BRO_Senior Orifice Fitting_DAN-DIF-TG-11-1003_2003-10_EN
-
Upload
energo-system -
Category
Documents
-
view
229 -
download
2
description
Transcript of BRO_Senior Orifice Fitting_DAN-DIF-TG-11-1003_2003-10_EN
Senior®® Orifice Fitting Technical Guide
Technical GuideDAN-DIF-TG-11-1003October 2003 Senior Orifice Fitting
www.daniel.com
2
Daniel Senior®® Orifice FittingThis fitting provides a fast, safe and extremely simplemethod of changing orifice plates under pressure without interrupting line flow. It eliminates costly by-passes, valves and other fittings required with conventional orifice flange installations.
Available in 2" through 48" line sizes, up to Daniel 2500flanged, and 10,000 psi (68958 kPa).
Meets all requirements and recommendations for accurate flow measurement of gas and liquid, includingAGA 14.3 requirements without compromise; full betarange; no uncertainty needs to be added to published values. AGA 14.3 retrofit available. "Soft Seal" optionavailable for ultra-tight sealing of gas products such asethylene.
Technical GuideDAN-DIF-TG-11-1003October 2003
3
DANIEL SENIOR®® ORIFICE FITTINGCATALOG NUMBERING SYSTEM
NOMINAL LINE SIZE
INTERNAL DIAMETER
FITTING STYLE01 Raised Face FlangnekTM
10 Raised Face Flanged18 Welding Neck014 Ring Joint FlangnekTM
14 Ring Joint Flanged
Daniel 1 150#3 300#5 600#6 900#7 1500#8 2500#
ORIFICE PLATE SEAL MATERIALDSC Removable Dual Seal*(up to 10")3DVS Dual Vulcanized Seal*(12" and up)TSC Removable Teflon Seal (up to 24")MSC Removable Metal Seal (up to 24")SNC Removable Snap Seal*(up to 20")
INTERNAL TRIM MATERIAL"A" Standard"AASG" Sour Gas/Corrosive ServiceNACE
WHEN ORDERING, PLEASE SPECIFY:1. Catalog Number2. Plate Material3. Plate Bore(s)4. Quantity
*Patented
Note: All products and components are subject tochange without notice in a continuing effort ofproduct improvement.
6" (6.065) 01 5 DSC "A"
Technical GuideDAN-DIF-TG-11-1003October 2003
4
Flanged FlangnekTM WeldnekTM
Operational sequence of removing an orifice plate under pressure
Technical GuideDAN-DIF-TG-11-1003October 2003
5
Special Features
Orifice Plate Sealing Units, designed and patented byDaniel, give positive seal between orifice plate andbody seats. Available for a variety of services.
Plate Carrier protects orifice plate at all times whileinserting or removing from fitting.
Top Outside Guide Brackets with pinion and rollerassembly are standard equipment on 18-inch and largerSenior Orifice Fittings. Orifice plates can be inspectedor changed without disengaging plate carrier from pinions.
Indicator Plate clearly shows the position of the slidevalve within the fitting.
Teflon Shaft Packing and Centering Rings arestandard equipment on all Daniel Senior Orifice U.C. Fittings in all sizes and ratings.
Fittings up to and including 12" line size can operate ina vertical down flow condition or positioned in horizontal flow for side opening.
Compact Design requires minimum operating space.
All Daniel Senior Orifice Fittings are designed andmanufactured to meet latest API/AGArecommendations, and in strict accordance with latestA.S.T.M. specifications.
6
Special FeaturesHigh Pressure Fittings
DOUBLE ROW SET SCREWS(CONSTRAINING FORCEDIRECTLY OVER GASKET)
EXTRA HEAVYCLAMPING ANDSEALING BARS
THIN SECTION ON INTERNALEDGE FOR FLEXIBLE LIP SEAL,YIELDING EASILY TO PRESSURE
HEAVY SECTION ON EXTERNAL EDGE TOPREVENT COMPRESSIONDRIFT BETWEEEN JOINT
FORCE EXERTED ONSURFACE TENDING TOCHANGE ITS SHAPEWILL NOT AFFECTGASKET SEAL
CONSTANT PRESSURESEALS GASKET AT ALLTIMES
DANIEL “COMPO-FLEX”SEALING BAR GASKET
ALLOY STEEL STUDS
CORROSION RESISTANTVALVE SEAT
HEAVY WALL SECTIONS
OVERSIZE STUFFING BOX UNITS
PARTIAL SIDE SECTIONAL ELEVATION
Daniel 1500Daniel 2500 (See Note A)
The drawing above shows in detail the extra-heavy construction of the wall sections and essential parts onthe Daniel 1500 Senior Orifice Fitting.
NOTE: Body/Top Gasket-peroxide cured Nitrile O-ringfor Daniel 1500 Orifice Fittings. Male and female gas-ket joint with Parker seal gaskets for Daniel 2500Orifice Fitting.
"TS" (All-Teflon) Orifice Plate Sealing Unit is standard inDaniel 900, 1500, and 2500 fittings.
Daniel Method of Aligning Meter TubeFlange to Orifice Fitting Flange
METER TUBE FLANGE FITTING FLANGE
Daniel 125 thru 300 Daniel 400 and higher
On all sizes, Daniel 300 or under, three dowel pinflange-alignment holes are drilled in the flanges.
Daniel 400 or higher, flanges are manufactured withclose-tolerance, square-shouldered, large male flange-facing on fitting and large female flange-facingon meter tube to assure proper internal alignment.Flange gaskets are precision-cut so that under compression they will not extend into internal bore of fitting. Refer to engineering drawing above.
In Daniel Senior Orifice Fittings, the valve seat (Part No.18) is a part of the upper chamber. The valve strip(Part No. 3) moves underneath this seat, thus utilizingline pressure to affect a positive seal. The valve strip ismaintained in "floating" position by minimum springpressure.
Before slide valve is opened, it is lubricated through
grease gun (Part No. 23). Pressure is then equalizedthroughout the entire fitting by operation of the equalizer valve (Part No. 1). Equalized pressure onboth sides of the valve strip allows slide valve to movefreely without wear. Valve seat and valve strip areground for tight shut-off and are easily removable forgrinding if required.
SLIDE VALVE DETAILCONTINUOUS GREASE GROOVE(Encircle Valve Opening)
EQUALIZER PASSAGEWAYS
EQUALIZERVALVE(Part No. 1)
VALVE STRIP(Part No. 3)
LOWER COMPARTMENT
UPPER COMPARTMENT
GREASE GUN(Part No. 23)
VALVE SEAT
(Part No. 18)VALVE
CARRIER(Part No. 17)
Clearance pad preventsValve from being closeduntil plate carrier is fully
centered in the line.
7
Standard Specifications
Meter Taps: All Daniel Orifice Fittings are providedwith two sets of "Flange Taps," located in accordancewith latest API 14.3 (AGA Report #3) recommendations.
Flange Tap Specifications: Flange tap meterconnections are ½" N.P.T. Internal tap hole sizes followlatest API 14.3 (AGA Report #3) recommendations.Internal edges of tap holes are free from burrs andsquare edged.
Line Bore Tolerances: 2-inch and 3-inch sizes, plusor minus .003", 4, 6, 8, 10-inch sizes, plus or minus.004"; 12-inch and 14-inch plus or minus .005". Unlessotherwise specified, all fittings are furnished withstandard internal line bore as listed in dimensionaltables.
Operating Shafts: On sizes 2-inch to 14-inch inclu-sive, single end operating shafts are standard on leftside of fitting when looking downstream. On sizes 16-inch and larger, operating shafts on both sides of fittingare standard.
The Senior Orifice Fitting is composed of two independent compartments separated by a hardenedstainless steel slide valve.
Side sectional view below left shows the slide valve inclosed position and orifice plate concentric in line offlow. Slide valve cannot be closed unless orifice is concentric to bore of fitting, or in upper chamber duringplate removal.
Photo, below right, shows the Daniel top closure inopened position with plate carrier in place for change orinspection of orifice plate. Only a few turns of thespeed wrench are required to loosen screws to removeor replace clamping and sealing bars. Set screws
always remain in clamping bar. This feature addsgreatly to speed and ease of operation.
Plate carrier is raised and lowered by double rack andpinion mechanism with power applied through speedwrench. This method provides the quickest means ofoperation with the least amount of effort and assurespositive control of plate carrier at all times.
All parts, including the essential slide valve assembly,may be replaced or repaired without removing fittingfrom line.
Temperature Units: Standard trim fittings Daniel 150-900 are suitable for -20 to +450°F service. Daniel 1500and 2500 are suitable for service in -20 to +275°F.However, the Orifice Plate Seal used may limit the service temperatures. Special trims and seals areavailable for higher or lower temperature service.Please consult factory.
Indicator Plates: Standard on all Senior OrificeFittings, this plate clearly shows the direction of theopen and close position of the Slide Valve.
Operating Wench: A speed wrench is provided witheach fitting for quick operation of the shaft and pinions, equalizer valve, grease gun, bleed valve andclamping bar screws.
Hydrostatic Testing: All Daniel Senior Orifice U.C. Fittings are hydrostatically tested to 1.5 timesoperating pressure.
Plate Alignment: The plate carriers in all SeniorOrifice Fittings are centered using a fixed three pointpositioning system. This assures concentricity withinthe fitting in accordance with the latest API 14.3 (A.G.A.Report #3).
SIDE SECTIONAL VIEW
8
FLANGNEKTM - RAISED FACE 2”-14” Daniel 150-900
Dia
m. I
nter
nal L
ine
Bor
e
Ups
tream
Fac
e of
Orif
ice
Pla
te to
Fac
eof
End
Dow
nstre
am F
ace
ofO
rific
e P
late
to F
ace
of E
nd
Ove
rall
Face
to F
ace
Ope
ratin
g C
lear
ance
From
Cen
ter
Bod
y C
lear
ance
From
Cen
ter
Cen
terli
ne to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
r Pla
teC
hang
ing
Dia
met
er fo
Fla
nge
Dia
mer
ter o
f Bol
tC
ircle
Dia
met
er o
f Rai
sed
Face
+.0
00 -.
005
Hei
ght o
f Rai
sed
Face
Flan
ge T
hick
ness
Num
ber a
ndD
iam
eter
of B
olts
or
Stud
s (P
er F
lang
e)
Leng
th o
f Bol
ts (S
q.H
ead
with
Hex
. Nut
)
Leng
th o
f Bol
t-Stu
dsw
ith 2
Hex
. Nut
s
Dia
met
er o
f Hub
at
Poi
nt o
f Wel
ding
Siz
e of
Dra
in P
lugs
Orif
ice
Pla
teTh
ickn
ess
App
rozi
mat
e W
eigh
t(P
ound
s)
SIZE A B C D F G H I I1 J K L M N O P R SIZECatalog No. 011DS-Daniel 150 -Dual Seal
23468
101214
2.0673.0684.0266.0658.071
10.13612.09013.250
5 1/45 5/165 7/165 9/166 1/8 6 3/87 3/87 3/8
5 1/45 5/165 7/165 9/166 1/86 3/86 3/87 3/8
10 5/810 3/4
1111 1/412 1/2
131415
12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8
4 1/45 3/85 7/86 3/4
89
10 3/411
3 3/44
4 1/25 1/26 3/4
89 1/2
10 1/2
13 1/414 1/215 3/418 3/421 3/424 7/8
2831 5/8
5 9/166 1/16
7911
13 1/81517
67 1/2
911
13 1/2161921
4 3/46
7 1/29 1/211 3/414 1/4
1718 3/4
3 5/85
6 3/168 1/2
10 5/812 3/4
1516 1/4
1/161/161/161/161/161/161/161/16
3/415/1615/16
11 1/8
1 3/161 1/41 3/8
4- 5/84- 5/88- 5/88- 3/48- 3/4
12- 7/812- 7/8
12- 1 1/8
2 3/433
3 1/43 1/23 3/4
44 1/4
3 1/43 3/43 3/4
44 1/44 3/44 3/45 1/2
2.3753.5004.5006.6258.625
10.75012.75014.000
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
100140185265345465655945
23468
101214
Catalog No. 013DS-Daniel 300 -Dual Seal23468
101214
2.0673.0684.0266.0658.071
10.13612.09013.250
5 1/45 1/26 1/4
615/166 7/88 1/88 7/89 3/8
5 1/45 1/25 5/8
6 15/166 7/87 1/87 7/89 3/8
10 5/811 1/8
121414
15 1/21719
12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8
4 1/45 3/85 7/8
789
10 3/411
3 3/44 1/8
56 1/47 1/28 3/4
10 1/411 1/2
13 1/414 1/215 3/418 3/421 3/424 7/8
2831 5/8
5 9/166 1/16
7911
13 1/815
17 9/16
6 1/28 1/4
1012 1/2
1517 1/220 1/2
23
56 5/87 1/8
10 5/813
15 1/417 3/420 1/4
3 5/85
6 3/168 1/2
10 5/812 3/4
1516 1/4
1/161/161/161/161/161/161/161/16
7/81 1/81 1/4
1 7/161 5/81 7/8
22 1/8
8- 5/88- 3/48- 3/4
12- 3/412- 7/816- 1
16- 1 1/820- 1 1/8
33 1/23 3/44 1/44 3/45 1/45 3/4
6
3 1/24 1/44 1/24 3/45 1/26 1/46 3/4
7
2.3753.5004.5006.6258.625
10.75012.75014.000
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
10015020033048061511101105
23468
101214
Catalog No.15DS-Daniel 600 -Dual Seal23468
101214
2.0673.0684.0266.0657.981
10.02011.93813.125
5 1/46 15/166 9/167 15/16
8 5/89
9 13/1610 1/4
5 1/46 15/166 9/167 15/16
8 5/88
8 13/1610 1/4
10 5/814
13 1/416
17 1/217 1/418 7/820 3/4
12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8
4 1/45 3/86 1/8
789
10 3/411 7/8
3 3/44 1/85 3/8
78 1/4
1011
11 7/8
13 1/414 1/215 3/418 3/421 3/424 7/8
2831 5/8
5 9/166 1/16
7911
13 1/815
17 9/16
68 1/4
10 3/414
16 1/22022
23 3/4
56 5/88 1/211 1/213 3/4
1719 1/420 3/4
3.6255.0006.1888.500
10.62512.75015.00016.250
1/41/41/41/41/41/41/41/4
1 1/41 1/21 3/42 1/8
2 7/162 3/42 7/8
3
8- 5/88- 3/48- 7/812- 1
12- 1 1/816- 1 1/420- 1 1/420- 1 3/8
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
4 1/45
5 3/46 3/47 3/48 1/28 3/49 1/2
2.3753.5004.5006.6258.625
10.75012.75014.000
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
105160265400595745
12151475
23468
101214
Catalog No.016TS-Daniel 900 -Teflon Seal23468
101214
††††††††
6 15/166 15/167 13/168 9/169 1/16
10 13/1611 9/1611 1/16
6 15/166 15/167 1/167 15/169 1/16
10 13/1611 9/1611 1/16
141415
16 5/818 3/821 7/823 3/822 3/8
12 7/813 3/414 1/815 1/217 1/418 3/820 3/8
21
5 3/45 3/86 1/8
79 1/8
1112
12 3/8
4 1/44 3/45 3/47 1/29 1/4
10 3/412
12 3/16
13 3/414 1/215 3/418 3/421 3/424 7/8
2831 11/16
5 9/166 1/16
7911
13 1/815
17 9/16
8 1/29 1/211 1/2
1518 1/221 1/2
2425 1/4
6 1/27 1/29 1/4
12 1/215 1/218 1/2
2122
3.6255.0006.1888.500
10.62512.75015.00016.250
1/41/41/41/41/41/41/41/4
1 3/41 3/4
22 7/162 3/4
33 3/83 5/8
8- 7/88- 7/8
8- 1 1/812- 1 1/812- 1 3/816- 1 3/820- 1 3/820- 1 1/2
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
5 3/45 3/46 3/47 3/48 3/49 1/4
1011 1/4
2.3753.5004.5006.6258.625
10.75012.75014.000
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
205215300490
1095155519352115
23468
101214
† To be specified by purchaser.Sizes 12" and 14" up to Daniel # 900 contain "DVS" Seal Vulcanized to plate.
9
FLANGNEKTM - RING JOINT 2”-14” Daniel 600 & 900
A.P
.I. R
ing
Num
ber
Dia
m. I
nter
nal L
ine
Bor
e
Ups
tream
Fac
e of
Orif
ice
Pla
te to
Fac
e of
End
Dow
nstre
am F
ace
of O
rific
eP
late
to F
ace
of E
nd
Ove
rall
Face
to F
ace
Ope
ratin
g C
lear
ance
Fro
mC
ente
r
Bod
y C
lear
ance
Fro
mC
ente
r
Cen
terli
ne to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
r Pla
teC
hang
ing
Dia
met
er o
f Fla
nge
Dia
met
er o
f Bol
t Circ
le
Pitc
h D
iam
eter
of R
ing
and
Gro
ove
Dep
th o
f Gro
ove
Wid
th o
f Gro
ove
Flan
ge T
hick
ness
Num
ber a
nd D
iam
eter
of
Bol
t-Stu
ds (P
er F
lang
e)
Leng
th o
f Bol
t-Stu
ds w
ith 2
Hex
. Nut
s
Dia
met
er o
f Hub
at P
oint
of
Wel
ding
Siz
e of
Dra
in P
lug
Orif
ice
Pla
te T
hick
ness
App
rozi
mat
e W
eigh
t(P
ound
s)
SIZE A B C D F G H I I1 J K L2 M1 M2 N1 O P R SIZECatalog No. 0145DS-Daniel 600 -Dual Seal
23468
101214
R-23R-31R-37R-45R-49R-53R-59R-61
2.0673.0684.0266.0657.981
10.02011.93813.125
5 5/167
6 5/88
8 11/169 1/169 7/8
10 5/16
5 5/167
6 5/88
8 11/168 1/168 7/8
10 5/16
10 3/414 1/813 3/816 1/817 5/817 3/8
1920 7/8
12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8
4 1/45 3/86 1/8
78 9
10 3/411 7/8
3 3/44 1/85 3/8
78 1/4
1011
11 7/8
13 1/414 1/215 3/418 3/421 3/424 7/8
2831 5/8
5 9/166 1/16
7911
13 1/815
17 9/16
6 1/28 1/4
10 3/414
16 1/22022
23 3/4
56 5/88 1/211 1/213 3/4
1719 1/420 3/4
3 1/44 7/85 7/8
8 5/1610 5/812 3/4
1516 1/2
5/165/165/165/165/165/165/165/16
15/3215/3215/3215/3215/3215/3215/3215/32
1 5/161 9/161 13/162 3/162 1/2
2 13/162 15/163 1/16
8- 5/88- 3/48- 7/812- 1
12- 1 1/816- 1 1/412- 1 1/420- 1 3/8
4 1/25 1/4
678
8 3/49
9 3/4
2.3753.5004.5006.6258.625
10.75012.75014.000
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
105160265400595745
12151475
23468
101214
Catalog No. 0146TS-Daniel 900 -Teflon Seal23468
101214
R-24R-31R-37R-45R-49R-53R-57R-62
††††††††
77
7 7/88 5/89 1/8
10 7/811 5/8
11 1/16
77
7 1/88
9 1/810 7/811 5/811 1/4
14 1/814 1/815 1/816 3/418 1/2
2223 1/2
22 9/16
12 7/813 3/414 1/815 1/217 1/418 3/820 3/8
21
5 3/45 3/86 1/8
79 1/8
1112 1/412 1/8
4 1/44 3/45 3/47 1/29 1/4
10 3/412
12 13/16
13 3/414 1/215 3/418 3/421 3/424 7/8
2831 11 /16
5 9/166 1/16
7911
13 1/815
17 9/16
8 1/29 1/211 1/2
1518 1/221 1/2
2425 1/4
6 1/27 1/29 1/4
12 1/215 1/218 1/2
2122
3 3/44 7/85 7/88 1/3
10 5/812 3/4
1516 1/2
5/165/165/165/165/165/165/167/16
15/3215/3215/3215/3215/3215/3215/3221/32
1 13/161 13/162 1/162 1/2
2 13/163 1/163 7/163 13/16
8- 7/88- 7/8
8- 1 1/812- 1 1/812- 1 3/816- 1 3/820- 1 3/820- 1 1/2
66789
9 1/210 1/411 3/4
2.3753.5004.5006.6258.625
10.75012.75014.000
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
205215300490
1095155519352115
23468
101214
† To be specified by purchaser.Sizes 12" and 14" up to Daniel 900 contain "DVS" Seal Vulcanized to plate.
Technical GuideDAN-DIF-TG-11-1003October 2003
10
FLANGNEKTM - RAISED FACE 2”-12” Daniel 1500 & 2”- 6” Daniel 2500
Dia
m. I
nter
nal L
ine
Bor
e
Ups
tream
Fac
e of
Orif
ice
Pla
te to
Fac
e of
End
Sow
nstre
am F
ace
ofO
rific
e P
late
to F
ace
ofE
nd
Ove
rall
Face
to F
ace
Ope
ratin
g C
lear
ance
From
Cen
ter
Bod
y C
lear
ance
Fro
mC
ente
r
Cen
terli
ne to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
r Pla
teC
hang
ing
Dia
met
er o
f Gla
nge
Dia
met
er o
f Bol
t Circ
le
Dia
met
er o
f Rai
sed
Face
+.0
00 -.
005
Hei
ght o
f Rai
sed
Face
Flan
ge T
hick
ness
Num
ber a
nd D
iam
eter
of B
olt-S
tuds
(Per
Flan
ge)
Leng
th o
f Bol
t-Stu
dsw
ith 2
Hex
. Nut
s
Dia
met
er o
f Hub
at
Poi
nt o
f Wel
ding
Siz
e of
Dra
in P
lugs
Orif
ice
Pla
te T
hick
ness
App
rozi
mat
e W
eigh
t(P
ound
s)
SIZE A B C D F G H I I1 J K L M N O P R SIZECatalog No. 017-TS-Daniel 1500 -Teflon Seal
23468
1012
†††††††
6 15/168 3/168 3/8
10 3/411 23/3212 5/1613 5/16
6 15/167 11/167 7/8
10 3/1611 5/3212 5/1613 5/16
1416
16 3/821 1/1623 1/824 4/826 7/8
12 7/813 3/4
1516
17 1/418 3/820 1/4
5 3/45 5/86 1/27 3/49 3/4
1112 3/8
4 1/45 1/46 1/87 3/49 1/211 1/213 1/4
13 3/414 7/816 1/819 1/822 1/8
2628 1/4
5 9/166 1/16
7911
13 1/815
8 1/210 1/212 1/415 1/2
1923
26 1/2
6 1/28
9 1/212 1/215 1/2
1922 1/2
3.6255.0006.1888.500
10.62512.75015.000
1/41/41/41/41/41/41/4
1 3/42 1/82 3/83 1/23 7/84 1/25 1/8
8- 7/88- 1 1/48- 1 1/4
12- 1 3/812- 1 5/812- 1'7/8
16- 2
5 3/47
7 3/410 1/411 1/213 1/414 3/4
2.3753.5004.5006.6258.625
10.75012.750
1/21/23/43/43/43/43/4
1/81/81/81/81/41/41/4
205 275 445 710
1240 1745 2805
23468
1012
Catalog No. 018TS-Daniel 2500 -Teflon Seal
2346
††††
8 5/89 9/1610 1/212 1/2
8 5/89 9/1610 1/212 1/2
17 3/819 1/421 1/825 1/8
15 1/815 1/816 1/417 1/2
7 1/47 1/47 3/49 1/2
667
9 1/2
16 7/816 7/8
1719 1/8
77
7 3/89
9 1/4121419
6 3/49
10 3/414 1/2
3.6255.0006.1888.500
1/41/41/41/4
2 1/42 7/83 1/44 1/2
8- 18- 1 1/48- 1 1/2
8- 2
78 3/4
1013 3/4
2.3753.5004.5006.625
1/21/23/43/4
1/81/81/81/8
520 575 715 1195
2346
† To be specified by purchaser.
Technical GuideDAN-DIF-TG-11-1003October 2003
11
FLANGNEKTM - RING JOINT2”-12” Daniel 1500 & 2”- 6” Daniel 2500
A.P
.I. R
ing
Num
ber
Dia
m. I
nter
nal L
ine
Bor
e
Ups
tream
Fac
e of
Orif
ice
Pla
te to
Fac
e of
End
Dow
nstre
am F
ace
ofO
rific
e P
late
to F
ace
of E
nd
Ove
rall
Face
to F
ace
Ope
ratin
g C
lear
ance
Fro
mC
ente
r
Bod
y C
lear
ance
Fro
mC
ente
r
Cen
terli
ne to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
r Pla
teC
hang
ing
Dia
met
er o
f Fla
nge
Dia
met
er o
f Bol
t Circ
le
Pitc
h D
iam
eter
of R
ing
and
Gro
ove
Dep
th o
f Gro
ove
Wid
th o
f Gro
ove
Flan
ge T
hick
ness
Num
ber a
nd D
iam
eter
of
Bol
t-Stu
ds (P
er F
lang
e)
Leng
th o
f Bol
t-Stu
ds w
ith 2
Hex
. Nut
s
Dia
met
er o
f Hub
at P
oint
of
Wel
ding
Siz
e of
Dra
in P
lug
Orif
ice
Pla
te T
hick
ness
App
roxi
mat
e W
eigh
t(P
ound
s)
SIZE A B C D F G H I I1 J K L2 M1 M2 N1 O P R SIZECatalog No. 0147-TS-Daniel 1500 -Teflon Seal
23468
1012
R-24R-35R-39R-46R-50R-54R-58
†††††††
78 1/4
8 7/1610 7/8
11 29/3212 1/213 5/8
77 3/4
7 15/1610 5/1611 11/3212 1/213 5/8
14 1/816 1/816 1/2
21 5/1623 1/225 1/427 1/2
12 7/813 3/4
1516 1/817 1/418 3/820 1/4
5 3/45 5/86 1/27 3/49 3/4
1112 3/8
4 1/45 1/46 1/87 3/49 1/211 1/213 1/4
13 3/414 7/816 1/819 1/822 1/8
2628 1/4
5 9/166 1/16
7911
13 1/815
8 1/210 1/212 1/415 1/2
1923
26 1/2
6 1/28
9 1/212 1/215 1/2
1922 1/2
3 3/45 3/86 3/8
8 5/1610 5/812 3/4
15
5/165/165/163/8
7/167/169/16
15/3215/3215/3217/3221/3221/3229/32
1 3/162 3/162 7/163 5/8
4 1/164 11/165 7/16
8- 7/88- 1 1/88- 1 1/4
12- 1 3/812- 1/5/812- 1 7/8
16- 2
67 1/4
810 1/2
1213 3/415 1/4
2.3753.5004.5006.6258.625
10.75012.750
1/81/23/43/43/43/43/4
1/81/81/81/81/41/41/4
205275445710
124017452805
23468
1012
Catalog No. 0148-TS-Daniel 2500 -Teflon Seal2346
R-26R-32R-38R-47
††††
8 11/169 11/16
10 11/1612 3/4
8 11/169 11/16
10 11/1612 3/4
17 1/219 1/221 1/225 5/8
15 1/815 1/816 1/417 1/2
7 1/47 1/47 3/49 1/2
667
9 1/2
16 7/816 7/8
1719 /18
77
7 3/89
9 1/4121419
6 3/49
10 3/414 1/2
45
6 3/169
5/163/8
7/161/2
15/3217/3221/3225/32
2 5/163
3 7/164 3/4
8- 18- 1 1/48- 1 1/2
8- 2
7 1/49
10 1/214 1/4
2.3753.5004.5006.625
1/21/23/43/4
1/81/81/81/8
5205757151195
2346
† To be specified by purchaser. Sizes 12" and 14" up to Daniel 900 Contain "DVS" Seal Vulcanized to plate.
Technical GuideDAN-DIF-TG-11-1003October 2003
12
FLANGED - RAISED FACE 2”-14” Daniel 150 - 900
Dia
m. I
nter
nal L
ine
Bor
e
Ups
tream
face
of
Orif
ice
Pla
te to
Fac
e of
End
Dow
nstre
am F
ace
ofO
rific
e P
late
to F
ace
ofE
nd
Ove
rall
Face
to F
ace
Ope
ratin
g C
lear
ance
From
Cen
ter
Bod
y C
lear
ance
Fro
mC
ente
r
Cen
terli
ne to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
r Pla
teC
hang
ing
Dia
met
er o
f Fla
nge
Dia
met
er o
f Bol
t Circ
le
Dia
met
er o
f Rai
sed
Face
+.0
00 -.
005
Hei
ght o
f Rai
sed
Face
Flan
ge T
hick
ness
Num
ber a
nd D
iam
eter
of B
otls
or S
tuds
)per
Gla
nge)
Leng
th o
f Bol
ts (S
q.H
ead
with
Hex
. Nut
)
Leng
th o
f Bol
t-Stu
dsw
ith 2
Hex
. Nut
s
Siz
e of
Dra
in P
lugs
Orif
ice
Pla
te T
hick
ness
App
roxi
mat
e W
eigh
t(P
ound
s)
SIZE A B C D F G H I I1 J K L M N P R SIZECatalog No. 101DS-Daniel 150 -Dual Seal
23468
101214
2.0673.0684.0266.0658.071
10.13612.09013.250
5 1/45 5/165 7/165 9/166 1/86 3/87 3/87 3/8
5 1/45 5/165 7/165 9/166 1/86 3/86 3/87 3/8
10 5/810 3/4
1111 1/412 1/2
131415
12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8
4 1/45 3/85 7/86 3/4
89
10 3/411
3 3/44
4 1/25 1/26 3/4
89 1/2
10 1/2
13 1/414 1/215 3/418 3/421 3/424 7/8
2831 5/8
5 9/166 1/16
7811
13 1/815
17 9/16
67 1/2
911
13 1/2161921
4 3/46
7 1/29 1/211 3/414 1/4
1718 3/4
3 5/85
6 3/168 1/2
10 5/812 3/4
1516 1/4
1/161/161/161/161/161/161/161/16
3/415/1615/16
11 1/8
1 3/161 1/41 3/8
4- 5/84- 5/88- 5/88- 3/48- 3/4
12- 7/812- 7/812- 1
2 3/433
3 1/43 1/23 3/4
44 1/4
3 1/43 3/43 3/4
44 1/44 3/44 3/45 1/2
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
105150245285375510720
1030
23468
101214
Catalog No. 103DS-Daniel 300 -Dual Seal23468
101214
2.0673.0684.0266.0658.071
10.13612.09013.250
5 1/45 1/26 1/47 1/46 7/88 1/88 7/89 3/8
5 1/45 1/25 5/86 5/86 7/87 1/87 7/89 3/8
10 5/811 1/8
121414
15 1/21719
12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8
4 1/45 3/85 7/8
789
10 3/411
3 3/44 1/8
56 1/47 1/28 3/4
10 1/411 1/2
13 1/414 1/215 3/418 3/421 3/424 7/8
2831 5/8
5 9/166 1/16
7811
13 1/815
17 9/16
6 1/28 1/4
1012 1/2
1517 1/220 1/2
23
56 5/87 1/8
10 5/813
15 1/417 3/420 1/4
3 5/85
6 3/168 1/2
10 5/812 3/4
1516 1/4
1/161/161/161/161/161/161/161/16
7/81 1/81 1/4
1 7/161 5/81 7/8
22 1/8
8- 5/88- 3/48- 3/4
12- 3/412- 7/8
16-116-1 1/820-1 1/8
33 1/23 3/44 1/44 3/45 1/45 3/4
6
3 1/24 1/44 1/2
55 1/26 1/46 3/4
7
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
110165220370540695
12251270
23468
101214
Catalog No. 105DS-Daniel 600 -Dual Seal23468
101214
2.0673.0684.0266.0657.981
10.02011.93813.125
5 1/46 15/166 9/16
7 15/168 5/8
99 13/1610 1/4
5 1/46 15/166 9/16
7 15/168 5/8
88 13/1410 1/4
10 5/814
13 1/416
17 1/217 1/418 7/820 3/4
12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8
4 1/45 3/86 1/8
789
10 3/411 7/8
3 3/44 1/85 3/8
78 1/4
1011
11 7/8
13 1/414 1/215 3/418 3/421 3/424 7/8
2831 5/8
5 9/166 1/16
7811
13 1/815
17 9/16
68 1/4
10 3/414
16 1/22022
23 3/4
56 5/88 1/211 1/213 3/4
1719 1/420 3/4
3.6255.0006.1888.500
10.62512.75015.00016.250
1/41/41/41/41/41/41/41/4
1 1/41 1/21 3/42 1/4
2 7/162 3/42 7/8
3
8- 5/88- 3/48- 7/812- 1
12-1 1/816-1 1/420-1 1/420-1 3/8
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
4 1/45
5 3/46 3/47 3/48 1/28 3/49 1/2
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
115175300480710920
14301735
23468
101214
Catalog No. 106TS-Daniel 900 -Teflon Seal
23468
101214
††††††††
6 15/166 15/167 13/168 9/169 1/16
10 13/1611 9/1611 1/16
6 15/166 15/167 1/167 15/169 1/16
10 13/1611 9/1611 1/6
141415
16 5/818 3/821 7/823 3/822 3/8
12 7/813 3/414 1/815 1/217 1/418 3/820 3/8
21
5 3/45 3/86 1/8
79 1/8
1112
12 3/8
4 1/44 3/45 3/47 1/29 1/4
10 3/412
12 3/16
13 3/414 1/215 3/418 3/421 3/424 7/8
2831 1/16
5 9/166 1/16
7811
13 1/815
17 9/16
8 1/29 1/211 1/2
1518 1/221 1/2
2425 1/4
6 1/27 1/29 1/4
12 1/215 1/218 1/2
2122
3.6255.0006.1888.500
10.62512.75015.00016.750
1/41/41/41/41/41/41/41/4
1 3/41 3/4
22 7/162 3/4
33 3/83 5/8
8- 7/88- 7/8
8-1 1/812-1 1/812-1 3/816-1 3/820-1 3/820-1 1/2
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
5 3/45 3/46 3/47 3/48 3/49 1/4
1011 1/4
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
230245355600
1265180022602495
23468
101214
† To be specified by purchaser.Sizes 12" and 14" up to Daniel 900 Contain "DVS" Seal Vulcanized to plate.
13
FLANGED - RING JOINT 2”-14” Daniel 600 & 900
A.P
.I. R
ing
Num
ber
Dia
m. I
nter
nal L
ine
Bor
e
Ups
tream
Fac
e of
Orif
ice
Pla
te to
Fac
e of
End
Dow
nstre
am F
ace
of O
rific
eP
late
to F
ace
of E
nd
Ove
rall
Face
to F
ace
Ope
ratin
g C
lear
ance
Fro
mC
ente
r
Bod
y C
lear
ance
Fro
m C
ente
r
Cen
terli
ng to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
r Pla
te C
hang
ine
Dia
met
er o
f Fla
nge
Dia
met
er o
f Bol
t Circ
le
Pitc
h D
iam
eter
of R
ing
and
Gro
ove
Dep
th o
f Gro
ove
Wid
th o
f Gro
ove
Flan
ge T
hick
ness
Num
ber a
nd D
iam
eter
of
Bol
t-Stu
ds (P
er F
lang
e)
Leng
th o
f Bol
t-Stu
ds w
ith 2
Hex
. Nut
s
Siz
e of
Dra
in P
lug
Orif
ice
Pla
te T
hick
ness
App
roxi
mat
e W
eigh
t(P
ound
s)
SIZE A B C D F G H I I1 J K L2 M1 M2 N1 P R SIZECatalog No. 145DS-Daniel 600 -Dual Seal
23468
101214
R-23R-31R-37R-45R-49R-53R-57R-61
2.0673.0684.0266.0657.981
10.02011.93813.125
5 5/167
6 5/88
8 11/169 9/169 7/8
10 5/16
5 5/167
6 5/88
8 11/168 1/168 7/8
10 5/16
10 3/414 1/813 3/816 1/817 5/817 3/8
1920 7/8
12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8
4 1/45 3/86 1/8
789
10 3/411 7/8
3 3/44 1/85 3/8
78 1/4
1011
11 7/8
13 1/414 1/215 3/418 3/421 3/424 7/8
2831 5/8
5 9/166 1/16
7911
13 1/815
17 9/16
6 1/28 1/4
10 3/414
16 1/22022
23 3/4
56 5/88 1/211 1/213 3/4
1719 1/420 3/4
3 1/44 7/85 7/8
8 5/1610 5/812 3/4
1516 1/2
5/165/165/165/165/165/165/165/16
15/3215/3215/3215/3215/3215/3215/3215/32
1 5/161 9/16
1 13/162 3/162 1/2
2 13/162 15/163 1/16
8- 5/88- 3/48- 7/812-1
12-1 1/816-1 1/412-1 1/420-1 3/8
4 1/25 1/4
678
8 3/49
9 3/4
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
115175300480710920
14301735
23468
101214
Catalog No. 146TS-Daniel 900 -Teflon Seal23468
101214
R-24R-31R-37R-45R-49R-53R-57R-62
††††††††
7 7
7 7/88 5/89 1/8
10 7/811 5/8
13
77
7 1/88
9 1/810 7/811 5/8
12 15/16
14 1/814 1/815 1/816 3/418 1/2
2223 1/226 1/8
12 7/813 3/414 1/815 1/217 1/418 3/820 3/8
21
5 3/45 3/86 1/8
79 1/8
1112 1/412 1/8
4 1/44 3/45 3/47 1/29 1/4
10 3/412
12 13/16
13 3/414 1/215 3/418 3/421 3/424 7/8
2831 /16
5 9/166 1/16
7911
13 1/815
17 9/16
8 1/29 1/211 1/2
1518 1/221 1/2
2425 1/4
6 1/27 1/29 1/4
12 1/215 1/218 1/2
2122
3 3/44 7/85 7/8
8 5/1610 5/812 3/4
1516 1/2
5/165/165/165/165/165/165/167/16
15/3215/3215/3215/3215/3215/3215/3215/32
1 13/161 13/162 1/162 1/2
2 13/163 1/163 7/163 13/16
8- 7/88- 7/8
8-1 1/812-1 1/812-1 3/816-1 3/820-1 3/820-1 1/2
66789
9 1/210 1/411 3/4
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
230245355600
1265180022602495
23468
101214
† To be specified by purchaser. Sizes 12" and 14" up to Daniel 900 Contain "DVS" Seal Vulcanized to plate.
14
FLANGED - RAISED FACE2”-12” Daniel 1500 & 2”- 6” Daniel 2500
Dia
m. I
nter
nal L
ine
Bor
e
Ups
tream
Fac
e of
Orif
ice
Pla
te to
Fac
eof
End
Dow
nstre
am F
ace
ofO
rific
e P
late
to F
ace
of E
nd
Ove
rall
Face
to F
ace
Ope
ratin
g C
lear
ance
From
Cen
ter
Bod
y C
lear
ance
Fro
mC
ente
r
Cen
terli
ne to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
r Pla
teC
hang
ing
Dia
met
er o
f Fla
nge
Dia
met
er o
f Bol
tC
ircle
Dia
met
er o
f Rai
sed
Face
+.0
00 -.
005
Hei
ght o
f Rai
sed
Face
Flan
ge T
hick
ness
Num
ber a
ndD
iam
eter
of B
olt-
Stud
s (P
er F
lang
e)
Leng
th o
f Bol
t-Stu
dsw
ith 2
Hex
. Nut
s
Siz
e of
Dra
in P
lugs
Orif
ice
Pla
teTh
ickn
ess
App
roxi
mat
e W
eigh
t(P
ound
s)
SIZE A B C D F G H I I1 J K L M N P R SIZECatalog No. 107-TS-Daniel 1500 -Teflon Seal
23468
1012
†††††††
6 15/168 3/168 3/8
10 3/411 23/3212 5/1613 5/16
6 15/167 11/167 7/8
10 3/1611 5/3212 5/1613 5/16
1416
16 3/821 1/1623 1/824 7/826 7/8
12 7/813 3/4
1516
17 1/418 3/820 1/4
5 3/45 5/86 1/27 3/49 3/4
1112 3/8
4 1/45 1/46 1/87 3/49 1/211 1/213 1/4
13 3/414 7/816 1/819 1/822 1/8
2628 1/4
5 9/166 1/16
7911
13 1/815
8 1/210 1/212 1/415 1/2
1923
26 1/2
6 1/28
9 1/212 1/215 1/2
1922 1/2
3.6255.0006.1888.500
10.62512.75015.000
1/41/41/41/41/41/41/4
1 3/42 1/82 3/83 1/23 7/84 1/25 1/8
8- 7/88-1 1/88-1 1/4
12-1 3/812-1 5/812-1 7/8
16- 2
5 3/47
7 3/410 1/411 1/213 1/214 3/4
1/21/23/43/43/43/43/4
1/81/81/81/81/41/41/4
230275520875
150021803470
23468
1012
Catalog No. 108-TS-Daniel 2500 -Teflon Seal
2346
††††
8 5/89 9/1610 1/212 1/2
8 5/89 9/1610 1/212 1/2
17 3/819 1/421 1/825 1/8
15 1/815 1/816 1/417 1/2
7 1/47 1/47 3/49 1/2
667
9 1/2
16 7/816 7/8
1719 1/8
77
7 3/89
9 1/4121419
6 3/49
10 3/414 1/2
3.6255.0006.1888.500
1/41/41/41/4
2 1/42 7/83 1/44 1/2
8- 18-1 1/48-1 1/2
8- 2
78 3/4
1013 /34
1/21/23/43/4
1/81/81/81/8
560660840
1520
2346
† To be specified by purchaser.
Technical GuideDAN-DIF-TG-11-1003October 2003
15
FLANGED - RING JOINT2”-12” Daniel 1500 & 2”- 6” Daniel 2500
A.P
.I. R
ing
Num
ber
Dia
m. I
nter
nal L
ine
Bor
e
Ups
tream
Fac
e of
Orif
ice
Pla
te to
Fac
e of
End
Dow
nstre
am F
ace
of O
rific
eP
late
to F
ace
of E
nd
Ove
rall
Face
to F
ace
Ope
ratin
g C
lear
ance
Fro
mC
ente
r
Bod
y C
lear
ance
Fro
mC
ente
r
Cen
terli
ne to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
r Pla
teC
hang
ing
Dia
met
er o
f Fla
nge
Dia
met
er o
f Bol
t Circ
le
Pitc
h D
iam
eter
of R
ing
and
Gro
ove
Dep
th o
f Gro
ove
Wid
th o
f Gro
ove
Flan
ge T
hick
ness
Num
ber a
nd D
iam
eter
of
Bol
t-Stu
ds (P
er F
lang
e)
Leng
th o
f Bol
t-Stu
ds w
ith 2
Hex
. Nut
s
Siz
e of
Dra
in P
lugs
Orif
ice
Pla
te T
hick
ness
App
roxi
mat
e W
eigh
t(P
ound
s)
SIZE A B C D F G H I I1 J K L2 M1 M2 N1 P R SIZECatalog No. 148-TS-Daniel 2500 -Teflon Seal
23468
1012
R-24R-35R-39R-46R-50R-54R-58
†††††††
78 1/4
8 7/1610 7/8
11 29/3212 1/213 5/8
77 3/4
7 15/1610 5/1611 11/3212 1/213 5/8
14 1/816 1/816 1/2
21 9/1623 1/225 1/427 1/2
12 7/813 3/4
1516 1/817 1/418 3/820 1/4
5 3/45 5/86 1/27 3/49 3/4
1112 3/8
4 1/45 1/46 1/87 3/49 1/211 1/213 1/4
13 3/414 7/816 1/819 1/822 1/8
2627 13/16
5 9/166 1/16
7911
13 1/815
8 1/210 1/212 1/415 1/2
1923
26 1/2
6 1/28
9 1/212 1/215 1/2
1922 1/2
3 3/45 3/86 3/8
8 5/1610 5/812 3/4
15
5/165/165/163/8
7/167/169/16
15/3215/3215/3217/3221/3221/3229/32
1 3/162 3/162 7/163 5/8
4 1/164 11/165 7/16
8- 7/88-1 1/88-1 1/4
12-1 3/812-1 5/812-1 7/8
16- 2
67 1/4
810 1/2
1213 3/415 1/4
1/21/23/43/43/43/43/4
1/81/81/81/81/41/41/4
230325520875
150021803470
23468
1012
Catalog No. 148-TS-Daniel 2500 -Teflon Seal2346
R-26R-32R-38R-47
††††
8 11/169 11/16
10 11/1612 3/4
8 11/169 11/16
10 11/1612 3/4
17 1/219 1/221 1/225 5/8
15 1/815 1/816 1/417 1/2
7 1/47 1/47 3/49 1/2
667
9 1/2
16 7/816 7/8
1719 1/8
77
7 3/89
9 1/4121419
6 3/49
10 3/414 1/2
45
6 3/169
5/163/8
7/161/2
15/3217/3221/3225/32
2 5/163
3 7/164 3/4
8- 18-1 1/48-1 1/2
8- 2
7 1/49
10 1/214 1/4
1/21/23/43/4
1/81/81/81/8
560660840
1520
2346
† To be specified by purchaser.
Technical GuideDAN-DIF-TG-11-1003October 2003
16
WELDNEKTM
2”-14” Daniel 600 & 900
Dia
m. I
nter
nal
Line
Bor
e
Ups
tream
Fac
e of
Orif
ice
Pla
te to
Face
of E
nd
Dow
nstre
am F
ace
of O
rific
e P
late
toFa
ce o
f End
Ove
rall
Face
toFa
ce
Ope
ratin
gC
lear
ance
Fro
mC
ente
r
Bod
y C
lear
ance
From
Cen
ter
Cen
terli
ne to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
rP
late
Cha
ngin
g
Dia
met
er o
f Hub
at P
oint
of
Wel
ding
Siz
e of
Dra
inP
lugs
Orif
ice
Pla
teTh
ickn
ess
App
roxi
mat
eW
eigh
t (P
ound
s)
SIZE A B C D F G H I I1 O P R SIZE
Catalog No. 185DS-Daniel 600 -Dual Seal
23468
101214
2.0673.0684.0266.0657.981
10.02011.93813.125
5 1/46 15/167 3/16
7 15/168 5/8
99 4/5
10 1/4
5 1/46 15/167 3/16
7 15/168 5/8
88 13/1610 1/4
10 5/814
14 1/216
17 1/217 1/418 7/820 3/4
12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8
4 1/45 5/86 1/8
789
10 3/811 7/8
3 3/44 1/85 3/8
78 1/4
1011
11 7/8
13 1/414 1/21 3/4
18 3/421 3/424 7/8
2831 5/8
5 9/166 1/16
7911
13 1/815
17 9/16
2.3753.5004.5006.6258.625
10.75012.75014.000
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
95145230320480570
10001215
23468
101214
Catalog No. 186TS-Daniel 900 -Teflon Seal
23468
101214
††††††††
6 15/166 15/167 13/168 9/169 1/16
10 13/1611 9/1611 1/16
6 15/166 15/167 1/16
7 13/169 1/16
10 13/1611 9/1611 1/16
141415
16 5/818 3/821 7/823 3/822 3/8
12 7/813 3/414 1/815 1/217 1/418 3/820 3/8
21
5 3/45 3/86 1/8
79 1/8
1112 1/412 3/8
4 1/44 3/45 3/47 1/29 1/4
10 3/412
12 13/16
13 3/414 1/215 3/418 3/421 3/424 7/8
2831 11/16
5 9/166 1/16
7911
13 1/815
17 9/16
2.3753.5004.5006.6258.625
10.75012.75014.000
1/21/23/43/43/43/43/43/4
1/81/81/81/81/41/41/41/4
180185245380925
131016101735
23468
101214
† To be specified by purchaser.Sizes 12" and 14" up to Daniel 900 contain "DVS" Seal Vulcanized to plate.
Technical GuideDAN-DIF-TG-11-1003October 2003
17
WELDNEKTM
2”-12” Daniel 1500 & 2”- 6” Daniel 2500
Dia
m. I
nter
nal L
ine
Bor
e
Ups
tream
Fac
e of
Orif
ice
Pla
te to
Fac
e of
End
Dow
nstre
am F
ace
of O
rific
eP
late
to F
ace
of E
nd
Ove
rall
Face
to F
ace
Ope
ratin
g C
lear
ance
Fro
mC
ente
r
Bod
y C
lear
ance
Fro
m C
ente
r
Cen
terli
ne to
Bot
tom
Cen
terli
ne to
Top
Cle
aran
ce fo
r Pla
te C
hang
ing
Dia
met
er o
f Hub
at P
oint
of
Wel
ding
Siz
e of
Dra
in P
lugs
Orif
ice
Pla
te T
hick
ness
App
roxi
mat
e W
eigh
t(P
ound
s)
SIZE A B C D F G H I I1 O P R SIZE
Catalog No. 187-TS-Daniel 1500 -Teflon Seal
23468
1012
†††††††
6 15/168 3/168 3/8
10 3/411 23/3212 5/1613 5/16
6 15/167 11/167 7/8
10 3/1611 5/3212 5/1613 5/16
1416
16 3/821 1/1623 1/824 7/826 7/8
12 7/813 3/4
1516
17 1/418 3/820 1/4
5 3/45 5/86 1/27 3/49 3/4
1112 3/8
4 1/45 1/46 1/87 3/49 1/211 1/213 1/4
13 3/414 7/816 1/819 1/822 1/8
2628 1/4
5 9/166 1/16
7911
13 1/815
2.3753.5004.5006.6258.625
10.75012.750
1/21/23/43/43/43/43/4
1/81/81/81/81/41/41/4
180225370545980
13102140
23468
1012
Catalog No. 188-TS-Daniel 2500 -Teflon Seal
2346
††††
8 5/89 9/1610 1/212 1/2
8 5/89 9/1610 1/212 1/2
17 3/819 1/421 1/825 1/8
15 1/815 1/216 1/417 1/2
7 1/47 1/47 3/49 1/2
667
9 1/2
17 7/816 7/8
1719 1/8
77
7 3/89
2.3753.5004.5006.625
1/21/23/43/4
1/81/81/81/8
480490590870
2346
† To be specified by purchaser.
Technical GuideDAN-DIF-TG-11-1003October 2003
18
Orifice Plate Sealing Units
The Daniel Dual Seal is the most simple and practical orifice plate sealing device for normal flowing streams. It is precision molded from 70-80 shore nitrile synthetic rubber** and provides four rubber-to-metal sealing surfaces 360º around the plate.The units positively seal against both outer faces of the plate and against both seatsof the orifice fitting to prevent leakage. In 1-1/2" to 10" sizes, the "DSC" is interchangeable with Daniel "TSC" and "MSC" seal units. In 12" sizes and up, theseal is bonded from 80-90 shore rubber directly to the outer edge of the orifice plateat the factory. If damaged, the "DVSC" seal and plate may be returned to the factoryfor revulcanizing. The "DSC" and "DVSC" seals are used in Daniel fittings sizes up toDaniel 600, in temperatures from -20ºF to +275ºF.
*US Patent # 5085250. **Also available in Viton.
The Daniel Snap Seal Ring is a removable orifice plate holder designed for use inservices where elastomer seal swelling is a problem. Certain media, such as ethylene or carbon dioxide may cause seal swelling when other type seal units areremoved from high-pressure service. The Snap Seal Ring unit consists of two symmetrical metal rings, each one having an O-ring on both sides for a positive sealon the plate side and the fitting side of the ring. These rings center and secure theorifice plate between them. The assembled unit provides a full 360º rubber-to-metalseal around both sides, even in the absence of any pressure differential. No specialtools are required for assembly or disassembly. The Snap Seal Ring is designed forservice temperatures ranging from -20ºF to +275ºF (standard O-rings) to -67ºF to+437ºF (Viton O-rings). It is available for line sizes of 2" through 16". When ordering,please specify nominal line size, schedule, plate thickness, and flowing media ormaterial choice. The unit is available in 316 stainless steel and cadmium-plated carbon steel.
*US Patent # 4,478,251.
“DSC” DUAL SEAL*
"DSC" in 2"-8", "DS" in 10"
“SSR” SNAP SEAL RING*
"SSRC" 2"-8", "SSR" 10" and up
Technical GuideDAN-DIF-TG-11-1003October 2003
19
“TSC” TEFLON SEAL
"TSC" 2"-8", "TS" 10"and up
“MSC” METAL SEAL
"MSC" 2"-8", "MS" 10" and up
The Daniel Teflon Seal is a superior orifice plate sealing unit for difficult, corrosiveflows and for higher temperatures than the "DSC" unit can handle. The "TSC" hasproven effective in such flows as dilute sulphuric acid, fuming nitric acid, hydrazine,liquid oxygen and other unusual flows, from -65ºF to +500ºF. The two-piece unit consists of an inlet ring which fits around the plate outer diameter, and a downstreamring fitted with metal clips for assembling the unit. A special lip on this ring plus anannular groove* provide compression to effectively seal off the plate. The "TSC" unitcan be assembled or taken apart by hand and is interchangeable in 1 1/2" to 10"sizes with Daniel "DSC" and "MSC" seal units. The Teflon seal is recommended forservices with Daniel 900, 1500, 2500 fittings or lower pressure services where rubberseals may not be satisfactory. Size 14" and larger now have graphite added for lubricity and ease of movement.
*This groove should be spread by inserting a blunt object such as screw driver and rotating 360º to reengage the spring lip after each use.
The Daniel Metal Seal is a stainless or cadmium-plated carbon steel clip-ring assembly recommended for high pressures and for temperatures up to 1200ºF. Theassembly consists of an upstream and a downstream ring. The upstream ring has arecessed groove into which a thin leaf-spring is inserted. When the plate is clampedbetween the rings, the spring provides the necessary compression to seat the plateagainst the downstream ring and effect a seal. "MSC" Seal Units of cadmium-platedcarbon steel are recommended for services to +600ºF, standard 316 stainless steelunits to +1000ºF, and 316 stainless steel units with an iconel spring to +1200ºF. The"MSC" seal unit can be assembled or taken apart by hand and is interchangeable in1-1/2" to 12" sizes with Daniel "DSC" and "TSC" seal units.
Technical GuideDAN-DIF-TG-11-1003October 2003
©2003 Daniel Measurement and Control, Inc., all rights reserved. Printed in USA , DAN-DIF-TG-11-1003
Daniel Division HeadquartersHouston, Texas, USA, Calgary, Alberta, Canada, Singapore - Asia Pacific, T: 713-467-6000, F: 713-827-3880 T: 403-279-1879, F: 403-236-1337 T: +65-6777-8211, F: +65-6770-8001
Stirling, Scotland - UK, Mid-East, Africa, USA Toll Free 1-888-FLOW-001 www.daniel.comT: +44 01786 433400, F: +44 01786 433401
Daniel is a wholly owned subsidiary of Emerson Electric Co., and a division of Emerson Process Management. The Daniel logo is a registered trademark of DanielIndustries, Inc. The Emerson logo is a registered trademark and service mark of Emerson Electric Co. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express orimplied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications ofsuch products at any time. Daniel does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use andmaintenance of any Daniel product remains solely with the purchaser and end-user.
Technical GuideDAN-DIF-TG-11-1003October 2003