MINI FRAGMENT INSTRUMENTS & STAINLESS STEEL IMPLANTS

BASIC INSTRUMENT –AND IMPLANT SET MINI FRAGMENT!

1

0123

MAT GmbH&Co.KG Œ 0123 revision: 09.09.2014 Friedrich-Wöhler-Str. 10 ; D-78576 Emmingen ; Tel.+49 7465 / 909 189 E-mail: info@mat-medical.com ; website: www.mat-medical.com _______________________________________________________________________________________________________________________________________________________ INSTRUCTIONS FOR USE 3. (GB) Warning: The implants described may only be used in combination with MAT products! OSTEOSYNTHESIS – STEEL IMPLANTS (Bone: Plates / Screws / Nails / Wires / Staples ) non-sterile IMPLANT MATERIAL: Implants made from steel in accordance with ISO 5832 – 1 stainless steel ; ISO 5832 – 9 high nitrogen stainless steel manufactured by MAT GmbH&Co.KG. The surface of these implants is chemically passive: not magnetic. These implants can be combined with the standardised material provided that its composition lies within the analysis stipulated in the ISO 5832 – 1 / ISO 5832 – 9 standard and the required specifications. Material alloys with chrome-nickel (implant steel) components can trigger a so-called chrome-nickel allergy by their nature; there are no other known biocompatible hazards! We would point out that implants only function correctly if the following basic rules are observed: - When selecting implants (bone: plates / screws / pins

wires / clips), care must be taken to choose the appropriate implants on the basis of the weight and level of activity of the patient, and the bone fracture to be treated.

- Note that by making the correct choice of biomechanics the forces to be transferred by the implants remain low.

- Extreme deformation of the implants must be avoided; the cautious bending of wires, plates and pins does not, however, lead to implant damage provided it is done with sufficient care.

- Repeated deformation should be avoided at all costs as it will fatigue the implant material.

- The re-use of implants is absolutely forbidden (single use).

- We strongly advise you to inform patients of the advantages and disadvantages of implants.

- Excessive strain as a result of body weight and the level of activity of the patient should be avoided due to the limited strength of the implants. Failure to observe these precautionary measures can have serious consequences for the healing process.

INDICATIONS These relate to the current practice of applications of implants in osteosynthesis (e.g. see literature AO/ASIF Instruments and Implants Texhammer*Colton ISBN 3-540-56895-6 / ISBN 0-387-56895-6). CONTRAINDICATIONS Acute and chronic infections; muscle, nerve or vascular diseases that endanger the affected extremity; a lack of bony tissue or poor bone quality (e.g. severe osteoporosis); local bone tumours. Systemic diseases and metabolic disorders; infections and falls; drug dependence; obesity; highly physical activities together with activities involving extreme vibrations which can lead to overstraining of the implants. NOTES The user should record and keep all information provided to the patient. It should be checked before use whether the patient tolerates the material to be implanted. The implants described in these instructions for use may only be used (implanted) by surgeons with the appropriate experience. POSSIBLE NEGATIVE EFFECTS (RISKS) Failure of the fracture to heal, allergy to the material, failure of the product (break, bending), bone deformation and refracture, infection. REMOVAL OF IMPLANTS The implants are normally removed once the fracture has healed. CLEANING AND STERILISATION OF UNSTERILE IMPLANTS Before use, the implants must be sterilised using a validated procedure (autoclaved). MAT GmbH&Co.KG VALIDATED PROCEDURES STERILISER: Steam autoclave: Temperature = 121° to 123° Celsius; Pressure = 1-1.2 bar (15 to 17 psi) with an exposure time of

at least 30 minutes in the packaged state. STERILISER: Autoclave with prevacuum: During the prevacuum phase the air is extracted from the chamber before the steam flows in.

Standard circulation for packaged objects: 132° to 135° Celsius; Pressure = 2 – 3 bar (27 to 30 psi) with an exposure time of at least 4 to 10 minutes. IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly! In the event of failure to observe these instructions or demonstrable violation, no guarantee or compensation for damages can be provided.

2

SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT –AND IMPLANT SET SET-LISTING – CONTENT FOR SET: SET-011-0010-003

TRAY-011-0010-003 Tray for Mini Fragment Basic Instrument –and Implant SET-011-0010-003 ( Graphic Case Steel ) INDEX: SET -011-0010-003 SET– LISTING – CONTENT ( PAGE 3 UP TO PAGE 5 ): INSTRUMENTS & IMPLANTS REF.-NO.: PRODUCT – DESCRIPTION: INSTRUMENTS PCS.: TRAY-011-0010-003 Tray for mini fragment basic instrument –and implant SET-011-0010-003 (Graphic Case) -1- 005-0210-011 Drill bit – AO shaft Ø1.1mm x length 60mm / 35mm -2- 005-0210-015 Drill bit – AO shaft Ø1.5mm x length 85mm / 60mm -2- 005-0210-019 Drill bit – AO shaft Ø2.0mm x length 100mm / 75mm -2- 005-0210-026 Drill bit – AO shaft Ø2.7mm x length 100mm / 75mm -2- 005-0210-088 Countersink – AO dental shaft for mini screws Ø1.5mm / Ø2.0mm -1- 005-0210-089 Small countersink Ø3.5mm used for Ø2.7mm / Ø3.5mm / Ø4.0mm screws, tip Ø2.0mm -1- 005-0210-095 Tap handle for dental shaft -1- 005-0211-015 Tap dental shaft Ø1.5mm used for Ø1.5mm cortical screws -2- 005-0211-019 Tap dental shaft Ø2.0mm used for Ø2.0mm cortical screws -2- 005-0211-026 Tap AO shaft Ø2.7mm with cortical pitch 1.0mm used for Ø2.7mm cortical screws -2- 005-0211-043 Tap handle with AO – quick coupling -1- 005-0212-015 Mini drill sleeve used for Ø1.1mm / Ø 1.5mm drill bits -1- 005-0212-020 Drill guide 2.0mm within 3/1 hole used for Ø2.0mm drill bit and K-wire Ø2.0mm -1- 005-0212-026 Tap sleeve Ø3.5mm, also use as Ø3.5mm drill guide -1- 005-0219-003 Depth gauge used for Ø1.5mm up to Ø2.0mm screws -1- 005-0219-004 Depth gauge used for Ø2.7mm up to Ø4.0mm screws -1- 005-0219-039 Sharp - hook -1- 005-0219-097 Screw holding forceps -1- 005-0229-001 Bending iron for mini and finger plates -1- 009-0390-015 Mini hex. screw driver with self-holding sleeve ( hex. flats 1.5mm ) used for Ø1.5mm/Ø2.0mm screws -1- 009-0390-025 Small hex. screw driver with self-holding sleeve ( hex. flats 2.5mm ) used for Ø2.7mm/Ø3.5mm/Ø4.0mm

screws -1-

010-0020-090 Reduction forceps with points, length 135mm -1- 010-0020-350 Small hohmann retractor 6mm -1- 010-0020-352 Small hohmann retractor 8mm -1- 010-0020-354 Small hohmann retractor with broad shank -2- 300-1351-603 Periosteal elevator, extra small, curved blade and straight edge, width 3mm -1- 005-0717-012 Holding forceps 12cm -1-

3

SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT –AND IMPLANT SET

SET-LISTING – CONTENT FOR SET: SET-011-0010-003 INDEX: SET -011-0010-003 SET– LISTING – CONTENT ( PAGE 3 UP TO PAGE 5 ): INSTRUMENTS & IMPLANTS REF.-NO.: PRODUCT – DESCRIPTION: K-WIRES PCS.: 004-0310-010 K-wire with single trocar point Ø1.0mm x length 150mm, round end -10- 004-0310-012 K-wire with single trocar point Ø1.2mm x length 150mm, round end -10- 004-0310-016 K-wire with single trocar point Ø1.6mm x length 150mm, round end -10- 004-0330-008 K-wire with single trocar point Ø0.8mm x length 70mm, round end -10- 004-0330-010 K-wire with single trocar point Ø1.0mm x length 70mm, round end -10- REF.-NO.: PRODUCT – DESCRIPTION: Steel Fullthreaded Cortical Screws Ø1.0mm PCS.: 001-0001-006 Ø1.5mm x length 6mm -4- 001-0001-007 Ø1.5mm x length 7mm -4- 001-0001-008 Ø1.5mm x length 8mm -4- 001-0001-009 Ø1.5mm x length 9mm -4- 001-0001-010 Ø1.5mm x length 10mm -4- 001-0001-011 Ø1.5mm x length 11mm -4- 001-0001-012 Ø1.5mm x length 12mm -4- 001-0001-014 Ø1.5mm x length 14mm -4- 001-0001-016 Ø1.5mm x length 16mm -4- REF.-NO.: PRODUCT – DESCRIPTION: Steel Fullthreaded Cortical Screws Ø2.0mm PCS.: 001-0002-006 Ø2.0mm x length 6mm -6- 001-0002-008 Ø2.0mm x length 8mm -6- 001-0002-010 Ø2.0mm x length 10mm -6- 001-0002-012 Ø2.0mm x length 12mm -6- 001-0002-014 Ø2.0mm x length 14mm -6- 001-0002-016 Ø2.0mm x length 16mm -6- 001-0002-018 Ø2.0mm x length 18mm -6- 001-0002-020 Ø2.0mm x length 20mm -6- REF.-NO.: PRODUCT – DESCRIPTION: Steel Fullthreaded Cortical Screws Ø2.7mm PCS.: 001-0003-006 Ø2.7mm x length 6mm -6- 001-0003-008 Ø2.7mm x length 8mm -6- 001-0003-010 Ø2.7mm x length 10mm -6- 001-0003-012 Ø2.7mm x length 12mm -6- 001-0003-014 Ø2.7mm x length 14mm -6- 001-0003-016 Ø2.7mm x length 16mm -6- 001-0003-018 Ø2.7mm x length 18mm -6- 001-0003-020 Ø2.7mm x length 20mm -6- 001-0003-022 Ø2.7mm x length 22mm -6- 001-0003-024 Ø2.7mm x length 24mm -6- REF.-NO.: PRODUCT – DESCRIPTION: Steel Washer PCS.: 001-0013-001 Washer for Ø2.7mm screws -6- REF.-NO.: PRODUCT – DESCRIPTION: Steel Plates for Ø2.7mm Screws PCS.: PL-1044-03 Small T-plate length 32mm x 3 holes, 2.7mm -4- PL-1046-03L Small L-plate length 34.5mm x 3 holes, Oblique LEFT, 2.7mm -2- PL-1046-03R Small L-plate length 34.5mm x 3 holes, Oblique RIGHT, 2.7mm -2- PL-1050-03 Quarter tubular plate, length 23mm x 3 holes, 2.7mm -2- PL-1050-04 Quarter tubular plate, length 31mm x 4 holes, 2.7mm -2- PL-1050-05 Quarter tubular plate, length 39mm x 5 holes, 2.7mm -2- PL-1050-06 Quarter tubular plate, length 47mm x 6 holes, 2.7mm -2- PL-1050-07 Quarter tubular plate, length 55mm x 7 holes, 2.7mm -2- PL-1050-08 Quarter tubular plate, length 63mm x 8 holes, 2.7mm -2-

4

SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT –AND IMPLANT SET

SET-LISTING – CONTENT FOR SET: SET-011-0010-003 INDEX: SET -011-0010-003 SET– LISTING – CONTENT ( PAGE 3 UP TO PAGE 5 ): INSTRUMENTS & IMPLANTS REF.-NO.: PRODUCT – DESCRIPTION: Steel Plates for Ø1.5mm and Ø2.0mm Screws PCS.: PL-1047-02 Mini T-plate 2 holes, 2.0mm -4- PL-1049-02L Mini L-plate 2 holes, Oblique LEFT, 2.0mm -2- PL-1049-02R Mini L-plate 2 holes, Oblique RIGHT, 2.0mm -2- PL-1067-03 Mini plate straight 3 holes x length 17mm, 2.0mm -2- PL-1067-04 Mini plate straight 4 holes x length 23mm, 2.0mm -2- PL-1067-05 Mini plate straight 5 holes x length 29mm, 2.0mm -2- RECOMMENDED STERILIZATION CONTAINER FOR SET-011-0010-003 REF.-NO.: STERILIZATION CONTAINER C-110-135 1/1 Size container, bottom non perforated outside 580 x 280 x 135mm / inside 550 x 265x 115mm

5

INSTRUMENTS FOR MINI FRAGMENT SYSTEM 005-0210-011 Drill bit – AO shaft Ø1.1mm x length 60mm / 35mm 005-0210-015 Drill bit – AO shaft Ø1.5mm x length 85mm / 60mm 005-0210-019 Drill bit – AO shaft Ø2.0mm x length 100mm / 75mm 005-0210-020 Drill bit – AO shaft Ø2.0mm x length 125mm / 100mm 005-0210-026 Drill bit – AO shaft Ø2.7mm x length 100mm / 75mm 005-0210-027 Drill bit – AO shaft Ø2.7mm x length 125mm / 100mm 005-0210-211 Drill bit – round shaft Ø1.1mm x length 45mm / 30mm 005-0210-215 Drill bit – round shaft Ø1.5mm x length 70mm / 30mm 005-0210-219 Drill bit – round shaft Ø2.0mm x length 85mm / 70mm 005-0210-226 Drill bit – round shaft Ø2.7mm x length 85mm / 70mm 005-0210-088 Countersink – AO dental shaft for mini screws Ø1.5mm / Ø2.0mm 005-0210-089 Small countersink Ø3.5mm used for Ø2.7mm / Ø3.5mm / Ø4.0mm screws, tip Ø2.0mm 005-0210-095 Tap handle for dental shaft 005-0211-015 Tap dental shaft Ø1.5mm used for Ø1.5mm cortical screws 005-0211-019 Tap dental shaft Ø2.0mm used for Ø2.0mm cortical screws 005-0211-026 Tap AO shaft Ø2.7mm with cortical pitch 1.0mm used for Ø2.7mm cortical screws 005-0211-043 Tap handle with AO – quick coupling 005-0212-015 Mini double drill sleeve used for Ø1.1mm / Ø 1.5mm drill bits 005-0212-016 Mini double drill sleeve used for Ø1.5mm / Ø 2.0mm drill bits

6

INSTRUMENTS FOR MINI FRAGMENT SYSTEM 005-0212-017 Double drill sleeve used for Ø2.0mm / Ø 2.7mm drill bits 005-0212-020 Drill guide 2.0mm within 3/1 hole used for Ø2.0mm drill bit and K-wire Ø2.0mm 005-0222-021 Universal drill guide 2.7mm / 2.0mm used for tap Ø2.7mm drill bit and K-wire Ø2.0mm

applicable for neutral load and compression position 005-0212-026 Tap sleeve Ø3.5mm, also use as Ø3.5mm drill guide 005-0219-003 Depth gauge used for Ø1.5mm up to Ø2.0mm screws 005-0219-004 Depth gauge used for Ø2.7mm up to Ø4.0mm screws 005-0219-039 Sharp - hook

005-0219-097 Screw holding forceps

7

INSTRUMENTS FOR MINI FRAGMENT SYSTEM 005-0229-001 Bending iron for mini and finger plates 005-0229-004 Bending iron for 3.5mm / 2.7mm plates 005-0229-005 Bending iron for 2.7mm / 3.5mm plates 009-0390-015 Mini hex. screw driver with self-holding sleeve ( hex. flats 1.5mm ) used for Ø1.5mm/Ø2.0mm screws 009-0390-025 Small hex. screw driver with self-holding sleeve ( hex. flats 2.5mm ) used for Ø2.7mm/Ø3.5mm/Ø4.0mm

screws 009-0390-052 Self-holding sleeve for screw driver REF. 009-0390-025 009-0368-025 Small hex. screw driver for self-holding sleeve ( hex. flats 2.5mm ) used for Ø2.7mm/Ø3.5mm/Ø4.0mm

screws 009-0390-060 Coupling self-holding sleeve for screw driver REF. 009-0368-025

8

INSTRUMENTS FOR MINI FRAGMENT SYSTEM 010-0020-350 Small hohmann retractor 6mm 010-0020-352 Small hohmann retractor 8mm 010-0020-354 Small hohmann retractor with broad shank 300-1351-603 Periosteal elevator, extra small, curved blade and straight edge, width 3mm 010-0020-802 Periosteal elevator, small, curved blade and straight edge, width 6mm 005-0717-012 Holding forceps 12cm

010-0020-090 Reduction forceps with points, length 135mm 010-0020-088 Reposition forceps curved with ratchet fixation, one point tip, length 135mm

9

INSTRUMENTS FOR MINI FRAGMENT SYSTEM 010-0020-092 Reposition forceps curved with ratchet fixation, length 145mm INS-8206-00 Verbrügge bone holding forceps, length 175mm 010-0020-070 Self-centering bone holding forceps, length 150mm INS-8207-00 Inge 16.0cm

INS-8205-10 Scarf bone holding forceps

10

INSTRUMENTS FOR MINI FRAGMENT SYSTEM 300-1833-050 Bending pliers for 2.4mm up to 4.0mm plates, length 23.0cm 300-1833-052 Bending pliers for 1.0mm up to 2.0mm plates, length 20.0cm 300-3649-814 Wire bending pliers 300-3650-016 Bending bolt for K-wires Ø0.8mm up to Ø2.5mm 300-0007-430 TC-wire cutter 180mm used for soft wire Ø2.0mm – hard wire Ø1.5mm 300-0007-434 TC-wire cutter 220mm used for soft wire Ø3.0mm – hard wire Ø2.5mm

11

INSTRUMENTS FOR MINI FRAGMENT SYSTEM INS-0222-22 Partsch mallet Ø22mm, weight 200g, length 19cm

MINI-LAMBOTTE OSTEOTOME INS-23-3805-12 Mini-Lambotte Osteotome width 3mm, length 12.5cm / 5” INS-23-3806-12 Mini-Lambotte Osteotome width 4mm, length 12.5cm / 5” INS-23-3807-12 Mini-Lambotte Osteotome width 6mm, length 12.5cm / 5” INS-23-3808-12 Mini-Lambotte Osteotome width 8mm, length 12.5cm / 5” INS-23-3809-12 Mini-Lambotte Osteotome width 10mm, length 12.5cm / 5” INS-23-3815-17 Mini-Lambotte Osteotome width 3mm, length 17cm / 6 ¼” INS-23-3816-17 Mini-Lambotte Osteotome width 4mm, length 17cm / 6 ¼” INS-23-3817-17 Mini-Lambotte Osteotome width 6mm, length 17cm / 6 ¼” INS-23-3818-17 Mini-Lambotte Osteotome width 8mm, length 17cm / 6 ¼” INS-23-3819-17 Mini-Lambotte Osteotome width 10mm, length 17cm / 6 ¼”

K – WIRES TROCAR WITH ROUND END 004-0310-010 K-wire with single trocar point Ø1.0mm x length 150mm, round end 004-0310-012 K-wire with single trocar point Ø1.2mm x length 150mm, round end 004-0310-016 K-wire with single trocar point Ø1.6mm x length 150mm, round end 004-0330-008 K-wire with single trocar point Ø0.8mm x length 70mm, round end 004-0330-010 K-wire with single trocar point Ø1.0mm x length 70mm, round end

12

MINI FRAGMENT DIA. 1.5MM SCREWS STAINLESS STEEL MINI FRAGMENT DIA. 1.5MM CORTICAL SCREW IMPLANTS

STAINLESS STEEL MINI FRAGMENT DIA.1.5MM CORTICAL SCREW IMPLANTS, SELF-TAPPING

Product – Description: Stainless Steel Cortical Screw, Fullthreaded Ø 1.5mm Important Technical Dimensions: Head Diameter Ø3.0mm Hexagonal Socket width 1.5mm Core Diameter for cortical Thread Ø 1.0mm Thread Diameter Ø1.5mm Thread Pitch 0.5mm Applicable Drill Bit for gliding Hole Ø 1.5mm Applicable Drill Bit for Thread Hole Ø 1.1mm Used Tap Ø 1.5mm Material: Stainless Steel

Product – Description: Stainless Steel Cortical Screw, Fullthreaded Ø 1.5mm Important Technical Dimensions: Head Diameter Ø3.0mm Hexagonal Socket width 1.5mm Core Diameter for cortical Thread Ø 1.0mm Thread Diameter Ø1.5mm Thread Pitch 0.5mm Applicable Drill Bit for gliding Hole Ø 1.5mm Applicable Drill Bit for Thread Hole Ø 1.1mm Note: tapping is not applicable! Material: Stainless Steel

REF.-NO.: Diameter and complete Length REF.-NO.: Diameter and complete Length 001-0001-006 Ø 1.5 mm x length 6mm 001-0001-006S Ø 1.5 mm x length 6mm 001-0001-007 Ø 1.5 mm x length 7mm 001-0001-007S Ø 1.5 mm x length 7mm 001-0001-008 Ø 1.5 mm x length 8mm 001-0001-008S Ø 1.5 mm x length 8mm 001-0001-009 Ø 1.5 mm x length 9mm 001-0001-009S Ø 1.5 mm x length 9mm 001-0001-010 Ø 1.5 mm x length 10mm 001-0001-010S Ø 1.5 mm x length 10mm 001-0001-011 Ø 1.5 mm x length 11mm 001-0001-011S Ø 1.5 mm x length 11mm 001-0001-012 Ø 1.5 mm x length 12mm 001-0001-012S Ø 1.5 mm x length 12mm 001-0001-014 Ø 1.5 mm x length 14mm 001-0001-014S Ø 1.5 mm x length 14mm 001-0001-016 Ø 1.5 mm x length 16mm 001-0001-016S Ø 1.5 mm x length 16mm 001-0001-018 Ø 1.5 mm x length 18mm 001-0001-018S Ø 1.5 mm x length 18mm 001-0001-020 Ø 1.5 mm x length 20mm 001-0001-020S Ø 1.5 mm x length 20mm

13

MINI FRAGMENT DIA. 2.0MM SCREWS STAINLESS STEEL MINI FRAGMENT DIA.2.0MM CORTICAL SCREW IMPLANTS

STAINLESS STEEL MINI FRAGMENT DIA.2.0MM CORTICAL SCREW IMPLANTS, SELF-TAPPING

Product – Description: Stainless Steel Cortical Screw, Fullthreaded Ø 2.0mm Important Technical Dimensions: Head Diameter Ø4.0mm Hexagonal Socket width 1.5mm Core Diameter for cortical Thread Ø 1.3mm Thread Diameter Ø2.0mm Thread Pitch 0.6mm Applicable Drill Bit for gliding Hole Ø 2.0mm Applicable Drill Bit for Thread Hole Ø 1.5mm Used Tap Ø 2.0mm Material: Stainless Steel

Product – Description: Stainless Steel Cortical Screw, Fullthreaded Ø 2.0mm Important Technical Dimensions: Head Diameter Ø4.0mm Hexagonal Socket width 1.5mm Core Diameter for cortical Thread Ø 1.3mm Thread Diameter Ø2.0mm Thread Pitch 0.6mm Applicable Drill Bit for gliding Hole Ø 2.0mm Applicable Drill Bit for Thread Hole Ø 1.5mm Note: tapping is not applicable! Material: Stainless Steel

REF.-NO.: Diameter and complete Length REF.-NO.: Diameter and complete Length 001-0002-006 Ø 2.0 mm x length 6mm 001-0002-006S Ø 2.0 mm x length 6mm 001-0002-008 Ø 2.0 mm x length 8mm 001-0002-008S Ø 2.0 mm x length 8mm 001-0002-010 Ø 2.0 mm x length 10mm 001-0002-010S Ø 2.0 mm x length 10mm 001-0002-012 Ø 2.0 mm x length 12mm 001-0002-012S Ø 2.0 mm x length 12mm 001-0002-014 Ø 2.0 mm x length 14mm 001-0002-014S Ø 2.0 mm x length 14mm 001-0002-016 Ø 2.0 mm x length 16mm 001-0002-016S Ø 2.0 mm x length 16mm 001-0002-018 Ø 2.0 mm x length 18mm 001-0002-018S Ø 2.0 mm x length 18mm 001-0002-020 Ø 2.0 mm x length 20mm 001-0002-020S Ø 2.0 mm x length 20mm 001-0002-022 Ø 2.0 mm x length 22mm 001-0002-022S Ø 2.0 mm x length 22mm 001-0002-024 Ø 2.0 mm x length 24mm 001-0002-024S Ø 2.0 mm x length 24mm 001-0002-026 Ø 2.0 mm x length 26mm 001-0002-026S Ø 2.0 mm x length 26mm 001-0002-028 Ø 2.0 mm x length 28mm 001-0002-028S Ø 2.0 mm x length 28mm 001-0002-030 Ø 2.0 mm x length 30mm 001-0002-030S Ø 2.0 mm x length 30mm 001-0002-032 Ø 2.0 mm x length 32mm 001-0002-032S Ø 2.0 mm x length 32mm 001-0002-034 Ø 2.0 mm x length 34mm 001-0002-034S Ø 2.0 mm x length 34mm 001-0002-036 Ø 2.0 mm x length 36mm 001-0002-036S Ø 2.0 mm x length 36mm 001-0002-038 Ø 2.0 mm x length 38mm 001-0002-038S Ø 2.0 mm x length 38mm

14

MINI FRAGMENT DIA. 2.7MM SCREWS STAINLESS STEEL MINI FRAGMENT DIA. 2.7MM CORTICAL SCREW IMPLANTS

STAINLESS STEEL MINI FRAGMENT DIA. 2.7MM CORTICAL SCREW IMPLANTS, SELF-TAPPING

Product – Description: Stainless Steel Cortical Screw, Fullthreaded Ø 2.7mm Important Technical Dimensions: Head Diameter Ø5.0mm Hexagonal Socket width 2.5mm Core Diameter for cortical Thread Ø 1.9mm Thread Diameter Ø2.7mm Thread Pitch 1.0mm Applicable Drill Bit for gliding Hole Ø 2.7mm Applicable Drill Bit for Thread Hole Ø 2.0mm Used Tap Ø 2.7mm Material: Stainless Steel

Product – Description: Stainless Steel Cortical Screw, Fullthreaded Ø 2.7mm Important Technical Dimensions: Head Diameter Ø5.0mm Hexagonal Socket width 2.5mm Core Diameter for cortical Thread Ø 1.9mm Thread Diameter Ø2.7mm Thread Pitch 1.0mm Applicable Drill Bit for gliding Hole Ø 2.7mm Applicable Drill Bit for Thread Hole Ø 2.0mm Note: tapping is not applicable! Material: Stainless Steel

REF.-NO.: Diameter and complete Length REF.-NO.: Diameter and complete Length 001-0003-006 Ø 2.7 mm x length 6mm 001-0003-006S Ø 2.7 mm x length 6mm 001-0003-008 Ø 2.7 mm x length 8mm 001-0003-008S Ø 2.7 mm x length 8mm 001-0003-010 Ø 2.7 mm x length 10mm 001-0003-010S Ø 2.7 mm x length 10mm 001-0003-012 Ø 2.7 mm x length 12mm 001-0003-012S Ø 2.7 mm x length 12mm 001-0003-014 Ø 2.7 mm x length 14mm 001-0003-014S Ø 2.7 mm x length 14mm 001-0003-016 Ø 2.7 mm x length 16mm 001-0003-016S Ø 2.7 mm x length 16mm 001-0003-018 Ø 2.7 mm x length 18mm 001-0003-018S Ø 2.7 mm x length 18mm 001-0003-020 Ø 2.7 mm x length 20mm 001-0003-020S Ø 2.7 mm x length 20mm 001-0003-022 Ø 2.7 mm x length 22mm 001-0003-022S Ø 2.7 mm x length 22mm 001-0003-024 Ø 2.7 mm x length 24mm 001-0003-024S Ø 2.7 mm x length 24mm 001-0003-026 Ø 2.7 mm x length 26mm 001-0003-026S Ø 2.7 mm x length 26mm 001-0003-028 Ø 2.7 mm x length 28mm 001-0003-028S Ø 2.7 mm x length 28mm 001-0003-030 Ø 2.7 mm x length 30mm 001-0003-030S Ø 2.7 mm x length 30mm 001-0003-032 Ø 2.7 mm x length 32mm 001-0003-032S Ø 2.7 mm x length 32mm 001-0003-034 Ø 2.7 mm x length 34mm 001-0003-034S Ø 2.7 mm x length 34mm 001-0003-036 Ø 2.7 mm x length 36mm 001-0003-036S Ø 2.7 mm x length 36mm 001-0003-038 Ø 2.7 mm x length 38mm 001-0003-038S Ø 2.7 mm x length 38mm 001-0003-040 Ø 2.7 mm x length 40mm 001-0003-040S Ø 2.7 mm x length 40mm 001-0003-042 Ø 2.7 mm x length 42mm 001-0003-042S Ø 2.7 mm x length 42mm 001-0003-045 Ø 2.7 mm x length 45mm 001-0003-045S Ø 2.7 mm x length 45mm 001-0003-046 Ø 2.7 mm x length 46mm 001-0003-046S Ø 2.7 mm x length 46mm 001-0003-048 Ø 2.7 mm x length 48mm 001-0003-048S Ø 2.7 mm x length 48mm 001-0003-050 Ø 2.7 mm x length 50mm 001-0003-050S Ø 2.7 mm x length 50mm 001-0003-055 Ø 2.7 mm x length 55mm 001-0003-055S Ø 2.7 mm x length 55mm 001-0003-060 Ø 2.7 mm x length 60mm 001-0003-060S Ø 2.7 mm x length 60mm 001-0013-001 Washer for Ø2.7mm screws

15

MINI FRAGMENT 1.5MM PLATES STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATE 1.5 MM Straight Mini Plate 1.5mm with oval Holes used with Ø1.5mm steel cortical screws Mainly applicable in phalangeal Fractures Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 3.8 mm Distance Hole / Shaft 5.0 mm Material: Stainless Steel Product Description: Stainless Steel Straight Mini Plate 1.5 mm REF.-NO.: Complete Length and Holes PL-1052-20 length 100 mm x 20 hole STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 1.5 MM Mini T-Plates 1.5mm with oval Holes used with Ø1.5mm steel cortical screws Mainly applicable in the distal or proximal ends phalanges Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 3.8 mm Distance Hole / Shaft 5.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini T- Plate 1.5 mm REF.-NO.: Complete Length and Holes PL-1052-03 length 50 mm x 9 hole in shaft + 3 hole in head PL-1052-04 length 50 mm x 9 hole in shaft + 4 hole in head STAINLESS STEEL MINI FRAGMENT MINI H-PLATE 1.5 MM Mini H-Plate 1.5mm with oval Holes used with Ø1.5mm steel cortical screws Mainly applicable for Re -Implantation of transversely amputated Fingers Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 9.0 mm x 8.2 mm Distance Hole / 5.0 mm x 4.2mm Material: Stainless Steel Product Description: Stainless Steel Mini H- Plate 1.5 mm REF.-NO.: Complete Length and Holes PL-1052-09 length 9.0 mm x 4 hole

16

MINI FRAGMENT 1.5 MM PLATES STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 1.5 MM Mini Condylar Plate 1.5mm with oval Holes used with Ø1.5mm steel cortical screws Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 3.8 mm Distance Hole / Shaft 5.0 mm Pin Length 14 mm x Pin width 2.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini Condylar Plate 1.5 mm REF.-NO.: Complete Length and Holes REF.-NO.: Complete Length and Holes PL-1052-06L length 26 mm x 6 hole LEFT PL-1052-06R length 26 mm x 6 hole RIGHT

17

MINI FRAGMENT 2.0 MM PLATES STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI ADAPTION PLATE 2.0 MM Straight Mini Adaption Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable as a Reconstruction Finger Plate Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 5.0 mm Material: Stainless Steel Product Description: Stainless Steel Straight Mini Plate 2.0 mm REF.-NO.: Complete Length and Holes PL-1068-20 length 100 mm x 20 hole

18

MINI FRAGMENT 2.0 MM PLATES STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MM Straight Mini Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable in Hand and – Foot Fractures Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 5.0 mm Material: Stainless Steel Product Description: Stainless Steel Straight Mini Plates 2.0 mm REF.-NO.: Complete Length and Holes PL-1067-14 length 22 mm x 4 hole PL-1067-15 length 27 mm x 5 hole PL-1067-16 length 32 mm x 6 hole PL-1067-17 length 37 mm x 7 hole PL-1067-18 length 42 mm x 8 hole STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MM Straight Mini Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable in Hand and – Foot Fractures Important technical Dimensions: Thickness 1.5 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 5.0 mm Material: Stainless Steel Product Description: Stainless Steel Straight Mini Plates 2.0 mm REF.-NO.: Complete Length and Holes PL-1068-06 length 32 mm x 6 hole PL-1068-07 length 37 mm x 7 hole PL-1068-08 length 42 mm x 8 hole PL-1068-09 length 47 mm x 9 hole PL-1068-10 length 52 mm x 10 hole STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MM Straight Mini Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable for diaphyseal Fractures of the Phalanges Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 6.0 mm Material: Stainless Steel Product Description: Stainless Steel Straight Mini Plates 2.0 mm REF.-NO.: Complete Length and Holes PL-1067-03 length 17 mm x 3 hole PL-1067-04 length 23 mm x 4 hole PL-1067-05 length 29 mm x 5 hole PL-1067-06 length 35 mm x 6 hole

19

MINI FRAGMENT 2.0 MM PLATES STAINLESS STEEL MINI FRAGMENT STRAIGHT LOW TOUCH MINI PLATES 2.0 MM Straight Low Touch Mini Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable for diaphyseal Fractures of the Phalanges Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 4.0 mm Distance Hole / Shaft 6.0 mm Material: Stainless Steel Product Description: Stainless Steel Straight Low Touch Mini Plates 2.0 mm REF.-NO.: Complete Length and Holes PL-1069-04 length 23 mm x 4 hole PL-1069-05 length 29 mm x 5 hole PL-1069-06 length 35 mm x 6 hole PL-1069-07 length 41 mm x 7 hole PL-1069-08 length 47 mm x 8 hole PL-1069-09 length 53 mm x 9 hole PL-1069-10 length 59 mm x 10 hole PL-1069-20 length 119 mm x 20 hole STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATE 2.0 MM Straight Mini Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable in phalangeal Fractures Important technical Dimensions: Thickness 1.2 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 5.0 mm Material: Stainless Steel Product Description: Stainless Steel Straight Mini Plate 2.0 mm REF.-NO.: Complete Length and Holes PL-1067-20 length 100 mm x 20 hole

20

MINI FRAGMENT 2.0 MM PLATES

STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.0 MM Mini T-Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 6.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini T- Plate 2.0 mm REF.-NO.: Complete Length and Holes PL-1047-02 length 18 mm x 2 hole in shaft + 2 hole in head STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.0 MM, 90° ANGLED Mini L-Plates 2.0mm, 90° Angled with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 6.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini L - Plates 2.0 mm, 90° Angled REF.-NO.: Complete Length and Holes PL-1048-02R length 18 mm x 2 hole in shaft + 2 hole in head, 90° RIGHT PL-1048-02L length 18 mm x 2 hole in shaft + 2 hole in head, 90° LEFT STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.0 MM, OBLIQUE ANGLED Mini L-Plates 2.0mm, Oblique Angled with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 6.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini L - Plates 2.0 mm, Oblique Angled REF.-NO.: Complete Length and Holes PL-1049-02R length 20 mm x 2 hole in shaft + 2 hole in head, Oblique RIGHT PL-1049-02L length 20 mm x 2 hole in shaft + 2 hole in head, Oblique LEFT

21

MINI FRAGMENT 2.0 MM PLATES STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.0 MM Mini T-Plates 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable in the distal or proximal ends phalanges Important technical Dimensions: Thickness 1.2 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 5.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini T- Plate 2.0 mm REF.-NO.: Complete Length and Holes PL-1047-03 length 50 mm x 9 hole in shaft + 3 hole in head PL-1047-04 length 50 mm x 9 hole in shaft + 4 hole in head STAINLESS STEEL MINI FRAGMENT MINI H-PLATE 2.0 MM Mini H-Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable for Re -Implantation of transversely amputated Fingers Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 11.0 mm x 12.0 mm Distance Hole / 7.0 mm x 6.0mm Material: Stainless Steel Product Description: Stainless Steel Mini H- Plate 2.0 mm REF.-NO.: Complete Length and Holes PL-1052-12 length 12.0 mm x 4 hole

22

MINI FRAGMENT 2.0 MM PLATES STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 2.0 MM Mini Condylar Plate 2.0mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints Important technical Dimensions: Thickness 1.2 mm Broad / Shaft 5.0 mm Distance Hole / Shaft 5.0 mm Pin Length 14 mm x Pin width 2.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini Condylar Plate 2.0 mm REF.-NO.: Complete Length and Holes REF.-NO.: Complete Length and Holes PL-1053-06L length 29 mm x 6 hole LEFT PL-1053-06R length 29 mm x 6 hole RIGHT

23

MINI FRAGMENT 2.7 MM PLATES STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.7 MM Straight Mini Plates 2.7mm with oval Holes used with Ø2.7mm steel cortical screws Mainly applicable in Mandibular, but also found Application in metacarpal and metatarsal Fractures Important technical Dimensions: Thickness 2- 6 ( hole ) 2.0 mm Thickness 7-12 ( hole ) 2.5 mm Broad / Shaft 8.0 mm Distance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0mm except for REF. PL-1021-02 = Distance 16.8mm Material: Stainless Steel Product Description: Stainless Steel Straight Mini Plates 2.7 mm REF.-NO.: Complete Length and Holes PL-1021-02 length 20 mm x 2 hole PL-1021-02-L length 26 mm x 2 hole PL-1021-03 length 28 mm x 3 hole PL-1021-04 length 36 mm x 4 hole PL-1021-05 length 44 mm x 5 hole PL-1021-06 length 52 mm x 6 hole PL-1021-07 length 60 mm x 7 hole PL-1021-08 length 68 mm x 8 hole PL-1021-09 length 76 mm x 9 hole PL-1021-10 length 84 mm x 10 hole PL-1021-11 length 92 mm x 11 hole PL-1021-12 length 100 mm x 12 hole PL-1021-13 length 108 mm x 13 hole PL-1021-14 length 116 mm x 14 hole STAINLESS STEEL MINI FRAGMENT STRAIGHT LOW TOUCH MINI PLATES 2.7 MM Straight Low Touch Mini Plates 2.7mm with oval Holes used with Ø2.7mm steel cortical screws Mainly applicable in Mandibular, but also found Application in metacarpal and metatarsal Fractures Important technical Dimensions: Thickness 2- 6 ( hole ) 2.0 mm Thickness 7-12 ( hole ) 2.5 mm Broad / Shaft 8.0 mm Distance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0mm Material: Stainless Steel Product Description: Stainless Steel Straight Low Touch Mini Plates 2.7 mm REF.-NO.: Complete Length and Holes PL-1070-02 length 20 mm x 2 hole PL-1070-03 length 28 mm x 3 hole PL-1070-04 length 36 mm x 4 hole PL-1070-05 length 44 mm x 5 hole PL-1070-06 length 52 mm x 6 hole PL-1070-07 length 60 mm x 7 hole PL-1070-08 length 68 mm x 8 hole PL-1070-09 length 76 mm x 9 hole PL-1070-10 length 84 mm x 10 hole PL-1070-11 length 92 mm x 11 hole PL-1070-12 Length 100 mm x 12 hole

24

MINI FRAGMENT 2.7 MM PLATES STAINLESS STEEL MINI FRAGMENT QUARTER TUBULAR MINI PLATES 2.7 MM Quarter Tubular Mini Plates 2.7mm with oval Holes used with Ø2.7mm steel cortical screws Mainly applicable as tension band Plates in Fractures of metacarpal and metatarsal Bones Important technical Dimensions: Thickness 1.0 mm Broad / Shaft 78.0 mm Distance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0mm Material: Stainless Steel Product Description: Stainless Steel Quarter Tubular Mini Plates 2.7 mm REF.-NO.: Complete Length and Holes PL-1050-03 length 23 mm x 3 hole PL-1050-04 length 31 mm x 4 hole PL-1050-05 length 39 mm x 5 hole PL-1050-06 length 47 mm x 6 hole PL-1050-07 length 55 mm x 7 hole PL-1050-08 length 63 mm x 8 hole PL-1050-09 length 71 mm x 9 hole PL-1050-10 length 79 mm x 10 hole STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 2.7 MM Mini Condylar Plate 2.7mm with oval Holes used with Ø2.0mm steel cortical screws Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints Important technical Dimensions: Thickness 1.5 mm Broad / Shaft 7.0 mm Distance Hole / Shaft 8.0 mm Pin Length 20 mm x Pin width 2.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini Condylar Plate 2.7 mm REF.-NO.: Complete Length and Holes REF.-NO.: Complete Length and Holes PL-1055-06L length 55 mm x 6 hole LEFT PL-1055-06R length 55 mm x 6 hole RIGHT

25

MINI FRAGMENT 2.7 MM PLATES STAINLESS STEEL MINI FRAGMENT MINI MULTIFRAGMENT PLATE 2.7 MM Mini Multifragment Plate 2.7mm with round Holes used with Ø2.7mm steel cortical screws Mainly applicable for metacarpal and metatarsal Fractures Important technical Dimensions: Thickness 1.2 mm Broad / Shaft 14.5 mm Distance Hole / Shaft 8.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini Multifragment Plate 2.7 mm REF.-NO.: Complete Length and Holes PL-1046-07 length 44.5 mm x 7 hole STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.7 MM Mini T-Plates 2.7mm with oval Holes used with Ø2.7mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions: Thickness 1.2 mm Broad / Shaft 7.0 mm Distance Hole / Shaft 8.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini T- Plates 2.7 mm REF.-NO.: Complete Length and Holes PL-1044-03 length 32 mm x 3 hole in shaft + 2 hole in head PL-1044-04 length 40 mm x 4 hole in shaft + 2 hole in head PL-1044-05 length 48 mm x 5 hole in shaft + 2 hole in head PL-1044-06 length 56 mm x 6 hole in shaft + 2 hole in head PL-1044-07 length 64 mm x 7 hole in shaft + 2 hole in head PL-1044-08 length 72 mm x 8 hole in shaft + 2 hole in head

26

MINI FRAGMENT 2.7 MM PLATES STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.7 MM, 90° ANGLED Mini L-Plates 2.7mm, 90° Angled with oval Holes used with Ø2.7mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions: Thickness 1.2 mm Broad / Shaft 7.0 mm Distance Hole / Shaft 8.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini L - Plate 2.7 mm, 90° Angled REF.-NO.: Complete Length and Holes PL-1045-03R length 32 mm x 3 hole in shaft + 2 hole in head, 90° RIGHT PL-1045-03L length 32 mm x 3 hole in shaft + 2 hole in head, 90° LEFT STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.7 MM, OBLIQUE ANGLED Mini L-Plates 2.7mm, Oblique Angled with oval Holes used with Ø2.7mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions: Thickness 1.2 mm Broad / Shaft 7.2 mm Distance Hole / Shaft 8.0 mm Material: Stainless Steel Product Description: Stainless Steel Mini L - Plates 2.7 mm, Oblique Angled REF.-NO.: Complete Length and Holes PL-1046-03R length 34.5 mm x 3 hole in shaft + 2 hole in head, Oblique RIGHT PL-1046-03L length 34.5 mm x 3 hole in shaft + 2 hole in head, Oblique LEFT

27

REV.: 30.03.2015 MAT GmbH&Co.KG Œ 0123 Friedrich-Wöhler-Str. 10 ; D-78576 Emmingen ; Tel.+49 7465 / 909 189 E-mail: info@mat-medical.com ; website: www.mat-medical.com

28