BROOKFIELD AMETEK PROCESS VISCOMETERS AST-102FTSY Viscometer
2
BROOKFIELD AMETEK PROCESS VISCOMETERS AST-102FTSY ™ Viscometer in-line viscosity control for increased production at lower costs No moving parts to wear, bind or contact process materials No narrow gaps to trap product Simple clean-in-place design complies with 3A standard Rugged 316L stainless steel construction Continuous, reliable 4-20 mA, RS232 or RS485 output Model AST-330SY ™ Viscosity Controller (optional) PLC based single station controller allows operator interface and modification. Various screen options include active bar graph and time adjustable trend history graphs. Compliant to 3A sanitary standards TEL 800-628-8139 or 508-946-6200 FAX 508-946-6262 www.brookfieldengineering.com (ES) Equipements Scientifiques SA - Département Bio-tests & Industries - 127 rue de Buzenval BP 26 - 92380 Garches Tél. 01 47 95 99 90 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com
Transcript of BROOKFIELD AMETEK PROCESS VISCOMETERS AST-102FTSY Viscometer
BROOKFIELD AMETEK PROCESS VISCOMETERS
AST-102FTSY™ Viscometerin-line viscosity control for increased production at lower costs
No moving parts to wear, bind or contact process materials
No narrow gaps to trap product
Simple clean-in-place design complies with 3A standard
Rugged 316L stainless steel construction
Continuous, reliable 4-20 mA, RS232 orRS485 output
Model AST-330SY™ Viscosity Controller (optional)
PLC based single station controller allows operator interface and modification. Various screen options include active bar graph and time adjustable trend history graphs.
Compliant to 3A sanitary standards
TEL 800-628-8139 or 508-946-6200 FAX 508-946-6262 www.brookfieldengineering.com(ES) Equipements Scientifiques SA - Département Bio-tests & Industries - 127 rue de Buzenval BP 26 - 92380 GarchesTél. 01 47 95 99 90 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com
The Model AST-102FTSY fully complies with 3A sanitary standards and has FDA approved components for contact with food. While ideal for food and dairy applications, it can also be used in applications that require improved cleanability.
L05-730-D0516
5"
12"
SIGNAL/TEMP OUTPUT CABLE TO CONTROLLER
ELECTRONICS BOX
2” TRI-CLAMPOUTLET
2-½” TRI-CLAMPINLET
AST-102FTSY Viscosity Sensor Specifications
Measurement Type: Torsionally oscillating probe
Measurement Range: 1 to 3,000 (optional 12,000) cSt using an NIST traceable, Newtonian fluid measured at 25°C
Process Connections: 2½” tri-clamp 3-A design inlet, 2” tri-clamp outlet
Repeatability: ± 1.0% of reading
Wetted Surfaces: 316L stainless steel
Sensor O-Ring: Kalrez for probe, Teflon for chamber housing; both seals are FDA compliant
Temperature (fluid): -20° to 200°C (-4° to 392°F)
Pressure: Up to 200 psi (13.6 bar)
AST-102FTSY Transmitter Specifications
Viscosity Ranges (cSt) (field selectable):
0 to 10 • 0 to 50 • 0 to 100 • 0 to 250 • 0 to 500 • 0 to 1,000 • 0 to 1,500 • 0 to 2,000 • 0 to 3,300 • 0 to 12,000
Maximum Resolution: Analog: ± 0.05% of full scale Digital: ± 0.01 cSt
Analog Output (2): 4—20 mA (non-isolated) CH1 = viscosity CH2 = temperature
Serial Port (2): Port 1 = RS232, simplex, read only, Port 2 = ½ Duplex RS485, Modbus RTU driver
Electronics Packaging: Wall mount, NEMA-4 (IP65), 8” x 8” x 6” (203 x 203 x 152mm)
Ambient Temp Range: 0 to 40°C (32 to 104°F)
Electrical Area Rating: NEMA-4
Interconnecting Cable: 25 ft (7.6m) standard: 50 ft (15.2m) and 75 ft (22.8m) optional
Supply Voltage: 115 VAC, 230 VAC or 24 VDC
AST-102FTSY Diagram
ISO 9001:2008 CERTIFIED
(ES) Equipements Scientifiques SA - Département Bio-tests & Industries - 127 rue de Buzenval BP 26 - 92380 GarchesTél. 01 47 95 99 90 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com
