1

Brook Bottom Load Water Dispenser User and Care Manual

Model No.: SOBK210EBL SOBK210MBL

Please read the manual carefully before operating your water dispenser. Retain it for future reference.

2

SAFETY PRECAUTIONS To reduce risk of injury and property damage, user must read this entire guide before assembling, installing & operating dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage. This product dispenses water at above 176℉ . Failure to use properly can cause personal injury. When operating this dispenser, always exercise basic safety precautions, including the following: l Prior to use, this dispenser must be properly assembled and installed in

accordance with this manual. l This dispenser is intended for water dispensing only. Do NOT use other

liquids. Do NOT use for other purposes. Never use any other liquid in the dispenser other than known and microbiologically safe bottled water.

l This appliance is intended for use by adults. Direct adult supervision should be maintained if this appliance is used by a child.

l For indoor use only. Keep water dispenser in a dry place away from direct sunlight. Do NOT use outdoors.

l Install and use only on a hard, flat, and level surface that is substantial enough to support the weight of the water cooler and the water coolers contents.

l Do NOT place dispenser in an enclosed space or cabinet. l Do NOT operate dispenser in the presence of explosive fumes. Do not

store flammable or explosive substances such as aerosol cans with a flammable propellant in or near this appliance.

l Use only properly grounded outlets .Do not use an extension cord with your water dispenser.

l Always grasp plug and pull straight out from outlet. Never unplug by pulling on the power cord.

3

l Do NOT use dispenser if cord becomes frayed or otherwise damaged. l To protect against electric shock, do NOT immerse cord, plug, or any other

part of dispenser in water or other liquids. l Ensure dispenser is unplugged prior to cleaning. l Service should be performed only by a certified technician. l Never turn the machine upside down or lean it more than 45 degree. l The machine should not be turned on until at least 3 minutes after turning

off the power switch Warning: Do not strike, bend or otherwise damage the exposed refrigerant coils on the rear of the cooler. This can cause failure of the refrigeration system.

PARTS NAME

3

4

1

5

6

7

8

11

10

10

2

9

4

No. Parts Name No. Parts Name

1 Hot water push button with

safety lock (only available for SOBK210MBL)

8 Dip tube

2 Cold water push button (only available for SOBK210MBL)

9 Bottle lock handle

3 LED display 10 Drain valve 4 Nozzle 11 Hot switch 5 Lower door 6 Drip tray 7 Lower door latch

OPERATION INTERFACE

5

l Dispense hot water: touch safety lock icon until a beep is heard, then release the safety lock icon and touch the hot water icon within 3 seconds (model # SOBK210EBL), or ( for model # SOBK210EBL) unlock safety lock, then depress hot water push button to dispense hot water. Note: Not following hot water start up instructions, located on page 6 of this manual, will cause serious damage to this appliance.

l Dispense cold water: touch safety lock icon until a beep is heard, then release the safety lock icon and touch the cold water icon within 3 seconds (model no.: SOBK210EBL), or depress cold water push button to dispense cold water (model no.: SOBK210EBL).

l Set hot temperature: touch and hold SET icon about 5 seconds till the hot temperature icon flashes, release the SET icon, then touch the Empty icon. The hot temperature will flash from 176℉,185℉ to 194℉. Each number will flash for about 2 seconds. Release the LEAKING icon when your desired temperature appears.

l Set cold temperature: touch and hold the SET icon about 5 seconds until the cold temperature icon flashes. Release the SET icon, then touch the Empty icon. The cold temperature will be flash from 52℉,46℉ to 41℉. Each number will flash for about 2 seconds. Release the Empty icon when your desired temperature appears.

l Set clock: touch and hold the SET icon until the hour icon flashes. Release the SET icon, then touch the Empty icon. The hour digits will scroll until the icon is released when the desired hour is displayed. Repeat this step for the minutes. The cooler will automatically return to standard display after 10 seconds without input.

l Night light: The night light can be turned off or on by touching the light icon. l Energy Save: Touch LIGHT icon for about 2 seconds, then touch LIGHT

icon again for about 10 seconds till three bee are heard, all icons turn off for energy save. Touch LIGHT icon again for about 2 seconds, then touch LIGHT icon for about 10 seconds till three bee are heard, all icons turn on, the cooler returns to standard display.

6

l Empty: the cooler is designed with a built in empty detector. If bottle empty detected, the empty icon will flash, the pumps, cooling, heating and dispensing icons will be disabled until the full water bottle replaced. After replaced a full water bottle, touch the empty icon for about 3 seconds, the cooler returns to standard working condition.

START UP

1. Install drip tray below faucet.

2. Take a full water bottle, put drip tube into the full water bottle (dip tube can punch in the non-spill cap without peel it off).

3. Turn the bottle lock handle all

the way to the left to lock the

bottle. See diagram on

the right.

4. Connect cooler to a 120 volt electrical outlet.

5. Touch light icon to turn on all lights on the LED display.

6. Depress safety lock and hot faucet push button (model no.: SOBK210MBL) or touch safety and hot water icon (SOBK210EBL) until water flow is continuous and clear.

7. Power on hot switch located at the back of the cooler top left side.

l Turn ‘ON’ the switch after installation is complete for hot water.

l - Turn ‘OFF’ the switch if hot water is not required.

7. To set various water temperature following instructions on page 5.

8. To set the time following instructions on page 5.

CAUTION: Hot tank must be filled with water before turning on hot switch. To prevent injury children should not operate this appliance without direct adult supervision.

7

CLEANING

To avoid accidents, unplug the appliance from the power supply before cleaning. ALL PLASTIC PARTS ARE DISHWASHER SAFE. Bottle ring, drip tray and cabinet can be cleaned with most mild on-abrasive household cleaners. To prevent damage to plastic parts, avoid abrasive cleaning aids such as steel wool etc.

MAINTENANCE

l Condenser: To ensure optimum cooler performance, condenser must be maintained free of dust and lint. Condenser must be regularly inspected and cleaned with soft brush.

l Drip Tray: The drip tray should be emptied and cleaned regularly. To remove, pull tray straightforward from the cabinet.

l Storage / Return Shipment: If the cooler is removed from service, the water must be completely drained from the system using the drain located on the back of the cooler. Caution: allow cooler to set, unplugged, for at least 5 hours prior to draining. This will allow the hot water to cooler and prevent injury.

8

LIMITED WARRANTY TERMS AND CONDITIONS – This warranty is “limited” to a dispenser installed in non-restricted locations, such as residences or offices. This warranty does not provide any allowances for labor reimbursement. This limited warranty does not offer coverage for components that are not factory installed such as dealer installed accessories not originally sold by this manufacturer. If paint or other appearance imperfections are noted at time of installation, the owner must advise the installer or the supplier without delay.

INSTALLATION AND OPERATION – The foregoing Limited Warranty applies only when the dispenser is installed and operated in accordance with the Manufacturer’s written instructions included with each unit. It does not apply to dispensers, which on examination by the Manufacturer or his agent, are found to have been subjected to accident, modifications, abuse, misuse, misapplications, corrosive type atmospheres, or abnormal use.

Warranty-The Manufacturer warrants the complete water dispenser including compressor, hermetically sealed refrigeration system, water system faucets, and electrical components to be free from defects in material and workmanship under normal use for twenty four (24) months from Invoice date.

OWNER’S OBLIGATIONS – Owner to provide proof of installation date when repair is required. The owner has the obligation and responsibility to diagnose and/or make minor adjustments and to reimburse the authorized service center or the Manufacturer for any other repair not covered by the terms of this Limited Warranty. The owner also has the obligation and responsibility to return the complete unit to the owners place of business, closest authorized distributor, service center or to the factory repair department if the compressor, refrigeration or water system is found to be defective during the warranty period.

9

MANUFACTURER’S OBLIGATIONS – The Manufacturer warrants the complete water dispenser including compressor, hermetically sealed refrigeration system, water system faucets, and electrical components to be free from defects in material under normal use for 2 years from date of installation or twenty - seven months from date of shipment from Manufacturer, whichever occurs first. Coverage is limited to replacing a defective cooler with a similar cooler, crediting the customer the amount paid for the defective cooler, reimbursing the customer the amount paid for the defective cooler, or providing parts to repair or replace any part of the water dispenser which is expressly covered by this Limited Warranty at the manufacturer’s option. In any case, the value of the Warranty shall not exceed the original purchase price paid for the water dispenser. PERSONS ENTITLED TO BENEFIT WARRANTY – This Limited Warranty is applicable only to (i) purchasers who purchase the water dispenser for resale in the ordinary course of business, and (ii) the first person who purchases the water dispenser other than for resale.

THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ALL IMPLIED WARRANTIES, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE SAME PERIOD OF TIME AS THIS LIMITED WARRANTY. Some states of the United States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply.

This Limited Warranty gives specific legal rights, and in some states of the United States there may also be other rights, which vary from state to state.

10

EXCEPT AS OTHERWISE EXPRESSLY PROVIDED ABOVE, THE MANUFACTURER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO ANY PERSON.