Brosura Lab. Agilent

8/3/2019 Brosura Lab. Agilent

http://slidepdf.com/reader/full/brosura-lab-agilent 1/8

Agilent

RF CommunicationLab Station

For Education and Research inRF and Wireless Communication



3

• Basic RF concepts

• RF circuit design concepts

• RF communication system concepts

• Characterization of RF circuits

• Usage of CAE tools

• Simulation and building of

RF circuits

Features

• Teaching material provided in

editable format to help RF Circuit

Design lecturers to customize or

update the courseware as per their

curriculum and requirements.

• RF Transceiver Trainer has been

split into modules for the usersto mix and match these as per their

requirements. This provides

flexibility in building any RF

Subsystem, as well as for replacing

pre-defined modules with your own

modules.

• Modules can be used in standalone

mode to demonstrate basic

concepts, design principles and

characterization of transceiver’s

building block; or these can be

connected together to demonstratefully functional end-to-end RF

transceiver.

• The kit comes equipped with Lab

sheets/modules for device

characterization on typical RF

circuits such as Filter, Low Noise

Amplifier, Power Amplifier, Mixer

and Synthesizer.

• Computer aided engineering (CAE)design files based on Agilent

GENESYS™ have been provided

in order to demonstrate modeling,

design principles and simulation of

RF circuits, to facilitate easy learning.

The Agilent Technologies RF Communication Lab Station

has been specially designed with the objective of assisting

education and research in the areas of:



4

Editable slides in MS®

PowerPoint format for

the following topics:

• Advanced Transmission Line Theory

• RF/Microwave Network Analysis

• Impedance Transformation and

Impedance Matching

• RF/Microwave Filters

• Passive and Active RF Lumped

Components

• Small-Signal Amplifier (SSA) Theory

• SSA Design-Design for Maximum

Power Gain and Design for Fixed

Transducer Power Gain

• SSA Design–Low Noise Amplifier

• SSA Design–Design for Constant

Mismatch, Effective Power Gain

Lab sheets

Parameters characterized

Signal Generator N9310A andSpectrum Analyzer N9320B

Vector Network AnalyzerE5061A

Noise Figure AnalyzerN8973A with NoiseSource N4000A

Calibration Scalar offset TRM calibration or responsecalibration, depending oninstrument’s features

—

Power amplifiercharacterization

Gain, isolation, OIP3, P1dB,harmonic distortion

Gain, isolation, return loss, P1dB —

Low noise amplifiercharacterization

Gain, isolation Gain, gain flatness, insertionphase, group delay, isolation,return loss, SWR, impedance

Noise figure

Filter characterization Insertion loss, bandwidth,rejection

Insertion loss, bandwidth, groupdelay, insertion phase, rejection,

return loss, impedance

—

Mixer characterization Conversion loss, RF-to-IFisolation, LO-to-IF isolation, RFfeed through, gain compression,image reject

SWR , RF feed through, returnloss

—

Synthesizer characterization Phase noise, frequency — —

Antenna characterization Gain SWR, Return Loss, Impedance —

End-to-end system Frequency and frequencymodulation spectrum analysis.

— —

Lecture Material

Lab Sheets



5

The RF Transceiver Trainer included in

this courseware is made up of variousRF modules forming both the Transmitter

and Receiver sections of a superhet-

erodyne transceiver.

A layout showing how the instruments will be connected in the Lab Station.

Spectrum analyzerRF Signal generator

Transmitter unit Receiver unit

PC with GENESYS

Vector network analyzer

RF Transceiver Trainer



6

Agilent N9310A

RF Signal Generator

Professional performance for

general purpose testing needs

• 9 kHz to 3 GHz CW output, 20 Hz to80 kHz low frequency (LF) output

• –127 to +13 dBm output level range(maximum +20 dBm settable)

• –95 dBc/Hz SSB phase noiseComplete Feature Set

• Full sweep function: RF (9 kHz to

3 GHz) /Amplitude (–127 to +13 dBm),

LF (20 Hz to 80 kHz)

• Extensive analog modulation: AM,FM, Phase, and Pulse modulation

Easy front panel and remote operation

• Intuitive GUI offering 11 languages

• Standard USB connectivity for testautomation and memory stick

support

• SCPI command set for remote

control

Agilent N9320B

RF Spectrum Analyzer

Professional spectrum analysis

from 9 kHz to 3 GHz

• Measurement speed - minimumnon-zero span sweep time: < 10 ms

• Resolving power - RBW: 10 Hz to 1 MHz

• Sensitivity - DANL: –130 dBm, –148 dBm with preamp on

• Amplitude accuracy: overall±1.5 dB, typical ±0.5 dB

Robust measurement features for

characterizing your product easily

• Built-in power measurements:

channel power, OBW, ACP, SEMand TOI

• Built-in power meter function withAgilent U2000 series power sensor

support

• Optional tracking generator andpreamplifier

• Optional AM/FM demodulationcapability

Accessibility and ease-of-use at

your finger tips

• USB flash memory drive support forsaving measurement data or screens

• Y-axis scale indicator for easy, fastacquisition of amplitude data

• Customized power-on or “preset”enabled setups

• Standard USB and LAN interface,plus optional GPIB interface

• Multiple language user interface

Agilent ENA-L (E5061A)

Vector Network Analyzer

• Affordable, basic performance for

a wide range of applications and

device test amplifiers, filters,cables, antennas, mixers etc.

• 300 kHz to 1.5 GHz frequency range

• Integrated T/R (standard) orS-parameter Test Set (optional)

• Solution for 50 and 75 Ω devices upto 2.2 GHz

• Test set cal and self cal forsimplified calibration

• Solid-state switching for fast andreliable measurements

• Easy-to-use full test set operationfrom ENA-L

• Built-in Visual Basic® forApplications (VBA)

• 10.4 inch color LCD with touchscreen

Genesys™

Agilent Genesys

Electronic Design

Automation (EDA) software providesa complete, easy-to-use design

environment that is fast, powerful and

accurate. The Genesys Core package

allows the engineer to enter a design

and perform a linear simulation to

optimize its performance.

Product Description



7

With the Agilent RF Communication

Lab Station, you have the option of

ordering the additional instruments

based on your coursework topics

(refer to Lab Sheets in page 5).

Ordering Information

Educator’s Corner

For a more comprehensive list of

teaching tools, or additional informa-

tion on the range of available Agilent

products to meet your engineering

needs, visit the Educator’s Corner at

www.agilent.com/find/edu

To learn more about the Agilent RF

Communication Lab Station and how it

can benefit you, please visit

www.agilent.com/find/rfkit

The Agilent Educator’s Corner is a

one-stop resource for engineering

educators and researchers, designed

to help you enhance your higher

education curriculum and research

capabilities. With a wide selection of

integrated solution kits and curricu-

lums, our product offering will help

you save time and money!

At Educator’s Corner

you will find:

• Electrical engineering insight

• Pre-written and interactive

experiments

• Lecture assistance

• Reference materials

• Lab exercises

• Teaching tools

• Engineering student resources

• Research materials

• Education grants

• Product information

• Product demos/videos

• Product promotions and discounts

Product Description

Required N9310A 3 GHz RF Signal Generator

N9320B 3 GHz RF Spectrum Analyzer

N9320B-TR1 RF Transceiver kit with teaching material

Optional E5061A 1.5 GHZ Vector Network Analyzer

N8973A Nose Figure Analyzer

N4000A Noise Source

E8975L GENESYS RF Design & Simulation Software

W1141B-ED1 VEE 8.5 Pro Education version



www.agilent.com/find/emailupdates

Get the latest information on the

products and applications you select.

www.agilent.com/find/agilentdirect

Quickly choose and use your test

equipment solutions with confidence.

Agilent Email Updates

Agilent Direct

www.agilent.com/find/open

Agilent Open simplifies the process

of connecting and programming testsystems to help engineers design,

validate and manufacture electronic

products. Agilent offers open connec-

tivity for a broad range of system-ready

instruments, open industry software,

PC-standard I/O and global support,

which are combined to more easily

integrate test system development.

AgilentOpen

Remove all doubt

Our repair and calibration services

will get your equipment back to you,

performing like new, when prom-ised. You will get full value out of

your Agilent equipment through-

out its lifetime. Your equipment

will be serviced by Agilent-trained

technicians using the latest factory

calibration procedures, automated

repair diagnostics and genuine parts.

You will always have the utmost

confidence in your measurements.

For information regarding self main-

tenance of this product, please

contact your Agilent office.

Agilent offers a wide range of ad-

ditional expert test and measure-

ment services for your equipment,

including initial start-up assistance,

onsite education and training, as

well as design, system integration,

and project management.

For more information on repair and

calibration services, go to:

www.agilent.com/find/removealldoubt

For more information on Agilent Technolo-gies’ products, applications or services,please contact your local Agilent office.

The complete list is available at:

www.agilent.com/find/contactus

Americas

Canada (877) 894-4414Latin America 305 269 7500United States (800) 829-4444

Asia Pacific

Australia 1 800 629 485China 800 810 0189Hong Kong 800 938 693India 1 800 112 929Japan 0120 (421) 345Korea 080 769 0800Malaysia 1 800 888 848Singapore 1 800 375 8100Taiwan 0800 047 866Thailand 1 800 226 008

Europe & Middle East

Austria 01 36027 71571Belgium 32 (0) 2 404 93 40Denmark 45 70 13 15 15Finland 358 (0) 10 855 2100France 0825 010 700*

*0.125 €/minute

Germany 07031 464 6333Ireland 1890 924 204

Israel 972-3-9288-504/544Italy 39 02 92 60 8484Netherlands 31 (0) 20 547 2111Spain 34 (91) 631 3300Sweden 0200-88 22 55Switzerland 0800 80 53 53United Kingdom 44 (0) 118 9276201Other European Countries:www.agilent.com/find/contactusRevised: October 6, 2008

© Agilent Technologies, Inc. 2009

Printed in USA, April 6, 20095989-9169EN

Product specifications and descriptionsin this document subject to changewithout notice.

www.agilent.comwww.agilent.com/find/rfkit

Microsoft is a U.S. registered trademark of

Microsoft Corporation.

Brosura Lab. Agilent

Documents

Transcript of Brosura Lab. Agilent