BRUSH GASKETING - diablodoors.com · BRUSH GASKETING CONTENTS: 180O ... 35041 .....94 35061 ......

BRUSH GASKETINGCONTENTS:180O Aluminum Retainers ............................................................................................ 90-91180O Concealed Fastener Retainers ................................................................................... 9190O Aluminum Retainers ..................................................................................................... 9245O Aluminum Retainers ............................................................................................... 92-9345O Concealed Fastener Retainers ..................................................................................... 9335O Aluminum Retainers ..................................................................................................... 94Mortise Retainers ................................................................................................................. 94 Aluminum Retainers With Rain Drip ................................................................................. 94 Oak Retainers 36" Wide ...................................................................................................... 94Meeting Stiles ....................................................................................................................... 95 Automatic Door Bottoms .................................................................................................... 96

INDEX:345 ..............................94411 ..............................96434 ..............................963452 ............................944131 ............................964301 ............................965025 ............................945041 ............................945061 ............................9418041 ...................91, 9518061 ...................91, 9518062 .........................9118062W ......................94

18100 .........................9118100W ......................9418137 .........................9018175 .........................9018250 .........................9018400 .........................9018950 .........................9029324 ...................91, 9529326 ...................91, 9529344 .........................9329346 .........................9335041 .........................9435061 .........................94

45041 .........................9345061 .........................9345062 .........................9245100 .........................9345137 .........................9345175 .........................9245250 .........................9245400 .........................9290041 .........................9290062 .........................9290100 .........................9290137 .........................92293100 .......................91

PRODUCT PAGE PRODUCT PAGE PRODUCT PAGE

BR-1 89© 2009 Pemko Manufacturing Co.Rev. 4, 05.01.09

VENTURA , CA USAPH. 800.283.9988

MEMPHIS, TN USAPH. 800.824.3018

VANCOUVER, BC CANADAPH. 877.535.7888

TORONTO, ON CANADAPH. 866.243.9816

C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • PW (Painted White)

• All brush seals consist of densely compressed nylon filaments encased in high quality aluminum retainers. These products are ideally suited for hollow metal and wood door (in-door sweep, jamb/header gasketing, and split astragal) applications. Also use Pemko’s brush weatherstripping products on overhead doors, sectional doors, sliding doors, and automatic doors.

• All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes.

• Some brush products are now available in painted white aluminum with white colored nylon brush (example: 18062PWNB).

• The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force.

• Brush remains flexible down to -40°F and has a melting point above 400°F.• UV stabilized, dependable, long-lasting, cost-effective.• Nylon brush insert is designated by a “NB” following the finish code.• All brush seals come with #6 x 5/8" stainless steel sheet metal screws.• BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air

infiltration.• Punched with slotted holes for adjustment (except 35° angle types which are drilled with 1/8" hole).• All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes

supplied with black brush.

18950_NB does not come punched or drilled unless

specified otherwise.

18175_NBAVAILABLE FINISHES:C, D, G

18137_NBAVAILABLE FINISHES:C, D, G, PW



BRUSH GASKETING

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart)

180° Aluminum Retainers

BRU

SH G

ASKE

TIN

G

18950_NBAVAILABLEFINISHES:C, D

90 BR-2

www.pemko.com

C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • PW (Painted White) • SN (Satin Nickel Anodized)

BRUSH GASKETINGBRU

SH G

ASKETING


180° Aluminum Retainers (Cont.)


18041_SBAVAILABLE FINISHES:C, D, G, SN

ALTERNATE INSERT FOR 18041

18041_NBAVAILABLE FINISHES:C, D, G, SN



• Aluminum snap cover conceals mounting screws to provide a clean aesthetic appearance.

• Covers snap securely into place to deter vandalism.

• All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.

293100_NBAVAILABLE FINISHES:C, D

180° Concealed Fastener Retainers




29324_SBAVAILABLE FINISHES:C, D

BR-3 91





C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized)

BRUSH GASKETING


• Design permits use as a concealed seal for many applications.

• Slotted holes for adjustment.

• See the information section at top of page 90 for additional data on the brush weatherstrip shown on this page.








• BHMA logo represents products that meet the requirements of ANSI/BHMA 156.22-2003 for latching force and air infiltration.

• See the information section at the top of page 90 for additional data on the brush weatherstrip shown on this page.





92 BR-4

BRU

SH G

ASKE

TIN

G

www.pemko.com

C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • PW (Painted White) • SN (Satin Nickel Anodized)

BRUSH GASKETING


45° Aluminum Retainers (Cont.)

45137_NBAVAILABLE FINISHES:C, D, PW









45° Concealed Fastener Retainers



BR-5 93

BRUSH

GASKETIN

G





A (Mill Finish Aluminum) • BDG (Bright Dip Gold Anodized) • C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) PW (Painted White) • SN (Satin Nickel Anodized) • W (Solid Oak)

BRUSH GASKETING


• These products have 1/8" drilled fastener holes.


3452_NB 345_NBAVAILABLE FINISHES:BDG, C, D, G, PW, SN

Aluminum Retainers withRain Drip

AVAILABLE FINISHES:A, BDG, D, G, PW


35041_SBAVAILABLE FINISHES:C, D, G



18100WNBAVAILABLE FINISHES:W

18062WNBAVAILABLE FINISHES:W

Oak Retainers 36" Wide• These products have 1/8" drilled fastener holes.

• The ultimate design for concealed weatherstrip needs.

• Can be used on doors, windows and more.




5041_SBAVAILABLE FINISHES:A

Mortise Retainers

5041_NBAVAILABLE FINISHES:A

5061_NBAVAILABLE FINISHES:A

5025_SBAVAILABLE FINISHES:A

94 BR-6

BRU

SH G

ASKE

TIN

G

www.pemko.com

C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • SN (Satin Nickel Anodized)

• Astragals and meeting stiles on double doors often present problems because of complex conditions and requirements. Pemko offers some simple and inexpensive solutions as well as more detailed ones. Each job should be carefully studied as to the specific requirements when selecting the appropriate gasketing. Note that some astragals consist of two parts, one for each door, and should be ordered as such.

• Astragals and meeting stiles with a fire label may be mounted on pairs of doors wherein the gap meets the requirements of NFPA 80, 2-3.1.7 “ The clearance between...the meeting edges of doors swinging in pairs on the pull side shall be 1/8” ± 1/16” (3.18mm ± 1.59mm) for steel doors and shall not exceed 1/8” (3.18mm) for wood doors.”

18041_NB



• Snap covering helps prevent vandalism and adds an attractive finished look by concealing the fasteners.

• NOTE: Although drawn with a gap between the brushes, when these products are installed, brushes SHOULD make slight contact.


AVAILABLE FINISHES:C, D, G, SN




29324_SBAVAILABLE FINISHES:C, D, G



BRUSH GASKETING


Meeting Stiles

BR-7 95

BRUSH

GASKETIN

G

NOTE: Brush should mesh from 1/32" to 1/16". NOTE: Brush should

mesh from 1/32" to 1/16".

NOTE: Brush should mesh from 1/32" to 1/16".

NOTE: Brush should mesh from 1/32" to 1/16".





A (Mill Finish Aluminum) • BDG (Bright Dip Gold Anodized) • C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) • SN (Satin Nickel Anodized)

BRUSH GASKETING


Automatic Door Bottoms• When ordering, please specify if the automatic door bottom is for a semi-mortise application so that shorter screws can be provided.



411_NBLAVAILABLE FINISHES:A

4131_NBLAVAILABLE FINISHES:BDG, C, D, G, SN

434_NBLAVAILABLE FINISHES:A

4301_NBLAVAILABLE FINISHES:C, D

96 BR-8

BRU

SH G

ASKE

TIN

G

BRUSH GASKETING - diablodoors.com · BRUSH GASKETING CONTENTS: 180O ... 35041 .....94 35061 ......

Documents

Transcript of BRUSH GASKETING - diablodoors.com · BRUSH GASKETING CONTENTS: 180O ... 35041 .....94 35061 ......