bron_prehled
-
Upload
ivanfeitosa -
Category
Documents
-
view
57 -
download
1
Transcript of bron_prehled
Broncolor - products
Products
Power packs
Monoblocs
Light
Remote control
Meters
Stands
Various
Continuous light
Typical equipment
Power packs
● Grafit● Topas ● Mobil● Primo
Monoblocs
● Minipuls C ● Minipuls D● Minipuls Kits
Basic lamp bases
● Mobilite ● Picolite ● Primo● Pulso F2/F4 ● Pulso Twin
Special lamp bases
● Fibrolite● Following spot "Profil 11/26"● Pulso Spot 4● Ringflash
Area lights
● Balloon● Boxlite 40 ● Cumulite 2● Hazylight 2● Hazylight Soft● Lightbar 60/120● Megaflex● Megalite● Mini-Cumulite● Mini-Hazylight● Pulsoflex C/EM● Satellite Staro ● Striplite 60/120
Reflectors and attachments
● Conical snoot● Flooter S● Fresnel spot attachment● Fresnel spot attachment to Picolite and Mobilite ● Optical Snoot to Pulso Spot 4● Projection attachment to Picolite● P 45 ● P 50 ● P 65 ● P 70 ● P 120 ● P-Soft ● P-Travel
http://www.bron.ch/products/frame.htm (1 van 3) [26-11-2001 08:38:05]
Broncolor - products
● Umbrella ● Satellite evolution ● Spot attachment ● Sunlite Set
Remote control
● Infrared transmitter IRQ ● Infrared transmitter IRX 2 ● Remote control Servor 3● Remote control Servor d
Measuring instruments
● Colormeter FCC● Flashmeter FCM 2
Stands
● broncolor pillar stand 215● Compuls AC● Flamingo● Hazylight● Junior AC ● Mini Flamingo● Senior AC ● Stand adapters ● Super-boom ● Twin articulated arm
Various
● Ceiling rail system
http://www.bron.ch/products/frame.htm (2 van 3) [26-11-2001 08:38:05]
Broncolor - products
Continuous light
● HMI 575, ballast unit ● HMI 1200, ballast unit ● HMI F575, lamp base ● HMI F1200, lamp base
Continuous light accessories
● Area lights to HMI F575 ● Folding refl. to HMI F575 ● Folding refl. to HMI F1200 ● Reflectors to HMI F575 ● Various acces. to HMI F575 ● Various acces. to HMI F1200
http://www.bron.ch/products/frame.htm (3 van 3) [26-11-2001 08:38:05]
Power packs
Grafit
Grafit A2Grafit A4Grafit A2 plusGrafit A4 plus
Topas
Topas A2Topas A4Topas A8
Mobil
MobilMobil Travel Kitbroncolor Studio Booster
Primo
Primo Primo bi Primo A fashionPrimo 4Primo 4 bi
http://www.bron.ch/products/power_packs.htm [26-11-2001 08:38:20]
Grafit A2
Grafit A2 Article no. 31.166.XX
Product summaryEasy to use illuminated front panel + 6.7 f-stop power variation + 3 independent outlets + colour temperature control + selectable flash duration t 0.1 up to 1/6000s + charging in 0.03 to 1.3s (230V) + IR triggering and remote control + fully controllable from Mac or PC + high-end pack
Product descriptionMicroprocessor controlled power pack (1600 J) with 3 lamp base connections, stabilized colour temperature on 2 main connections, variable output distribution (asymmetrical/symmetrical), 6.7 f-stops for main connections, 4 f-stops for reserve connection, in 1/10 or 1/3 f-stop intervals, display simultaneously in joules and f-stops, joules switchable to percentage, fully illuminated control panel and LCD-display, flash duration selectable on main connections, short-time exposure selectable, CTC (Colour Temperature Control) for uniform or deliberately variable colour temperature with broncolor FCC (Flash Colour Chronoscope), proportional modelling light over entire output range, additional functions: Flash sequences, triggering delay, selectable flash duration, slow charging, ping-pong release, stroboscopic effects with one or more power packs, choice of two infrared channels; etc., easy to use menu operated functions, menu text available in multiple languages (German, English, French, Spanish, Japanese, Swedish, Indonesian.)
Scope of deliveryPower pack with power cable 5 m, operating instructions.
Technical data
Flash energy 1600 J
F-stop at distanceof 2 m (6 1/2 ft.),100 ISO, reflector P70
64 2/10
http://www.bron.ch/products/31_166_xx.htm (1 van 3) [26-11-2001 08:38:27]
Grafit A2
Flash duration t 0.1 (t 0.5) 1/150 - 1/6000 s(1/450 - 1/10000 s)Flash duration and energy automatically regulated for optimum colour temperature. Flash duration can be preselected.
Charging time(for 100% of selected energy)
Version 1 (230 V): 0.03 - 1.3 sVersion 2 (120 V): 0.03 - 1.6 sVersion 3 (100 V): 0.03 - 2.2 sCan be switched to slow charging mode for low-amperage power outlets
Ready display Visual and audible (can be switched off); signals when 100 % of selected energy is reached
Lamp base outlets 2 main connections with flash cut-off and 1 reserve connection
Power output distribution Symmetrical and variable asymmetrical
Controls Illuminated silicone keyboard, resistant to dust and scratches. Wireless remote control with infrared Servor e.
Control range 6 7/10 f-stops for main connections, 4 f-stops for reserve connection, in 1/10 or 1/3 f-stop intervalsDisplay simultaneously in joules and f-stops, joules switchable to percentage
Colour temperature CTC (Colour Temperature Control) for uniform or deliberately variable colour temperature with broncolor FCC (Flash Colour Chronoscope)
Modelling light Halogen, max. 3 x 650 W at 200 - 240 VHalogen, max. 3 x 300 W at 100 - 120 VProportional to flash energy and «full» and «low» settings. Proportionality adjustable to other broncolor power packs and their various output ranges
Additional functions Flash sequences, triggering delay, selectable flash duration, slow charging, ping-pong release, stroboscopic effects with one or more power packs, a choice of two infrared channels; etc.Easy to use menu operated functions. Menu text available in multiple languages (German, English, French, etc.)
Flash release Manual release button, sync cable, selectable photocell or wireless via selectable IR-receiver
Sync sockets 2 pieces
Stabilized flash voltage +/- 0.5%
Standards EC standard 73/23, UL 122
Power requirements Version 1: 220-240 V / 50 Hz, switchable to 120 V / 60 Hz, current consumption 10A, longer series with shorter charging times 16A.Version 2: 110-120 V / 60 Hz, switchable to 230 V / 50 Hz, current consumption 15A.Version 3: 100 V / 50 Hz, switchable to 230 V / 50 Hz, current consumption 15A.
Dimensions 288 x 180 x 311.5 mm
Weight 8 kg
http://www.bron.ch/products/31_166_xx.htm (2 van 3) [26-11-2001 08:38:27]
Grafit A2
Compatibility
Power packs Grafit A2 plus, A4 plus, A4, 2, 4, Pulso 2, 4, A2, A4, 8, Opus 2, A2, 4, A4, A8, Primo, Primo A, Primo A fashion, Primo 4
Compact units Compuls 65, 95, 165, Minipuls C40, C80, C200
Lamp bases Pulso 2, F2, 4, F4, 8*, Twin, Primo, Universal lamp base, with RT plug
Remote control Servor e, Servor 3, Servor 2 (without additional functions)
Remote release IRI, FM (range approx. 7 m)IRQ, FCM 2, FCC, IRS (range approx. 10 m)IRX 2, IRX, IRS-E (range approx. 30 m)
* on reserve connection only
Special features
Automatic colour temperature control, called CTC. The auxiliary functions may be used for example for:
- alternating release to reduce flash sequence times using two power packs (ping-pong mode)
- fast strobo sequences (can be used as quasi-continuous light to asses precisely shadow edges etc.)
http://www.bron.ch/products/31_166_xx.htm (3 van 3) [26-11-2001 08:38:27]
Grafit A4
Grafit A4 Article no. 31.176.XX
Product summaryEasy to use illuminated front panel + 6.7 f-stop power variation + 3 independent outlets + colour temperature control + selectable flash duration t 0.1 up to 1/6000s + charging in 0.03 to 1.3s (230V) + IR triggering and remote control + fully controllable from Mac or PC + high-end pack
Product descriptionMicroprocessor controlled power pack (3200 J) with 3 lamp base connections, stabilized colour temperature on 2 main connections, variable output distribution (asymmetrical/symmetrical), 6.7 f-stops for main connections, 4 f-stops for reserve connection, in 1/10 or 1/3 f-stop intervals, display simultaneously in joules and f-stops, joules switchable to percentage, fully illuminated control panel and LCD-display, flash duration selectable on main connections, short-time exposure selectable, CTC (Colour Temperature Control) for uniform or deliberately variable colour temperature with broncolor FCC (Flash Colour Chronoscope), proportional modelling light over entire output range, additional functions: Flash sequences, triggering delay, selectable flash duration, slow charging, ping-pong release, stroboscopic effects with one or more power packs, choice of two infrared channels; etc., easy to use menu operated functions, menu text available in multiple languages (German, English, French, Spanish, Japanese, Swedish, Indonesian.)
Scope of deliveryPower pack with power cable 5 m, operating instructions.
Technical data
Flash energy 3200 J
http://www.bron.ch/products/31_176_xx.htm (1 van 3) [26-11-2001 08:38:33]
Grafit A4
F-stop at distance of 2 m (6 1/2 ft.),100 ISO, reflector P70
90 2/10
Flash duration t 0.1 (t 0.5)
1/180 - 1/6000 s(1/240 - 1/10000 s)Flash duration and energy automatically regulated for optimum colour temperature. Flash duration can be preselected.
Charging time(for 100% of selected energy)
Version 1 (230 V): 0.04 - 2.6 sVersion 2 (120 V): 0.04 - 2.6 sVersion 3 (100 V): 0.04 - 4.4 sCan be switched to slow charging mode for low-amperage power outlets
Ready display Visual and audible (can be switched off); signals when 100 % of selected energy is reached
Lamp base outlets 2 main connections with flash cut-off and 1 reserve connection
Power output distribution
Symmetrical and variable asymmetrical
Controls Illuminated silicone keyboard, resistant to dust and scratches. Wireless remote control with infrared Servor e.
Control range 6 7/10 f-stops for main connections, 4 f-stops for reserve connection, in 1/10 or 1/3 f-stop intervalsDisplay simultaneously in joules and f-stops, joules switchable to percentage
Colour temperature CTC (Colour Temperature Control) for uniform or deliberately variable colour temperature with broncolor FCC (Flash Colour Chronoscope)
Modelling light Halogen, max. 3 x 650 W at 200 - 240 VHalogen, max. 3 x 300 W at 100 - 120 VProportional to flash energy and «full» and «low» settings. Proportionality adjustable to other broncolor power packs and their various output ranges
Additional functions Flash sequences, triggering delay, selectable flash duration, slow charging, ping-pong release, stroboscopic effects with one or more power packs, a choice of two infrared channels; etc.Easy to use menu operated functions. Menu text available in multiple languages (German, English, French, etc.)
Flash release Manual release button, sync cable, selectable photocell or wireless via selectable IR-receiver
Sync sockets 2 pieces
Stabilized flash voltage +/- 0.5%
Standards EC standard 73/23, UL 122
Power requirements Version 1: 220-240 V / 50 Hz, switchable to 120 V / 60 Hz, current consumption 10A, longer series with shorter charging times 16A.Version 2: 110-120 V / 60 Hz, switchable to 230 V / 50 Hz, current consumption 15A.Version 3: 100 V / 50 Hz, switchable to 230 V / 50 Hz, current consumption 15A.
Dimensions 288 x 180 x 407.5 mm
http://www.bron.ch/products/31_176_xx.htm (2 van 3) [26-11-2001 08:38:33]
Grafit A4
Weight 11 kg
Compatibility
Power packs Grafit A2 plus, A4 plus, A4, 2, 4, Pulso 2, 4, A2, A4, 8, Opus 2, A2, 4, A4, A8, Primo, Primo A, Primo A fashion, Primo 4
Compact units Compuls 65, 95, 165, Minipuls C40, C80, C200
Lamp bases Pulso 2, F2, 4, F4, 8*, Twin, Primo, Universal lamp base, with RT plug
Remote control Servor e, Servor 3, Servor 2 (without additional functions)
Remote release IRI, FM (range approx. 7 m)IRQ, FCM 2, FCC, IRS (range approx. 10 m)IRX 2, IRX, IRS-E (range approx. 30 m)
* on reserve connection only
Special featuresAutomatic colour temperature control, called CTC.The auxiliary functions may be used for example for:
- alternating release to reduce flash sequence times using two power packs (ping-pong mode)
- fast strobo sequences (can be used as quasi-continuous light to asses precisely shadow edges etc.)
http://www.bron.ch/products/31_176_xx.htm (3 van 3) [26-11-2001 08:38:33]
Grafit A2 plus
Grafit A2 plus Article no. 31.167.XX
Product summaryEasy to use illuminated front panel + 6.7 f-stop power variation + 3 independent outlets + colour temperature control + selectable flash duration t 0.1 up to 1/6000s + charging in 0.03 to 1.3s (230V) + IR triggering and remote control + fully controllable from Mac or PC + proportional modelling light + delay + sequence triggering + stroboscopic
Product descriptionMicroprocessor-controlled power pack (1600 J) with 3 lamp base connections, stabilized colour temperature on 2 main connections, variable output distribution (asymmetrical/symmetrical), 6.7 f-stops for main connections, 4 f-stops for reserve connection, in 1/10 or 1/3 f-stop intervals, displayed simultaneously in joules and f-stops, joules switchable to percentage, fully illuminated control panel and LCD-display, flash duration selectable on main connections, short-time exposure selectable, CTC (Colour Temperature Control) for uniform or deliberately variable colour temperature with broncolor FCC (Flash Colour Chronoscope), proportional modelling light over entire output range. Additional functions: Flash sequences, triggering delay, selectable flash duration, slow charging, ping-pong release, stroboscopic effects with one or more power packs, choice of two infrared channels; etc., easy to use menu operated functions, menu text available in multiple languages (German, English, French etc.)
Grafit A plus additionsAll functions of the power pack can be controlled directly with the PC or Mac via the built-in interface. When using the monitor you have the possibility to store the lighting situations in 4, instead of 2, memories. In addition every lamp can be identified and described with an address for the lighting function.
Scope of deliveryPower pack with power cable 5 m, operating instructions.
Technical data
http://www.bron.ch/products/31_167_xx.htm (1 van 3) [26-11-2001 08:38:39]
Grafit A2 plus
Flash energy 1600 J
F-stop at distance of 2 m (6 1/2 ft.),100 ISO, reflector P70
64 2/10
Flash duration t 0.1 (t 0.5)
1/150 - 1/6000 s(1/450 - 1/10000 s)Flash duration and energy automatically regulated for optimum colour temperature. Flash duration can be preselected.
Charging time(for 100% of selected energy)
Version 1 (230 V): 0.03 - 1.3 sVersion 2 (120 V): 0.03 - 1.6 sVersion 3 (100 V): 0.03 - 2.2 sCan be switched to slow charging mode for low-amperage power outlets
Ready display Visual and audible (can be switched off); signals when 100 % of selected energy is reached
Lamp base outlets 2 main connections with flash cut-off and 1 reserve connection
Power output distribution
Symmetrical and variable asymmetrical
Controls Illuminated silicone keyboard, resistant to dust and scratches. Wireless remote control with infrared Servor e.
Control range 6 7/10 f-stops for main connections, 4 f-stops for reserve connection, in 1/10 or 1/3 f-stop intervalsDisplay simultaneously in joules and f-stops, joules switchable to percentage
Colour temperature CTC (Colour Temperature Control) for uniform or deliberately variable colour temperature with broncolor FCC (Flash Colour Chronoscope)
Modelling light Halogen, max. 3 x 650 W at 200 - 240 VHalogen, max. 3 x 300 W at 100 - 120 VProportional to flash energy and «full» and «low» settings. Proportionality adjustable to other broncolor power packs and their various output ranges
Additional functions Flash sequences, triggering delay, selectable flash duration, slow charging, ping-pong release, stroboscopic effects with one or more power packs, select from two infrared channels; etc.Easy to use menu operated functions. Menu text available in multiple languages (German, English, French, etc.)
Flash release Manual release button, sync cable,selectable photocell or wireless via selectable IR-receiver
Sync sockets 2 pieces
Stabilized flash voltage +/- 0.5%
Standards EC standard 73/23, UL 122
http://www.bron.ch/products/31_167_xx.htm (2 van 3) [26-11-2001 08:38:39]
Grafit A2 plus
Power requirements Version 1: 220-240 V / 50 Hz, switchable to 120 V / 60 Hz, current consumption 10A, longer series with shorter charging times 16A.Version 2: 110-120 V / 60 Hz, switchable to 230 V / 50 Hz, current consumption 15A.Version 3: 100 V / 50 Hz, switchable to 230 V / 50 Hz, current consumption 15A.
Dimensions 288 x 180 x 311.5 mm
Weight 8 kg
Compatibility
Power packs Grafit A2 plus, A4 plus, A4, 2, 4, Pulso 2, 4, A2, A4, 8, Opus 2, A2, 4, A4, A8, Primo, Primo A, Primo A fashion, Primo 4
Compact units Compuls 65, 95, 165, Minipuls C40, C80, C200
Lamp bases Pulso 2, F2, 4, F4, 8*, Twin, Primo, Universal lamp base, with RT plug
Remote control Servor e, Servor 3, Servor 2 (without additional functions)
Remote release IRI, FM (range approx. 7 m)IRQ, FCM 2, FCC, IRS (range approx. 10 m)IRX 2, IRX, IRS-E (range approx. 30 m)
* on reserve connection only
Special featuresAutomatic colour temperature control, called CTC.The auxiliary functions may be used for example for:- alternating release to reduce flash sequence times using two power packs (ping-pong mode)- fast strobo sequences (can be used as quasi-continuous light to asses precisely shadow edges etc.)
http://www.bron.ch/products/31_167_xx.htm (3 van 3) [26-11-2001 08:38:39]
Grafit A4 plus
Grafit A4 plus Article no. 31.177.XX
Product summaryEasy to use illuminated front panel + 6.7 f-stop power variation + 3 independent outlets + colour temperature control + selectable flash duration t 0.1 up to 1/6000s + charging in 0.04 to 2.6s (230V) + IR triggering and remote control + fully controllable from Mac or PC + proportional modelling light + delay + sequence triggering + stroboscopic
Product descriptionMicroprocessor-controlled power pack (3200 J) with 3 lamp base connections, stabilized colour temperature on 2 main connections, variable output distribution (asymmetrical/symmetrical), 6.7 f-stops for main connections, 4 f-stops for reserve connection, in 1/10 or 1/3 f-stop intervals, displayed simultaneously in joules and f-stops, joules switchable to percentage, fully illuminated control panel and LCD-display, flash duration selectable on main connections, short-time exposure selectable, CTC (Colour Temperature Control) for uniform or deliberately variable colour temperature with broncolor FCC (Flash Colour Chronoscope), proportional modelling light over entire output range. Additional functions: Flash sequences, triggering delay, selectable flash duration, slow charging, ping-pong release, stroboscopic effects with one or more power packs, choice of two infrared channels; etc., easy to use menu operated functions, menu text available in multiple languages (German, English, French etc.)
Grafit A plus additionsAll functions of the power pack can be controlled directly with the PC or Mac via the built-in interface. When using the monitor you have the possibility to store the lighting situations in 4, instead of 2, memories. In addition every lamp can be identified and described with an address for the lighting function.
Scope of deliveryPower pack with power cable 5 m, operating instructions.
Technical data
http://www.bron.ch/products/31_177_xx.htm (1 van 3) [26-11-2001 08:38:45]
Grafit A4 plus
Flash energy 3200 J
F-stop at distance of 2 m (6 1/2 ft.),100 ISO, reflector P70
90 2/10
Flash duration t 0.1 (t 0.5)
1/180 - 1/6000 s(1/240 - 1/10000 s)Flash duration and energy automatically regulated for optimum colour temperature. Flash duration can be preselected.
Charging time(for 100% of selected energy)
Version 1 (230 V): 0.04 - 2.6 sVersion 2 (120 V): 0.04 - 3.6 sVersion 3 (100 V): 0.04 - 4.4 sCan be switched to slow charging mode for low-amperage power outlets
Ready display Visual and audible (can be switched off); signals when 100 % of selected energy is reached
Lamp base outlets 2 main connections with flash cut-off and 1 reserve connection
Power output distribution
Symmetrical and variable asymmetrical
Controls Illuminated silicone keyboard, resistant to dust and scratches. Wireless remote control with infrared Servor e.
Control range 6 7/10 f-stops for main connections, 4 f-stops for reserve connection, in 1/10 or 1/3 f-stop intervalsDisplay simultaneously in joules and f-stops, joules switchable to percentage
Colour temperature CTC (Colour Temperature Control) for uniform or deliberately variable colour temperature with broncolor FCC (Flash Colour Chronoscope)
Modelling light Halogen, max. 3 x 650 W at 200 - 240 VHalogen, max. 3 x 300 W at 100 - 120 VProportional to flash energy and «full» and «low» settings. Proportionality adjustable to other broncolor power packs and their various output ranges
Additional functions Flash sequences, triggering delay, selectable flash duration, slow charging, ping-pong release, stroboscopic effects with one or more power packs, select from two infrared channels; etc.Easy to use menu operated functions. Menu text available in multiple languages (German, English, French, etc.)
Flash release Manual release button, sync cable,selectable photocell or wireless via selectable IR-receiver
Sync sockets 2 pieces
Stabilized flash voltage +/- 0.5%
Standards EC standard 73/23, UL 122
http://www.bron.ch/products/31_177_xx.htm (2 van 3) [26-11-2001 08:38:45]
Grafit A4 plus
Power requirements Version 1: 220-240 V / 50 Hz, switchable to 120 V / 60 Hz, current consumption 10A, longer series with shorter charging times 16A.Version 2: 110-120 V / 60 Hz, switchable to 230 V / 50 Hz, current consumption 15A.Version 3: 100 V / 50 Hz, switchable to 230 V / 50 Hz, current consumption 15A.
Dimensions 288 x 180 x 407.5 mm
Weight 11 kg
Compatibility
Power packs Grafit A2 plus, A4 plus, A4, 2, 4, Pulso 2, 4, A2, A4, 8, Opus 2, A2, 4, A4, A8, Primo, Primo A, Primo A fashion, Primo 4
Compact units Compuls 65, 95, 165, Minipuls C40, C80, C200
Lamp bases Pulso 2, F2, 4, F4, 8*, Twin, Primo, Universal lamp base, with RT plug
Remote control Servor e, Servor 3, Servor 2 (without additional functions)
Remote release IRI, FM (range approx. 7 m)IRQ, FCM 2, FCC, IRS (range approx. 10 m)IRX 2, IRX, IRS-E (range approx. 30 m)
* on reserve connection only
Special featuresAutomatic colour temperature control, called CTC.The auxiliary functions may be used for example for:- alternating release to reduce flash sequence times using two power packs (ping-pong mode)- fast strobo sequences (can be used as quasi-continuous light to asses precisely shadow edges etc.)
http://www.bron.ch/products/31_177_xx.htm (3 van 3) [26-11-2001 08:38:45]
Power pack Topas A2
Topas A2 Article no. 31.168.XX
Product descriptionMicroprocessor controlled power pack with 2 lamp base connections. Automatic adaptation to the respective mains (AC-line) voltage. Flash energy 1600J (Japanese version 1200J). Symmetrical and variable individual (asymmetrical) output distribution. Control range: 5 f-stops in 1/10 f-stop intervals. Internal discharge when power setting is reduced. Photocell (can be switched off) and separate infrared receiver (can be switched off). Illuminated silicone keyboard and LED-display, resistant to dust and scratches. Modelling light with 5 proportionality levels, adjustable to all broncolor power packs and compact units. Ready display visual and audible. Dim-function of the modelling light during charging. Ready buzzer (can be switched off). Can be switched to slow charging mode. High repetitive accuracy for digital photography. Compatible with entire broncolor range. Newly connected lamp bases are activated automatically.
Individual energy distribution Topas A2If the unit is set to individual energy distribution the power is divided between the two lamp base outlets.Lamp base outlet 1 = 60%The control range of the flash energy extends between 1000 J down to 65 J. (optional down to 30 J)Lamp base outlet 2 = 40%The control range of the flash energy extends between 600 J down to 40 J.
http://www.bron.ch/products/31_168_xx.html (1 van 4) [26-11-2001 08:38:52]
Power pack Topas A2
(optional down to 20 J)
Individual energy distribution Topas A2 on mains (AC-line) voltage 100 VLamp base outlet 1 = 60%The control range of the flash energy extends between 700 J down to 45 J.(optional down to 20 J)Lamp base outlet 2 = 40%The control range of the flash energy extends between 500 J down to 30 J.(optional down to 15 J)
Scope of deliveryPower pack with mains cable, operating instructions
Technical data
Flash energy 1600 J (Japanese: 1200 J)
F-stop at 2 m 100 ISO, reflector P70
64 2/10
Flash duration t 0.1 (t 0.5)
1600 J: 1/300 s (1/1000 s)1000 J: 1/400 s (1/1300 s)600 J: 1/500 s (1/1600 s)
Charging time(for 100% of selected energy)
200-240 V / 110-120 V: 0,4 - 1,8 s100 V: 0,5 – 2 sAutomatic adaptation to the respective mains (AC-line) voltageCan be switched to slow charging mode
Ready display Visual and audible (can be switched off); signals when 100 % of selected energy is reached
Lamp base connections 2
Power output distribution
Symmetrical and variable individual (asymmetrical)
Controls Illuminated silicone keyboard and LED-display, resistant to dust and scratches
Control range 4 f-stops in 1/10 f-stops intervals (1:16)can be switched to 5 f-stops (1:32)
http://www.bron.ch/products/31_168_xx.html (2 van 4) [26-11-2001 08:38:52]
Power pack Topas A2
Modelling light Halogen max. 2 x 650 W at 200 – 240 VHalogen max. 2 x 300 W at 100 – 120 V
Proportional to flash energy and «full» and «low» settings. Proportionality adjustable to other broncolor power packs and compact units and their various output ranges
Flash release Manual release button, photocell able to be switched off, IR-receiver able to be switched off, sync cable, FCM 2, FCC, IRX, IRQ
No. of sync sockets 2
Stabilized flash voltage +/- 1%
Standards EC standard 73/23, UL 122
Power requirements 200-240 V / 50 Hz: 10 A110-120 V / 50-60 Hz: 16 A100 V / 50 Hz: 16 A
Dimensions 280 x 162,7 x 272 mm
Weight kg 5,8
Compatibility
Power packs Grafit 2, 4, A2, A4, A2 plus, A4 plus,Topas A4, A8MobilPulso 2, 4, A2, A4, 8Opus 2, A2, 4, A4, A8Primo, Primo A, Primo A fashion, Primo 4Flashman, Flashman 2, 304, 404, 404 Servor
Compact units Minipuls D160Minipuls C40, C80, C200, Minipuls 40, 80Compuls 65, 95, 165
Lamp bases Mobilite, PicolitePulso 2, F2, 4, F4, 8, Pulso-Twin, Primo,Ringflash, Pulso-Spot 4Universal lamp base, with RT plug
Remote release IRI, FM (range approx. 7 m)IRQ, FCM2, FCC, IRS (range approx. 10 m)IRX2, IRX, IRS-E (range approx. 30 m)
http://www.bron.ch/products/31_168_xx.html (3 van 4) [26-11-2001 08:38:52]
Power pack Topas A2
Battery operation The 220V version of the Topas A can be operated, without modelling light, using a car battery converter.
Special featuresa. Fan cooling effect for long flash seriesb. Control range of the flash energy can be extended, optionally, to 5 f-stopsc. The digital power displays of both lamp outlets can be set, optionally, so that the maximum output of each outlet is always shown
with a value of 10.d. Audible signal when operating mode is changed from 110-120V to 200-240Ve. Topas A2 is protected by a robust metal housing with partial hard rubber componentsf. Thermal protectiong. Circuit breaker
ApplicationAll types of flash photography
http://www.bron.ch/products/31_168_xx.html (4 van 4) [26-11-2001 08:38:52]
Power pack Topas A4
Topas A4 Article no. 31.178.XX
Product descriptionMicroprocessor controlled power pack with 2 lamp base connections. Automatic adaptation to the respective mains (AC-line) voltage. Flash energy 3200J (Japanese version 2400J). Symmetrical and variable individual (asymmetrical) output distribution. Control range: 5 f-stops in 1/10 f-stop intervals. Internal discharge when power setting is reduced. Photocell (can be switched off) and separate infrared receiver (can be switched off). Illuminated silicone keyboard and LED-display, resistant to dust and scratches. Modelling light with 5 proportionality levels, adjustable to all broncolor power packs and compact units. Ready display visual and audible. Dim-function of the modelling light during charging. Ready buzzer (can be switched off). Can be switched to slow charging mode. High repetitive accuracy for digital photography. Compatible with entire broncolor range. Newly connected lamp bases are activated automatically.
Individual energy distribution Topas A4If the unit is set to individual energy distribution the power is divided between the two lamp base outlets.Lamp base outlet 1 = 70%The control range of the flash energy extends between 2200 J down to 138 J. (optional down to 69 J)Lamp base outlet 2 = 30%The control range of the flash energy extends between 1000 J down to 63 J.
http://www.bron.ch/products/31_178_xx.html (1 van 4) [26-11-2001 08:38:58]
Power pack Topas A4
(optional down to 32 J)
Individual energy distribution Topas A4 on mains (AC-line) voltage 100 VLamp base outlet 1 = 70%The control range of the flash energy extends between 1700 J down to 106 J.(optional down to 53 J)Lamp base outlet 2 = 30%The control range of the flash energy extends between 700 J down to 44 J.(optional down to 22 J)
Scope of deliveryPower pack with mains cable, operating instructions
Technical data
Flash energy 3200 J (Japanese: 2400 J)
F-stop at 2 m 100 ISO, reflector P70
90 2/10
Flash duration t 0.1 (t 0.5)
3200 J: 1/150 s (1/600 s)2200 J: 1/200 s (1/800 s)1000 J: 1/300 s (1/1300 s)
Charging time(for 100% of selected energy)
200-240 V / 110-120 V: 0,7 – 3,4 s100 V: 0,5 – 4 sAutomatic adaptation to the respective mains (AC-line) voltageCan be switched to slow charging mode
Ready display Visual and audible (can be switched off); signals when 100 % of selected energy is reached
Lamp base connections 2
Power output distribution
Symmetrical and variable individual (asymmetrical)
Controls Illuminated silicone keyboard and LED-display, resistant to dust and scratches
Control range 4 f-stops in 1/10 f-stops intervals (1:16)can be switched to 5 f-stops (1:32)
http://www.bron.ch/products/31_178_xx.html (2 van 4) [26-11-2001 08:38:58]
Power pack Topas A4
Modelling light Halogen max. 2 x 650 W at 200 – 240 VHalogen max. 2 x 300 W at 100 – 120 V
Proportional to flash energy and «full» and «low» settings. Proportionality adjustable to other broncolor power packs and compact units and their various output ranges
Flash release Manual release button, photocell able to be switched off, IR-receiver able to be switched off, sync cable, FCM 2, FCC, IRX, IRQ
No. of sync sockets 2
Stabilized flash voltage +/- 1%
Standards EC standard 73/23, UL 122
Power requirements 200-240 V / 50 Hz: 10 A110-120 V / 50-60 Hz: 16 A100 V / 50 Hz: 16 A
Dimensions 280 x 162,7 x 322 mm
Weight kg 8
Compatibility
Power packs Grafit 2, 4, A2, A4, A2 plus, A4 plus,Topas A2, A8MobilPulso 2, 4, A2, A4, 8Opus 2, A2, 4, A4, A8Primo, Primo A, Primo A fashion, Primo 4Flashman, Flashman 2, 304, 404, 404 Servor
Compact units Minipuls D160Minipuls C40, C80, C200, Minipuls 40, 80Compuls 65, 95, 165
Lamp bases Mobilite, PicolitePulso 2, F2, 4, F4, 8, Pulso-Twin, Primo,Ringflash, Pulso-Spot 4Universal lamp base, with RT plug
Remote release IRI, FM (range approx. 7 m)IRQ, FCM2, FCC, IRS (range approx. 10 m)IRX2, IRX, IRS-E (range approx. 30 m)
http://www.bron.ch/products/31_178_xx.html (3 van 4) [26-11-2001 08:38:58]
Power pack Topas A4
Battery operation The 220V version of the Topas A can be operated, without modelling light, using a car battery converter.
Special featuresa. Fan cooling effect for long flash seriesb. Control range of the flash energy can be extended, optionally, to 5 f-stopsc. The digital power displays of both lamp outlets can be set, optionally, so that the maximum output of each outlet is always shown
with a value of 10.d. Audible signal when operating mode is changed from 110-120V to 200-240Ve. Topas A2 is protected by a robust metal housing with partial hard rubber componentsf. Thermal protectiong. Circuit breaker
ApplicationAll types of flash photography
http://www.bron.ch/products/31_178_xx.html (4 van 4) [26-11-2001 08:38:58]
Generator Topas A8
Topas A8 Article no. 31.181.XX
Product descriptionMicroprocessor controlled power pack with 2 lamp base connections. Flash energy 6100 J. Symmetrical and variable individual (asymmetrical) output distribution. Control range: 5 f-stops in 1/10 f-stop intervals. Internal discharge when power setting is reduced. Photocell (can be switched off) and separate infrared receiver (can be switched off). Illuminated silicone keyboard and LED-display, resistant to dust and scratches. Modelling light with 5 proportionality levels, adjustable to all broncolor power packs and compact units. Ready display visual and audible. Dim-function of the modelling light during charging. Ready buzzer (can be switched off). Can be switched to slow charging mode. High repetitive accuracy for digital photography. Compatible only with broncolor Pulso 8 lamp bases. Newly connected lamp bases are activated automatically.
Individual energy distribution Topas A8If the unit is set to individual energy distribution the power is divided between the two lamp base outlets.Lamp base outlet 1 = 70%The control range of the flash energy extends between 4300 J down to 270 J. (optional down to 135 J)Lamp base outlet 2 = 30%
http://www.bron.ch/products/31_181_xx.html (1 van 4) [26-11-2001 08:39:04]
Generator Topas A8
The control range of the flash energy extends between 1800 J down to 110 J. (optional down to 55 J)
Scope of deliveryPower pack with mains cable, operating instructions
Technical data
Flash energy 6100 J (Japanese: 4600 J)
F-stop at 2 m 100 ISO, reflector P65
128
Flash duration t 0.1 (t 0.5)
6100 J: 1/50 s (1/230 s)4300 J: 1/100 s (1/330 s)1800 J: 1/150 s (1/540 s)
Charging time (for 100% of selected energy)
0,5 – 5,2 s
Can be switched to slow charging mode
Ready display Visual and audible (can be switched off); signals when 100 % of selected energy is reached
Lamp base connections 2
Power output distribution
Symmetrical and variable individual (asymmetrical)
Controls Illuminated silicone keyboard and LED-display, resistant to dust and scratches
Control range 4 f-stops in 1/10 f-stops intervals (1:16)can be switched to 5 f-stops (1:32)
Modelling light Halogen max. 2 x 650 W at 200 – 240 V
Proportional to flash energy and «full» and «low» settings. Proportionality adjustable to other broncolor power packs and compact units and their various output ranges
Flash release Manual release button, photocell able to be switched off, IR-receiver able to be switched off, sync cable, FCM 2, FCC, IRX, IRQ
No. of sync sockets 2
Stabilized flash voltage +/- 1%
http://www.bron.ch/products/31_181_xx.html (2 van 4) [26-11-2001 08:39:04]
Generator Topas A8
Standards EC standard 73/23, UL 122
Power requirements 200-240 V / 50 Hz: 10 A
Dimensions 280 x 162,7 x 446 mm
Weight kg 12,6
Compatibility
Power packs Grafit 2, 4, A2, A4, A2 plus, A4 plus,Topas A2, A4MobilPulso 2, 4, A2, A4, 8Opus 2, A2, 4, A4, A8Primo, Primo A, Primo A fashion, Primo 4Flashman, Flashman 2, 304, 404, 404 Servor
Compact units Minipuls D160Minipuls C40, C80, C200, Minipuls 40, 80Compuls 65, 95, 165
Lamp bases Compatible only with Pulso 8 lamp bases
Remote release IRI, FM (range approx. 7 m)IRQ, FCM2, FCC, IRS (range approx. 10 m)IRX2, IRX, IRS-E (range approx. 30 m)
Battery operation The 220V version of the Topas A can be operated, without modelling light, using a car battery converter.
Special featuresa. Fan cooling effect for long flash seriesb. Control range of the flash energy can be extended, optionally, to 5 f-stopsc. The digital power displays of both lamp outlets can be set, optionally, so that the maximum output of each outlet is always shown
with a value of 10.d. Topas A8 is protected by a robust metal housing with partial hard rubber componentse. Thermal protectionf. Circuit breaker
Application
http://www.bron.ch/products/31_181_xx.html (3 van 4) [26-11-2001 08:39:04]
Generator Topas A8
All types of flash photography
http://www.bron.ch/products/31_181_xx.html (4 van 4) [26-11-2001 08:39:04]
Mobil
Battery-operated power pack Mobil Article no. 31.010.XX
Product designation
Battery-operated power pack Mobil Article no. 31.010.XX
Product descriptionBattery-operated power pack with 2 lamp base outlets. Range of variation over 4 f-stops in 1/10 intervals. Fully illuminated control panel and LCD display. Halogen modelling light, each lamp 50 W if two lamp bases are connected, respectively 100 W if only one lamp base is connected. Automatic switch-off after a variable time. Internal discharge when power setting is reduced. Illuminated silicone keyboard, proof against dust and scratches, and LED display. Photocell and infrared receiver can be switched off independently. Possibility of slow charging to increase the number of flashes of each charge. Automatic switch-off of the power pack after a selectable delay time. Becomes a complete studio power pack with automatic voltage adaptation 100 – 240 V when fitted with the broncolor Studio Booster. High repetitive accuracy for digital photography. Compatible with entire broncolor range. Simple exchange of rechargeable battery by plug-in procedure.
Scope of deliveryPower pack with rechargeable battery, operating instructions.
Technical data
http://www.bron.ch/products/31_010_xx.htm (1 van 5) [26-11-2001 08:39:09]
Mobil
Battery operation Operation with Studio Booster
Flash energy 1200 J 1500 J (Japan:1200 J)
f-stop at distance of 2 m (6 1/2 ft.), 100 ISO, reflector P70
45 6/10 45 9/10 (Japan: 45 6/10)
Flash duration t 0.1 (t 0.5) 1 lamp: 1/230 (1/680) s 1/220 (1/650) s
2 lamps:1/360 (1/1100) s
1/330 (1/1000) s
Charging time 1.5 - 6 s quick charge 0.6 - 2.4 s
(for 100% of selected energy) 2 - 13 s slow charge (Japan: 0.7 - 2.9 s)
Slow charge to prolong battery life No
Ready display visual and audible (can be switched off); signals when 100 % of selected energy is reached
Lamp base outlets 2 2
Power output distribution symmetrical symmetrical
Controls fully illuminated silicone keyboard, resistant to dust and scratches, LED display.
Control range 4 f-stops in 1/10 f-stop intervals (1:16)
Modelling light (Halogen) 2 x 50 W or 1 x 100 W 200-240 V: 2 x 650 W
100-120 V: 2 x 250 W
Modelling light control automatic switch-off after a selectable time from 20 s to 80 s to prolong battery life
full, proportional to flash energy, 5 prop. levels, adjustable to other broncolor power packs, compact units and their various output ranges
http://www.bron.ch/products/31_010_xx.htm (2 van 5) [26-11-2001 08:39:09]
Mobil
Flash release manual release button, selectable photocell or wireless via built-in selectable infrared receiver, sync cable, FCM 2, FCC, IRX 2, IRQ
Stabilized flash voltage +/- 1 % +/- 1 %
Standards EC standard 73/23, UL 122
Power requirements 220-240 V / 50 Hz: 10 A110-120 V / 60 Hz: 16 A100 V / 50 Hz: 16 A
Dimensions 235x144x275 mm 235x144x332 mm
Weight 7 kg
Compatibility
Power packs Grafit 2, A2, A2 plus, 4, A4, A4 plusPulso 2, 4, A2, A4Opus 2, A2, 4, A4Primo, Primo A, Primo A fashion, Primo 4
Compact units Compuls 65, 95, 165,Minipuls C40, C80, C200, D160
Lamps Mobilite, Picolite, Pulso 2, F2, 4, F4, Pulso-Twin, Primo, Universal lamps, Ringflash, Pulso-Spot 4
Remote release IRI, FM, IRQ, FCM 2, FCC, IRS (range 10 m / 32 ft.)IRX 2, IRX, IRS-E (range 30 m / 96 ft.)
http://www.bron.ch/products/31_010_xx.htm (3 van 5) [26-11-2001 08:39:09]
Mobil
Accessories
Mobil Travel Kit art. no. 31.020.XX
Studio Booster to Mobil art. no. 36.120.00
Rechargeable plug-in battery to Mobil art. no. 36.123.00
Mobilite lamp art. no. 32.010.00
Bag to battery-operated Mobil power pack art. no. 36.513.00
Travel bag to Mobil art. no. 36.512.00
Charger to Mobil art. no. 36.121.XX
Special features
● When operating with the broncolor Studio Booster the modelling light of the studio lamps (Pulso lamps, Primo lamps, etc.) functions normally, the 12 V modelling light of the battery-operated lamp Mobilite is not operating.
● When operating with battery, the 12 V modelling light of the battery-operated lamp Mobilite functions normally, the modelling light of the studio lamps is not operating.
● Damage to the modelling lamp is impossible due to plug coding.
● Entered data are retained for a short time after the battery has been removed (respectively after disconnection from the mains (AC-line) supply).
Application
http://www.bron.ch/products/31_010_xx.htm (4 van 5) [26-11-2001 08:39:09]
Mobil
● All types of flash photography in and outdoors.
http://www.bron.ch/products/31_010_xx.htm (5 van 5) [26-11-2001 08:39:09]
Power packs
Mobil
broncolor Studio Booster
36.120.xx
Plug-in to adapt the battery powered Mobil to a complete studio power packFlash energy 1500JCharging time 2.4 s (at 230 V)Modelling light 2 x 650 W (at 230 V)
http://www.bron.ch/products/36_120_xx.htm [26-11-2001 08:39:12]
Mobil
Mobil Travel Kit Article no. 31.020.XX
Mobil Travel Kit: Everything you need.
The Mobil and Mobilite are also available as a kit.
http://www.bron.ch/products/31_020_xx.htm (1 van 2) [26-11-2001 08:39:17]
Mobil
The Mobil Travel Kit contains:
● 1 Mobil battery-operated power pack● 1 Mobilite small lamp with flash tube, protecting glass and modelling lamp● 1 charger● 1 travel bag
The handy bag has room for an extra Mobilite, a spare battery , and accessories.
http://www.bron.ch/products/31_020_xx.htm (2 van 2) [26-11-2001 08:39:17]
Primo
Primo Article no. 31.130.XX
Product summaryBasic pack + 3 f-stop power variation + 3 outlets + microprocessor controlled + proportional modelling light
Product descriptionPower pack with 3 lamp base connections, 1600 J flash energy, three-stop adjustment range (in 1/3-stop intervals) with rotary knob, fast/slow charging mode selector, built-in photocell, proportional modelling light (corresponds prop3), internal discharge when power setting is reduced.
Scope of deliveryPower pack with power cable, bag with spare fuse, dust cover, instruction manual.
Technical data
Flash energy 1600 J
F-stop at distance of 2 m (6 1/2 ft.),100 ISO, reflector P70
64 1/10
Flash duration t 0.1 (t 0.5)
1 lamp : 1/230 (1/170)2 lamp : 1/390 (1/1200)3 lamp : 1/530 (1/1700)
Charging time(for 100% of selected energy)
1.1 - 2.3 sCan be switched to slow charging
http://www.bron.ch/products/31_130_xx.htm (1 van 2) [26-11-2001 08:39:22]
Primo
Ready display Visual and audible (can be inhibited)
Lamp base connections 3
Power distribution Symmetrical
Control range 3 stops, in calibrated 1/3-stop intervals, with rotary switch
Halogen modelling light max. 3 x 650 W, 200-240 Vproportional to flash energy,switch settings: prp2, prop3, off, full
Flash triggering photocell, sync cable, manual release button
Stabilized flash voltage +/- 2%
Standards EC standard 73/23, UL 122
Power requirements 200 - 240 V, 16A
Dimensions 275 x 275 x 162 mm
Weight 6.2 kg
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8, Primo A, Primo A fashion, Primo 4,
Flashman 2, 304, 404, 404 Servor
Lamp bases Primo, Pulso 2, F2, 4, F4, Pulso Twin, Hazylight, Universal lamp, Boxlite 30 and 40, Striplite (2 x 3200), Lightbar 60/120, Pulso spot 4, Profil, Pulso 8 with restrictions
AccessoriesInfrared receiver IR receiver Art. no. 36.104.00
Battery converter Art. no. 36.450.XX
Travel bag Primo, empty Art. no. 36.502.00
Special featuresPrimo discharges internally when the power setting is reduced and has an overload circuit breaker. The built-in low-noise cooling fan protects the unit during long shooting sessions.
http://www.bron.ch/products/31_130_xx.htm (2 van 2) [26-11-2001 08:39:22]
Primo bi-voltage
Primo bi-voltage Article no. 31.132.XX
Product summaryBasic pack + asymmetric power distribution + 3 f-stop power variation + 3 outlets + microprocessor controlled + available in dual-voltage for 100/230 V + proportional modelling light
Product descriptionPower pack with 3 lamp base connections, 1600 J flash energy, three-stop adjustment range (in 1/3-stop intervals) with rotary knob, fast/slow charging mode selector, built-in photocell, proportional modelling light (corresponds prop3), internal discharge when power setting is reduced.
Scope of deliveryPower pack with power cable, bag with spare fuse, dust cover, instruction manual.
Technical data
Flash energy 1600 J
F-stop at distance of 2 m (6 1/2 ft.),100 ISO, reflector P70
64 1/10
Flash duration t 0.1 (t 0.5)
1 lamp : 1/230 (1/170)2 lamp : 1/390 (1/1200)3 lamp : 1/530 (1/1700)
Charging time(for 100% of selected energy)
1.4 - 2.5 sCan be switched to slow charging
http://www.bron.ch/products/31_132_xx.htm (1 van 2) [26-11-2001 08:39:27]
Primo bi-voltage
Ready display Visual and audible (can be inhibited)
Lamp base connections 3
Power distribution Symmetrical
Control range 3 stops, in calibrated 1/3-stop intervals, with rotary switch
Halogen modelling light max. 3 x 650 W, 200-240 Vmax. 3 x 300 W, 100-120 Vproportional to flash energy,switch settings: prp2, prop3, off, full
Flash triggering photocell, sync cable, manual release button
Stabilized flash voltage +/- 2%
Standards EC standard 73/23, UL 122
Power requirements 200 - 240 V, 16A100 - 120 V, 16A
Dimensions 275 x 275 x 162 mm
Weight 6.5 kg
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8, Primo A, Primo A fashion, Primo 4,
Flashman 2, 304, 404, 404 Servor
Lamp bases Primo, Pulso 2, F2, 4, F4, Pulso Twin, Hazylight, Universal lamp, Boxlite 30 and 40, Striplite (2 x 3200), Lightbar 60/120, Pulso spot 4, Profil, Pulso 8 with restrictions
AccessoriesInfrared receiver IR receiver Art. no. 36.104.00
Battery converter Art. no. 36.450.XX
Travel bag Primo, empty Art. no. 36.502.00
Special featuresPrimo discharges internally when the power setting is reduced and has an overload circuit breaker. The built-in low-noise cooling fan protects the unit during long shooting sessions.
http://www.bron.ch/products/31_132_xx.htm (2 van 2) [26-11-2001 08:39:27]
Primo A fashion
Primo A fashion Article no. 31.134.XX
Product summaryBasic pack + shortest flash duration 1/2800 s + asymmetric power distribution + 3 f-stop power variation + 2 outlets + microprocessor controlled + available in dual-voltage for 100/230 V + proportional modelling light
Product descriptionPower pack with 2 lamp base connections, 1000 J flash energy, three-stop adjustment range (in 1/3-stop intervals) with rotary knob, fast/slow charging mode selector, built-in photocell, proportional modelling light, internal discharge when power setting is reduced
Scope of deliveryPower pack with power cable, bag with spare fuse, dust cover, instruction manual.
Technical data
Flash energy 1000 J
F-stop at distance of 2 m (6 1/2 ft.),100 ISO, reflector P70
45 1/3
Flash duration t 0.1 (t 0.5)
only outlet A occupied 1/400 (1/1200)outlet A+B occupied 1/550 (1/1700)only outlet B occupied1/950 (1/2800)
Charging time(for 100% of selected energy)
0.18 - 0.9 sCan be switched to slow charging
http://www.bron.ch/products/31_134_xx.htm (1 van 2) [26-11-2001 08:39:33]
Primo A fashion
Ready display Visual and audible (can be inhibited)
Lamp base connections 2
Power distribution Asymmetrical
Control range 3 stops, in calibrated 1/3-stop intervals, with rotary switch
Halogen modelling light max. 2 x 650 W, 200-240 Vproportional to flash energy,switch settings: prop4, prop3, off, full
Flash triggering photocell, sync cable, manual release button
Stabilized flash voltage +/- 2%
Standards EC standard 73/23, UL 122
Power requirements 200 - 240 V, 16A100 - 120 V, 16A
Dimensions 275 x 275 x 162 mm
Weight 4.95 kg
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8, Primo A, Primo A fashion, Primo 4,
Flashman 2, 304, 404, 404 Servor
Lamp bases Primo, Pulso 2, F2, 4, F4, Pulso Twin, Hazylight, Universal lamp, Boxlite 30 and 40, Striplite (2 x 3200), Lightbar 60/120, Pulso spot 4, Profil, Pulso 8 with restrictions
AccessoriesInfrared receiver IR receiver Art. no. 36.104.00
Battery converter Art. no. 36.450.XX
Travel bag Primo, empty Art. no. 36.502.00
Special featuresPrimo A fashion discharges internally when the power setting is reduced and has an overload circuit breaker. The built-in low-noise cooling fan protects the unit during long shooting sessions.
http://www.bron.ch/products/31_134_xx.htm (2 van 2) [26-11-2001 08:39:33]
http://www.bron.ch/products/31_140_xx.htm
Primo 4 Article no. 31.140.XX
Product summaryBasic pack + 3 f-stop power variation + 3 outlets + microprocessor . controlled + proportional modelling light
Product descriptionPower pack with 3 lamp base connections, 3200 J flash energy, three-stop adjustment range (in 1/3-stop intervals) with rotary knob, fast/slow charging mode selector, built-in photocell, proportional modelling light, internal discharge when power setting is reduced.
Scope of deliveryPower pack with power cable, bag with spare fuse, dust cover, instruction manual.
Technical data
Flash energy 3200 J
F-stop at distance of 2 m (6 1/2 ft.),100 ISO, reflector P70
90 1/10
Flash duration t 0.1 (t 0.5)
1 lamp : 1/2602 lamps : 1/4703 lamps : 1/630
Charging time(for 100% of selected energy)*
1.6 - 3.9 sCan be switched to slow charging
http://www.bron.ch/products/31_140_xx.htm (1 van 2) [26-11-2001 08:39:38]
http://www.bron.ch/products/31_140_xx.htm
Ready display Visual and audible (can be inhibited)
Lamp base connections 3
Power distribution Symmetrical
Control range 3 stops, in calibrated 1/3-stop intervals, with rotary switch
Halogen modelling light max. 3 x 650 W, 200-240 Vproportional to flash energy,switch settings: prop1, prop2, off, full
Flash triggering photocell, sync cable, manual release button
Stabilized flash voltage +/- 2%
Standards EC standard 73/23, UL 122
Power requirements 200 - 240 V, 16A100 - 120 V, 16A
Dimensions 305 x 275 x 162 mm
Weight 7.0 kg
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8, Primo A, Primo A fashion, Primo 4,
Flashman 2, 304, 404, 404 Servor
Lamp bases Primo, Pulso 2, F2, 4, F4, Pulso Twin, Hazylight, Universal lamp, Boxlite 30 and 40, Striplite (2 x 3200), Lightbar 60/120, Pulso spot 4, Profil, Pulso 8 with restrictions
AccessoriesInfrared receiver IR receiver Art. no. 36.104.00
Battery converter Art. no. 36.450.XX
Travel bag Primo, empty Art. no. 36.502.00
Special featuresPrimo discharges internally when the power setting is reduced and has an overload circuit breaker. The built-in low-noise cooling fan protects the unit during long shooting sessions.
http://www.bron.ch/products/31_140_xx.htm (2 van 2) [26-11-2001 08:39:38]
http://www.bron.ch/products/31_142_xx.htm
Primo 4 bi-voltage Article no. 31.142.XX
Product summaryBasic pack + 3 f-stop power variation + 3 outlets + microprocessor controlled + proportional modelling light
Product descriptionPower pack with 3 lamp base connections, 3200 J flash energy, three-stop adjustment range (in 1/3-stop intervals) with rotary knob, fast/slow charging mode selector, built-in photocell, proportional modelling light, internal discharge when power setting is reduced, 100/240 V dual voltage unit
Scope of deliveryPower pack with power cable, bag with spare fuse, dust cover, instruction manual.
Technical data
Flash energy 3200 J
F-stop at distance of 2 m (6 1/2 ft.),100 ISO, reflector P70
90 1/10
Flash duration t 0.1 (t 0.5)
1 lamp : 1/2602 lamps : 1/4703 lamps : 1/630
http://www.bron.ch/products/31_142_xx.htm (1 van 2) [26-11-2001 08:39:43]
http://www.bron.ch/products/31_142_xx.htm
Charging time(for 100% of selected energy)*
1.6 - 3.9 sCan be switched to slow charging
Ready display Visual and audible (can be inhibited)
Lamp base connections 3
Power distribution Symmetrical
Control range 3 stops, in calibrated 1/3-stop intervals, with rotary switch
Halogen modelling light max. 3 x 650 W, 200-240 Vmax. 3 x 300 W, 100-120 Vproportional to flash energy,switch settings: prop1, prop2, off, full
Flash triggering photocell, sync cable, manual release button
Stabilized flash voltage +/- 2%
Standards EC standard 73/23, UL 122
Power requirements 200 - 240 V, 16A100 - 120 V, 16A
Dimensions 305 x 275 x 162 mm
Weight 7.3 kg
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8, Primo A, Primo A fashion, Primo 4,
Flashman 2, 304, 404, 404 Servor
Lamp bases Primo, Pulso 2, F2, 4, F4, Pulso Twin, Hazylight, Universal lamp, Boxlite 30 and 40, Striplite (2 x 3200), Lightbar 60/120, Pulso spot 4, Profil, Pulso 8 with restrictions
AccessoriesInfrared receiver IR receiver Art. no. 36.104.00
Battery converter Art. no. 36.450.XX
Travel bag Primo, empty Art. no. 36.502.00
Special featuresPrimo discharges internally when the power setting is reduced and has an overload circuit breaker. The built-in low-noise cooling fan protects the unit during long shooting sessions. Characteristics of the Primo 4 Bi-Voltage 110-220 V unit are optimized for 110 V operation.
http://www.bron.ch/products/31_142_xx.htm (2 van 2) [26-11-2001 08:39:43]
Monobloc
Minipuls C
Minipuls C 40Minipuls C 80Minipuls C 200
Minipuls Kits
Travel KitBasic KitClassic KitExpert KitLocation Kit 2Location Kit 3
Minipuls D
Minipuls D 160Minipuls D 160 plus
http://www.bron.ch/products/monobloc.htm [26-11-2001 08:39:48]
Minipuls C40
Minipuls C40 Article no. 31.430.XX
Product summarySimple to use + lightweight + 3 f-stop power variation + standard broncolor bajonet mount + proportional halogen mod. light + IR triggering
Product descriptionCompact unit with Pulso bayonet, 300 J flash energy, control range 3 f-stops continuous with rotary knob, built-in photocell and infrared receiver (can be switched-off individually), proportional or full modelling light, internal discharge when power setting is reduced, dim-function of the modelling light
Scope of deliveryUnit with power cable and protection cap, instruction manual.Flash tube, modelling light and protecting glass have to be ordered separately.
Technical data
Flash energy 300 J
F-stop at distance of 2 m100 ISO, reflector P50//P70
32 1/2 // 22 1/2
Flash duration t 0.1 (t 0.5)
1/330 - 1/1000 s
Charging time(for 100% of selected energy)*
0.6 - 1.4 s
Ready display visual with two-coloured LED, at 100 % of selected energy
Control range continous 3 f-stops with rotary knob
Halogen modelling light 150 W - 300 W
Flash release wireless via infrared transmitter IRX 2, FCM 2**, FCC**, photocell, sync cable, manual test button
http://www.bron.ch/products/31_430_xx.htm (1 van 3) [26-11-2001 08:39:53]
Minipuls C40
Stabilized flash voltage +/- 1%
Standards SEV, VDE
Power requirements 220-240 V / 50-60 Hz, 6A or110-120 V / 50-60 Hz, 10A or100 V / 50-60 Hz, 15
Cooling fan
Dimensions 120 x 195 x 410 mm
Weight 2.4 kg
* Measured with 220 V / 50 Hz, resp. 120 V / 60 Hz, resp. 100 V / 50Hz.
** From year of production 1995, serial number begins with C (=compatible with Minipuls C), recommended for smaller rooms only.
*** The units work only with one voltage and are not switchable. However the version 220-240 V works with the following restrictions to 120 V / 60 Hz: A modelling light 120 V/150 W has to be applied, the charging time increases to 3s).
CompatibilityIR-triggering IRX, IRX 2, IRS-E
(Note: IRI and IRS can not be used due to the changed triggering-frequency of the Minipuls C.FCC**, FCM 2** (channel "9" see operating instructions FCM 2). The infrared triggering is guaranteed only with produced after 1/95, (serial number begins with C).
Power packs Grafit, Pulso, Opus, Primo, Flashman, Flashman 2, 304, 404, 404 Servor
Compact units Minipuls C80, C200, Minipuls**** 40, 80, Compuls 65, 95, 165
Battery options The units 200-240 V can be operated without modelling light by means of a converter from a car battery.
**** For IR-triggering the photocell has to be switched on as well.
Accessories
Minipuls Expert Kit C 5500 K Art. no. 31.464.XX
Minipuls Classic Kit C 5500 K Art. no. 31.461.XX
Minipuls Travel Kit C 5500 K Art. no. 31.467.XX
Flash tube 5500K to Minipuls C40/C80 Art. no. 34.309.55
Halogen modelling light (300 W/230 V) Art. no. 34.231.XX
Halogen modelling light (300 W/120 V) Art. no. 34.225.XX
http://www.bron.ch/products/31_430_xx.htm (2 van 3) [26-11-2001 08:39:53]
Minipuls C40
Halogen modelling light (150 W/230 V) Art. no. 34.250.XX
Halogen modelling light (150 W/120 V) Art. no. 34.251.XX
Protecting glass, clear Art. no. 34.325.59
Fuse 3.15 AF Art. no. 37137.00
Transport protection cap, grey Art. no. Z3620.00
Mains cable Europe 200-240 V Art. no. 39086.00
Mains cable CH 200-240 V Art. no. 39084.00
Mains cable USA 100-120 V Art. no. 39085.00
12 V car battery converter 220 V Art. no. 36.450.XX
Special featuresThe flash tubes of the new Minipuls C are larger than those of the former Minipuls 40/80 units and correspond to the dimensions of the Pulso-tubes. For this reason the light angle with a P70 is larger and the f-stop smaller. In order to reach comparable datas with the Minipuls C as with the older Minipuls 40/80, the measurement must be made with a P50. For this reason both reflector-dates were indicated in the technical datas.
http://www.bron.ch/products/31_430_xx.htm (3 van 3) [26-11-2001 08:39:53]
Minipuls C80
Minipuls C80 Article no. 31.440.XX
Product summarySimple to use + lightweight + 3 f-stop power variation + standard broncolor bajonet mount + proportional halogen mod. light + IR triggering
Product descriptionCompact unit with Pulso bayonet, 600 J flash energy, control range 3 f-stops continuous with rotary knob, built-in photocell and infrared receiver (can be switched-off individually), proportional or full modelling light, internal discharge when power setting is reduced, dim-function of the modelling light
Scope of deliveryUnit with power cable and protection cap, instruction manual.Flash tube, modelling light and protecting glass have to be ordered separately.
Technical data
Flash energy 600 J
F-stop at distance of 2 m100 ISO, reflector P50//P70
45 1/2 // 32 1/2
Flash duration t 0.1 (t 0.5)
1/200 - 1/600 s
Charging time(for 100% of selected energy)*
0.7 - 1.9 s
Ready display visual with two-coloured LED, at 100 % of selected energy
Control range continous 3 f-stops with rotary knob
Halogen modelling light 150 W - 300 W
http://www.bron.ch/products/31_440_xx.htm (1 van 3) [26-11-2001 08:39:58]
Minipuls C80
Flash release wireless via infrared transmitter IRX 2, FCM 2**, FCC**, photocell, sync cable, manual test button
Stabilized flash voltage +/- 1%
Standards SEV, VDE
Power requirements 220-240 V / 50-60 Hz, 6A or110-120 V / 50-60 Hz, 10A or100 V / 50-60 Hz, 15
Cooling fan
Dimensions 120 x 195 x 410 mm
Weight 2.7 kg
* Measured with 220 V / 50 Hz, resp. 120 V / 60 Hz, resp. 100 V / 50 Hz.
** From year of production 1995, serial number begins with C (= compatible with Minipuls C), recommended for smaller rooms only.
*** The units work only with one voltage and are not switchable.However the version 220-240 V works with the following restrictions to 120 V / 60 Hz: A modelling light 120 V/150 W has to be applied, the charging time increases to 5.5s).
CompatibilityIR-triggering IRX, IRX 2, IRS-E
(Note: IRI and IRS can not be used due to the changed triggering-frequency of the Minipuls C.FCC**, FCM 2** (channel "9" see operating instructions FCM 2). The infrared triggering is guaranteed only with produced after 1/95, (serial number begins with C).
Power packs Grafit, Pulso, Opus, Primo, Flashman, Flashman 2, 304, 404, 404 Servor
Compact units Minipuls C80, C200, Minipuls**** 40, 80, Compuls 65, 95, 165
Battery options The units 200-240 V can be operated without modelling light by means of a converter from a car battery.
**** For IR-triggering the photocell has to be switched on as well.
Accessories
Minipuls Expert Kit C 5500 K Art. no. 31.464.XX
Minipuls Classic Kit C 5500 K Art. no. 31.461.XX
Minipuls Travel Kit C 5500 K Art. no. 31.467.XX
Flash tube 5500K to Minipuls C40/C80 Art. no. 34.309.55
http://www.bron.ch/products/31_440_xx.htm (2 van 3) [26-11-2001 08:39:58]
Minipuls C80
Halogen modelling light (300 W/230 V) Art. no. 34.231.XX
Halogen modelling light (300 W/120 V) Art. no. 34.225.XX
Halogen modelling light (150 W/230 V) Art. no. 34.250.XX
Halogen modelling light (150 W/120 V) Art. no. 34.251.XX
Protecting glass, clear Art. no. 34.325.59
Fuse 3.15 AF Art. no. 37137.00
Transport protection cap, grey Art. no. Z3620.00
Mains cable Europe 200-240 V Art. no. 39086.00
Mains cable CH 200-240 V Art. no. 39084.00
Mains cable USA 100-120 V Art. no. 39085.00
12 V car battery converter 220 V Art. no. 36.450.XX
Special featuresThe flash tubes of the new Minipuls C are larger than those of the former Minipuls 40/80 units and correspond to the dimensions of the Pulso-tubes. For this reason the light angle with a P70 is larger and the f-stop smaller. In order to reach comparable datas with the Minipuls C as with the older Minipuls 40/80, the measurement must be made with a P50. For this reason both reflector-dates were indicated in the technical datas.
http://www.bron.ch/products/31_440_xx.htm (3 van 3) [26-11-2001 08:39:58]
Minipuls C200
Minipuls C200 Article no. 31.450.XX
Product summarySimple to use + high power + lightweight + 4 f-stop power variation + standard broncolor bajonet mount + proportional halogen mod. light + IR triggering
Product descriptionCompact unit with Pulso bayonet, 1500 J flash energy, control range 4 f-stops continuous with rotary knob, built-in photocell and infrared receiver (can be switched-off individually), proportional or full modelling light, internal discharge when power setting is reduced, dim-function of the modelling light
Scope of deliveryUnit with power cable and protection cap, instruction manual.Flash tube, modelling light and protecting glass have to be ordered separately.
Technical data
Flash energy 1500 J
F-stop at distance of 2 m100 ISO, reflector P50//P70
90 // 64
Flash duration t 0.1 (t 0.5)
1/250 (1/1000 s)
Charging time(for 100% of selected energy)*
0.6 - 2.4 s
Ready display visual with two-coloured LED, at 100 % of selected energy
Control range continous 4 f-stops with rotary knob
Halogen modelling light 300 W - 650 W with 220 - 240 V150 W - 300 W with 110 - 120 V
http://www.bron.ch/products/31_450_xx.htm (1 van 3) [26-11-2001 08:40:03]
Minipuls C200
Flash release wireless via infrared transmitter IRX 2, FCM 2**, FCC**, photocell, sync cable, manual test button
Stabilized flash voltage +/- 1%
Standards SEV, VDE
Power requirements 220-240 V / 50-60 Hz, 10A or110-120 V / 50-60 Hz, 16A or100 V version not available
Cooling fan
Dimensions 120 x 195 x 495 mm
Weight 4.5 kg
* Measured with 220 V / 50 Hz, resp. 120 V / 60 Hz
** From year of production 1995, serial number begins with C (= compatible with Minipuls C), recommended for smaller rooms only.
*** the units work only with one voltage and are not switchable. However, the version 220-240 V works with the following restrictions to 120 V / 60 Hz: A modelling light 120 V / 150 W has to be applied, the charging time increases to 6.9 s.
CompatibilityIR-triggering IRX 2, IRS-E
(Note: IRI and IRS can not be used due to the changed triggering-frequency of the Minipuls C.FCC**, FCM 2** (channel "9" see operating instructions FCM 2). The infrared triggering is guaranteed only with meters produced after 1/95, (serial number begins with C).
Power packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Pulso 2, A2, 4, A4, 8, Opus 2, A2, 4, A4, A8, Primo, A, Primo A fashion, Primo 4, Flashman, Flashman 2, 304, 404, 404 Servor
Compact units Minipuls C40, C80, Minipuls**** 40, 80, Compuls 65, 95, 165
Battery options The units 200-240 V can be operated without modelling light by means of a converter from a car battery.
**** For IR-triggering the photocell has to be switched on as well.
Accessories
Minipuls Location Kit 2 C 5100 K Art. no. 31.453.XX
Minipuls Location Kit 2 C 5500 K Art. no. 31.454.XX
Minipuls Location Kit 3 C 5100 K Art. no. 31.455.XX
Minipuls Location Kit 3 C 5500 K Art. no. 31.456.XX
http://www.bron.ch/products/31_450_xx.htm (2 van 3) [26-11-2001 08:40:03]
Minipuls C200
Flash tube 5100K to Minipuls C200 Art. no. 34.310.51
Flash tube 5500K to Minipuls C200 Art. no. 34.310.55
Halogen modelling light (300 W/120 V) Art. no. 34.225.XX
Halogen modelling light (350 W/240 V) Art. no. 34.226.XX
Protecting glass, clear Art. no. 34.325.59
Fuse 3.15 AF Art. no. 37137.00
Transport protection cap, grey Art. no. Z3620.00
Mains cable Europe 200-240 V Art. no. 39086.00
Mains cable CH 200-240 V Art. no. 39084.00
Mains cable USA 100-120 V Art. no. 39085.00
12 V car battery converter Art. no. 36.450.XX
http://www.bron.ch/products/31_450_xx.htm (3 van 3) [26-11-2001 08:40:03]
http://www.bron.ch/products/31_467_xx.htm
MinipulsTravel Kit C
Article no. 31.467.XX
Product summarySeveral kits available + 2 or 3 units + umbrellas + softboxes + travel case + for all applications
Comprises:
2 Minipuls C40 incl. flash tubes, modelling lamps and protecting glasses
2 P-Travel reflectors
1 barn door P-Travel
1 synchronous cable, 5 m (16 ft.)
1 travel bag
1 stand bag
2 stands
http://www.bron.ch/products/31_467_xx.htm [26-11-2001 08:40:09]
http://www.bron.ch/products/31_468_xx.html
MinipulsBasic Kit C
Article no. 31.468.XX
Consisting of:
1 Minipuls C80 incl. flash tube, modelling lamp, protecting glass and grey transport protection cap, main cable
1 P-Travel reflector
1 umbrella reflector
1 umbrella white
1 sync cable, 5 m (16 ft.)
1 bag
1 stand
http://www.bron.ch/products/31_468_xx.html [26-11-2001 08:40:13]
Minipuls Classic Kit C
MinipulsClassic Kit C
Article no. 31.461.XX
Product summarySeveral kits available + 2 or 3 units + umbrellas + softboxes + travel case + for all applications
Comprises:
1 Minipuls C80 incl. flash tube, modelling lamp and protecting glass
2 Minipuls C40 incl. flash tubes, modelling lamps and protecting glasses
2 P-Travel reflectors
1 barn door to P-Travel
1 Pulsoflex C 60 x 100
1 synchronous cable, 5 m (16 ft.)
http://www.bron.ch/products/31_461_xx.htm (1 van 2) [26-11-2001 08:40:20]
Minipuls Classic Kit C
1 travel bag
1 stand bag
3 stands
http://www.bron.ch/products/31_461_xx.htm (2 van 2) [26-11-2001 08:40:20]
Minipuls Expert Kit C
MinipulsExpert Kit C
Article no. 31.464.XX
Product summarySeveral kits available + 2 or 3 units + umbrellas + softboxes + travel case + for all applications
Comprises:
3 Minipuls C80 incl. flash tubes, modelling lamps and protecting glasses
2 P-Travel reflectors
1 barn door to P-Travel
1 umbrella reflector
1 umbrella silver
1 Pulsoflex C 60 x 100
http://www.bron.ch/products/31_464_xx.htm (1 van 2) [26-11-2001 08:40:28]
Minipuls Expert Kit C
1 IRX 2
1 travel bag
1 stand bag
3 stands
http://www.bron.ch/products/31_464_xx.htm (2 van 2) [26-11-2001 08:40:28]
Minipuls Location Kit 2
MinipulsLocation Kit 2
Article no. 31.454.XX
Product summarySeveral kits available + 2 or 3 units + umbrellas + softboxes + travel case + for all applications
Comprises:2 Minipuls C200 incl. flash tubes, modelling lamps, protecting glasses and grey protection caps
2 P-Travel reflectors
1 synchronous cable, 10 m (32 ft.)
1 travel bag
1 stand bag
2 stands
http://www.bron.ch/products/31_454_xx.htm [26-11-2001 08:40:35]
Minipuls Location Kit 3
MinipulsLocation Kit 3
Article no. 31.456.XX
Product summarySeveral kits available + 2 or 3 units + umbrellas + softboxes + travel case + for all applications
Comprises:
3 Minipuls C200 incl. flash tubes, modelling lamps, protecting glasses and grey protection caps
1 P-Travel reflectors
1 barn door to P-Travel
1 umbrella reflector
1 umbrella silver
1 Pulsoflex C 60 x 100
1 IRX 2
1 travel bag
http://www.bron.ch/products/31_456_xx.htm (1 van 2) [26-11-2001 08:40:43]
Minipuls Location Kit 3
1 stand bag
3 stands
http://www.bron.ch/products/31_456_xx.htm (2 van 2) [26-11-2001 08:40:43]
Minipuls D160
Minipuls D160 Article no. 31.470.XX
Product designationMinipuls D160 Article no. 31.470.XX
Product descriptionPowerful compact unit with interlocking Pulso bayonet, 1200 J flash energy (Japanese version 1000 J), control range 5 f-stops in 1/10 f-stop intervals, selectable photocell, high repetitive accuracy for digital imaging, 2-channel infrared receiver for flash release (can be switched off separately), IR remote control of all important functions with Servor e, modelling light with 6 different proportional levels suitable to all broncolor power packs and compact units, illuminated digital display on the front panel and on both sides, illuminated keyboard, internal discharge when power setting is reduced, dim-function of the modelling light during charging, can be controlled by means of Interface (accessories) from PC/MAC, audible ready buzzer can be switched off, automatic adaptation to the available power (230 V-120 V resp. 200 V-100 V Japanese version).
Additional functions: flash delay and flash sequences, fan cooling for long flash sequences, robust metal housing with integrated umbrella mounting, big handle, thermal circuit breaker.
Scope of deliveryUnit with mains cable and protection cap, operating instructions.Flash tube, modelling lamp and protecting glass have to be ordered separately.
Technical data
Flash energy 1200 J (Japanese version 1000 J)
http://www.bron.ch/products/31_470_xx.htm (1 van 5) [26-11-2001 08:40:48]
Minipuls D160
F-stop at 2 m 100 ISO, P50//P70
64 7/10 // 45 7/10
Flash duration t 0.1 (t 0.5) 1/250 s (1/1000 s)
Charging time (for 100% of selected energy)
230 V / 50 Hz: 120 V / 60 Hz: 0,5 - 2,2 s
Japanese version: 0,7 - 3,2 sCan be switched to slow charging mode 0,4 - 1,8 s
Ready display Visual with LED and audible (can be switched off); signals when 100 % of selected energy is reached
Control range 5 f-stops in 1/10 f-stop intervals
Modelling light halogen 650 W with 200-240 Vhalogen 300 W with 100-120 V
Flash release selectable photocell, synchronous cable (2 connections), manual release button, wireless via infrared transmitter IRX 2, IRQ, FCM 2, FCC
Stabilized flash voltage +/- 0,5%
Standards 73/23/CEE and 89/336/CEE
http://www.bron.ch/products/31_470_xx.htm (2 van 5) [26-11-2001 08:40:48]
Minipuls D160
Power requirements Europe/USA: 220 V-240 V, 50 Hz, 10 A and 10 V-120 V, 60 Hz, 16 A
Japanese: 100 V, 50 Hz, 16 A and200 V, 50 Hz, 10 A
Cooling fan
Dimensions 495x120x195 mm
Weight 4,5 kg
Compatibility
IR triggering IRX 2, IRQ, FCC, FCM 2, Servor e
Power packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Mobil, Pulso 2, A2, 4, A4, 8, Opus 2, A2, 4, A4, A8, Primo, Primo A, Primo A fashion, Primo 4, Flashman, Flashman 2, 304, 404, 404 Servor
Compact units Minipuls C40, C80, C200, Minipuls 40, 80, Compuls 65, 95, 165
Battery operation The units can be operated without modelling light by means of a converter from a car battery.
http://www.bron.ch/products/31_470_xx.htm (3 van 5) [26-11-2001 08:40:48]
Minipuls D160
Accessories
Interface Minipuls D160 plus Art. no. 36.118.00
Flash tube 5500 K to Minipuls D160 / C200 Art. no. 34.310.55
Halogen modelling light 300 W / 120 V Art. no. 34.225.XX
Halogen modelling light 650 W / 240 V Art. no. 34.226.XX
Protecting glass, clear Art. no. 34.325.59
Fuse 3.15 AF Art. no. 37137.00
Transport protection cap, grey Art. no. Z3620.00
Mains cable Europe 200-240 V Art. no. 39086.00
Mains cable CH 200-240 V Art. no. 39084.00
Mains cable USA 100-120 V Art. no. 39085.00
12 V battery converter Art. no. 36.450.XX
http://www.bron.ch/products/31_470_xx.htm (4 van 5) [26-11-2001 08:40:48]
Minipuls D160
Bracket for suspended mounting Art. no. 35.228.00
http://www.bron.ch/products/31_470_xx.htm (5 van 5) [26-11-2001 08:40:48]
Minipuls D160 plus
Minipuls D160 plus Article no. 31.471.XX
Product designationMinipuls D160 plus Article no. 31.471.XX
Product descriptionPowerful compact unit with interlocking Pulso bayonet, 1200 J flash energy (Japanese version 1000 J), control range 5 f-stops in 1/10 f-stop intervals, selectable photocell, high repetitive accuracy for digital imaging, 2-channel infrared receiver for flash release (can be switched off separately), IR remote control of all important functions with Servor e, modelling light with 6 different proportional levels suitable to all broncolor power packs and compact units, illuminated digital display on the front panel and on both sides, illuminated keyboard, internal discharge when power setting is reduced, dim-function of the modelling light during charging, can be controlled by means of Interface (accessories) from PC/MAC, audible ready buzzer can be switched off, automatic adaptation to the available power (230 V-120 V resp. 200 V-100 V Japanese version).Additional functions: flash delay and flash sequences, fan cooling for long flash sequences, robust metal housing with integrated umbrella mounting, big handle, thermal circuit breaker.
Minipuls D160 plus additionsAll functions of the unit can be controlled directly with the PC or Mac via the built-in interface. When using the monitor you have the possibility to store the lighting situations in 4 memories. In addition every unit can be identified and described with an address for the lighting function.
Scope of deliveryUnit with built-in interface, adapter cable, diskette with software, mains cable, operating instructions.Flash tube, modelling lamp and protecting glass have to be ordered separately.
Technical data
Flash energy 1200 J (Japanese version 1000 J)
http://www.bron.ch/products/31_471_xx.htm (1 van 5) [26-11-2001 08:40:52]
Minipuls D160 plus
F-stop at 2 m 100 ISO, P50//P70
64 7/10 // 45 7/10
Flash duration t 0.1 (t 0.5) 1/250 s (1/1000 s)
Charging time (for 100% of selected energy)
230 V / 50 Hz: 120 V / 60 Hz: 0,5 - 2,2 s
Japanese version: 0,7 - 3,2 sCan be switched to slow charging mode 0,4 - 1,8 s
Ready display Visual with LED and audible (can be switched off); signals when 100 % of selected energy is reached
Control range 5 f-stops in 1/10 f-stop intervals
Modelling light halogen 650 W with 200-240 Vhalogen 300 W with 100-120 V
Flash release selectable photocell, synchronous cable (2 connections), manual release button, wireless via infrared transmitter IRX 2, IRQ, FCM 2, FCC
Stabilized flash voltage +/- 0,5%
Standards 73/23/CEE and 89/336/CEE
http://www.bron.ch/products/31_471_xx.htm (2 van 5) [26-11-2001 08:40:52]
Minipuls D160 plus
Power requirements Europe/USA: 220 V-240 V, 50 Hz, 10 A and 10 V-120 V, 60 Hz, 16 A
Japanese: 100 V, 50 Hz, 16 A and200 V, 50 Hz, 10 A
Cooling fan
Dimensions 495x120x195 mm
Weight 4,5 kg
Compatibility
IR triggering IRX 2, IRQ, FCC, FCM 2, Servor e
Power packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Mobil, Pulso 2, A2, 4, A4, 8, Opus 2, A2, 4, A4, A8, Primo, Primo A, Primo A fashion, Primo 4, Flashman, Flashman 2, 304, 404, 404 Servor
Compact units Minipuls C40, C80, C200, Minipuls 40, 80, Compuls 65, 95, 165
Battery operation The units can be operated without modelling light by means of a converter from a car battery.
http://www.bron.ch/products/31_471_xx.htm (3 van 5) [26-11-2001 08:40:52]
Minipuls D160 plus
Accessories
Interface Minipuls D160 plus Art. no. 36.118.00
Flash tube 5500 K to Minipuls D160 / C200 Art. no. 34.310.55
Halogen modelling light 300 W / 120 V Art. no. 34.225.XX
Halogen modelling light 650 W / 240 V Art. no. 34.226.XX
Protecting glass, clear Art. no. 34.325.59
Fuse 3.15 AF Art. no. 37137.00
Transport protection cap, grey Art. no. Z3620.00
Mains cable Europe 200-240 V Art. no. 39086.00
Mains cable CH 200-240 V Art. no. 39084.00
Mains cable USA 100-120 V Art. no. 39085.00
12 V battery converter Art. no. 36.450.XX
http://www.bron.ch/products/31_471_xx.htm (4 van 5) [26-11-2001 08:40:52]
Minipuls D160 plus
Bracket for suspended mounting Art. no. 35.228.00
http://www.bron.ch/products/31_471_xx.htm (5 van 5) [26-11-2001 08:40:52]
Products
Power packs
● Grafit● Topas ● Mobil● Primo
Monoblocs
● Minipuls C ● Minipuls D● Minipuls Kits
Basic lamp bases
● Mobilite ● Picolite ● Primo● Pulso F2/F4 ● Pulso Twin
Special lamp bases
● Fibrolite● Following spot "Profil 11/26"● Pulso Spot 4● Ringflash
Area lights
● Balloon● Boxlite 40 ● Cumulite 2● Hazylight 2● Hazylight Soft● Lightbar 60/120● Megaflex● Megalite● Mini-Cumulite● Mini-Hazylight● Pulsoflex C/EM● Satellite Staro ● Striplite 60/120
Reflectors and attachments
● Conical snoot● Flooter S● Fresnel spot attachment● Fresnel spot attachment to Picolite and Mobilite ● Optical Snoot to Pulso Spot 4● Projection attachment to Picolite● P 45 ● P 50 ● P 65 ● P 70 ● P 120 ● P-Soft ● P-Travel
http://www.bron.ch/products/main00.html (1 van 3) [26-11-2001 08:40:58]
Products
● Umbrella ● Satellite evolution ● Spot attachment ● Sunlite Set
Remote control
● Infrared transmitter IRQ ● Infrared transmitter IRX 2 ● Remote control Servor 3● Remote control Servor d
Measuring instruments
● Colormeter FCC● Flashmeter FCM 2
Stands
● broncolor pillar stand 215● Compuls AC● Flamingo● Hazylight● Junior AC ● Mini Flamingo● Senior AC ● Stand adapters ● Super-boom ● Twin articulated arm
Various
● Ceiling rail system
http://www.bron.ch/products/main00.html (2 van 3) [26-11-2001 08:40:58]
Products
Continuous light
● HMI 575, ballast unit ● HMI 1200, ballast unit ● HMI F575, lamp base ● HMI F1200, lamp base
Continuous light accessories
● Area lights to HMI F575 ● Folding refl. to HMI F575 ● Folding refl. to HMI F1200 ● Reflectors to HMI F575 ● Various acces. to HMI F575 ● Various acces. to HMI F1200
http://www.bron.ch/products/main00.html (3 van 3) [26-11-2001 08:40:58]
Mobilite small lamp
Mobilite small lamp Article no. 32.010.00
Product designationMobilite small lamp , Article no. 32.010.00
Product descriptionLamp with built-in reflector and modelling lamp 12 V / 50 W to the battery-operated power pack Mobil. Plug-in flash tube with spring fastener. Small dimensions and little weight for mobile work. Large light angle. Own accessories with small dimensions. Using the Pulso adapter, lightweight reflectors and accessories from the Pulso assortment may be applied. Switch and fuse for modelling lamp. Built-in tilt head with adjustable lever and umbrella holder. Fan for long series of flashes. Thermal protection. UV-coated protecting glass. Handle. Compatible with the entire broncolor power pack range (without modelling lamp). Max. 1600 J.
Scope of deliveryLamp without flash tube, modelling lamp, protecting glass
Technical data
Flash energy max. 1600 J
f-stop at 2 m (6 ft.) distance, 100 ISO 1200 J : 22 4/10 with lamp angle 130°1600 J : 22 9/10 with lamp angle 130°
Modelling light (fuse value) 12 V / 50 W Halogen (5 AF)
Length of cable 3.5 m (11.4 ft.)
http://www.bron.ch/products/32_010_00.htm (1 van 3) [26-11-2001 08:41:02]
Mobilite small lamp
Cooling fan 12 V, only switches on when necessary
Dimensions overall 205x135 mm, diameter 80 mm
Weight with cable 1.25 kg
Stand adapter for bolts broncolor and Manfrotto 16 mm
Accessories
Attachment with 3 honeycomb grids and 2 aperture plates to Mobilite and Picolite art. no. 33.204.00
Barn door with 4 wings to Mobilite and Picolite art. no. 33.244.00
Pulso adapter to Mobilite and Picolite art. no. 33.501.00
Fresnel spot attachment to Picolite and Mobilite, Light angle adjustment range 15-35° art. no. 33.631.00
Picolite/Mobilite bracket to Satellite Evolution art. no. 35.214.00
Lamp extension cable 3.5 m to Mobilite art. no. 34.150.00
Halogen modelling lamp 12 V / 50 W to Mobilite art. no. 34.200.00
Flash tube 1600 J without UV-coating to Mobilite and Picolite art. no. 34.308.00
Protecting glass 5500 K to Mobilite and Picolite art. no. 34.332.55
Compatibility
Power packs Mobil, Grafit 2, 4, A2, A4, A2 plus, A4 plus, Primo, Primo A, Primo A fashion, Primo 4, Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8,Flashman, Flashman 2, 304, 404, 404 Servor
http://www.bron.ch/products/32_010_00.htm (2 van 3) [26-11-2001 08:41:02]
Mobilite small lamp
Pulso accessories(with help of adapter)
P70, P65, P50, P45, P120, P-Travel, conical snoot, P-soft, Mini-Hazylight, Mini-Cumulite, Cumulite 2, Megaflex, Flooter S, Pulsoflex up to 80x80 cm
Flash tubes and protecting glasses Flash tubes clear 1600 J art. no. 34.308.00Protecting glass 5500 K art. no. 34.332.55matt 5500 K art. no. 34.335.55
Special featuresa. For safety reasons, never operate the lamps without the protecting glass in place.b. The accessories are identical with those of the small lamp Picolite.c. For thermal reasons the UV-coating is applied to the protecting glass.
http://www.bron.ch/products/32_010_00.htm (3 van 3) [26-11-2001 08:41:02]
http://www.bron.ch/products/32_020_00.htm
Picolite small lamp Article no. 32.020.00
Product designationPicolite small lamp, Article no. 32.020.00
Product descriptionSmall lamp with built-in reflector. Small dimensions and little weight for tabletop and mobile work. Plug-in flash tube with spring fastener. Own accessories with small dimensions. Using the Pulso adapter, lightweight reflectors and accessories from the Pulso assortment may be applied. Switch and fuse for modelling lamp. Built-in tilt head with adjustable lever and umbrella holder. Fan for long series of flashes. Suitable for use with 100 V - 240 V voltages due to the stabilized supply voltage for the cooling fan. Thermal protection. UV-coated protecting glass. Handle. Max. 1600 J. Compatible with the battery-operated power pack Mobil (without modelling light when operating with battery).
Scope of deliveryLamp without flash tube, modelling lamp, protecting glass
Technical data
Flash energy max. 1600 J
f-stop at 2m (6 ft.) distance, 100 ISO 1200 J: 22 4/10 with lamp angle 130°1600 J: 22 9/10 with lamp angle 130°
Modelling light (fuse value) 150 W Halogen (3.15 AF)
Length of cable 3.5 m (11.4 ft.)
http://www.bron.ch/products/32_020_00.htm (1 van 3) [26-11-2001 08:41:07]
http://www.bron.ch/products/32_020_00.htm
Cooling fan stabilized
Dimensions overall 205x135 mm, diameter 80 mm
Weight with cable 1.25 kg
Stand adapter for bolts broncolor and Manfrotto 16 mm
Accessories
Attachment with 3 honeycomb grids and 2 aperture plates to Mobilite and Picolite art. no. 33.204.00
Barn door with 4 wings to Mobilite and Picolite art. no. 33.244.00
Pulso adapter to Mobilite and Picolite art. no. 33.501.00
Fresnel spot attachment to Picolite and Mobilite, Light angle adjustment range 15-35° art. no. 33.631.00
Projection attachment to Picolite, 100 mm with matt protecting glass, 3 slide-in aperture plates, 1 gobo holder art. no. 33.641.00
Picolite/Mobilite bracket to Satellite Evolution art. no. 35.214.00
Halogen modelling lamp 230 V / 150 W to Picolite art. no. 34.201.00
Halogen modelling lamp 120 V / 150 W to Picolite art. no. 34.202.00
Flash tube 1600 J without UV-coating to Mobilite and Picolite art. no. 34.308.00
Protecting glass 5500 K to Mobilite and Picolite art. no. 34.332.55
Compatibility
Power packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Mobil,Primo, Primo A, Primo A fashion, Primo 4,Pulso 2, A2, 4, A4,Opus 2, A2, 4, A4, A8,Flashman, Flashman 2, 304, 404, 404 Servor
http://www.bron.ch/products/32_020_00.htm (2 van 3) [26-11-2001 08:41:07]
http://www.bron.ch/products/32_020_00.htm
Pulso accessories(with help of adapter)
P70, P65, P50, P45, P120, P-Travel, Conical snoot, P-soft, Mini-Hazylight, Mini-Cumulite, Cumulite 2, Megaflex, Flooter S, Pulsoflex up to 80x80 cm
Flash tube and protecting glasses Flash tube clear 1600 J art. no. 34.308.00Protecting glass 5500 K art. no. 34.332.55matt 5500 K art. no. 34.335.55
Special featuresa. For safety reasons, never operate the lamps without the protecting glass in place.b. The accessories are identical with those of the Mobilite.c. For thermal reasons the UV-coating is applied to the protecting glass.
http://www.bron.ch/products/32_020_00.htm (3 van 3) [26-11-2001 08:41:07]
Primo
Primo Article no. 32.111.XX(100-120 V countries)
Article no. 32.111.XX(200-240 V countries)
Product summarySmall lamp base + broncolor standard bayonet mount + halogen mod. light + fan cooled + thermo switch + protective cover + can be used for 230V and 120V
Product descriptionLamp base with Pulso bayonet mount for interchangeable reflectors and various large-area reflectors (softboxes). Plug-in flash tube with retainer spring (The Primo lamp can be fitted with either 1600 J or 3200 J Primo flash tubes. For details see under "special features"). Modelling light switch and fuse. Interchangeable tilt head with one-hand adjustment handle for lightstand or ceiling mount, with built-in umbrella holder. Cooling fan for long shooting sessions. The two voltage versions have different modelling light sockets and can be operated on both voltages by using the corresponding modelling lamp
Scope of deliveryLight, interchangeable tilt head with one-hand adjustment handle and built-in umbrella holder, grey transport protection cap, bag with spare fuse, safety screw for suspension mounting.
Flash tube, modelling lamp and protecting glass must be ordered separately.
Technical data
http://www.bron.ch/products/32_111_xx.htm (1 van 3) [26-11-2001 08:41:12]
Primo
Flash energy 1600J resp. 3200 JStop at 2m distance100 ISO reflector P70
64 2/10 resp 90 2/10 (with Grafit)
Modelling light for 32.111.XX(100-120 V countries)
250 W halogen 100-120 V 34.221.XX500 W halogen 200-240 V 34.230.XXModelling light socket: E11
Modelling light for 32.111.XX(200-240 V countries)
650 W halogen 200-240 V 34.226.10300 W halogen 100-120 V 34.225.XXModelling light socket: 2 x 6.35
Cable length 4mCooling 100-240 V fanWeight 2.2 kgDimensions 131 x 147 x 141 mm
CompatibilityPower Packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Primo, Primo A, Primo A fashion, Primo 4, Grafit 2, 4,
A2, A4, A2 plus, A4 plus Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8, Flashman, Flashman 2, 304, 404, 404 Servor
Reflectors P70 (standard reflector), P65, P50, P45, P120, conical snoot, Softlight reflector P, Mini-Hazylight, Mini-Cumulite, Cumulite 2, Megaflex, Flooter S, Pulsoflex, fresnel and spot attachment, umbrellas
Flash tubes and protection glassesFlash tube UVE 5500K 1600J Art. no. 34.311.55
http://www.bron.ch/products/32_111_xx.htm (2 van 3) [26-11-2001 08:41:12]
Primo
Clear 5900K 1600J Art. no. 34.311.59Protecting glass UVE 5500K Art. no. 34.325.55
Clear 5900K Art. no. 34.325.59UVE mat 5500K Art. no. 34.326.55Clear mat 5900K Art. no. 34.326.59
Special featuresThe maximum capacity of flash tubes available for the Primo lamp base is 1600 J resp. 3200 J. Attached to each flash tube there is a sticker with the inscription "max. 1600 J" resp. "3200 J" which is to be placed onto the blue space on the lamp plug. The Primo lamp must not be charged with a higher value than indicated on this sticker.
Both voltage versions (110 V and 220 V) can be operated at the other vol-tage by replacing the halogen lamp. The only difference between the two versions is the standard modelling light socket.
For price reason, the UV filter coating on the Primo lamp base has been applied directly onto the flash tube for 1600 J. The clear protecting glass does not have any optical effect. The UV filter coating on the 3200 J flash tube for thermal reason has been applied onto the protecting glass. If a uniform fitting of all lamp base types is intended, the Primo lamp base may be fitted with clear flash tube 1600 J and coated protecting glass as well.
Note: For safety reasons the lamp must not be operated without protecting glass.
http://www.bron.ch/products/32_111_xx.htm (3 van 3) [26-11-2001 08:41:12]
Pulso F2 / Pulso F4
Pulso F2Pulso F4
Article no. 32.125.XXArticle no. 32.126.XX
Product summaryFocussable lamp base + broncolor standard bayonet mount + halogen mod. light + fan cooled + thermo switch + protective cover
Product descriptionLamp base with sturdy Noryl housing, bayonet mount with automatic lock for interchangeable reflectors and various softboxes, plug-in flash tube with ceramic base and spring for secure hold and protecting glass, switch and fuse for modelling light, integrated tilt mechanism for continuous tilting, for stand or suspension mounting. Light angle may be adjusted by a rotary knob fitted to side. Focus possible within 26 mm range, resulting in illumination angle adjustment from 60 - 90ƒ (P70). With handle and integrated umbrella holder for rapid replacement of umbrella.
Scope of deliveryIntegrated tilt mechanism/rapid replacement hold, protection cap, cable 5 m, cooling fan, pocket with replacement fuse, safety bolt for suspension mounting, with handle and umbrella bracket. Flash tube, modelling light and protecting glass to be ordered separately.
Technical dataMaximum permissible
Pulso lamp base F2 1600 JPulso lamp base F4 3200 J
Modelling light Halogen, 650 W at 223/240 VHalogen, 250 W at 120 V
http://www.bron.ch/products/32_125_xx.htm (1 van 3) [26-11-2001 08:41:17]
Pulso F2 / Pulso F4
Lenght of cable 5 mCooling fanDimensions 296 x 120 x 198 mmDiameter holding bolt
12 mm, 3/8" thread
CompatibilityPulso F2lamp base
Grafit 2, 4, A2, A4, A2 plus, A4 plus, Flashman, Flashman 2, Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8, Primo, Primo A, Primo A fashion, Primo 4, 304, 404, 404 Servor
Pulso F4lamp base
Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8, Primo, Primo A, Primo A fashion, Primo 4, 304, 404, 404 Servor
AccessoriesP70 (standard reflectors), P65, P45, P120, P-Travel, conical snoot, softlight, universal light accessories with adapter may be used. Hazylight Soft, Mini-Hazylight, Mini-Cumulite, Flooter S, Pulsoflex, Fresnel and projection adapter, Megaflex, Satellite, umbrellas. Travel case for 3 lamp bases. Extension cable 5 m/10 m
Flash tubes and protection glassesPulso lamp base F2 Flash tube 1600 J UVE 5500 K1600 J clear 5900 KProtecting glass clear 5900 KPulso lamp base F4 Flash tube 3200 J clear 5900 KProtecting glass UVE 5500 K
http://www.bron.ch/products/32_125_xx.htm (2 van 3) [26-11-2001 08:41:17]
Pulso F2 / Pulso F4
clear 5900 K
Special featuresFor price reason, the UV filter coating on the Pulso lamp base F2 has been applied directly onto the flash tube. The clear protecting glass does not have any optical effect. The UV filter coating on the F4 lamp base for thermal reason has been applied directly onto the protecting glass. If a uniform fitting of all lamp base types is intended, lamp base F2 may be fitted with clear flash tube and coated protecting glass as well.
Note: For safety reasons the lamp must not be operated without protecting glass.
http://www.bron.ch/products/32_125_xx.htm (3 van 3) [26-11-2001 08:41:17]
Pulso Twin 2x3200J
Pulso Twin 2x3200J Article no. 32.127.XX
Product summaryBi-tube + two connectors + for up to 2 x 3200 J + divides flash duration by 2 + broncolor standard bayonet mount + halogen mod. light + fan cooled + thermo switch + protective cover
Product descriptionTwin lamp base with two power cables of 5 m each, may be connected to 1 or 2 power packs, with fan and halogen lamp 650 W.
Scope of deliveryLamp base with 2 x 5 m power cable and lamp plug, pocket with replacement fuse, 2 safety bolts (for suspension mounting), protection cap.
Flash tube with integrated protecting glass and modelling light have to be ordered separately.
Technical dataFlash energy 2x3200 JStop at 2m distance100 iso reflector P65
128
http://www.bron.ch/products/32_127_xx.htm (1 van 2) [26-11-2001 08:41:21]
Pulso Twin 2x3200J
Flash duration 2x3000J:connected to 2 Grafit 2/A2:t0.5 1/735s / t0.1 1/250s
connected to 2 Grafit 4/A4:t0.5 1/370s / t0.1 1/125s
Weight 4 kgDimensions 264 x 120 x 198 mm
CompatibilityPower Packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Pulso 2, A2, 4, A4, Opus 2, A2, 4, A4, A8, Primo, Primo
A, Primo A fashion, Primo 4
AccessoriesReflector P65, P50 plus accessories provided for these reflectors such as honeycomb grid, filter and barn doors, handle.
Special featuresFor thermal reasons, the UV coating was applied on the protecting glass fixed to the base. Please indicate relevant order number when placing an order.
http://www.bron.ch/products/32_127_xx.htm (2 van 2) [26-11-2001 08:41:21]
http://www.bron.ch/products/32_903_xx.htm
Fibrolite Article no. 32.903.XX
Product summary3200 J head for optical fibres + 4 fibre connectors with individual power variation + anti heat protection + halogen mod. light + fan cooled + accessories available
Product description Fibrolite 3200 J can be connected to a power pack of up to 3200 J and is fitted with 4 outputs for one optical fibre each. Each output can be controlled separately
Scope of delivery Fibrolite with 5 m of lamp cable, bag with spare fuse, flash tube and 4 halogen lamps; without optical fibre which is included in the kit (art. no. 32.904.00)
Technical dataFlash energy max 3200 JDimensions 45 x 18 x 15 cmWeight 4 kg
Compatibility
http://www.bron.ch/products/32_903_xx.htm (1 van 2) [26-11-2001 08:41:25]
http://www.bron.ch/products/32_903_xx.htm
Power packs Grafit 2, 4, A2, A4, A2 plus, A4 plusPulso 2 ,A2, 4, A4Opus 2, A2, 4, A4, A8Primo, Primo A, Primo 4304, 404 Servor, 404 (older units must be slightly modified)
AccessoriesKit for Fibrolite art. no. 32.904.00
Consisting of:2 optical fibres art. no. 32.908.00 2 focusing lenses art. no. 32.910.00 2 arms to stand art. no. 32.911.00 2 clamps to stand art. no. 32.912.00 2 filter holders art. no. 32.905.00 1 set of colour filters art. no. 32.906.001 set of grey filters art. no. 32.907.00
Attention: kit does not include Fibrolite
Optional: Iron stand base art. no. 32.913.00
http://www.bron.ch/products/32_903_xx.htm (2 van 2) [26-11-2001 08:41:25]
Following spot Profil 11/26
Following spot Profil 11/26Spotlight + variable lighting angle from 11 to 26ƒ + up to 3200 J + halogen modelling lamp + including iris diaphragm
Famous FiveCoverage: slight centerweightEdge transfer: extremely sharp to unsharpShadow definition: very highShadow contrast: very highHighlight: small
Following spotProfil 11/26
Article no. 32.435.XX
Product description The following spot "Profil 11/26" offers a very hard light and an infinitely variable light angle from 11 to 26 degrees. The light cone can be adjusted by the focusing device from being extremely hard to soft - this is, of course, also
http://www.bron.ch/products/32_435_xx.htm (1 van 3) [26-11-2001 08:41:34]
Following spot Profil 11/26
possible while projecting masks. The iris diaphragm can be rotated through 360ƒ and contains 4 masks which allows most shapes to be produced. The iris diaphragm offers the projection possibility of infinitely variable circles of light with slight colour borders.The Profil 11/26 can be operated with all power packs even the older ones up to 3200 J (Pulso 8 excepted)
Scope of delivery Housing with lens system, light angle adjustment, focusing device, 5 m lamp cable, U-clamp mount, iris diaphragm, projection aperture bracket, colour filter bracket, including flash tube and modelling lamp.Colour correction filter for 5500 K and 5100 K
Technical dataFlash energy max. 3200 JLight angle adjustment
11ƒ to 26ƒ
F-stop in 2 m, 100 ISO
90.0 to 64.1
Connection cable 5 mFlash tube clear with socket L5746.01Modelling light halogen 650 W, 200/240 V version
no. 34.226.XXhalogen 250 W, 100/117 V versionno. 34.221.XXplug in socket with fuse
Weight 14.35 kgDimensions 82.5 x 23.75 x 14.5 cm
Compatibility
http://www.bron.ch/products/32_435_xx.htm (2 van 3) [26-11-2001 08:41:34]
Following spot Profil 11/26
Power packs Grafit 2, 4, A2, A4, A2 plus, A4 plusPulso 2, A2, 4, A4Opus 2, A2, 4, A4, A8Primo, Primo A, Primo A fashion, Primo 4304*, 404*, 404 Servor*
* wiring modification may be necessary
AccessoriesStands Mini-Hazylight stand, Senior AC, Compuls AC, stand to super-boom on casters
Special featuresAdjustable flash tube, folding bracket for flash tube and modelling lamp, stand fixation for the most common stands, locking device for ceiling mounting possible, colour temperature can be adjusted according to wish by the correction filter
http://www.bron.ch/products/32_435_xx.htm (3 van 3) [26-11-2001 08:41:34]
Pulso Spot 4
Pulso Spot 4Spotlight + removable Fresnel lens + up to 3200 J + halogen modelling lamp + projection attachment available for perfect projection
Famous FiveCoverage: evenEdge transfer: short gradationShadow definition: very highShadow contrast: highHighlight: small and burnt out
Pulso Spot 4 Article no. 32.425.XX
Product description Pulso Spot 4 may be operated with power packs Grafit, Pulso, Opus, Primo with a maximum of 3200 J. This design
http://www.bron.ch/products/32_425_xx.htm (1 van 3) [26-11-2001 08:41:44]
Pulso Spot 4
corresponds to the familiar structure of the Fresnel lens floodlight. An adjustable light angle extends from 15ƒ to 40ƒ.
Scope of delivery Housing with Fresnel lens, focusing facility, 5 m cable, U-bracket attachment with stand thread 3/8" including flash tube 3200 J and modelling lamp 300 W, bag with replacement fuse.
Technical dataFlash energy max. 3200 JLight angle adjustment
15ƒ - 40ƒ
F-stop at 2 m, 100 ISO
90
Connector cable 5 mFlash tube clearModelling light halogen 300 W, 220 V, including fuseWeight 8.6 kgDimensions 370 x 290 x 245 mm
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus, A4 plus
Pulso 2, A2, 4, A4Opus 2, A2, 4, A4, A8Primo, Primo A, Primo A fashion, Primo 4Flashman, Flashman 2, 304*, 404*, 404 servor*
* may require rewiring
http://www.bron.ch/products/32_425_xx.htm (2 van 3) [26-11-2001 08:41:44]
Pulso Spot 4
AccessoriesProjection adapter 150 mm
Art. no 33.618.00
Projection adapter 100 mm
Art. no 33.620.00
StandsMini-Hazylight stand Art. no 35.160.00Compuls stand AC Art. no. 35.113.00
Special featuresFor thermal reasons, a clear flash tube will be supplied. The Fresnel lens is UV coated for 5500 K
http://www.bron.ch/products/32_425_xx.htm (3 van 3) [26-11-2001 08:41:44]
Ringflash
RingflashCircular + shoot-trough with any camera + 3200 J head + can produce perfectly shadowless lighting or the unique shadow contours effect + universal camera mount + additional reflectors available
Famous FiveCoverage: very evenEdge transfer: endlessShadow definition: highShadow contrast: mediumHighlight: small circle
Ringflash Article no. 32.460.00
Product description Flash lamp without modelling light, which can be connected to broncolor power packs to 3200 J. With the circular flash tube and the possibility to photograph through centre of the lamp, special light effects are possible. Due to the adjustable camera holder the Ringflash can be adapted to almost every camera
http://www.bron.ch/products/32_460_00.htm (1 van 2) [26-11-2001 08:41:51]
Ringflash
Scope of delivery Ringflash with flash tube, camera holder and cable 3.3 m (11ft.)
Technical data
Flash energy max. 9600 J per minute
F-stop at 2 m, 100 ISO 45 6/10
Inside diameter of the housing
10 cm
Weight 700 g
Compatibility
The Ringflash can be used with all broncolor power packs except Pulso 8
Accessories
Soft reflector to Ringflash Art. no. 33.121.00
Macro reflector to Ringflash
Art. no. 33.122.00
Restrictions
The Ringflash must not be charged with more than 9600 J per minute (total amount of flashes). The lowest power setting of the 3200 J power packs should not be used - to avoid "afterglow". (This restriction does not apply to the main lamp connections of Grafit A4.)
http://www.bron.ch/products/32_460_00.htm (2 van 2) [26-11-2001 08:41:51]
Balloon
Balloon Article no. 33.161.00
Product descriptionSpecial area light as accessory to Primo/Pulso lamp bases and the entire range of broncolor compact units.UV resistant acrylic glass sphere, opal, diameter 30 cm with black plastic socket and Pulso bayonet.
Scope of deliveryAcrylic glass sphere with plastic socket and Pulso bayonet.
Technical data
http://www.bron.ch/products/33_161_00.htm (1 van 2) [26-11-2001 08:41:57]
Balloon
Dimensions Ø 30 cm
Number of flashes To protect against overheating, a cooling-off period of approx. 30 minutes must be observed after a continuous series of maximum 100 flashes (flash output 3200 J)
HMI-daylight sources Due to thermal reasons do not use as an accessory to the broncolor HMI F1200 lamp base
Compatibility
Lamp bases Pulso lamp base and Primo lamp base
Compact units Minipuls, Compuls, Minipuls C, Minipuls D
Continuous light source HMI 575
ApplicationThe area light with a 360° light angle is ideal for shooting interiors, and portrait photography. Due to the characteristic of the light, unconventional light control is also possible.
http://www.bron.ch/products/33_161_00.htm (2 van 2) [26-11-2001 08:41:57]
Boxlite 40
Boxlite 4030 x 40cm area + plexiglas diffuser + perfect eveness + no frame + can be piled + up to 1600 J.
Famous FiveCoverage: very evenEdge transfer: very softShadow definition: mediumShadow contrast: mediumHighlight: small, rectangular, even, sharp
Boxlite 40 Article no. 32.341.XX
Product description Small panel light in the dimensions 30 x 40 cm (12" x 16")Plexiglass diffuser, plexiglass housing
http://www.bron.ch/products/32_341_xx.htm (1 van 2) [26-11-2001 08:42:13]
Boxlite 40
Steel sheet rear wall with cable port and holder with bracket and quick change head and 5 m (16 ft.) cable Boxlite 40 with 2 flash tubes, 4 modelling lamps 4 x 40 W
Scope of delivery Boxlite with cable, bracket holder and quick change head
Technical dataFormat light area 30 x 40 cm (12" x 16")Flash energy max. 1600 JNumber of flashes To protect against overheating, a cooling-off period of approx. 20 minutes must be observed
after a maximum of 40 flashes 1600 JModelling light switch
Switch on the rear wall of the housing
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus, A4 plus
Pulso 2, A2, 4, A4Opus 2, A2, 4, A4, A8Primo, Primo A, Primo A fashion, Primo 4Flashman, 2, 304, 404, 404 servor, 260, 200, 1500 RT
Special featuresProportionality modelling light/flash light with the remaining lights of the product line cannot be implemented for thermal reasons
http://www.bron.ch/products/32_341_xx.htm (2 van 2) [26-11-2001 08:42:13]
Cumulite 2
Cumulite 21.2 x 2.0 m surface + 5 different light characters + plexiglas diffuser + receives regular heads with broncolor standard bayonet mount.
Famous fiveCoverage: even, graduated or centerweightedEdge transfer: extremely softShadow definition: medium to very lowShadow contrast: medium to very lowHighlight: even, graduated or centerweighted, rectangular, sharp
Cumulite 2 Article no. 33.534.00
Product description The reflector Cumulite 2 consists of glass fiber reinforced polyester with lateral attachment for ceiling mounting, a plexiglass diffuser with peripheral frame mounted on the reflector, and the bayonet connectors for three lamp bases
Scope of delivery
http://www.bron.ch/products/33_534_00.htm (1 van 2) [26-11-2001 08:42:27]
Cumulite 2
Reflector, diffuser, 2 glass counter-reflectors, cover for central opening.The lamp bases must be ordered separately
Technical dataStop in 2 m, 3200 J, 100 ISO 32 7/10Dimensions 200 x 120 x 45 cmWeight 29 kg
CompatibilityLamp bases Pulso F2, F4, 8, Primo, Twin
broncolor HMI F575
AccessoriesMegalite suspension, small: art. no. 35.315.00
Special featuresTo obtain a colour temperature of approx. 5500 K only clear flash tubes and protecting glasses should be used
http://www.bron.ch/products/33_534_00.htm (2 van 2) [26-11-2001 08:42:27]
http://www.bron.ch/products/33_511_xx.htm
Hazylight 2100 x 100cm area light + low diffusion + high brilliance + superb main light for table top and fashion + honey comb available
Famous fiveCoverage: evenEdge transfer: very softShadow definition: lowShadow contrast: lowHighlight: fairly even, sharp, square
Hazylight 2 Article no. 33.511.00
Product description Glass fiber reinforced polyester reflector with silver interior coating, double Pokalon diffuser.
http://www.bron.ch/products/33_511_xx.htm (1 van 3) [26-11-2001 08:42:41]
http://www.bron.ch/products/33_511_xx.htm
Scope of delivery Reflector with appropriate diffuserLamp base to be ordered separately
Technical dataDimensions 1040 x 1040 x 430 mmWeight 15.4 kgF-stop at 2 m, 3200 J100 ISO
32 4/10
CompatibilityLamp bases Pulso Hazy lamp bases 2, 4 with glass counter-reflector
Pulso Hazy lamp base 8, Twin with aluminium counter-reflector
AccessoriesHoneycomb grid adapter for Hazylight 2 and Hazylight SoftBarn door set with 2 clamps and 2 doorsStandsFlamingo stand and Hazylight standFor the Flamingo stand, a bracket article no. 35.215.00 is required
Special features
http://www.bron.ch/products/33_511_xx.htm (2 van 3) [26-11-2001 08:42:41]
http://www.bron.ch/products/33_511_xx.htm
Hazylight 2 is operated with the Hazy lamp bases. To guarantee even light distribution, a matted protecting glass should be used at all times. Pulso Hazy lamp bases 2, 4 are fitted with glass counter-reflectors for uniform light distribution. Pulso Hazy Twin lamp base and Pulso Hazy lamp base 8 for thermal reasons are fitted with aluminium counter-reflectors. The glass counter-reflector with progression and the aluminium counter-reflector should remedy the light concentration in the centre of the light area
http://www.bron.ch/products/33_511_xx.htm (3 van 3) [26-11-2001 08:42:41]
Hazylight Soft
Hazylight Soft100 x 100cm area light + high diffusion + high brilliance + superb main light for table top and fashion + honey comb available + broncolor standard bayonet mount
Famous fiveCoverage: evenEdge transfer: very softShadow definition: lowShadow contrast: lowHighlight: slightly centerweighted, sharp, square
Hazylight Soft Article no. 33.513.00
Product description Glass fiber reinforced polyester reflector with white interior coating and plexiglass diffuser.
http://www.bron.ch/products/33_513_xx.htm (1 van 3) [26-11-2001 08:42:54]
Hazylight Soft
Scope of delivery Reflector with appropriate diffuserLamp base to be ordered separately
Technical dataDimensions 1040 x 1040 x 430 mmWeight 16.9 kgF-stop at 2 m, 3200 J100 ISO
45
CompatibilityLamp bases Pulso lamp bases, F2, F4, 8 and Twin 2 x 1600 J, 2 x 3200 J
Primo lamp bases
AccessoriesHoneycomb grid adapter for Hazylight 2 and Hazylight SoftBarn door set with 2 clamps and 2 doors Glass counter-reflector with bracket for Hazylight Soft, suitable for Pulso lamp bases F2/F4.Alu counter-reflector with bracket for Hazylight Soft, suitable for Pulso lamp bases Twin and 8 StandsFlamingo stand and Hazylight standFor the Flamingo stand, a bracket article no. 35.215.00 is required
Special features
http://www.bron.ch/products/33_513_xx.htm (2 van 3) [26-11-2001 08:42:54]
Hazylight Soft
Pulso lamp bases F2, F4 are used as light elements for Hazylight Soft. In order to achieve a even uniformer illumination, a glass counter-reflector with progression can be used as an accessory. For thermal reasons, aluminium counter-reflectors should be used for the lamp bases Pulso Twin and Pulso 8
http://www.bron.ch/products/33_513_xx.htm (3 van 3) [26-11-2001 08:42:54]
Lightbar 60 Evolution
Lightbar 60 EvolutionLong and narrow + tunnel diffuser + clean light + barn doors available + 3200J / 2 x 3200J
Famous fiveCoverage: very evenEdge transfer: very softShadow definition: medium, depending orientationShadow contrast: medium, depending orientationHighlight: long strip, even, fairly sharp
http://www.bron.ch/products/32_351_xx.htm (1 van 3) [26-11-2001 08:43:01]
Lightbar 60 Evolution
Lightbar 60Evolution
Article no. 32.351.XX
Product description Light with dimensions 58 x 12 cm, can be operated at up to 1 x 3200 J, "tunnel-shaped" plexiglass diffuser, sheet steel back with cable outlet, 5 meter cable, model-ling light switch, and separate interchangeable tilt head
Scope of delivery Lightbar with one/two cables, flash tubes, modelling lamps and interchangeable tilt head
Technical dataFlash energy 1 x 3200 JF-stop at 2 m 100 ISO
32 1/10
Modelling light 220 V 10 x 20 W / 24 V110 V 10 x 20 W / 12 V
Cable length 1 x 5 mCooling 1 fanDimensions 58 x 12 x 13 cmWeight 3.6 kg
Compatibility
http://www.bron.ch/products/32_351_xx.htm (2 van 3) [26-11-2001 08:43:01]
Lightbar 60 Evolution
Power packs Grafit 2, 4, A2, A4, A2 plusA4 plus Pulso 2, A2, 4, A4Opus 2, A2, 4, A4, A8Primo, Primo A, Primo A fashion, Primo 4Flashman, Flashman 2, 304, 404, 404 Servor
For heat-related reasons, it is not possible to equip the Lightbar with a proportional halogen modelling lamp matching the other lamps.
AccessoriesArt. no. 33.270.00 Plexi cap transparent to Lightbar 60 EvolutionArt. no. 33.228.00 Barn door to Lightbar/Striplite 60 EvolutionArt. no. 33.274.00 Striplite adapter to Lightbar 60 EvolutionArt. no. 33.217.00 Honeycomb grid to Striplite 60 Evolution
http://www.bron.ch/products/32_351_xx.htm (3 van 3) [26-11-2001 08:43:01]
Megaflex
Megaflex1.2 x 2.0 m or 1.2 x 3.0 m surface + 3 different light characters + receives regular heads with broncolor standard bayonet mount.
Famous fiveCoverage: even to graduatedEdge transfer: extremely softShadow definition: very lowShadow contrast: very lowHighlight: even to graduated, rectangular, sharp
Megaflex 2 x 1.2 mMegaflex 3 x 1.2 m
Article no. 33.520.00Article no. 33.521.00
Product description The Megaflex large area light is a soft reflector with two diffusers that can be fitted with two Pulso F or Primo lamp
http://www.bron.ch/products/33_520_00.htm (1 van 3) [26-11-2001 08:43:14]
Megaflex
bases. It is available in two sizes: 2 x 1.2 m, and 3 x 1.2 m
Scope of delivery Reflector, disassembled into individual parts.Lamp bases and suspension must be ordered separately
Technical data Megaflex
2 x 1.2Megaflex3 x 1.2
F-stop at 2 m,100 ISO, 2 x 1600 J
22 9/10 22 6/10
Effective light area 194 x 114 cm2.2 m²
294 x 114 cm3.4 m²
Dimensions 200 x 120 x 70 cm 300 x 120 x 95 cmWeight 5.8 kg 9.2 kg
CompatibilityLamp bases Pulso, F2, F4, 8, Twin 2x1600 J, 2x3200 J, Primo
Minipuls C40, C80, C200broncolor HMI F575
Accessories
http://www.bron.ch/products/33_520_00.htm (2 van 3) [26-11-2001 08:43:14]
Megaflex
Suspension to Megaflex with Servor receiver article no. 35.312.XX:Servor receiver, 4 x 24 V motors for up and down movement, manual rotation 360ƒ. For mounting Megaflex on a Foba Roof Track (trolley set art. no. 35.333.00) or a Mega Track System (trolley set art. no. 35.332.00)
Suspension to Megaflex with manual control article no. 35.313.XX:Manual control, 4 x 24 V motors for up and down movement, manual rotation 360ƒ. For mounting Megaflex on a Foba Roof Track (trolley set art. no. 35.333.00) or a Mega Track System (trolley set article no. 35.332.00)
http://www.bron.ch/products/33_520_00.htm (3 van 3) [26-11-2001 08:43:14]
Megalite range
Megalite rangeIdeal solution for many situations requiring large light sources + continuous, seamless diffusion screen + different sizes up to 9.95 x 2.5 m + 1/3 f-stop from edge to edge + for furniture and automobile photography in particular.
Famous fiveCoverage: even to graduatedEdge transfer: extremely softShadow definition: extremely lowShadow contrast: very lowHighlight: even to graduated, rectangular, sharp
Megalite range
Product description Megalite is a reflector system available in two widths and element design in a total of 14 versions. Individual
http://www.bron.ch/products/33_540_00.htm (1 van 3) [26-11-2001 08:43:22]
Megalite range
elements supplied consist of square aluminium, lattice-work covered by aluminium-coated synthetic fibers with excellent reflection properties. The individual parts are assembled using hinges and bolts. Megalite is mounted on the ceiling rail system and remote-controlled via Servor 3
Scope of delivery Reflector, dismantled into individual parts, 2 textile diffusers, mounting instructionsLamp bases and ceiling suspension (c.f. Planning Aid Megalite) to be ordered separately
Technical data
Number of lamp basesto connect to broncolor
power packs
Maximum intensity inJ with special Mega-
lite flash tubes1.5 x 2.45 m 2 2 x 32001.5 x 3.70 m 3 3 x 32001.5 x 4.95 m 4 4 x 32001.5 x 6.20 m 5 5 x 32001.5 x 7.45 m 6 6 x 32001.5 x 8.70 m 7 7 x 32001.5 x 9.95 m 8 8 x 32002.5 x 2.45 m 4 4 x 32002.5 x 3.70 m 6 6 x 32002.5 x 4.95 m 8 8 x 32002.5 x 6.20 m 10 10 x 32002.5 x 7.45 m 12 12 x 32002.5 x 8.70 m 14 14 x 32002.5 x 9.95 m 16 16 x 3200
http://www.bron.ch/products/33_540_00.htm (2 van 3) [26-11-2001 08:43:22]
Megalite range
Compatibilitylamp bases Grafit 2, 4, A2, A4, A2 plus, A4 plus
Pulso 2, A2, 4, A4, 8Opus 2, A2, 4, A4, A8
Lamp bases Pulso 2, F2, 4, F4 with special flash tubesPrimo with special flash tubes Megalite lamp base
broncolor HMI F575 lamp base
AccessoriesFOBA ceiling rail system, complete suspension, servor remote-controlled, lamp bases
Special featuresPulso lamp bases with special flash tubes are used as light elements. Combination options and an ideal configuration depends on light requirements and the number of intended power packs. The two additional sheets "Planning Aid Megalite" contain information on possible combinations
http://www.bron.ch/products/33_540_00.htm (3 van 3) [26-11-2001 08:43:22]
Mini-Cumulite
Mini-Cumulite1.2 x 0.8 m surface + perfectly uniform light distribution + high diffusion + perfect for table top and food + broncolor standard bayonet mount
Famous fiveCoverage: evenEdge transfer: very softShadow definition: lowShadow contrast: lowHighlight: even, rectangular, sharp
Mini-Cumulite Article no. 33.141.00
Product description Reflector 80 x 120 cm in glass fiber polyester, U-bracket attachment, white interior coating, plexiglass diffuser
Scope of delivery Reflector with diffuser
http://www.bron.ch/products/33_141_00.htm (1 van 2) [26-11-2001 08:43:35]
Mini-Cumulite
Lamp base to be ordered separately
Technical dataFlash energy max. 6400 J
F-stop with graduated filterat 2 m, 100 ISO, 3200 J
32 3/10
Dimensions 120 x 80 x 45 cm
Weight 16 kg including U-bracket
Compatibility
lamp bases Pulso F2, F4, 8, Twin lamp bases 2 x 1600 J, 2 x 3200 JPrimo lamp base
Accessories
Honeycomb grid, glass counter-reflector for a max. of 3200 J (lamp base F2, F4), Pulso 8 and Twin lamp bases may only be operated with aluminium counter-reflector, double clamps to attach barn doors.
Stands / suspensionsHazylight stand, Flamingo stand, plus required attachments.Suspension to Megaflex.
http://www.bron.ch/products/33_141_00.htm (2 van 2) [26-11-2001 08:43:35]
Mini-Hazylight
Mini-Hazylight60 x 60cm area light + High brilliance + broncolor standard bayonet mount + perfect for smaller objects.
Famous fiveCoverage: evenEdge transfer: softShadow definition: mediumShadow contrast: mediumHighlight: even, sharp, square
Mini-Hazylight Article no. 33.133.XX
Product description Glass fiber reinforced polyester reflector with white interior coating, plexiglass diffuser, with bracket
http://www.bron.ch/products/33_133_xx.htm (1 van 2) [26-11-2001 08:43:49]
Mini-Hazylight
Scope of delivery Reflector with diffuser.Lamp base to be ordered separately
Technical dataDimensions 60 x 60 cm (24" x 24")Weight with bracket
5.3 kg
F-stop at 2 m, 100 ISO3200 J
32 7/10
CompatibilityLamp bases Pulso 2, F2, 4, F4, 8, Twin, Primo
Special featuresVery even illumination, plexiglass diffuser
http://www.bron.ch/products/33_133_xx.htm (2 van 2) [26-11-2001 08:43:49]
http://www.bron.ch/products/pulsoflex.htm
Pulsoflex C
Pulsoflex C 60 x 100Pulsoflex C 80 x 140Pulsoflex C 70 x 70Pulsoflex C 100 x 100Pulsoflex C 150 x 150Pulsoflex C 35 x 120
Pulsoflex EM
Pulsoflex EM 35 x 60Pulsoflex EM 55 x 95Pulsoflex EM 80 x 140Pulsoflex EM 50 x 50Pulsoflex EM 80 x 80Pulsoflex EM 110 x 110Pulsoflex EM 30 x 110Pulsoflex EM 40 x 155
Scrim Foil D 0.5 to Pulsoflex C/EM
http://www.bron.ch/products/pulsoflex.htm [26-11-2001 08:43:55]
Pulsoflex C 60 x 100
Pulsoflex C 60 x 100Lightweight softboxes + collapsible + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: very softShadow sharpness: mediumShadow depth: mediumHighlight: rectangular, slightly centerweighted, sharp
Pulsoflex C range
Product description Simple soft boxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions.
http://www.bron.ch/products/33_443_00.htm (1 van 3) [26-11-2001 08:44:04]
Pulsoflex C 60 x 100
By using two different adapter rings, it is possible to change the character of the light. (See paragraph "accessories".)
Scope of delivery 4 flexible supports, 1 reflector coating black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring without reflector Art. 33.400.00Adapter ring with integrated reflector Art. 43.100.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
F-stop at 2 m,100 ISO 3200 J
Art. no.
Square reflectors
Pulsoflex C 70 x 70 32 4/10 33.441.00
Pulsoflex C 100 x 100 32 4/10 33.442.00
Pulsoflex C 150 x 150 32 1/10 33.445.00
Rectangular reflectors
Pulsoflex C 60 x 100 32 4/10 33.443.00
Pulsoflex C 35 x 120 32 2/10 33.444.00
Pulsoflex C 80 x 140 32 3/10 33.446.00
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex C 70 x 70 or C 35 x 120 and Pulso adapter, Art. no. 33.501.00)
http://www.bron.ch/products/33_443_00.htm (2 van 3) [26-11-2001 08:44:04]
Pulsoflex C 60 x 100
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex C 70x70 and C 35x120 cannot be used with the Flashman lamp base. (Heat accumulates due to absence of fan.)
broncolor HMI F575: from edge length 80 cm
Accessories
Art. no. 33.286.00 Scrim foil D 0,5Art. no. 33.400.00 Adapter ring without reflector Art. no. 43.100.00 Adapter ring with integrated reflector
When using the adapter ring with the integrated reflector a high centred light concentration will be attained (Hot Spot), which can be eliminated by using the Pulso F lamp. In addition, with the "Hot Spot" you get more light.
http://www.bron.ch/products/33_443_00.htm (3 van 3) [26-11-2001 08:44:04]
Pulsoflex C 80 x 140
Pulsoflex C 80 x 140Lightweight softboxes + collapsible + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: very softShadow sharpness: mediumShadow depth: mediumHighlight: rectangular, slightly centerweighted, sharp
Pulsoflex C range
Product description Simple soft boxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions.
http://www.bron.ch/products/33_446_00.htm (1 van 3) [26-11-2001 08:44:08]
Pulsoflex C 80 x 140
By using two different adapter rings, it is possible to change the character of the light. (See paragraph "accessories".)
Scope of delivery 4 flexible supports, 1 reflector coating black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring without reflector Art. 33.400.00Adapter ring with integrated reflector Art. 43.100.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
F-stop at 2 m,100 ISO 3200 J
Art. no.
Square reflectors
Pulsoflex C 70 x 70 32 4/10 33.441.00
Pulsoflex C 100 x 100 32 4/10 33.442.00
Pulsoflex C 150 x 150 32 1/10 33.445.00
Rectangular reflectors
Pulsoflex C 60 x 100 32 4/10 33.443.00
Pulsoflex C 35 x 120 32 2/10 33.444.00
Pulsoflex C 80 x 140 32 3/10 33.446.00
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex C 70 x 70 or C 35 x 120 and Pulso adapter, Art. no. 33.501.00)
http://www.bron.ch/products/33_446_00.htm (2 van 3) [26-11-2001 08:44:08]
Pulsoflex C 80 x 140
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex C 70x70 and C 35x120 cannot be used with the Flashman lamp base. (Heat accumulates due to absence of fan.)
broncolor HMI F575: from edge length 80 cm
Accessories
Art. no. 33.286.00 Scrim foil D 0,5Art. no. 33.400.00 Adapter ring without reflector Art. no. 43.100.00 Adapter ring with integrated reflector
When using the adapter ring with the integrated reflector a high centred light concentration will be attained (Hot Spot), which can be eliminated by using the Pulso F lamp. In addition, with the "Hot Spot" you get more light.
http://www.bron.ch/products/33_446_00.htm (3 van 3) [26-11-2001 08:44:08]
http://www.bron.ch/products/33_441_00.htm
Pulsoflex C 70 x 70Lightweight softboxes + collapsible + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: very softShadow sharpness: mediumShadow depth: mediumHighlight: square, slightly centerweighted, sharp
Pulsoflex C range
Product description Simple soft boxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions.
http://www.bron.ch/products/33_441_00.htm (1 van 3) [26-11-2001 08:44:12]
http://www.bron.ch/products/33_441_00.htm
By using two different adapter rings, it is possible to change the character of the light. (See paragraph "accessories".)
Scope of delivery 4 flexible supports, 1 reflector coating black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring without reflector Art. 33.400.00Adapter ring with integrated reflector Art. 43.100.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
F-stop at 2 m,100 ISO 3200 J
Art. no.
Square reflectors
Pulsoflex C 70 x 70 32 4/10 33.441.00
Pulsoflex C 100 x 100 32 4/10 33.442.00
Pulsoflex C 150 x 150 32 1/10 33.445.00
Rectangular reflectors
Pulsoflex C 60 x 100 32 4/10 33.443.00
Pulsoflex C 35 x 120 32 2/10 33.444.00
Pulsoflex C 80 x 140 32 3/10 33.446.00
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex C 70 x 70 or C 35 x 120 and Pulso adapter, Art. no. 33.501.00)
http://www.bron.ch/products/33_441_00.htm (2 van 3) [26-11-2001 08:44:12]
http://www.bron.ch/products/33_441_00.htm
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex C 70x70 and C 35x120 cannot be used with the Flashman lamp base. (Heat accumulates due to absence of fan.)
broncolor HMI F575: from edge length 80 cm
Accessories
Art. no. 33.286.00 Scrim foil D 0,5Art. no. 33.400.00 Adapter ring without reflector Art. no. 43.100.00 Adapter ring with integrated reflector
When using the adapter ring with the integrated reflector a high centred light concentration will be attained (Hot Spot), which can be eliminated by using the Pulso F lamp. In addition, with the "Hot Spot" you get more light.
http://www.bron.ch/products/33_441_00.htm (3 van 3) [26-11-2001 08:44:12]
Pulsoflex C 100 x 100e
Pulsoflex C 100 x 100Lightweight softboxes + collapsible + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: endlessShadow sharpness: lowShadow depth: lowHighlight: square, slightly centerweighted, sharp
Pulsoflex C range
Product description Simple soft boxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions.
http://www.bron.ch/products/33_442_00.htm (1 van 3) [26-11-2001 08:44:16]
Pulsoflex C 100 x 100e
By using two different adapter rings, it is possible to change the character of the light. (See paragraph "accessories".)
Scope of delivery 4 flexible supports, 1 reflector coating black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring without reflector Art. 33.400.00Adapter ring with integrated reflector Art. 43.100.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
F-stop at 2 m,100 ISO 3200 J
Art. no.
Square reflectors
Pulsoflex C 70 x 70 32 4/10 33.441.00
Pulsoflex C 100 x 100 32 4/10 33.442.00
Pulsoflex C 150 x 150 32 1/10 33.445.00
Rectangular reflectors
Pulsoflex C 60 x 100 32 4/10 33.443.00
Pulsoflex C 35 x 120 32 2/10 33.444.00
Pulsoflex C 80 x 140 32 3/10 33.446.00
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex C 70 x 70 or C 35 x 120 and Pulso adapter, Art. no. 33.501.00)
http://www.bron.ch/products/33_442_00.htm (2 van 3) [26-11-2001 08:44:16]
Pulsoflex C 100 x 100e
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex C 70x70 and C 35x120 cannot be used with the Flashman lamp base. (Heat accumulates due to absence of fan.)
broncolor HMI F575: from edge length 80 cm
Accessories
Art. no. 33.286.00 Scrim foil D 0,5Art. no. 33.400.00 Adapter ring without reflector Art. no. 43.100.00 Adapter ring with integrated reflector
When using the adapter ring with the integrated reflector a high centred light concentration will be attained (Hot Spot), which can be eliminated by using the Pulso F lamp. In addition, with the "Hot Spot" you get more light.
http://www.bron.ch/products/33_442_00.htm (3 van 3) [26-11-2001 08:44:16]
Pulsoflex C 150 x 150
Pulsoflex C 150 x 150Lightweight softboxes + collapsible + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: endlessShadow sharpness: lowShadow depth: very lowHighlight: square, slightly centerweighted, sharp
Pulsoflex C range
Product description Simple soft boxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions.
http://www.bron.ch/products/33_445_00.htm (1 van 3) [26-11-2001 08:44:20]
Pulsoflex C 150 x 150
By using two different adapter rings, it is possible to change the character of the light. (See paragraph "accessories".)
Scope of delivery 4 flexible supports, 1 reflector coating black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring without reflector Art. 33.400.00Adapter ring with integrated reflector Art. 43.100.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
F-stop at 2 m,100 ISO 3200 J
Art. no.
Square reflectors
Pulsoflex C 70 x 70 32 4/10 33.441.00
Pulsoflex C 100 x 100 32 4/10 33.442.00
Pulsoflex C 150 x 150 32 1/10 33.445.00
Rectangular reflectors
Pulsoflex C 60 x 100 32 4/10 33.443.00
Pulsoflex C 35 x 120 32 2/10 33.444.00
Pulsoflex C 80 x 140 32 3/10 33.446.00
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex C 70 x 70 or C 35 x 120 and Pulso adapter, Art. no. 33.501.00)
http://www.bron.ch/products/33_445_00.htm (2 van 3) [26-11-2001 08:44:20]
Pulsoflex C 150 x 150
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex C 70x70 and C 35x120 cannot be used with the Flashman lamp base. (Heat accumulates due to absence of fan.)
broncolor HMI F575: from edge length 80 cm
Accessories
Art. no. 33.286.00 Scrim foil D 0,5Art. no. 33.400.00 Adapter ring without reflector Art. no. 43.100.00 Adapter ring with integrated reflector
When using the adapter ring with the integrated reflector a high centred light concentration will be attained (Hot Spot), which can be eliminated by using the Pulso F lamp. In addition, with the "Hot Spot" you get more light.
http://www.bron.ch/products/33_445_00.htm (3 van 3) [26-11-2001 08:44:20]
Pulsoflex C 35 x 120
Pulsoflex C 35 x 120Lightweight softboxes + collapsible + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: very softShadow sharpness: medium, depending orientationShadow depth: mediumHighlight: long strip, centerweighted, sharp
Pulsoflex C range
Product description Simple soft boxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions.
http://www.bron.ch/products/33_444_00.htm (1 van 3) [26-11-2001 08:44:24]
Pulsoflex C 35 x 120
By using two different adapter rings, it is possible to change the character of the light. (See paragraph "accessories".)
Scope of delivery 4 flexible supports, 1 reflector coating black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring without reflector Art. 33.400.00Adapter ring with integrated reflector Art. 43.100.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
F-stop at 2 m,100 ISO 3200 J
Art. no.
Square reflectors
Pulsoflex C 70 x 70 32 4/10 33.441.00
Pulsoflex C 100 x 100 32 4/10 33.442.00
Pulsoflex C 150 x 150 32 1/10 33.445.00
Rectangular reflectors
Pulsoflex C 60 x 100 32 4/10 33.443.00
Pulsoflex C 35 x 120 32 2/10 33.444.00
Pulsoflex C 80 x 140 32 3/10 33.446.00
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex C 70 x 70 or C 35 x 120 and Pulso adapter, Art. no. 33.501.00)
http://www.bron.ch/products/33_444_00.htm (2 van 3) [26-11-2001 08:44:24]
Pulsoflex C 35 x 120
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex C 70x70 and C 35x120 cannot be used with the Flashman lamp base. (Heat accumulates due to absence of fan.)
broncolor HMI F575: from edge length 80 cm
Accessories
Art. no. 33.286.00 Scrim foil D 0,5Art. no. 33.400.00 Adapter ring without reflector Art. no. 43.100.00 Adapter ring with integrated reflector
When using the adapter ring with the integrated reflector a high centred light concentration will be attained (Hot Spot), which can be eliminated by using the Pulso F lamp. In addition, with the "Hot Spot" you get more light.
http://www.bron.ch/products/33_444_00.htm (3 van 3) [26-11-2001 08:44:24]
Pulsoflex EM 35 x 60
Pulsoflex EM 35 x 60Lightweight softboxes + easily collapsible + recessed front for higher brilliance and less straylight + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: fairly softShadow sharpness: mediumShadow depth: highHighlight: rectangular, slightly centerweighted, sharp
Pulsoflex EM range
Product description Simple softboxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions. The third
http://www.bron.ch/products/33_415_00.htm (1 van 3) [26-11-2001 08:44:32]
Pulsoflex EM 35 x 60
Pulsoflex generation with its new construction principle facilitates mounting considerably. Furthermore these folding reflectors allow more possibilities in controlling light. The wide, projecting edge produces even sharper light areas and reduces stray light. In addition, various accessories may be mounted on this edge.
The character of light can be changed by using two different adapter rings (see paragraph 'accessories').
Scope of delivery 4 flexible supports, 1 reflector cover black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring with integrated reflector Art. 43.100.00Adapter ring without reflector Art. 33.400.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
Pulsoflex Light areaapprox.
F-stop at 2m,100 ISO, 3200J
Articlenumber
Square reflectors
EM 50 x 50 x 58* 45 x 45 cm 32 2/10 33.406.00
EM 80 x 80 x 55* 75 x 75 cm 32 8/10 33.407.00
EM 110 x 110 x 71* 105 x 105 cm 32 8/10 33.408.00
Rectangular reflectors
EM 35 x 60 x 58* 30 x 55 cm 32 7/10 33.415.00
EM 55 x 95 x 56* 50 x 90 cm 32 2/10 33.416.00
EM 80 x 140 x 69* 85 x 135 cm 32 7/10 33.417.00
EM 30 x 110 x 52* 25 x 115 cm 32 1/10 33.424.00
http://www.bron.ch/products/33_415_00.htm (2 van 3) [26-11-2001 08:44:32]
Pulsoflex EM 35 x 60
EM 40 x 155 x 70* 35 x 150 cm 32 1/10 33.425.00
* depth of the reflectors
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex EM 80 x 80 or EM 40 x 155and Pulsoadapter, art. no. 33.501.00)
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex EM 50 x 50, 35 x 60 and 30 x 110 cannot be used with the Flashman lamp base ! (Heat accumulates due to absence of fan.)
broncolor HMI F575 from edge length 80 cm
Accessories Art. no.
Honeycomb grid to Pulsoflex EM 80 x 80 33.190.00
Textile Grid Lighttools TM to Pulsoflex EM 80 x 80 33.193.00
Set of barn doors to Pulsoflex EM 80 x 80 33.250.00
Louvre set to Pulsoflex EM 80 x 80 33.280.00
Diffusing foil framed to Pulsoflex EM 80 x 80 33.283.00
Scrim foil D 0.5 33.286.00
Adapter ring without reflector 33.400.00
Intermediate diffuser to Pulsoflex EM 80 x 80 (view picture) 33.410.00
Intermediate diffuser to Pulsoflex EM 80 x 140 (view picture) 33.411.00
Round Mask to Pulsoflex EM 80 x 80 33.418.00
Adapter ring with integrated reflector 43.100.00
http://www.bron.ch/products/33_415_00.htm (3 van 3) [26-11-2001 08:44:32]
http://www.bron.ch/images/products/33_410_00.gif
http://www.bron.ch/images/products/33_410_00.gif [26-11-2001 08:44:36]
Pulsoflex EM 55 x 95
Pulsoflex EM 55 x 95Lightweight softboxes + easily collapsible + recessed front for higher brilliance and less straylight + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: fairly softShadow sharpness: mediumShadow depth: mediumHighlight: rectangular, slightly centerweighted, sharp
Pulsoflex EM range
Product description Simple softboxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions. The third
http://www.bron.ch/products/33_416_00.htm (1 van 3) [26-11-2001 08:44:46]
Pulsoflex EM 55 x 95
Pulsoflex generation with its new construction principle facilitates mounting considerably. Furthermore these folding reflectors allow more possibilities in controlling light. The wide, projecting edge produces even sharper light areas and reduces stray light. In addition, various accessories may be mounted on this edge.
The character of light can be changed by using two different adapter rings (see paragraph 'accessories').
Scope of delivery 4 flexible supports, 1 reflector cover black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring with integrated reflector Art. 43.100.00Adapter ring without reflector Art. 33.400.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
Pulsoflex Light areaapprox.
F-stop at 2m,100 ISO, 3200J
Articlenumber
Square reflectors
EM 50 x 50 x 58* 45 x 45 cm 32 2/10 33.406.00
EM 80 x 80 x 55* 75 x 75 cm 32 8/10 33.407.00
EM 110 x 110 x 71* 105 x 105 cm 32 8/10 33.408.00
Rectangular reflectors
EM 35 x 60 x 58* 30 x 55 cm 32 7/10 33.415.00
EM 55 x 95 x 56* 50 x 90 cm 32 2/10 33.416.00
EM 80 x 140 x 69* 85 x 135 cm 32 7/10 33.417.00
EM 30 x 110 x 52* 25 x 115 cm 32 1/10 33.424.00
http://www.bron.ch/products/33_416_00.htm (2 van 3) [26-11-2001 08:44:46]
Pulsoflex EM 55 x 95
EM 40 x 155 x 70* 35 x 150 cm 32 1/10 33.425.00
* depth of the reflectors
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex EM 80 x 80 or EM 40 x 155and Pulsoadapter, art. no. 33.501.00)
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex EM 50 x 50, 35 x 60 and 30 x 110 cannot be used with the Flashman lamp base ! (Heat accumulates due to absence of fan.)
broncolor HMI F575 from edge length 80 cm
Accessories Art. no.
Honeycomb grid to Pulsoflex EM 80 x 80 33.190.00
Textile Grid Lighttools TM to Pulsoflex EM 80 x 80 33.193.00
Set of barn doors to Pulsoflex EM 80 x 80 33.250.00
Louvre set to Pulsoflex EM 80 x 80 33.280.00
Diffusing foil framed to Pulsoflex EM 80 x 80 33.283.00
Scrim foil D 0.5 33.286.00
Adapter ring without reflector 33.400.00
Intermediate diffuser to Pulsoflex EM 80 x 80 (view picture) 33.410.00
Intermediate diffuser to Pulsoflex EM 80 x 140 (view picture) 33.411.00
Round Mask to Pulsoflex EM 80 x 80 33.418.00
Adapter ring with integrated reflector 43.100.00
http://www.bron.ch/products/33_416_00.htm (3 van 3) [26-11-2001 08:44:46]
Pulsoflex EM 80 x 140
Pulsoflex EM 80 x 140Lightweight softboxes + easily collapsible + recessed front for higher brilliance and less straylight + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: very softShadow sharpness: lowShadow depth: very lowHighlight: rectangular, slightly centerweighted, sharp
Pulsoflex EM range
Product description Simple softboxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions. The third
http://www.bron.ch/products/33_417_00.htm (1 van 3) [26-11-2001 08:44:53]
Pulsoflex EM 80 x 140
Pulsoflex generation with its new construction principle facilitates mounting considerably. Furthermore these folding reflectors allow more possibilities in controlling light. The wide, projecting edge produces even sharper light areas and reduces stray light. In addition, various accessories may be mounted on this edge.
The character of light can be changed by using two different adapter rings (see paragraph 'accessories').
Scope of delivery 4 flexible supports, 1 reflector cover black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring with integrated reflector Art. 43.100.00Adapter ring without reflector Art. 33.400.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
Pulsoflex Light areaapprox.
F-stop at 2m,100 ISO, 3200J
Articlenumber
Square reflectors
EM 50 x 50 x 58* 45 x 45 cm 32 2/10 33.406.00
EM 80 x 80 x 55* 75 x 75 cm 32 8/10 33.407.00
EM 110 x 110 x 71* 105 x 105 cm 32 8/10 33.408.00
Rectangular reflectors
EM 35 x 60 x 58* 30 x 55 cm 32 7/10 33.415.00
EM 55 x 95 x 56* 50 x 90 cm 32 2/10 33.416.00
EM 80 x 140 x 69* 85 x 135 cm 32 7/10 33.417.00
EM 30 x 110 x 52* 25 x 115 cm 32 1/10 33.424.00
http://www.bron.ch/products/33_417_00.htm (2 van 3) [26-11-2001 08:44:53]
Pulsoflex EM 80 x 140
EM 40 x 155 x 70* 35 x 150 cm 32 1/10 33.425.00
* depth of the reflectors
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex EM 80 x 80 or EM 40 x 155and Pulsoadapter, art. no. 33.501.00)
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex EM 50 x 50, 35 x 60 and 30 x 110 cannot be used with the Flashman lamp base ! (Heat accumulates due to absence of fan.)
broncolor HMI F575 from edge length 80 cm
Accessories Art. no.
Honeycomb grid to Pulsoflex EM 80 x 80 33.190.00
Textile Grid Lighttools TM to Pulsoflex EM 80 x 80 33.193.00
Set of barn doors to Pulsoflex EM 80 x 80 33.250.00
Louvre set to Pulsoflex EM 80 x 80 33.280.00
Diffusing foil framed to Pulsoflex EM 80 x 80 33.283.00
Scrim foil D 0.5 33.286.00
Adapter ring without reflector 33.400.00
Intermediate diffuser to Pulsoflex EM 80 x 80 (view picture) 33.410.00
Intermediate diffuser to Pulsoflex EM 80 x 140 (view picture) 33.411.00
Round Mask to Pulsoflex EM 80 x 80 33.418.00
Adapter ring with integrated reflector 43.100.00
http://www.bron.ch/products/33_417_00.htm (3 van 3) [26-11-2001 08:44:53]
Pulsoflex EM 50 x 50
Pulsoflex EM 50 x 50Lightweight softboxes + easily collapsible + recessed front for higher brilliance and less straylight + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: fairly softShadow sharpness: mediumShadow depth: mediumHighlight: square, slightly centerweighted, sharp
Pulsoflex EM range
Product description Simple softboxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions. The third
http://www.bron.ch/products/33_406_00.htm (1 van 3) [26-11-2001 08:45:00]
Pulsoflex EM 50 x 50
Pulsoflex generation with its new construction principle facilitates mounting considerably. Furthermore these folding reflectors allow more possibilities in controlling light. The wide, projecting edge produces even sharper light areas and reduces stray light. In addition, various accessories may be mounted on this edge.
The character of light can be changed by using two different adapter rings (see paragraph 'accessories').
Scope of delivery 4 flexible supports, 1 reflector cover black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring with integrated reflector Art. 43.100.00Adapter ring without reflector Art. 33.400.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
Pulsoflex Light areaapprox.
F-stop at 2m,100 ISO, 3200J
Articlenumber
Square reflectors
EM 50 x 50 x 58* 45 x 45 cm 32 2/10 33.406.00
EM 80 x 80 x 55* 75 x 75 cm 32 8/10 33.407.00
EM 110 x 110 x 71* 105 x 105 cm 32 8/10 33.408.00
Rectangular reflectors
EM 35 x 60 x 58* 30 x 55 cm 32 7/10 33.415.00
EM 55 x 95 x 56* 50 x 90 cm 32 2/10 33.416.00
EM 80 x 140 x 69* 85 x 135 cm 32 7/10 33.417.00
EM 30 x 110 x 52* 25 x 115 cm 32 1/10 33.424.00
http://www.bron.ch/products/33_406_00.htm (2 van 3) [26-11-2001 08:45:00]
Pulsoflex EM 50 x 50
EM 40 x 155 x 70* 35 x 150 cm 32 1/10 33.425.00
* depth of the reflectors
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex EM 80 x 80 or EM 40 x 155and Pulsoadapter, art. no. 33.501.00)
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex EM 50 x 50, 35 x 60 and 30 x 110 cannot be used with the Flashman lamp base ! (Heat accumulates due to absence of fan.)
broncolor HMI F575 from edge length 80 cm
Accessories Art. no.
Honeycomb grid to Pulsoflex EM 80 x 80 33.190.00
Textile Grid Lighttools TM to Pulsoflex EM 80 x 80 33.193.00
Set of barn doors to Pulsoflex EM 80 x 80 33.250.00
Louvre set to Pulsoflex EM 80 x 80 33.280.00
Diffusing foil framed to Pulsoflex EM 80 x 80 33.283.00
Scrim foil D 0.5 33.286.00
Adapter ring without reflector 33.400.00
Intermediate diffuser to Pulsoflex EM 80 x 80 (view picture) 33.410.00
Intermediate diffuser to Pulsoflex EM 80 x 140 (view picture) 33.411.00
Round Mask to Pulsoflex EM 80 x 80 33.418.00
Adapter ring with integrated reflector 43.100.00
http://www.bron.ch/products/33_406_00.htm (3 van 3) [26-11-2001 08:45:00]
Pulsoflex EM 80 x 80
Pulsoflex EM 80 x 80Lightweight softboxes + easily collapsible + recessed front for higher brilliance and less straylight + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: fairly softShadow sharpness: mediumShadow depth: mediumHighlight: square, slightly centerweighted, sharp
Pulsoflex EM range
Product description Simple softboxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions. The third
http://www.bron.ch/products/33_407_00.htm (1 van 3) [26-11-2001 08:45:08]
Pulsoflex EM 80 x 80
Pulsoflex generation with its new construction principle facilitates mounting considerably. Furthermore these folding reflectors allow more possibilities in controlling light. The wide, projecting edge produces even sharper light areas and reduces stray light. In addition, various accessories may be mounted on this edge.
The character of light can be changed by using two different adapter rings (see paragraph 'accessories').
Scope of delivery 4 flexible supports, 1 reflector cover black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring with integrated reflector Art. 43.100.00Adapter ring without reflector Art. 33.400.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
Pulsoflex Light areaapprox.
F-stop at 2m,100 ISO, 3200J
Articlenumber
Square reflectors
EM 50 x 50 x 58* 45 x 45 cm 32 2/10 33.406.00
EM 80 x 80 x 55* 75 x 75 cm 32 8/10 33.407.00
EM 110 x 110 x 71* 105 x 105 cm 32 8/10 33.408.00
Rectangular reflectors
EM 35 x 60 x 58* 30 x 55 cm 32 7/10 33.415.00
EM 55 x 95 x 56* 50 x 90 cm 32 2/10 33.416.00
EM 80 x 140 x 69* 85 x 135 cm 32 7/10 33.417.00
EM 30 x 110 x 52* 25 x 115 cm 32 1/10 33.424.00
http://www.bron.ch/products/33_407_00.htm (2 van 3) [26-11-2001 08:45:08]
Pulsoflex EM 80 x 80
EM 40 x 155 x 70* 35 x 150 cm 32 1/10 33.425.00
* depth of the reflectors
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex EM 80 x 80 or EM 40 x 155and Pulsoadapter, art. no. 33.501.00)
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex EM 50 x 50, 35 x 60 and 30 x 110 cannot be used with the Flashman lamp base ! (Heat accumulates due to absence of fan.)
broncolor HMI F575 from edge length 80 cm
Accessories Art. no.
Honeycomb grid to Pulsoflex EM 80 x 80 33.190.00
Textile Grid Lighttools TM to Pulsoflex EM 80 x 80 33.193.00
Set of barn doors to Pulsoflex EM 80 x 80 33.250.00
Louvre set to Pulsoflex EM 80 x 80 33.280.00
Diffusing foil framed to Pulsoflex EM 80 x 80 33.283.00
Scrim foil D 0.5 33.286.00
Adapter ring without reflector 33.400.00
Intermediate diffuser to Pulsoflex EM 80 x 80 (view picture) 33.410.00
Intermediate diffuser to Pulsoflex EM 80 x 140 (view picture) 33.411.00
Round Mask to Pulsoflex EM 80 x 80 33.418.00
Adapter ring with integrated reflector 43.100.00
http://www.bron.ch/products/33_407_00.htm (3 van 3) [26-11-2001 08:45:08]
Pulsoflex EM 110 x 110
Pulsoflex EM 110 x 110Lightweight softboxes + easily collapsible + recessed front for higher brilliance and less straylight + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: very softShadow sharpness: lowShadow depth: very lowHighlight: square, slightly centerweighted, sharp
Pulsoflex EM range
Product description Simple softboxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions. The third
http://www.bron.ch/products/33_408_00.htm (1 van 3) [26-11-2001 08:45:15]
Pulsoflex EM 110 x 110
Pulsoflex generation with its new construction principle facilitates mounting considerably. Furthermore these folding reflectors allow more possibilities in controlling light. The wide, projecting edge produces even sharper light areas and reduces stray light. In addition, various accessories may be mounted on this edge.
The character of light can be changed by using two different adapter rings (see paragraph 'accessories').
Scope of delivery 4 flexible supports, 1 reflector cover black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring with integrated reflector Art. 43.100.00Adapter ring without reflector Art. 33.400.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
Pulsoflex Light areaapprox.
F-stop at 2m,100 ISO, 3200J
Articlenumber
Square reflectors
EM 50 x 50 x 58* 45 x 45 cm 32 2/10 33.406.00
EM 80 x 80 x 55* 75 x 75 cm 32 8/10 33.407.00
EM 110 x 110 x 71* 105 x 105 cm 32 8/10 33.408.00
Rectangular reflectors
EM 35 x 60 x 58* 30 x 55 cm 32 7/10 33.415.00
EM 55 x 95 x 56* 50 x 90 cm 32 2/10 33.416.00
EM 80 x 140 x 69* 85 x 135 cm 32 7/10 33.417.00
EM 30 x 110 x 52* 25 x 115 cm 32 1/10 33.424.00
http://www.bron.ch/products/33_408_00.htm (2 van 3) [26-11-2001 08:45:15]
Pulsoflex EM 110 x 110
EM 40 x 155 x 70* 35 x 150 cm 32 1/10 33.425.00
* depth of the reflectors
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex EM 80 x 80 or EM 40 x 155and Pulsoadapter, art. no. 33.501.00)
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex EM 50 x 50, 35 x 60 and 30 x 110 cannot be used with the Flashman lamp base ! (Heat accumulates due to absence of fan.)
broncolor HMI F575 from edge length 80 cm
Accessories Art. no.
Honeycomb grid to Pulsoflex EM 80 x 80 33.190.00
Textile Grid Lighttools TM to Pulsoflex EM 80 x 80 33.193.00
Set of barn doors to Pulsoflex EM 80 x 80 33.250.00
Louvre set to Pulsoflex EM 80 x 80 33.280.00
Diffusing foil framed to Pulsoflex EM 80 x 80 33.283.00
Scrim foil D 0.5 33.286.00
Adapter ring without reflector 33.400.00
Intermediate diffuser to Pulsoflex EM 80 x 80 (view picture) 33.410.00
Intermediate diffuser to Pulsoflex EM 80 x 140 (view picture) 33.411.00
Round Mask to Pulsoflex EM 80 x 80 33.418.00
Adapter ring with integrated reflector 43.100.00
http://www.bron.ch/products/33_408_00.htm (3 van 3) [26-11-2001 08:45:15]
Pulsoflex EM 30 x 110
Pulsoflex EM 30 x 110Lightweight softboxes + easily collapsible + recessed front for higher brilliance and less straylight + different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: fairly softShadow sharpness: medium, depending orientationShadow depth: mediumHighlight: long strip, centerweighted, sharp
Pulsoflex EM range
Product description Simple softboxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions. The third
http://www.bron.ch/products/33_424_00.htm (1 van 3) [26-11-2001 08:45:22]
Pulsoflex EM 30 x 110
Pulsoflex generation with its new construction principle facilitates mounting considerably. Furthermore these folding reflectors allow more possibilities in controlling light. The wide, projecting edge produces even sharper light areas and reduces stray light. In addition, various accessories may be mounted on this edge.
The character of light can be changed by using two different adapter rings (see paragraph 'accessories').
Scope of delivery 4 flexible supports, 1 reflector cover black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring with integrated reflector Art. 43.100.00Adapter ring without reflector Art. 33.400.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
Pulsoflex Light areaapprox.
F-stop at 2m,100 ISO, 3200J
Articlenumber
Square reflectors
EM 50 x 50 x 58* 45 x 45 cm 32 2/10 33.406.00
EM 80 x 80 x 55* 75 x 75 cm 32 8/10 33.407.00
EM 110 x 110 x 71* 105 x 105 cm 32 8/10 33.408.00
Rectangular reflectors
EM 35 x 60 x 58* 30 x 55 cm 32 7/10 33.415.00
EM 55 x 95 x 56* 50 x 90 cm 32 2/10 33.416.00
EM 80 x 140 x 69* 85 x 135 cm 32 7/10 33.417.00
EM 30 x 110 x 52* 25 x 115 cm 32 1/10 33.424.00
http://www.bron.ch/products/33_424_00.htm (2 van 3) [26-11-2001 08:45:22]
Pulsoflex EM 30 x 110
EM 40 x 155 x 70* 35 x 150 cm 32 1/10 33.425.00
* depth of the reflectors
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex EM 80 x 80 or EM 40 x 155and Pulsoadapter, art. no. 33.501.00)
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex EM 50 x 50, 35 x 60 and 30 x 110 cannot be used with the Flashman lamp base ! (Heat accumulates due to absence of fan.)
broncolor HMI F575 from edge length 80 cm
Accessories Art. no.
Honeycomb grid to Pulsoflex EM 80 x 80 33.190.00
Textile Grid Lighttools TM to Pulsoflex EM 80 x 80 33.193.00
Set of barn doors to Pulsoflex EM 80 x 80 33.250.00
Louvre set to Pulsoflex EM 80 x 80 33.280.00
Diffusing foil framed to Pulsoflex EM 80 x 80 33.283.00
Scrim foil D 0.5 33.286.00
Adapter ring without reflector 33.400.00
Intermediate diffuser to Pulsoflex EM 80 x 80 (view picture) 33.410.00
Intermediate diffuser to Pulsoflex EM 80 x 140 (view picture) 33.411.00
Round Mask to Pulsoflex EM 80 x 80 33.418.00
Adapter ring with integrated reflector 43.100.00
http://www.bron.ch/products/33_424_00.htm (3 van 3) [26-11-2001 08:45:22]
Pulsoflex EM 40 x 155
Pulsoflex EM 40 x 155Lightweight softboxes + easily collapsible + recessed front for higher brilliance and less straylight + 8 different shapes and sizes + gives improved colour saturation + easily transportable
Famous fiveCoverage: evenEdge transfer: fairly softShadow sharpness: medium, depending orientationShadow depth: very lowHighlight: long strip, centerweighted, sharp
Pulsoflex EM range
Product description Simple softboxes as adapters to Pulso and Primo lamp bases, to the small lamps Picolite and Mobilite and all broncolor compact units with the Pulso bayonet and the broncolor HMI lamp base F575. They are available in different sizes, which differ in their shapes and dimensions. The third
http://www.bron.ch/products/33_425_00.htm (1 van 3) [26-11-2001 08:45:29]
Pulsoflex EM 40 x 155
Pulsoflex generation with its new construction principle facilitates mounting considerably. Furthermore these folding reflectors allow more possibilities in controlling light. The wide, projecting edge produces even sharper light areas and reduces stray light. In addition, various accessories may be mounted on this edge.
The character of light can be changed by using two different adapter rings (see paragraph 'accessories').
Scope of delivery 4 flexible supports, 1 reflector cover black/silver, 1 diffuser, transport bag
Attention: The adapter rings have to be ordered separately.Adapter ring with integrated reflector Art. 43.100.00Adapter ring without reflector Art. 33.400.00
Reason: The separate delivery allows the client:1. To choose the character of light.2. To operate several Pulsoflex units with one adapter ring - more reasonable.
Technical data
Pulsoflex Light areaapprox.
F-stop at 2m,100 ISO, 3200J
Articlenumber
Square reflectors
EM 50 x 50 x 58* 45 x 45 cm 32 2/10 33.406.00
EM 80 x 80 x 55* 75 x 75 cm 32 8/10 33.407.00
EM 110 x 110 x 71* 105 x 105 cm 32 8/10 33.408.00
Rectangular reflectors
EM 35 x 60 x 58* 30 x 55 cm 32 7/10 33.415.00
EM 55 x 95 x 56* 50 x 90 cm 32 2/10 33.416.00
EM 80 x 140 x 69* 85 x 135 cm 32 7/10 33.417.00
EM 30 x 110 x 52* 25 x 115 cm 32 1/10 33.424.00
http://www.bron.ch/products/33_425_00.htm (2 van 3) [26-11-2001 08:45:29]
Pulsoflex EM 40 x 155
EM 40 x 155 x 70* 35 x 150 cm 32 1/10 33.425.00
* depth of the reflectors
Compatibility
Lamp bases Pulso, Primo and Flashman lamp basesSmall lamps Picolite and Mobilite (only with light reflectors like Pulsoflex EM 80 x 80 or EM 40 x 155and Pulsoadapter, art. no. 33.501.00)
Compact units Compuls, Minipuls, Minipuls C, Minipuls D
Pulsoflex EM 50 x 50, 35 x 60 and 30 x 110 cannot be used with the Flashman lamp base ! (Heat accumulates due to absence of fan.)
broncolor HMI F575 from edge length 80 cm
Accessories Art. no.
Honeycomb grid to Pulsoflex EM 80 x 80 33.190.00
Textile Grid Lighttools TM to Pulsoflex EM 80 x 80 33.193.00
Set of barn doors to Pulsoflex EM 80 x 80 33.250.00
Louvre set to Pulsoflex EM 80 x 80 33.280.00
Diffusing foil framed to Pulsoflex EM 80 x 80 33.283.00
Scrim foil D 0.5 33.286.00
Adapter ring without reflector 33.400.00
Intermediate diffuser to Pulsoflex EM 80 x 80 (view picture) 33.410.00
Intermediate diffuser to Pulsoflex EM 80 x 140 (view picture) 33.411.00
Round Mask to Pulsoflex EM 80 x 80 33.418.00
Adapter ring with integrated reflector 43.100.00
http://www.bron.ch/products/33_425_00.htm (3 van 3) [26-11-2001 08:45:29]
Scrim Foil
Scrim Foil D 0.5 to Pulsoflex C/EM Article no. 33.286.00
reduces the light output up to 1 1/2 f-stopsRoll of 762 x 122 cm (25 x 4 ft.)
http://www.bron.ch/products/33_286_00.htm [26-11-2001 08:45:34]
Satellite Staro
Satellite Staro Article no. 33.151.00
Product summaryRound + soft-light + perfect shadows + high output compared to regular softboxes + perfect for fashion and others + broncolor standard bayonet mount
Product description The reflector Satellite Staro is a special light source with soft but brilliant light with high light output. Due to its round shape and a diameter of 90 cm it provides perfect, clear shadows. The exact amount of diffused light is attained by means of a matted sheet of plexiglass.The panels can be attached, with the clips, on the edge of the Satellite reflector. Satellite Staro can be operated with the lamp bases F2/F4 and Primo as well as with the compact units Minipuls C40/C80
Scope of delivery Reflector Satellite StaroThe lamp base F2/F4, Primo or Minipuls C have to be ordered separately
Technical data
Dimensions 88 x 25 cm
Weight 10 kg
F-stop at 2 m, 3200 J100 ISO
45 2/10
http://www.bron.ch/products/33_151_xx.htm (1 van 2) [26-11-2001 08:45:38]
Satellite Staro
Compatibility
lamp bases Pulso F2/F4, Primo
compact units Minipuls C40/C80
For thermal reasons, the use of the lamps Pulso Twin, Pulso 8 and broncolor HMI F575 is only possible without the diffuser. Due to its weight the compact unit Minipuls C200 is not recommended
Accessories
Honeycomb grid to Satellite Staro art. no. 33.209.00
Senior stand AC art. no. 35.110.00
Compuls stand AC art. no. 35.113.00
Can be mounted to the Hazylight/Flamingo stands by means of mounting set art. no. L5992.00
Special features
The surface of the plexiglass diffuser is matted to prevent disturbing reflections. The round shape guarantees perfect shadows and natural highlights
http://www.bron.ch/products/33_151_xx.htm (2 van 2) [26-11-2001 08:45:38]
Striplite 60 Evolution
Striplite 60 EvolutionLong and narrow + flat diffuser + clean light + barn doors available + 3200J / 2 x 3200J
Famous fiveCoverage: very evenEdge transfer: very softShadow definition: medium, depending orientationShadow contrast: medium, depending orientationHighlight: ong strip, even, sharp
Striplite 60Evolution
Article no. 32.301.XX
http://www.bron.ch/products/32_301_xx.htm (1 van 3) [26-11-2001 08:45:47]
Striplite 60 Evolution
Product description Light with dimensions 58 x 12 cm can be operated at up to 1 x 3200 J, plexiglass diffuser, sheet steel back with cable outlet, 5 meter cable, modelling light switch, and separate interchangeable tilt head.
Scope of delivery Striplite with one/two cables, flash tubes, modelling lamps and interchangeable tilt head.
Technical dataFlash energy 1 x 3200 JF-stop at 2 m 100 ISO
32 1/10
Modelling light 220 V 10 x 20 W / 24 V110 V 10 x 20 W / 12 V
Cable length 1 x 5 mCooling 1 fanDimensions 58 x 12 x 13 cmWeight 3.6 kg
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus
A4 plus Pulso 2, A2, 4, A4Opus 2, A2, 4, A4, A8Primo, Primo A, Primo A fashion, Primo 4Flashman, Flashman 2, 304, 404, 404 Servor
For heat-related reasons, it is not possible to equip the Striplite with a proportional halogen modelling lamp matching the other lamps.
http://www.bron.ch/products/32_301_xx.htm (2 van 3) [26-11-2001 08:45:47]
Striplite 60 Evolution
AccessoriesArt. no. 33.217.00 Honeycomb grid to Striplite 60 EvolutionArt. no. 33.228.00 Barn door to Lightbar/Striplite 60 EvolutionArt. no. 33.270.00 Plexi cap transparent to Lightbar 60 EvolutionArt. no. 33.272.00 Plexi cap mat to Lightbar 60 Evolution
http://www.bron.ch/products/32_301_xx.htm (3 van 3) [26-11-2001 08:45:47]
Conical snoot
Conical snoot Article no. 33.120.00
Product summarySpot alike illumination + sharp shadows + very narrow beam of light + for use as hair light in portraiture and an effect light in still life photography
Product description Aluminium made conical snoot with Pulso bayonet mount
Scope of delivery Conical snoot alone
Technical dataDimensions Ø 13.80 / Ø 7.60 x lenght 26.25 cmWeight 350 g
CompatibilityCompact units Minipuls C40, C80, C200, Minipuls 40, 80, Compuls 65, 95, 165 Lamp bases Pulso 2, F2, 4, F4, 8, Primo, Twin, Flashman
http://www.bron.ch/products/33_120_00.htm [26-11-2001 08:45:51]
Flooter S
Flooter SLarge fresnel-lens spot + adjustable light angle + very high luminous efficiency + for Primo and Pulso F lamp heads
Famous fiveCoverage: Slight centerweightEdge transfer: short graduationShadow definition: highShadow contrast: highHighlight: fairly small alittle bournt out
Pulso-Flooter S Article no. 32.430.XX
Product description The Pulso-Flooter S is a development of the known Pulso Flooter. In order to improve the light output, the Pulso-
http://www.bron.ch/products/33_430_00.htm (1 van 3) [26-11-2001 08:46:01]
Flooter S
Flooter has been modified in its light reflecting part. This results in an increase of the light output - especially in the wide angle - which may amount up to 0.9 f-stops. A Pulso lamp base F2, F4, 8 or Primo lamp base is used as a light source. A light-intensive Fresnel lens with an active diameter of 340 mm guarantees a very favourable degree of efficiency and provides an excellent and high light output. The light angle is adjusted by a handcrank in the range of 20ƒ to 70ƒ, depending on the lamp base used. To limit the light angle further and to modify the light distribution, a honeycomb grid may be used. This grid is held in front of the Fresnel lens by a replaceable steel sheet frame. This frame is fitted with attachment facilities for a colour filter. The familiar Pulso bayonet bracket may be used to fix the Primo and Pulso F2/F4/8 lamp base to the Flooter housing
Scope of delivery Flooter housing with Fresnel lens, U-bracket with attachment screw, frame for filter and honeycomb grid
Technical dataFlash energy 1600 J - 6400 J depending on lamp baseF-stop at 2 m100 ISO setting 20ƒ setting 70ƒ
with Pulso 2 f: 90.0 f: 45.7with Pulso 4 f: 128.0 f: 90.0with Pulso 8 f: 128.0 f: 90.0Light angle rangewith Pulso 2 20ƒ 70ƒwith Pulso 4 20ƒ 70ƒwith Pulso 8/Twin 30ƒ 70ƒDiameter lens (active aperture) 340 mmFocal width 270 mmDimensions 345 x 456 x 515 mmWeight 11 kg
http://www.bron.ch/products/33_430_00.htm (2 van 3) [26-11-2001 08:46:01]
Flooter S
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus, A4 plus
Pulso 2, A2, 4, A4, 8Opus 2, A2, 4, A4, A8Primo, Primo A, Primo A fashion, Primo 4Flashman, Flashman 2, all with appropriate Pulso or Primo lamp base
broncolor HMI with reflector to Flooter, art. no. 43.101.00
AccessoriesSpecial colour filter set, barn doors with two wings, honeycomb grid
StandsMini-Hazylight stand
RestrictionThe use of Pulso Twin lamp bases is not recommended because of uneven illumination
http://www.bron.ch/products/33_430_00.htm (3 van 3) [26-11-2001 08:46:01]
Fresnel spot attachment
Fresnel spot attachmentSmall fresnel-lens spot attachment + adjustable light angle + very high luminous
Famous FiveCoverage: evenEdge transfer: short graduationShadow definition: very highShadow contrast: highHighlight: small and burnt out
Fresnel spot attachment Article no. 33.630.00
Product description
http://www.bron.ch/products/33_630_00.htm (1 van 2) [26-11-2001 08:46:11]
Fresnel spot attachment
Attachment for Pulso, Primo lamp bases and Minipuls, Minipuls C, Compuls for spotlight effect with fresnel lens and light angle adjustment.Reasonably priced, convenient and variable spotlight version of excellent quality
Scope of delivery Attachment with fresnel lens
Technical data
Dimensions ø215 mm, length 210 mm
Fresnel lens ø160 mm
Focal width 250 mm
Light angle rangeF-stop in 2 m for 100 ISO
15ƒ- 35ƒ
Pulso F2 1600 J f: 45.1
Pulso F4 3200 J f: 64.1
http://www.bron.ch/products/33_630_00.htm (2 van 2) [26-11-2001 08:46:11]
Spot attachement for Picolite and Mobilite
Spot attachment for Picolite and Mobilite Article no. 33.631.00
Product descriptionAttachment for small lamps Picolite and Mobilite, for spotlight effect, with fresnel lens and light angle adjustment.
Reasonably priced, convenient and variable spotlight version of excellent quality.
Scope of deliveryAttachment with fresnel lens, mat protecting glass, UV-coated
Technical data
Fresnel lens Ø 80 mm
Light angle adjustment range 15° - 35°
F-stop in 2 m, 100 ISO, 1600 J f: 15° = 22 5/10, f: 35° = 11 5/10
F-stop in 50 cm, 100 ISO, 1600J f: 15° = 90, f: 35° = 32 8/10
Dimensions Ø 125 mm, length 125 mm
http://www.bron.ch/products/33_631_00.html (1 van 2) [26-11-2001 08:46:16]
Spot attachement for Picolite and Mobilite
Weight 300 g
ApplicationAll areas of direct light control for object photography (short distance).
http://www.bron.ch/products/33_631_00.html (2 van 2) [26-11-2001 08:46:16]
Optical snoot 100 or 150 mm
Optical snoot 100 or 150 mmProjection spot attachement + razor sharp projection + no colour fringing
Famous FiveCoverage: evenEdge transfer: short gradationShadow definition: very highShadow contrast: highHighlight: small and burnt out
Optical snoot 100 mmOptical snoot 150 mm
Article no. 33.618.00Article no. 33.620.00
Product description
http://www.bron.ch/products/33_618_00.htm (1 van 3) [26-11-2001 08:46:22]
Optical snoot 100 or 150 mm
This optical snoot consists of a base plate with conical snoot and optical capacitor system, and the projection lens with tube and thread for precision focusing. A module for aperture masks, slide holder, Gobos, stops, etc., is positioned in the focal plane
Scope of delivery Optical snoot with lens and 6 aperture masks (diameter 60, 50, 40, 30, 20 and 10 mm), filter bracket, correction filter, gobo holder
Technical dataOptical Snoot100mm
Optical Snoot150mm
Stop at 2 m 100 ISO, 3200 J
f: 22 3/10 f: 32 3/10
Smallest light circleat distance of 2 m
18.5 cm 12.5 cm
Largest light circleat distance of 2 m
113 cm 76 cm
Focal width projection lenses
100 mm 150 cm
Dimensions ø 180 x 200 mm ø 180 x 230 mm Weight 1280 g 1780 g
AccessoriesSet of masks, 4 parts, slide holder 6 x 6 cm, slide holder 24 x 36 mm Gobo holderSo-called Gobo masks (form masks), of etched steel sheets are available for instance from RDS, Japan, and Lee Colortrane, England (required diameter 101 mm).
http://www.bron.ch/products/33_618_00.htm (2 van 3) [26-11-2001 08:46:22]
Optical snoot 100 or 150 mm
Special featuresPulso Spot 4 may be fitted with 300 W or 250 W halogen only, otherwise, the plastic tubes of the lenses could be damaged by heat.Coating for colour temperature correction on the Pulso Spot 4 has been applied to the fresnel lens. When a optical snoot is used, the colour temperature correction is achieved by a filter.Caution: Since the optical snoot primarily was designed for steel masks, it does not contain a heat filter for slides. For this reason, a modelling light should be powered up only briefly.The connector piece with optical condenser system is identical for both versions, 150 mm and 100 mm. As a result, a customer may order nothing but the lens tube plus lens as an accessory for an available optical snoot
http://www.bron.ch/products/33_618_00.htm (3 van 3) [26-11-2001 08:46:22]
Projection attachment 100 mm to Picolite
Projection attachment 100 mm to Picolite Article no. 33.641.00
Product descriptionThe projection attachment consists of a casing with a slide-in for aperture masks and gobo holder, integrated templates (set of 4 pieces) and a corrected projection lens 100 mm. For an even illumination, use the enclosed protecting glass, mat on both sides.
Scope of deliveryProjection attachment with lens, integrated templates (set of 4 pieces), UV-coated protecting glass mat on both sides, a gobo holder and 3 aperture masks (30, 20 and 10 mm)
Technical data
F-stop 2 m, 100 ISO, 1600 J f: 11 5/10
F-stop 50 cm , 100 ISO, 1600 J f: 45 5/10
Largest light circle at distance of 2 m 68 cm
Focal width projection lens 100 mm
Dimensions 120 x 220 mm
http://www.bron.ch/products/33_641_00.html (1 van 2) [26-11-2001 08:46:27]
Projection attachment 100 mm to Picolite
Weight 380 g
Accessories
Gobo set, set of 8 pieces
Gobo masks of etched steel sheets are available from different producers (required diameter 101 mm)
ApplicationAny pattern, masks colours and effects of top quality may be taken with the projection attachment. Application in many sectors of object photography (short distance).
ArgumentsPerfect images without coloured edges and irradiation can be produced with the projection attachment to Picolite. Perfect conformity between modelling light and flash.
http://www.bron.ch/products/33_641_00.html (2 van 2) [26-11-2001 08:46:27]
P45
P45Narrow-angle reflector + approx. 1 f-stop extra compared with the P 70 reflector + accessories available
Famous FiveCoverage: slight centerweight to fairly uniformEdge transfer: short gradationShadow definition: highShadow contrast: highHighlight: small, burnt out
P45 Article no. 33.104.00
Product description Narrow angle aluminium reflector with Pulso bayonet mount
http://www.bron.ch/products/33_104_00.htm (1 van 2) [26-11-2001 08:46:34]
P45
Scope of delivery Reflector
Technical dataLighting angle 45ƒDimensions Ø 29.55 x 35.30 cmWeight 800 g
AccessoriesHoneycomb grids Art. no. 33.205.00Barn door with 4 wings Art. no. 33.246.00Colour filter assorted Art. no. 33.306.00
CompatibilityCompact units Minipuls C40, C80, C200, Minipuls 40, 80
Compuls 65, 95, 165Lamp bases Flashman, Pulso 2, F2, 4, F4, PrimoThe focussing of the Pulso F2/4 lamp bases should be used with care, as defocusing generates a dark zone in the centre of the illuminated area
http://www.bron.ch/products/33_104_00.htm (2 van 2) [26-11-2001 08:46:34]
http://www.bron.ch/products/33_105_00.htm
P50Narrow-angle reflector + variable light with Pulso F4-head approx. + 1 f-stop extra compared with the P 70 reflector + perfect with Pulso F4-head
Famous FiveCoverage: strong centerweight to uniformEdge transfer: short gradationShadow definition: highShadow contrast: highHighlight: small, burnt out
P50 Article no. 33.105.00
Product description Narrow angle reflector for Twin and Pulso 8 lamp bases as well as for broncolor HMI F575 with great light intensity.
http://www.bron.ch/products/33_105_00.htm (1 van 2) [26-11-2001 08:46:43]
http://www.bron.ch/products/33_105_00.htm
Comparable to P45 for Pulso F2 and F4
Scope of delivery Recommended for Twin and Pulso 8 lamp bases as well as for broncolor HMI F575.May also be used on Pulso F2, F4 lamp base, no barn doors
Technical dataDimensions ÿ 345 x 394 mmWeight 1.1 kgF-stop2 m / 100 ISO / 6400 J
Pulso 8 - 6400 J - 128.8Twin 2 x - 3200 J - 90.6
Light angle Pulso 8 52ƒTwin 2 49ƒ
AccessoriesHoneycomb grid Art. no. 33.205.00
http://www.bron.ch/products/33_105_00.htm (2 van 2) [26-11-2001 08:46:43]
P65
P65The standard reflector for Pulso 8 and Twin lamp heads + variable light with Pulso F4-head.
Famous FiveCoverage: strong centerweight to uniformEdge transfer: short gradationShadow definition: highShadow contrast: highHighlight: small, burnt out
P65 Article no. 33.106.00
Product description Standard aluminium reflector with Pulso bayonet mount
http://www.bron.ch/products/33_106_00.htm (1 van 2) [26-11-2001 08:46:52]
P65
Scope of delivery Reflector
Technical dataLighting angle 65ƒDimensions Ø 29.55 x 24.05 cmWeight 600 g
AccessoriesHoneycomb grids Art. no. 33.205.00Barn door with 4 wings Art. no. 33.246.00Colour filter assorted Art. no. 33.306.00
CompatibilityCompact units Minipuls C40, C80, C200, Minipuls 40, 80
Compuls 65, 95, 165Lamp bases Flashman, Pulso 2, F2, 4, F4, 8, Twin, Primo
http://www.bron.ch/products/33_106_00.htm (2 van 2) [26-11-2001 08:46:52]
P70
P70The standard reflector + hard light with uniform illumination + variable light with Pulso F2/4 lamp bases + accessories such as barn doors+ honeycomb grids available.
Famous FiveCoverage: slight centerweight to uniformEdge transfer: short gradationShadow definition: highShadow contrast: highHighlight: small, burnt out
P70 Article no. 33.107.00
Product description Standard aluminium reflector with Pulso bayonet mount
http://www.bron.ch/products/33_107_00.htm (1 van 2) [26-11-2001 08:46:58]
P70
Scope of delivery Reflector
Technical dataLighting angle 70ƒDimensions Ø 23.15 x 18.40 cmWeight 450 g
AccessoriesBarn door with 2 wings Art. no. 33.227.00Barn door with 4 wings Art. no. 33.247.00Colour filters assorted Art. no. 33.307.00Grey and correcting filters Art. no. 33.317.00Opal diffusers Art. no. 33.327.00Honeycomb grids Art. no. 33.207.00
CompatibilityCompact units Minipuls C40, C80, C200, Minipuls 40, 80
Compuls 65, 95, 165Lamp bases Flashman, Pulso 2, F2, 4, F4, 8, Twin, Primo
http://www.bron.ch/products/33_107_00.htm (2 van 2) [26-11-2001 08:46:58]
P120
P120The wide-angle reflector + uniform illumination + soft graduation + ideal for illuminating backgrounds
Famous FiveCoverage: evenEdge transfer: endlessShadow definition: very highShadow contrast: highHighlight: very small, burnt out
P120 Article no. 33.112.00
Product description Wide angle aluminium reflector with Pulso bayonet mount
http://www.bron.ch/products/33_112_00.htm (1 van 2) [26-11-2001 08:47:11]
P120
Scope of delivery Reflector
Technical dataLighting angle 120ƒDimensions Ø 22.00 x 4.40 cmWeight 250 g
CompatibilityCompact units Minipuls C40, C80, C200, Minipuls 40, 80
Compuls 65, 95, 165Lamp bases Flashman, Pulso 2, F2, 4, F4, 8, Twin, Primo
http://www.bron.ch/products/33_112_00.htm (2 van 2) [26-11-2001 08:47:11]
P-Soft
P-SoftFor the soft-edge uniform illumination with perfect shadows.
Famous FiveCoverage: evenEdge transfer: very softShadow definition: mediumShadow contrast: highHighlight: small circular, fairly even
P-Soft Article no. 33.110.00
Product description Soft light aluminium reflector with incorporated counter reflector and Pulso bayonet mount
http://www.bron.ch/products/33_110_00.htm (1 van 2) [26-11-2001 08:47:18]
P-Soft
Scope of delivery Reflector with counter reflector
Technical dataDimensions Ø 51.75 x 19.60 cmWeight 1.2 g
CompatibilityCompact units Minipuls C40, C80, C200, Minipuls 40, 80, Compuls 65, 95, 165Lamp bases Flashman, Pulso 2, F2, 4, F4, 8, Twin, PrimoThe focusing on the Pulso F2/4 lamp bases is restricted due to the counter reflector
http://www.bron.ch/products/33_110_00.htm (2 van 2) [26-11-2001 08:47:18]
P-Travel
P-TravelCompact standard reflector for the travelling photographer + easy to mount and to stow + barn door available.
Famous FiveCoverage: evenEdge transfer: softShadow definition: highShadow contrast: highHighlight: small, burnt out
P-Travel Article no. 33.103.00
Product description Because of its reduced dimensions the P-Travel reflector is, compared to the standard reflector P70, easy to stow
http://www.bron.ch/products/33_103_00.htm (1 van 2) [26-11-2001 08:47:30]
P-Travel
away resp. for use on-location. Despite of its small "size" the "light quality" has been retained. For accessories there is also a barn door with two wings available
Scope of delivery Reflector P-Travel
Technical dataF-stop at 2m100 ISO, 3200 J
90
Light angle approx. 55 ƒDimensions 195 x 90 mmWeight 350 g
AccessoriesBarn door with 2 wings to P-Travel (art. no. 33.243.00)
CompatibilityLamp bases Pulso F2, F4, Primo, broncolor HMI F575Compact units Compuls 65, 95, 165, Minipuls 40, 80
Minipuls C40, C80, C200
http://www.bron.ch/products/33_103_00.htm (2 van 2) [26-11-2001 08:47:30]
Umbrellas
White
Umbrella 102 cmUmbrella 82 cm
Silver
Umbrella 102 cmUmbrella 82 cm
Transparent
Umbrella 102 cmUmbrella 82 cm
http://www.bron.ch/products/umbrella.htm [26-11-2001 08:47:36]
Umbrella white 102 cm
Umbrella white 102 cmEasy to mount and to fold away
Famous fiveCoverage: evenEdge transfer: softShadow definition: mediumShadow contrast: mediumHighlight: midsized
Umbrella whiteØ 102 cm (40")
Article no. 33.453.00
http://www.bron.ch/products/33_453_00.htm (1 van 2) [26-11-2001 08:47:48]
Umbrella white 102 cm
Product description Umbrella with white coating, Ø 102 cm
Scope of delivery Umbrella
Technical dataF-stop at 2 m (6 ½ ft.)100 ISO, 3200 J
32 5/10
Dimensions Ø 102 cmWeight 530 g
Compatibilitycompact units Minipuls C40, C80, C200, Minipuls 40, 80, Minipuls D160 (plus),
Compuls 65, 95, 165Lamp bases Pulso 2, F2, 4, F4, Primo, Flashman* * only with umbrella bracket art. no. 33.490.00
http://www.bron.ch/products/33_453_00.htm (2 van 2) [26-11-2001 08:47:48]
Umbrella white 82 cm
Umbrella white 82 cm
Famous fiveCoverage: evenEdge transfer: softShadow definition: fairly highShadow contrast: mediumHighlight: fairly small
Umbrella white Ø 82 cm Article no. 33.460.00
http://www.bron.ch/products/33_460_00.htm (1 van 2) [26-11-2001 08:47:52]
Umbrella white 82 cm
Product summaryEasy to mount and to fold away
Product description Umbrella with white coating, Ø 82 cm
Scope of delivery Umbrella
Technical dataF-stop at 2 m (6 ½ ft.)100 ISO, 3200 J
16 8/10
Dimensions Ø 82 cmWeight 250 g
Compatibilitycompact units Minipuls C40, C80, C200
http://www.bron.ch/products/33_460_00.htm (2 van 2) [26-11-2001 08:47:52]
Umbrella silver 102 cm
Umbrella silver 102 cmEasy to mount and to fold away
Famous fiveCoverage: fairly evenEdge transfer: fairly softShadow definition: mediumShadow contrast: highHighlight: fairly small
Umbrella silverØ 102 cm (40")
Article no. 33.452.00
http://www.bron.ch/products/33_452_00.htm (1 van 2) [26-11-2001 08:48:01]
Umbrella silver 102 cm
Product description Umbrella with silver coating, Ø 102 cm
Scope of delivery Umbrella
Technical dataF-stop at 2 m (6 ½ ft.)100 ISO, 3200 J
45 8/10
Dimensions Ø 102 cmWeight 500 g
Compatibilitycompact units Minipuls C40, C80, C200, Minipuls 40, 80, Minipuls D160,
Compuls 65, 95, 165Lamp bases Pulso 2, F2, 4, F4, Primo, Flashman* * only with umbrella bracket art. no. 33.490.00
http://www.bron.ch/products/33_452_00.htm (2 van 2) [26-11-2001 08:48:01]
http://www.bron.ch/products/33_459_00.htm
Umbrella silver 82 cmEasy to mount and to fold away
Famous fiveCoverage: fairly evenEdge transfer: fairly softShadow definition: fairly highShadow contrast: highHighlight: small, burnt out
Umbrella silverØ 82 cm (40")
Article no. 33.459.00
Product description Umbrella with silver coating, Ø 82 cm
http://www.bron.ch/products/33_459_00.htm (1 van 2) [26-11-2001 08:48:07]
http://www.bron.ch/products/33_459_00.htm
Scope of delivery Umbrella
Technical dataF-stop at 2 m (6 ½ ft.)100 ISO, 3200 J
22 5/10
Dimensions Ø 82 cmWeight 250 g
Compatibilitycompact units Minipuls C40, C80, C200
http://www.bron.ch/products/33_459_00.htm (2 van 2) [26-11-2001 08:48:07]
Umbrella transparent 102 cm
Umbrella transparent 102 cmEasy to mount and to fold away
Famous fiveCoverage: slightly center wheigtedEdge transfer: softShadow definition: highShadow contrast: fairly highHighlight: faily small, burnt out
Umbrella transparentØ 102 cm (40")
Article no. 33.454.00
http://www.bron.ch/products/33_454_00.htm (1 van 2) [26-11-2001 08:48:16]
Umbrella transparent 102 cm
Product description Umbrella with transparent cover, Ø 102 cm
Scope of delivery Umbrella
Technical dataF-stop at 2 m (6 ½ ft.)100 ISO, 3200 J
32 6/10
Dimensions Ø 102 cmWeight 400 g
Compatibilitycompact units Minipuls C40, C80, C200, Minipuls 40, 80
Compuls 65, 95, 165Lamp bases Pulso 2, F2, 4, F4, Primo, Flashman* * only with umbrella bracket art. no. 33.490.00
http://www.bron.ch/products/33_454_00.htm (2 van 2) [26-11-2001 08:48:16]
Umbrella translucent 82 cm
Umbrella transparent 82 cm
Famous fiveCoverage: slightly center wheigtedEdge transfer: softShadow definition: highShadow contrast: fairly highHighlight: small, burnt out
Umbrella transparentØ 82 cm (40")
Article no. 33.461.00
http://www.bron.ch/products/33_461_00.htm (1 van 2) [26-11-2001 08:48:20]
Umbrella translucent 82 cm
Product summaryEasy to mount and to fold away
Product description Umbrella with translucent cover, Ø 82 cm
Scope of delivery Umbrella
Technical dataF-stop at 2 m (6 ½ ft.)100 ISO, 3200 J
22 5/10
Dimensions Ø 82 cmWeight 250 g
Compatibilitycompact units Minipuls C40, C80, C200
http://www.bron.ch/products/33_461_00.htm (2 van 2) [26-11-2001 08:48:20]
Satellite evolution
Satellite evolutionHard and directed light + superb shadows + a mind-blowing beauty of light + excellent tool for simulating sunlight in advertising and fashion studios and for automobile and furniture photography
Famous FiveCoverage: centerweighted to evenEdge transfer: short gradationShadow definition: highShadow contrast: highHighlight: circular, fairly even
Satellite Evolution Article no. 33.150.00
Product description The reflector "Satellite" is a special light source with a high light output, a very narrow light angle, well directed
http://www.bron.ch/products/33_150_00.htm (1 van 3) [26-11-2001 08:48:27]
Satellite evolution
light and very high f-stops (3200 J, 100 ISO, 2 m = 180 7/10; 30 m = 16 6/10). The adjustable Pulso F lamp base allows different light angles. The lamp base with the special additional reflector reduces the amount of stray light to a minimum and furthermore increases the light output. The panels can be attached, with the clips, on the edge of the Satellite reflector. Satellite can be operated with the lamp bases F2, F4, Minipuls C40, C80, C200 with adapter art. no. 35.229.00 as well as the continuous daylight source broncolor HMI F575
Scope of delivery Reflector Satellite with bracket and lamp base holder, protecting glass mat "UVE" (5500 K), special additional reflector to Pulso F2, F4 and broncolor HMI F575 lamp base.The Pulso F2, F4 or broncolor HMI F575 lamp base and the Minipuls C compact units have to be ordered separately
Technical dataF-stop at 2 m100 ISO, 3200 J
180 7/10
F-stop at 30 m 16 6/10Weight 5.6 kgWeight (w/o bracket)
4.35 kg
Dimensions 880 x 250 mm
CompatibilityLamp bases Pulso F2/F4
broncolor HMI F575Compact units Minipuls C40, C80, C200
Accessories
http://www.bron.ch/products/33_150_00.htm (2 van 3) [26-11-2001 08:48:27]
Satellite evolution
Adapter to Minipuls CStands Senior AC, Compuls ACHolder for Satellite bracket to Hazylight/Flamingo stands (art. no. 35.218.00)
Special featuresThe correspondence of the modelling light and the flash is ensured by focusing the F-lamp bases.When operating with a Pulso F2-lamp base with a coated flash tube, ensure that a protecting glass "mat" without coating (5900 K) is applied.
http://www.bron.ch/products/33_150_00.htm (3 van 3) [26-11-2001 08:48:27]
Spot attachment
Spot attachmentFor projection of a wide range of masks and shapes
Famous FiveCoverage: evenEdge transfer: fairly sharpShadow definition: very highShadow contrast: highHighlight: small, burnt out
Spot attachment Article no. 33.640.00
Product description Spot attachment for Pulso lamp base F2/F4, Primo, Minipuls, Minipuls C and Compuls.Double condenser system with focus adjustable projection lens.
http://www.bron.ch/products/33_640_00.htm (1 van 2) [26-11-2001 08:48:33]
Spot attachment
Slot to plug-in for Gobos, masks and filters
Scope of delivery Spot attachmentGobo holderFilter LB 5100 / 5500Protecting glass matt, uncoated, art. no. 34.326.596 aperture masks
AccessoriesFilter holder, Filter, Gobo mask
Special featuresQuality of image not comparable to projection attachment for Pulso Spot 4.Matted protecting glass required, delivered only in uncoated version. Filtering must be adapted to remaining lamp heads with appropriate LB filter.
http://www.bron.ch/products/33_640_00.htm (2 van 2) [26-11-2001 08:48:33]
Sunlite Set
Sunlite SetLike the sun +hard + perfect shadows + shadow controllable in depth and sharpness + fits to any Pulso lamp base up to 3200J
Famous FiveCoverage: very evenEdge transfer: endless to fairly sharpShadow definition: extremely highShadow contrast: very high to mediumHighlight: punctual and burnt out
Sunlite set Article no. 33.160.00
Product description Punctual light source with barn door and two different protecting glasses
http://www.bron.ch/products/33_160_00.htm (1 van 2) [26-11-2001 08:48:40]
Sunlite Set
Scope of delivery Sunlite flash tube 3200 J, barn door with 4 wings, with adapter back part and Pulso bayonet, one Sunlite protecting glass "UVE" and one Sunlite protecting glass mat "UVE".
Technical dataFlash energy max. 3200 JF-stop at 2 m, 100 ISOProtecting glass "UVE" 22 8/10
CompatibilityPulso lamp base 2, F2, 4, F4
http://www.bron.ch/products/33_160_00.htm (2 van 2) [26-11-2001 08:48:40]
Infrared transmitter IRQ
Infraredtransmitter IRQ
Article no. 36.107.00
Product summaryMakes infra-red wireless triggering possible + makes the synchronous cables superfluous
Product descriptionThe infrared transmitter is used for wireless, synchronized release of the broncolor flash units by the hot shoe or synchronous contact of the camera or the flashmeter. It has a suitable plug-in contact for the hot shoe with ISO centre contact. No "on/off" switch
Scope of deliveryTransmitter with 1 sync cable and battery 15 V
Technical dataNumber of channels
1
Range 10 mTrigger sequence 5 per s
http://www.bron.ch/products/36_107_00.htm (1 van 2) [26-11-2001 08:48:43]
Infrared transmitter IRQ
Power supply 1 dry cell 15 VArt. no. 36.415.00
CompatibilityThe unit allows the release of broncolor products with an integrated IR-receiver.Compact units of the Minipuls C line may be released with the IRX 2 transmitter only.
http://www.bron.ch/products/36_107_00.htm (2 van 2) [26-11-2001 08:48:43]
Infrared transmitter IRX 2
Infraredtransmitter IRX 2
Article no. 36.116.00
Product summaryCordless infra-red flash release + 2 channels + makes the synchronous cables superfluous
Product descriptionThe infrared transmitter is used for wireless, synchronized release of the broncolor flash units by the hot shoe or synchronous contact of the camera or the flashmeter. It has a suitable plug-in contact for the hot shoe with ISO centre contact. The IRX 2 transmitter features two transmission channels with an exceptionally large operating range
Scope of deliveryTransmitter with 1 sync cable and batteries
Technical dataNumber of channels
2
Range 30 m; with Grafit/Grafit A approx. 50 m (160 ft.); with Minipuls C/Minipuls D approx. 10 mTrigger sequence per s
1
http://www.bron.ch/products/36_116_00.htm (1 van 2) [26-11-2001 08:48:47]
Infrared transmitter IRX 2
Power supply 2 AA alkaline batteries1,5 Volt or 2 accus AA, NiCd 1,2 V
Compatibilitybroncolor products with an integrated IR-receiver may be released with this unit (including Minipuls C).
http://www.bron.ch/products/36_116_00.htm (2 van 2) [26-11-2001 08:48:47]
Remote control Servor 3
Remote controlServor 3
Article no. 36.202.00
Product summaryCan control nearly everything + power packs + ceiling systems
Product descriptionRemote control for power packs and for the mechanical Servor receivers
Scope of deliveryServor 32 batteries 9 V to be ordered separately
Technical dataNumber of addressable receivers
8 power packs and 4 lamp bases
per work station 6 motors each
http://www.bron.ch/products/36_202_00.htm (1 van 2) [26-11-2001 08:48:51]
Remote control Servor 3
Number of work stations in the same room
2
Remote control functions
- output setting- modelling light mode and on/off- lamp bases on/off (singly)- photocell, IRS receiver on/off- help functions, asymmetry, time t 0.1- slow charge- test- power pack on/off- mechanical movement of lamp bases
Storage options 2 slight settings, may be cancelled up individuallyExternal connection
for automatic operations with SINAR light measurement module
Power supply 2 batteries 9 VDimensions 185 x 75 x 40 mmWeight 340 g
CompatibilityManual-held transmitter suitable for Pulso 2, A2, 4, A4, 8, Opus 2, A2, 4, A4, A8 and 404/406 Servor. Servor 3 can also be used for Grafit but it does not cover the additional functions.
http://www.bron.ch/products/36_202_00.htm (2 van 2) [26-11-2001 08:48:51]
Remote control Servor d
Remote controlServor d
Article no. 36.204.00
Product descriptionThe remote control allows wireless controlling of the main functions for broncolor power packs Grafit A, Grafit and compact units Minipuls D, as well as the earlier models which are equipped with a Servor receiver.
Scope of deliveryServor d, operating instructionsThe battery 9V must be ordered separately
Technical data
Number of addressable power packs 4
Remote control functions - power pack on/off- controlling of the flash energy- modelling light on/off- lamp base outlets on/off- photocell / IR on/off- test flash- to store the lighting situations
Range 10 m
Power supply 1 battery 9 V
Dimensions 120 x 65 x 22 mm
Weight 160 g
AttentionThe functions "Lamp base outlet on/off", "individually controllable lamp output" and "store the lighting situations" can be used only with power packs which are equipped with the broncolor software version 16.09 or higher. The function "store the lighting situation" can be applied only with power packs which are equipped with the broncolor software version 16.08.
If the compact unit Minipuls D is used with the remote control servor d, three memory locations (instead of two) to store the lighting situations are available (m1 – m3) from the program version 18.08 on. The program version 18.07 allows to use the two memory locations m1 and m3.
http://www.bron.ch/products/36_204_00.html (1 van 2) [26-11-2001 08:48:57]
Remote control Servor d
CompatibilityRemote control suitable for broncolor power packs Grafit A, Grafit and the compact units Minipuls D, as well as the earlier models which are equipped with a Servor receiver.
ArgumentsServor d is a must where the flash units, for the technical reasons is no longer within reach of the operator or where the photographer wants to control the units from the standpoint of the camera.
http://www.bron.ch/products/36_204_00.html (2 van 2) [26-11-2001 08:48:57]
Colormeter FCC
Colormeter FCC Article no. 36.340.00
Product summaryMeasures colour temperature (ambi / flash) + ability to measure flash duration and Lux as well
Product descriptionFCC is a measuring unit to measure flash duration, colour temperature and light intensity in LUX. The measuring action is comparable to the one of the FCM 2. Values are displayed by the easy to read LCD display. This unit is operated by the eight multi-function keys and the release rocker switch. The flash may be released via sync cable or wireless via the integrated 2-channel IRS transmitter
Scope of deliveryColormeter FCC, shoulder strap, bag, operating instructions.Battery 9 V to be ordered separately.
Technical dataSystem 3-colour integrator to measure colour temperature Measuring method flash or permanent light (no add-on units required)Measuring range 1800 K to 40'000 K
http://www.bron.ch/products/36_340_00.htm (1 van 3) [26-11-2001 08:49:02]
Colormeter FCC
Filtering filter calculation LB (light balancing) in the range of +/- 199 miredfilter calculation CC (colour compensating) 50 green to 50 magenta
Reference programming of colour temperature corresponding to the film, at random or pre-programmed
Measuring time flash light 1/30 s, 1/250 s (selectable); permanent light depending on brightness (max. 10 s)Brightness max. comparable to f: 90 5/10 for 100 ISOSynchronization by infrared pulse (2-channel system), cable, photocellIRS transmitter suitable for flash release and remote control of colour temperature of Pulso A as well as
Grafit A / A plus power packs
ChronoscopeSystem measurement of time (t 0.1) of a flash pulseMeasuring range 1:15 s to 1:8000 s
LuxmeterMeasuring range 50 lx to 100'000 lxPower supply 1 battery 9 V, check displayDisplay liquid crystal displayDimensions 145 x 80 x 36 mmWeight 220 g (without battery)
CompatibilityPower packs Grafit 2, 4, A2, A4, A2 plus, A4 plus, Pulso 2, A2, 4, A4, 8, Opus 2, A2, 4, A4, A8 (with 2-
channel system release), Primo, Primo A, Primo A fashion, Primo 4, Flashman, Flashman 2, 304, 404, 404 Servor, 606, 606 Servor, Compuls, Impact, Minipuls C** Minipuls C units can only be released with FCC measuring units produced after 1 January, 1995
http://www.bron.ch/products/36_340_00.htm (2 van 3) [26-11-2001 08:49:02]
Colormeter FCC
Special featuresColour temperature may be exclusively corrected with the Pulso A and Grafit A / A plus power packs.
http://www.bron.ch/products/36_340_00.htm (3 van 3) [26-11-2001 08:49:02]
Flashmeter FCM 2
Flashmeter FCM 2 Article no. 36.316.00
Product summaryFor perfect metering + ambi / flash + TTL + contrast + multi flash + multi point + large display + can remote control the power of broncolor packs
Product descriptionThe broncolor FCM 2 is a time-integrating exposure meter for flash and continuous light measurement and for measuring a combination of both light sources. Both values can be stored separately and displayed separately or accumulatively. Multiple flash measurement is possible even if the individual flashes are of varying intensity. The flash is triggered via sync cable or integrated 2-channel transmitter. The flash power of broncolor Grafit/Grafit A Pulso/Pulso A, Opus/Opus A power packs can be controlled with the flashmeter FCM 2 by infrared pulses in 1/10, 1/3 or 1/1 stop steps. A measuring probe can be connected to the units, allowing a TTL measurement in the focal plane. Single- or multiple point contrast measurement can also be made. The unit is easy to operate, functional and designed for studio needs. With the help of adapter article no. 36.324.00 the meter can be connected to the Sinar Booster
Scope of deliveryFlashmeter FCM 2, shoulder strap, bag, operating instructions.Probe for FCM 2, adapter to Sinar Booster and battery 9 V must be ordered separately
http://www.bron.ch/products/36_316_00.htm (1 van 3) [26-11-2001 08:49:07]
Flashmeter FCM 2
Technical dataMeasuring range flash and mixed light
f: 1.0 to f: 90 9/10 with 100 ISO
continuous light EV 0 to EV 22,9 with 100 ISOMeasuring time flash and mixed light
1/500 s to 1/8 s
continuous light 1/500 s to 30 sMeasured value display
f: 1.0 to f: 180 9/10 in 1/10 stop steps
Display field liquid crystal displayFilm sensitivity 3 to 4000 ISOSynchronization 2-channel infrared signal, sync cable, starter photocellDimensions 145 x 80 x 36 mmWeight 200 g
CompatibilityGrafit 2, 4, A2, A4, A2 plus, A4 plus, Pulso 2, A2, 4, A4, 8, Opus 2, A2, 4, A4, A8 (with 2-channel system release), Flashman, Flashman 2, 404, 404 Servor, 606, 606 Servor, Compuls, Impact, Minipuls C*
* The Minipuls C-units can only be triggered with the FCM 2 (year of production 1/95) over the additional channel "9"
AccessoriesMeasuring probe for tht FCM 2 art. no. 36.323.00, measuring cassette 4x5", clamp attachment for FCM 2 on large format cameras, adapter to Sinar Booster art. no. 36.324.00 (incl. battery Varta V389 1,5 Volt).
Special features
http://www.bron.ch/products/36_316_00.htm (2 van 3) [26-11-2001 08:49:07]
Flashmeter FCM 2
Infrared release and operation of broncolor power packs, possibility for the user to set a correction (+/- f-stop) of the displayed reading.
http://www.bron.ch/products/36_316_00.htm (3 van 3) [26-11-2001 08:49:07]
broncolor pillar stand 215
broncolor pillar stand 215 Article no. 35.160.00
Product descriptionColumn stand with cable adjustment, crank gear and arm. Including a platform for power pack as well well as solid steel stand with casters. Practical application for lowest lamp positions. The robust and compact type of construction make possible maximum stability with minimum standing surface.
Scope of deliveryColumn stand with cable suspension, crank gear and arm; including a broncolor threaded bolt and two lamp adapters (normal and angle adapter). Power pack platform as well as stand base on casters. mounting instructions.
Technical data
http://www.bron.ch/products/35_160_00.htm (1 van 2) [26-11-2001 08:49:10]
broncolor pillar stand 215
Maximum height 215 cm
Arm length 30 cm
Measures platform for power pack
50 x 35 cm
Weight 38 kg
ApplicationPrimo- and Pulso lamp base when it is used with large-area Pulsoflex folding reflectors:
Pulsoflex EM 100 x 110; 80 x 140; 40 x 155
Pulsoflex C 100 x 100; 150 x 150
Special lights:
● Pulso-Spot 4● Following spot Profil 11/26● Pulso Flooter-S
Reflectors:
● Satellite Evolution● Satellite Staro
Area light:
● Mini-Hazylight
http://www.bron.ch/products/35_160_00.htm (2 van 2) [26-11-2001 08:49:10]
Compuls AC
Compuls AC Article no. 35.113.00
Product descriptionStand with 2 height extensions and 3/8" thread bolt
Scope of deliveryStand with 2 air cushioned height extension and bold with 3/8" thread.
Technical dataMinimum height 130 cm (4.2 ft.)Maximum height 320 cm (10 ft.)Weight 4 kg
http://www.bron.ch/products/35_113_00.htm (1 van 2) [26-11-2001 08:49:14]
Compuls AC
CompatibilityMinipuls C40, C80, C200, Primo lamp bases, Pulso, HMI F575 and HMI F1200 lamp bases, Flooter S, Pulso spot 4, Profil 11/26, Boxlite, Mini-Hazylight, Fibrolite, Lightbar/Striplite 60, Lightbar/Striplite 120, Satellite Evolution and Staro
http://www.bron.ch/products/35_113_00.htm (2 van 2) [26-11-2001 08:49:14]
Flamingo
Flamingo Article no. 35.210.00
Product summaryFor larger lightsources + light can be put in almost any position + lamp keeps always the determined position
Product descriptionColumn stand on foot cross with boom, cable control and hand crank, foot cross on four castors, two of which are fitted with brakes, with container for counter weights and shelf for power pack.
Scope of deliveryStand column with hand crank and wire, boom, four legs with rollers, one shelf, mounting screws. Bracket art. no. 35.215.00 to attach Hazylight 2, Hazylight Soft and Mini-Cumulite must be ordered separately.
Technical data
Maximum height 325 cm (10 ft.)
Minimum room height 205 cm (7 ft.)
Boom as of column 150 cm (5 ft.)
http://www.bron.ch/products/35_210_00.htm (1 van 2) [26-11-2001 08:49:17]
Flamingo
Boom as of front edge, foot
90 cm (3ft.)
Weight 43 kg
AccessoriesBracket art. no. 35.215.00 to attach Hazylight 2, Hazylight Soft and Mini-Cumulite.
CompatibilitySuitable for reflectors Hazylight 2, Hazylight Soft, Mini-Cumulite, Striplite.
http://www.bron.ch/products/35_210_00.htm (2 van 2) [26-11-2001 08:49:17]
Hazylight
Hazylight Stand Article no. 35.200.00
Product summaryFor larger lightsources + light can be put in almost any position + lamp keeps always the determined position
Product descriptionColumn stand on casters with platform for power pack, column made of black-coated squared steel tube, with counter-weight and cable suspension, transverse boom on casters
Scope of deliveryColumn stand with boom, four feet with casters, one platform, mounting screws, mounting instructions
Technical dataMaximum height 270 cm (9 ft.)Boom lenght 100 cm (3.3 ft.)Radius of feet 77.5 cm (2.6 ft.)Weight 38 kg
http://www.bron.ch/products/35_200_00.htm (1 van 2) [26-11-2001 08:49:21]
Hazylight
CompatibilityHazylight 2, Hazylight Soft, Mini-Cumulite
AccessoriesSpecial column length optional
http://www.bron.ch/products/35_200_00.htm (2 van 2) [26-11-2001 08:49:21]
Junior AC
Junior AC Article no. 35.100.00
Product descriptionStand with 2 height extensions and 3/8" thread bolt
Scope of deliveryStand with 2 air cushioned height extension and bold with 3/8" thread.
Technical dataMinimum height 90 cm (3 ft.)Maximum height 250 cm (8 ft.)Weight 1.25 kg
http://www.bron.ch/products/35_100_00.htm (1 van 2) [26-11-2001 08:49:25]
Junior AC
CompatibilityMinipuls C40, C80, C200, Primo lamp bases, Pulso, HMI F575 and HMI F1200 lamp bases, Boxlite, Fibrolite, Lightbar/Striplite 60.
http://www.bron.ch/products/35_100_00.htm (2 van 2) [26-11-2001 08:49:25]
Mini Flamingo
Mini Flamingo-stand Article no. 35.170.00
Product designationMini Flamingo-stand, Article no. 35.170.00
Product summaryFor larger lightsources + light can be put in almost any position + lamp keeps always the determined position
Product descriptionStand column with boom, cable adjustment and crank gear. Including a platform for power pack as well as two stand bases with casters (with total locking device). Practical application for lowest lamp positions. The robust type of construction make possible good stability.
Scope of deliveryStand column with boom, cable adjustment and crank gear. A platform for power pack as well as two stand bases with casters (with total locking device). Including a broncolor threaded bolt article no. 35.409.00 and two lamp adapters (standard and right-angle). Mounting instruction. The stand is delivered in corrugated cardboard boxes, dimensions 196 x 40 x 24 cm.
Technical data
Maximum height 260 cm
http://www.bron.ch/products/35_170_00.htm (1 van 2) [26-11-2001 08:49:28]
Mini Flamingo
Arm length from stand column
107 cm
Measurements of platform for power pack (trapeziform)
57,5/22,0 x 31,0 cm
Weight Gross: 43 kgNet: 19,5 kg
ApplicationPrimo- and Pulso lamp base when it is used with large-area Pulsoflex folding reflectors:
❍ Pulsoflex EM 110 x 110; 80 x 140; 40 x 155❍ Pulsoflex C 100 x 100; 150 x 150
Special lamps:❍ Pulso-Spot 4❍ Pulso Flooter-S
Reflectors:❍ Satellite Evolution❍ Satellite Staro
Area Lamp:❍ Mini-Hazylight
http://www.bron.ch/products/35_170_00.htm (2 van 2) [26-11-2001 08:49:28]
Senior AC
Senior AC Article no. 35.110.00
Product descriptionStand with 2 height extensions and 3/8" thread bolt
Scope of deliveryStand with 2 air cushioned height extension and bold with 3/8" thread.
Technical dataMinimum height 110 cm (3.6 ft.)Maximum height 260 cm (8.1 ft.)Weight 2.1 kg
http://www.bron.ch/products/35_110_00.htm (1 van 2) [26-11-2001 08:49:32]
Senior AC
AccessoriesCasters to senior stand Art. no. 35.111.00
CompatibilityMinipuls C40, C80, C200, Primo lamp bases, Pulso, HMI F575 and HMI F1200 lamp bases, Flooter S, Pulso spot 4, Profil 11/26, Boxlite, Fibrolite, Lightbar/Striplite 60, Lightbar/Striplite 120, Satellite Evolution and Staro (details see broncolor catalogue).
http://www.bron.ch/products/35_110_00.htm (2 van 2) [26-11-2001 08:49:32]
Stand adapters
Stand adapters
35.100.00Junior stand AC
35.110.00Senior stand AC
B
35.113.00Compuls stand AC
35.130.00Boom
35.140.00Super-boom
C C
35.210.00Flamingo stand D D
35.160.00Mini-Hazylight stand
H H H H H H H H H H H
35.200.00Hazylight stand
Stands of other brands
with 3/8"-thread F F F F F F F A F F F F
with cone inset16mm
I I I I I I I K I I I I
with cone inset18mm
G G G G G G G L G G G G
No further holder necessary A-L necessary holder Fastening is not recommended
http://www.bron.ch/products/stand_adapters.htm (1 van 3) [26-11-2001 08:49:54]
Stand adapters
25.200.00Threaded nipplewith 3/8" outside and inside thread
A
25.210.00Theaded boltwith 3/8" outside thread
B
35.146.00Holder to Supper-boom for lamp bases
C
35.215.00Hazylight and Mini-Cumulite holder to Flamingo stand
D
35.216.00Striplite holder to Flamingo stand
E
35.298.00Bolt for quick change head for stand of other brands, broncolor fitwith 3/8" outside and inside threadF
35.299.00Bolt for quick change head for stand of other brands, foba fitwith cone inset of 18mm diameter and 3/8" outside and inside threadG
35.409.00Threaded bolt to Mini-Hazylight stand for Pulso lamp baseswith 3/8" outside and inside thread
H
35.504.00Threaded bolt to pantograph for Pulso lamp baseswith 3/8" outside thread
I
http://www.bron.ch/products/stand_adapters.htm (2 van 3) [26-11-2001 08:49:54]
Stand adapters
35.505.00Threaded bolt to pantograph for Mini-Hazylight, Pulso Spot and Pulso-Flooter S baseswith 3/8" outside threadK
35.153.00Threaded bolt 3/8" to clamp
L
http://www.bron.ch/products/stand_adapters.htm (3 van 3) [26-11-2001 08:49:54]
http://www.bron.ch/products/35_140_00.htm
Super-boom Article no. 35.140.00
Product descriptionBoom arm with counterweight on steel stand
Scope of deliveryBoom arm with counterweight on steel stand, with adapter art. no. 35.146.00
Technical data
http://www.bron.ch/products/35_140_00.htm (1 van 2) [26-11-2001 08:49:57]
http://www.bron.ch/products/35_140_00.htm
Length 210 cm (7 ft,)Weight 9.9 kg
CompatibilityMinipuls C40, C80, C200, Primo lamp bases, Fibrolite, Lightbar/Striplite 60 (details see broncolor catalogue).
http://www.bron.ch/products/35_140_00.htm (2 van 2) [26-11-2001 08:49:57]
http://www.bron.ch/products/35_102_00.htm
Twin articulated armin 3 parts for Picolite and Mobilite
Article no. 35.102.00
Product descriptionThree separately adjustable twin-tubes, one adapter per stand clamp and per small lamp Picolite and Mobilite.
Attention: Can only be used with stand clamp.
Scope of deliveryTwin articulated arm complete, bolt with 5/8" thread and screw device for bolt adapter
Technical dataMaximum length 70 cm (28")
http://www.bron.ch/products/35_102_00.htm (1 van 2) [26-11-2001 08:50:02]
http://www.bron.ch/products/35_102_00.htm
Maximum width 6 cmWeight 0.8 kg
AccessoryStand clamp for twin articulated arm for Picolite / Mobilite / Fibrolite article no. 32.912.00
CompatibilitySmall lamp Picolite and Mobilite
http://www.bron.ch/products/35_102_00.htm (2 van 2) [26-11-2001 08:50:02]
HMI 575 ballast unit
HMI 575 ballast unit Article no. 41.100.XX
Product summaryContinuous light source + substitute or supplement to natural daylight + rated at 575 W + provides the same brightness as 1500 W of halogen light + flicker-free + constant output + hot restrikes + 100 - 240 V + 50-60 Hz
Product descriptionbroncolor HMI 575 electronic ballast unit with dim-function to HMI F575 lamp base. Switch for selecting the mode of operation "flicker-free" or "low-noise", automatic adaptation to the available power from 100 to 240V.
Scope of deliveryBroncolor HMI 575 electronic ballast unit with mains cable,transport protection cap and instruction manual, without discharge lamp and protecting glass.
Technical dataF-stop 45 9/10 at 1 s, ISO 100, 2 m with reflector P70 Standards EC standards 73/23, 89/336Power requirements
100-120 V and 200-240 V, 50-60 Hz
Power consumption 600 WFuse 10 AFDimensions 270 x 181 x 105 mm
http://www.bron.ch/products/41_100_xx.htm (1 van 2) [26-11-2001 08:53:00]
HMI 575 ballast unit
Weight 3.1 kgLamp model Osram HMI 575 W/SE
Philips MSR 575 HR
AccessoriesHMI F575 lamp base Article no. 42.101.XX
http://www.bron.ch/products/41_100_xx.htm (2 van 2) [26-11-2001 08:53:00]
HMI F575 lamp base
HMI F575 lamp base Article no. 42.101.XX
Product summaryFocussable lamp base + hot restrike + single ended HMI discharge lamp + electrically monitored safety cover + thermal circuit breaker + protective ground monitoring for optimal safety. bayonet mount for most Pulso reflectors
Product description The broncolor HMI F575 lamp base, focusable, is equipped with the familiar Pulso bayonet mount, so most of Pulso accessories can be used.Scope of deliverybroncolor HMI F575 lamp base with 3,5 m cable, transport protection cap and instruction manual, without discharge lamp and protecting glass.
Technical data
F-stop 45 9/10 at 1 s, ISO 100, 2 m with reflector P70
Standards EC standards 73/23, 89/336
Power requirements 100-120 V and 200-240 V, 50-60 Hz
Power consumption 600 W
Fuse 10 AF
Dimensions 277 x 120 x 198 mm
Weight 2.6 kg
Lamp model Osram HMI 575 W/SEPhilips MSR 575 HR
HMI F575 lamp bases are equipped with a Pulso bayonet socket.
http://www.bron.ch/products/42_101_xx.htm (1 van 4) [26-11-2001 08:53:07]
HMI F575 lamp base
You can direct and manipulate light, using practically any accessory from the broncolor product line. Accessories used in front of HMI F575 lamps will become quite hot, therefore; please exercise caution when using them, and note certain restrictions mentioned below.
Accessories
Reflectors to HMI F575
Art. no. 33.107.00 Standard reflector P70
Art. no. 33.106.00 Standard reflector P65
Art. no. 33.104.00 Narrow angle reflector P45
Art. no. 33.105.00 Narrow angle reflector P50
Art. no. 33.110.00 Softlight reflector P-Soft
Art. no. 33 112.00 Wide angle reflector P120
Art. no. 32.430.00 PulsoFlooter S
Art. no. 33.150.00 Reflector Satellite Evolution
Art. no. 43.103.00 Parabolic reflector complete with 4 diffuser filters (43.103.55)
Folding reflectors to HMI F575
Art. no. 33.407.00 Pulsoflex EM 80 x 80 cm (32 x 32")
Art. no. 33.408.00 Pulsoflex EM 110 x 110 cm (44 x 44")
Art. no. 33.417.00 Pulsoflex EM 80 x 140 cm (32 x 56")With removable diffuser, guided rods for an easy set-up and transport bagWithout adapter ring
Art. no. 33.442.00 Pulsoflex C 100 x 100 cm (40 x 40")
Art. no. 33.445.00 Pulsoflex C 150 x 150 cm (60 x 60")
Art. no. 33.446.00 Pulsoflex C 80 x 140 cm (32 x 56")With diffuser, rods and transport bagWithout adapter ring
http://www.bron.ch/products/42_101_xx.htm (2 van 4) [26-11-2001 08:53:07]
HMI F575 lamp base
Area lights to HMI F575
Art. no. 33.141.00 Mini-Cumulite
Art. no. 33.513.00 Hazylight-Soft
Art. no. 33.534.00 Cumulite 2
Art. no. 33.520.00 Megaflex 1.2 x 2 m (80 x 42")
Art. no. 33.521.00 Megaflex 1.2 x 3m (120 x 42")
Art. no. 33.540.00 Megalite 1.5 x 2.45 m (5x8 ft.)
Art. no. 33.540.01 Megalite 1.5 x 3.70 m (5x12 ft.)
Art. no. 33.540.02 Megalite 1.5 x 4.95 m (5x16 ft.)
Art. no. 33.540.03 Megalite 1.5 x 6.20 m (5x20 ft.)
Art. no. 33.540.04 Megalite 1.5 x 7.45 m (5x24 ft.)
Art. no. 33.540.05 Megalite 1.5 x 8.70 m (5x28 ft.)
Art. no. 33.540.06 Megalite 1.5 x 9.95 m (5x32 ft.)
Art. no. 33.541.00 Megalite 2.5 x 2.45 m (8x8 ft.)
Art. no. 33.541.01 Megalite 2.5 x 3.70 m (8x12 ft.)
Art. no. 33 541.02 Megalite 2.5 x 4.95 m (8x16 ft.)
Art. no. 33.541.03 Megalite 2.5 x 6.20 m (8x20 ft.)
Art. no. 33.541.04 Megalite 2.5 x 7.45 m (8x24 ft.)
Art. no. 33.541.05 Megalite 2.5 x 8.70 m (8x28 ft.)
Art. no. 33.541.06 Megalite 2.5 x 9.95 m (8x32 ft.)
Various accessories to broncolor HMI F575
Art. no. 44.100.00 Lamp to HMI F575 lamp base
Art. no. 44.102.55 Protecting glass, mat, to HMI F575 (5500 K)
Art. no. 44.101.55 Protecting glass to HMI F575 (5500 K)
Art. no. 44.200.00 Extension cable to HMI 575/1200 7 m (22 1/2 ft.)
http://www.bron.ch/products/42_101_xx.htm (3 van 4) [26-11-2001 08:53:07]
HMI F575 lamp base
Art. no. 46.100.00 HMI 575 case, empty, for 1 electronic ballast unitHMI 575 and 1 HMIF575 lamp base, made ofsynthetic material
http://www.bron.ch/products/42_101_xx.htm (4 van 4) [26-11-2001 08:53:07]
HMI 1200 ballast unit
HMI 1200 ballast unit Article no. 41.101.XX
Product summaryContinouos light source + substitute or supplement to natural daylight + rated at 575 W + provides the same brightness as 1500 W of halogen light + flicker-free + constant output + hot restrikes + 100 - 240 V + 50-60 Hz
Product descriptionbroncolor HMI 1200 ballast unit and lamp base with one 1200 W HMI-discharge lamp and interchangeable diffusion filters, suitable to the parabolic reflector
Scope of deliverybroncolor HMI 1200-ballast unit, mains cable and instruction manual
Technical dataStandards EC standards 73/23, 89/336Power requirements 100-120 V and 200-240 V, 50-60 HzPower consumption 1300WFuse 230V: 10A / 120V: 16ADimensions 280 x 215 x 115 mm (without handle)Weight 4.9 kgLamp model Osram HMI 1200 W/SE
Philips MSR 1200 HR (limited focusing)
http://www.bron.ch/products/41_101_xx.htm (1 van 2) [26-11-2001 08:53:12]
HMI 1200 ballast unit
AccessoriesHMI F1200 lamp base Article no. 42.102.XX
http://www.bron.ch/products/41_101_xx.htm (2 van 2) [26-11-2001 08:53:12]
HMI F1200 lamp base
HMI F1200 lamp base Article no. 42.102.XX
Product summaryFocussable lamp base + hot restrike + single ended HMI discharge lamp + electrically monitored safety cover + thermal circuit breaker + protective ground monitoring for optimal safety + softboxes available
Product description The broncolor HMI F1200 lamp base is equipped with a modified Pulso bayonet. The Pulso accessories can not be used for thermal reasons. The HMI 1200 ballast unit can be used to supply the broncolor HMI 575 lamp bases. The lamp base can be focused
Scope of deliverybroncolor HMI F1200-lamp base with 3,5 m cable (without bulb), parabolic reflector, diffusion filter set (consisting of 4 different lenses), grey transport protection cap
Technical dataStandards EC standards 73/23, 89/336Power requirements 100-240V, 50-60 HzPower consumtion 1300WFuse 230V: 10A / 120V: 16ADimensions 222 x 120 x 198 mm (without parabolic reflector)Weight 3.05 kg
http://www.bron.ch/products/42_102_xx.htm (1 van 3) [26-11-2001 08:53:17]
HMI F1200 lamp base
Lamp model Osram HMI 1200 W/SEPhilips MSR 1200 HR (limited focusing)
Light angle of the diffusion filter STPL 7ƒ x 8ƒLight angle of the diffusion filter MFL 9ƒ x 21ƒLight angle of the diffusion filter WFL 26ƒ x 56ƒLight angle of the diffusion filter VWFL 47ƒ x 47ƒ
Compatibility and possible restrictionsThe HMI F1200 lamp bases are equipped with a modified Pulso bayonet socket. Therefore it is not possible to use the Pulso reflector range
Light capacityThe data below were measured with an Osram HMI 575 W/SE element at a distance of 2 meters, with apertures set for 100 ISO and 1/30 sec. F-stop with parabolic reflector and uncoated diffusion lens STPL:
Spot: f: 64 1/10 Flood: f: 11 6/10
With UVE filter coating, values are 2/10 stops lower.
AccessoriesArt. no. 33.190.00 honeycomb grid to Pulsoflex H 80 x 80Art. no. 33.250.00 set of barn doors to Pulsoflex H 80 x 80, comprises 2 wings and 2 textile masksArt. no. 33.280.00 louvre set to Pulsoflex H 80 x 80Art. no. 33.283.00 diffusing foil on frame to Pulsoflex H 80 x 80Art. no. 33.227.00 barn door with 2 wingsArt. no. 33.247.00 barn door with 4 wingsArt. no. 44.200.00 extension cable, 7 m (22 1/2 ft.)
http://www.bron.ch/products/42_102_xx.htm (2 van 3) [26-11-2001 08:53:17]
HMI F1200 lamp base
Special featuresFor safety reasons always use a diffusion lens.
http://www.bron.ch/products/42_102_xx.htm (3 van 3) [26-11-2001 08:53:17]
Area lights to HMI F575
Area lights to HMI F575
Mini-Cumulite 0.8 x 1.20 m (32 x 48")
Hazylight-Soft 1.0 x 1.00 m (40 x 40")
Megaflex 1.2 x 2.00 m (42 x 80")Megaflex 1.2 x 3.00 m (42 x 120")
Megalite 1.5 x 2.45 m (5 x 8 ft.)Megalite 1.5 x 3.70 m (5 x 12 ft.)Megalite 1.5 x 4.95 m (5 x 16 ft.)Megalite 1.5 x 6.20 m (5 x 20 ft.)Megalite 1.5 x 7.45 m (5 x 24 ft.)Megalite 1.5 x 8.70 m (5 x 28 ft.)Megalite 1.5 x 9.95 m (5 x 32 ft.)Megalite 2.5 x 2.45 m (8 x 8 ft.)Megalite 2.5 x 3.70 m (8 x 12 ft.)Megalite 2.5 x 4.95 m (8 x 16 ft.)Megalite 2.5 x 6.20 m (8 x 20 ft.)Megalite 2.5 x 7.45 m (8 x 24 ft.)Megalite 2.5 x 8.70 m (8 x 28 ft.)Megalite 2.5 x 9.95 m (8 x 32 ft.)
http://www.bron.ch/products/area_light.htm [26-11-2001 08:53:20]
Folding reflectors to HMI F575
Folding reflectors to HMI F575
Pulsoflex EM 80 x 80 cm (32 x 32")
Pulsoflex EM 110 x 110 cm (44 x 44")
Pulsoflex EM 80 x 140 cm (32 x 56")
Pulsoflex C 100 x 100 cm (40 x 40")
Pulsoflex C 150 x 150 cm (60 x 60")
Pulsoflex C 80 x 140 cm (32 x 56")
http://www.bron.ch/products/fold_reflectors.htm [26-11-2001 08:53:23]
Folding reflectors to HMI F1200
Folding reflectors to HMI F1200
43.402.00 Pulsoflex H 80 x 80 cm (32 x 32")43.441.00 Pulsoflex H 110 x 110 cm (44 x 44")
http://www.bron.ch/products/fr_hmi1200.htm [26-11-2001 08:53:24]
Reflectors to HMI F575
Reflectors to HMI F575
Standard reflector P70 Standard reflector P65Narrow angle reflector P45Narrow angle reflector P50Softlight reflector P-SoftWide angle reflector P120Pulso-Flooter SReflector Satellite EvolutionParabolic reflector complete with 4 diffuser filters (43.103.55)
http://www.bron.ch/products/reflectors.htm [26-11-2001 08:53:27]
Various accessories for HMI 575
Various accessories for HMI 575
44.100.00 Lamp to HMI F575 lamp base44.102.55 Protecting glass, mat (5500 K)44.101.55 Protecting glass (5500 K)44.200.00 Extension cable to HMI 575/1200 7 m (22 1/2 ft.)46.100.00 HMI 575 case, empty
http://www.bron.ch/products/va_hmi575.htm [26-11-2001 08:53:29]
Various accessories to HMI F1200
Various accessories for HMI F1200
33.190.00 honeycomb grid to Pulsoflex H 80 x 8033.250.00 set of barn doors to Pulsoflex H 80 x 80, comprises 2 wings and 2 textile masks33.280.00 louvre set to Pulsoflex H 80 x 8033.283.00 diffusing foil on frame to Pulsoflex H 80 x 8033.227.00 barn door with 2 wings33.247.00 barn door with 4 wings44.200.00 extension cable, 7 m (22 1/2 ft.)43.102.55 Diffusion filter set to HMI F1200 (5500 K)43.102.59 Diffusion filter set to HMI F1200 (clair)44.103.00 Lamp to HMI F1200 lamp base
http://www.bron.ch/products/va_hmi1200.htm [26-11-2001 08:53:32]