 3

Sterilization of Medical Devices - Estimation of the Population of Micro- Organisms on Product Part 3: Guide to the Methods for Validation of Microbiological Techniques

BSI BS EN 12006- 2

Non-Active Surgical Implants - Particular Requirements for Cardiac and Vascular Implants - Part 2: Vascular Prostheses Including Cardiac Valve Conduits

BSI BS EN 12006- 3

Non-Active Surgical Implants - Particular Requirements for Cardiac and Vascular Implants - Part 3: Endovascular Devices

BSI BS EN 12011

Instrumentation to be Used in Association with Non-Active Surgical Implants - General Requirements

BSI BS EN 12021

Corr.1 Respiratory Protective Devices - Compressed Air for Breathing Apparatus-CORR 10517; April 15, 1999; Supersedes BS 4001-1:1998

BSI BS EN 12101- 6

Smoke and heat control systems Part 6: Specification for pressure differential systems Kits-Supersedes BS 5588-4:1998

BSI BS EN 1211

Chemicals used for treatment of water intended for human consumption Potassium tripolyphosphate

BSI BS EN 12255- 1 Wastewater Treatment Plants - Part 1: General Construction Principles

BSI BS EN 12255- 8

Wastewater Treatment Plants - Part 8: Sludge Treatment and Storage- CORR 15294: December 13, 2004

BSI BS EN 12442- 1

Animal Tissues and Their Derivatives Utilized in the Manufacture of Medical Devices - Part 1: Analysis and Management of Risk

BSI BS EN 12457- 3

Characterisation of waste Leaching Compliance test for leaching of granular waste materials and sludges Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)

BSI BS EN 12470- 4

Clinical Thermometers - Part 4: Performance of Electrical Thermometers for Continuous Measurement

BSI BS EN 12473 General Principles of Cathodic Protection in Sea Water-BS 7361: PART 1:1991;

BSI BS EN 1263- 1 Safety Nets Part 1: Safety Requirements, Test Methods

BSI BS EN 132 Respiratory Protective Devices - Definitions of Terms and Pictograms

BSI BS EN 13463- 2

Non-electrical equipment for use in potentially explosive atmospheres Part 2: Protection by flow restricting enclosure fr

BSI BS EN 13463- 6

Non-electrical equipment for use in potentially explosive atmospheres Part 6: Protection by control of ignition source b

BSI BS EN 136

Respiratory Protective Devices - Full Face Masks - Requirements, Testing, Marking-CORR 14996: 6/4/2004; Supersedes BS 7355: 1990 and BS EN 136-10: 1992

BSI BS EN 13612

Performance evaluation of in vitro diagnostic medical devices-CORR 14302: February 27, 2003;

BSI BS EN 1363- 1 Fire Resistance Tests - Part 1: General Requirements

BSI BS EN 1363- 2 Fire Resistance Tests - Part 2: Alternative and Additional Procedures

BSI BS EN 13641 Elimination or Reduction of Risk of Infection Related to In Vitro Diagnostic Reagents

BSI BS EN 1366- 2 Fire Resistance Tests for Service Installations - Part 2: Fire Dampers

BSI BS EN 137

Respiratory Protective Devices: Self-Contained Open-Circuit Compressed Air Breathing Apparatus-AMD 8167: May 15, 1994; Supersedes BS 7004: 1988;

BSI BS EN 13725 Air quality - Determination of odour concentration by dynamic olfactometry

BSI BS EN 13795- 1

Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment Part 1: General requirements for manufacturers, processors and products

BSI BS EN 13824 Sterilization of medical devices Aseptic processing of liquid medical devices Requirements

BSI BS EN 13868 Catheters - Test Methods for Kinking of Single Lumen Catheters and Medical Tubing

BSI BS EN 140

Respiratory Protective Devices - Half Masks and Quarter Masks - Requirements, Testing, Marking-Supersedes BS 7356: 1990;

BSI BS EN 14181 Stationary source emissions Quality assurance of automated measuring systems

BSI BS EN 142

Respiratory Protective Devices - Mouthpiece Assemblies - Requirements, Testing, Marking-Supersedes BS 7309:1990;

BSI BS EN 1422

Sterilizers for medical purposes Ethylene oxide sterilizers Requirements and test methods-CORR 14232: February 25, 2003; Partially Supersedes BS 3970-1: 1990;

BSI BS EN 14299

Non active surgical implants Particular requirements for cardiac and vascular implants Specific requirements for arterial stents

BSI BS EN 143

Respiratory protective devices Particle filters Requirements, testing, marking-CORR 14049: December 16, 2002;

BSI BS EN 144- 1

Respiratory protective devices Gas cylinder valves Part 1: Thread connections for insert connector-AMD 14484: August 20, 2003; AMD 15783: November 14, 2005

BSI BS EN 14605

Protective clothing against liquid chemicals Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])- Supersedes BS E

BSI BS EN 149

Respiratory Protective Devices - Filtering Half Masks to Protect Against Particles - Requirements, Testing, Marking-CORR 14080: January 23,2003;

BSI BS EN 1615

Enteral Feeding Catheters and Enteral Giving Sets for Single Use and Their Connectors - Design and Testing

BSI BS EN 1618 Catheters Other than Intravascular Catheters - Test Methods for Common Properties

BSI BS EN 165 Personal Eye-Protection - Vocabulary

BSI BS EN 166 Personal Eye-Protection - Specifications

BSI BS EN 168 Personal Eye-Protection - Non-Optical Test Methods

BSI BS EN 169

Personal eye-protection Filters for welding and related techniques Transmittance requirements and recommended use

BSI BS EN 1707

Conical Fittings with a 6% (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Lock Fittings-Supersedes BS 3930: Part 2:1991;

BSI BS EN 175

Personal Protection - Equipment for Eye and Face Protection During Welding and Allied Processes-AMD 9902: January 15, 1998; Supersedes BS 1542: 1982;

BSI BS EN 1810

Body-Piercing Post Assemblies - Reference Test Method for Determination of Nickel Content by Flame Atomic Absorption Spectrometry

BSI BS EN 1822- 1

High Efficiency Air Filters (HEPA and ULPA) - Part 1: Classification, Performance Testing, Marking

BSI BS EN 1822- 2

High Efficiency Air Filters (HEPA and ULPA) - Part 2: Aerosol Production, Measuring Equipment, Particle Counting Statistics

BSI BS EN 1822- 3 High Efficiency Air Filters (HEPA and ULPA) - Part 3: Testing Flat Sheet Filter Media

BSI BS EN 1822- 5

High Efficiency Particulate Air Filters (HEPA and ULPA) - Part 5: Determining the Efficiency of Filter Element

BSI BS EN 1825- 1

Grease separators Part 1: Principles of design, performance and testing, marking and quality control

BSI BS EN 1836

Personal eye protection Sunglasses, sunglare filters for general use and filters for direct observation of the sun-AMD 14887: December 16, 2003; Supersedes BS 2724: 1987;

BSI BS EN 1868 Personal Protective Equipment Against Falls from a Height - List of Equivalent Terms

BSI BS EN 1869 Fire Blankets

BSI BS EN 1993-1- 2

Eurocode 3: Design of steel structures Part 1-2: General rules Structural fire design-Supersedes DD ENV 1993-1-2:2001

BSI BS EN 2 Classification of Fires

BSI BS EN 20594- 1

Conical Fittings with 6% (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment Part 1: General Requirements-AMD 9881: March 15, 1998; ISO 594- 1: 1986; Supersedes BS 3930: 1965 and BS 5081: 1976;

BSI BS EN 207

Personal Eye-Protection - Filters and Eye-Protectors Against Laser Radiation (Laser Eye-Protectors)-AMD 14119: January 31, 2003; Corrigendum 15399: October 27, 2004

BSI BS EN 250

Respiratory Equipment - Open-Circuit Self-Contained Compressed Air Diving Apparatus - Requirements, Testing, Marking

BSI BS EN 285

Sterilization - Steam Sterilizers - Large Sterilizers-Supersedes BS 3970: Part 3: 1990 and the Current Provisions of BS 3970: Part 1: 1990, Which is Subject to Amendment;

BSI BS EN 29241- 3

Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 3: Visual Display Requirements-AMD 13606: April 8, 2005; Supersedes BS 7179-3:1990; ISO 9241-3:1992

BSI BS EN 30993- 6

Biological Evaluation of Medical Devices Part 6: Tests for Local Effects After Implantation (ISO 10993-6: 1994) (N)

BSI BS EN 3- 3

Portable Fire Extinguishers Part 3: Construction, Resistance to Pressure, Mechanical Tests (N)-BS 7863 together with BS EN 3, Part 1, 2, and 4 thru Part 6 and BS 7867) it supersedes BS 5423 : 1987

BSI BS EN 340 Protective Clothing - General Requirements

BSI BS EN 341

Personal Protective Equipment Against Falls From a Height - Descender Devices-AMD 9423 March 1997;

BSI BS EN 343 Protective clothing Protection against rain-Supersedes DD ENV 343:1998;

BSI BS EN 352- 1 Hearing protectors General requirements Part 1: Ear-Muffs

BSI BS EN 352- 2 Hearing protectors General requirements Part 2: Ear-plugs

BSI BS EN 353- 1

Personal protective equipment against falls from a height Part 1: Guided type fall arresters including a rigid anchor line-AMD 15198:February 16, 2005

BSI BS EN 353- 2

Personal Protective Equipment Against Falls from a Height - Part 2: Guided Type Fall Arresters Including a Flexible Anchor Line

BSI BS EN 354 Personal Protective Equipment Against Falls from a Height - Lanyards

BSI BS EN 355 Personal Protective Equipment Against Falls from a Height - Energy Absorbers

BSI BS EN 358

Personal Protective Equipment for Work Positioning and Prevention of Falls from a Height - Belts for Work Positioning and Restraint and Work Positioning Lanyards

BSI BS EN 3- 6

Portable Fire Extinguishers - Part 6: Provisions for the Attestation of Conformity of Portable Fire Extinguishers in Accordance with EN 3 Part 1 to Part 5-AMD 10494; September 1999; BS 7863 together with BS EN 3, Part 1 thru Part 5 and BS 7867) it supe

BSI BS EN 360 Personal Protective Equipment Against Falls from a Height - Retractable Type Fall Arresters

BSI BS EN 361 Personal Protective Equipment Against Falls from a Height - Full Body Harnesses

BSI BS EN 362 Personal Protective Equipment Against Falls from a Height - Connectors

BSI BS EN Personal Protective Equipment Against Falls from a Height - Fall Arrest Systems-CORR

363 14007: July 15, 2002;

BSI BS EN 364

Personal Protective Equipment Against Falls from a Height - Test Methods-AMD 8220: June 15, 1994; Supersedes BS 1397: 1979 and BS 5062: Part 1: 1985;

BSI BS EN 365

Personal protective equipment against falls from a height General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging

BSI BS EN 367

Protective Clothing - Protection Against Heat and Flames - Test Method: Determination of the Transmission on Exposure to Flame-AMD 7667: May 15, 1993; Supersedes BS 3791: 1970;

BSI BS EN 3- 7 Portable fire extinguishers Part 7: Characteristics, performance requirements and test methods

BSI BS EN 374- 1

Protective gloves against chemicals and micro-organisms Part 1: Terminology and performance requirements

BSI BS EN 388 Protective gloves against mechanical risks

BSI BS EN 393 Lifejackets and Personal Buoyancy Aids - Buoyancy Aids - 50 N-AMD 10066; November 1995;

BSI BS EN 396 Lifejackets and Personal Buoyancy Aids - Lifejackets - 150 N-AMD 10068; November 1998;

BSI BS EN 399 Lifejackets and Personal Buoyancy Aids - Lifejackets - 275 N-AMD 10067; November 1998;

BSI BS EN 403

Respiratory protective devices for self-rescue Filtering devices with hood for escape from fire Requirements, testing, marking

BSI BS EN 407 Protective gloves against thermal risks (heat and/or fire)

BSI BS EN 420 Protective gloves General requirements and test methods

BSI BS EN 45502- 1

Active Implantable Medical Devices Part 1: General Requirements for Safety, Marking and Information to be Provided by the Manufacturer

BSI BS EN 45502-2- 1

Active implantable medical devices Part 2-1: Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)- Supersedes BS 6902-1: 1990 and BS 6902-1: Supplement No 1: 1996;

BSI BS EN 455- 1 Medical Gloves for Single Use - Part 1: Requirements and Testing for Freedom from Holes

BSI BS EN 45544- 1

Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 1: General Requirements and Test Methods

BSI BS EN 458

Hearing protectors Recommendations for selection, use, care and maintenance Guidance document

BSI BS EN 470- 1

Protective Clothing for Use in Welding and Allied Processes Part 1: General Requirements-AMD 10318: February 15, 1999; Supersedes BS 2653: 1955;

BSI BS EN 471 High-visibility warning clothing for professional use Test methods and requirements

BSI BS EN 50371

Generic Standard to Demonstrate the Compliance of Low Power Electronic and Electrical Apparatus with the Basic Restrictions Related to Human Exposure to Electromagnetic Fields (10 MHz - 300 GHz) - General Public

BSI BS EN 531

Protective Clothing for Workers Exposed to Heat-AMD 10302; January 15, 1999; Together with BS EN 469, it Supersedes BS 1547: 1959;

BSI BS EN 533

Protective Clothing - Protection Against Heat and Flame - Limited Flame Spread Materials and Material Assemblies-Supersedes BS 6249: Part 1: 1982;

BSI BS EN 54- 13

Fire detection and fire alarm systems Part 13: Compatibility assessment of system components

BSI BS EN 550 Sterilization of Medical Devices - Validation and Routine Control of Ethylene Oxide Sterilization

BSI BS EN 552

Sterilization of Medical Devices - Validation and Routine Control of Sterilization by Irradiation-AMD 10623: September 1999; AMD 13085: June 2001

BSI BS EN 554 Sterilization of Medical Devices - Validation and Routine Control of Sterilization by Moist Heat

BSI BS EN 556- 1

Sterilization of Medical Devices - Requirements for Medical Devices to Be Designated "Sterile" - Part 1: Requirements for Terminally Sterilized Medical Devices

BSI BS EN 556- 2

Sterilization of medical devices Requirements for medical devices to be designated STERILE Part 2: Requirements for aseptically processed medical devices

BSI BS EN 60300-3- 3

Dependability management Part 3-3: Application guide Life cycle costing- Supersedes BS 5760-23:1997

BSI BS EN 60336

X-Ray Tube Assemblies for Medical Diagnosis Characteristics of Focal Spots-AMD 8835: October 15, 1995; Renumbers BS 6530:1994; IEC 336: 1993

BSI BS EN Medical Electrical Equipment Part 1: General Requirements for Safety- AMD 6715: December

60601- 1 1990; AMD 7940: November 1995; AMD 9693: October 1997; Renumbers BS 5724: Part 1: 1989

BSI BS EN 60601-1- 1

Medical Electrical Equipment - Part 1: General Requirements for Safety - Collateral Standard - Safety Requirements for Medical Electrical Systems-Also Known as BS 5724-1-1: 2001

BSI BS EN 60601-1- 2

Medical Electrical Equipment - Part 1-2: General Requirements for Safety - Collateral Standard: Electromagnetic Compatibility - Requirements and Tests-IEC 60601-1-2: 2001

BSI BS EN 60601-1- 3

Medical Electrical Equipment Part 1: General Requirements for Safety Section 1.3: Collateral Standard: General Requirements for Radiation Protection in Diagnostic X-Ray Equipment-Also Known as BS 5724: Section 1.3; IEC 601-1-3: 1994

BSI BS EN 60601-1- 4

Medical Electrical Equipment - Part 1-4: General Requirements for Safety - Collateral Standard: Programmable Electrical Medical Systems-AMD 13000: April 2001; Also Known as BS 5724-1.4:1997; IEC 60601-1-4:1996

BSI BS EN 60601-1- 6

Medical electrical equipment Part 1-6: General requirements for safety Collateral standard: Usability

BSI BS EN 60601-1- 8

Medical electrical equipment Part 1-8: General requirements for safety Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

BSI BS EN 60601-2- 1

Medical electrical equipment Part 2-1: Particular requirements for the safety of electron accelerators in the range 1 MeV to 50 MeV-AMD 14465: August 5, 2003; Supersedes BS 5724-2-1: 1989 and BS 5724-2-1-1: Supplement No. 1: 1991; Also Known as BS 572

BSI BS EN 60601-2- 10

Medical electrical equipment - Part 2.10: Particular requirements for the safety of nerve and muscle stimulators-AMD 14260: March 21, 2003; Renumbers BS 5724- 2.10: 1988;

BSI BS EN 60601-2- 16

Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Haemodialysis, Haemodiafiltration and Haemofiltration Equipment-CORR 10991: March 2001; Supersedes BS 5724-2-16: 1989; Also Known as BS 5724-2-16: 1998; IEC 60601-2-16: 19

BSI BS EN 60601-2- 18

Medical electrical equipment Part 2: Particular requirements for safety Section 2.18 Specification for endoscopic equipment-AMD 13100: October 31, 2002; Also known as BS 5724-2.18: 1997; IEC 60601-2-18: 1996

BSI BS EN 60601-2- 2

Medical Electrical Equipment - Part 2-2: Particular Requirements for the Safety of High Frequency Surgical Equipment

BSI BS EN 60601-2- 20

Medical Electrical Equipment Part 2: Particular Requirements for Safety - Specification for Transport Incubators-Supersedes BS 5724 Section 2.120: 1991; Also Known as BS 5724-2.120: 1997; IEC 601-2-20: 1990

BSI BS EN 60601-2- 22

Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2. 122: Specification for Diagnostic and Therapeutic Laser Equipment-Also Known as BS 5724-2.122:1996; Supersedes BS 5724-2.122:1993; IEC 601-2-22:1995

BSI BS EN 60601-2- 23

Medical Electrical Equipment - Part 2-23: Particular Requirements for the Safety, Including Essential Performance, of Transcutaneous Partial Pressure Monitoring Equipment-Supersedes BS EN 60601-3-1:1997

BSI BS EN 60601-2- 24

Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Infusion Pumps and Controllers-CORR 10114: July 1998; Also Known as BS 5724-2- 124:1998; IEC 60601-2-24:1998

BSI BS EN 60601-2- 25

Medical Electrical Equipment - Part 2-25: Particular Requirements for the Safety of Electrocardiographs-AMD 9112: July, 1996; AMD 10844: October, 2000; IEC 60601- 2-25: 1993

BSI BS EN 60601-2- 27

Medical Electrical Equipment Part 2: Particular Requirements for Safety - Specification for Electrocardiographic Monitoring Equipment-Also Known as BS 5724: Section 2.127:1995; IEC 601-2-27:1994

BSI BS EN 60601-2- 28

Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.128: Specification for X-Ray Source Assemblies and X-Ray Tube Assemblies for Medical Diagnosis-Also Known as BS 5724: Section 2.128: 1993; IEC 601-2-28: 1993

BSI BS EN 60601-2- 30

Medical Electrical Equipment - Part 2-29: Particular Requirements for Safety, Including Essential Performance, of Automatic Cycling Non-Invasive Blood Pressure Monitoring Equipment-IEC 60601-2-30: 1999

BSI BS EN 60601-2- 31

Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.31: Specification for External Cardiac Pacemakers with Internal Power Source-AMD 10132: November 1998; Also Known as BS 5724-2.31: 1995; IEC 60601-2-31: 1994

BSI BS EN 60601-2- 32

Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.32: Specification for Associated Equipment of X-Ray Equipment-Also Known as BS 5724-2.32:1995; IEC 601-2-32: 1994

BSI BS EN 60601-2- 33

Medical electrical equipment - Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis

BSI BS EN 60601-2- 34

Medical Electrical Equipment - Part 2-34: Particular Requirements for the Safety, Including Essential Performance, of Invasive Blood Pressure Monitoring Equipment- IEC 60601-2-34: 2000;

BSI BS EN 60601-2- 35

Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.35: Specification for Blankets, Pads and Mattresses Intended for Heating in Medical Use-Also Known as BS 5724: Section 2.35: 1997; IEC 601-2-35: 1996

BSI BS EN 60601-2- 37

Medical Electrical Equipment - Part 2-37: Particular Requirements for the Safety of Ultrasonic Medical Diagnostic and Monitoring Equipment-IEC 60601-2-37: 2001;

BSI BS EN 60601-2- 44

Medical electrical equipment Part 2-44: Particular requirements for the safety of X-ray equipment for computed tomography-AMD 14238: February 19, 2003; Also Known as BS 5724-2.44: 2001;

BSI BS EN 60601-2- 45

Medical Electrical Equipment - Part 2-45: Particular Requirements for Safety of Mammographic X-Ray Equipment and Mammographic Stereotactic Devices-Also Known as BS 5724-2-45:2001; IEC 60601-2-45:2001

BSI BS EN 60601-2- 49

Medical Electrical Equipment - Part 2-49: Particular Requirements for the Safety of Multifunction Patient Monitoring Equipment-IEC 60601-2-49:2001;

BSI BS EN 60601-2- 7

Medical Electrical Equipment - Part 2-7: Particular Requirements for Safety - Specification for High Voltage Generators of Diagnostic X-Ray Generators-Supersedes BS 5724-2.7: 1987; Also Known as BS 5724-2.7: 1998; IEC 60601-2-7: 1998;

BSI BS EN 60601-2- 9

Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.9: Specification for Patient Contact Dosemeters Used in Radiotherapy with Electrically Connected Radiation Detectors-Supersedes BS 5724: Section 2.9:1988; Also Known as B

BSI BS EN 60825- 1

Safety of Laser Products - Part 1: Equipment Classification, Requirements and Users Guide-AMD 9019: April 1996; AMD 9505: June 1997; AMD 13230: September 24, 2002; CORR 15182: May 20, 2004

BSI BS EN 60825- 4

Safety of laser products Part 4: Laser guards-AMD 14245: March 26, 2003; AMD 14844 January 29, 2004; IEC 60825-4: 1997;

BSI BS EN 61511- 1

Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, hardware and software requirements-AMD 15776:April 11, 2005; Renumbers BS IEC 61511-1:2003

BSI BS EN 61511- 2

Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1-AMD 15577: May 11, 2005; Renumbers BS IEC 61511-2: 2003

BSI BS EN 61511- 3

Functional safety Safety instrumented systems for the process industry sector Part 3: Guidance for the determination of the required safety integrity levels-AMD 15578: May 16, 2005; Renumbers BS IEC 61511-3:2003

BSI BS EN 62061

Safety of machinery Functional safety of safety-related electrical, electronic and programmable electronic control systems

BSI BS EN 724

Guidance on the Application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for Non-Active Medical Devices (N)

BSI BS EN 737- 1

Medical Gas Pipeline Systems - Part 1: Terminal Units for Compressed Medical Gases and Vacuum-Together with BS EN 739: 1998, it Partially Supersedes BS 5682: 1984:

BSI BS EN 737- 2

Medical Gas Pipeline Systems - Part 2: Anaesthetic Gas Scavenging Disposal Systems - Basic Requirements-AMD 10864, August 2000; Together with BS EN 737- 4: 1998 and Clause 111 of BS EN 740: 1998, it Supersedes BS 6834: 1987;

BSI BS EN 737- 3 Medical Gas Pipeline Systems - Part 3: Pipelines for Compressed Medical Gases and Vacuum

BSI BS EN 738- 1

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow metering devices-AMD 13720: October 16, 2002;

BSI BS EN 739

Low-pressure hose assemblies for use with medical gases-AMD 13722: October 16, 2002; Together with BS EN 737-1: 1998, it Partially Supersedes BS 5682: 1984;

BSI BS EN 740

Anaesthetic workstations and their modules Particular requirements- AMD 15021:July 7, 2004; Supersedes BS 5724-13:1990; Together with BS EN 737-2:1998 and BS EN 737-4:1998 partially supersedes BS 6834:1997; Also known as BS 5724- 2.204:1999

BSI BS EN 779 Particulate air filters for general ventilation - Determination of the filtration performance

BSI BS EN 794- 1

Lung Ventilators - Part 1: Particular Requirements for Critical Care Ventilators-AMD 13084: July 2001; Supersedes BS 5724-2.12: 1990; Also Known as BS 5724- 2.202: 1997

BSI BS EN 795

Protection Against Falls from a Height - Anchor Devices - Requirements and Testing-AMD 13006: May 2001; Partly Supersedes BS 5845: 1991;

BSI BS EN 812 Industrial Bump Caps-AMD 13666: July 30, 2002; Supersedes BS 4033: 1966;

BSI BS EN 866- 1

Biological Systems for Testing Sterilizers and Sterilization Processes Part 1: General Requirements

BSI BS EN 866- 2

Biological Systems for Testing Sterilizers and Sterilization Processes Part 2: Particular Systems for Use in Ethylene Oxide Sterilizers

BSI BS EN 866- 3

Biological Systems for Testing Sterilizers and Sterilization Processes Part 3: Particular Systems for Use in Moist Heat Sterilizers

BSI BS EN 866- 5

Biological Systems for Testing Sterilizers and Sterilization Processes - Part 5: Particular Systems for Use in Low Temperature Steam and Formaldehyde Sterilizers

BSI BS EN 866- 8

Biological Systems for Testing Sterilizers and Sterilization Processes - Part 8: Particular Requirements for Self-Contained Biological Indicator Systems for Use in Ethylene Oxide Sterilizers

BSI BS EN 868- 1

Packaging Materials and Systems for Medical Devices Which are to be Sterilized Part 1: General Requirements and Test Methods

BSI BS EN 868- 10

Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 10: Adhesive Coated Nonwoven Materials of Polyolefines for Use in the Manufacture of Heat Sealable Pouches, Reels and Lids - Requirements and Test Methods

BSI BS EN 868- 2

Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 2: Sterilization Wrap - Requirements and Test Methods-Supersedes BS 6254:1989 and BS 6255:1989;

BSI BS EN 868- 3

Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 3: Paper for Use in the Manufacture of Paper Bags (Specified in EN 868-4) and in the Manufacture of Pouches and Reels (Specified in EN 868-5) - Requirements and Test

BSI BS EN 868- 4

Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 4:Paper Bags - Requirements and Test Methods-Supersedes BS 6257: 1989;

BSI BS EN 868- 5

Packaging materials and systems for medical devices which are to be sterilized Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction Requirements and test methods-CORR 14073: January 15, 2003; Supersedes BS 6871: 198

BSI BS EN 868- 6

Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 6: Paper for the Manufacture of Packs for Medical Use for Sterilization by Ethylene Oxide or Irradiation - Requirements and Test Methods

BSI BS EN 868- 7

Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 7: Adhesive Coated Paper for the Manufacture of Heat Sealable Packs for Medical Use for Sterilization by Ethylene Oxide or Irradiation - Requirements and Test Methods

BSI BS EN 868- 8

Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 8: Re-Usable Sterilization Containers for Steam Sterilizers Conforming to EN 285 - Requirements and Test Methods

BSI BS EN 868- 9

Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 9: Uncoated Nonwoven Materials of Polyolefines for Use in the Manufacture of Heat Sealable Pouches, Reels and Lids - Requirements and Test Methods

BSI BS EN 882 Chemicals used for treatment of water intended for human consumption Sodium aluminate

BSI BS EN ISO 10075- 2 Ergonomic principles related to mental workload Part 2: Design principles

BSI BS EN ISO 10079- 1

Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements-Also known as BS 5724-2.28:2000

BSI BS EN ISO 10079- 3

Medical Suction Equipment - Part 3: Suction Equipment Powered from a Vacuum or Pressure Source

BSI BS EN ISO 10555- 1

Sterile, Single-Use Intravascular Catheters Part 1: General Requirements- AMD 10805; January 2000; Supersedes BS 7174-1:1990;

BSI BS EN ISO 10555- 2

Sterile, single-use intravascular catheters Part 2: Angiographic catheters- CORR 14058: January 7, 2003; Supersedes BS 7174-2: 1990;

BSI BS EN ISO 10555- 3

Sterile, single-use intravascular catheters Part 3: Central venous catheters-CORR 14057: January 7, 2003; Supersedes BS 7174-3: 1990;

BSI BS EN Sterile, single-use intravascular catheters Part 4: Balloon dilatation catheters-CORR 14061:

ISO 10555- 4 January 7, 2003; Supersedes BS 7174-5: 1990;

BSI BS EN ISO 10555- 5

Sterile, single-use intravascular catheters Part 5: Over-needle peripheral catheters-CORR 14060: January 14, 2003; Supersedes BS 4843: 1987;

BSI BS EN ISO 10651- 2

Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 2: Home care ventilators for ventilator-dependent patients- Supersedes BS EN 794-2:1997

BSI BS EN ISO 10651- 6

Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 6: Home-care ventilatory support devices

BSI BS EN ISO 10993- 1 Biological evaluation of medical devices Part 1: Evaluation and testing

BSI BS EN ISO 10993- 11

Biological Evaluation of Medical Devices Part 11: Tests for Systematic Toxicity (N)

BSI BS EN ISO 10993- 12

Biological evaluation of medical devices Part 12: Sample preparation and reference materials

BSI BS EN ISO 10993- 13

Biological Evaluation of Medical Devices - Part 13: Identification and Quantification of Degradation Products from Polymeric Medical Devices

BSI BS EN ISO 10993- 14

Biological Evaluation of Medical Devices - Part 14: Identification and Quantification of Degradation Products from Ceramics-CORR 13748: March 15, 2002

BSI BS EN ISO 10993- 15

Biological Evaluation of Medical Devices - Part 15: Identification and Quantification of Degradation Products from Metals and Alloys

BSI BS EN ISO 10993- 16

Biological Evaluation of Medical Devices Part 16: Toxicokinetic Study Design for Degradation Products and Leachables

BSI BS EN ISO 10993- 17

Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances

BSI BS EN ISO 10993- 18

Biological evaluation of medical devices Part 18: Chemical characterization of materials

BSI BS EN ISO 10993- 2 Biological Evaluation of Medical Devices - Part 2: Animal Welfare Requirements

BSI BS EN ISO 10993- 3

Biological evaluation of medical devices Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity-CORR 14920: December 23, 2003; Supersedes BS EN 30993-3: 1994;

BSI BS EN ISO 10993- 4

Biological evaluation of medical devices Part 4: Selection of tests for interactions with blood-CORR 14295: January 29, 2003; Supersedes BS EN 30993-4: 1994;

BSI BS EN ISO 10993- 5

Biological Evaluation of Medical Devices - Part 5: Tests for In Vitro Cytotoxicity-Supersedes BS EN 30993-5:1994;

BSI BS EN ISO 10993- 7 Biological Evaluation of Medical Devices Part 7: Ethylene Oxide Sterilization Residuals (N)

BSI BS EN ISO 10993- 8

Biological Evaluation of Medical Devices - Part 8: Selection and Qualification of Reference Materials for Biological Tests

BSI BS EN ISO 10993- 9

Biological Evaluation of Medical Devices - Part 9: Framework for Identification and Quantification of Potential Degradation Products-AMD 10742: January 2000;

BSI BS EN ISO 11070 Sterile, Single-Use Intravascular Catheter Introducers-Supersedes BS 7174-4: 1990;

BSI BS EN ISO 11399

Ergonomics of the Thermal Environment - Principles and Application of Relevant International Standards-AMD 13444: October 29, 2001; Renumbers BS ISO 11399:1995

BSI BS EN ISO 11737- 2

Sterilization of Medical Devices - Microbiological Methods - Part 2: Tests of Sterility Performed in the Validation of a Sterilization Process

BSI BS EN ISO 11885

Water Quality - Determination of 33 Elements by Inductively Coupled Plasma Atomic Emission Spectroscopy-Also Known as BS 6068-2.60:1998

BSI BS EN ISO 11979- 1 Ophthalmic Implants - Intraocular Lenses - Part 1: Vocabulary

BSI BS EN ISO 11979- 2 Ophthalmic Implants - Intraocular Lenses - Part 2: Optical Properties and Test Methods

BSI BS EN ISO 11979- 4 Ophthalmic Implants - Intraocular Lenses - Part 4: Labellings and Information

BSI BS EN ISO 12870

Ophthalmic optics Spectacle frames Requirements and test methods-Supersedes BS EN ISO 12870:1998 and BS EN ISO 9456:1997

BSI BS EN ISO 13212

Ophthalmic Optics - Contact Lens Care Products - Guidelines for the Determination of Shelf-Life-Also Known as BS 7208-20:1999

BSI BS EN ISO 13488

Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002-Supersedes BS EN 46002: 1997; ISO 13488: 1996

BSI BS EN ISO 14001 Environmental management systems Requirements with guidance for use

BSI BS EN ISO 14155- 1

Clinical investigation of medical devices for human subjects Part 1: General requirements-CORR 14481: May 15, 2003; Supersedes BS EN 540: 1993;

BSI BS EN ISO 14155- 2

Clinical Investigation of Medical Devices for Human Subjects - Part 2: Clinical Investigation Plans

BSI BS EN ISO 14630 Non-active surgical implants General requirements

BSI BS EN ISO 14644- 1

Cleanrooms and Associated Controlled Environments - Part 1: Classification of Air Cleanliness-CORR 13013: March 2001; Supersedes BS 5295-1:1989 and BS 5295-4:1989;

BSI BS EN ISO 14644- 2

Cleanrooms and Associated Controlled Environments - Part 2: Specifications for Testing and Monitoring to Prove Continued Compliance with ISO 14644-1- Supersedes BS 5295-4:1989;

BSI BS EN ISO 14644- 4

Cleanrooms and associated controlled environments Part 4: Design, construction and start-up-CORR 14472: May 1, 2003; Supersedes BS 5295-2:1989; BS EN ISO 14644-4:2001 together with BS EN ISO 14644-5:2004 Supersedes DD ENV 1631:1996

BSI BS EN ISO 14644- 5

Cleanrooms and associated controlled environments Part 5: Operations- Supersedes BS 5295-3:1989, It together with BS EN ISO 14644-4:2004, Supersedes DD ENV 1631:1996

BSI BS EN ISO 14644- 7

Cleanrooms and associated controlled environments Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)

BSI BS EN ISO 14698- 1

Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods-CORR 14813: October 27,2003;

BSI BS EN ISO 14698- 2

Cleanrooms and associated controlled environments Biocontamination control Part 2: Evaluation and interpretation of biocontamination data-CORR 14880: November 28, 2003; CORR 15552: February 21, 2005

BSI BS EN ISO 14729

Ophthalmic Optics - Contact Lens Care Products - Microbiological Requirements and Test Methods for Products and Regimens for Hygienic Management of Contact Lenses-Also Known as BS 7208-26:2001; Supersedes BS 7208 PART 3:1992

BSI BS EN ISO 14937

Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices-CORR 13353:September 2001; CORR 15195:June 16, 20

BSI BS EN ISO 14971

Medical Devices - Application of Risk Management to Medical Devices-CORR 14652; August 19, 2003

BSI BS EN ISO 15197

In vitro diagnostic test systems Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus-CORR 14616: August 5, 2003;

BSI BS EN ISO 16671 Ophthalmic implants Irrigating solutions for ophthalmic surgery

BSI BS EN ISO 17510- 1 Sleep Apnoea Breathing Therapy - Part 1: Sleep Apnoea Breathing Therapy Devices

BSI BS EN ISO 17510- 2 Sleep apnoea breathing therapy Part 2: Masks and application accessories

BSI BS EN ISO 17664

Sterilization of medical devices Information to be provided by the manufacturer for the processing of resterilizable medical devices

BSI BS EN ISO 20344

Personal protective equipment Test methods for footwear- Supersedes BS EN 344-1:1993 and BS EN 344-2:1997

BSI BS EN ISO 20345

Personal protective equipment Safety footwear-Supersedes BS EN 345-1:1993 and BS EN 345-2:1997

BSI BS EN ISO 21647

Medical electrical equipment Particular requirements for the basic safety and essential performance of respiratory gas monitors-Supersedes BS EN 12598:1999, BS EN 864:1997 and BS EN ISO 11196:1997

BSI BS EN ISO 4126- 2

Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices-CORR 15405: November 4, 2004; Partially supersedes BS 2915: 1990

BSI BS EN ISO 5349- 1

Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 1: General Requirements-CORR 13821: March 27, 2002; Supersedes BS 6842: 1987;

BSI BS EN ISO 5349- 2

Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 2: Practical Guidance for Measurement at the Workplace

BSI BS EN ISO 5667- 3

Water quality Sampling Part 3: Guidance on the preservation and handling of water samples-CORR 15073: April 7, 2004; Supersedes BS 6068-6.3:1996; Also Known As BS 6068-6.3: 2003

BSI BS EN ISO 6385 Ergonomic principles in the design of work systems-CORR 15063: April 2, 2004;

BSI BS EN ISO 7027

Water Quality - Determination of Turbidity-Also Known as BS 6068- 2.13:2000; Supersedes BS EN 27027:1994

BSI BS EN ISO 7730

Moderate Thermal Environments - Determination of the PMV and PPD Indices and Specification of the Conditions for Thermal Comfort-AMD 9036: June 15, 1996;

BSI BS EN ISO 7933

Ergonomics of the thermal environment Analytical determination and interpretation of heat stress using calculation of the predicted heat strain-Supersedes BS EN 12515:1997

BSI BS EN ISO 9377- 2

Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography-CORR 13416: October 5, 2001; Also Known as BS 6068-2.72: 2000

BSI BS EN ISO 9626

Stainless Steel Needle Tubing for the Manufacture of Medical Devices- CORR 13672: January 31, 2002;

BSI BS EN ISO 9703- 3 Anaesthetic and Respiratory Care Alarm Signals - Part 3: Guidance on Application of Alarms

BSI BS EN ISO 9999

Technical aids for persons with disabilities Classification and terminology-CORR 14318: January 30, 2003;

BSI BS ISO 10390 Soil quality Determination of pH-Supersedes BS 7755- 3.2:1995

BSI BS ISO 14004

Environmental management systems General guidelines on principles, systems and support techniques

BSI BS ISO 14520- 1

Gaseous Fire-Extinguishing Systems - Physical Properties and System Design - Part 1: General Requirements-CORR 13394:October 26,2001;Together with BS ISO 14520-2, BS ISO 14520-3, BS ISO 14520-4, BS ISO 14520-6, BS ISO 14520-7, BS ISO 14520-8,BS ISO 145

BSI BS ISO 14966

Ambient air Determination of numerical concentration of inorganic fibrous particles Scanning electron microscopy method

BSI BS ISO 16000- 1 Indoor air Part 1: General aspects of sampling strategy

BSI BS ISO 16000- 2 Indoor air Part 2: Sampling strategy for formaldehyde

BSI BS ISO 16000- 3

Indoor Air - Part 3: Determination of Formaldehyde and Other Carbonyl Compounds - Active Sampling Method

BSI BS ISO 16000- 4 Indoor air Part 4: Determination of formaldehyde Diffusive sampling method

BSI BS ISO 2631- 4

Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body Vibration - Part 4: Guidelines for the Evaluation of the Effects of Vibration and Rotational Motion on Passenger and Crew Comfort in Fixed-Guideway Transport Systems

BSI BS ISO 7176- 1 Wheelchairs - Part 1: Determination of Static Stability

BSI BS ISO 7176- 8

Wheelchairs - Part 8: Requirements and Test Methods for Static, Impact and Fatigue Strengths

BSI DD 9999 Code of practice for fire safety in the design, construction and use of buildings

BSI OHSAS 18001

Occupational health and safety management systems Specification- AMD 14223: December 13, 2002;

BSI OHSAS 18002

Occupational health and safety management systems Guidelines for the implementation of OHSAS 18001-AMD 14224: December 13, 2002

BSI PD 6519 PART 1

Guide to Effects of Current on Human Beings and Livestock Part 1: General Aspects (IEC 479-1: 1994) (N)

BSI PD 6519 PART 2

Guide to Effects of Current on Human Beings and Livestock Part 2: Special Aspects Relating to Human Beings (AMD 8649) June 15, 1995 (IEC 479-2: 1987) (N)- Amd 1;

BSI PD 6519- 3

Guide to Effects of Current on Human Beings and Livestock - Part 3: Effects of Currents Passing Through the Body of Livestock-IEC 60479-3: 1998;

BSI PD 6609 Environmental Cleanliness in Enclosed Spaces - Guide to Test Methods

BSI PD 7974- 2

Application of Fire Safety Engineering Principles to the Design of Buildings - Part 2: Spread of Smoke and Toxic Gases within and Beyond the Enclosure of Origin (Sub- System 2)

BSI PD 7974- 3

Application of fire safety engineering principles to the design of buildings Part 3: Structural response and fire spread beyond the enclosure of origin (Sub-system 3)

BSI PD CLC/TR 50426

Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation Guide-Supersedes BS 6656:2002

BSI PD IEC TR 61508- 0

Functional safety of electrical/electronic/ programmable electronic safey- related systems - Part 0: Functional safety and IEC 61508

BSI PD ISO/TR 14032

Environmental Management - Examples of Environmental Performance Evaluation (EPE)-ISO/TR 14032: 1999;

BSI PD ISO/TR 14047

Environmental management Life cycle impact assessment Examples of application of ISO 14042

BSI - MATERIALS COLLECTIONPopular Standards from this Collection.

BSI BS 1052 Mild steel wire for general engineering purposes-AMD 6530: May 1991;

BSI BS 1088- 1 Marine plywood Part 1: Requirements-Together with BS 1088-2:2003 Supersedes BS 1088 & 4079:1966;

BSI BS 1154 Natural rubber compounds - Specification

BSI BS 131- 1 Methods for Notched Bar Tests Part 1: The Izod Impact Test on Metals- Amd 2;

BSI BS 131- 4Methods for Notched Bar Tests Part 4: Calibration of Izod Pendulum Impact Testing Machines for Metals-AMD 7768; August 15, 1993; Partially Replaced by BS EN 10045-2: 1993;

BSI BS 1407 High Carbon Bright Steel (Silver Steel) (V)-Amd 1;

BSI BS 1435- 2 Rubber hose assemblies for oil suction and discharge services Part 2: Recommendations for storage, testing and use

BSI BS 1449 SEC 1.1

Steel Plate, Sheet and Strip Part 1: Carbon and Carbon-Manganese Plate, Sheet and Strip Section 1.1: General Specification

BSI BS 1449- 1.14

14Steel Plate, Sheet and Strip Part 1: Carbon and Carbon-Manganese Plate, Sheet and Strip Section 1.14: Supplied in a Range of Conditions for Heat Treatment and General Engineering Purposes (Continues)

BSI BS 1449- 1.8

Steel Plate, Sheet and Strip Part 1: Carbon and Carbon-Manganese Plate, Sheet and Strip Section 1.8: Specification for Hot Rolled Narrow Strip Based on Formability

BSI BS 1473 Wrought aluminium and aluminium alloys for general engineering purposes Rivet, bolt and screw stock-AMD 4477: February 1984;

BSI BS 2050 Electrical Resistance of Conducting and Antistatic Products Made from Flexible Polymeric Material-AMD 4499: May 15, 1984

BSI BS 2572 Phenolic Laminated Sheet and Epoxy Cotton Fabric Laminated Sheet- AMD 8841: October 15, 1995; Supersedes BS 5102: 1974; Partially superseded by BS EN 60893-2: 1995;

BSI BS 2751 General Purpose Acrylonitrile-Butadiene Rubber Compounds - Specification-CORR 13623: December 21, 2001;

BSI BS 2752 Chloroprene rubber compounds Specification

BSI BS 2782- 0 Methods of testing plastics Part 0: Introduction

BSI BS 2782-3 METH 340A-B

Methods of Testing Plastics - Part 3: Mechanical Properties - Method 340A: Determination of Shear Strength of Moulding Material - Method 340B: Determination of Shear Strength of Sheet Material-AMD 5168: July 1987

BSI BS 2782-6 Methods of testing Plastics Part 6: Dimensional properties Methods 620A to 620D:

METH 620A TO D

Determination of density and relative density of non-cellular plastics- AMD 14474: September 26, 2003; Renumbers BS 2782-6: METH 620C&620D; Partially Superseded By BS EN

BSI BS 2782PT3: METH 320A-F

Methods of Testing Plastics Part 3: Mechanical Properties Methods 320A to 320F: Tensile Strength, Elongation and Elastic Modulus-AMD 8057; January 1994; Supersedes BS 2782: Method 321: 1993, BS 2782: Part 3: Method 322: 1994

BSI BS 3072 Nickel and Nickel Alloys: Sheet and Plate

BSI BS 3074 Nickel and Nickel Alloys: Seamless Tube

BSI BS 3075 Nickel and Nickel Alloys: Wire-Amd 1;

BSI BS 3076 Nickel and Nickel Alloys: Bar

BSI BS 3146 PART 1 Investment Castings in Metal Part 1: Carbon and Low Alloy Steels

BSI BS 3146 PART 2

Investment Castings in Metal Part 2: Corrosion and Heat Resisting Steels, Nickel and Cobalt Base Alloys-Amd 1;

BSI BS 3396 PART 1

Woven Glass Fibre Fabrics for Plastics Reinforcement Part 1: Specification for Loom-State Fabrics

BSI BS 3412 General Purpose Polyethylene Materials for Moulding and Extrusion (V)

BSI BS 3734- 1 Rubber - Tolerances for Products - Part 1: Dimensional Tolerances-AMD 13324: October 16,2001; ISO 3302-1: 1996;

BSI BS 3757 Specification for Rigid PVC sheet-AMD 6291: July, 1990

BSI BS 3953 Synthetic Resin Bonded Woven Glass Fabric Laminated Sheet (AMD 8840) October 15, 1995 (V)-Amd 2;

BSI BS 4- 1 Structural Steel Sections - Part 1: Specification for Hot-Rolled Sections

BSI BS 4449 Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification

BSI BS 4482 Steel wire for the reinforcement of concrete products - Specification

BSI BS 4483 Steel Fabric for the Reinforcement of Concrete - Specification

BSI BS 5383 Material Identification of Steel, Nickel Alloy and Titanium Alloy Tubes by Continuous Character Marking and Colour Coding of Steel Tubes

BSI BS 5756 Visual Strength Grading of Hardwood

BSI BS 6323 PART 1

Seamless and Welded Steel Tubes for Automobile, Mechanical and General Engineering Purposes Part 1: General Requirements-Amd 2; Superseded by BS EN 10297-1:2003 but remains current;

BSI BS 6323 PART 8

Seamless and Welded Steel Tubes for Automobile, Mechanical and General Engineering Purposes Part 8: Specific Requirements for Longitudinally Welded Stainless Steel Tubes-Amd 2;

BSI BS 7079 PART 0

Preparation of Steel Substrates Before Application of Paints and Related Products Part 0: Introduction

BSI BS 7079 PART A1

Preparation of Steel Substrates Before Application of Paints and Related Products Group A: Visual Assessment of Surface Cleanliness Part A1: Specification for Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates After

BSI BS 7079 PT A1: SUPP 1

Prep of Steel Substrates Before Application of Paints and Related Prods Grp A: Visual Assessment of Surface Cleanliness Pt A1: Spec for Rust Grades and Prep Grades of Uncoated Steel Substrates and of Steel Substrates After Overal Reoval of Previous Coa

BSI BS 7079- A3Preparation of Steel Substrates Before Application of Paints and Related Products - Group A: Visual Assessment of Surface Cleanliness - Part A3: Preparation Grades of Welds, Cut Edges and Other Areas with Surface Imperfections-ISO 8501-3:2001;

BSI BS 7448 PART 2

Fracture Mechanics Toughness Tests Part 2: Method for Determination of KIc, Critical CTOD and Critical J Values of Welds in Metallic Materials

BSI BS 7448- 3Fracture mechanics toughness tests Part 3: Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5s-1

BSI BS 7448- 4Fracture Mechanics Toughness Tests - Part 4: Method for Determination of Fracture Resistance Curves and Initiation Values for Stable Crack Extension in Metallic Materials-CORR 12017:July 2001;

BSI BS 7608 Code of Practice for Fatigue Design and Assessment of Steel Structures (AMD 8337) February 15, 1995 (V)-Amd 1;

BSI BS 7668 Weldable structural steels Hot finished structural hollow sections in weather resistant steels Specification-Supersedes BS 4360:1990

BSI BS 7773 Code of Practice for Cleaning and Preparation of Metal Surfaces (V)

BSI BS 7837 Flammability Performance for Textiles Used in the Construction of Marquees and Similar Textile Structures (V)

BSI BS 8118 PART 1 Structural Use of Aluminium Part 1: Code of Practice for Design-AMD 10485; July 1999;

BSI BS 8118 PART 2

Structural Use of Aluminium Part 2: Specification for Materials, Workmanship and Protection-AMD 10486; July 1999;

BSI BS 8666 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete Specification

BSI BS 903 PART A1 Physical Testing of Rubber Part A1: Determination of Density (ISO 2781: 1988) (V)

BSI BS 903 PART A6

Physical Testing of Rubber Part A6: Method for Determination of Compression Set at Ambient, Elevated or Low Temperatures (AMD 7975) March 15, 1994 (ISO 815: 1991) (V)-Amd 1;

BSI BS 903- 0 Physical testing of rubber Part 0: General

BSI BS 903- A26 Physical Testing of Rubber - Part A26: Method for Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD)-AMD 13157:August 2001; ISO 48:1994;

BSI BS EN 10002- 1 Metallic Materials - Tensile Testing - Part 1: Method of Test at Ambient Temperature

BSI BS EN 10002- 5

Tensile Testing of Metallic Materials Part 5: Method of Test at Elevated Temperatures-Supersedes BS 3688: Part 1: 1963

BSI BS EN 10020 Definition and Classification of Grades of Steel

BSI BS EN 10021 General Technical Delivery Requirements for Steel and Iron Products (V)

BSI BS EN 10024

Hot Rolled Taper Flange I Sections - Tolerances on Shape and Dimensions-AMD 8995: December 15, 1995;

BSI BS EN 10025- 1

Hot rolled products of structural steels Part 1: General technical delivery conditions-Together with BS EN 10025-2 Supersedes BS EN 10025:1993; Together with BS EN 10025-3 Supersedes BS EN 10113-1:1993 and BS EN 10113-2:1993; Together with BS EN 10025

BSI BS EN 10025- 2

Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels-Together with BS EN 10025-1:2004 supersedes BS EN 10025:1993

BSI BS EN 10025- 3

Hot rolled products of structural steels Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels-Together with BS EN 10025-1 and BS EN 10025-4 Supersedes BS EN 10113-1:1993; Together with BS EN 1002

BSI BS EN 10025- 4

Hot rolled products of structural steels Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels-Together with BS EN 10025-1 and BS EN 10025-3 Supersedes BS EN 10113-1:1993; Together with BS EN 10025-1 S

BSI BS EN 10025- 5

Hot rolled products of structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance-Together with BS EN 10025-1 Supersedes BS EN 10155:1993

BSI BS EN 10025- 6

Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition-Together with BS EN 10025-1 Supersedes BS EN 10137-1:1996 and BS EN 10137-

BSI BS EN 10027- 1 Designation Systems for Steel Part 1: Steel Names, Principal Symbols

BSI BS EN 10027- 2 Designation systems for steels Part 2: Steel numbers

BSI BS EN 10028- 2

Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties

BSI BS EN 10028- 4

Flat products made of steels for pressure purposes Part 4: Nickel alloy steels with specified low temperature properties

BSI BS EN 10028- 5

Flat products made of steels for pressure purposes Part 5: Weldable fine grain steels, thermomechanically rolled

BSI BS EN 10028- 6

Flat products made of steels for pressure purposes Part 6: Weldable fine grain steels, quenched and tempered

BSI BS EN 10028- 7

Flat products made of steels for pressure purposes Part 7: Stainless steels-CORR 15330:August 17, 2004; Supersedes BS 1501-3:1990

BSI BS EN 10045- 1 Charpy Impact Test on Metallic Materials Part 1: Test Method (V- and U- Notches) (V)

BSI BS EN 10045- 2

Charpy Impact Test on Metallic Materials Part 2: Method for the Verification of Impact Testing Machines (V)

BSI BS EN 10048

Hot Rolled Narrow Steel Strip - Tolerances on Dimensions and Shape-AMD 10010; June 1998; Supersedes BS 1449: Section 1.12: 1991;

BSI BS EN 10051

Continuously Hot-Rolled Uncoated Plate, Sheet and Strip of Non- Alloy and Alloy Steels - Tolerances on Dimensions and Shape-AMD 9872; February 1998;

BSI BS EN 10052 Vocabulary of Heat Treatment Terms for Ferrous Products (V)

BSI BS EN 10056- 1

Structural Steel Equal and Unequal Leg Angles - Part 1: Dimensions- Supersedes BS 4848-4: 1972;

BSI BS EN Structural Steel Equal and Unequal Leg Angles Part 2: Tolerances on Shape and

10056- 2 Dimensions-Partially Replaces BS 4848: Part 4: 1972

BSI BS EN 10067

Hot Rolled Bulb Flats - Dimensions and Tolerances on Shape, Dimensions and Mass-Supersedes BS 4848: Part 5: 1980;

BSI BS EN 10079 Definition of Steel Products

BSI BS EN 1008Mixing Water for Concrete - Specification for Sampling, Testing and Assessing the Suitability of Water, Including Water Recovered from Processes in the Concrete Industry, as Mixing Water for Concrete-Supersedes BS 3148:1980

BSI BS EN 10083- 1

Quenched and Tempered Steels Part 1: Technical Delivery Conditions for Special Steels-AMD 9379: March 1997; AMD 9644: June 1997; CORR 10413: February 1999; CORR 10670: September 1999; CORR 10780: November 1999; Supersedes Certain Clauses of BS 970: Par

BSI BS EN 10083- 2

Quenched and Tempered Steels Part 2: Technical Delivery Conditions for Unalloyed Quality Steels-AMD 9380: March 1997; CORR 9946: March 1998

BSI BS EN 10083- 3 Quenched and Tempered Steels Part 3: Technical Delivery Conditions for Boron Steels

BSI BS EN 10084

Case Hardening Steels - Technical Delivery Conditions-AMD 10308; October 15, 1998; Partially Supersedes BS 970-1: 1996 by Replacing Section 4;

BSI BS EN 10087

Free cutting steels Technical delivery conditions for semi-finished products, hot-rolled bars and rods-CORR 10442: February, 1999; CORR 15803: January 23, 2006; Together with BS EN 10083-1: 1991, BS EN 10084: 1998, BS EN 10088-1: 1995, BS EN 10088-2:

BSI BS EN 10088- 1 Stainless steels - Part 1: List of stainless steels

BSI BS EN 10088- 2

Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

BSI BS EN 10088- 3

Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes-Supersedes BS 1554:1990

BSI BS EN 10089

Hot rolled steels for quenched and tempered springs Technical delivery conditions-Supersedes BS 970-2:1988

BSI BS EN 10090 Valve Steels and Alloys for Internal Combustion Engines-Supersedes BS 970-4:1970

BSI BS EN 10095

Heat Resisting Steels and Nickel Alloys-Supersedes BS 1449-2: 1983 and BS 970-1 (Section 5): 1996;

BSI BS EN 10111

Continuously Hot-Rolled Low Carbon Steel Sheet and Strip for Cold Forming - Technical Delivery Conditions-Supersedes BS 1449: Section 1.2: 1991;

BSI BS EN 10130

Cold-Rolled Low-Carbon Steel Flat Products for Cold Forming - Technical Delivery Conditions

BSI BS EN 10131

Cold-Rolled Uncoated Low Carbon and High Yield Strength Steel Flat Products for Cold Forming - Tolerances on Dimensions and Shape-AMD 8287: July 15, 1994;

BSI BS EN 10132- 1

Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions - Part 1: General-Together with BS EN 10132-2: 2000 and BS EN 10132-3: 2000, it Superseded BS 1449.1.15: 1991; Together with BS EN 10132-4: 2000, it Supersedes BS 5770: P

BSI BS EN 10132- 3

Cold rolled narrow steel strip for heat treatment Technical delivery conditions Part 3: Steels for quenching and tempering-CORR 11006; July 2000; Together with BS EN 10132-1 and BS EN 10132-2 Supersedes BS 1449.1.15: 1991

BSI BS EN 10132- 4

Cold rolled narrow steel strip for heat treatment Technical delivery conditions Part 4: Spring steels and other applications-Together with BS EN 10132-1 it Supersedes BS 5770 Parts 1,2 and 3:1981;

BSI BS EN 10139

Cold Rolled Uncoated Mild Steel Narrow Strip for Cold Forming - Technical Delivery Conditions-Supersedes BS 1449: Section 1.9: 1991;

BSI BS EN 10140

Cold Rolled Narrow Steel Strip - Tolerances on Dimensions and Shape-CORR 10339: November 15, 1998; Supersedes BS 1449: Section 1.13: 1991;

BSI BS EN 10143

Continuously Hot-Dip Metal Coated Steel Sheet and Strip - Tolerances on Dimensions and Shape-Supersedes BS 2989: 1992

BSI BS EN 10149- 1

Specification for Hot-rolled flat products made of high yield strength steels for cold forming Part 1: General delivery conditions

BSI BS EN 10149- 2

Specification for Hot-rolled flat products made of high yield strength steels for cold forming Part 2: Delivery conditions for thermomechanically rolled steels-AMD 9546; July 2,1997; Supersedes BS 1449 : Section 1.4:1991 and BS 1449 : Section 1.10 : 1

BSI BS EN 10149- 3

Specification for Hot-rolled flat products made of high yield strength steels for cold forming Part 3. Delivery conditions for normalized or normalized rolled steels-AMD 10150; December 15, 1998; Supersedes BS 1449: Section 1.4: 1991 and BS 1449: Secti

BSI BS EN 10151 Stainless steel strip for springs Technical delivery conditions- Supersedes BS 5770-4: 1981;

BSI BS EN 10160

Ultrasonic Testing of Steel Flat Product of Thickness Equal or Greater Than 6 mm (Reflection Method)-(V) Supersedes BS 5996:1993

BSI BS EN 10162

Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances-Supersedes BS 2994: 1976;

BSI BS EN 10163- 1

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections Part 1: General requirements

BSI BS EN 10163- 2

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections Part 2: Plate and wide flats

BSI BS EN 10163- 3

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections Part 3: Sections

BSI BS EN 10164

Steel products with improved deformation properties perpendicular to the surface of the product Technical delivery conditions

BSI BS EN 10204 Metallic products Types of inspection documents

BSI BS EN 10207

Steels for simple pressure vessels Technical delivery requirements for plates, strips and bars

BSI BS EN 10209

Cold-rolled low carbon steel flat products for vitreous enamelling Technical delivery conditions

BSI BS EN 10210- 1

Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Structural Steels Part 1: Technical Delivery Requirements-Supersedes BS 4360:1990

BSI BS EN 10210- 2

Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Structural Steels Part 2: Tolerances, Dimensions and Sectional Properties-Supersedes BS 4848: Part 2: 1991;

BSI BS EN 10213- 2

Technical Delivery Conditions for Steel Castings for Pressure Purposes Part 2: Steel Grades for Use at Room Temperature and at Elevated Temperature (V)

BSI BS EN 10213- 3

Corr.1 Technical Delivery Conditions for Steel Castings for Pressure Purposes Part 3: Steels for Use at Low Temperatures-CORR 10195; September 15, 1998; Together with Parts 1,2 and 4, it Supersedes BS 1504: 1976;

BSI BS EN 10216- 5

Seamless steel tubes for pressure purposes Technical delivery conditions Part 5: Stainless steel tubes-Supersedes BS 3605-1:1991

BSI BS EN 10219- 1

Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels Part 1: Technical Delivery Requirements

BSI BS EN 10220

Seamless and welded steel tubes Dimensions and masses per unit length-Supersedes BS 3600:1997 and DD ENV 10220:1994

BSI BS EN 10225

Weldable Structural Steels for Fixed Offshore Structures - Technical Delivery Conditions-CORR 14055: January 17, 2003; Supersedes BS 7191:1989;

BSI BS EN 10228- 1 Non-Destructive Testing of Steel Forgings - Part 1: Magnetic Particle Inspection

BSI BS EN 10228- 2 Non-Destructive Testing of Steel Forgings - Part 2: Penetrant Testing

BSI BS EN 10228- 3

Non-Destructive Testing of Steel Forgings - Part 3: Ultrasonic Testing of Ferritic or Martensitic Steel Forgings-Together with BS EN 10228-4: 1998, They Supersede BS 4124: 1991;

BSI BS EN 10228- 4

Non-Destructive Testing of Steel Forgings - Part 4: Ultrasonic Testing of Austenitic and Austenitic-Ferritic Stainless Steel Forgings-AMD 13204; September 2001; Together with BS EN 10228-3: 1998, Supersedes BS 4124: 1991;

BSI BS EN 10229 Evaluation of Resistance of Steel Products to Hydrogen Induced Cracking (HIC)

BSI BS EN 10240

Internal and/or External Protective Coatings for Steel Tubes - Specification for Hot Dip Galvanized Coatings Applied in Automatic Plants

BSI BS EN 10244- 2

Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 2: Zinc or Zinc Alloy Coatings-CORR 13233: September 14, 2001; Supersedes BS 443: 1982;

BSI BS EN 10258

Cold-Rolled Stainless Steel Narrow Strip and Cut Lengths - Tolerances on Dimensions and Shape-AMD 9862; January 1998; Partially Supersedes BS 1449: Part 2: 1983 and BS 1501: Part 3: 1990

BSI BS EN 10259

Cold-Rolled Stainless Steel Wide Strip and Plate/Sheet - Tolerances on Dimensions and Shape-AMD 9863: January 1998

BSI BS EN 10263- 1

Steel rod, bars and wire for cold heading and cold extrusion Part 1: General technical delivery conditions-CORR 14066: December 16, 2002; Together with BS EN 10263-2: 2001, BS EN 10263-3: 2001 and BS EN 10263-4: 2001 it supersedes BS 3111-1: 1987; Sup

BSI BS EN 10263- 2

Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 2: Technical Delivery Conditions for Steels Not Intended for Heat Treatment After Cold Working- CORR 13450: September 13, 2001; Together with BS EN 10263-1:2001, BS EN 10263-3:2001 and

BSI BS EN 10269

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties-CORR 10988: June 2000; Supersedes BS 1506: 1990;

BSI BS EN 10270- 1

Steel Wire for Mechanical Springs - Part 1: Patented Cold Drawn Unalloyed Spring Steel Wire-Supersedes BS 5216:1991;

BSI BS EN 10270- 3

Steel Wire for Mechanical Springs - Part 3: Stainless Spring Steel Wire- Supersedes BS 2056:1991;

BSI BS EN 10277- 1

Bright steel products - Technical delivery conditions - Part 1: General- Together with BS EN 10278 and BS EN 10277 Parts 2 to 5 Supersedes BS 970- 3:1991

BSI BS EN Bright Steel Products - Technical Delivery Conditions - Part 2: Steels for General

10277- 2 Engineering Purposes-Together with BS EN 10278 and BS EN 10277 Parts 1,3,4 and 5 Supersedes BS 970-3:1991

BSI BS EN 10277- 3

Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels-Together with BS EN 10278 and BS EN 10277 Parts 1,2,4 and 5 Supersedes BS 970- 3:1991;

BSI BS EN 10277- 4

Bright steel products - Technical delivery conditions - Part 4: Case- hardening steels-Together with BS EN 10278 and BS EN 10277 Parts 1,2,3 and 5 Supersedes BS 970-3:1991;

BSI BS EN 10277- 5

Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering-Together with BS EN 10278 and BS EN 10277 Parts 1 to 4 Supersedes BS 970-3:1991

BSI BS EN 10278

Dimensions and tolerances of bright steel products-Together with BS EN 10277 Parts 1 to 5 Supersedes BS 970-3:1991

BSI BS EN 10279

Hot rolled steel channels - Tolerances on shape, dimension and mass-CORR 12002: October 2000

BSI BS EN 10293 Steel castings for general engineering uses-Supersedes BS 3100:1991

BSI BS EN 10296- 1

Welded circular steel tubes for mechanical and general engineering purposes Technical delivery conditions Part 1: Non-alloy and alloy steel tubes-Supersedes BS 6323-7:1982; Supersedes BS 6323 PART 2:1982

BSI BS EN 10297- 1

Seamless circular steel tubes for mechanical and general engineering purposes Technical delivery conditions Part 1: Non-alloy and alloy steel tubes-CORR 14629: August 6, 2003; Supersedes BS 6323-3: 1982;

BSI BS EN 10305- 1

Steel tubes for precision applications Technical delivery conditions Part 1: Seamless cold drawn tubes-CORR 14626: August 6, 2003; Together with BS EN 10305- 4:2003 Supersede BS 6323-4: 1982;

BSI BS EN 10305- 4

Steel tubes for precision applications Technical delivery conditions Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems-Together with BS EN 10305-1: 2002 Supersedes BS 6323-4: 1982;

BSI BS EN 10308 Non-Destructive Testing - Ultrasonic Testing of Steel Bars

BSI BS EN 10327

Continuously hot-dip coated strip and sheet of low carbon steels for cold forming Technical delivery conditions-Supersedes BS EN 10142:2000, and together with BS EN 10326:2006, supersedes BS EN 10154:2004:1995 and BS EN 10215:1995

BSI BS EN 1057 Copper and Copper Alloys - Seamless, Round Copper Tubes for Water and Gas in Sanitary and Heating Applications

BSI BS EN 1122 Plastics - Determination of Cadmium - Wet Decomposition Method- Supersedes DD ENV 1122:1995;

BSI BS EN 1173 Copper and Copper Alloys - Material Condition or Temper Designation (V)

BSI BS EN 12020- 1

Aluminium and Aluminium Alloys - Extruded Precision Profiles in Alloys EN AW-6060 and EN AW-6063 - Part 1: Technical Conditions for Inspection and Delivery- Together with BS EN 515:1993, BS EN 573-3 and -4:1995, BS EN 755-1 and -2:1997, BS EN 755-3 Thru

BSI BS EN 12163

Copper and Copper Alloys - Rod for General Purposes-Together with BS EN 12164 and BS EN 12167, it Supersedes BS 2874: 1986;

BSI BS EN 12164

Copper and Copper Alloys - Rod for Free Machining Purposes-AMD 11036; January 2001; Together with BS EN 12163 and BS EN 12167 it Supersedes BS 2874: 1986;

BSI BS EN 12165

Copper and Copper Alloys - Wrought and Unwrought Forging Stock- Supersedes BS 2872: 1989;

BSI BS EN 12166 Copper and Copper Alloys - Wire for General Purposes-Supersedes BS 2873: 1969;

BSI BS EN 12167

Copper and Copper Alloys - Profiles and Rectangular Bar for General Purposes-Together with BS EN 12163 and BS EN 12164 it Supersedes BS 2874: 1986;

BSI BS EN 12385- 1 Steel wire ropes Safety Part 1: General requirements-CORR 15085: March 17, 2004;

BSI BS EN 12385- 2 Steel wire ropes Safety Part 2: Definitions, designation and classification

BSI BS EN 12385- 4

Steel wire ropes Safety Part 4: Stranded ropes for general lifting applications-Supersedes BS 302-2: 1987;

BSI BS EN 12385- 5 Steel wire ropes Safety Part 5: Stranded ropes for lifts-Supersedes BS 302-4: 1987;

BSI BS EN 12449

Copper and Copper Alloys - Seamless, Round Tubes for General Purposes-Supersedes BS 2871-2:1972;

BSI BS EN 12451

Copper and Copper Alloys - Seamless, Round Tubes for Heat Exchangers-Supersedes BS 2871: Part 3: 1972;

BSI BS EN 12472

Method for the Simulation of Wear and Corrosion for the Detection of Nickel Release from Coated Items

BSI BS EN 12499 Internal cathodic protection of metallic structures-CORR 14828: December 1, 2003;

BSI BS EN 13411- 5 Terminations for steel wire ropes Safety Part 5: U-bolt wire rope grips

BSI BS EN 13411- 6 Terminations for steel wire ropes Safety Part 6: Asymmetric wedge socket

BSI BS EN 13509 Cathodic protection measurement techniques-CORR 14827: December 1, 2003;

BSI BS EN 13599

Copper and copper alloys Copper plate, sheet and strip for electrical purposes-Supersedes BS 4608: 1970;

BSI BS EN 13600

Copper and Copper Alloys Seamless Copper Tubes for Electrical Purposes-Supersedes BS 1977: 1976;

BSI BS EN 13601

Copper and Copper Alloys - Copper Rod, Bar and Wire for General Electrical Purposes-Supersedes BS 1432: 1987 and BS 1433: 1970;

BSI BS EN 1371- 1

Founding - Liquid Penetrant Inspection Part 1: Sand, Gravity Die and Low Pressure Die Castings-Supersedes BS 4080: Part 2: 1989;

BSI BS EN 13986

Wood-based panels for use in construction Characteristics, evaluation of conformity and marking

BSI BS EN 1449Plastics Piping Systems - Glass Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Cemented Socket-and-Spigot Joints-Also Known as BS 2782: Part 12: Method 1224C: 1997;

BSI BS EN 1561 Founding - Grey Cast Irons-Supersedes BS 1452: 1990;

BSI BS EN 1563 Founding - Spheroidal graphite cast irons-AMD 14004: November 1, 2002; Supersedes BS 2789: 1985;

BSI BS EN 1652Corr.1 Copper and Copper Alloys - Plate, Sheet, Strip and Circles for General Purposes-CORR 10198; September 15, 1998; Together with BS EN 1653: 1998 and BS EN 1654: 1998, it Supersedes BS 2870: 1980 and BS 2875: 1969;

BSI BS EN 1653Copper and copper alloys Plate, sheet and circles for boilers, pressure vessels and hot water storage units-AMD 12044: May 2001; Together with BS EN 1652: 1998 and BS EN 1654: 1998, it supersedes BS 2870: 1980 and BS 2875: 1969;

BSI BS EN 1654 Copper and copper alloys Strip for springs and connectors-CORR 14412: March 27, 2003; Together with BS EN 1652:1998 and BS EN 1653:1998 it supersedes BS 2870:1980;

BSI BS EN 1676 Aluminium and Aluminium Alloys - Alloyed Ingots for Remelting - Specifications-Partially Supersedes BS 1490: 1988;

BSI BS EN 1706 Aluminium and Aluminium Alloys - Castings - Chemical Composition and Mechanical

Properties-Partially Supersedes BS 1490:1988;

BSI BS EN 1811 Reference Test Method for Release of Nickel from Products Intended to Come into Direct and Prolonged Contact with the Skin

BSI BS EN 1976 Copper and copper Alloys - Cast Unwrought Copper Products-Together with BS EN 1978:1998 Supersedes BS 6017:1981

BSI BS EN 1982 Copper and Copper Alloys - Ingots and Castings-Supersedes BS 1400: 1985 and DD 187: 1990;

BSI BS EN 2004- 1

Test Methods for Aluminium and Aluminium Alloy Products Part 1: Determination of Electrical Conductivity of Wrought Aluminium Alloys (V)

BSI BS EN 27963

Calibration Block No. 2 for Ultrasonic Examination of Welds-Together with BS EN 12223: 2000, Supersedes BS 2704: 1978; ISO 7963: 1985;

BSI BS EN 336 Structural timber - Sizes, permitted deviations-CORR 14533: July 2, 2003;

BSI BS EN 384 Structural timber Determination of characteristic values of mechanical properties and density

BSI BS EN 485- 1

Aluminium and Aluminium Alloys - Sheet, Strip and Plate Part 1: Technical Conditions for Inspection and Delivery (V)

BSI BS EN 485- 2 Aluminium and Aluminium Alloys - Sheet, Strip and Plate Part 2: Mechanical Properties

BSI BS EN 485- 3

Aluminium and aluminium alloys Sheet, strip and plate Part 3: Tolerances on dimensions and form for hot-rolled products

BSI BS EN 485- 4

Aluminium and Aluminium Alloys - Sheet, Strip and Plate Part 4: Tolerances on Shape and Dimensions for Cold-Rolled Products (V)

BSI BS EN 515 Aluminium and Aluminium Alloys - Wrought Products - Temper Designations (V)

BSI BS EN 546- 1

Aluminium and Aluminium Alloys - Foil - Part 1: Techinical Conditions for Inspection and Delivery

BSI BS EN 573- 1

Aluminium and aluminium alloys Chemical composition and form of wrought products Part 1: Numerical designation system

BSI BS EN 573- 2

Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 2: Chemical Symbol Based Designation System (V)

BSI BS EN 573- 3

Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition

BSI BS EN 573- 4

Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 4: Forms of products

BSI BS EN 586- 2

Aluminium and Aluminium Alloys - Forgings Part 2: Mechanical Properties and Additional Property Requirements (V)

BSI BS EN 60320- 1

Appliance Couplers for Household and Similar General Purposes Part 1: General Requirements

BSI BS EN 60534- 1

Industrial-process control valves Part 1: Control valve terminology and general considerations-CORR 15662: April 19, 2005

BSI BS EN 60751 Industrial Platinum Resistance Thermometer Sensors (IEC 751: 1983) (V)

BSI BS EN 61212-3- 1

Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Round Laminated Rolled Tubes (V)

BSI BS EN 736- 1 Valves - Terminology Part 1: Definition of Types of Valves (V)

BSI BS EN 736- 3 Valves - Terminology - Part 3: Definition of terms-AMD 14094: October 24, 2002;

BSI BS EN 754- 1

Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 1: Technical Conditions for Inspection and Delivery

BSI BS EN 754- 2

Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 2: Mechanical Properties

BSI BS EN 754- 7

Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 7: Seamless Tubes, Tolerances on Dimensions and Form-Supersedes BS 1471: 1972;

BSI BS EN 754- 8

Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 8: Porthole Tubes, Tolerances on Dimensions and Form-Supersedes BS 1471: 1972;

BSI BS EN 755- 1

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles Part 1: Technical Conditions for Inspection and Delivery

BSI BS EN 755- 2

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles Part 2: Mechanical Properties-CORR 10035: June 1998; Supersedes BS 1474: 1987, BS 4300/12: 1969, BS 4300/15: 1973, BS 4300/4: 1973 and BS 4300/5: 1973;

BSI BS EN 755- 3

Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles Part 3: Round Bars, Tolerances on Dimensions and Form (V)

BSI BS EN 755- Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles Part 4: Square

4 Bars, Tolerances on Dimensions and Form (V)

BSI BS EN 755- 5

Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles - Part 5: Rectangular Bars, Tolerances on Dimensions and Form (V)

BSI BS EN 755- 6

Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles - Part 6: Hexagonal Bars, Tolerances on Dimensions and Form (V)

BSI BS EN 755- 7

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 7: Seamless Tubes, Tolerances on Dimensions and Form

BSI BS EN 755- 8

Aluminium and Aluminium Alloys - Extruded Rod/Bar; Tube and Profiles - Part 8: Porthole Tubes, Tolerances on Dimensions and Form

BSI BS EN 755- 9

Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 9: Profiles, Tolerances on Dimensions and Form-CORR 13301:July 2001; Together with BS EN 515:1993, BS EN 573-3 and -4:1995, BS EN 755-1 and -2:1997, BS EN 755-3 Thru - 6:1996, B

BSI BS EN 764- 1

Pressure equipment Part 1: Terminology Pressure, temperature, volume, nominal size-Supersedes BS EN 764:1995

BSI BS EN ISO 1043- 1

Plastics - Symbols and Abbreviated Terms - Part 1: Basic Polymers and Their Special Characteristics-CORR 13827: April 02, 2002; ISO 1043-1: 2001;

BSI BS EN ISO 10993- 10

Biological evaluation of medical devices - Part 10: Tests for irritation and delayed-type hypersensitivity-CORR 14275: December 20, 2002;

BSI BS EN ISO 11124- 1

Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives Part 1: General Introduction and Classification-AMD 9589: September 1997; Renumbers BS 7079: Part E1: 1994

BSI BS EN ISO 11124- 2

Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives Part 2: Chilled-Iron Grit-AMD 9721: November 1997; Renumbers as BS 7079: Part E2: 1994

BSI BS EN ISO 11124- 3

Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives Part 3: High-Carbon Cast-Steel Shot and Grit-AMD 9722: November 1997; Renumbers BS 7079: Part E3: 1994; Partially S

BSI BS EN ISO 11126- 1

Preparation of Steel Substrates Before Application of Paints and Related Products Group F: Non-Metallic Blast Cleaning Abrasives Part F1: General Introduction and Classification-Supersedes BS 7079 Part F1:1994; Also Known as BS 7079 Part F1:1997

BSI BS EN ISO 11126- 10

Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 10: Almandite garnet- AMD 15511:February 2, 2005; Renumbers BS 7079-F10:2000; Also known as BS 7079- F10:200

BSI BS EN ISO Preparation of steel substrates before application of paints and related products

11126- 3 Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag- AMD 9843: February 1998; Renumbers as BS 7079-F3: 1994

BSI BS EN ISO 11127- 1

Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling-AMD 9846: February 1998; Renumbers BS 7079-F11: 1994

BSI BS EN ISO 1133

Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

BSI BS EN ISO 11357- 1 Plastics - Differential Scanning Calorimetry (DSC) Part 1: General Principles

BSI BS EN ISO 11469

Plastics - Generic Identification and Marking of Plastics Products- Supersedes BS 7746: 1994;

BSI BS EN ISO 1183- 1

Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method-CORR 15108: April 8, 2004;

BSI BS EN ISO 12737 Metallic materials Determination of plane-strain fracture toughness

BSI BS EN ISO 13000- 1

Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 1: Requirements and designation

BSI BS EN ISO 14130

Fibre-reinforced plastic composites Determination of apparent interlaminar shear strength by short-beam method-CORR 15091: May 7, 2004

BSI BS EN ISO 178 Plastics - Determination of flexural properties-CORR 14450: April 9, 2003;

BSI BS EN ISO 180 Plastics - Determination of Izod Impact Strength

BSI BS EN ISO 18265

Metallic materials Conversion of hardness values-CORR 14919: December 23, 2003; Supersedes BS 860: 1967;

BSI BS EN ISO 2398

Rubber Hose, Textile-Reinforced, for Compressed Air - Specification- AMD 9704: December 1997; Renumbers BS ISO 2398: 1995

BSI BS EN ISO 2440

Flexible and Rigid Cellular Polymeric Materials - Accelerated Ageing Tests-Partially Supersedes BS 4443-4: 1989;

BSI BS EN ISO 2566- 1

Steel - Conversion of Elongation Values - Part 1: Carbon and Low Alloy Steels-Supersedes BS 3894-1:1965;

BSI BS EN ISO 2566- 2

Steel - Conversion of Elongation Values - Part 2: Austenitic Steels- Supersedes BS 3894-2: 1985;

BSI BS EN ISO 2639

Steels Determination and verification of the depth of carburized and hardened cases-CORR 14310: January 22, 2003; Supersedes BS 6479: 1984;

BSI BS EN ISO 3651- 2

Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 2: Ferritic, Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels - Corrosion Test in Media Containing Sulfuric Acid-Supersedes BS 5903: 1980;

BSI BS EN ISO 376

Metallic materials Calibration of force-proving instruments used for the verification of uniaxial testing machines

BSI BS EN ISO 377

Steel and Steel Products - Location and Preparation of Samples and Test Pieces for Mechanical Testing

BSI BS EN ISO 472

Plastics - Vocabulary-AMD 13329: 10/31/2001; Renumbers BS ISO 472:1999; ISO 472:1999

BSI BS EN ISO 4892- 1

Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance-AMD 13148: 9/17/2001; Renumbers BS 2782-5: Method 540D: 1999

BSI BS EN ISO 4892- 2

Plastics - Methods of Exposure of Laboratory Light Sources - Part 2: Xenon Arc Sources-AMD 10725: April 2000; Renumbers BS 2782-5: Method 540E: 1995

BSI BS EN ISO 4892- 3

Plastics - Methods of Exposure to Laboratory Light Sources - Part 3: Fluorescent UV Lamps-AMD 10678: 6/2000; Renumbers BS 2782-5: Method 540F: 1995

BSI BS EN ISO 4957 Tool Steels-Supersedes BS 4659:1989

BSI BS EN ISO 527- 1

Plastics - Determination of Tensile Properties Part 1: General Principles- AMD 8633: July 15, 1996; Also Known as BS 2782-3:METH 321:1994; ISO 527-1: 1993

BSI BS EN ISO 527- 2

Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics-AMD 8639: November 15, 1996; Renumbers BS 2782PT3: METH 322:1994; Together with BS 2782: Method 321: 1993 Partially Supersedes Methods 320A and

BSI BS EN ISO 527- 3

Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets-CORR 13253: August 2001; CORR 15005: March 16, 2004; Supersedes BS 2782: Part 3: Methods 326A to 326C: 1977; Also Known as BS 2782-3 Method 326E

BSI BS EN ISO 527- 4

Plastics - Determination of Tensile Properties Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites-Also Numbered as BS 2782: PT 3: METH 326F: 1997;

BSI BS EN ISO 527- 5

Plastics - Determination of Tensile Properties Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites-Also Numbered as BS 2782: PT 3: METH 326G: 1997;

BSI BS EN ISO Metallic Materials - Brinell Hardness Test - Part 1: Test Method

6506- 1

BSI BS EN ISO 6506- 2

Metallic Materials - Brinell Hardness Test - Part 2: Verification and calibration of testing machines

BSI BS EN ISO 6506- 3 Metallic Materials - Brinell Hardness Test - Part 3: Calibration of Reference Blocks

BSI BS EN ISO 6507- 1 Metallic Materials - Vickers Hardness Test Part 1: Test Method

BSI BS EN ISO 6507- 2

Metallic Materials - Vickers Hardness Test - Part 2: Verification of Testing Machines-CORR 10544; April 2000; Together with BS EN ISO 6507-1: 1998 and BS EN ISO 6507-3: 1997, Supersedes BS 427: 1990;

BSI BS EN ISO 6507- 3

Metallic Materials - Vickers Hardness Test - Part 3: Calibration of Reference Blocks-CORR 10545: April 2000; Together with BS EN ISO 6507-1: 1998 and BS EN ISO 6507-2: 1998, Supersedes BS 427: 1990;

BSI BS EN ISO 6508- 1

Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)

BSI BS EN ISO 6508- 2

Metallic Materials - Rockwell Hardness Test - Part 2: Verification and Calibration of Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)

BSI BS EN ISO 6508- 3

Metallic materials Rockwell hardness test Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)

BSI BS EN ISO 683- 17

Heat-Treated Steels, Alloy Steels and Free-Cutting Steels - Part 17: Ball and Roller Bearing Steels

BSI BS EN ISO 7438 Metallic materials - Bend test

BSI BS EN ISO 7500- 1

Metallic materials Verification of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibration of the force-measuring system

BSI BS EN ISO 75- 1 Plastics Determination of temperature of deflection under load Part 1: General test method

BSI BS EN ISO 75- 2

Plastics Determination of temperature of deflection under load Part 2: Plastics, ebonite and long-fibre-reinforced composites

BSI BS EN ISO 7539- 6

Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement-CORR 14438:April 4, 2003;

BSI BS EN ISO 7799 Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test

BSI BS EN ISO 8502- 2

Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 2: Laboratory determination of chloride on cleaned surfaces

BSI BS EN ISO 8502- 3

Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for Surface Cleanliness - Part 3: Assessment of Dust on Steel Surface Prepared for Painting (Pressure-Sensitive Tape Method)-AMD 10701: June 2000; Renumbers BS 70

BSI BS EN ISO 8502- 4

Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application-AMD 10700: June 2000;

BSI BS EN ISO 8502- 5

Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)-Also known as BS 707

BSI BS EN ISO 8502- 6

Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 6: Extraction of Soluble Contaminants for Analysis - The Bresle Method-AMD 10698: June 2000; Renumbers BS 7079- B6

BSI BS EN ISO 8502- 9

Preparation of Steel Substrates Before Application of Paints and Related Products - Group B: Methods for the Assessment of Surface Cleanliness - Part B9: Field Method for the Conductometric Determination of Water-Soluble Salts-AMD 12095:June 2001; Renu

BSI BS EN ISO 8503- 1

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abr

BSI BS EN ISO 8503- 2

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast - Cleaned Steel Substrates Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Pro

BSI BS EN ISO 8503- 3

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates Part 3: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of

BSI BS EN ISO 8503- 4

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of S

BSI BS EN ISO 8504- 1

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 1: General Principles-AMD 13360: October 19, 2001; Renumbers BS 7079-D1:2000

BSI BS EN ISO 8504- 2

Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 2: Abrasive Blast-Cleaning-AMD 13361: October 19, 2001; Renumbers BS 7079-D2:2000

BSI BS EN ISO 8504- 3

Preparation of Steel Substrates Before Application of Paints and Related Products - Part 3: Hand - and Power-Tool Cleaning-AMD 13357: October 17, 2001; Renumbers BS 7079-D3:1993

BSI BS EN ISO 868

Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)-CORR 14577; July 11, 2003;

BSI BS ISO 11357- 2

Plastics - Differential Scanning Calorimetry (DSC) - Part 2: Determination of Glass Transition Temperature

BSI BS ISO 1431- 3

Rubber, Vulcanized or Thermoplastic - Resistance to Ozone Cracking - Part 3: Reference and Alternative Methods for Determining the Ozone Concentration in Laboratory Test Chambers-Also Known as BS 903-A45:2000

BSI BS ISO 1629 Rubbers and Latices - Nomenclature (V)

BSI BS ISO 1817

Rubber, Vulcanized - Determination of the Effect of Liquids-Also Known as BS 903-A16:1999; Supersedes BS 903: Part A16: 1987;

BSI BS ISO 188Rubber, Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests-CORR 14802: November 26, 2003; Supersedes BS 903-A19:1986; Also Known as BS 903-A19:1998

BSI BS ISO 2230 Rubber Products - Guidelines for Storage-Supersedes BS 3574: 1989;

BSI BS ISO 3977- 2 Gas turbines Procurement Part 2: Standard reference conditions and ratings

BSI BS ISO 5893

Rubber and Plastics Test Equipment Tensile, Flexural and Compression Types (Constant Rate of Traverse) Specification-Supersedes BS 5214-1: 1995;

BSI DD ENV 10080

Steel for the Reinforcement of Concrete - Weldable Ribbed Reinforcing Steel B500 - Technical Delivery Conditions for Bars, Coils and Welded Fabric (V)

BSI DD ENV ISO 8502- 1

Preparation of Steel Substrates before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 1: Field Test for Soluble Iron Corrosion Products-AMD 10892: March 2001; Renumbers DD 207: 1992

BSI PD 6525 PART 1

Elevated Temperature Properties for Steels for Pressure Purposes Part 1: Stress Rupture Properties-AMD 8802: December 15, 1995

BSI PD 970Wrought steels for mechanical and allied engineering purposes Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels- CORR 15637: May 18, 2005

BSI - Metrology, Packaging and Print Collection

Popular Standards from this Collection.

BSI BS 1041- 2.1

Temperature measurement Part 2: Expansion thermometers Section 2.1 Guide to selection and use of liquid-in-glass thermometers

BSI BS 1041- 2.2

Temperature Measurement Part 2: Expansion Thermometers Section 2.2: Guide to Selection and Use of Dial-Type Expansion Thermometers

BSI BS 1041- 3

Temperature Measurement Part 3: Guide to Selection and Use of Industrial Resistance Thermometers

BSI BS 1041- 4

Temperature Measurement Part 4: Guide to the Selection and Use of Thermocouples-AMD 7408; December 15, 1992

BSI BS 1041- 5

Temperature Measurement Part 5: Guide to Selection and Use of Radiation Pyrometers (AMD 8238) November 15, 1994 (H)-Amd 1;

BSI BS 1041- 7

Temperature Measurement Part 7: Guide to Selection and Use of Temperature/Time Indicators

BSI BS 1044- 1 Gauge Blanks Part 1: Plug, Ring and Caliper Gauges

BSI BS 1133 SEC 12

Packaging Code Section 12: Methods of Protection Against Shock (Excluding Cushioning Devices)

BSI BS 1133 SEC 1- 3 Packaging Code Section 1-3: Introduction to Packaging

BSI BS 1133 SEC 14 Packaging Code Section 14: Adhesive Closing and Sealing Tapes

BSI BS 1133 SEC 15 Packaging Code Section 15: Tensional Strapping

BSI BS 1133 SEC 19 Packaging Code Section 19: Use of Desiccants in Packaging

BSI BS 1133 SEC 22 Packaging Code Section 22: Packaging in Plastics Containers

BSI BS 1133 SEC 4

Packaging Code Section 4: Mechanical Aids in Package Handling- Supersedes BS 1133: Part 4: Section 4: 1965;

BSI BS 1133 SEC 5

Packaging Code Section 5: Protection Against Spoilage of Packages and Their Contents by Micro-Organisms, Insects, Mites and Rodents

BSI BS 1133 SEC 7.1

Packaging Code Section 7: Paper and Board Wrappers, Bags and Containers: Section 7.1: Wrapping Papers

BSI BS 1133 SEC 8 Packaging Code Section 8: Wooden Boxes, Cases and Crates

BSI BS 1133 SUBSEC 10.2 Packaging Code Section 10: Metal Containers Subsection 10.2: Metal Drums

BSI BS 1133 SUBSEC 6.1

Packaging Code Section 6: Protection of Metal Surfaces Against Corrosion During Transport and Storage Subsection 6.1: Cleaning and Drying of Metal Surfaces

BSI BS 1133 SUBSEC 6.2

Packaging Code Section 6: Protection of Metal Surfaces Against Corrosion During Transport and Storage Subsection 6.2: Temporary Protectives and Their Application

BSI BS 1133 SUBSEC 7.2

Packaging Code Section 7: Paper and Board Wrappers, Bags and Containers Subsection 7.2: Bags and-AMD 7215: August 15, 1992;

BSI BS 1133 SUBSEC 7.3

Packaging Code Section 7: Paper and Board Wrappers, Bags and Containers Subsection 7.3: Cartons and Boxes

BSI BS 1133 SUBSEC 7.5

Packaging Code Section 7: Paper and Board Wrappers, Bags and Containers Subsection 7.5: Fibreboard Cases and Fitments

BSI BS 1134- 1 Method for the Assessment of Surface Texture Part 1: Method and Instrumentation

BSI BS 1134- 2 Method for the Assessment of Surface Texture Part 2: General Information and Guidance

BSI BS 1153 Processing and Storage of Silver-Gelatin-Type Microfilm-Replaces BS 5706: 1979;

BSI BS 122- 1 Milling Cutters Part 1: Milling Cutters-Amd 4;

BSI BS 1339- 3 Humidity Part 3: Guide to the measurement of humidity

BSI BS 1347 ArchitectsÁµ, EngineersÁµ and SurveyorsÁµ Metric Scale Rules

BSI BS 1564 Pressed Steel Sectional Rectangular Tanks-Amd 1;

BSI BS 1583 One-Mark Pipettes-AMD 7388: January 15, 1993;

BSI BS 1647- 1

pH measurement Part 2: Specification for reference value standard solutions and operational reference standard solutions-AMD 5566: May 1987

BSI BS 1702 Mild Steel Drums (Heavy Duty-Fixed Ends)-Amd 1;

BSI BS 1790 1961 Length Bars and Their Accessories (Accessories Have Been Replaced by BS 5317 : 1976)-AMD 1957: April 30, 1976

BSI BS 1794 Chart Ranges for Temperature Recording Instruments

BSI BS 1916 PART 3

Limits and Fits for Engineering Part 3: Recommendations for Tolerances, Limits, and Fits for Large Diameters-Amd 2;

BSI BS 2003 Mild Steel Drums (Light Duty; Removable Heads)-AMD 5580: December 23, 1987 ; Partially Replaced by BS 2003: Part 1: 1987;

BSI BS 2646 PART 1

Autoclaves for Sterilization in Laboratories Part 1: Specification for Design, Construction, Safety and Performance-Supersedes BS 2646: 1955;

BSI BS 2646 PART 2 Autoclaves for Sterilization in Laboratories Part 2: Guide to Planning and Installation

BSI BS 2646 PART 3 Autoclaves for Sterilization in Laboratories Part 3: Guide to Safe Use and Operation

BSI BS 2646 PART 4 Autoclaves for Sterilization in Laboratories Part 4: Guide to Maintenance

BSI BS 2648 Performance Requirements for Electrically-Heated Laboratory Drying Ovens-AMD PD 2517: June 29, 1956

BSI BS 2775 Rubber Stoppers and Tubing for General Laboratory Use

BSI BS 2842 Whirling Hygrometer (H)

BSI BS 2922 PART 2

Strength of Wet Paper and Board Part 2: Determination of the Tensile Strength of Paper and Board After Immersion in Water-AMD 6514: December 1990; ISO 3781: 1983;

BSI BS 3137 Methods for Determining the Bursting Strength of Paper and Board

BSI BS 3202- 2

Laboratory Furniture and Fittings - Part 2: Specification for Performance- CORR 13430:April 8,2002; Partially Superseded by BS EN 13150:2001;

BSI BS 3441 Tanks for the Transport of Milk and Liquid Milk Products-AMD 9828; January 15, 1998;

BSI BS 3509 Spirit Level Vials

BSI BS 358 Measurement of Voltage with Sphere-Gaps (One Sphere Earthed)-Amd 1;

BSI BS 3887 Specification for Pressure Sensitive Adhesive Closing and Sealing Tapes (H)

BSI BS 3895 Guide to the Design, Testing and Use of Packaging for the Safe Transport of Radioactive Materials

BSI BS 410- 1 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth-Together with BS 410-2 Supersedes BS 410: 1986; CORR 15726: December 5, 2005

BSI BS 410- 2 Test Sieves - Technical Requirements and Testing - Part 2: Test Sieves of Perforated Metal Plate-This Standard Together with BS 410-1 Supersedes BS 410: 1986; ISO 3310-2: 1999;

BSI BS 4311 PART 2 Gauge Blocks and Accessories Part 2: Accessories (H)

BSI BS 4311 PART 3

Gauge Blocks and Accessories Part 3: Gauge Blocks in Use (AMD 8695) July 15, 1995 (H)-Amd 1;

BSI BS 4500 PART 4

ISO Limits and Fits Part 4: System of Cone (Taper) Fits for Cones from C = 1:3 to 1:500, Lengths from 6 mm to 630 mm and Diameters up to 500 mm (H)

BSI BS 4500 PART 5

ISO Limits and Fits Part 5: System of Cone Tolerances for Conical Work Pieces From C = 1: 3 to 1:500 and Lengths from 6 mm to 630 mm (H)

BSI BS 4500A Data Sheet: Selected ISO Fits, Hole Basis (H)

BSI BS 4500B Data Sheet: Selected ISO Fits, Shaft Basis (H)-Amd 1;

BSI BS 4839 PART 1 Blow Moulded Polyolefin Containers Part 1: Containers up to 5 Litre Capacity

BSI BS 5167 Packages for Washing and Cleaning Powders. Dimensions and Volumes of Cartons and Drums from Fibreboard

BSI BS 5204 PART 2 Straightedges Part 2: Steel or Granite Straightedges of Rectangular Section-Amd 1;

BSI BS 5233 Glossary of Terms Used in Metrology-AMD 9917; March 1998; Incorporating BS 2643;

BSI BS 5248 Aspirated hygrometer-AMD 7383: January 1993;

BSI BS 5339 Measurement of Colour in Hazen Units (Platinum- Cobalt Scale) of Liquid Chemical Products

BSI BS 593 Laboratory Thermometers

BSI BS 5S 100 Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)-AMD 13966: March 21, 2003; Revision and Superseding BS 4S 100:1975;

BSI BS 6169 PART 1

Volumetric Measurement of Liquid Hydrocarbons Part 1: Displacement Meter Systems (Other Than Dispensing Pumps)

BSI BS 6169 PART 2 Volumetric Measurement of Liquid Hydrocarbons Part 2: Turbine Meter Systems

BSI BS 6450 PART 1

Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators Part 1: Specification for general requirements

BSI BS 6498 Guide to Preparation of Microfilm and Other Microforms That May Be Required as Evidence

BSI BS 658 Apparatus for the Determination of Distillation Range (Including Flasks and Receivers)

BSI BS 6615 Dimensional Tolerances for Metal and Metal Alloy Castings (ISO 8062: 1994) (H)

BSI BS 667 Illuminance meters Requirements and test methods

BSI BS 6923 Calculation of Small Colour Differences

BSI BS 718 Density Hydrometers (H)

BSI BS 7195 Guide for Prevention of Corrosion of Metals Caused by Vapours from Organic Materials

BSI BS 7258 PART 1 Laboratory Fume Cupboards Part 1: Specification for Safety and Performance (H)

BSI BS 7258 PART 2

Laboratory Fume Cupboards Part 2: Recommendations for the Exchange of Information and Recommendations for Installation (Read in Conjunction with BS 7258: Pt 6) (H)

BSI BS 7258 PART 3

Laboratory Fume Cupboards Part 3: Recommendations for Selection, Use and Maintenance (Read in Conjunction with BS 7258: Pt 1) (H)

BSI BS 7258 PART 4

Laboratory Fume Cupboards Part 4: Method for Determination of the Containment Value of a Laboratory Fume Cupboard (H)

BSI BS 7385 PART 1

Evaluation and Measurement of Vibration in Buildings Part 1: Guide for Measurement of Vibrations and Evaluation of Their Effects on Buildings

BSI BS 7385 PART 2

Evaluation and Measurement for Vibration in Buildings Part 2: Guide to Damage Levels from Groundborne Vibration

BSI BS 7445 PART 2

Description and Measurement of Environmental Noise Part 2: Guide to the Acquisition of Data Pertinent to Land Use (H)

BSI BS 7445 PART 3

Description and Measurement of Environmental Noise Part 3: Guide to Application to Noise Limits (H) (ISO 1996-3: 1987)

BSI BS 7445- 1

Description and measurement of environmental noise Part 1: Guide to quantities and procedures

BSI BS 7621 Method for Calibrating Field Pyranometers by Comparison to a Reference Pyranometer (ISO 9847: 1992) (H)

BSI BS 7645 Code for Designation of Colours-IEC 757:1983

BSI BS 7882 Method for Calibration and Classification of Torque Measuring Devices- AMD 9834; March 15, 1998;

BSI BS 791 Solid-stem calorimeter thermometers

BSI BS 7951 Electricity Meters - Alternating-Current Single-Phase Static Watt-Hour Telemeters of Accuracy Class 1 or 2

BSI BS 7965 The Selection, Installation, Operation and Calibration of Diagonal Path Transit Time Ultrasonic Flowmeters for Industrial Gas Applications

BSI BS 7976- 1 Pendulum Testers - Part 1: Specification

BSI BS 7976- 2 Pendulum Testers - Part 2: Method of Operation

BSI BS 8422 Force measurement Strain gauge load cell systems Calibration method

BSI BS 8452 Use of clamp-on (externally mounted) transit time metering techniques for liquid applications Guide

BSI BS 870 External Micrometers-Amd 3;

BSI BS 907 Dial Gauges for Linear Measurement

BSI BS 939 EngineersÁµ Squares (Including Cylindrical and Block Squares)-Amd 1;

BSI BS 950 PART 1

Artificial Daylight for the Assessment of Colour Part 1: Illuminant for Colour Matching and Colour Appraisal

BSI BS 950 PART 2

Artificial Daylight for the Assessment of Colour Part 2: Viewing Conditions for Reproduction in the Graphic Arts-Amd 1;

BSI BS 957 PART 1 Feeler Gauges Part 1: Inch Units (Formerly BS 957: 1941)-Amd 3;

BSI BS 957 PART 2 (FAULTY STANDARD) 1969 Feeler Gauges Part 2: Metric Units

BSI BS 959 Internal Micrometers (Including Stick Micrometers)-Amd 1;

BSI BS EN 1104

Paper and board intended to come into contact with foodstuffs Determination of the transfer of antimicrobial constituents

BSI BS EN 12128

Biotechnology - Laboratories for Research, Development and Analysis - Containment Levels of Microbiology Laboratories, Areas of Risk, Localities and Physical Safety Requirements

BSI BS EN 12245 Transportable Gas Cylinders - Fully Wrapped Composite Cylinders

BSI BS EN 12261

Gas Meters - Turbine Gas Meters-CORR 14862: December 29, 2003; Supersedes BS 4161-6: 1987;

BSI BS EN 12300 Cryogenic Vessels - Cleanliness for Cryogenic Service

BSI BS EN 1230- 1 Paper and Board Intended for Contact with Foodstuffs - Sensory Analysis - Part 1: Odour

BSI BS EN 1230- 2

Paper and board intended for contact with foodstuffs Sensory analysis Part 2: Off-flavour (taint)-CORR 15444:November 22, 2004

BSI BS EN 12347 Biotechnology - Performance Criteria for Steam Sterilizers and Autoclaves

BSI BS EN 1251- 1

Cryogenic Vessels - Transportable Vacuum Insulated Vessels of Not More Than 1 000 Litres Volume - Part 1: Fundamental Requirements

BSI BS EN 1251- 2

Cryogenic Vessels - Transportable Vacuum Insulated Vessels of Not More Than 1 000 Litres Volume - Part 2: Design, Fabrication, Inspection and Testing

BSI BS EN 1252- 1

Cryogenic vessels Materials Part 1: Toughness requirements for temperatures below p80 ÁøC-CORR 14638: September 11, 2003;

BSI BS EN 1252- 2

Cryogenic Vessels - Materials - Part 2: Toughness Requirements for Temperatures between -80 Degrees C and -20 Degrees C

BSI BS EN 12573- 1 Welded Static Non-Pressurized Thermoplastic Tanks - Part 1: General Principles

BSI BS EN 12573- 2

Welded Static Non-Pressurized Thermoplastic Tanks - Part 2: Calculation of Vertical Cylindrical Tanks

BSI BS EN 12573- 3

Welded Static Non-Pressurized Thermoplastic Tanks - Part 3: Design and Calculation for Single Skin Rectangular Tanks

BSI BS EN 12619

Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method

BSI BS EN 12668- 1

Non-destructive testing Characterization and verification of ultrasonic examination equipment Part 1: Instruments-AMD 15222:August 19, 2004; Supersedes BS 4331-2:1972

BSI BS EN 12668- 2

Non-destructive testing Characterization and verification of ultrasonic examination equipment Part 2: Probes-AMD 15290:August 25, 2004; Supersedes BS 4331- 3:1974

BSI BS EN 12668- 3

Non-destructive testing Characterization and verification of ultrasonic examination equipment Part 3: Combined equipment-AMD 15291:August 20, 2004; Supersedes BS 4331-1:1978

BSI BS EN 12862

Transportable Gas Cylinders - Specification for the Design and Construction of Refillable Transportable Welded Aluminium Alloy Gas Cylinders-CORR 12003: October 2000; Supersedes BS 5045-5:1986;

BSI BS EN 13032- 1

Light and lighting Measurement and presentation of photometric data of lamps and luminaires Part 1: Measurement and file format-Supersedes BS 354:1995; Together with BS 667:2005 Supersedes BS 667:1996; Together with BS 7920:2005 Supersedes BS 7920:19

BSI BS EN 13068- 1

Non-Destructive Testing - Radioscopic Testing - Part 1: Quantitative Measurement of Imaging Properties

BSI BS EN 13068- 3

Non-Destructive Testing - Radioscopic Testing - Part 3: General Principles of Radioscopic Testing of Metallic Materials by X- and Gamma Rays

BSI BS EN 13096

Transportable gas cylinders Conditions for filling gases into receptacles Single component gases

BSI BS EN 13150

Workbenches for Laboratories - Dimensions, Safety Requirements amd Test Methods-Partially Supersedes BS 3202-2:1991;

BSI BS EN 13190 Dial Thermometers-AMD 15308: August 10, 2004; Supersedes BS 5235:1975

BSI BS EN 13202

Ergonomics of the Thermal Environment - Temperatures of Touchable Hot Surfaces - Guidance for Establishing Surface Temperature Limit Values in Production Standards with the Aid of EN 563

BSI BS EN 13275 Cryogenic Vessels - Pumps for Cryogenic Service

BSI BS EN 13284- 1

Stationary Source Emissions - Determination of Low Range Mass Concentration of Dust - Part 1: Manual Gravimetric Method

BSI BS EN 13284- 2

Stationary source emissions Determination of low range mass concentration of dust Part 2: Automated measuring systems

BSI BS EN 13293

Transportable gas cylinders Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1

BSI BS EN 13311- 3 Biotechnology - Performance Criteria for Vessels - Part 3: Glass Pressure Vessels

BSI BS EN 13322- 1

Transportable gas cylinders Refillable welded steel gas cylinders Design and construction Part 1: Carbon steel-Partially supersedes BS 5045-2:1989;

BSI BS EN 13427

Packaging Requirements for the use of European Standards in the field of packaging and packaging waste

BSI BS EN 13428

Packaging Requirements specific to manufacturing and composition Prevention by source reduction

BSI BS EN 13429 Packaging Reuse

BSI BS EN 13430 Packaging Requirements for packaging recoverable by material recycling

BSI BS EN 13431

Packaging Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value

BSI BS EN 13432

Packaging - Requirements for Packaging Recoverable Through Composting and Biodegradation - Test Scheme and Evaluation Criteria for the Final Acceptance of Packaging

BSI BS EN 13628- 1

Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods

BSI BS EN 13649

Stationary Source Emission - Determination of the Mass Concentration of Individual Gaseous of Individual Gaseous Organic Compounds - Activated Carbon and Solvent Desorption Method

BSI BS EN 13769 Transportable gas cylinders Cylinder bundles Design, manufacture, identification and testing

BSI BS EN 13860- 1

Non destructive testing Eddy current examination Equipment characteristics and verification Part 1: Instrument characteristics and verification

BSI BS EN 1388- 1

Materials and articles in contact with foodstuffs Silicate surfaces Part 1: Determination of the release of lead and cadmium from ceramic ware

BSI BS EN 1388- 2

Materials and articles in contact with foodstuffs Silicate surfaces Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware

BSI BS EN 13952 LPG cylinders Filling procedures

BSI BS EN 14127 Non-destructive testing Ultrasonic thickness measurement

BSI BS EN 1432

Swap Bodies - Swap Tanks - Dimensions, Requirements, Test Methods, Operation Conditions

BSI BS EN 1434- 1

Heat Meters - Part 1: General Requirements-AMD 14221: March 5, 2003; The Six Parts of BS EN 1434 Supersede BS 7234, Parts 1, 2, and 3;

BSI BS EN 1442

Transportable Refillable Welded Steel Cylinders for Liquefied Petroleum Gas (LPG) - Design and Construction-AMD 13626: June 25, 2002;

BSI BS EN 14427

Transportable refillable fully wrapped composite cylinders for Liquefied Petroleum Gases (LPG) Design and Construction

BSI BS EN 1541

Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Formaldehyde in an Aqueous Extract

BSI BS EN 1593

Non-Destructive Testing - Leak Testing - Bubble Emission Techniques- AMD 14967: March 1, 2004

BSI BS EN 1779

Non-Destructive Testing - Leak Testing - Criteria for Method and Technique Selection-AMD 14968: February 10, 2004

BSI BS EN 1802

Transportable Gas Cylinders - Periodic Inspection and Testing of Seamless Aluminium Alloy Gas Cylinders-Supersedes BS 5430-3:1990;

BSI BS EN 1803

Transportable Gas Cylinders - Periodic Inspection and Testing of Welded Carbon Steel Gas Cylinders-Supersedes BS 5430-2:1990;

BSI BS EN 1898

Specifications for Flexible Intermediate Bulk Containers (FIBCs) For Non-Dangerous Goods-Supersedes BS 6382-1: 1993;

BSI BS EN 1915- 3

Aircraft ground support equipment General requirements Part 3: Vibration measurement methods and reduction

BSI BS EN 1920

Transportable Gas Cylinders - Cylinders for Compressed Gases (Excluding Acetylene) - Inspection at Time of Filling

BSI BS EN 1964- 1

Transportable Gas Cylinders - Specification for the Design and Construction of Refillable Transportable Seamless Steel Gas Cylinders of Water Capacities from 0,5 Litre up to and Including 150 Litres - Part 1: Cylinders Made of Seamless Steel with an Rm

BSI BS EN 1964- 2

Tranportable Gas Cylinders - Specification for the Design and Construction of Refillable Transportable Seamless Steel Gas Cylinders of Water Capacities form 0,5 Litre up to and Including 150 Litres - Part 2: Cylinders Made of Seamless Steel with an Rm

BSI BS EN 1964- 3

Transportable Gas Cylinders - Specification for the Design and Construction of Refillable Transportable Seamless Steel Gas Cylinders of Water Capacities from 0,5 Litre up to and Including 150 Litres - Part 3: Cylinders Made of Seamless Stainless Steel

BSI BS EN 1968

Transportable Gas Cylinders - Periodic Inspection and Testing of Seamless Steel Gas Cylinders-Supersedes BS 5430-1: 1990;

BSI BS EN 20286- 1

ISO System of Limits and Fits Part 1: Bases of Tolerances, Deviations and Fits (ISO 286-1: 1988) (AMD 7630) August 15, 1993 (Formerly BS 4500: Section 1.1: 1990. Replaces BS 4500: Part 1: 1969) (H)-Amd 1;

BSI BS EN 20286- 2

ISO System of Limits and Fits- Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts-AMD 7631: August 1993; ISO 286-2: 1988; Together with BS 4500-1.1, it is a revision of BS 4500-1:1969 which is withdrawn;

BSI BS EN 209 Steel Drums - Removable Head (Open Head) Drums with a Minimum Total Capacity of 210 l-Supersedes BS 2003-1: 1987;

BSI BS EN 22768- 1

General Tolerances Part 1: Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications (ISO 2768-1: 1989)

BSI BS EN 22768- 2

General Tolerances Part 2: Geometrical Tolerance for Features without Individual Tolerance Indications (ISO 2768-2: 1989)

BSI BS EN 283 Swap Bodies - Testing (H)

BSI BS EN 415- 3 Safety of Packaging Machines - Part 3: Form, Fill and Seal Machines

BSI BS EN 415- 4 Safety of Packaging Machines Part 4: Palletizers and Depalletizers

BSI BS EN 45011

General Requirements for Bodies Operating Product Certification Systems-Revision of BS 7511: 1989;

BSI BS EN 45501

Metrological Aspects of Non-Automatic Weighing Instruments (AMD 8343) October 15, 1994 (H)-Amd 1; Supersedes BS 4960:1986; Supersedes BS 6624:1985

BSI BS EN 50241- 2

Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours - Part 2: Performance Requirements for Apparatus for the Detection of Combustible Gases

BSI BS EN 50332- 1

Sound System Equipment - Headphones and Earphones Associated with Portable Audio Equipment - Maximum Sound Pressure Level Measurement Methodology and Limit Considerations - Part 1: General Method for "One Package Equipment"

BSI BS EN 50332- 2

Sound system equipment: Headphones and earphones associated with portable audio equipment Maximum sound pressure level measurement methodology and limit considerations Part 2: Matching of sets with headphones if either or both are offered separately

BSI BS EN 584- 2

Non-Destructive Testing - Industrial Radiographic Film Part 2: Control of Film Processing by Means of Reference Values

BSI BS EN 60044- 8 Instrument transformers Part 8: Electronic current transformers

BSI BS EN 60061- 3

Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges-AMD 9696:November 1997; CORR 9999:April 1998; AMD 10188:February 1999; AMD 10579:December 1999; AMD 11010:July 2001; AMD 13243:September 16, 200

BSI BS EN 60068-2- 58

Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)-CORR 15599:April 25, 2005

BSI BS EN 61010-2- 081

Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes-AMD 14902: January 14, 2004;

BSI BS EN 61032

Protection of Persons and Equipment by Enclosures - Probes for Verification-CORR 14372: June 21, 2003; Supersedes BS 3042: 1992; IEC 61032: 1997;

BSI BS EN 61194 Characteristic Parameters of Stand- Alone Photovoltaic (PV) Systems (H)

BSI BS EN 61345 UV Test for Photovoltaic (PV) Modules-IEC 61345: 1998;

BSI BS EN 61672- 1

Electroacoustics Sound level meters Part 1: Specifications-Together with BS EN 61672-2: 2003 Supersedes BS EN 60651:1994 and BS EN 60804:2001;

BSI BS EN 61672- 2

Electroacoustics Sound level meters Part 2: Pattern evaluation tests- Together with BS EN 61672-1 Supersedes BS EN 60651:1994; and BS EN 60804:2001;

BSI BS EN 61829

Crystalline Silicon Photovoltaic (PV) Array - On-Site Measurement of I-V Characteristics-IEC 61829: 1995;

BSI BS EN 62226-2- 1

Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current density and internal electric field induced in the human body Part 2-1: Exposure to magnetic fields 2D models

BSI BS EN 631- 2

Materials and Articles in Contact with Foodstuffs - Catering Containers - Part 2: Dimensions of Accessories and Supports

BSI BS EN 645 Paper and Board Intended to Come into Contact with Foodstuffs Preparation of a Cold Water Extract

BSI BS EN 646 Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Colour Fastness of Dyed Paper and Board

BSI BS EN 647 Paper and Board Intended to Come into Contact with Foodstuffs Preparation of a Hot Water Extract

BSI BS EN 648 Paper and board intended to come into contact with foodstuffs Determination of the fastness of fluorescent whitened paper and board

BSI BS EN 837- 1

Pressure Gauges Part 1: Bourdon Tube Pressure Gauges - Dimensions, Metrology, Requirements and Testing-Supersedes BS 1780: 1985;

BSI BS EN 837- 2 Pressure Gauges Part 2: Selection and Installation Recommendations for Pressure Gauges

BSI BS EN 837- 3

Pressure Gauges Part 3: Diaphragm and Capsule Pressure Gauges - Dimensions, Metrology, Requirements and Testing

BSI BS EN 840- 1

Mobile waste containers Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design

BSI BS EN 840- 2

Mobile waste containers Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices Dimensions and design

BSI BS EN 840- 5 Mobile waste containers Part 5: Performance requirements and test methods

BSI BS EN 840- 6 Mobile Waste Containers Part 6: Safety and Health Requirements

BSI BS EN 957- 8

Stationary Training Equipment - Part 8: Steppers, Stairclimbers and Climbers - Additional Specific Safety Requirements and Test Methods

BSI BS EN ISO 1

Geometrical Product Specifications (GPS) Standard Reference Temperature for Geometrical Product Specification and Verification

BSI BS EN ISO 10360- 1

Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 1: Vocabulary

BSI BS EN ISO 10360- 2

Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 2: CMMs Used for Measuring Size

BSI BS EN ISO 10360- 3

Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 3: CMMs with the Axis of a Rotary Table as the Fourth Axis

BSI BS EN ISO 10360- 4

Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machine (CMM) - Part 4: CMMs Used in Scanning Measuring Mode

BSI BS EN ISO 10360- 5

Geometrical Products Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 5: CMMs Using Multiple- Stylus Probing Systems

BSI BS EN ISO 10360- 6

Geometrical Products Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 6: Estimation of Errors in Computing Gaussian Associated Features

BSI BS EN ISO 1042

Laboratory Glassware - One-Mark Volumetric Flasks-AMD 10633: March 2000; Renumbers BS ISO 1042: 1998

BSI BS EN ISO 10534- 2

Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes - Part 2: Transfer-Function Method-AMD 13701: April 11, 2002; Renumbers BS ISO 10534-2: 1998;

BSI BS EN ISO 1119 Geometrical product specifications (GPS) Series of conical tapers and taper angles

BSI BS EN ISO 11439

Gas Cylinders - High Pressure Cylinders for the On-Board Storage of Natural Gas as a Fuel for Automotive Vehicles-AMD 13215: November 15, 2001; ISO 11439:2001;

BSI BS EN ISO 11623 Transportable Gas Cylinders - Periodic Inspection and Testing of Composite Gas Cylinders

BSI BS EN ISO 11644 Leather Test for adhesion of finish

BSI BS EN ISO 11683 Packaging - Tactile Warnings of Danger - Requirements-Supersedes BS 7280;

BSI BS EN ISO 13337 Spring-Type Straight Pins - Slotted, Light Duty

BSI BS EN ISO 14163 Acoustics - Guidelines for Noise Control by Silencers-AMD 10529; July 1999;

BSI BS EN ISO 14253- 1

Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications

BSI BS EN ISO 16017- 1

Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal Desorption/Capillary Gas Chromatography - Part 1: Pumped Sampling

BSI BS EN ISO 16017- 2

Indoor, ambient and workplace air Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography Part 2: Diffusive sampling-CORR 14619: August 5, 2003;

BSI BS EN ISO 16104 Packaging - Transport Packaging for Dangerous Goods - Test Methods

BSI BS EN ISO 216

Writing Paper and Certain Classes of Printed Matter - Trimmed Sizes - A and B Series-AMD 13596: April 19, 2002; Renumbers BS 4000-1: 1990

BSI BS EN ISO 2758

Paper Determination of bursting strength-AMD 14672: October 13, 2003; Renumbers BS ISO 2758:2001;

BSI BS EN ISO 2875

Packaging - Complete, Filled Transport Packages and Unit Loads - Water-Spray Test-Supersedes BS EN 22875:1993;

BSI BS EN ISO 3274

Geometric Product Specifications (GPS) - Surface Texture: Profile Method - Nominal Characteristics of Contact (Stylus) Instruments-AMD 9919: 3/1998; Renumbers BS ISO 3274: 1996

BSI BS EN ISO 3650

Geometrical Product Specifications (GPS) - Length Standards - Gauge Blocks-Supersedes BS 4311-1: 1993;

BSI BS EN ISO 3741

Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for reverberation rooms-CORR 14059: November 20, 2002; Supersedes BS 4196-1:1991 and BS 4196-2:1991;

BSI BS EN ISO 4287

Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Terms, Definitions and Surface Texture Parameters-Supersedes BS ISO 4287:1997;

BSI BS EN ISO 5167- 1

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements-Together with Parts 2, 3 and 4 of BS EN ISO 5167:2003, supersedes BS EN ISO 5167-1

BSI BS EN ISO 5167- 2

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates-Together with Parts 1, 3 and 4 of BS EN ISO 5167:2003, supersedes BS EN ISO 5167-1:1997;

BSI BS EN ISO 5167- 3

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles- CORR 14535: June 12,2003; Together with Parts 1, 2 and 4 of BS EN ISO 5167: 2003, supersed

BSI BS EN ISO 5167- 4

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes-CORR 14518: June 11, 2003; Together with Parts 1, 2 and 3 of BS EN ISO 5167: 2003, supersedes BS EN ISO

BSI BS EN ISO 5269- 1

Pulps Preparation of laboratory sheets for physical testing Part 1: Conventional sheet-former method-Renumbers BS ISO 5269-1:1998;

BSI BS EN ISO 534

Paper and board Determination of thickness, density and specific volume-Supersedes BS EN 20534:1993

BSI BS EN ISO 5458

Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing-Partially Supersedes BS 308-3: 1990;

BSI BS EN ISO 6346 Freight Containers - Coding, Identification and Marking (H)

BSI BS EN ISO 6817

Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters-Supersedes BS 5792: 1980; AMD 9333 January 15, 1997;

BSI BS EN Corrugating Medium - Determination of the Flat Crush Resistance After Laboratory Fluting

ISO 7263 (H)

BSI BS EN ISO 7726

Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities-CORR 13697:February 20, 2002; Supersedes BS EN 27726:1994;

BSI BS EN ISO 8318

Packaging Complete, filled transport packages and unit loads Sinusoidal vibration tests using a variable frequency-Supersedes BS EN 28318: 1992;

BSI BS EN ISO 8655- 1

Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations-Together with Parts 2 and 6, replaces BS 6018: 1991 and BS 7532: 1991;

BSI BS EN ISO 8655- 2

Piston-operated volumetric apparatus Part 2: Piston pipettes-Together with Parts 3, 4 and 5, supersedes BS 7653-2: 1993; Together with Parts 1 and 6, Supersedes BS 6018: 1991 and BS 7532: 1991;

BSI BS EN ISO 8655- 3

Piston-operated volumetric apparatus Part 3: Piston burettes-Together with Parts 2, 4 and 5, supersedes BS 7653-2: 1993;

BSI BS EN ISO 8655- 4

Piston-operated volumetric apparatus Part 4: Dilutors-Together with Parts 2, 3 and 5, supersedes BS 7653-2: 1993;

BSI BS EN ISO 8655- 5

Piston-operated volumetric apparatus Part 5: Dispensers-Together with Parts 2, 3 and 4, supersedes BS 7653-2: 1993;

BSI BS EN ISO 8655- 6

Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error-Supersedes BS 7653: 1993 and BS 7653-4: 1993; Together with Parts 1 and 2, supersedes BS 6018: 1991 and BS 7532: 1991;

BSI BS IEC 60605- 4

Equipment Reliability Testing - Part 4: Statistical Procedures for Exponential Distribution - Point Estimates, Confidence Intervals, Prediction Intervals and Tolerance Intervals

BSI BS IEC 60605- 6

Equipment Reliability Testing - Part 6: Tests for the Validity of the Constant Failure Rate or Constant Failure Intensity Assumptions-CORR 13096:July 2001;

BSI BS IEC 60825- 8 Safety of Laser Products - Part 8: Guidelines for the Safe Use of Medical Laser Equipment

BSI BS IEC 61124

Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity

BSI BS IEC 61520 Metal Thermowells for Thermometer Sensors - Functional Dimension

BSI BS IEC 61650

Reliability Data Analysis Techniques - Procedures for Comparison of Two Constant Failure Rates and Two Constant Failure (Event) Intensities

BSI BS IEC 61710 Power Law Model - Goodness-of-Fit Tests and Estimation Methods

BSI BS ISO 10110- 10

Optics and photonics Preparation of drawings for optical elements and systems Part 10: Table representing data of optical elements and cemented assemblies

BSI BS ISO 10155

Stationary Source Emissions - Automated Monitoring of Mass Concentrations of Particles - Performance Characteristics, Test Methods and Specifications (H)

BSI BS ISO 1101

Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out

BSI BS ISO 11095 Linear Calibration Using Reference Materials

BSI BS ISO 11243 Cycles - Luggage Carriers for Bicycles - Concepts, Classification and Testing (H)

BSI BS ISO 11338- 1

Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling

BSI BS ISO 11631 Measurement of Fluid Flow - Methods of Specifying Flowmeter Perfomance

BSI BS ISO 12233 Photography - Electronic Still Picture Cameras - Resolution Measurements

BSI BS ISO 12819

Methods of Evaluation of the Battery Life of a Battery-Powered Watch-CORR 10833: May 2001;

BSI BS ISO 13319

Determination of Particle Size Distributions - Electrical Sensing Zone Method-Supersedes BS 3406 PART 5:1983

BSI BS ISO 13320- 1 Particle Size Analysis - Laser Diffraction Methods - Part 1: General Principles

BSI BS ISO 13379

Condition monitoring and diagnostics of machines General guidelines on data interpretation and diagnostics techniques

BSI BS ISO 13769 Gas Cylinders - Stamp Marking-Supersedes BS EN 1089-1: 1997;

BSI BS ISO 14686

Hydrometric determinations Pumping tests for water wells Considerations and guidelines for design, performance and use

BSI BS ISO 1496- 2

Series 1 Freight Containers - Specification and Testing Part 2: Thermal Containers-Supersedes BS 3951: Part 2: Section 2.2: 1989;

BSI BS ISO 1496- 3

Series 1 Freight Containers - Specification and Testing Part 3: Tank Containers for Liquids, Gases and Pressurized Dry Bulk-Supersedes BS 3951 SEC 2.3:1992

BSI BS ISO 15469 Spatial distribution of daylight CIE standard general sky

BSI BS ISO 155 Belt Drives - Pulleys - Limiting Values for Adjustment of Centres

BSI BS ISO 15557 Practice for Use of a Radiochromic Film Dosimetry System

BSI BS ISO 15560

Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory

BSI BS ISO 17359 Condition monitoring and diagnostics of machines General guidelines

BSI BS ISO 18431- 2

Mechanical vibration and shock Signal processing Part 2: Time domain windows for Fourier Transform analysis

BSI BS ISO 18436- 1

Condition monitoring and diagnostics of machines Requirements for training and certification of personnel Part 1: Requirements for certifying bodies and the certification process

BSI BS ISO 2017- 1

Mechanical vibration and shock Resilient mounting systems Part 1: Technical information to be exchanged for the application of isolation systems-Supersedes BS 6414:1983

BSI BS ISO 2470

Paper, Board and Pulps - Measurement of Diffuse Blue Reflectance Factor (ISO Brightness)-Supersedes BS 4432-2:1995;

BSI BS ISO 2966

Cinematography - 16 mm Motion-Picture Film Perforated 8 mm Type S (1-3) and (1-4) - Cutting and Perforating Dimensions

BSI BS ISO 31- 1 Quantities and units Part 1: Space and time-Supersedes BS 5775- 1:1993

BSI BS ISO 31- 10

Quantities and units Part 10: Nuclear reactions and ionizing radiations- Supersedes BS 5775-10:1993

BSI BS ISO 31- 11

Quantities and units Part 11: Mathematical signs and symbols for use in the physical sciences and technology-Supersedes BS 5775-11:1993

BSI BS ISO 31- 12 Quantities and units Part 12: Characteristic numbers-Supersedes BS 5775-12:1993

BSI BS ISO 31- 2 Quantities and units Part 2: Periodic and related phenomena-Supersedes BS 5775-2:1993

BSI BS ISO 31- 3 Quantities and units Part 3: Mechanics-Supersedes BS 5775- 3:1993

BSI BS ISO 31- 4 Quantities and units Part 4: Heat-Supersedes BS 5775-4:1993

BSI BS ISO 31- 5 Quantities and units Part 5: Electricity and magnetism-Supersedes BS 5775-5:1993

BSI BS ISO 31- 6

Quantities and units Part 6: Light and related electromagnetic radiations- Supersedes BS 5775-6:1993

BSI BS ISO 31- 7 Quantities and units Part 7: Acoustics-Supersedes BS 5775- 7:1993

BSI BS ISO 31- 8

Quantities and units Part 8: Physical chemistry and molecular physics- Supersedes BS 5775-8:1993

BSI BS ISO 31- 9 Quantities and units Part 9: Atomic and nuclear physics-Supersedes BS 5775-9:1993

BSI BS ISO 3874

Series 1 freight containers - Handling and securing-AMD 14070: February 24, 2003; Supersedes BS 3951-1-1.5: 1989;

BSI BS ISO 4037- 1

X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a Function of Photon Energy Part 1: Radiation Characteristics and Production Methods-In Conjunction with BS ISO 4037-2, it Supersedes B

BSI BS ISO 4037- 2

X and Gamma Reference Radiation for Calibrating Dosemeters and Doserate Meters and for Determining Their Response as a Function of Photon Energy Part 2: Dosimetry for Radiation Protection over the Energy Ranges 8 keV to 1,3 MeV and 4 MeV to 9 MeV-Super

BSI BS ISO 4037- 4

X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields

BSI BS ISO 4046- 4

Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products-Together with BS ISO 4046-1, BS ISO 4046-2, BS ISO 4046-3 and BS ISO 4046-5, it supersedes BS 3203:1979;

BSI BS ISO 4365

Liquid flow in open channels Sediment in streams and canals Determination of concentration, particle size distribution and relative density-Supersedes BS 3680-10D:1986

BSI BS ISO 4800

Laboratory Glassware - Separating Funnels and Dropping Funnels- Supersedes BS 2021: 1980;

BSI BS ISO 5168

Measurement of fluid flow Procedures for the evaluation of uncertainties-Supersedes BS ISO TR 5168: 1998

BSI BS ISO 5655

Photography - Industrial Radiographic Films (Roll and Sheet) and Metal Intensifying Screens - Dimensions

BSI BS ISO 5725- 2

Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method-CORR 13997: November 12, 2002; Implementation of ISO 5725-2:1994; BS

BSI BS ISO 5725- 3

Implementation of ISO 5725-3:1994 Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 3: Intermediate Measures of the Precision of a Standard Measurement Method-CORR 13575:March 15,2002;

BSI BS ISO 668 Series 1 Freight Containers - Classification, Dimensions and Ratings (H)

BSI BS ISO 6780

General-Purpose Flat Pallets for Through Transit of Goods - Principal Dimensions and Tolerances

BSI BS ISO 68- 1 ISO General Purpose Screw Threads - Basic Profile - Part 1: Metric Screw Threads

BSI BS ISO 68- 2 ISO General Purpose Screw Threads - Basic Profile - Part 2: Inch Screw Threads

BSI BS ISO 7919- 5

Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power generating and pumping plants

BSI BS ISO 8015 Technical Drawings - Fundamental Tolerancing Principle

BSI BS ISO 9096

Stationary source emissions Manual determination of mass concentration of particulate matter-Supersedes BS 6069-4.3: 1992;

BSI BS ISO 965- 1 ISO General Purpose Metric Screw Threads - Tolerances - Part 1: Principles and Basic Data

BSI BS ISO 965- 2

ISO General Purpose Metric Screw Threads - Tolerances - Part 2: Limits of Sizes for General Purpose External and Internal Screw Threads - Medium Quality

BSI BS ISO 965- 3

ISO General Purpose Metric Screw Threads - Tolerances - Part 3: Deviations for Constructional Screw Threads

BSI BS ISO 965- 4

ISO General Purpose Metric Screw Threads - Tolerances - Part 4: Limits of Sizes for Hot-Dip Galvanized External Screw Threads to Mate with Internal Screw Threads Tapped with Tolerance Position H or G After Galvanizing

BSI BS ISO 965- 5

ISO General Purpose Metric Screw Threads - Tolerances - Part 5: Limits of Sizes for Internal Screw Threads to Mate with Hot-Dip Galvanized External Screw Threads with Maximum Size of Tolerance Position h Before Galvanizing

BSI BS ISO TR 10232

General-Purpose Flat Pallets for Through Transit of Goods - Design Rating and Maximum Working Load (H)

BSI BS ISO TR 15070 Series 1 Freight Containers - Rationale for Structural Test Criteria

BSI BS ISO/IEC 15415

Information technology Automatic identification and data capture techniques Bar code print quality test specification Two-dimensional symbols

BSI BS ISO/TR 12765

Measurement of Fluid Flow in Closed Conduits - Methods Using Transit-Time Ultrasonic Flowmeters

BSI DD 247 Documentation - Vocabulary

BSI DD ENV ISO 11079 Evaluation of Cold Environments - Determination of Required Clothing Insulation (IREQ)

BSI DD ENV ISO 14253- 2

Geometrical Product Specifications (GPS)- Inspection by Measurement of Workpieces and Measuring Equipments - Part 2: Guide to the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification

BSI DD ISO/PAS 17712

Freight containers Mechanical seals

BSI DD ISO/TS 17450- 1

Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification

BSI DD ISO/TS 21748

Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation

BSI DD ISO/TS 21749

Measurement and uncertainty for metrological applications Repeated measurements and nested experiments

BSI PD 6461- 1 AMD 1 General metrology Part 1: Basic and general terms (VIM)-AMD 14132: June 13, 2003;

BSI PD 6461- 2

General metrology Part 2: Vocabulary of legal metrology (VLM)-AMD 14131: June 13,2003; Supersedes PD 6461:1971;

BSI PD 6461- 3

General metrology Part 3: Guide to the expression of uncertainty in measurement (GUM)-AMD 14133: June 13, 2003;

BSI PD 6461- 4 General metrology Part 4: Practical guide to measurement uncertainty

BSI PD CEN/TR 13695- 2

Packaging Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment Part 2: Requirements for measuring and verifying dangerous substances present in pack

BSI PD IEC TR 60909- 1

Short-circuit currents in three-phase a.c. systems Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0-Supersedes PD 7639- 1:1994

BSI PD IEC/TR 60825- 5

Safety of laser products Part 5: Manufacturer s checklist for IEC 60825-1- Supersedes BS IEC TR 60825-5:1998;

BSI PD ISO/TR 22971

Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results

BSI - Process and Heavy Engineering CollectionPopular Standards from this Collection.

BSI BS 10 Flanges and Bolting Pipes, Valves and Fittings-Amd 4;

BSI BS 1042- 2.1

Methods of Measurement of Fluid Flow in Closed Conduits Part 2: Pitot Tubes Section 2.1: Method Using Pitot-Static Tubes

BSI BS 1042- 2.2

Methods of Measurement of Fluid Flow in Closed Conduits Part 2: Pitot Tubes Section 2.2: Method of Measurement of Velocity at One Point of a Conduit of Circular Cross Section

BSI BS 1042- 2.3

Methods of Measurement of Fluid Flow in Closed Conduits Part 2: Pitot Tubes Section 2.3: Methods of Flow Measurement in Swirling or Asymmetric Flow Conditions in Circular Ducts by Means of Current-Meters or Pitot Static Tubes

BSI BS 1113Design and Manufacture of Water-Tube Steam Generating Plant (Including Superheaters, Reheaters and Steel Tube Economizers)-CORR 12026: October 2000; Partially superseded by BS EN 12952-1: 2001, BS EN 12952-10: 2002, BS EN 12952-2: 2001, BS EN 12952-3:

BSI BS 1179 Glossary of Terms Used in the Gas Industry-AMD 3202: June 1980; Partially replaced by BS 1179-6: 1980;

BSI BS 1306 Copper and Copper Alloy Pressure Piping Systems-Amd 1;

BSI BS 1553- 1

Specification for Graphical Symbols for General Engineering Part 1: Piping Systems and Plant-Replaces BS 974: 1953;

BSI BS 1553- 2

Specification for Graphical Symbols for General Engineering Part 2: Graphical Symbols for Power Generating Plant

BSI BS 1560- 3.2

Steel Pipe Flanges and Flanged Fittings (Nominal Sizes Half an Inch to 24 Inch) for the Petroleum Industry Part 3: Steel, Cast Iron and Copper Alloy Flanges Section 3.2: Cast Iron Flanges

BSI BS 1600 Dimensions of Steel Pipe for the Petroleum Industry (AMD 7204) June 15, 1992 (Q)-Amd 1;

BSI BS 1640- 1

Steel Butt-Welding Pipe Fittings for the Petroleum Industry Part 1: Wrought Carbon and Ferritic Alloy Steel Fittings-Amd 3;

BSI BS 1640- 2

Steel Butt-Welding Pipe Fittings for the Petroleum Industry Part 2: Wrought and Cast Austenitic Chromium-Nickel Steel Fittings-Amd 3;

BSI BS 1640- 3

Steel Butt-Welding Pipe Fittings for the Petroleum Industry Part 3: Wrought Carbon and Ferritic Alloy Steel Fittings-Amd 1;

BSI BS 1640- 4

Steel Butt-Welding Pipe Fittings for the Petroleum Industry Part 4: Wrought and Cast Austenitic Chromium-Nickel Steel Fittings

BSI BS 1646- 1

Symbolic Representation for Process Measurement Control Functions and Instrumentation Part 1: Basic Requirements

BSI BS 1646- 2

Symbolic Representation for Process Measurement Control Functions and Instrumentation Part 2: Additional Basic Requirements

BSI BS 1646- 3

Symbolic Representation for Process Measurement Control Functions and Instrumentation Part 3: Detailed Symbols for Instrument Interconnection Diagrams

BSI BS 1646- 4

Symbolic Representation for Process Measurement Control Functions and Instrumentation Part 4: Basic Symbols for Process Computer, Interface and Shared Display/ Control Functions

BSI BS 1692 Gin Blocks

BSI BS 1710 Identification of Pipelines and Services-AMD 6012:October 1989; Reprinted

BSI BS 1757 Power-Driven Mobile Cranes (Q)

BSI BS 1868 Steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries-AMD 6563: July 1990; Reprinted, incorporating Amendment No. 1;

BSI BS 1873 Steel Globe and Globe Stop and Check Valves (Flanged and Butt- Welding Ends) for the Petroleum, Petrochemical and Allied Industries (AMD 6564) July 31, 1990-Amd 1;

BSI BS 2035 Cast Iron Flanged Pipes and Flanged Fittings-AMD 1297: October 31, 1973; Partially replaced by BS 4772: 1988;

BSI BS 228 Short Pitch Transmission Precision Roller Chains and Chain Wheels- ISO 606: 1994;

BSI BS 2452 High Pedestal or Portal Jib Cranes-AMD 365: November 15, 1969; See BS 2573;

BSI BS 2486 Recommendations for Treatment of Water for Steam Boilers and Water Heaters-AMD 9948: April 1998;

BSI BS 2594 Specification for Carbon Steel Welded Horizontal Cylindrical Storage Tanks-AMD 3274: May

1980; Partially Superseded by BS EN 12285-1: 2003;

BSI BS 2790 Design and Manufacture of Shell Boilers of Welded Construction-AMD 9551 July 15, 1997; Supersedes BS 2790 Case 24:1989

BSI BS 2915 Bursting Discs and Bursting Disc Devices-AMD 6781: July 31, 1991; Partially superseded by BS EN ISO 4126-2: 2003;

BSI BS 302 PART 3 Stranded Steel Wire Ropes Part 3: Zinc Coated Ropes for Ships-Replaces BS 365: 1968

BSI BS 302 PART 5 Stranded Steel Wire Ropes Part 5: Ropes for Hauling Purposes-Replaces BS 330: 1968

BSI BS 302 PART 7 Stranded Steel Wire Ropes Part 7: Large Diameter Ropes for General Purposes

BSI BS 302 PART 8 Stranded Steel Wire Ropes Part 8: Higher Breaking Load Ropes

BSI BS 3243 Hand-Operated Chain Blocks (AMD 9106) October 15, 1996 (Q)-Amd 2;

BSI BS 327 Power-Driven Derrick Cranes-Amd 1;

BSI BS 3293 Carbon Steel Pipe Flanges (Over 24 in Nominal Size) for the Petroleum Industry-AMD 1004: August 1972

BSI BS 3381 Spiral Wound Gaskets for Steel Flanges to BS 1560 (Q)

BSI BS 3551 Alloy Steel Shackles-Amd 1;

BSI BS 3680 PART 4A

Measurement of Liquid Flow in Open Channels Part 4A: Method Using Thin-Plate Weirs-AMD 5438: July 1987; AMD 10209: November 1998

BSI BS 3799 Steel Pipe Fittings, Screwed and Socket-Welding for the Petroleum Industry (AMD 5518) March 31, 1987-Amd 2;

BSI BS 3951 SEC 1.2

Freight Containers Part 1: General Section 1.2: Corner Fittings for Series 1 Freight Containers-AMD 6330: July 31, 1991;

BSI BS 3951 SEC 2.1

Freight Containers Part 2: Specification and Testing of Series 1 Freight Containers Section 2.1: General Cargo Containers for General Purposes (ISO 1496-1: 1990) (AMD 7790) July 15, 1993 (Q)-Amd 1;

BSI BS 4089 Specification for Metallic Hose Assemblies for Liquid Petroleum Gases and Liquefied Natural Gases

BSI BS 4278 Eyebolts for Lifting Purposes

BSI BS 4465 Design and Construction of Electric Hoists for Both Passengers and Materials

BSI BS 4515- 1

Specification for welding of steel pipelines on land and offshore Part 1: Carbon and carbon manganese steel pipelines

BSI BS 4515- 2 Welding of Steel Pipelines on Land and Offshore - Part 2: Duplex Stainless Steel Pipelines

BSI BS 463 PART 1 Sockets for Wire Ropes Part 1: Inch Units-Amd 4;

BSI BS 463 PART 2 Sockets for Wire Ropes Part 2: Metric Units

BSI BS 466 Power Driven Overhead Travelling Cranes Semi-Goliath and Goliath Cranes for General Use

BSI BS 470 Inspection, Access and Entry Openings for Pressure Vessels

BSI BS 4882 Bolting for Flanges and Pressure Containing Purposes-Partially Supersedes BS EN 1515-1: 2000 and BS EN 1515-3: 2005;

BSI BS 4898 Chain lever hoists

BSI BS 4994 Design and Construction of Vessels and Tanks in Reinforced Plastics (AMD 6295) November 30, 1990-Amd 1;

BSI BS 5000 INDEX

Rotating Electrical Machines of Particular Types or for Particular Applications General Introduction and Index Issue 5 (Q)

BSI BS 5000 PART 11

Rotating Electrical Machines of Particular Types or for Particular Applications Part 11: Small-Power Electric Motors and Generators (AMD 5634) July 29, 1988- Amd 3;

BSI BS 5000 PART 16

Rotating Electrical Machines of Particular Types or for Particular Applications Part 16: Rotating Electrical Machines with Type of Protection N

BSI BS 5000 PART 3

Rotating Electrical Machines of Particular Types or for Particular Applications Part 3: Generators to Be Driven by Reciprocating Internal Combustion Engines- Amd 1;

BSI BS 5154 Copper Alloy Globe, Globe Stop and Check, Check and Gate Valves

BSI BS 5169 Fusion Welded Steel Air Receivers-AMD 10003; May 1998;

BSI BS 5276 PART 1

Pressure Vessel Details (Dimensions) Part 1: Specification for Davits for Branch Covers of Steel Vessels

BSI BS 5353 Steel Plug Valves

BSI BS 5500 E/C INTRO Unfired Fusion Welded Pressure Vessels Enquiry Cases: Introduction-Issue 4,6,7;

BSI BS 5501 PART 9

Electrical Apparatus for Potentially Explosive Atmospheres Part 9: Specification for Intrinsically Safe Electrical Systems i-AMD 6435: March 30, 1990;

BSI BS 5908 Code of Practice for Fire Precautions in the Chemical and Allied Industries

BSI BS 6166- 1 Lifting slings Part 1: Methods of rating-Replaces BS PD 6464: 1972

BSI BS 6166- 3 Lifting slings Part 3: Guide to selection and safe use of lifting slings for multi-purposes

BSI BS 6349 PART 2 Code of Practice for Maritime Structures Part 2: Design of Quay Walls, Jetties and Dolphins

BSI BS 6349 PART 3

Code of Practice for Maritime Structures; Part 3: Design of Dry Docks, Locks, Slipways and Shipbuilding Berths, Shiplifts and Dock and Lock Gates

BSI BS 6349 PART 4 Maritime Structures Part 4: Code fof Practice for Design of Fendering and Mooring Systems

BSI BS 6349 PART 5 Maritime Structures Part 5: Code of Practice for Dredging and Land Reclamation

BSI BS 6349 PART 6

Code of Practice for Maritime Structures Part 6: Design of Inshore Moorings and Floating Structures

BSI BS 6349 PART 7 Maritime Structures Part 7: Guide to the Design and Construction of Breakwaters

BSI BS 6349- 1 Maritime structures Part 1: Code of practice for general criteria-AMD 13445: July 24, 2003

BSI BS 6364 Valves for Cryogenic Service-AMD 10115/R; September 15,1998; Corrected and Reprinted, November 1998;

BSI BS 6739 Instrumentation in Process Control Systems: Installation Design and Practice

BSI BS 6883 Elastomer Insulated Cables for Fixed Wiring in Ships and on Mobile and Fixed Offshore Units - Requirements and Test Methods

BSI BS 7121 PART 1 Code of Practice for Safe Use of Cranes Part 1: General (AMD 9093) May 15, 1996-Amd 1;

BSI BS 7121 PART 4 Code of Practice for Safe Use of Cranes Part 4: Lorry Loaders

BSI BS 7121 PART 5 Code of Practice for Safe Use of Cranes Part 5: Tower Cranes

BSI BS 7121- 11 Code of Practice for Safe Use of Cranes - Part 11: Offshore Cranes

BSI BS 7121- 2 Code of practice for safe use of cranes Part 2: Inspection, testing and examination

BSI BS 7121- 3 Code of Practice for Safe Use of Cranes Part 3: Mobile Cranes

BSI BS 7333 Slewing Jib Cranes

BSI BS 759 PART 1

Valves, Gauges and Other Safety Fittings for Application to Boilers and to Piping Installations for and in Connection with Boilers Part 1: Specification for Valves, Mounting and Fittings-Amd 1;

BSI BS 7706 Guide to Calibration and Setting-Up of the Ultrasonic Time of Flight Diffraction (TOFD) Technique for the Detection, Location and Sizing of Flaws (Q)

BSI BS 7777 PART 1

Flat-Bottomed, Vertical, Cylindrical Storage Tanks for Low Temperature Service Part 1: Guide to the General Provisions Applying for Design, Construction, Installation and Operation (Q)

BSI BS 7777 PART 2

Flat-Bottomed, Vertical, Cylindrical Storage Tanks for Low Temperature Service Part 2: Specification for the Design and Construction of Single, Double and Full Containment Metal Tanks for the Storage of Liquefied Gas at Temperatures down to - 165 Degre

BSI BS 7777 PART 3

Flat-Bottomed, Vertical, Cylindrical Storage Tanks for Low Temperature Service Part 3: Recommendations for the Design and Construction of Prestressed and Reinforced Concrete Tanks and Tank Foundations, and for the Design and Installation of Tank Insula

BSI BS 7777 PART 4

Flat-Bottomed, Vertical, Cylindrical Storage Tanks for Low Temperature Service Part 4: Specification for the Design and Construction of Single Containment Tanks for the Storage of Liquid Oxygen, Liquid Nitrogen or Liquid Argon (Q)

BSI BS 848 PART 1

Fans for General Purposes Part 1: Performance Testing Using Standardized Airways-ISO 5801: 1997;

BSI BS 848 PART 4 Fans for General Purposes Part 4: Dimensions-ISO 13351: 1996

BSI BS 848- 5 Fans for General Purposes - Part 5: Specification for Mechanical Safety (Guarding)-ISO 12499:1999;

BSI BS 848- 7 Fans for general purposes Part 7: Specifications for balancing and vibration-Also Known as BS ISO 14694: 2003

BSI BS 88 PART 6

Cartridge Fuses for Voltages up to and Including 1000 V a.c. and 1500 V d.c. Part 6: Specification of Supplementary Requirements for Fuses of Compact Dimensions for Use in 240/415 V a.c. Industrial and Commercial Electrical Installations-Amd 1;

BSI BS 88 SEC 2.2

Cartridge Fuses for Voltages up to and Including 1000 V a.c. and 1500 V d.c. Part 2: Specification for Fuses for Use by Authorized Persons (Mainly for Industrial Application) Section 2.2: Additional Requirements for Fuses with Fuse-Links for Bolted Con

BSI BS EN 10028- 1

Flat Products Made of Steels for Pressure Purposes - Part 1: General Requirements-AMD 14284: March 3, 2003;

BSI BS EN 10028- 3

Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized

BSI BS EN 10029

Tolerances on Dimensions, Shape and Mass for Hot Rolled Steel Plates 3 mm Thick or Above (Q)-Supersedes BS 4360:1990

BSI BS EN 10208- 1

Steel Pipes for Pipelines for Combustible Fluids - Technical Delivery Conditions - Part 1: Pipes of Requirement Class A

BSI BS EN 10208- 2

Steel Pipes for Pipelines for Combustible Fluids - Technical Delivery Conditions Part 2: Pipes of Requirement Class B

BSI BS EN 10213- 1

Corr.1 Technical Delivery Conditions for Steel Castings for Pressure Purposes Part 1: General-CORR 10194; September 15, 1998; Together with Parts 2,3 and 4, it Supersedes BS 1504: 1976;

BSI BS EN 10213- 4

Technical Delivery Conditions for Steel Castings for Pressure Purposes Part 4: Austenitic and Austenitic-Ferritic Steel Grades (Q)

BSI BS EN 10217- 7

Welded steel tubes for pressure purposes Technical delivery conditions Part 7: Stainless steel tubes-Supersedes BS 3605-2:1992

BSI BS EN 10219- 2

Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels Part 2: Tolerances, Dimensions and Sectional Properties-Supersedes BS 6363: 1983;

BSI BS EN 10222- 1

Steel Forgings for Pressure Purposes - Part 1: General Requirements for Open Die Forgings-AMD 13923: October 11, 2002; Supersedes BS 1503: 1989;

BSI BS EN 10222- 2

Steel Forgings for Pressure Purposes - Part 2: Ferritic and Martensitic Steels with Specified Elevated Temperature Properties-Together with BS EN 10222-1, -3, -4, and -5, it Supersedes BS 1503:1989;

BSI BS EN 10222- 3

Steel Forgings for Pressure Purposes - Part 3: Nickel Steels with Specified Low-Temperature Properties-Supersedes BS 1503: 1989;

BSI BS EN 10222- 4

Steel Forgings for Pressure Purposes - Part 4: Weldable Fine-Grain Steels with High Proof Strength-AMD 13399:October 8,2001; Supersedes BS 1503: 1989;

BSI BS EN 10222- 5

Steel Forgings for Pressure Purposes - Part 5: Martensitic, Austenitic and Austenitic-Ferritic Stainless Steels-Together with BS EN 10222-1, -2, -3, and -4, Supersedes BS 1503:1989;

BSI BS EN 10253- 1

Butt-Welding Pipe Fittings - Part 1: Wrought Carbon Steel for General Use and Without Specific Inspection Requirements

BSI BS EN 10272

Stainless Steel Bars for Pressure Purposes-Together with BS EN 10273: 2000 Supersedes BS 1502: 1982;

BSI BS EN 10289

Steel Tubes and Fittings for Onshore and Offshore Pipelines External Liquid Applied Epoxy and Epoxy-Modified Coatings

BSI BS EN 10290

Steel Tubes and Fittings for Onshore and Offshore Pipelines External Liquid Applied Polyurethane and Polyurethane-Modified Coatings

BSI BS EN 1089- 2

Transportable Gas Cylinders - Gas Cylinder Identification (Excluding LPG) - Part 2: Precautionary Labels

BSI BS EN 1089- 3

Transportable gas cylinders Gas cylinder identification (excluding LPG) Part 3: Colour coding-Supersedes BS 349: 1973 and BS 349C: 1973

BSI BS EN 1092- 1

Flanges and Their Joints - Circular Flanges for Pipes, Valves, Fittings and Accessories, PN Designated - Part 1: Steel Flanges-CORR 13960: July 1, 2002; Supersedes BS 4504-3.1: 1989;

BSI BS EN 1092- 2

Flanges and Their Joints - Circular Flanges for Pipes, Valves, Fittings and Accessories, PN Designated Part 2: Cast Iron Flanges-Supersedes BS 4504: Section 3.2: 1989;

BSI BS EN 1092- 3

Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated Part 3: Copper alloy flanges-CORR 15319:August 25, 2004; Supersedes BS 4504-3.3:1989

BSI BS EN 1092- 4

Flanges and Their Joints - Circular Flanges for Pipes, Valves, Fittings and Accessories, PN Designated - Part 4: Aluminium Alloy Flanges

BSI BS EN 1160

Installions and Equipment for Liquefied Natural Gas - General Characteristics of Liquefied Natural Gas

BSI BS EN 12077- 2 Cranes Safety - Requirements for Health and Safety - Part 2: Limiting and Indicating Devices

BSI BS EN 12079

Offshore Containers - Design, Construction, Testing, Inspection and Marking-Supersedes BS 7072: 1989;

BSI BS EN Workshop fabricated steel tanks Part 1: Horizontal cylindrical single skin and double skin

12285- 1 tanks for the underground storage of flammable and non-flammable water polluting liquids-Partially Supersedes BS 2594: 1975;

BSI BS EN 12334

Industrial valves Cast iron check valves-CORR 14086:January 20, 2003; AMD 15228:August 24,2004; Supersedes BS 5153:1974

BSI BS EN 12385- 3

Steel wire ropes Safety Part 3: Information for use and maintenance- Supersedes BS 6570:1986

BSI BS EN 12560- 2

Flanges and Their Joints - Gaskets for Class-Designated Flanges - Part 1: Non-Metallic Flat Gaskets with or without Inserts-Superseded BS 7076-1: 1989;

BSI BS EN 12627

Industrial Valves - Butt Welding Ends for Steel Valves-Together with BS EN 558-1: 1996 and BS EN 558-2: 1996 It Supersedes BS 2080: 1989;

BSI BS EN 12952- 1

Water-Tube Boilers and Auxiliary Installations - Part 1: General-Partially Supersedes BS 1113: 1999;

BSI BS EN 12952- 8

Water-Tube Boilers and Auxiliary Installations - Part 8: Requirements for Firing Systems for Liquid and Gaseous Fuels for the Boiler-Partially Supersedes BS 1113: 1999;

BSI BS EN 12953- 1 Shell Boilers - Part 1: General-Partially Supersedes BS 2790:1992;

BSI BS EN 12953- 5

Shell Boilers - Part 5: Inspection During Construction, Documentation and Marking of Pressure Parts of the Boiler-Partially Supersedes BS 2790:1992;

BSI BS EN 12953- 8

Shell Boilers - Part 8: Requirements for Safeguards Against Excessive Pressure-CORR 14006:August 6,2002; Partially Supersedes BS 2790:1992 and BS 1894:1992;

BSI BS EN 12954

Cathodic Protection of Buried or Immersed Metallic Structures - General Principles and Application for Pipelines

BSI BS EN 12999 Cranes Loader cranes-AMD 15527: February 8, 2005

BSI BS EN 13001- 1

Crane safety General design Part 1: General principles and requirements- AMD 15621: March 9, 2005

BSI BS EN 13001- 2 Crane safety General design Part 2: Load effects-AMD 15622: March 9, 2005

BSI BS EN 13135- 1 Cranes Safety Design Requirements for equipment Part 1: Electrotechnical equipment

BSI BS EN 13135- 2 Cranes Equipment Part 2: Non-electrotechnical equipment

BSI BS EN 13155 Cranes Safety Non-fixed load lifting attachments

BSI BS EN 13157 Cranes Safety Hand powered lifting equipment

BSI BS EN 13411- 1

Terminations for Steel Wire Ropes - Safety - Part 1: Thimbles for Steel Wire Rope Slings-Supersedes BS 464:1958;

BSI BS EN 13411- 2 Terminations for Steel Wire Ropes - Safety - Part 2: Splicing of Eyes for Wire Rope Slings

BSI BS EN 13411- 3

Terminations for steel wire ropes Safety Part 3: Ferrules and ferrule- securing-Supersedes BS 5281:1975

BSI BS EN 13414- 1

Steel wire rope slings Safety Part 1: Slings for general lifting service- Supersedes BS 1290:1983;

BSI BS EN 13414- 2

Steel wire rope slings Safety Part 2: Specification for information for use and maintenance to be provided by the manufacturer-Supersedes BS 6210:1983;

BSI BS EN 13414- 3 Steel wire rope slings Safety Part 3: Grommets and cable-laid slings

BSI BS EN 13445- 1 Unfired Pressure Vessels - Part 1: General-CORR 14674: November 26, 2003;

BSI BS EN 13445- 2

Unfired pressure vessels Part 2: Materials-CORR 14292:April 30, 2003; CORR 14496:November 26, 2003; CORR 15260:July 30, 2004

BSI BS EN 13445- 3

Unfired pressure vessels Part 3: Design-CORR 14293:April 30, 2003; CORR 14495:September 19, 2003; CORR 14913:April 22, 2004; CORR 15261:July 30, 2004

BSI BS EN 13445- 4

Unfired pressure vessels Part 4: Fabrication-CORR 14401:April 30, 2003; CORR 14493:November 26, 2003; CORR 15262:July 30, 2004

BSI BS EN 13445- 5

Unfired pressure vessels Part 5: Inspection and testing-CORR 14294:April 30, 2003; CORR 14494:November 26, 2003; CORR 14914:March 25, 2004; CORR 15263:July 30, 2004

BSI BS EN 13445- 6

Unfired pressure vessels Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron-AMD 15178:May 19, 2004; CORR 15215:July 1, 2004; CORR 15264:July 30, 2004

BSI BS EN 13463- 5

Non-electrical equipment intended for use in potentially explosive atmospheres Part 5: Protection by constructional safety c

BSI BS EN 13463- 8

Non-electrical equipment for potentially explosive atmospheres Part 8: Protection by liquid immersion k

BSI BS EN 13480- 1 Metallic Industrial Piping - Part 1: General-Partially Supersedes BS 806: 1993;

BSI BS EN 13480- 2 Metallic Industrial Piping - Part 2: Materials-Partially Supersedes BS 806: 1993;

BSI BS EN 13480- 3 Metallic Industrial Piping - Part 3: Design and Calculation-Partially Supersedes BS 806: 1993;

BSI BS EN 13480- 4

Metallic Industrial Piping - Part 4: Fabrication and Installation-Partially Supersedes BS 806: 1993;

BSI BS EN 13480- 5 Metallic Industrial Piping - Part 5: Inspection and Testing-Partially Supersedes BS 806: 1993;

BSI BS EN 13636 Cathodic protection of buried metallic tanks and related piping

BSI BS EN 13852- 1

Cranes Offshore cranes Part 1: General-purpose offshore cranes-AMD 15815: November 11, 2005

BSI BS EN 13852- 2 Cranes Offshore cranes Part 2: Floating cranes

BSI BS EN 13889

Forged steel shackles for general lifting purposes Dee shackles and bow shackles Grade 6 Safety

BSI BS EN 13942 Petroleum and natural gas industries Pipeline transportation Pipeline valves

BSI BS EN 14161

Petroleum and natural gas industries Pipeline transportation systems-Supersedes BS 8010-1:1989; BS 8010-2.8:1992 and BS 8010-3:1993;

BSI BS EN 14163 Petroleum and Natural Gas Industries Pipeline Transportation Systems Welding of Pipelines

BSI BS EN 14334 Inspection and testing of LPG road tankers

BSI BS EN 1473 Installation and Equipment for Liquefied Natural Gas - Design of Onshore Installations

BSI BS EN 1474

Installation and Equipment for Liquefied Natural Gas - Design and Testing of Loading/Unloading Arms

BSI BS EN 14870- 1

Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends

BSI BS EN 1492- 1

Textile Slings - Safety - Part 1: Flat Woven Webbing Slings,Made of Man- Made Fibres, for General Purpose Use

BSI BS EN 1515- 1

Flanges and Their Joints - Bolting - Part 1: Selection of Bolting-Partially Supersedes BS 4504-3.1: 1989 and BS 4882: 1990;

BSI BS EN 1515- 2

Flanges and Their Joints - Bolting - Part 2: Classification of Bolt Materials for Steel Flanges, PN Designated

BSI BS EN 1532 Installation and Equipment for Liquefied Natural Gas - Ship to Shore Interface

BSI BS EN 1594

Gas Supply Systems - Pipelines for Maximum Operating Pressure over 16 Bar - Functional Requirements

BSI BS EN 1765

Rubber hose assemblies for oil suction and discharge services Specification for the assemblies

BSI BS EN 1808

Safety Requirements on Suspended Access Equipment - Design Calculations, Stability Criteria, Construction - Tests

BSI BS EN 1984 Industrial Valves - Steel Gate Valves-Supersedes BS 5157: 1989;

BSI BS EN 280

Mobile elevating work platforms Design calculations Stability criteria Construction Safety Examinations and tests-AMD 15193:August 26, 2004; Supersedes BS 7171:1989

BSI BS EN 286- 1

Simple Unfired Pressure Vessels Designed to Contain Air or Nitrogen - Part 1: Pressure Vessels for General Purposes-AMD 14014: December 12, 2002;

BSI BS EN 397 Industrial Safety Helmets-AMD 10978: March 2001; Supersedes BS 5240-1:1987;

BSI BS EN 444

Non-Destructive Testing - General Principles for Radiographic Examination of Metallic Materials by X- and Gamma-Rays (Q)

BSI BS EN 50014

Electrical Apparatus for Potentially Explosive Atmospheres - General Requirements-AMD 10552; August 1999; Supersedes BS 4683-1:1998; SUPERSEDED BY BS EN 60079-0:2004

BSI BS EN 50015

Electrical Apparatus for Potentially Explosive Atmospheres - Oil Immersion "O"-Supersedes BS 5501-2:1997;

BSI BS EN 50016 Electrical Apparatus for Potentially Explosive Atmospheres - Pressurized Apparatus "p"

BSI BS EN 50018

Electrical apparatus for potentially explosive atmospheres - Flameproof enclosure d-AMD 14211: March 14, 2003; Supersedes BS 229:1957, BS 4683-2:1971, BS 5501-5:1977; Superseded by BS EN 60079-1:2004 but remains current

BSI BS EN 50020 Electrical Apparatus for Potentially Explosive Atmospheres - Intrinsic Safety i

BSI BS EN 50021

Corr.1 Electrical Apparatus for Potentially Explosive Atmospheres - Type of Protection "n"-CORR 10697: September 1999; Supersedes BS 6941: 1988; Superseded by BS EN 60079-15: 2003 but remains current

BSI BS EN 50122- 1

Railway Applications - Fixed Installations Part 1: Protective Provisions Relating to Electrical Safety and Earthing

BSI BS EN 50347

General purpose three-phase induction motors having standard dimensions and outputs Frame numbers 56 to 315 and flange numbers 65 to 740-AMD 15055: April 22, 2004; Supersedes BS 5000-10:1978; Together with BS 4999-103:2004 Supersedes BS 4999-103:1987;

BSI BS EN 54- 3

Fire detection and fire alarm systems Part 3: Fire alarm devices Sounders-AMD 14341: March 11, 2003;

BSI BS EN 60034- 3

Rotating Electrical Machines Part 3: Specific Requirements for Turbine- Type Synchronous Machines-AMD 9035: July 15, 1996; Renumbers BS 5000- 2:1992

BSI BS EN 60079- 0

Electrical apparatus for explosive gas atmospheres Part 0: General requirements-Supersedes BS EN 50014:1993, BS EN 50014:1998

BSI BS EN 60079- 1 Electrical apparatus for explosive gas atmospheres Part 1: Flameproof enclosures d

BSI BS EN 60079- 10

Electrical Apparatus for Explosive Gas Atmospheres Part 10: Classification of Hazardous Areas

BSI BS EN 60079- 14

Electrical Apparatus for Explosive Gas Atmospheres Part 14: Electrical Installations in Hazardous Areas (Other than Mines)

BSI BS EN 60079- 15

Electrical apparatus for explosive gas atmospheres Part 15: Construction, test and marking of type of protection n electrical apparatus-Supersedes BS 6941: 1988

BSI BS EN 60079- 17

Electrical apparatus for explosive gas atmospheres Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)

BSI BS EN 60079- 18

Electrical apparatus for explosive gas atmospheres Part 18: Construction, test and marking of type of protection encapsulation m electrical apparatus- Supersedes BS 5501-8:1988; CORR 15194: May 26, 2004; Corr 15208: June 7, 2004

BSI BS EN 60079- 25 Electrical apparatus for explosive gas atmospheres Part 25: Intrinsically safe systems

BSI BS EN 60079- 7

Electrical apparatus for explosive gas atmospheres Part 7: Increased safety e -CORR 15033: March 25, 2004;;

BSI BS EN 60470

High-Voltage Alternating Current Contactors and Contactor-Based Motor Starters-IEC 60470:2000; Supersedes BS 5856 Part 1:1980 and BS 775 Part 2:1974;

BSI BS EN 60534-2- 1

Industrial-Process Control Valves - Part 2-1: Flow Capacity - Sizing Equations for Fluid Flow under Installed Conditions-CORR 13586: July 15, 2002; Cancels and Replaces BS EN 60534-2-2:1993; IEC 60534-2-1: 1998;

BSI BS EN 61285 Industrial-process control Safety of analyser houses

BSI BS EN 61779- 1

Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 1: General Requirements and Test Methods-Supersedes BS EN 50054:1999;

BSI BS EN 764- 2 Pressure Equipment - Part 2: Quantities, Symbols and Units

BSI BS EN 764- 5 Pressure Equipment Part 5: Compliance and Inspection Documentation of Materials

BSI BS EN 764- 7

Pressure equipment Part 7: Safety systems for unfired pressure vessels- CORR 15386:October 4, 2004

BSI BS EN 818- 1 Short Link Chain for Lifting Purposes - Safety Part 1: General Conditions of Acceptance (Q)

BSI BS EN 982

Safety of Machinery - Safety Requirements for Fluid Power Systems and Their Components - Hydraulics (Q)

BSI BS EN ISO 10417

Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress

BSI BS EN ISO 10418

Petroleum and natural gas industries Offshore production installations Basic surface process safety systems

BSI BS EN ISO 10432

Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment

BSI BS EN ISO 10434

Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries-Supersedes BS 1414:1975

BSI BS EN ISO 10437

Petroleum, petrochemical and natural gas industries Steam turbines Special-purpose applications

BSI BS EN ISO 10438- 1

Petroleum, petrochemical and natural gas industries Lubrication, shaft- sealing and control-oil systems and auxiliaries Part 1: General requirements

BSI BS EN ISO 10439

Petroleum, chemical and gas service industries Centrifugal compressors-CORR 14760: October 7, 2003;

BSI BS EN ISO 10441

Petroleum and Natural Gas Industries - Flexible Couplings for Mechanical Power Transmission - Special Purpose Applications-CORR 13062:February 2001;

BSI BS EN ISO 1127 Stainless Steel Tubes - Dimensions, Tolerances and Conventional Masses Per Unit Length

BSI BS EN ISO 11960 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells

BSI BS EN ISO 13533

Petroleum and Natural Gas Industries - Drilling and Production Equipment - Drill-Through Equipment-ISO 13533: 2001;

BSI BS EN ISO 13631

Petroleum and natural gas industries Packaged reciprocating gas compressors-CORR 14188: October 17, 2002;

BSI BS EN ISO 13680

Petroleum and Natural Gas Industries - Corrosion-Resistant Alloy Seamless Tubes for Use as Casing, Tubing and Coupling Stock - Technical Delivery Conditions

BSI BS EN ISO 13691

Petroleum and natural gas industries High-speed special-purpose gear units-AMD 14307: March 24, 2003; Renumbers BS ISO 13691:2001;

BSI BS EN ISO 13702

Petroleum and Natural Gas Industries - Control and Mitigation of Fires and Explosions on Offshore Production Installations - Requirements and Guidelines

BSI BS EN ISO 13703

Petroleum and Natural Gas Industries - Design and Installation of Piping Systems on Offshore Production Platforms-CORR 14034: August 13, 2002;

BSI BS EN ISO 13705

Petroleum and natural gas industries - Fired heaters for general refinery service-CORR 14187: October 17, 2002;

BSI BS EN ISO 13706

Petroleum and Natural Gas Industries - Air Cooled Heat Exchangers- CORR 12058: November 2000;

BSI BS EN ISO 13709 Centrifugal pumps for petroleum, petrochemical and natural gas industries

BSI BS EN ISO 14310

Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs-CORR 14128: October 10, 2002;

BSI BS EN ISO 14691

Petroleum and Natural Gas Industries - Flexible Couplings for Mechanical Power Transmission - General Purpose Applications-CORR 13970: June 18, 2002;

BSI BS EN ISO 14692- 1

Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 1: Vocabulary, symbols, applications and materials

BSI BS EN ISO 14692- 2

Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 2: Qualification and manufacture

BSI BS EN ISO 14692- 3

Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 3: System design

BSI BS EN ISO 14692- 4

Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 4: Fabrication, installation and operation

BSI BS EN ISO 14693 Petroleum and natural gas industries Drilling and well-servicing equipment

BSI BS EN ISO 14723

Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Subsea Pipeline Valves-CORR 14174: October 15, 2002;

BSI BS EN ISO 14847

Rotary Positive Displacement Pumps - Technical Requirements- CORR 10836; February 2000;

BSI BS EN ISO 15138

Petroleum and natural gas industries Offshore production installations Heating, ventilation and airconditioning-CORR 14546: June 23, 2003;

BSI BS EN ISO 15156- 1

Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking- resistant materials-CORR 14358: February 19, 2003;

BSI BS EN ISO 15156- 2

Petroleum, petrochemical and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons

BSI BS EN ISO 15156- 3

Petroleum, petrochemical and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

BSI BS EN ISO 15761

Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries-CORR 14475: May 1, 2003; Supersedes BS 5352: 1981;

BSI BS EN ISO 16812 Petroleum and natural gas industries Shell-and-tube heat exchangers

BSI BS EN ISO 17292

Metal ball valves for petroleum, petrochemical and allied industries- Supersedes BS 5351:1986

BSI BS EN ISO 17776

Petroleum and natural gas industries Offshore production installations Guidelines on tools and techniques for hazard identification and risk assessment- AMD 14011: 10/31/2002; Renumbers BS ISO 17776: 2000

BSI BS EN ISO 19900

Petroleum and natural gas industries General requirements for offshore structures-Supersedes BS EN ISO 13819-1:1998;

BSI BS EN ISO 21049 Pumps Shaft sealing systems for centrifugal and rotary pumps

BSI BS EN ISO 4126- 1

Safety devices for protection against excessive pressure Part 1: Safety valves-Supersedes BS 6759-1:1984, BS 6759-2:1984 and BS 6759-3:1984

BSI BS EN ISO 4126- 4 Safety devices for protection against excessive pressure Part 4: Pilot operated safety valves

BSI BS EN ISO 4126- 5

Safety devices for protection against excessive pressure Part 5: Controlled safety pressure relief systems (CSPRS)

BSI BS EN ISO 4126- 6

Safety devices for protection against excessive pressure Part 6: Application, selection and installation of bursting disc safety devices

BSI BS EN ISO 4126- 7 Safety devices for protection against excessive pressure Part 7: Common data

BSI BS EN ISO 449

Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class A-AMD 10716: June, 2000

BSI BS EN ISO 5199

Technical Specifications for Centrifugal Pumps - Class II-CORR 14783: October 21, 2003; Supersedes BS EN 25199: 1992;

BSI BS EN ISO 9905

Technical Specifications for Centrifugal Pumps - Class I-AMD 9864: February 1998; Renumbers BS 7784:1994

BSI BS IEC 60079- 19

Electrical Apparatus for Explosive Gas Atmospheres Part 19: Repair and Overhaul for Apparatus Used in Explosive Atmospheres (Other than Mines or Explosives)-IEC 60079-19: 1993;

BSI BS IEC 60092- 101 Electrical Installations in Ships - Part 101: Definitions and General Requirements

BSI BS IEC 60092- 201 Electrical Installations in Ships - Part 201: System Design - General

BSI BS IEC 60092- 202 Electrical Installations in Ships - Part 202: System Design - Protection

BSI BS IEC 60092- 301 Electrical installations in ships Part 301: Equipment Generators and motors

BSI BS IEC 60092- 302

Electrical Installation in Ships - Part 302: Low-Voltage Switchgear and Controlgear Assemblies

BSI BS IEC 60092- 303 Electrical installations in ships Part 303: Equipment Transformers for power and lighting

BSI BS IEC 60092- 401 Electrical installations in ships Part 401: Installation and test of completed installation

BSI BS IEC 60092- 502 Electrical Installations in Ships - Part 502: Tankers - Special Features

BSI BS IEC 60533 Electrical and Electronic Installations in Ships - Electromagnetic Compatibility

BSI BS IEC 61363- 1

Electrical Installations of Ships and Mobile and Fixed Offshore Units Part 1: Procedures for Calculating Short-Circuit Currents in Three-Phase a.c.

BSI BS IEC 61513

Nuclear Power Plants - Instrumentation and Control for Systems Important to Safety - General Requirements for Systems

BSI BS IEC 61892- 1

Mobile and Fixed Offshore Units - Electrical Installations - Part 1: General Requirements and Conditions

BSI BS IEC 61892- 3 Mobile and Fixed Offshore Units - Electrical Installations - Part 3: Equipment

BSI BS IEC 61892- 5 Mobile and Fixed Offshore Units - Electrical Installations - Part 5: Mobile Units

BSI BS IEC 61892- 6 Mobile and Fixed Offshore Units - Electrical Installations - Part 6: Installation

BSI BS IEC 61892- 7 Mobile and Fixed Offshore Units - Electrical Installations - Part 7: Hazardous Areas

BSI BS IEC 62086- 2

Electrical Apparatus for Explosive Gas Atmospheres - Electrical Resistance Trace Heating - Part 2: Application Guide for Design, Installation and Maintenance- IEC 62086-2:2001;

BSI BS ISO 10816- 2

Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 2: Land-Based Steam Turbines and Generators in Excess of 50 MW with Normal Operating Speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

BSI BS ISO 10816- 5

Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 5: Machine Sets in Hydraulic Power Generating and Pumping Plants

BSI BS ISO 10972- 1 Cranes - Requirements for Mechanisms - Part 1: General

BSI BS ISO 11171

Hydraulic Fluid Power - Calibration of Automatic Particle Counters for Liquids-CORR 13536: April 30, 2002; Supersedes BS 5540-2: 1992

BSI BS ISO 13628- 5

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals

BSI BS ISO 13628- 6

Petroleum and Natural Gas Industries - Production and Drilling Equipment - Part 6: Design and Operation of Subsea Controls

BSI BS ISO 13628- 8

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems

BSI BS ISO 13628- 9

Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 9: Remotely Operated Tool (ROT) Intervention Systems

BSI BS ISO 13679 Petroleum and natural gas industries Procedures for testing casing and tubing connections

BSI BS ISO 15544

Petroleum and Natural Gas Industries - Offshore Production Installations - Requirements and Guidelines for Emergency Response

BSI BS ISO 15649 Petroleum and Natural Gas Industries - Piping

BSI BS ISO 15663- 2

Petroleum and Natural Gas Industries - Life-Cycle Costing - Part 2: Guidance on Application of Methodology and Calculation Methods

BSI BS ISO 15663- 3 Petroleum and Natural Gas Industries - Life Cycle Costing - Part 3: Implementation Guidelines

BSI BS ISO 3183- 3

Petroleum and Natural Gas Industries - Steel Pipe for Pipelines - Technical Delivery Conditions - Part 3: Pipes of Requirement Class C

BSI BS ISO 4308- 1 Cranes and lifting appliances Selection of wire ropes Part 1: General

BSI BS ISO 4309

CRANES - WIRE ROPES - CARE, MAINTENANCE, INSTALLATION, EXAMINATION AND DISCARD-Supersedes BS 6570:1986

BSI BS ISO 8573- 1 Compressed air - Part 1: Contaminants and purity classes

BSI BS ISO TR 15377

Measurement of Fluid Flow by Means of Pressure Differential Devices - Guidelines for Specification of Nozzles and Orifice Plates Beyond the Scope of ISO 5167-1- Supersedes BS 1042-1.2: 1989;

BSI BS ISO TR 9464 Guide to the Use of ISO 5167-1:1991

BSI BS MA 18 Salt Water Piping Systems in Ships-AMD 2101: Septemeber 1976

BSI BS MA 41 Two Tonnes General Purpose Davits-Amd 1;

BSI DD CEN/TS 13001- 3.1

Cranes General design Part 3.1: Limit states and proof of competence of steel structures-AMD 15624: March 9, 2005

BSI DD CEN/TS 13001- 3-2

Cranes General design Part 3-2: Limit states and proof of competence of wire ropes in reeving systems-AMD 15623: March 9, 2005

BSI PD 5500 Specification for Unfired fusion welded pressure vessels

BSI PD 60079- 14 Guide to the Application of BS EN 60079-14

BSI PD 8010- 1 Code of practice for pipelines Part 1: Steel pipelines on land

BSI PD 8010- 2 Code of practice for pipelines Part 2: Subsea pipelines

BSI PD CEN/TR 14549

Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive

BSI PD IEC 60079- 20

Electrical Apparatus for Explosive Gas Atmospheres - Part 20: Data for Flammable Gases and Vapours, Relating to the use of Electrical Apparatus-IEC 60079-20: 1996;

BSI PD ISO/TS 29001

Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations

BSI - PRODUCTION AND PLANT COLLECTIONDescription: This ISO Collection contains more than 2050 documents and gathers information on safety, training and quality of welds, welding and welders, as well as safety and specifications on electrical Rotating machines, Steel Forging, refrigeration and more. This collection is used by designers, specifiers and maintenance/saftey staff of such equipment.

The Collections includes:

← Welding – practises for oxy-acetelene welding, arc welding, ultrasonic examination, approval testing, maintainability of equipment, metallic materials, aluminum and alloys, destructive and non-destructive tests, consumables, procedures, more.

← Drills and Reamers – dimensions, combined drills, specifications, more. ← Electroplated Coatings – threaded components, Sherardized Coatings on Iron and Steel, more. ← Rotating Electrical Machines – general requirements, symbols, dimensions, voltage regulation,

Impulse Voltage Withstanding levels, Insulation Systems, noise limits, more. ← Oil Firing – general requirements, safety, thermal insulation of pipework, oil burning equipment,

potentially explosive atmospheres, more. ← Safety of Machinery – human elements, prevention of unexpected start-up, HEPA filters, crushing,

auditory warnings, electrical equipment, ergonomics, more. ← Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements.

Popular Standards from this Collection.

BSI BS 1157 Recommendations for Tapping Drill Sizes for Use with Fluted Taps

BSI BS 1453 Filler Materials for Gas Welding-CORR 13107: March 2001;

BSI BS 1759 Knurling wheels-AMD 7812: October 1993;

BSI BS 1872 Electroplated Coatings of Tin

BSI BS 1916 PART 1 Limits and Fits for Engineering Part 1: Limits and Tolerances-Amd 3;

BSI BS 1916 PART 2 Limits and Fits for Engineering Part 2: Guide to the Selection of Fits in BS 1916 Part 1

BSI BS 2059 Straight-sided splines and serrations-AMD 1843: April 1954; Supersedes BS 46: Part 2: 1929, BS 5015: 1927, BS A 19: Part 1: 1941, BS A 19: Part 2: 1942 and BS A 20: 1942;

BSI BS 2059/2 Summary Sheets: 2: Straight-Sided Spines. Bottom Fitting Deep (Extracted from BS 2059: 1953)

BSI BS 2569 PART 2

Sprayed Metal Coatings Part 2: Protection of Iron and Steel Against Corrosion and Oxidation at Elevated Temperatures

BSI BS 2633 Class I Arc Welding of Ferritic Steel Pipework for Carrying Fluids-AMD 10065: September 15, 1998;

BSI BS 2640 Class II Oxy-Acetylene Welding of Carbon Steel Pipework for Carrying Fluids-AMD 9749: February 15, 1998;

BSI BS 2971 Class II Arc Welding of Carbon Steel Pipework for Carrying Fluids-AMD 9773; February 1998;

BSI BS 2972 Methods of Test for Inorganic Thermal Insulating Materials

BSI BS 328 PART 1 Drills and Reamers Part 1: Specification for Twist Drills-Amd 1; (AMD 8044) April 15, 1994

BSI BS 328 PART 2 Drills and Reamers Part 2: Combined Drills and Countersinks (Centre Drills)

BSI BS 328 PART 4 Drills and Reamers Part 4: Dimensions of Reamers

BSI BS 3382 PART 7

Electroplated Coatings on Threaded Components Part 7: Thicker Platings for Threaded Components-Amd 1;

BSI BS 3382 PARTS 1 & 2

Electroplated Coatings on Threaded Components Part 1: Cadmium on Steel Components Part 2: Zinc on Steel Components-AMD 8232; November 15, 1994;

BSI BS 3382 PARTS 3 & 4

Electroplated Coatings on Threaded Components Part 3: Nickel or Nickel Plus Chromium on Steel Components Part 4: Nickel or Nickel Plus Chromium on Copper and Copper Alloy (Including Brass) Components (AMD 8908) November 15, 1995 (F)-Amd 2;

BSI BS 3382 PARTS 5 & 6

Electroplated Coatings on Threaded Components Part 5: Tin on Copper and Copper Alloy (Including Brass) Components Part 6: Silver on Copper and Copper Alloy (Including Brass) Components

BSI BS 3550 Involute Splines-Amd 2;

BSI BS 3701 Hand Operated Plate Sided Winches

BSI BS 3790 Endless Wedge Belt Drives and Endless V-Belt Drives (F)

BSI BS 3923 PART 2

Methods for Ultrasonic Examination of Welds Part 2: Automatic Examination of Fusion Welded Butt Joints in Ferritic Steels

BSI BS 4006 Hand Operated Square Drive Socket Wrenches and Accessories-AMD 8314: November 1994; AMD 8555: May 1995

BSI BS 4082 PART 1 External Dimensions for Vertical In-Line Centrifugal Pumps Part 1: I Type

BSI BS 416 PART 1

Discharge and Ventilating Pipes and Fittings, Sand-Cast or Spun in Cast Iron Part 1: Specification for Spigot and Socket Systems

BSI BS 4164 Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer

BSI BS 4533 PART 101

Luminaires Part 101: Specification for General Requirements and Test (AMD 8805) August 15, 1995-Amd 1;

BSI BS 4533 SEC 102.10

Luminaires Part 102: Particular Requirements Section 102.10: Specification for Portable Child-Appealing Luminaires (AMD 8852) December 15, 1995 (F)-Amd 2;

BSI BS 4675 PART 2

Mechanical Vibration in Rotating Machinery Part 2: Requirements for Instruments for Measuring Vibration Severity-Amd 1;

BSI BS 4677 Arc Welding of Austenitic Stainless Steel Pipework for Carrying Fluids- AMD 9767; February 15, 1998;

BSI BS 4871 PART 3

Approval Testing of Welders Working to Approved Welding Procedures Part 3: Arc Welding of Tube to Tube-Plate Joints in Metallic Materials

BSI BS 4872 PART 1

Approval Testing of Welders When Welding Procedure Approval is Not Required Part 1: Fusion Welding of Steel-Amd 1;

BSI BS 4872 PART 2

Approval Testing of Welders When Welding Procedure Approval is Not Required Part 2: TIG or MIG Welding of Aluminium and its Alloys

BSI BS 4921 Sherardized Coatings on Iron and Steel

BSI BS 499 PART 1

Welding Terms and Symbols Part 1: Glossary for Welding, Brazing and Thermal Cutting (AMD 9227) November 15, 1996 (F)-Amd 1;

BSI BS 499 PART 1 SUPP

Welding Terms and Symbols Part 1: Glossary for Welding, Brazing and Thermal Cutting Supplement: Definitions for Electric Welding Equipment (IEC 50 (851): 1991) (F)

BSI BS 499 PART 2C Welding Terms and Symbols Part 2C: Welding Symbols

BSI BS 4999 PART 0

General Requirements for Rotating Electrical Machines Part 0: General Introduction and Information on Other Parts

BSI BS 4999 PART 140

General Requirements for Rotating Electrical Machines Part 140: Voltage Regulation and Parallel Operation of A.C. Synchronous Generators

BSI BS 4999 PART 142

General Requirements for Rotating Electrical Machines Part 142: Specification for Mechanical Performance: Vibration (AMD 6542) November 30, 1990-Amd 1;

BSI BS 4999 PART 143 General Requirements for Rotating Electrical Machines Part 143: Specification for Tests

BSI BS 4999 PART 147

General Requirements for Rotating Electrical Machines Part 147: Specification for Dimensions of Brushes and Brush-Holders for Electrical Machinery-AMD 8834; October 15, 1995; Replaces BS 96: 1954 and BS 4362: Part A1: Section A1: 1968;

BSI BS 4999- 103 General requirements for rotating electrical machines Part 103: Specification for symbols

BSI BS 4999- 141

General requirements for rotating electrical machines Part 141: Specification for standard dimensions

BSI BS 4999- 145

General requirements for rotating electrical machines Part 145: Specification for winding terminations-AMD 14980: April 22, 2004

BSI BS 5078 Jig and Fixture Components

BSI BS 5410- 1 Code of Practice for Oil Firing - Part 1: Installations up to 45 kW Output Capacity for Space Heating and Hot Water Supply Purposes-CORR 13155: December 18, 2001;

BSI BS 5410- 2Code of Practice for Oil Firing - Part 2: Installations of 45 kW and Above Output Capacity for Space Heating, Hot Water and Steam Supply Services - (Formerly Part of CP 3002-1, 2 and 3)-AMD 13229:February 6,2002;

BSI BS 5429 Code of Practice for Safe Operation of Small-Scale Storage Facilities for Cryogenic Liquids

BSI BS 5493 Code of Practice for Protective Coating of Iron and Steel Structures Against Corrosion-AMD 7898; November 15, 1993; Partially Superseded by Eight Parts of BS EN ISO 12944 and BS EN ISO 14713: 1999;

BSI BS 5599 Hard Anodic Oxidation Coatings on Aluminium and Its Alloys for Engineering Purposes-AMD 10943: March 2001;

BSI BS 5686 Straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements-ISO 14: 1982;

BSI BS 5970 Code of Practice for Thermal Insulation of Pipework and Equipment in the Temperature Range -100 Degrees C to +870 Degrees C

BSI BS 6072 Method for Magnetic Particle Flaw Detection-Amd 3; Replaces BS 3889: Part 4A: 1968, BS 4124: Part 2: 1968 and BS 4397: 1969

BSI BS 6186 PART 1 Involute Splines: Metric Module Part 1: Dimensions and Tolerances-Amd 1;

BSI BS 6186PT1: ADD 1

Straight Cylindrical Involute Splines: Metric Module, Side Fit Part 1: Dimensions and Tolerances Addendum 1: Inspection (ISO 4156: 1981/ Amendment 1: 1992)

BSI BS 6207- 3 Mineral Insulated Cables with a Rated Voltage Not Exceeding 750 V - Part 3: Guide to Use-Implementation of HD 586.3: 2001;

BSI BS 6258 Hollow Steel Bars for Machining (AMD 7278) September 15, 1992-Amd 1;

BSI BS 6338 Chromate Conversion Coatings on Electroplated Zinc and Cadmium Coatings

BSI BS 6351 PART 1 Electric Surface Heating Part 1: Specification for Electric Surface Heating Devices

BSI BS 6351 PART 3

Electric Surface Heating Part 3: Code of Practice of the Installation, Testing and Maintenance of Electric Surface Heating Systems (Accordance with BS 5345)

BSI BS 6360 Specification for Conductors in Insulated Cables and Cords-AMD 6769: July 1991; AMD 7637: May 1993; AMD 8808: November 1995

BSI BS 638 PART 4

Arc Welding Power Sources Equipment and Accessories Part 4: Specification for Welding Cables-AMD 9640: September 1997;

BSI BS 638- 5 Arc welding power sources, equipment and accessories Part 5: Specification for accessories-AMD 14001: December 10, 2002;

BSI BS 6405 Non-Calibrated Short Link Steel Chain (Grade 30) for General Engineering Purposes: Class 1 and 2

BSI BS 6480 Impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33 000 V-CORR 14229: February 21, 2003;

BSI BS 6496Powder Organic Coatings for Application and Stoving to Aluminium Alloy Extrusions, Sheet and Preformed Sections for External Architectural Purposes, and for the Finish on Aluminium Alloy Extrusions, Sheet and Preformed Sections Coated with Powder Organ

BSI BS 6548 PART 2

Maintainability of Equipment Part 2: Guide to Maintainability Studies During the Design Phase (IEC 706-2: 1990)

BSI BS 6548 PART 3

Maintainability of Equipment Part 3: Guide to Maintainability Verification, and the Collection, Analysis and Presentation of Maintainability Data (IEC 706-3: 1987) (F)

BSI BS 6548 PART 6

Maintainability of Equipment Part 6: Guide to Statistical Methods in Maintainability Evaluation (IEC 706-6: 1994) (F)

BSI BS 6548- 1Maintainability of Equipment - Part 1: Guide to Specifying and Contracting for Maintainability-AMD 13156:October 31,2001; IEC 60706-1:1982; Sections 1 and 3 Superseded by BS IEC 60300-3-10:2001;

BSI BS 6746C Colour Chart for Insulation and Sheath of Electric Cables (F)

BSI BS 6990 Code of Practice for Welding on Steel Pipes Containing Process Fluids or Their Residuals-AMD 9772; February 1998;

BSI BS 7123 Metal Arc Welding of Steel for Concrete Reinforcement (AMD 7128) July 15, 1992-Amd 1;

BSI BS 7361 PART 1

Cathodic Protection Part 1: Code of Practice for Land and Marine Applications (Formerly CP 1021)

BSI BS 7371 PART 1

Coatings on Metal Fasteners Part 1: Specification for General Requirements and Selection Guidelines

BSI BS 7371 PART 2

Coatings on Metal Fasteners Part 2: Specification for Torque/Clamping Force Relationship (F)

BSI BS 7479 Method for Salt Spray Corrosion Tests in Artificial Atmospheres (ISO 9227: 1990)

BSI BS 7531 Compressed Non-Asbestos Fibre Jointing

BSI BS 7570 Code of Practice for Validation of Arc Welding Equipment

BSI BS 7655- 0 Specification for Insulating and Sheathing Materials for Cables - Part 0: General Introduction-AMD 10989: November 2000;

BSI BS 7854- 3Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts - Part 3: Industrial Machines with Nominal Power Above 15 kW and Nominal Speeds between 120 r/min and 15000 r/min When Measured In Situ-ISO 10816-3: 1998;

BSI BS 7910 Guide to methods for assessing the acceptability of flaws in metallic structures

BSI BS 799 PART 2 Oil Burning Equipment Part 2: Specification for Vaporizing Burners

BSI BS 799 PART 4

Oil Burning Equipment Part 4: Specification for Atomizing Burners (Other Than Monobloc Type) Together with Associated Equipment for Single Burner and Multi Burner Installations (F)

BSI BS 799 PART 5 Oil Burning Equipment Part 5: Oil Storage Tanks

BSI BS 817 Surface Plates

BSI BS 8202 PART 1

Coatings for Fire Protection of Building Elements Part 1: Code of Practice for the Selection and Installation of Sprayed Mineral Coatings (F)

BSI BS 8202 PART 2

Coatings for Fire Protection of Building Elements Part 2: Code of Practice for the Use of Intumescent Coating Systems to Metallic Substrates for Providing Fire Resistance

BSI BS 853- 1 Vessels for use in heating systems Part 1: Calorifiers and storage vessels for central heating and hot water supply-AMD 8979: March 1996; Supersedes BS 853: 1981;

BSI BS 874 Determining Thermal Insulating Properties with Definitions of Thermal Insulating Terms (AMD 5228) December 31, 1986-Amd 3;

BSI BS 887 Precision Vernier Callipers-AMD 9188: November 15, 1996;

BSI BS 969 Limits and Tolerances on Plain Limit Gauges-Replaces BS 4500: Part 2: 1974

BSI BS EN 1005- 1 Safety of Machinery - Human Physical Performance - Part 1: Terms and Definitions

BSI BS EN 1005- 2

Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery

BSI BS EN 1005- 3

Safety of Machinery - Human Physical Performance - Part 3: Recommended Force Limits for Machinery Operation

BSI BS EN Welding Recommendations for welding of metallic materials Part 1: General guidance for arc

1011- 1 welding-AMD 13981: October 30, 2002; AMD 14925: March 15, 2004

BSI BS EN 1011- 2

Welding - Recommendations for Welding of Metallic Materials - Part 2: Arc Welding of Ferritic Steels-AMD 14926: February 12, 2004; (Together with BS EN 1011- 1:1998) it

BSI BS EN 1011- 3

Welding Recommendations for welding of metallic materials Part 3: Arc welding of stainless steels-AMD 14927: January 28, 2004; Supersedes BS 7475:1991;

BSI BS EN 1011- 4

Welding - Recommendations for Welding of Metallic Materials - Part 4: Arc Welding of Aluminium and Aluminium Alloys-AMD 14928: January 26, 2004; Supersedes BS 3019-1:1984 and BS 3571-1:1985;

BSI BS EN 1011- 5 Welding Recommendations for welding of metallic materials Part 5: Welding of clad steel

BSI BS EN 1011- 7 Welding Recommendations for welding of metallic materials Part 7: Electron beam welding

BSI BS EN 1011- 8

Welding Recommendations for welding of metallic materials Part 8: Welding of cast irons-CORR 15497: December 9, 2004; Partially Supersedes BS 4570:1985

BSI BS EN 10250- 1 Open die steel forgings for general engineering purposes - Part 1: General requirements

BSI BS EN 10250- 2

Open die steel forgings for general engineering purposes - Part 2: Non- alloy quality and special steels-CORR 11041: August 2000; Supersedes BS 29:1976

BSI BS EN 10250- 3

Open die steel forgings for general engineering purposes - Part 3: Alloy special steels-Supersedes BS 4670: 1971

BSI BS EN 10250- 4

Open die steel forgings for general engineering purposes - Part 4: Stainless steels-Supersedes Table 11 of BS 970-1;

BSI BS EN 1037 Safety of Machinery - Prevention of Unexpected Start-Up (F)

BSI BS EN 1043- 1

Destructive Tests on Welds in Metallic Materials Hardness Testing Part 1: Hardness Test on Arc Welded Joints

BSI BS EN 1044 Brazing - Filler Metals-CORR 10912; April 2000; Supersedes BS 1845: 1984;

BSI BS EN 1050 Safety of Machinery - Principles for Risk Assessment

BSI BS EN 1088

Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection (F)

BSI BS EN 1127- 1

Explosive Atmospheres - Explosion Prevention and Protection Part 1: Basic Concepts and Methodology

BSI BS EN 1127- 2

Explosive Atmospheres - Explosion Prevention and Protection Part 2: Basic Concepts and Methodology for Mining

BSI BS EN 12062

Non-destructive examination of welds General rules for metallic materials-AMD 13986: November 1, 2002; AMD 14934: March 26, 2004

BSI BS EN 12068

Cathodic Protection - External Organic Coatings for the Corrosion Protection of Buried or Immersed Steel Pipelines Used in Conjunction with Cathodic Protection - Tapes and Shrinkable Materials

BSI BS EN 12072

Welding Consumables - Wire Electrodes, Wires and Rods for Arc Welding of Stainless and Heat-Resisting Steels - Classification-This Standrad Together with BS EN 760: 1996 Supersedes BS 2901-2: 1990 and BS 5465: 1987;

BSI BS EN 12223

Non-Destructive Testing - Ultrasonic Examination - Specification for Calibration Block No.1-Together with BS EN 27963: 1992, Supersedes BS 2704: 1978;

BSI BS EN 12329

Corrosion Protection of Metals - Electrodeposited Coatings of Zinc with Supplementary Treatment on Iron or Steel-Supersedes BS 1706:1990;

BSI BS EN 12373- 1

Aluminium and Aluminium Alloys - Anodizing - Part 1: Method for Specifying Decorative and Protective Anodic Oxidation Coatings on Aluminium-Supersedes BS 1615:1987;

BSI BS EN 12474 Cathodic Protection of Submarine Pipelines

BSI BS EN 12476 Phosphate Conversion Coatings of Metals - Method of Specifying Requirements

BSI BS EN 12517

Non-destructive testing of welds Radiographic testing of welded joints Acceptance levels-AMD 14236: February 28, 2003; AMD 14944: March 15, 2004

BSI BS EN 12696 Cathodic Protection of Steel in Concrete

BSI BS EN 12797

Brazing - Destructive Tests of Brazed Joints-AMD 14932: February 11, 2004; (Together with BS EN 12799:2000 it Supersedes BS 1723-3:1988)

BSI BS EN 12799

Brazing - Non-Destructive Examination of Brazed Joints-AMD 14933: February 2, 2004; Together with BS EN 12797:2000 it Supersedes BS 1723-3:1998

BSI BS EN 12874

Flame Arresters - Performance Requirements, Test Methods and Limits for Use-Partially Supersedes BS 7244: 1990;

BSI BS EN Non-destructive testing of welds Penetrant testing of welds Acceptance levels-AMD 13984:

1289 October 30, 2002; AMD 14936: March 11, 2004

BSI BS EN 1290

Non-destructive examination of welds - Magnetic particle examination of welds-AMD 13987: October 30, 2002; AMD 14935: March 12, 2004

BSI BS EN 1291

Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels-AMD 13988: November 1, 2002; AMD 14937: April 27, 2004

BSI BS EN 13173 Cathodic Protection for Steel Offshore Floating Structures

BSI BS EN 13174 Cathodic Protection for Harbour Installations

BSI BS EN 1320 Destructive Tests on Welds in Metallic Materials - Fracture Tests

BSI BS EN 1321

Destructive Tests on Welds in Metallic Materials - Macroscopic and Microscopic Examination of Welds-CORR 14972: February 25, 2004;

BSI BS EN 13463- 1

Non-Electrical Equipment for Potentially Explosive Atmospheres - Part 1: Basic Method and Requirements

BSI BS EN 13821

Potentially explosive atmospheres Explosion prevention and protection Determination of minimum ignition energy of dust/air mixtures

BSI BS EN 1403

Corrosion Protection of Metals - Electrodeposited Coatings - Method of Specifying General Requirements

BSI BS EN 1418

Welding Personnel - Approval Testing of Welding Operators for Fusion Welding and Resistance Weld Setters for Fully Mechanized and Automatic Welding of Metallic Materials

BSI BS EN 14324

Brazing Guidance on the application of brazed joints-Supersedes BS 1723-1:1986 and BS 1723-2:1986

BSI BS EN 1435

Non-destructive testing of welds Radiographic testing of welded joints- CORR 10616:August 1999; AMD 13985:November 15, 2002; AMD 14938:March 15, 2004; Supersedes BS 2600-1:1983, BS 2600-2:1973, BS 2910:1986 and BS 7257:1989;

BSI BS EN 14640

Welding consumables Solid wires and rods for fusion welding of copper and copper alloys Classification-Supersedes BS 2901-3:1990

BSI BS EN 1559- 1 Founding - Technical Conditions of Delivery Part 1: General

BSI BS EN 1559- 4

Founding - Technical Conditions of Delivery - Part 4: Additional Requirements for Aluminium Alloy Castings-Together with BS EN 1706: 1998, BS EN 1676: 1997 and BS EN 1559-1: 1997, it Supersedes BS 1490: 1988;

BSI BS EN 1600

Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Stainless and Heat Resisting Steels - Classification-Supersedes BS 2926: 1984;

BSI BS EN 1668

Welding Consumables - Rods, Wires and Deposits for Tungsten Inert Gas Welding of Non Alloy and Fine Grain Steels - Classification-Partially Supersedes BS 2901: Part 1: 1983;

BSI BS EN 1708- 1

Welding Basic weld joint details in steel Part 1: Pressurized components-AMD 14952:June 8,2004

BSI BS EN 1711

Non-Destructive Examination of Welds - Eddy Current Examination of Welds by Complex Plane Analysis-AMD 14942: February 5, 2004

BSI BS EN 1712

Non-destructive testing of welds Ultrasonic testing of welded joints Acceptance levels-AMD 13991: November 15, 2002; AMD 14939: April 8, 2004

BSI BS EN 1713

Non-destructive testing of welds Ultrasonic testing Characterization of indications in welds-AMD 13989: November 15, 2002; AMD 14940: April 27, 2004

BSI BS EN 1714

Non-destructive testing of welds Ultrasonic testing of welded joints- CORR 10286: October 1998; AMD 13990: November 1, 2002; AMD 14941: March 15, 2004; Supersedes BS 3923-1:1986;

BSI BS EN 1822- 4

High Efficiency Particulate Air Filters (HEPA and ULPA) - Part 4: Determining Leakage of Filter Element (Scan Method)

BSI BS EN 1834- 1

Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosives Atmospheres - Part 1: Group II Engines for Use in Flammable Gas and Vapour Atmospheres

BSI BS EN 201 Rubber and Plastics Machines - Injection Moulding Machines - Safety Requirements-AMD 10932: February 2001; Supersedes BS 6679: 1985;

BSI BS EN 287- 1 Qualification test of welders Fusion welding Part 1: Steels-CORR 15598:February 17, 2005

BSI BS EN 288- 9

Specification and Approval of Welding Procedures for Metallic Materials - Part 9: Welding Procedure Test for Pipeline Welding on Land and Offshore Site Butt Welding of Transmission Pipelines

BSI BS EN 294 Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Upper Limbs (AMD 7655) March 15, 1993 (F)-Amd 1;

BSI BS EN 29453

Soft Solder Alloys - Chemical Compositions and Forms-ISO 9453: 1990; Replaces BS 219:1977

BSI BS EN 30042

Arc-Welded Joints in Aluminium and its Weldable Alloys - Guidance on Quality Levels for Imperfections (ISO 10042: 1992) (F)

BSI BS EN 349 Safety of Machinery Minimum Gaps to Avoid Crushing of Parts of the Human Body

BSI BS EN 378- 1

Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 1: Basic Requirements, Definitions, Classification and Selection Criteria- AMD 14930: February 20, 2004; (Together with BS EN 378-2, BS EN 378-3 and BS EN 378-4: 2000)

BSI BS EN 378- 2

Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 2: Design, Construction, Testing, Marking and Documentation-Together with BS EN 378-1, BS EN 378-3 and BS EN 378-4: 2000 Supersedes BS 4434: 1995;

BSI BS EN 378- 3

Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 3: Installation Site and Personal Protection-AMD 14931: February 5, 2004; Together with BS EN 378-1, BS EN 378-2, and BS EN 378-4: 2000 Supersedes BS 4434: 1995

BSI BS EN 378- 4

Refrigerating systems and heat pumps Safety and environmental requirements Part 4: Operation, maintenance, repair and recovery-AMD 14929: January 30, 2004; Together with BS EN 378-1, BS EN 378-2, and BS EN 378-3: 2000 Supersedes BS 4434: 1995;

BSI BS EN 418 Safety of Machinery. Emergency Stop Equipment, Functional Aspects - Principles for Design (F)

BSI BS EN 439 Welding Consumables - Shielding Gases for Arc Welding and Cutting (F)

BSI BS EN 440 Welding Consumables - Wire Electrodes and Deposits for Gas Shielded Metal Arc Welding of Non Alloy and Fine Grain Steels - Classification (F)

BSI BS EN 457 Safety of Machinery - Auditory Danger Signals - General Requirements, Design and Testing

BSI BS EN 462 PART 3

Non-Destructive Testing - Image Quality of Radiographs Part 3: Image Quality Classes for Ferrous Metals-Supersedes BS 3971: 1980

BSI BS EN 462- 1

Non-Destructive Testing - Image Quality of Radiographs Part 1: Image Quality Indicators (Wire Type) - Determination of Image Quality Value-Supersedes BS 3971:1980

BSI BS EN 462- 2

Non-Destructive Testing - Image Quality of Radiographs Part 2: Image Quality Indicators (Step/Hole Type) - Determination of Image Quality Value-Supersedes BS 3971:1980

BSI BS EN 462- 4

Non-Destructive Testing - Image Quality of Radiographs Part 4: Experimental Evaluation of Image Quality Values and Image Quality Tables (F)

BSI BS EN 462- 5

Non-Destructive Testing - Image Quality of Radiographs Part 5: Image Quality Indicators (Duplex Wire Type), Determination of Image Unsharpness Value (F)- Supersedes BS 3971:1980

BSI BS EN 547- 1

Safety of Machinery - Human Body Measurements Part 1: Principles for Determining the Dimensions Required for Openings for Whole Body Access into Machinery

BSI BS EN Safety of Machinery - Human Body Measurements Part 3: Anthropometric Data

547- 3

BSI BS EN 558- 1

Industrial Valves - Face-to-Face and Centre-to-Face Dimensions of Metal Valves for Use in Flanged Pipe Systems Part 1: PN-Designated Valves (F)

BSI BS EN 558- 2

Industrial Valves - Face-to-Face and Centre-to-Face Dimensions of Metal Valves for Use in Flanged Piping Systems Part 2: Class-Designated Valves (F)

BSI BS EN 563 Safety of Machinery - Temperatures of Touchable Surfaces - Ergonomics Data to Establish Temperature Limit Values for Hot Surfaces-CORR 10961; May 2000;

BSI BS EN 571- 1

Non-Destructive Testing - Penetrant Testing Part 1: General Principles- Supersedes BS 6443: 1984;

BSI BS EN 583- 1

Non-destructive testing Ultrasonic examination Part 1: General principles- AMD 14969: April 30, 2004

BSI BS EN 583- 2 Non-Destructive Testing - Ultrasonic Examination - Part 2: Sensitivity and Range Setting

BSI BS EN 583- 3 Non-Destructive Testing - Ultrasonic Examination Part 3: Transmission Technique

BSI BS EN 583- 4

Non-destructive testing Ultrasonic examination Part 4: Examination for discontinuities perpendicular to the surface-AMD 14970: February 6, 2004

BSI BS EN 583- 5

Non-Destructive Testing - Ultrasonic Examination - Part 5: Characterization and Sizing of Discontinuities-AMD 14971: February 6, 2004

BSI BS EN 60034- 1 Rotating electrical machines Part 1: Rating and performance-AMD 14189:April 2003

BSI BS EN 60034- 12

Rotating Electrical Machines - Part 12: Starting Performance of Single- Speed Three-Phase Cage Induction Motors

BSI BS EN 60034- 14

Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher Measurement, evaluation and limits of vibration severity

BSI BS EN 60034- 15

Rotating Electrical Machines Part 15: Impulse Voltage Withstand Levels of Rotating a.c. Machines with Form-Wound Stator Coils (IEC 34-15: 1995) (F)-Supersedes BS 4999 PART 115:1992

BSI BS EN 60034-18- 1

Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 1: General Guidelines-AMD 10260; November 1998

BSI BS EN 60034-18- 21

Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 21: Test Procedures for Wire-Wound Windings - Thermal Evaluation and Classification-AMD 10264 January 15, 1999

BSI BS EN 60034-18- 31

Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 31: Test Procedures for Form-Wound Windings - Thermal Evaluation and Classification of Insulation Systems Used in Machines up to and Including 50 MVA and 15 kV- AM

BSI BS EN 60034- 2

Rotating Electrical Machines - Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery From Tests (Excluding Machines for Traction Vehicles)-Supersedes BS 4999-102: 1987

BSI BS EN 60034- 22

Rotating Electrical Machines - Part 22: AC Generators for Reciprocating Internal Combustion (RIC) Engine Driven Generating Sets

BSI BS EN 60034- 5

Rotating Electrical Machines - Part 5: Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification-Supersedes BS 4999-105:1988

BSI BS EN 60034- 6 Rotating Electrical Machines Part 6: Methods of Cooling (IC Code)

BSI BS EN 60034- 7

Rotating Electrical Machines - Part 7: Classification of Types of Construction, Mounting Arrangements and Terminal Box Position (IM Code)-AMD 13216: October 5,2001; Supersedes BS 4999-107:1987

BSI BS EN 60034- 8

Rotating electrical machines Part 8: Terminal markings and direction of rotation-CORR 15112: April 14, 2004; AMD 15054: April 21,2004; Supersedes BS 4999 Part 108: 1987; Together with BS 822-6:2004 Supersedes BS 822-6:1964

BSI BS EN 60034- 9 Rotating electrical machines Part 9: Noise limits

BSI BS EN 60071- 1 Insulation Co-Ordination Part 1: Definitions, Principles and Rules (IEC 71- 1: 1993) (F)

BSI BS EN 60071- 2

Insulation Co-Ordination Part 2: Application Guide-IEC 71-2: 1996; Supersedes BS 5622: Part 2: 1979;

BSI BS EN 60156

Insulating Liquids - Determination of the Breakdown Voltage at Power Frequency - Test Method (IEC 156: 1995) (F)

BSI BS EN 60204- 1

Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements-IEC 60204-1: 1997

BSI BS EN 60204- 11

Safety of Machinery - Electrical Equipment of Machines - Part 11: Requirements for HV Equipment for Voltages Above 1 000 V A.C. or 1 500 V D.C. and Not Exceeding 36kV-IEC 60204-11: 2000

BSI BS EN 60204- 32

Safety of Machinery - Electrical Equipment of Machines - Part 32: Requirements for Hoisting Machines-IEC 60204-32: 1998

BSI BS EN 60598-2- 7

Luminaires Part 2: Particular Requirements Section 7: Portable Luminaires for Garden Use-CORR 10563: December 1999; Supersedes BS 4533: Section 102.7: 1990

BSI BS EN 60702- 1

Mineral Insulated Cables and Their Terminations with a Rated voltage Not Exceeding 750 V - Part 1: Cables-Supersedes BS 6207-1:1995

BSI BS EN 60702- 2

Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V - Part 2: Terminations-Supersedes BS 6207-2:1995

BSI BS EN 60745-2- 5

Hand-held motor-operated electric tools Safety Part 2-5: Particular requirements for circular saws

BSI BS EN 60801- 2

Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic Discharge Requirements (IEC 801-2: 1991) (F)

BSI BS EN 60811-1- 1

Insulating and Sheathing Materials of Electric and Optical Cables - Common Test Methods - Part 1-1: General Application - Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical Properties IEC 811-1-1: 1993) (F)- AMD 13461

BSI BS EN 60893-3- 4

Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: Specifications for individual materials Requirements for rigid laminated sheets based on phenolic resins

BSI BS EN 60974- 1

Arc Welding Equipment - Part 1: Welding Power Sources-AMD 14543: September 30, 2003; Supersedes BS 638-10: 1990

BSI BS EN 60990

Methods of Measurement of Touch Current and Protective Conductor Current-IEC 60990:1999;

BSI BS EN 61310- 1

Safety of Machinery - Indication, Marking and Actuation Part 1: Requirements for Visual, Auditory and Tactile Signals (F)

BSI BS EN 614- 1

Safety of Machinery - Ergonomic Design Principles Part 1: Terminology and General Principles (F)

BSI BS EN 614- 2

Safety of Machinery - Ergonomic Design Principles - Part 2: Interactions Between the Design of Machinery and Work Tasks

BSI BS EN 676 Automatic forced draught burners for gaseous fuels

BSI BS EN 719 Welding Coordination - Tasks and Responsibilities (F)

BSI BS EN 730- 1

Gas welding equipment Safety devices Part 1: Incorporating a flame (flashback) arrestor-Together with BS EN 730-2: 2002, supersedes BS EN 730: 1995;

BSI BS EN 746- 1

Industrial Thermoprocessing Equipment Part 1: Common Safety Requirements for Industrial Thermoprocessing Equipment

BSI BS EN 746- 2

Industrial Thermoprocessing Equipment Part 2: Safety Requirements for Combustion and Fuel Handling Systems

BSI BS EN 746- 3

Industrial Thermoprocessing Equipment Part 3: Safety Requirements for the Generation and Use of Atmosphere Gases

BSI BS EN 756 Welding consumables Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels Classification

BSI BS EN 758 Welding Consumables - Tubular Cored Electrodes for Metal Arc Welding with and without a Gas Shield of Non-Alloy and Fine Grain Steels - Classification-Supersedes BS 7084: 1989

BSI BS EN 760 Welding Consumables Fluxes for Submerged Arc Welding Classification (F)

BSI BS EN 842 Safety of Machinery - Visual Danger Signals - General Requirements, Design and Testing (F)

BSI BS EN 875 Destructive Tests on Welds in Metallic Materials - Impact Tests - Test Specimen Location, Notch Orientation and Examination

BSI BS EN 876 Destructive Tests on Welds in Metallic Materials - Longitudinal Tensile Test on Weld Metal in Fusion Welded Joints-Partially Replaces BS 709: 1983

BSI BS EN 877Cast Iron Pipes and Fittings, Their Joints and Accessories for the Evacuation of Water from Buildings - Requirements, Test Methods and Quality Assurance- Supersedes BS 416-2: 1990 and BS 6087: 1990;

BSI BS EN 894- 1

Safety of Machinery - Ergonomics Requirements for the Design of Displays and Control Actuators Part 1: General Principles for Human Interactions with Displays and Control Actuators

BSI BS EN 894- 2

Safety of Machinery - Ergonomics Requirements for the Design of Displays and Control Actuators Part 2: Displays

BSI BS EN 894- 3

Safety of Machinery - Ergonomics Requirements for the Design of Displays and Control Actuators Part 3: Control Actuators

BSI BS EN 895 Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test-Partially Replaces BS 709: 1983, BS 3451: 1973 and BS 4206: 1967

BSI BS EN 910 Destructive Tests on Welds in Metallic Materials - Bend Tests (F)

BSI BS EN 953 Safety of Machinery - Guards - General Requirements for the Design and Construction of Fixed and Movable Guards

BSI BS EN 954- 1

Safety of Machinery - Safety Related Parts of Control Systems - Part 1. General Principles for Design

BSI BS EN 970 Non-Destructive Examination of Fusion Welds - Visual Examination

BSI BS EN ISO Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and

10882- 1 Gases in the Operators Breathing Zone - Part 1: Sampling of Airborne Particles-Supersedes BS 6691-1:1986;

BSI BS EN ISO 11064- 4 Ergonomic design of control centres Part 4: Layout and dimensions of workstations

BSI BS EN ISO 11064- 6 Ergonomic design of control centres Part 6: Environmental requirements for control centres

BSI BS EN ISO 12100- 1

Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology-CORR 14974: January 19, 2004;

BSI BS EN ISO 12100- 2

Safety of machinery Basic concepts, general principles for design Part 2: Technical principles-CORR 14975: January 16, 2004; Supersedes BS EN 292-2:1991

BSI BS EN ISO 12224- 1

Solder Wire, Solid and Flux Cored - Specification and Test Methods - Part 1: Classification and Performance Requirements-Together with BS EN 12224-2 it Supersedes BS 441: 1980

BSI BS EN ISO 13849- 2 Safety of machinery Safety-related parts of control systems Part 2: Validation

BSI BS EN ISO 13916

Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature

BSI BS EN ISO 13918 Welding - Studs and Ceramic Ferrules for Arc Stud Welding

BSI BS EN ISO 13919- 1

Welding - Electron and Laser Beam Welded Joints - Guidance on quality Levels for Imperfections Part 1: Steel

BSI BS EN ISO 13919- 2

Welding - Electron and Laser Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 2: Aluminium and Its Weldable Alloys-CORR 13516: October 11, 2001; AMD 14950: February 6, 2004

BSI BS EN ISO 13920

Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position

BSI BS EN ISO 14555 Welding - Arc Stud Welding of Metallic Materials

BSI BS EN ISO 1460

Metallic Coatings - Hot Dip Galvanized Coatings on Ferrous Materials - Gravimetric Determination of the Mass per Unit Area (F)

BSI BS EN ISO 1461

Hot Dip Galvanized Coatings on Fabricated Iron and Steel Articles - Specifications and Test Methods-Supersedes BS 729: 1971;

BSI BS EN ISO 1463 Metallic and oxide coatings Measurement of coating thickness Microscopical method

BSI BS EN ISO 14713

Protection Against Corrosion of Iron and Steel in Structures - Zinc and Aluminium Coatings - Guidelines-Supersedes BS 4479-6: 1990 and Partially Supersedes BS 5493: 1977;

BSI BS EN ISO 15607

Specification and qualification of welding procedures for metallic materials General rules-Supersedes BS EN 288-1:1992

BSI BS EN ISO 15609- 1

Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding-Supersedes BS EN 288- 2:1992

BSI BS EN ISO 15609- 2

Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Specification - Part 2: Gas Welding-AMD 14953: February 9, 2004

BSI BS EN ISO 15609- 3

Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 3: Electron beam welding-Supersedes BS EN ISO 9956-10:1997

BSI BS EN ISO 15609- 4

Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding-Supersedes BS EN ISO 9956- 11:1997

BSI BS EN ISO 15609- 5

Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding

BSI BS EN ISO 15610

Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables-Supersedes BS EN 288- 5:1995;

BSI BS EN ISO 15611

Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience-Supersedes BS EN 288- 6:1995;

BSI BS EN ISO 15612

Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure-Supersedes BS EN 288- 7:1995

BSI BS EN ISO 15613

Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test

BSI BS EN ISO 15614- 1

Specification and qualification of welding procedures for metallic materials Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys

BSI BS EN ISO 15614- 10

Specification and qualification of welding procedures for metallic materials Welding procedure test Part 10: Hyperbaric dry welding

BSI BS EN ISO 15614- 11

Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11: Electron and Laser Beam Welding

BSI BS EN ISO 15614- 12

Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding

BSI BS EN ISO Specification and qualification of welding procedures for metallic materials Welding

15614- 13 procedure test Part 13: Resistance butt and flash welding

BSI BS EN ISO 15614- 2

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys-Supersedes BS EN 288-4:1992

BSI BS EN ISO 15614- 4

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings

BSI BS EN ISO 15614- 5

Specification and qualification of welding procedures for metallic materials Welding procedure test Part 5: Arc welding of titanium, zirconium and their alloys

BSI BS EN ISO 15614- 8

Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 8: Welding of Tubes to Tube-Plate Joints- Supersedes BS 4870-3:1985;

BSI BS EN ISO 18273

Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification

BSI BS EN ISO 2064

Metallic and Other Inorganic Coatings - Definitions and Conventions Concerning the Measurement of Thickness

BSI BS EN ISO 2178

Non-Magnetic Coatings on Magnetic Substrates - Measurement of Coating Thickness - Magnetic Method (AMD 8482) August 15, 1995 (Formerly BS 5411: Part 11: 1984) (F)-Amd 1;

BSI BS EN ISO 2360

Non-conductive coatings on non-magnetic electrically conductive basis materials Measurement of coating thickness Amplitude-sensitive eddy current method- CORR 14983: January 22, 2004

BSI BS EN ISO 2503

Gas Welding Equipment - Pressure Regulators for Gas Cylinders Used in Welding, Cutting and Allied Processes up to 300 Bar-CORR 10464; April 2000; Supersedes BS 7650: 1993 and BS EN 585: 1995;

BSI BS EN ISO 3452- 2 Non-Destructive Testing - Penetrant Testing - Part 2: Testing of Penetrant Materials

BSI BS EN ISO 3452- 3 Non-Destructive Testing - Penetrant Testing - Part 3: Reference Test Blocks

BSI BS EN ISO 3613

Chromate Conversion Coatings on Zinc, Cadmium, Aluminium-Zinc Alloys and Zinc-Aluminium Alloys - Test Methods-CORR 13649:January 16,2002;

BSI BS EN ISO 3690

Welding and Allied Processes - Determination of Hydrogen Content in Ferritic Steel Arc Weld Metal-CORR 13119: April 2001; Supersedes BS 6693-1:1986, BS 6693-2: 1986, BS 6693-3: 1988, BS 6693-4: 1998 and BS 6693-5: 1998;

BSI BS EN ISO 3744

Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Method in an Essentially Free Field over a Reflecting Plane (AMD 8936)

December 15, 1995 (Formerly BS ISO 3744: 1994. Replaces BS 4196: Part 4: 1981) (F

BSI BS EN ISO 3746

Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Survey Method Using an Enveloping Measurement Surface over a Reflecting Plane (F)

BSI BS EN ISO 4063

Welding and Allied Processes - Nomenclature of Processes and Reference Numbers-Supersedes BS EN 24063: 1992;

BSI BS EN ISO 4527

Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods

BSI BS EN ISO 4871

Acoustics - Declaration and Verification of Noise Emission Values of Machinery and Equipment

BSI BS EN ISO 5135

Acoustics - Determination of Sound Power Levels of Noise from Air- Terminal Devices, Air-Terminal Units, Dampers and Valves by Measurement in a Reverberation Room-Supersedes BS 4773-2: 1989;

BSI BS EN ISO 5817

Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections-CORR 15106: April 12, 2004;

BSI BS EN ISO 6520- 1

Welding and Allied Processess - Classification of Geometric Imperfections in Metallic Materials - Part 1: Fusion Welding-Supersedes BS EN 26520: 1992;

BSI BS EN ISO 6520- 2

Welding and Allied Processes - Classification of Geometric Imperfections in Metallic Materials - Part 2: Welding with Pressure

BSI BS EN ISO 6789

Assembly tools for screws and nuts Hand torque tools Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure-CORR 14608: August 4, 2003; Supersedes BS EN 26789:1994;

BSI BS EN ISO 6947 Welds - Working Positions - Definitions of Angles of Slope and Rotation

BSI BS EN ISO 9013

Thermal cutting Classification of thermal cuts Geometrical product specification and quality tolerances-CORR 14615: July 30, 2003; AMD 14956: February 5, 2004

BSI BS EN ISO 9606- 2

Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys-Supersedes BS EN 287-2:1992

BSI BS EN ISO 9606- 3 Approval Testing of Welders - Fusion Welding - Part 3: Copper and Copper Alloys

BSI BS EN ISO 9606- 4 Approval Testing of Welders - Fusion Welding - Part 4: Nickel and Nickel Alloys

BSI BS EN ISO 9606- 5

Approval Testing of Welders - Fusion Welding - Part 5: Titanium and Titanium Alloys, Zirconium and Zirconium Alloys

BSI BS EN ISO 9614- 2

Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity Part 2: Measurement by Scanning

BSI BS EN ISO 9692- 1

Welding and allied processes Recommendations for joint preparation Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels-CORR 15062: March 31, 2004;

BSI BS EN ISO 9692- 3

Welding and Allied Processes - Recommendations for Joint Preparation - Part 3: Metal Inert Gas Welding and Tungsten Inert Gas Welding of Aluminium and Its Alloys- AMD 14951: February 6,2004

BSI BS EN ISO 9934- 1

Non-destructive testing Magnetic particle testing Part 1: General principles-AMD 14960: February 9, 2004;

BSI BS EN ISO 9934- 2

Non-destructive testing - Magnetic particle testing - Part 2: Detection media-Supersedes BS 4069:1982 and BS 5044:1973;

BSI BS EN ISO 9934- 3 Non-Destructive Testing - Magnetic Particle Testing - Part 3: Equipment

BSI BS ISO 11342

Mechanical Vibration - Methods and Criteria for the Mechanical Balancing of Flexible Rotors-CORR 13276: November 6, 2001; Supersedes BS 7508: 1995;

BSI BS ISO 1217 Displacement Compressors - Acceptance Tests-Supersedes BS 1571- 1:1987

BSI BS ISO 13373- 1

Condition Monitoring and Diagnostics of Machines - Vibration Conditioning Monitoring - Part 1: General Procedures

BSI BS ISO 15664 Acoustics - Noise Control Design Procedures for Open Plant

BSI BS ISO 7919- 1

Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 1: General Guidelines (F)

BSI BS ISO 7919- 2

Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Rotating Shafts - Part 2: Land - Based Steam Turbines and Generators in Excess of 50 MW with Normal Operating Speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min.

BSI BS ISO 7919- 3

Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria Part 3: Coupled Industrial Machines (F)

BSI BS ISO 9588

Metallic and Other Inorganic Coatings - Post-Coating Treatments of Iron and Steel to Reduce the Risk of Hydrogen Embrittlement

BSI BS ISO 9982

Belt Drives - Pulleys and V-Ribbed Belts for Industrial Applications - PH, PJ, PK, PL, and PM Profiles: Dimensions-Supersedes BS 7620: 1993;

BSI DD ENV 583- 6

Non-Destructive Testing - Ultrasonic Examination - Part 6: Time-Of-Flight Diffraction Technique as Method for Detection and Sizing of Discontinuities-Related Standard BS 7706: 1993;

BSI PD 5304 Guidance on safe use of machinery

BSI PD 6513 Magnetic Particle Flaw Detection

BSI PD CR ISO 15608 Welding - Guidelines for a Metallic Material Grouping System

BSI PD IEC TR 61131- 4 Programmable controllers Part 4: User guidelines