Brosur ROXUL

12
GeneraL Product lnformation RoxuI stone wool products are made of RoxuI stone wool products are non-combustib[e with a meLting point of approximatety'1 000"C. They are particu- Lar[y suitab[e for thermat insuLation, f ire protection and sound reduction/absorption. RoxuLstone wooL is inorganic and contains no nutritious basaLt, a volcanic stone. substance. Therefore it witL not be attacked by microor- ganisms. MineraL wooI wiLL not rot and does not attract vermin. No CFCs, HFCs, HCFCs or asbestos are used in the manu- facture of RoxuL stone wooI products. CREATE AND PROTECT

description

rockwool

Transcript of Brosur ROXUL

  • GeneraL Product lnformationRoxuI stone wool products are made ofRoxuI stone wool products are non-combustib[e with ameLting point of approximatety'1 000"C. They are particu-Lar[y suitab[e for thermat insuLation, f ire protection andsound reduction/absorption.

    RoxuLstone wooL is inorganic and contains no nutritious

    basaLt, a volcanic stone.substance. Therefore it witL not be attacked by microor-ganisms. MineraL wooI wiLL not rot and does not attractvermin.

    No CFCs, HFCs, HCFCs or asbestos are used in the manu-facture of RoxuL stone wooI products.

    CREATE AND PROTECT

  • RockTech 5 [Stab)

    't::

    Common apptications

    RockTech S is particuLarty suited to meet the specif icationrequirements of thermaL insutation, fire protection andsound attenuation of both f Lat and sl.ightLy curved surfacesof tanks, vessets, boiIers and ducts. The fibre structure ofRockTech S provides the product with great dimensionaLstabitity and pressure resistance.

    Facings

    RockTech S products can be faced with atuminium foiIand/or gtass tissue.

    Dimensions

    Thickness Imm)............ ........25mm to 120mmLength x Width Imm]............ 1200mm x 500mm

    Note: For further information on densities and thickness,pLease contact your LocaI representative.

    Packaging and storage

    RockTech S is'shrink-wrapped in poLyethytene sheets forease of handl.ing, transportation, storage and identifica-tion. Products shoutd be stored indoors or under a water-proof covering.

    NominaI densityProduct typeRockTech S350RockTech 5450RockTech S650

    Density60kg/m3 3.74lb/f t380kg/m3 4.99 lb/tf100kg/m' 6.24 lb/tt3

    CREATE AND PROTECT

  • RockTech S [SLab)

    ,ffil: ;,'Hiri

    tltILll

    TechnicaI Parameters

    g

    E

    Product typesMaximum service temperature ["C)Fire Performance

    Water Absorption

    Water Vapour SorptionCorrosion resistance

    Non-combustibLe andA1 Fire CLassification

    s350350

    s450450

    s650650

    StandardsASTM C411BS 476 Part 4 / ASTM E 136and EN 1350'1 -1

    RockTech S products are highly water repettent, non-hygroscopic and non-capiltary.The products are tesLed in accordance loBS.Z972{partiaL immersion)/ EN1609 t< 0.5kg/m21.The water vapour sorption is tested in accordance with ASTM C 11041C 1'1 04 M is ( 0.04.% lvoL.JRoxuI sLone wooI does noL aLtack or damage other materiats with which it comes into contact,neither does it further the corrosion of metaL. No aggressive gasses are released when influ-enced by fire. RockTech S meets Lhe requirements [or use over stainIess steeL in accordancewith ASTM C 795.RockTech S conforms to BS 3958 Part 5, "Specification for bonded man-made mineraI fibresLabs', ThermaL lnsuLating materiaLs on pipes, ductwork and equipment'. Conforms to ASTMC612 'standard Specif ication f or MineraL Fibre BLock and Board ThermaL lnsulation'.

    CompLiance to standards

    CREATE AND PROTECT

  • RockTech S [StabJThermaI conductivity

    Mean Temperatures Thermat conductivity [WmK]oC RockTech RockTech RockTech

    24

    3Bo2

    149

    20t,26A316

    3?1

    s350

    0.0370.0400.0 52

    0.066

    ,5450

    0.0360_039

    0.050

    0:0630.0790.101

    9650

    0.03 6

    0.0390.049

    0.0630.07 9

    0.101

    0.123

    0.1 t\t+

    Note: Therma[ conductivity of RockTech 5 meefs the ASTM C612:Standard Specification For MineraL Fiber Block and Board ThermaIlnsuLation. For actuaL results, pLease refer to your Localre prese ntatives.

    Note: The information contained in this data sheet is betieved to becorrect at the date of publication. RockwooL Asia does not acceptresponsibiLity for the consequences of using RockTech S inapptications different from those described above.

    Handting

    RockTech S is Light and easy to cut to any shape with asharp knife.

    Compression strength

    Ptease refer to your [ocaI representative for compressionvatue data.

    CREATE AND PROTECT

    ,:

  • GeneraL Product lnformationRoxul stone wool products are made ofRoxu|' stone woot products are non-combustibLe with ametting point of approximateLy 1000'C. They are particu-LarLy suitabte for thermaLinsuLation, f ire protection andsound reduction/absorption.

    RoxuI stone wooL is inorganic and contains no nutritious

    basalt, a voLcanic stone.substance. Therefore it wiLL not be attacked by microor-ganisms. MineraLwooI wiLL not rot and does not attractvermin.

    No CFCs, HFCs, HCFCs or asbestos are used in the manu-facture of Roxul stone wooL products.

    CREATE AND PROTECT

  • RockTech B [glanket)Common app[icationsRockTech B is a Lightweight insuIation bLanket manufac-tured in a variety of thicknesses, suitabLe for thermaLin-suLation, fire protection and sound attenuation of both fLatand sLightLy curved surfaces of tanks, vessets, boiters andducts. lt is supplied in compressed roLl form for ease ofinstaLLation over Iarge areas.

    Dimensions and densities

    Packaging and storage

    RockTech B is shrink-wrapped in poLyethyLene sheets forease of handIing, transportation, storage and identifica-tion. Products shouLd be stored indoors or under a water-proof covering. For the recommended guideLines on prop-er storage and handting practices, pLease refer to yourLocaL representative.

    ThermaI conductivityProduct Thicknesstype [mm]

    Length x WidthImm]

    5000 x 6002500 x 6005000 x 5002500 x 5005000 x 6002500 x 600

    NominaL DensityIkglm3)

    60

    BO

    100

    Mean Temperaturesoc

    21,

    3B93149204260316371

    ThermaI conductivity tWmK]RockTech RockTech RockTech

    8350

    8450

    8650

    B3s00 0380.0400.0520.066

    84500.0360.03 90.0490.0 620.0790.1 01

    86500.0360.0390.0490.0620.07?0.1 01

    0.1280.163

    50

    50t55075

    Nate: ThermaL conductivity af RockTech B meets the ASTI\4 C553: Standard SpeciftcatianFor MineraL Ftber BLanket Thermal lnsuLation Far ConmerctaL and lndustriaL AppltcationsFor actual results, pLease refer ta yaur LacaL represertali ves.TechnicaI parameters

    Product typesMaximum service temperature {"C)Fire Performance

    Water Absorption

    Water Vapour SorptionCorrosion resistance

    Comptiance to standards

    Non-combustibte and A1 Fire CLassif ication

    B350350

    8450450

    8650650

    StandardsASTM C41,IBS 476 Part 4 / ASTN/ E 136and EN 13501-1

    RockTech B products are highLy water repettent, non-hygroscopic and non-capitlary.The products are tested in accordance toBS2972 {partial immersionJ / EN1609 i( 0.5kg/m'?}.The water vapour sorption is tested in accordance with ASTM C 11041C 1104 M is ( 0.04% lvoL.].Roxul stone wool does not aitack or damage other materia[s with which it comes iniocontaci, neither does it further the corrosion of metal- No aggressive gasses are reLeasedwhen inftuenced by f ire. RockTech B meets the requirements for use over staintess steeL inaccordance with ASTM C 795.RockTech B conforms to BS 3958 Part 5, 'Specif ication f or bonded man-made mineraL f ibresLabs','ThermaL Insulating materials on pipes, ductwork and equipment'. Conforms to ASTMC553'Standard Specif ication for MineratFibre BLanket ThermaL Insutation For CommerciaLand IndustriaL Apptications'.

    Note:The information contained in this data sheet is beLieved to becarrect at the date of pubLication. RockwooL Asia does not acceptresponsibility for the consequences of using RockTech B inappLications different from those described above.

    CREATE AND PROTECT

  • GeneraL Product lnformationRoxutstone wooI products are made of basalt, a votcanic slone.

    Loose WooI is a robust thermaI insutation especiaLty suit-ed for irregutarly shaped vessels and surfaces. lt consistsof Long, f ine f ibres spun from molten naturaI rock with a

    smaLI amount of dust suppression agent. Loose CR is es-pecial.Ly designed for cryogenic uses where Low leveLs oforganics are essentiaI for safety.

    CREATE AND PROTECT

  • Loose Woot And Loose C.R.Apptications

    Process temperature controt, energy conservation andpersonneI protection for irreguLarLy shaped pLant andequipment not suited to bonded Loose WooL. lt is especial-Ly suited forvatve boxes, ovens, etc. Loose CR is used onoxygen and other vessets and tanks as a dense packing inwatLs. lts use has been successfutty estabLished overmany years.

    Maximum Service Tem perature

    Recommended continuous safe operating temperature of550'C with the capabitity of handting intermittent temper-atures up to 1000'C.

    Earty Fire Hazard lndices

    When tested in accordance with AustraLian Standard 1530:Pari 3-1976, Loose WooI has the f oItowing EarLy Fire Haz-ard lndices: IAS 1530, Part 3 - '1 976 specif ies).

    This makes Loose WooLone of the most f ire-safe insu[a-tion materiats avaitabte.lgnitability {0-201............ .................0Spread of F|.ame [0-10i............ .............................0Heat Evolved [0-10]............ .............0Smoke DeveLoped (0-10)............ ....................".....0Water Vapour Sorption

    The water vapour sorption is tested in accordance withASTM C 11041C 110/+M is < 0.04% [vot.].

    Note: The information contained in this data sheet ls believed to becorrect at the date of pub[ication. RockwooI Asia does not acceptresponsibi[ity for the consequences of using Loose Wool or LooseC.R. in applications different from those described above.

    Standard Sizes & Packaging

    Potythene bags containing 12.5k9 nominaI weight.

    ThermaI Conductivity

    The thermaLconductivity of Loose WooI varies with thedensity to which it is packed. Two indicative curves aresh own.

    The thermaL conductivity of Loose WooI aIso varies withthe mean temperature of the insutation as shown in thegraph. The curves are based on measurements made witha guarded hot-ptate apparatus in accordance with BS 874:1973. The packing density for a particutar applicaiion wiLIdepend upon compression resistance and thermaL resist-ance requirements as we[[ as physicaLconstraints.

    0.08

    0.07

    0.06

    0.05

    004

    0.01

    050

    Corrosion Resistance

    RoxuI stone wooI does not attack or damage other materi-ats with which it comes into contact, neither does it fur-ther the corrosion of metat. No aggressive gasses are re-leased when inf Luenced by fire. Loose WooLand LooseC.R. meets'thd iequireme.nts for use over stainI.ess steeIin accordance with ASTM C 795.

    CREATE AND PROTECT

    0.03

    tt?

  • Roxul stone wool products are made of basalt, a volcanic stone.GeneraI Product InformationRoxuLstone wooL products are non-combustible with ameLting point of approximatety 1000"C. They are particu-LarLy suitabte for thermaI insuLation, f ire protection andsound reduction/absorpiion.

    RoxuLstone wooL is inorganic and contains no nutritious

    substance. Therefore it wiLl. not be attacked by microor-ganisms. Minerat wooLwiLI not rot and does not attractvermin.

    No CFCs, HFCs, HCFCs or asbestos are used in the manu-facture of RoxuL stone wooI products.

    CREATE AND PROTECT

  • RockTech WM tWired Mats)

    Common app[icationsRockTech WM is particuLar[y suited to meet the specifica-tion requirements of thermaLinsutation, fire protectionand sound attenuation of large process pipework, tanks,vessets, boiters and ducts. RockTech WM is suitabLewhere high temperatures combined with vibrations orhigh f ire resistance is required. Retention of the f ibres bythe 25mm [1") wire mesh prevents any cracking or break-ing. Wire mesh can be made f rom either gaLvanized steeLor stainLess steeL materiats.

    Packaging and storage

    RockTech WM is shrink-wrapped in poLyethyl.ene sheets orcIing wrap for ease of handLing, transportation, storageand identification. Products shouLd be stored indoors orunder a waterproof covering.

    Basic instat[ation guidetine

    RockTech WM can be cut to required Length and wrappedtrghtLy around the equipment. The edges of each mattressshouId be butt jointed cLoseLy together to eLiminate gapsand stitched using steeI wire. RockTech WM can be se-cured to the equipment with steeL bands or pins withspeed ctips. '

    CREATE AND PROTECT

  • RockTech WM tWired Matsl

    Dimensions and densities Standard width: '1 000mmProd ucttyp e

    wM450WM65OWM65O HD

    Nomina LdensityIkglm3lBO

    100

    128

    Length

    25

    m

    m 5.0m 5.0

    Thickness Imm)60/+"A

    4.02.5

    70 754.0 ?.525 2.52.0 2.0

    90 1002.5 2.52.5 2.5

    30

    6.0

    5.0

    406.05.0/+.0

    50

    5.0

    5.0

    /+.0

    BO

    2.5

    2.5

    2.0

    Standard width: 600mmProducttype

    WM45OWM65OWM65O HD

    NominaLdensityIkglm3)BO

    100

    128

    Length

    25

    m

    m 8.0m 8.0

    Thickness (mm)

    60

    L.0

    1.0

    3.0

    tU /5L"0 L.A4.0 4.03.0 3.0

    90 1003.0 3.03.0 3.0

    30

    8.08.0

    40

    6.06.0

    6.0

    50

    5.0

    5.0

    4.0

    BO

    3.0

    3.0

    3.0

    CREATE AND PROTECT

  • RockTech WM tWired Mats)TechnicaI Parameters

    Product typesMaximum service temperature {oClFire PerformanceWater AbsorptionCorrosion resistance

    CompLiance to standards

    WM45O450Non-com bustibLeLess than 1kglm'ZRoxuL stone wooI does not attack or damage other materiats with which itcomes into contact, neither does it further the corroslon of metaL. No aggres-sive gasses are reIeased when inf Luenced by fire. RockTech WM meets therequirements for use over staintess steeL n accordance wiih ASTM C 795.

    RockTech WM conforms to ASTM C592 Type I and ll, 'Siandard Specif ication forMinerat Fiber Bl-anket lnsulation and Blanket-Type Pipe lnsutation IMetat-MeshCoveredl {lndustriaI type)- RockTech WM compties with the requirements of BS3958: Part 3'MetaI mesh faced mats and mattresses'and can be used to sat-isfy BS 5422'lhermal insutating materiaLs on pipes, ductwork and equipment'.

    WM650650

    StandardsASTM C41 1BS 476 Part 4EN 1609

    ThermaI conductivityMean Temperatures

    oc

    24

    3B

    93

    11*9

    244

    260316

    371

    Thermat conductivity [WmKlRockTech RockTechWM45O

    0.0360.0390.049

    0.0620.0 79

    0.101

    WM65O

    0.036

    0.03 9

    0.049

    0.0 60

    0.076

    0.0920.108

    0.121+

    Note: Thermal conductivity of RockTech WM meets the ASTM C5?2:Standard Specification For Mineral Fiber Btanket lnsulation andBtanket - Type Pipe lnsuLation (Meta[-Mesh Covered) [lndustriatType). For actuaI results, p[ease refer to your locaI representatives

    Note: The information contained in this data sheet is beLieved to becorrect at the date of publication. Rockwool Asia does not acceptresponsibitity for the consequences of using RockTech WM inappLications different from those described above.

    CREATE AND PROTECT