Brochure RISPOSTA A4 Inglese
-
Upload
stefano-ambrosini -
Category
Documents
-
view
217 -
download
0
Transcript of Brochure RISPOSTA A4 Inglese
www.rispostaserramenti.it
www.rispostaserramenti.it
3
– company – a PVC doors and windows manufacturer - was established in the 90’s by the Rossi family and since then has been exclusively manufacturing PVC doors and windows. The company philosophy has been maintained constant throughout time and is based on these principles:
◗ Quality at every level, from the components of the machines to the continual professional retraining of the workforce. The quality control is very strict and effi cient and is carried out on 100% of the production.
◗ Rigorous commercial ethics.
◗ Constant attention to the needs of the market, at times anticipating such needs and creating new standards of reference.
◗ Respect for the client that is expressed by punctuality in the execution of orders, absolute adherence to the regulations in force and completely satisfying the requests of the technical and aesthetic features of our doors and windows.
All of this has brought the company today to production that is carried out in a very modern site that takes over 10,000 sq.m, of which 3,000 sq.m is dedicated to production, 1,000 sq.m to the warehouses for raw materials and the fi nished products, 900 sq. m for offi ces and 6,500 sq.m for the loading area. The working environment is spacious, bright and safe; all the machinery uses state-of-the-art European technology and is run by an enthusiastic and professionally mature workforce inside the Company while the designing takes advantage of the most sophisticated dedicated software. With these prerequisites our market is expanding naturally and today covers all of Italy with a large network of retained vendors. In short, it is a modern company that has never stopped growing and looks to the future while keeping intact the constant search for full satisfaction of the client.
««
Different solutions Different solutions for door and window framesfor door and window frames
5
www.rispostaserramenti.it
versatile, elegant and practical
Particularly versatile, door and window frames fi t in perfectly in modern
as well as restored buildings.With the use of multiple technical
and design solutionsdoors and windows can bring
out the aesthetic features of any residence.Our proposals stand out in the market
for their high standard of quality and functionality and guarantee consistent
performance over time to the fi nal user.
««
7
www.rispostaserramenti.it
TABLE OF CONTENTS
The ideal window frame
The life cycle
The 10 Fundamental steps before deciding on purchase
Seventy Gold window frame
Seventy Platinum window frame
Eighty window frame
Eighty Plus window frame
Eighty Plus window frame with Alu Clip
Eighty Plus Passive House window frame
AluFusion window frame
Windows and French doors
Parallel slide door frame
Lift and slide door frame
Pivot window
Porch and window frames
Comfort and anti-intrusion hardware
Concealed hardware
MAICO hardware
Safety front door
Capri - Ischia shutters
Grado - Olbia shutters
Rolling shutter boxes
Our Production
Colours
Handles
Pag. 8
Pag. 10
Pag. 12
Pag. 14
Pag. 18
Pag. 22
Pag. 26
Pag. 30
Pag. 32
Pag. 34
Pag. 38
Pag. 40
Pag. 42
Pag. 44
Pag. 46
Pag. 48
Pag. 50
Pag. 52
Pag. 54
Pag. 58
Pag. 60
Pag. 62
Pag. 64
Pag. 66
Pag. 68
Effi cient thermal insulation for notable energy saving: PVC is a good thermal insulation material: for this reason a frame is a perfect membrane between the outside and the inside of the building for maximum and minimum temperatures. A notable reduction in consumption of energy by air-conditioning and heating systems is achieved.
Elevated acoustic insulation: door andwindow frames are strong barriers to external noise pollution as the multi-chamber profi le stops sound waves and the gaskets absorb the vibrations of the glass.
Perfect resistanceto weather: door and window frames have high resistance to driving rain, to strong winds and good air tightness as shown by the classes below:
◗ Air tightness: class 4 (acc. to EN 12207)◗ Water tightness: class 9A (acc. to EN 12208)◗ Wind load resistance: class C5 (acc. to EN 12210)
Complete absence of maintenance:A frame does not need any ordinary maintenance, is easy to clean, a little water and neutral soap is enough to bring it back to new, it has perfect resistance to atmospheric agents (like smog, UV rays, etc...) and has absolutely no need of periodic varnishing like other materials do.
Made-to-measure elegance: A frame can fi t perfectly into any type of architectural style and always meets the requirements of the client thanks to the vast range of models available for a wide choice and due to our personalised design.
Respect for natural resources: T h e p ro f i le s u s e d fo r frames reduce the use of precious raw materials, energy and other materials. The ecological stabilisers are based on calcium and zinc.
The ideal The ideal door door
and window and window framesframes
==
9
www.rispostaserramenti.it
The total replacement of lead in the productive cycle of raw materials is an important and essential requisite in the making of door and window frames. With the Greenline line, a new chapter in the production of profi les was started. All profi les in PVC used by are characterised by the use of an ecological chemical stabiliser based on calcium and zinc which gives them excellent properties in terms of look, practicality and durability. The decision taken by o completely exclude profi les stabilised with heavy metals in the productive process explains why more and more designers, builders and clients choose the products marked with Greenline brand.
Vinyl 2010
Respect for the Vinyl 2010 voluntary
commitment of the European Union
by the PVC industries to reach a
level of sustainable development,
includes specific objectives and
guiding principles, such as control
of CO2 emissions during production
and recycling of PVC and therefore
the replacement of stabilisers
containing lead.
Greenline windows in lead-free PVC
An industrial system and its products are compatible with the environment when they satisfy their needs and require-ments without compromising them. Analysis of the life cycle is a method of evaluation of energy and environmental loads associated with a product along its entire life cycle outlined as below.
The ISO 14040 standard supplies the frame-work of reference to follow to comply with this. The main indicators on a study of the life cycle are essentially of two types:
◗ ENERGETIC: This is the consumption of energy needed to produce a functional unit (in this case a specifi c model of frame or shutter). It is expressed in GER parameters (Gross Energy Requirement) that shows the overall demands of energy in MJ;
◗ ENVIRONMENT: This shows the consump-tion of natural resources, emissions into air and water and the solid refuse produced, again in reference to that generated by the functional unit. The GWP100 (Global Warm-ing Potential that is the potential green-house effect at 100 years) is expressed in Kg of CO2.
Now we can examine the methodology and the results of the studies relating to PVC window and door frames basically following this outline.
Regarding door and window frames the analysis method has been applied to the system related to the transparent closures made of:
◗ PVC◗ PRIMARY ALUMINIUM ◗ WOOD
The study has analysed three phases: 1 the productive phase, 2 the phase of use and 3 the end of life of a specifi c functional unit, that is, a window with the following characteristics:
◗ Dimension 120 x150 cm (width per height)◗ Glass with thermal transmittance Ug equal to 1.1 W/(m²K)◗ Single casement ◗ 30 years of useful life
The Life Cycle
RAW MATERIALS
ENERGY
INTERMEDIATETRANSPORT
FINISHED PRODUCT
PRODUCTION OF WINDOWProduction of raw material
Process of window mounting
PHASE OF WINDOW USEOrdinary maintenance
Thermal performance
END OF LIFE Recycling
Recuperation of energy
REFUSE
WASTE
WA
STE
AW MATERIAL EXTRACTION((e.g. iron mineral – energy raw materials)
FIRST PROCESSING PHASE(e.g. primary steel production)
SECOND PROCESSING PHASE(e.g. lamination)
THIRD PROCESSINGPHASE(e.g. steel postfor transportationand/or lighting)
DISTRIBUTION INSTALLATION AND SETUP
USE AND MAINTENANCE
PHASE
POSSIBLE RECYCLING OPERATIONS
UTILITY
11
www.rispostaserramenti.it
The results as shown by tables 1, 2 and 3 show the optimum performance of PVC both in terms of the GER as well as the GWP (Tables 1 and 3) and a value of Kg of CO2 considerably better for wood and PVC than that of aluminium (table 2).
44000
40000
32000
36000
28000
24000
16000
20000
12000
8000
0
4000
- 4000
- 8000
MJ
Table 1
269900
1110
-700
250000
1900
-1000
340000
43004300
-4000
GER production GER end of lifeGER phase of use GER maintenance
151500
00
WOOD PVCPRIMARIMARY
ALALUMINIUM
Table 1 summarises the energy requirement (GER) of the three phases considered (production, use and end of life) of a specifi c “functional unit” expressed in mega joule (MJ) (J measures the necessary work to exercise a force of 1 MJ = 106 J). The GER of the functional unit in PVC was the lowest of the three.
Table 2 shows the contribution of GWP in each phase (expressed in Kg of CO2 per functional unit). Also in this case the values of PVC are lower.
Table 3 compares the overall GWP of the three frames examined in the three phases expressed in Kg of CO2 per functional unit.
TYPE OF WINDOW GER (MJ/window unit) GWP(kg CO2 - eq./window unit)
Wood 27200 1800
PVC 25900 1750
Primary aluminium 34300 2350
2800
2000
2400
1600
1200
400
800
0
- - 400
OKg
CO²²
Table 2
18800
40
-30
17700
110
-80
232300
270
-220
GER pproduction f lifeGER end of GER phase of use GER maintenance
0,600 60
00
00
WOOD PVCPRIMARY
ALUMINIUM
25000
1500
2000
1000
500
0
Kg C
O²
Table 3
18001750
2350
WOOD PVCCMARY PRIMARY
ALUMINIUMALU
In the last table regarding the window frames the GER and GWP associated to the entire life cycle are shown, standardised to a single frame having dimensions of 120x150 cm, insulated glass pane 4/15/4 fi lled with low emissivity Argon
The abovementioned data, without further explanation, is enough to demonstrate the full commitment of to environmental protection.
To have suitable door and window frames, conforming to regulation and eco-sustainable, here is the documentation that you need for buying the windows and that the supplier must give you even at the proposal stage!
The 10 fundamental steps before......deciding on purchase
1 CE markingCE marking is obligatory and the performance values defi ne the quality product. Thermal performance and air tightness must be indicated on the CE label of every single window frame contained in the order; the labels can be applied to the frame or sent as a document attached (a label for each window, even if they are all equal). It is not obligatory to show the values of the acoustic performance, wind and water resistance. The option NPD (No performance determined) does not guarantee that the product installed respects the national regulations that are superior to those called for with the CE marking. Even where NPD is indicated, it is recommended that you request the values, especially those of wind resistance for large window frames (static calculation).
2 Certifi cate of Conformity of PVC profi le The certificate identifies the profiles as Class S. According to the standard EN 12608 Class S is obligatory in Italy. This certifi cation attests that the profi les are resistant to radiation at severe climate. Windows made with Class M profi les do not conform for use in Italy but only for less sunny climates of Northern Europe.
3 Declaration of conformity to the standard EN 14351- 1/CEDocument drawn up in Italian that states the name and address of the manufacturing company of the windows as well as the declaration number, the order number, the year and the ITT certifi cate of the order itself.
4 Instructions for correct use, maintenance and care of frames Information for the basic maintenance, cleaning and correct preservation for functioning of window frames.
5 Product warranty By law, the warranty cannot be for less than two years and is issued by the company that sells the product. The warranty must clearly describe the types of faults and defects it covers, the type of intervention offered and the duration of the warranty.
6 Declaration of “energy performance” of the window frames This is to be issued in case of any fiscal incentive providing for 55% or 36% deduction from taxes related to restoration works. However, it is worth asking for the declaration in any case.
7 Declaration of conformityof glass to CE marking This is to be issued in case of any fiscal incentive providing for 55% or 36% deduction from taxes related to restoration works; this certifi cate states the performance values of the glass and the composition of the window pane. Remember that according to Italian legislation for glass safety (UNI 7697) when the glass pane is applied at a level lower than one metre from the ground, a double layer of safety glass must be used (stratifi ed glass).
8 Certifi cate of Origin and Certifi ed and Guaranteed ProductionThis certificate guarantees that the product is of Italian origin and it is issued by Profine Italia to the company which has an exclusively Italian production carried out in conformity with the Profi ne manufacturing guidelines and which has correct internal management for CE marking (assessed after specifi c audits).
9 Greenline Certifi cate of sustainability Issued by Profine to its partners, this document certifi es that the windows are made of eco-sustainable PVC, lead free, with ecological formulation of Calcium-Zinc and 100% recyclable.
10 Certifi cation of use of Metallic Supports exempt from radioactive contamination Document issued by the supplier of metallic supports that certifies the absence of radioactivity in the metal supports used in manufacturing the frames. Regulation by the European Directive 2006/117/Euratom.
13
www.rispostaserramenti.itp
CCeerrttiiffiiccaattoo ddii QQUUAALLIIFFIICCAA
rreellaattiivvaa aaii pprrooffiillii eessttrruussii
NNoorrmmaa EENN 1122660088// EENN 1144335511--11 CCEE
La elevata competenza ed esperienza nei processi di estrusione e di
preparazione delle mescole permette a PROFINE di distribuire prodotti
di elevatissima qualità garantendone le caratteristiche e le prestazioni,
nel rigoroso rispetto delle norme Europee ed Internazionali.
Con questa impostazione di base, PROFINE garantisce che:
Tutti i processi di produzione delle materie prime, dei profili estrusi,
e del riciclaggio, non producono alcun inquinamento ambientale.
Tutti i profili dei propri sistemi sono estrusi con stabilizzanti
ecologici a base di Calcio-Zinco, esenti da Piombo e
completamente riciclabili. Anche il prodotto immesso nel ciclo
produttivo come riciclato è unicamente a base di Calcio-Zinco. Il
marchio “greenline” ne attesta tale caratteristica.
Tutti i profili estrusi, nel rispetto di quanto richiesto dalla Norma EN
12608, riferimento per la EN 14351-1 relativa al marcatura CE,
rientrano nella Classe S (idonei per irraggiamento e clima
severo), con valore di 12 GJ/m2. Classe S richiesta per il mercato
italiano. La marcatura CE, per tutto il territorio nazionale, richiede profili in Classe S.
Scheda tecnica del prodotto, con tutte le caratteristiche, disponibile a richiesta.
profine Italia srl
I - Via Nazionale, 601 - 45033 Bosaro (RO)
Tel: +39 0425 466811 fax: +39 0425 466838
Info profine-group.com - www.profineitalia.it
Classe S (12 GJ/m2)
______________________
CLIMA SEVERO - ITA EN 12608
EN 14351-1 CE
profine Italia srl
zionale, 601 - 45033 Bosaro (RO)
811 fax: +39 0425 466838
www.profineitalia.it
EN 12EN 14351-1 CE
Certifi cations
Produzione Certificata e Garantita
CERTIFICATO DI ORIGINE
Profine Italia srl
Certifica che la società
RISPOSTA snc
Con sede di produzione in 25013 Carpenedolo (BS) – Località Taglie, 18 - ITALIA
Utilizza profili dei sistemi profine del marchio Kömmerling, accessori e rinforzi per serramenti controllati e
certificarti da profine. Garantisce che la produzione di RISPOSTA snc avviene esclusivamente in Italia nello
stabilimento ad indirizzo sopra riportato e seguendo le direttive di fabbricazione di profine_Kömmerling,
secondo le norme europee di riferimento. Certifica che la gestione ed il rispetto delle procedure per la
marcatura CE sono attuate, come da audit eseguito in data riportata in calce.
Il logo qui sopra riportato può essere applicato sui serramenti di produzione RISPOSTA snc, per assicurare
l’Origine e la Produzione Certificata e Garantita .
Il codice aziendale della società RISPOSTA snc è RI.205
Data audit di produzione: 12.10.2011
Validità certificato P.C.G. : 23.10.2012 Direzione profine: _______________________
P.C.G. PROFINE
RI.205 – ITALIA
Sash Profi le
Frame Profi le
Glazing
Gasket on frame
Gasket on sash
Frame reinforcement
Sash reinforcement
Glazing bead
2
3
4
5
6
7
1
8
2
3
4
5
6
7
1 8
Technical information
◗ Double rubber gasket profi le system, 70 mm deep, with 5 chambers and steel reinforcement.
◗ High resistance to driving rain, thanks to the 5° slope of pane groove, which assures water drainage to the outside without backfl ow
◗ Resistance classes:– air tightness: class 4 (according to EN 12207)– water tightness: class E1050 (according to EN 12208)– wind load resistance: class C2/B (according to EN 12210)
◗ UF value of the frame sash combination: 1.4 W/m2 K ◗ Profi les with marked curvature and smooth visible
corner fi ttings
Seventy Seventy Gold Gold
window framewindow frame
UF value of the frame sash combination: 1.4 W/m2 K
15
«The Seventy Gold window frame profi les greatly contribute to the harmony of the façade of any building».
«A refi ned design and the smooth, rounded corners make the window frame perfect for a large range of architectonic solutions».
«This new profi les system permits to achieve,
with just simple double glazing, the highest standards
required by energy saving rules».
«The Seventy Gold system can be fi tted with
glazing up to 39 mmin thickness»
www.rispostaserramenti.itSeventy Gold window frame
GLAZING TYPE UG UW LIGHT TRANSMITTANCE dB
4 + 15 Argon gas fi lled cavity + 4 low emissivity glass 1,1 W/m2 K 1,35 80% 31 ± 2
3/3.1 + 15 Argon gas fi lled cavity + 3/3.1 low emissivity glass 1,1 W/m2 K 1,35 78% 36 ± 2
4/4.1 + Silence + 15 Gas + 3/3.1 low emissivity glass 1,1 W/m2 K 1,35 77% 41 ± 2
4 + 15 gas + 4 Ultra One 1,0 W/m2 K 1,29 71% 29 ± 2
4 low-E glass + 12 Argon gas fi lled cavity + 4 Diamant +12 Argon gas fi lled cavity + 4 low emissivity glass 0,7 W/m2 K 1,12 72% 32 ± 2
3/3.1 low emissivity glass + 12 Gas + 4 Diamant + 9 Gas + 3/3.1 low emissivity glass 0,8 W/m2 K 1,17 70% 37 ± 2
4 Ultra One + 12 Argon Gas fi lled cavity+ 4 Diamant + 12 Argon Gas fi lled cavity + 4 Ultra One 0,7 W/m2 K 1,12 58% 31 ± 2
6/6.1 + Silence + 15 Gas + 4/4.2 Silence low emissivity glass 1,1 W/m2 K 1,35 75% 48 ± 2
Remarks: Values refer to a single casement window measuring W. 800 x 1500 H.
“Style”“Style”
17
Seventy Gold window frame systems
www.rispostaserramenti.itSeventy Gold window frame
Combination detailWINDOW SASH 0011 - FRAME 0502
Combination detailWINDOW SASH 011 – FRAME 0105
Combination detailDOOR SASH 0116 – FRAME 0502
Combination detailLARGE-PANED SASH 0514 – FRAME 0502
Combination detailDOOR SASH 0116
Kommerling threshold 9C42
SeventySeventyPlatinumPlatinum
window framewindow frame
UF value of the frame sash combination: 1.2 W/m2 K
Sash Profi le
Frame Profi le
Glazing
Gasket on frame
Gasket on sash
Frame reinforcement
Sash reinforcement
Glazing bead
Third Gasket
2
3
4
5
6
7
1
8
2
3
4
5
6
7
18
technical information
◗ 70 mm system with 5 chambers and central gasket.◗ High performance in driving rain, good water tightness.
◗ Resistance classes:– air tightness: class 4 (according to EN 12207)– water tightness: class 9A (according to EN 12208)– wind load resistance: class C5 (according to EN 12210)
◗ UF value of the frame sash combination: 1.2 W/m2 K
◗ Profi les with marked curvature and smooth visible corner fi ttings
9 9
19
«The refi ned design of the semi-coplanar system of the window frame perfectly answers to
new aesthetic canons».
«Not just aesthetic quality, but also technical performance: in fact it is
possible to use glazing of up to 39 mm in thickness».
«Making use of the most up-to-date thermal and acoustic insulated
panes it is possible to achieve the best technical performance also
thanks to the use of the 3 gaskets between sash and frame».
www.rispostaserramenti.itSeventy Platinum window frame
GLAZING TYPE UG UW LIGHT TRANSMITTANCE dB
4 + 15 Argon gas fi lled cavity + 4 low emissivity glass 1,1 W/m2 K 1,26 80% 31 ± 2
3/3.1 + 15 Argon gas fi lled cavity + 3/3.1 low emissivity glass 1,1 W/m2 K 1,26 78% 36 ± 2
4/4.1 + Silence + 15 Gas + 3/3.1 low emissivity glass 1,1 W/m2 K 1,26 77% 41 ± 2
4 + 15 gas + 4 Ultra One 1,0 W/m2 K 1,2 71% 29 ± 2
4 low emissivity glass + 12 Argon gas fi lled cavity + 4 Dia-mant +12 Argon gas fi lled cavity + 4 low emissivity glass 0,7 W/m2 K 1,02 72% 32 ± 2
3/3.1 low emissivity glass + 12 Gas + 4 Diamant + 9 Gas + 3/3.1 low emissivity glass 0,8 W/m2 K 1,08 70% 37 ± 2
4 Ultra One + 12 Argon gas fi lled cavity + 4 Diamant + 12 Argon gas fi lled cavity + 4 Ultra One 0,7 W/m2 K 1,02 58% 31 ± 2
6/6.1 + Silence + 15 Gas + 4/4.2 Silence low emissivity glass 1,1 W/m2 K 1,26 75% 48 ± 2
Remarks: Values refer to a single casement window measuring W 800 x 1500 H.
“Harmony”“Harmony”
21
www.rispostaserramenti.itSeventy Platinum window frame
Seventy Platinum window frame systems
Combination detailWINDOW SASH 2611 - FRAME 2602
Combination detailWindow sash 2611 – Frame 2605
Combination detailLARGE-PANED SASH 2613 - FRAME 2602
Combination detailLARGE-PANED SASH 2613
Kommerling threshold 9C42
Combination detailWINDOW SASH 2611
Kommerling threshold 9C42
Sash Profi le
Frame Profi le
Glazing
Gasket on frame
Gasket on sash
Frame reinforcement
Sash reinforcement
Glazing bead
Third Gasket
2
3
4
5
6
7
1
8
2
3
4
5
6
7
18
Technical information
◗ 80 mm system with 6 chambers and central gasket.◗ High performance in driving rain, good water tightness.
◗ Resistance classes:– air tightness: class 4 (according to EN 12207)– water tightness: class 9A (according to EN 12208)– wind load resistance: class C5 (according to EN 12210)
◗ UF value of the frame sash combination: 1.1 W/m2 K
◗ Profi les with marked curvature and smooth visible corner fi ttings
9 9
EightyEighty window frame window frame
UF value of the frame sash combination: 1.1 W/m2 K
23
«The Eighty system can be fi tted with glazing of up to
39 mm thickness».
«The window frame that reaches
the highest levels of thermal and acoustic insulation required
by the market».
«Its design with the smooth and round corners makes the
window frame perfect for any architectonic
solutions».
www.rispostaserramenti.itEighty window frame
GLAZING TYPE UG UW LIGHTTRANSMITTANCE dB
4 + 15 Argon gas fi lled cavity + 4 low emissivity glass 1,1 W/m2 K 1,22 80% 31 ± 2
3/3.1 + 15 Argon gas fi lled cavity + 3/3.1 low emissivity glass 1,1 W/m2 K 1,22 78% 36 ± 2
4/4.1 + Silence + 15 Gas + 3/3.1 low emissivity glass 1,1 W/m2 K 1,22 77% 41 ± 2
4 + 15 gas + 4 Ultra One 1,0 W/m2 K 1,16 71% 29 ± 2
4 low emissivity glass + 12 Argon gas fi lled cavity + 4 Dia-mant +12 Argon gas fi lled cavity + 4 low emissivity glass 0,7 W/m2 K 0,99 72% 32 ± 2
3/3.1 low emissivity glass + 12 Gas + 4 Diamant + 9 Gas + 3/3.1 low emissivity glass 0,8 W/m2 K 1,04 70% 37 ± 2
4 Ultra One + 12 Argon gas fi lled cavity + 4 Diamant + 12 Argon gas fi lled cavity + 4 Ultra One 0,7 W/m2 K 0,99 58% 31 ± 2
6/6.1 + Silence + 15 Gas + 4/4.2 Silence low emissivity glass 1,1 W/m2 K 1,22 75% 48 ± 2
Remarks: Values refer to a single casement window measuring W 800 x 1500 H.
“Imagination”“Imagination”
25
Eighty window frame systems
www.rispostaserramenti.itEighty window frame
Combination detailWINDOW SASH 2611 - FRAME 2607
Combination detailLARGE-PANED SASH 2613 - FRAME 2607
Sash Profi le
Frame Profi le
Glazing
Gasket on frame
Gasket on sash
Frame reinforcement
Sash reinforcement
Glazing bead
Third Gasket
2
3
4
5
6
7
1
8
2
3
4
5
6
7
1 8
Technical information
◗ 88 mm system with 6 chambers and central gasket.◗ High performance in driving rain, good water tightness.
◗ Resistance classes:– air tightness: class 4 (according to EN 12207)– water tightness: class 9A (according to EN 12208)– wind load resistance: class C5 (according to EN 12210)
◗ UF value of the frame sash combination: 1.0 W/m2 K
◗ Profi les with marked curvature and smooth visible corner fi ttings
◗ Anti-burglary test - Burglar resistance class: WK2◗ Wide glass support groove from 22 to 54 mm for fi tting
special glass
9
9
Eighty Eighty PlusPlus
window framewindow frame
UF value of the frame sash combination: 1.0 W/m2 K
27
«The creativity in the designing depends on the balance
between what is desirable and what is doable. The new generation
Eighty Plus window frames offer a wide range of solutions both
in terms of economy and of design»
«Regular step-like design in perfect
proportion to the sash and frame profi les, maximum
values of acoustic insulation and
anti-burglary protection».
www.rispostaserramenti.itEighty Plus window frame
GLAZING TYPE UG UW LIGHT TRANSMITTANCE dB
4 + 15 Argon gas fi lled cavity + 4 low emissivity glass 1,1 W/m2 K 1,18 80% 31 ± 2
3/3.1 + 15 Argon gas fi lled cavity + 3/3.1 low emissivity glass 1,1 W/m2 K 1,18 78% 36 ± 2
4/4.1 + Silence + 18 Gas + 3/3.1 low emissivity glass 1,1 W/m2 K 1,18 77% 41 ± 2
4 + 15 gas + 4 Ultra One 1,0 W/m2 K 1,12 71% 29 ± 2
4 low emissivity glass + 12 Argon gas fi lled cavity + 4 Dia-mant +12 Argon gas fi lled cavity + 4 low emissivity glass 0,7 W/m2 K 0,94 72% 32 ± 2
3/3.1 low emissivity glass + 12 Gas + 4 Diamant + 9 Gas + 3/3.1 low emissivity glass 0,8 W/m2 K 1,00 70% 37 ± 2
4 Ultra One + 12 Argon gas fi lled cavity + 4 Diamant + 12 Argon gas fi lled cavity + 4 Ultra One 0,7 W/m2 K 0,94 58% 31 ± 2
6/6.1 + Silence + 15 Gas + 4/4.2 Silence low emissivity glass 1,1 W/m2 K 1,18 75% 48 ± 2
4 low emissivity glass + 18 gas + 4 Diamant +18 gas + 4 low emissivity glass 0,5 W/m2 K 0,82 72% 32 ± 2
4 Ultra One + 18 gas + 4 Diamant + 18 gas + 4 Ultra One 0,5 W/m2 K 0,82 58% 32 ± 2
Remarks: Values refer to a single casement window measuring W 800 x 1500 H.
“Emotion”“Emotion”
29
Eighty Plus window frame systems
www.rispostaserramenti.itEighty Plus window frame
Combination detailWINDOW SASH 6211 - FRAME 6201
Combination detailDOOR SASH 6216 – FRAME 6201
Combination detailWINDOW SASH 6211 – REBATE SECTION 6307
Sash Profi le with Alu Clip
Frame Profi le with Alu Clip
Glazing
Gasket on frame
Gasket on sash
Frame reinforcement
Sash reinforcement
Glazing bead
Third Gasket
2
3
4
5
6
7
1
82
3
45
6
7
1 8
Technical information
◗ 88 mm system with 6 chambers and central gasket.◗ High performance in driving rain, good water tightness.
◗ Resistance classes:– air tightness: class 4 (according to EN 12207)– water tightness: class 9A (according to EN 12208)– wind load resistance: class C5 (according to EN 12210)
◗ UF value of the frame sash combination: 1.1 W/m2 K
◗ Profi les with marked curvature and smooth visible corner fi ttings. Classic line
◗ Anti-burglary test - Burglar resistance class: WK2◗ Wide glass support groove from 22 to 54 mm for fi tting
special glass
99
Eighty Plus Eighty Plus window frame window frame
with with Alu ClipAlu Clip
UF value of the frame sash combination: 1.1 W/m2 K
31
Aluminium and PVC.Refi ned and elegant look with excellent thermal insulation.
This combination enhances the strong points of the two materials and meets the requirements for these types of window and door frames.
GLAZING TYPE UG UW LIGHTTRANSMITTANCE dB
4 + 15 Argon gas fi lled cavity + 4 low emissivity glass 1,1 W/m2 K 1,23 80% 31 ± 2
3/3.1 + 15 Argon gas fi lled cavity + 3/3.1 low emissivity glass 1,1 W/m2 K 1,23 78% 36 ± 2
4/4.1 + Silence + 18 Gas + 3/3.1 low emissivity glass 1,1 W/m2 K 1,23 77% 41 ± 2
4 + 15 gas + 4 Ultra One 1,0 W/m2 K 1,16 71% 29 ± 2
4 low emissivity glass + 12 Argon gas fi lled cavity + 4 Dia-mant +12 Argon gas fi lled cavity + 4 low emissivity glass 0,7 W/m2 K 0,93 72% 32 ± 2
3/3.1 low emissivity glass + 12 Gas + 4 Diamant+ 9 Gas + 3/3.1 low emissivity glass 0,8 W/m2 K 1,01 70% 37 ± 2
4 Ultra One + 12 Argon gas fi lled cavity + 4 Diamant + 12 Argon gas fi lled cavity + 4 Ultra One 0,7 W/m2 K 0,93 58% 31 ± 2
6/6.1 + Silence + 15 Gas + 4/4.2 Silence low emissivity glass 1,1 W/m2 K 1,23 75% 48 ± 2
4 low emissivity glass + 18 gas + 4 Diamant +18 gas + 4 low emissivity glass 0,5 W/m2 K 0,78 72% 32 ± 2
4 Ultra One + 18 gas + 4 Diamant + 18 gas + 4 Ultra One 0,5 W/m2 K 0,78 58% 32 ± 2
Remarks: Values refer to a single casement window measuring W 800 x 1500 H.
“Strong combination for low energy consumption”
www.rispostaserramenti.itEighty Plus window frame with Alu Clip
Combination detailWindow sash 6211 - frame 6201
with Alu Clip covers
Sash Profi le
Frame Profi le
Glazing
Gasket on frame
Gasket on sash
Frame insulation
Sash insulation
Glazing bead with insulation
Third Gasket
2
3
4
5
6
7
1
82
3
4
5
6
7
18
Technical information
◗ 88 mm system with 6 chambers and central gasket.◗ High performance in driving rain, good water tightness.
◗ Resistance classes:– air tightness: class 4 (according to EN 12207)– water tightness: class 9A (according to EN 12208)– wind load resistance: class C5 (according to EN 12210)
◗ UF value of the frame sash combination: 0.8 W/m2 K
◗ Profi les with marked curvature and smooth visible corner fi ttings
◗ Anti-burglary test - Burglar resistance class: WK2◗ Wide glass support groove from 22 to 54 mm for fi tting
special glass
99
Eighty PlusEighty Plus Passive Passive HouseHouse
window framewindow frame
UF value of the frame sash combination: 0.8 W/m2 K
33
The request for thermal insulation has strongly infl uenced the style of the window profi les especially as far as the passive house is concerned.
Thanks to modern technology and extensive research concerning design, construction and production, it has been possible to meet and include all the needs in a single result.
GLAZING TYPE UG UW LIGHTTRANSMITTANCE dB
4 + 15 Argon gas fi lled cavity + 4 low emissivity glass 1,1 W/m2 K 1,10 80% 31 ± 2
3/3.1 + 15 Argon gas fi lled cavity + 3/3.1 low emissivity glass 1,1 W/m2 K 1,10 78% 36 ± 2
4/4.1 + Silence + 18 Gas + 3/3.1 low emissivity glass 1,1 W/m2 K 1,10 77% 41 ± 2
4 + 15 gas + 4 Ultra One 1,0 W/m2 K 1,04 71% 29 ± 2
4 low emissivity glass + 12 Argon gas fi lled cavity + 4 Dia-mant +12 Argon gas fi lled cavity + 4 low emissivity glass 0,7 W/m2 K 0,86 72% 32 ± 2
3/3.1 low emissivity glass + 12 Gas + 4 Diamant + 9 Gas + 3/3.1 low emissivity glass 0,8 W/m2 K 0,92 70% 37 ± 2
4 Ultra One + 12 Argon gas fi lled cavity + 4 Diamant + 12 Argon gas fi lled cavity + 4 Ultra One 0,7 W/m2 K 0,86 58% 31 ± 2
6/6.1 + Silence + 15 Gas + 4/4.2 Silence low emissivity glass 1,1 W/m2 K 1,10 75% 48 ± 2
4 low emissivity glass + 18 gas + 4 Diamant +18 gas + 4 low emissivity glass 0,5 W/m2 K 0,74 72% 32 ± 2
4 Ultra One + 18 gas + 4 Diamant + 18 gas + 4 Ultra One 0,5 W/m2 K 0,74 58% 32 ± 2
Remarks: Values refer to a single casement window measuring W 800 x 1500 H.
A new window design for a “passive house”
www.rispostaserramenti.itEighty Plus Passive House window frame
Combination detailWindow sash 6211 - frame 6201
Insulated for passive house
Sash Profi le
Frame Profi le
Glazing
Gasket on frame
Gasket on sash
Frame reinforcement
Cover on frame
Aluminium Glazing bead
2
3
4
5
6
7
1
8
2
3
45
6
7
18
Technical information
◗ 70 mm system with 6 chambers thanks to the inclined steel reinforcement
◗ High performance in driving rain, good water tightness.
◗ Resistance classes:– air tightness: class 4 (according to EN 12207)– water tightness: class 9A (according to EN 12208)
– wind load resistance: class C5 (according to EN 12210)
◗ UF value of the frame sash combination: 1.3 W/m2 K ◗ Profi les with marked curvature and smooth corners in the
inner section and aluminium coating on the outer part. ◗ Use of glass with thickness up to 42 mm
AluFusion AluFusion window framewindow frame
UF value of the frame sash combination: 1.3 W/m2 K
www.rispostaserramenti.itAluFusion window frame
35
Referenzobjekt AluFusion
INNOVATIONApart from the classic function of aluminium finishing, the special characteristics of AluFusion also include the connection of the functional aluminium profile and the PVC profile without internal glazing blead.
Referenzobjekt AluFusion
ELEGANCE AND STYLEWith coplanar and semi-coplanar systems, AluFusion offers all the necessary qualities for creativity: a captivating look and unlimited range of colours.
MAXIMUM STABILITYThe aluminium profile has static functions, it is not necessary any more to have steel supports in sash profiles; this improves the already optimum features of thermal insulation that AluFusion possesses.
GLAZING TYPE UG UW LIGHTTRANSMITTANCE dB
4 + 15 Argon gas fi lled cavity + 4 low emissivity glass 1,1 W/m2 K 1,35 80% 31 ± 2
3/3.1 + 15 Argon gas fi lled cavity + 3/3.1 low emissivity glass 1,1 W/m2 K 1,35 78% 36 ± 2
4/4.1 + Silence + 15 Gas + 3/3.1 low emissivity glass 1,1 W/m2 K 1,35 77% 41 ± 2
4 + 15 gas + 4 Ultra One 1,0 W/m2 K 1,29 71% 29 ± 2
4 low emissivity glass + 12 Argon gas fi lled cavity + 4 Dia-mant +12 Argon gas fi lled cavity + 4 low emissivity glass 0,7 W/m2 K 1,12 72% 32 ± 2
3/3.1 low emissivity glass + 12 Gas + 4 Diamant + 9 Gas + 3/3.1 low emissivity glass 0,8 W/m2 K 1,17 70% 37 ± 2
4 Ultra One + 12 Argon gas fi lled cavity + 4 Diamant + 12 Argon gas fi lled cavity + 4 Ultra One 0,7 W/m2 K 1,12 58% 31 ± 2
6/6.1 + Silence + 15 Gas + 4/4.2 Silence low emissivity glass 1,1 W/m2 K 1,35 75% 48 ± 2
Remarks: Values refer to a single casement window measuring W 800 x 1500 H.
“Safety”“Safety”
37
ALUFUSION window frame systems
www.rispostaserramenti.itAluFusion window frame
Combination detailWINDOW SASH 620540 - FRAME 0502
Alu Clip 678007 – Alu Clip 9C02
Combination detailDOOR SASH 622540 – REBATE SECTION 632400
Alu Clip 678307 – Alu Clip 677707
Combination detailLARGE-PANED SASH 622240 - FRAME 0005
Alu Clip 678607 – Alu Clip 9C01
Windows and French doorsWindows and French doors
All windows and French doors are equipped with tilt/turn opening with a controlled ventilation system, anti-intrusion sash device, single pull handle with lower and upper safety pins for fi xed sash, symmetric upper and lower trend hinges.
Inward turn
opening
Inward tilt/turnopening
Tilt opening
Controlledventilation
Double casement window
French door Trapezoid window Arched window
39
www.rispostaserramenti.it
Large sized doors with locks
Ideal models for secondary exits where access from outside is needed. They differ from French doors with the application of sash profi les with a greater height necessary for fi tting the lock and the through-fi xing handle. The hinges used are the same as for the French doors. Closure is with the use of three point automatic lock; two hooks and a bolt moved centrally by a safety cylinder.
Parallel slide door frameParallel slide door frame
Tilting sliding door
The parallel-slide door system is a leaf frame that thanks to a sliding and transfer mechanism allows for tilt opening of the primary sash as well as sliding on a rail fitted to the frame. This mechanism, provided as standard device, allows for automatic coupling of the sash during the closure. This model is ideal for medium-sized frames which do not allow for turn opening of the sash due to its weight and dimensions.It is possible to fi t a through-fi xing handle.
41
www.rispostaserramenti.it
The parallel sliding door is uniquely designed with a four-sided frame; this guarantees optimum tightness performance.
Lift-slide door frameLift-slide door frame
Lift-slide door frame
The lift-slide frame is ideal for large glass windows that open out. The mechanism “Lift and Slide” guarantees slide opening and hold of the frame on very large surfaces with heavy sashes.
43
www.rispostaserramenti.it
The large glass windows guarantee elegance and light to the room. For this reason the lift-slide frames are the windows of choice for the more exclusive settings. The slide opening on rails instead of a turn opening allows one to take full advantage of the space in the room.
Pivot window Pivot window
Horizontal pivot window
Vertical pivot window
The pivot opening, rotating on a horizontal or vertical axis allows for opening of the windows and French doors with large-sized glazing, reducing any obstruction into the internal area to the minimum. The easy manoeuvrability is guaranteed by the hinge with rotating stops.
Rotation of up to 180° means that the glass is easy to clean when it is not accessible from the outside.
Due to the particular type of opening, the pivot window is not compatible with blinds, shutters, and manual mosquito nets.
45
www.rispostaserramenti.it
VERTICAL PIVOT WINDOWUsually there is the same application with this as for the horizontal pivot hinge but is used especially when the glazing is higher. Windows and French doors can also be made with the axis not in the mid-line.
HORIZONTAL PIVOT WINDOWThe windows with pivot hinges on a horizontal axis allow for large-sized glazing with development in width and reasonable ventilation even when it is raining. It also allows for good exchange of air with the hot, stuffy air going out of the upper opening and cool air coming into the lower part.
Ideal window Ideal window and door frames...and door frames...
Thanks to its many years of experience, the company designs, produces and installs ribbon windows, combined and curved frames that can be integrated perfectly into any architectonic contest, thereby creating real transparent walls and roofs.
for closure of porches for closure of porches and large windowsand large windows
47
www.rispostaserramenti.it
«Thanks to our staff we are able to guarantee better technical solutions to give the best thermal and acoustic insulation, creating a new atmosphere that is bright, cosy and completely insulated. This also contributes to increasing the harmony of the façade of your building».
Closure is with the use of three point automatic lock; two hooks and a bolt moved centrally by a safety cylinder.
Comfort hardwareComfort hardware
Hardware set for single casement window
Hardware set for double
casement window
«A fundamental part of the window is the hardware that completes it. window and door frames feature a two-position turn/tilt opening system, strike-plate and anti-burglary locking pin in the upper and lower part of the sash, locking points on both profi les, lift and mishandling device as standard supply, with a single lever handle for upper and lower anti-burglary pin of the fi xed sash. All this with the aim of assuring maximum comfort and good safety to the fi nal user».
49
www.rispostaserramenti.it
Anti-intrusion CR 2 hardware
CR 2 Hardware set for single casement window
CR 2 Hardware set
for double casement window
«On request the company can install a system of hardware called CR 2 on all its window and door frames. This system of hardware has been tested and guaranteed at European levels in anti-burglary class 2; it consists of multiple locking points; all the pins and strike-plates have anti-intrusion features».
Concealed hardwareConcealed hardware
The hardware is hidden to give place to the frame; the hinges disappear and put the profi le with rounded corners in fi rst place. Simple lines and an angle that can open up 100% to allow the fresh air to come in and for you to see the full view outside.
51
www.rispostaserramenti.it
RESISTANT MATERIALS Because the mechanisms work well and for a long time they must be made of high quality materials; such as those of the Maico concealed hardware:
◗ Steel with double percentage of carbon
◗ stainless steel supporting plate ◗ central varnished component with
cataphoresis◗ reinforced connection of the pins ◗ greasing to reduce friction and wear
by rubbing
LOAD OF UP TO 150 KILOSThe Maico concealed hardware can hold frames of up to 150 kilos of weight*.This means that it is suitable for windows and French doors with thick profi les, with double or triple glazing. In other words, it is the right hardware for frames with high thermal-acoustic insulation.
* 150 Kilos is the maximum load that can be applied for a
French door, the limit for a window of standard size is 130 kilos.
MAICO was the first producer of window accessories to introduce, back in 2000, the hexavalent chromium-free passivation of silver into the electrolytic zinc process, with later applications of silicate-based sealing film. This technique has given excellent results in improving the features of the surfaces and has been the fi rst valid alternative to the chromium plating process with hexavalent chromium. The hardware made of steel and/or in Zamak alloy is galvanized, passivated and sealed.Passivation with thick layers and the sealing confer greater resistance to corrosion to the components and the typical appearance of zinc coating on metal.
HIGH RESISTANCE TO CORROSION WITH ECOLOGICAL TECHNOLOGYThe use of innovative production plants and continual development, especially in the sector of galvanotechnic processing (sealing with nano-structural silicon) has allowed Maico to satisfy the requisites of class 4 resistance to corrosion prescribed by the standard EN 1670.Moreover, the process is absolutely ecologically sound and does not use hexavalent chromium.
FIELDS OF USE As has been shown, the most suitable hardware for supporting ordinary stress is hardware galvanized by means of electrolysis. In more extreme situations, for example when used in damp environments, in factories that produce certain types of food or in coastal zones the effi ciency is limited, even though the components have been tested according to class 4 resistance to corrosion; this is due to the chemical reaction of the zinc layer with aggressive substances.
When a higher resistance to chemical aggression is needed, the MAICO TRICOAT hardware should be used.
MAICO Silver FinishingMAICO Silver FinishingSealing fi lm (with nano-structural silicon components)
Conversion layer(passivation and thick layer)
Zinc layer
Steel
53
www.rispostaserramenti.it
MAICO TRICOAT has been created especially for use where high resistance to corrosion is necessary.The special feature of MAICO TRICOAT hardware is in the fact that on the accessories with silver finishing already fitted, a further organic layer “Top Coat” (cataphoresis + paint) is applied on the surface treated with electrolytic galvanization; this gives to the components of MAICO TRICOAT the highest resistance to chemical aggression and corrosion and makes it far superior in quality compared to hardware treated with the normal galvanization process.
MAXIMUM RESISTANCE TO CORROSION WITH ECOLOGICAL TECHNOLOGYThe quality of MAICO TRICOAT hardware is superior to the requisites for class 5 resistance to corrosion prescribed by standard EN 1670.
Salt mist tests for resistance to rust corrosion have been carried out according to standard EN ISO 9227 at certified laboratories. As mentioned with the MAICO hardware with silver finishing, also with MAICO TRICOAT accessories the coating is absolutely ecologically sound and does not
make use of hexavalent chromium.
FIELDS OF USETRICOAT hardware is generally used in all the specifi c cases in which surfaces treated with electrolytic galvanization for resistance to corrosion are not suffi cient, such as in coastal areas, highly industrialised areas, in damp environments or factories with high concentration of corrosive agents, in swimming pools and companies that produce some types of food like butchers and dairies.
MAICO TRICOAT
Varnishing
Cataphoresis
Conversion layer
Zinc layer
Steel
Front door is an important building element often
setting the overall impression of a house.
This can be simple or elaborate, single or
double casement door, with lateral glazing or even a combined door
system. In each case the front doors are able to meet the aesthetic demands and functions requested by the end user.
Fie
The
douwitheven
Safety front doorSafety front door
In the range of front doors, puts safety and design in fi rst place, a perfect match for the production
of elegant, high quality front doors.
55
www.rispostaserramenti.it
Technical information
Technical information◗ High safety, optimum stability of the sash which is strongly
fi xed to the frame with good thermal and acoustic benefi ts.◗ Bolts made of treated steel and turn system by means of a
built-in anti-intrusion roller cam device.◗ Thanks to the anti-intrusion locking systems our front
doors fi tted with this kind of hardware have passed the test provided for by the standards DIN 18103 and DIN V ENV 1627.
◗ The panels can be made of safety glass or two PVC coated metal panes, spaced with high density expanded polyure-thane.
◗ The central part of the lockcase is provided with a 20 mm turn system arranged for housing cylinders with extraction resistant device (entrance 25 and 30 mm without turn)
◗ Three latches which automatically extend by 10 mm when closing the front door without the key. In this phase it is possible to open the front door by using only the handle.
◗ Two hooks made of treated steel which can be operated by turning the key.
◗ Extraction and drill-resistant European profi le safety cylinder with key.
◗ Turning the cylinder lock enables the closure of the door together with the hooks and the central bolt.
Door panels - Classic LineDoor panels - Classic Line
Mod. ABACO/K
Mod. BELLATRIX/K
Mod. LIBRA/K
Mod. REGOLO/KA1
Mod. ALGENIB/KB
Mod. ELISIR/KB
Mod. MIRANDA/KB
Mod. REGOLO/KD
Mod. ANTARES/KD
Mod. ERIDANO/K
Mod. PALLADIO/K
Mod. SPIGA/KB
Mod. AURIGA/K
Mod. KALIPSO/KD
Mod. PERSEO/K
Mod. SPIGA/KD
The colours are only indicative and can vary from the actual shade
57
www.rispostaserramenti.it
Door panels - Style Line
Mod.ALGENIB-XC1
Mod.DREAM-X3
Mod.KLIO-X1
Mod.ROTARY-X
Mod.ALGENIB-XC1with grating
Mod.ECHO-X1
Mod.KLIO-X1
with grating
Mod.ROTARY-X4
Mod.AURIGA-X1
Mod.ECHO-X1
with grating
Mod.MOON-X
Mod.STYLE-XV1
Mod.AURIGA-X1with grating
Mod.ELISIR-X1
Mod.MOON-X1
Mod.STYLE-XV1with grating
Mod.CASSIOPEA-X
Mod.ELISIR-X1
with grating
Mod.MOON-X1
with grating
Mod.TRIANGOLO-X
Mod.CASSIOPEA-X1
Mod.ELLISSE-X
Mod.QUADRA-XD
Mod.TRIANGOLO-X1
Mod.CASSIOPEA-X1
with grating
Mod.ELLISSE-X1
Mod.QUADRA-XD1
Mod.TRIANGOLO-X1
with grating
Mod.DREAM-X
Mod.ELLISSE-X1
con grata
Mod.QUADRA-XD1with grating
Mod.VELE-X
The colours are only indicative and can very from the actual shade
Capri-Ischia ShuttersCapri-Ischia Shutters
Technical information
◗ Closure with espagnolette and corner plates.◗ Possibility of also realising sliding shutters.◗ Upon request double locking locks can be inserted with
a knob on the inside and one turn cylinder pump on the outside.
◗ High stability due to the internal aluminium reinforcement frame
◗ Possibility of choosing among three types of assembly: on a frame, single-block or directly fastened to the wall.
To meet the architectural demands connected to the tradition of shutters, Ischia and Capri are the ideal solutions for PVC shutters with adjustable, spaced, blinds and plugging slats. Thanks to the internal load-bearing frame in aluminium, these systems give great stability. All the solutions guarantee an optimum level of tightness, resistance, low acoustic impact and resistance to atmospheric events. They are ideal for diverse architectural projects, restoration and new buildings. It is possible to make sliding shutters and to choose between three types of assembly: on a frame, single-block or directly fastened to the wall. In addition, upon request, double-closure locks can be fi tted.
59
www.rispostaserramenti.it
Capri-Ischia Shutters views
Vertical view of CAPRI shutters
Vertical view ofISCHIA shutters
Central combinationSash P 1942 – Rebate section P 1958
P 1942Sash
P 1953T-profi leP 1942
Sash with rebate
P 1942Sash with rebate
P 1942Sash with rebate
Adjustable Slats
Fixed slats
P 1942Sash with rebate
P 2105Slat
GRADO shutter: Grado is the ideal solution for the construction of classical or rustic PVC blind systems. Grado allows for the creation of a wide range of very thick PVC profi les. They have a double profi le consisting of an outer part which is 25 mm thick and an inner part 40 mm thick.Grado satisfi es the needs of high technical performance, guaranteeing stability and solidity while safeguarding the maximum level of elegance to the building.
OLBIA shutters:Olbia is the ideal solution for the construction of classic solid panel shutters, Vicenza-style folding shutters or the Padua-style shutters whose internal structure, together with mechanically-joined reinforcements, ensures stability and non-deformability. Olbia represents the union of the past, present and future. The tradition is combined with high technology performance that only PVC is able to offer and that is assured by our high manufacturing procedures.
Grado – Olbia Grado – Olbia shuttersshutters
Technical information
◗ Closure with espagnolette and straight or jointed hinges.
◗ Upon request double locking locks can be inserted
61
www.rispostaserramenti.itGrado-Olbia
shutter details
Grado blind system
Olbia shutter opening
OLBIA SHUTTER – VICENZA-STYLE FOLDING OPENING
OLBIA SHUTTERPADUA-STYLE OPENING
CENTRAL COMBINATION WITH REBATE
SECTION K4020DOORJAMB COMBINATION P2110
WITH REBATE P2113
Different solutions are available
for new buildings or renovations.
Different kinds of operations,
either manual or motorized systems.
Technical information
◗ Rolling shutter box with integral closure.◗ Different kinds of operations, either manual or motorized
systems.◗ Suitable for new buildings, renovations, replacement of
pre-existing shutter boxes of all kind
◗ Swiftness and easiness of installation.◗ K-Value: 2.74 W (m2/K)◗ Soundproofi ng: 38 dB according to DIN 52210 part 3
Rolling shutter Rolling shutter boxesboxes
63
www.rispostaserramenti.it
Varinova Monobloc
◗ G4 rolling shutter box dimensions (240/250)◗ Maximum rolling height up to the lower corner of the outside covering of the box◗ Maximum overall dimensions approx. 198 mm ◗ Soundproofi ng: 37 dB (with Neopor insulating material)◗ Soundproofi ng: 44 dB (with Neopor insulating material + heavy fi lm)◗ Thermal transmittance value: W/(m²K) Usb 0.81◗ Optional mosquito net
Technical information
PROFILE THICKNESS
40.5 MM
PROFILE THICKNESS
24 MM
Our workplaces are clean, spacious and bright. The machinery is computerised and automated using the most advanced European technology and managed by a young workforce who have grown professionally inside the company, always having been dedicated exclusively to the manufacturing of PVC window and door frames and with the demanding eye of the artisan who feels the product as “his” own.
This is the formula for offering design, components and accessories in a window that is always at the apex of quality, performance and guaranteed durability.
All this is completed with the assembling operations carried out by skilled personnel who are always fully up-to date and trained on the use of the best techniques and assembling materials for the work carried out in new buildings or renovations.
Our Our productionproduction
65
www.rispostaserramenti.it
STANDARD COLOURSSTANDARD COLOURS
The colours are only indicative and can vary from the actual shade
1379-05-167IVORY COATED 067
9294-05-179ASH WHITE 064
SMOOTH WHITE 654
2178-001-167OAK GOLD 032
2178-007-167WALNUT GOLD 052
67
www.rispostaserramenti.it
NON STANDARD COLOURS
I colori sono puramente indicativi e possono differire dai toni reali
3167-011-167WHITE OAK
49240-015WINCHESTER XA 0WI
3211-005-148IRISH OAK 0IO
2052-090-167OAK 074
2115-008-167OREGON 3 041
3152-009-167DOUGLAS 076
49233-015DARK SIENA 0SC
49252-015WINCHESTER XC 0WC
3162-002-167MACORE 042
2065-021-167MAHOGANY 024
3202-001-167BLACK CHERRY 090
2052-089-167DARK OAK 034
3167-004-167BOG OAK 078
8518-05-167DARK BROWN 080
7251-05-167LIGHT GREY 094
7155-05-167GREY 021
7016-05-167ANTHRACITE GREY 016
5007-05-167LIGHT BLUE 085
5150-05-167DARK BLUE 088
3081-05-167BASQUE RED 046
3005-05-167WINE RED 044
F4265020SAGE GREEN 0VS
6125-05-167DARK GREEN 058
6125-05-179ASH GREEN 0VF
F4361002SILVER 0AR
F4361007BRASS 0MM
9152-05-168GRAINED WHITE 065
HANDLESHANDLES
GLAZED CHROME POLISHED CHROME GLAZED BRASS POLISHED BRASS
COVERINGCOVERING
The colours are only indicative and can vary from the actual shade
Prolungamento via G.B. Meli - Loc. Taglie, 1825013 CARPENEDOLO (Bs) - ITALIA
Tel. +39 030 9658720 - Fax +39 030 9660011E-mail: [email protected]
www.rispostaserramenti.it TIP
OP
EN
NA
TI S
rl -
Mo
ntic
hiar
i (B
S)