Brodit Pedastal Mounts
16
Pedestal Mounts
description
Brodit's Pedestal Mounts is a mounting system for heavier devices which require a stable and strong installation. The pedestal mounts provide an extra sturdy and secure mounting platform which can be used in a variety of vehicles, e.g. commercial vehicles, trucks, tractors, fork lifts, boats and RVs. In addition to vehicles and commercial equipment, our pedestal mounts can be used in retail stores, kiosks, gyms, conference rooms, trade shows etc. With our pedestal mounts you can mount/attach a wide array of products such as tablets, payment terminals, mobile computers, scanning devices, two-way radios, navigation units, rugged PDAs, printers and mobile phones.
Transcript of Brodit Pedastal Mounts
Pedestal Mounts
2
Sets: Adjustable Mounts
Item no. 215518Pedestal mount 4” with MultiMoveClip.
Total height 138 mmRound mounting plate with diameter 100 mm, thickness 9 mm, 6 holes.
Item no. 215563Pedestal mount 4”.
Total height 109 mmRound mounting plate with diameter 100 mm, thickness 9 mm, 6 holes.
Combine complete sets with loose parts and create your own unique design as needed. The angle between the pedestal mount parts can be changed as required. Can be angled in steps of 24°, up to a maximum of 192° (8 different positions). The mounting surface is 50x50 mm wide with dual AMPS-holes. Available in black and white.
Adjust them
yourself!
Black White Product Total height215532 216532 Pedestal Mount 2” 62 mm215525 216525 Pedestal Mount 4” 114 mm215526 216526 Pedestal Mount 6” 164 mm215533 216533 Pedestal Mount 8” 214 mm215550 216550 Pedestal Mount 10” 264 mm
Item no. 215523Swiveling pedestal mount 6” with MultiMoveClip.
The top part of the mount swivels 300°. Perfect for use of payment terminals, monitors etc. in shops and for use of two devices, for example a rugged PDA and printer. The inclination of the mounting surfaces are 10° and 20°. Fits for all Brodit holders with tilt swivel. The angle of the pedestal mount parts can be changed as required.
Total height 262 mmRound mounting plate with diameter 100 mm, thickness 9 mm, 6 holes.
Swivels!
Square mounting surface
3
Sets: Adjustable Mounts
Black White Product Total height215786 216786 Pedestal Mount 2” 62 mm215787 216787 Pedestal Mount 4” 114 mm215788 216788 Pedestal Mount 6” 164 mm215789 216789 Pedestal Mount 8” 214 mm215790 216790 Pedestal Mount 10” 264 mm
Combine complete sets with loose parts and create your own unique design as needed. The angle between the pedestal mount parts can be changed as required. Can be angled in steps of 24°, up to a maximum of 192° (8 different positions). The mounting surface has a diameter of 64 mm. The multiple holes allows for various mounting solutions including radial adjustment. Available in black and white.
Round mounting surface
4
Black White Product Total length Inner length CC-dimension215515 216515 Extension part 2” 82 mm 14 mm 52 mm215514 216514 Extension part 4” 132 mm 64 mm 102 mm215534 216534 Extension part 6” 182 mm 114 mm 152 mm215549 216549 Extension part 8” 232 mm 164 mm 202 mm215674 216674 Rotatable Extension Part 4” 132 mm 64 mm 102 mm
Parts: Adjustable MountsCreate your own design by screwing together base/top and extension parts. The angle of the pedestal mounts can be changed as needed in steps of 24°, up to a maximum of 192° (8 different positions). 1 screw + bult included per part.
Create your
own solution!
Total length
Inner length
CC dimension
Diameter 30 mm
Rotatable extension part 4”Can rotate around its own axis, locked into position using a torx key.Total length 132 mmCC-dimension 102 mm
Black - item no. 215674White - item no. 216674
Extension parts
5
Parts: Adjustable Mounts
Item no. Product Total length Mounting surface CC-to surface215516 Base/top, black 46 mm Square, 50x50 mm 31 mm216516 Base/top, white 46 mm Square, 50x50 mm 31 mm215708 Base/top for radial adjustment 46 mm Round, 64 mm diameter 31 mm215785 Base/top multiple holes, for 46 mm Round, 64 mm diameter 31 mm radial adjustment, black216785 Base/top multiple holes, for 46 mm Round, 64 mm diameter 31 mm radial adjustment, white
Item no. 215516
Item no. 215708
Item no. 215785
Item no. 216516
Base/top parts
6
Accessories: Adjustable MountsVesa mounting plates
The Vesa mounting plates enables you to mount your monitor onto a Pedestal Mount solution. The mounting plates has AMPS-standard holes that fi ts onto all top parts for adjustable Pedestal Mounts. Available in one version with single 75 mm holes and one with dual 75 mm and 100 mm holes. Made of aluminum, available in black.
Item no. Product215756 Dual Vesa mounting plate, 75 mm and 100 mm.
Item no. Product215791 Single Vesa mounting plate, 75 mm.
Item no. Product215709 U-Mount. Fits bars between 45-50 mm wide.215710 U-Mount. Fits bars between 35-40 mm wide.
The U-Mount can be mounted on square surfaces. Works perfect on for instance the rollbar of a fork lift or a square pillar in the ware house. Dual sets of AMPS holes makes the fi tting of the base/top (item no. 215516/216516) easy. Comes with complete set of 4 screws, 4 lock washers and 1 Allen key for attaching base/top and 1 Allen key for locking the U-mount into place. Fits bars with a width between 45-50 mm or 35-40 mm. Available in black only.
U-Mount
7
Suction Cup Mount
Fork Lift Mount
The heavy duty Suction Cup Mount can be used in vehicles where the only possible placement is on the windshield. The suction cups are extra strong and provides a fi rm installation. The dual AMPS holes on the mounting base fi ts the base/top part (item no. 215516/216516). Available in black only.
The Fork Lift Mount can be mounted onto square surfaces. Works perfect on for instance the rollbar of a fork lift. Available in two versions; one with multiple AMPS holes for fi tting a base/top (item no 215516/216516) and one with the base/top integrated in the Fork Lift mount. Adjustable to fi t rods and bars between 5 mm to 130 mm. Available in black only.
Item no. Product215712 Single Suction Cup Mount215671 Dual Suction Cup Mount215675 Triple Suction Cup Mount
Item no. Product215677 Fork Lift Mount, multiple AMPS holes215784 Fork Lift Mount, integrated top/base
Accessories: Adjustable Mounts
Item no. 215677 Item no. 215784
8
Accessories: Adjustable MountsMultiMoveClip
Item no 215668MultiMoveClip - Black
Item no 216668MultiMoveClip - White
Fits for all Brodit holders with tilt swivel. Perfect for a fi rm installation that still allows usage of different device holders on the same Pedestal Mount. Switch easily between holders in seconds.
Item no 215538MultiMoveClip, High strength - Black
Item no 215699MultiMoveClip - black, High strength, easy open.
Item no 215718MultiMoveClip - black, High strength, easy open.
WingnutsMaybe your Pedestal Mount solution needs to be adjusted repeatedly, or you cannot carry around an Allen Key all the time. Then we can offer the wingnuts as an accessory. Just replace the nut and bolt that comes with the Pedestal Mount with the wingnuts instead.
Item no 215670Wingnuts - BlackSet of 2.
Item no 215676Wingnut and distance plate for mounting on Suction Cup Mounts (see page 7). Nuts, bolts, and lock washers included.
Item no 215679Extra distance plates for mounting on Suction Cup Mounts. (see page 7). Includes 5 plates and 5 sets of 4 nuts, bolts, and lock washers.
9
Accessories: Adjustable MountsItem no. 215522 (black) 216522 (white)Mounting plate roundDiameter 100 mmThickness 9 mmAMPS-holes + 6 holes4 screws + lock washers for attachment of base/top included.
Item no. 215521Swiveling platePerfect for installing any equipment that needs to be turned for use from different directions. Swivels 300°.Diameter 64 mmThickness 22 mmAMPS-holes + 4 holes4 screws + nuts included.
Other Accessories
Item no. 215536 (black)Item no. 216536 (silver)Spare part screwsSet consisting of 4 screws and 4 lock washers.
Item no. 215537Spare part screwsSet consisting of 4 screws and 4 nuts.
Item no. 215535 (black)Item no. 216535 (silver)Spare part screwsSet consisting of 2 screws, 2 nuts and an Allen Key. Fits for all extension parts.
Item no. 215591 (black)Item no. 216591 (silver)Spare part screwsUsed to attach MultiMoveClip to top/bottom part (215516 black, 216516 white).
Item no. 215524Angled top part Perfect for installing equipment in a 10° or 20° angle or for installing two devices, e.g. a rugged PDA and a printer.
64x64x46 mm (length+width+height)2 sets of 4 screws + 4 nuts + 4 lock washers included for attachment to base/top.
10
Pipe Mounts
The Standard Pipe Mounts fi t all cylindrical shaped objects with a diameter between 19-30 mm. Can be used to mount for instance a Rugged PDA holder onto a handle bar, or in a fork lift with cylindricial shaped beams in the roll bar.
The extra strong Pipe Mounts fi t both round and oblong bars. The mount is easily placed and fi ts very tightly; perfect for mounting in heavy duty vehicles or where road conditions are rough. Three versions available, two with fi xed mounting plate for device holder and one with a fully adjustable tilting arm (tilts 210° and rotates 360°). The mount fi ts round bars between 22 mm and 31 mm and oblong bars between 19x25 mm and 22x35 mm.
Item no. Features215664 Mounting plate: 50x42 mm.215665 Mounting plate: 160x50 mm.215666 Mounting plate angled 45°.215667 Mounting plate angled 90°.
Item no. Features215792 Swiveling mounting plate, 50x42 mm215793 Fixed mounting plate, 50x42 mm, predrilled AMPS holes215794 Fixed mounting plate, 50x42 mm, holes for nut and bolt
Item no 215664
Item no 215792
Item no 215793
Item no 215666
Standard Pipe Mount
Extra strong Pipe Mount
11
Sets: Cable Entry MountsWith swiveling top
Item no. 215633
Item no. 215629
Item no. 215637 Item no. 215643
ca 345°ca 345°
Complete set of Pedestal Mount, Angled Top Part and MultiMoveClip. The swiveling top is perfect for use on store counter tops, or any other situation where you might need to rotate the mounted device. Choose between three heights and six different angled top parts. Available in black and white.
Item no. 216634
Item no. 216629
Black White Black White Black White
Item no. 215629 216629 215635 216635 215641 216641
Item no. 215630 216630 215636 216636 215642 216642
Item no. 215631 216631 215637 216637 215643 216643
Item no. 215632 216632 215638 216638 215644 216644
Item no. 215633 216633 215639 216639 215645 216645
Art. nr. 215634 216634 215640 216640 215646 216646
115 mm 165 mm 215 mm
15°
30°
45°
60°
75°
90°
Height of Pedstal
Ang
le o
f top
par
t
12
Sets: Cable Entry MountsWith fi xed top
Item no. 215612
Item no. 216615
Item no. 216619Item no. 215625
Item no. 215614
Complete set of Pedestal Mount, Angled Top Part and MultiMoveClip. Easily switch device holders with the MultiMove- Clip. Have a steady mount with the fi xed Pedestal Mount. Choose between three lengths and six different angled top parts. Available in black and white.
Black White Black White Black White
Item no. 215611 216611 215617 216617 215623 216623
Item no. 215612 216612 215618 216618 215624 216624
Item no. 215613 216613 215619 216619 215625 216625
Item no. 215614 216614 215620 216620 215626 216626
Item no. 215615 216615 215621 216621 215627 216627
Art. nr. 215616 216616 215622 216622 215628 216628
100 mm 150 mm 200 mm
15°
30°
45°
60°
75°
90°
Height of Pedestal
Ang
le o
f top
par
t
13
Parts: Cable Entry MountsItem no. Product Total height215564 Pedestal Mount 4” - Black 100 mm215565 Pedestal Mount 6” - Black 150 mm215566 Pedestal Mount 8” - Black 200 mm
216564 Pedestal Mount 4” - White 100 mm216565 Pedestal Mount 6” - White 150 mm216566 Pedestal Mount 8” - White 200 mm
Item no. Product Total height215572 Swiveling Pedestal Mount 4,5” - Black 115 mm215573 Swiveling Pedestal Mount 6,5” - Black 165 mm215574 Swiveling Pedestal Mount 8,5” - Black 215 mm
216572 Swiveling Pedestal Mount 4,5” - White 115 mm216573 Swiveling Pedestal Mount 6,5” - White 165 mm216574 Swiveling Pedestal Mount 8,5” - White 215 mm
Outer diameter 64 mm
Inner diameter 24,5 mm
Total height
4 sets of AMPS-holes on top part6 holes on bottom part
5xAMPS-holes on top partTop part swivels ca 345°6 holes on bottom part
14
Parts: Cable Entry Mounts
Black - 215568White - 216568Angle: 15°
Black - 215569White - 216569Angle: 30°
Black - 215570White - 216570Angle: 45°
Black - 215571White - 216571Angle: 60°
Black - 215595White - 216595Angle: 75°
Black - 215596White - 216596Angle: 90°
Angled top partAngled top to mount holder onto. Perfect for mounting your solution at an angle. A holder with tilt swivel still allows for ad-justing the angle of the holder and switch between portrait and landscape mode.
Fits only with Pedestal Mount for cable entry. Four holes for mounting on top part of Pedestal Mount. Dual AMPS-holes for mounting of device holder. 2 sets of 4 screws included. Available in black and white.
Pedestal Mount top part with an attaching plate. On the attaching plate you can fasten your device or Brodit holder of choi-ce. Available with two different attaching plates. The plate can be turned 180°. Fits onto Pedestal Mounts for Cable Entry.
Item no. Product215717 Top Part with 180° turnaround With AMPS hole pattern, locking with handle.215741 Top Part with 180° turnaround With RAM Mount hole pattern, locking with handle.215742 Top Part with 180° turnaround With AMPS hole pattern, locking with Allen Key.
Top Part with Adjustable Mounting Plate
Item no. 215742
Item no. 215741 Item no. 215717
15
Accessories: Cable Entry MountsMultiMoveClip
Mounting Plate
Item no 215668MultiMoveClip - Black
Item no 216668MultiMoveClip - White
Fits all Brodit holders with tilt swivel. Perfect for a fi rm installation that still allows usage of different device holders on the same Pedestal Mount. Switch easily between holders in seconds.
For added stability when attaching the Pedestal Mount on its designated place. May also help spread the strain of the mounting surface when spreading the hole pattern over a larger area. On the bottom there is a milled canal for routing a charging cable through and up on the inside of the Pedestal Mount to the unit mounted on top.
Item no. Color Diameter215597 Black 100 mm215598 Black 150 mm215599 Black 200 mm
216597 White 100 mm216598 White 150 mm216599 White 200 mm
Item no 215538MultiMoveClip, High strength - Black
Item no 215699MultiMoveClip - black, High strength, easy open.
Item no 215718MultiMoveClip - black, High strength, easy open.
16
Strong and fi rm installationBrodit Pedestal Mounts is a mounting system for heavier devices which require a stable and strong installation. The Pedestal Mounts provide an extra sturdy and secure mounting platform which can be used in a variety of vehicles. In addition to vehicles and commercial equipment the Pedestal Mounts can also be used on virtually any fl at surface. On the Pede-stal Mounts you can attach any Brodit holder, giving vast possibilities of product categories to be mounted.
There are two main types of Pedestal Mounts; adjustable and fi xed. The adjustable Pedestal Mounts provides a bit more fl exibility in how you want your mounting solution to look, and is easily fi tted into a fork lift, truck, tractor or any similar vehicle. The fi xed Pedestal Mounts comes with or without a swiveling top. The fi xed Pedstal Mounts are perfect for use on store counters, display stands or perhaps in a boat.
It is easy to compile a unique solution for your own requirements. The adjustable Pedestal Mounts consist of different parts that are screwed together. The teeth within the interlocking joints provide a very strong hold; once screwed together the products can withstand a lot of weight. For both the adjustable and the fi xed Pedestal Mounts you can choose between already made sets or individual pieces to mix and match the parts to create the exact solu-tion needed.
The pedestal mounts are made of aluminum, a material which promises extremely strong and durable products of low weight. Brodit can develop new solutions for specifi c needs upon request.
2311
52 6
13 ©
2016
Bro
dit A
B w
ww
.bro
dit.c
om
Very strong construction Supports heavy devices Provides a fi rm installation Create your own solution Easily disassembled Made of aluminum Made in Sweden Color: black and white
Don’t hesitate to contact us for further information:
www.brodit.com
