Brush Weatherseal for Pest Exclusion Door Sweep Installation.pdf · Installation Instructions for...

Installation Instructions for Sealeze Pest Control Door SweepInstallation Instructions for Sealeze Pest Control Door Sweep

Brush Weatherseal for

Pest Exclusion


Why use brush?

Brush conforms to surface irregularitiesWill not crack or tear like rubber sealsStays flexible to - 60o

Long lastingCost effectiveStops 98% of air infiltration


Brush STOPS PestsEliminate the gaps that attract them.

What You See. What THEY See.


The following illustrates a typical door sweep installation

and the necessary tools.


You will need:

Drill Bit Set With Nut Drivers - $30.00


Tools

Cordless Drill$50 to $200


Tools

Linesman’s Pliers$12.00

Reversible Screw Driver$5.00

Hack Saw$15.00

Tape measure $5.00


Step 1 – Measure.


Step 2 - Cut aluminum holder with a hacksaw.

Tip: A miter box will help make straight cuts


Step 3 - Cut the brush with bolt cutters.

Tip: Bolt cutters or pliers must be used to cut the brush in order to “pinch” off the ends. This will prevent the filaments from coming out.


Step 4 - Pry the holder open slightly to allow easy insertion

of the brush.


Step 5 - After inserting the brush, peen the ends of the

holder closed.


Step 6 - Apply to door using the provided self drilling

screws.

Note: A “touch” fit is enough for a perfect seal.


Or - use our silicone gel adhesive.


Just peel and stick!


How long will installation take?

Once you get the hang of it,less than 10 minutes!


Questions?

Feel free to contact

with any questions:

1-800-446-7325or

[email protected]

Brush Weatherseal for Pest Exclusion Door Sweep Installation.pdf · Installation Instructions for...

Documents

Transcript of Brush Weatherseal for Pest Exclusion Door Sweep Installation.pdf · Installation Instructions for...