Brochure - HNC Group · series GPC Brochure. 2 osc erot Pneatics Piston rod cylinders → Guide...
Transcript of Brochure - HNC Group · series GPC Brochure. 2 osc erot Pneatics Piston rod cylinders → Guide...
Piston rod cylinders → Guide cylinders
series GPC
Brochure
2 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylindersseries GPC
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
5
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
19
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
32
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
38
Guide cylinder, Series GPC-ST▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
44
Supplementary products, GPC series online
Accessories
Accessories overview
Accessories overview 49
Easy‒2‒Combine connection kits
Easy‒2‒Combine, Connection kit▶ For combination: GPC-E / GSP 50
Easy‒2‒Combine, Connection kit▶ For combination: MSC / GPC-E 52
Easy‒2‒Combine, Connection kit▶ For combination: GPC-ST / MSC 55
Easy‒2‒Combine, Connection kit▶ For combination: GPC-ST / GPC-E 56
3Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylindersseries GPC
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Easy‒2‒Combine, Connection kit▶ For combination: GSU / GPC-E 59
Easy‒2‒Combine, Connection kit▶ For combination: RMC-HE / GPC-E 61
Easy‒2‒Combine, Connection kit▶ For combination: GPC-E / GPC-E 63
Easy‒2‒Combine, Connection kit▶ For combination: RTC-HD / GPC-E 64
Centering rings 66
Sensors and sensor mountings, accessories
Sensor, Series ST4▶ 4 mm groove ▶ with cable ▶ without wire end ferrule, tin-plated 67
Sensor, Series ST4▶ 4 mm groove ▶ with cable ▶ Plug, M8, 3-pin 68
Sensor, Series ST4▶ 4 mm groove ▶ with cable ▶ Plug, M8, 3-pin, with knurled screw 69
Sensor, Series ST4▶ 4 mm groove ▶ with cable ▶ Plug, M12, 3-pin, with knurled screw 70
Sensor, Series ST6▶ 6 mm groove ▶ with cable ▶ without wire end ferrule, tin-plated 71
Sensor, Series ST6▶ 6 mm groove ▶ with cable ▶ Plug, M12, 3-pin, with knurled screw 73
Sensor, Series ST6▶ 6 mm groove ▶ with cable ▶ Plug, M8, 3-pin, with knurled screw 74
Sensor, Series SN3▶ Plug, M12, 3-pin ▶ welding-proof 75
SN3, Sensor mounting▶ for Series SN3 ▶ to mount on cylinder Series PRA, KPZ, GPC, CCI, KHZ 76
T-groove nut▶ for CKP, GPC, RTC 77
Groove lock profile 77
Connecting cable, Series CN2▶ Socket, M8, 3-pin ▶ open cable ends, 3-pin ▶ straight 78
4 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylindersseries GPC
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Connecting cable, Series CN2▶ Socket, M8, 3-pin ▶ open cable ends, 3-pin ▶ angled 79
M8x1 socket (female), Series CN2▶ Socket, M8x1, 3-pin ▶ straight 80
M8x1 socket (female), Series CN2▶ Socket, M8x1, 3-pin ▶ angled 81
Stroke setting accessories
Kit for stroke length adjustment 82
5Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
00106713
a11
Ambient temperature min./max. -10°C / +70°CMedium temperature min./max. -10°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pressure for determining piston forces 6,3 bar
Materials:Housing Aluminum, anodizedSeal PolyurethaneFront plate Steel galvanizedGuide rod Stainless steelBearing Sintered bronzePiston rod Stainless steel
Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants.■ The product is a part of the EasyHandling system.
Piston Ø [mm] 10 12 16 20 25Port M5 M5 M5 M5 G 1/8Working pressure min./max. [bar] 2 / 8 2 / 8 2 / 8 2 / 8 1.5 / 8Retracting piston force [N] 42 53 95 148 260Extracting piston force [N] 49 71 127 198 309Speed max. [m/s] 0.5 0.5 0.5 0.5 0.8Impact energy [J] 0.04 0.1 0.11 0.15 0.35
Piston Ø [mm] 32 40 50 63 80Port G 1/8 G 1/8 G 1/4 G 1/4 G 1/4Working pressure min./max. [bar] 1.3 / 8 1 / 8 1 / 8 1 / 8 1 / 8Retracting piston force [N] 435 720 1110 1837 2969Extracting piston force [N] 507 792 1237 1964 3167Speed max. [m/s] 0.6 0.6 0.6 0.6 0.4Impact energy [J] 0.4 0.52 0.64 0.75 0.75
Piston Ø [mm] 100Port G 3/8Working pressure min./max. [bar] 1 / 8Retracting piston force [N] 4639Extracting piston force [N] 4948Speed max. [m/s] 0.4Impact energy [J] 1
6 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston ØPiston rod Ø
104
126
168
2010
2510
Stroke 10 R402000294 0822060000 0822061000 0822062000 082206300020 R402000296 0822060001 0822061001 0822062001 082206300125 R402000297 0822060007 0822061007 0822062007 082206300730 R402000298 0822060002 0822061002 0822062002 082206300240 R402000300 0822060003 0822061003 0822062003 082206300350 R402000302 0822060004 0822061004 0822062004 082206300475 R402000307 0822060005 0822061005 0822062005 0822063005
100 R402000312 0822060006 0822061006 0822062006 0822063006125 - 0822060024 0822061024 0822062024 0822063024150 - 0822060029 0822061029 0822062029 0822063029160 - - - - 0822063031200 - - - - 0822063039
Piston ØPiston rod Ø
3212
4012
5016
6316
8020
Stroke 10 - - - - -20 - - - - -25 0822064000 0822065000 0822066000 0822067000 R40200091430 - - - - -40 - - - - -50 0822064001 0822065001 0822066001 0822067001 R40200091575 0822064002 0822065002 0822066002 0822067002 R402000916
100 0822064003 0822065003 0822066003 0822067003 R402000917125 0822064004 0822065004 0822066004 0822067004 R402000918150 - - - - -160 0822064005 0822065005 0822066005 0822067005 R402000919200 0822064006 0822065006 0822066006 0822067006 R402000920
Piston ØPiston rod Ø
10025
Stroke 10 -20 -25 R40200092830 -40 -50 R40200092975 R402000930
100 R402000931125 R402000932150 -160 R402000933200 R402000934
7Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Weight [kg] Piston Ø 10 12 16 20 25Stroke 10 0.19 0.3 0.38 0.5 0.82
20 0.22 0.34 0.44 0.57 0.9225 0.23 0.37 0.46 0.6 -30 0.24 0.39 0.49 0.64 1.0540 0.27 0.45 0.57 0.73 1.1450 0.29 0.49 0.63 0.8 1.2575 0.36 0.61 0.77 0.98 1.56
100 0.42 0.73 0.91 1.16 1.83125 - 0.85 1.06 1.35 2.15150 - 0.97 1.2 1.52 -160 - - - - 2.53200 - - - - 2.97
Piston Ø 32 40 50 63 80Stroke 10 - - - - -
20 - - - - -25 1.56 1.8 3 3.8 7.330 - - - - -40 - - - - -50 1.93 2.2 3.6 4.5 8.375 2.26 2.6 4.2 5.2 9.3
100 2.62 3.08 4.8 5.9 10.3125 3.06 3.6 5.6 6.86 11.6150 - - - - -160 3.57 4.1 6.4 7.78 12.9200 4.17 4.8 7.3 8.9 14.5
Piston Ø 100Stroke 10 -
20 -25 8.830 -40 -50 1075 11.1
100 12.2125 13.7150 -160 15.2200 17
8 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Dimensions, Ø 10 - 20
B-B A-A
C-C
L19
L20
(L20
)
L21
L22
L24
L29
L25
L4A
B
B
B
B1
B1
C PL
PL
L13
L14
(L14
)
L15
PL
LM1
LM2
ZA+S
D1
PL
ZJ+S
L17
L18
LJ2LJ2 LJ1
DX
D2
DD
D4
D
*K
E
1A A
3
2
B
E
K
L7
L5
E1L1
B
4
A-AL8
L9
L10
L11
L12
L6
L3
L2
d RT
LB
LA
FG
H HL30
L26
L27
LM3
E2
LM4
L28
L31
T
A1C
K
A
TT
1)
2)
2)
17230
* Suitable for screws according to ISO 47621) Only Ø 20 threaded hole2) M4 mounting hole for GPC-E accessoriesS = strokeNote: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants.
Piston Ø A1 D2 D4 E1 E2 K L1 L2 L3 L4 L5 L610 – 7 – 50 21 M5 20 ±0,04 10.5 3 – 20 1512 – 14.5 40 58 30.5 M5 23 ±0,04 15 4 22 50 2216 135° 15.8 47 68 33 M5 28 ±0,04 16.5 4 25 61 2520 135° 16.5 54 80 36 M5 30 ±0,04 18 3.5 24 70 29
9Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø L7 L8 L9 L10 L11 L12 L13 L14 S=10
L14 S=20
L14 S>20
L15 S=40
L15 S>40
L17
10 – – – – – – 15 – 20 20 55 55 1512 – – – – – – 14.5 – 18 22 – 58.5 416 43 6.15 12 1.5 1.5 5.5 14 18 25 25 – 64 420 50 6.15 12 1.5 1.5 5.5 15 16 24 24 – 63 4.5
Piston Ø L18 L19 L20 S=10
L20 S>10
L21 S=10
L21 S>10
L22 S≤40
L22 S>40
L24 S=10
L24 S>10
L25 L26 L27
10 – 8 20 20 13 1) 13 48 48 25 25 20 – 2012 22 8 20 20 18 18 – 48 25.5 25.5 20 – 4016 25 8 18 25 20.5 20.5 – 58 26.5 26.5 25 20 4020 24 8 20 30 18 23 – 68 23 27 30 25 50
Piston Ø L28 L29 L30 L31 LJ1 LJ2 LM1 LM2 LM3 LM4 PL T TT10 10 20 – – 15.5 15 5 13.5 48 19 8 5.5 –12 20 20 – – 24.8 17.5 8 12.7 55 27 8.5 5 –16 20 25 20 ±0,04 22 27 21 8 13.5 65 30 8.8 6.5 N620 25 30 25 ±0,04 25 26.5 25 10 15.5 77 33 10 5.5 N6
Piston Ø ZA10 3612 34.416 3620 36
S = strokeTo determine the cylinder length (ZA) for intermediate strokes (i.e. stroke 10 with dia. 40), the next available standard stroke size must be used1) Two holes C-C 10 mm.
10 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Dimensions, Ø 25 - 100
0822xxxxxx
L34
B1
A K
B
DC
L25
L18
L17 D4
L35 LJ2L36
*
LJ1
L21
L20
L23
L24
PL4
PL3
L15
L16L1
4L1
3
L19
L22
B
LB
B
A
B1
D2
EE
LM1
PL1
ZA+S
D1
LM2
ZJ+S
PL2
K
C
B1EC
RT
L9
A1
E1
T3
E2
LA
L10
L12L1
1
L7
L5
L3
A-A
BL8
L6
T4
L2
H
GF
T2
L26
L27
LM3
B-B
T1
T L28
LM4
L31T2
L1
L4
L16a
L29
L30TT
17231
* Suitable for screws according to ISO 4762S = strokeNote: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants.
Piston Ø A1 D2 D4 E1 E2 K L1 L2 L3 L4 L5 L6 L725 135° 18 59 95 43 G 1/8 35 ±0,1 20.5 4.5 25 ±0,1 85 34 5232 135° 23 75.6 114 48.5 G 1/8 44 ±0,1 24 5 33 ±0,1 105 26 7040 135° 23 86 124 54.5 G 1/8 53 ±0,15 27 6 40 ±0,15 110 42 8050 135° 27.5 104 148 64 G 1/4 66 ±0,15 32 8 48 ±0,15 133 34.5 9363 135° 35 124 162 78.5 G 1/4 84 ±0,15 39 8 60 ±0,15 147 62 11280 135° 39.5 152 202 91.5 G 1/4 100 ±0,15 46 9 60 ±0,15 182 54.5 132
100 135° 39.5 174 226 111 G 3/8 120 ±0,15 55.5 9 60 ±0,15 206 76 155
11Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø L8 L9 L10 L11 L12 L13 L15 L17 L18 L19 L22 L25 L2625 6.15 12 1.5 1.5 5.5 16.5 25 5.5 25 8 32 32 3032 8.2 16.7 2.2 2.8 9 20.5 33 6.5 33 10 42 42 3240 8.2 16.7 2.2 2.8 9 20 40 6 40 10 53 53 4250 8.2 16.7 2.2 2.8 9 23 48 7.5 48 12 63 63 5363 10.2 20.3 6 6 16 24 60 11 60 12 80 80 6380 10.2 20.3 6 6 16 33.5 60 12 60 13 96 96 80
100 10.2 20.3 6 6 16 32.5 60 12 60 13 119 119 96
Piston Ø L27 L28 L29 L30 L31 LJ1 LJ2 LM1 LM2 LM3 LM4 PL1 PL225 81 23 32 ±0,1 30 ±0,2 24 29.6 32 10 15.5 93 33 11 1132 97 30 42 ±0,1 32 ±0,2 25 40 40.5 12 18.5 112 43 13.5 13.540 107 30 53 ±0,15 42 ±0,2 32.5 37.8 44 12 19.5 122 43 12 1250 134 40 63 ±0,15 53 ±0,2 40 54.5 50.5 15 23.5 146 52 13 1363 140 48 80 ±0,15 63 ±0,2 48 57 59 15 24 160 67 13.7 13.780 176 52 96 ±0,15 80 ±0,2 60 77.5 74.5 20 30 200 76 23 23
100 204 64 119 ±0,15 96 ±0,2 60 68.5 86.5 20 31 224 84 21.5 21.5
Piston Ø PL3 PL4 T T1 T2 T3 T4 TT ZA25 11 11 6.5 18 ±0,4 32,5 ±0,4 30 ±0,05 20,5 ±0,05 N6 42 1)32 13.5 13.5 8 23 ±0,4 41 ±0,4 35 ±0,05 24 ±0,05 N8 46.540 12 12 8 23 ±0,4 41 ±0,4 35,5 ±0,1 27 ±0,1 N8 4450 13 13 7.5 27,5 ±0,4 47,5 ±0,4 41 ±0,1 32 ±0,1 N8 4663 13.7 13.7 11 35 ±0,4 49,5 ±0,4 39 ±0,1 39 ±0,1 N10 5180 23 23 13.5 39,5 ±0,45 61 ±0,45 51 ±0,2 46 ±0,2 N10 77
100 21.5 21.5 18.5 50,5 ±0,45 65 ±0,45 53 ±0,2 55,5 ±0,2 N10 77
S = strokeTo determine the cylinder length (ZA) for intermediate strokes (i.e. stroke 10 with dia. 40), the next available standard stroke size must be used1) For stroke 150, ZA = 52, for stroke 25, ZA = 47 Two holes C-C 10 mm.
Mounting holes position top/bottom, side, stroke: 10
Piston Ø S=10 L14
S=10 L20
S=10 L23
S=10 L34
S=10 L35
S=10 L36
S=10 ZJ
25 19 22 30 26 4 4 57.5
S = stroke
Mounting holes position top/bottom, side, stroke: 20
Piston Ø S=20 L14
S=20 L20
S=20 L35
S=20 L36
S=20 ZJ
25 25 22 4 4 57.5
S = stroke
Mounting holes position top/bottom, side, stroke: 25
Piston Ø S=25 L14
S=25 L20
S=25 L35
S=25 L36
S=25 ZJ
25 25 32 4 4 57.532 30 35 4 4 82
S = stroke
12 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø S=25 L14
S=25 L20
S=25 L35
S=25 L36
S=25 ZJ
40 30 30 4 4 82.650 25 30 4 4 94.563 28 30 4 4 94.680 35 47 4 4 117.5
100 37 49 4 4 117.5
S = stroke
Mounting holes position top/bottom, side, stroke: 30
Piston Ø S=30 L14
S=30 L20
S=30 L24
S=30 L34
S=30 L35
S=30 L36
S=30 ZJ
25 25 32 50 29 4 4 57.5
S = stroke
Mounting holes position top/bottom, side, stroke: 40
Piston Ø S=40 L14
S=40 L16
S=40 L16a
S=40 L20
S=40 L21
S=40 L24
S=40 L33
S=40 L35
S=40 L36
S=40 ZJ
25 25 41.5 65.5 32 24 60 65.5 6 6 57.5
S = stroke
Mounting holes position top/bottom, side, stroke: 50
Piston Ø S=50 L14
S=50 L16
S=50 L20
S=50 L21
S=50 L24
S=50 L34
S=50 L35
S=50 L35
S=50 ZJ
25 25 66.5 32 24 70 29 6 6 57.532 33 – 42 31 – 37 4 4 8240 40 – 53 36.5 – 40 4 4 82.650 48 – 30 27 – 47 4 4 94.563 28 – 30 27 – 38 4 4 94.680 60 – 47 36.5 – 63.5 4 4 117.5
100 60 – 49 37.5 – 62.5 4 4 117.5
S = stroke
Mounting holes position top/bottom, side, stroke: 75
Piston Ø S=75 L14
S=75 L16
S=75 L20
S=75 L24
S=75 L34
S=75 L35
S=75 L36
S=75 ZJ
25 25 91.5 32 95 29 8 8 68.532 33 86.5 42 – 37 6 6 8240 40 100 53 91 40 6 6 82.650 48 61 63 – 47 4 4 94.563 60 84 80 – 54 4 4 94.680 60 93.5 96 – 63.5 4 4 117.5
100 60 92.5 49 – 62.5 4 4 117.5
S = stroke
13Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Mounting holes position top/bottom, side, stroke: 100
Piston Ø S=100 L14
S=100 L16
S=100 L16a
S=100 L20
S=100 L24
S=100 L34
S=100 L35
S=100 L36
S=100 ZJ
25 25 91.5 125.5 32 – 29 8 10 68.532 33 86.5 – 42 120 37 8 8 8240 40 100 – 53 – 40 6 6 82.650 48 119 – 63 116 47 6 6 94.563 60 84 127 80 – 54 4 6 94.680 60 93.5 143.5 96 – 63.5 4 6 117.5
100 60 92.5 144.5 119 – 62.5 4 6 117.5
S = stroke
Mounting holes position top/bottom, side, stroke: 125
Piston Ø S=125 L14
S=125 L16
S=125 L16a
S=125 L20
S=125 L24
S=125 L34
S=125 L35
S=125 L36
S=125 ZJ
25 25 91.5 150.5 32 145 29 10 10 84.532 33 119.5 151 42 – 37 8 10 10040 40 140 – 53 – 40 6 8 100.650 48 119 148 63 – 47 6 8 124.563 60 144 – 80 140 54 6 6 124.680 60 153.5 – 96 160 63.5 6 6 145.5
100 60 152.5 – 119 – 62.5 4 6 145.5
S = stroke
Mounting holes position top/bottom, side, stroke: 150
Piston Ø S=150 L14
S=150 L20
S=150 L21
S=150 L23
S=150 L34
S=150 ZJ
25 25 32 24 32 29 84.5
S = stroke
Mounting holes position top/bottom, side, stroke: 160
Piston Ø S=160 L14
S=160 L16
S=160 L16a
S=160 L20
S=160 L24
S=160 L34
S=160 L35
S=160 L36
25 25 91.5 185.5 32 180 29 10 10 84.532 33 119.5 186 42 182.5 37 10 10 10040 40 140 184 53 – 40 8 10 100.650 48 167 – 63 176 47 8 8 124.563 60 144 187 80 – 54 6 8 124.680 60 153.5 203.5 96 195 63.5 6 8 145.5
100 60 152.5 204.5 119 195 62.5 6 8 145.5
S = stroke
Mounting holes position top/bottom, side, stroke: 200
14 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø S=200 L14
S=200 L16
S=200 L16a
S=200 L20
S=200 L24
S=200 L34
S=200 L35
S=200 L36
S=200 ZJ
25 25 91.5 225.5 32 220 29 10 10 84.532 33 119.5 226 42 222.5 37 10 10 10040 40 140 224 53 216 40 10 10 100.650 48 167 223 63 – 47 8 10 124.563 60 204 – 80 215 54 8 8 124.680 60 153.5 – 96 – 63.5 6 8 145.5
100 60 212.5 – 119 – 62.5 6 8 145.5
S = stroke
Mounting holes position, size x depth [mm]
Piston Ø A B B1 C Ø D 1) DD E F 1) G 1) H 1)10 M4x6 4 H7x4 4 H7x5x4 M4x6 3.2 17.4 M4x8 M4 – –12 M5x8 4 H7x4 4 H7x5x4 M5x8 4.2 20 M5x8 M4 4.5 4 H916 M5x8 4 H7x4 4 H7x5x4 M5x8 4.2 28.5 M5x8 M4 5.5 4 H920 M6x10 4 H7x4 4 H7x5x4 M6x10 5.2 30.5 M5x10 M5 5.5 4 H925 M6x10 4 H7x4 4 H7x5x4 M6x10 5.5 – M6x12 M6 6.5 4 H832 M8x14 4 H7x4 4 H7x5x4 M8x14 7.4 – M6x12 M8 6.5 4 H840 M8x14 4 H7x4 4 H7x5x4 M8x14 7.4 – M8x16 M8 8.5 4 H850 M10x20 5 H7x5 4 H7x6x5 M10x20 9.3 – M8x16 M8 8.5 4 H863 M10x20 5 H7x5 4 H7x6x5 M10x20 9.3 – M10x20 M10 10.5 5 H880 M12x24 6 H7x6 4 H7x7x6 M12x25 11.2 – M12x25 M12 10.5 5 H8
100 M12x24 6 H7x6 4 H7x7x6 M12x25 11.2 – M12x25 M12 12.5 6 H8
1) Through hole
Guide rod dimensions, plain bearing
Piston Ø S 10–30 D1
S 10–30 ZJ
S 10–50 D1
S 10–50 ZJ
S 25–100 D1
S 25–100 ZJ
S 40–100 D1
S 40–100 ZJ
S 75–100 D1
S 75–100 ZJ
10 13.5 63 – – – – 13.5 63 – –12 – 47.1 – – – – 17.6 64.7 – –16 – 49.5 – – – – 20 69.5 – –20 – 51.5 – – – – 20 71.5 – –25 – – – 57.5 – – – – 11 68.532 – – – – 17 82 – – – –40 – – – – 19 82.6 – – – –50 – – – – 25 94.5 – – – –63 – – – – 19 94.6 – – – –80 – – – – 10.5 117.5 – – – –
100 – – – – 9.5 117.5 – – – –
Piston Ø S>100 D1
S>100 ZJ
DX
10 13.5 63 812 32.6 79.7 1016 35 84.5 1220 35 86.5 1225 27 84.5 1632 35 100 20
S = stroke
15Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø S>100 D1
S>100 ZJ
DX
40 37 100.6 2050 55 124.5 2563 49 124.6 2580 38.5 145.5 32
100 37.5 145.5 32
S = stroke
Play
GPC_001
Piston Ø A 1)10 0.1612 0.1316 0.1320 0.1325 0.1532 0.1540 0.1550 0.1663 0.1680 0.17
100 0.17
1) Piston rod deflection at a stroke of 50 mm and a load of 10 N (mm)
Permissible static side force F [N]F
Lgpc_005
Ø 10, 12: L = 25 mm; Ø 16-100: L = 50 mm
Piston Ø S=10 S=20 S=25 S=30 S=40 S=50 S=75 S=100 S=125 S=150 S=160 S=20010 12 11 11 10 10 9 8 7 – – – –12 28 24 23 21 31 28 22 19 16 13 – –16 63 56 53 51 73 67 55 49 42 35 – –20 63 56 53 51 73 67 55 49 42 35 – –
S = stroke
16 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø S=10 S=20 S=25 S=30 S=40 S=50 S=75 S=100 S=125 S=150 S=160 S=20025 53.2 48.4 – 44.4 41 38.1 59 51.9 65.4 – 57.3 50.132 – – 139 – – 118 103 90.8 116 – 102 90.240 – – 138 – – 118 102 90.4 116 – 102 89.950 – – 218 – – 187 164 146 215 – 191 16963 – – 217 – – 186 163 145 214 – 190 16980 – – 392 – – 342 304 273 356 – 318 284
100 – – 390 – – 341 302 272 354 – 318 284
S = stroke
Permissible static moment M [Nm]M
gpc_004
Piston Ø S=10 S=20 S=25 S=30 S=40 S=50 S=75 S=100 S=125 S=160 S=20010 1.75 1.5 1.4 1.3 1.2 1.1 0.85 0.75 – – –12 0.56 0.48 0.46 0.42 0.62 0.56 0.44 0.38 0.32 0.26 –16 1.48 1.32 1.25 1.2 1.72 1.57 1.29 1.15 0.99 0.82 –20 1.7 1.51 1.43 1.38 1.97 1.81 1.49 1.32 1.13 0.95 –25 3.11 2.6 – 2.23 1.96 1.74 2.41 2.02 2.42 2.05 1.7532 – – 8.17 – – 6.4 5.26 4.47 5.45 4.67 4.0140 – – 9.19 – – 7.22 5.95 5.05 6.17 5.29 4.5550 – – 17 – – 13.6 11.4 9.73 13.6 11.8 10.363 – – 20.1 – – 16.1 13.4 11.5 16.1 14 12.280 – – 42.1 – – 34.9 29.8 26 32.4 28.5 24.9
100 – – 47.8 – – 39.7 33.9 29.6 37 32.5 28.5
S = stroke
Permissible static moment M [Nm]
MM
M = FxL
LF
LF
GPC_006
Piston Ø S 5–30 S>30 S 35–50 S 55–100 S>10010 1,5 1,5 – – –
S = stroke
17Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø S 5–30 S>30 S 35–50 S 55–100 S>10012 2 3.5 – – –16 4.5 14 – – –20 4.5 14 – – –25 4.6 – 4.9 9.4 14.532 15.2 – 16.5 17.2 26.440 15.3 – 15.3 17.2 26.450 26 – 26 28.9 51.663 26 – 26 28.9 51.680 52.1 – 52.1 57.9 90.3
100 52.3 – 52.3 57.9 90.4
S = stroke
GPC combinations
gpc_007
Minimum strokes for cylinder 1 when using 2 assembled guide cylinders
Piston Ø S32 2540 2550 3063 3080 35
100 40
S = stroke
Minimum strokes for cylinder 2 when using 2 assembled guide cylinders
Piston Ø Ø 2 A B 310 12 ‒ ‒ M4x1212 16 ‒ ‒ M5x1516 20 ‒ ‒ M5x1820 25 ‒ ‒ M6x2025 32 25 15 M6x20
A = min.stroke: assembly A B = min.stroke: assembly B 3 = screw
18 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 100 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø Ø 2 A B 332 40 30 30 M8x2540 50 30 30 M8x3050 63 55 30 M10x3063 80 55 55 M10x3580 100 55 30 M12x40
A = min.stroke: assembly A B = min.stroke: assembly B 3 = screw
19Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
00106713
a11
Ambient temperature min./max. -10°C / +70°CMedium temperature min./max. -10°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pressure for determining piston forces 6,3 bar
Materials:Housing Aluminum, anodizedSeal PolyurethaneFront plate Steel galvanizedGuide rod Steel, hardenedBearing Steel, hardenedPiston rod Stainless steel
Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants.■ The product is a part of the EasyHandling system.
Piston Ø [mm] 10 12 16 20 25Port M5 M5 M5 M5 G 1/8Working pressure min./max. [bar] 2 / 8 2 / 8 2 / 8 2 / 8 1.5 / 8Retracting piston force [N] 42 53 95 148 260Extracting piston force [N] 49 71 127 198 309Speed max. [m/s] 0.5 0.5 0.5 0.5 0.8Impact energy [J] 0.04 0.1 0.11 0.15 0.35
Piston Ø [mm] 32 40 50 63Port G 1/8 G 1/8 G 1/4 G 1/4Working pressure min./max. [bar] 1.3 / 8 1 / 8 1 / 8 1 / 8Retracting piston force [N] 435 720 1110 1837Extracting piston force [N] 507 792 1237 1964Speed max. [m/s] 0.6 0.6 0.6 0.6Impact energy [J] 0.4 0.52 0.64 0.75
20 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston ØPiston rod Ø
104
126
168
2010
2510
Stroke 10 R402000314 0822060100 0822061100 0822062100 082206310020 R402000316 0822060101 0822061101 0822062101 082206310125 R402000317 0822060107 0822061107 0822062107 082206310730 R402000318 0822060102 0822061102 0822062102 082206310240 R402000320 0822060103 0822061103 0822062103 082206310350 R402000322 0822060104 0822061104 0822062104 082206310475 R402000327 0822060105 0822061105 0822062105 0822063105
100 R402000332 0822060106 0822061106 0822062106 0822063106125 - 0822060124 0822061124 0822062124 0822063124150 - 0822060129 0822061129 0822062129 0822063129160 - - - - 0822063131200 - - - - 0822063139
Piston ØPiston rod Ø
3212
4012
5016
6316
Stroke 10 - - - -20 - - - -25 0822064100 0822065100 0822066100 082206710030 - - - -40 - - - -50 0822064101 0822065101 0822066101 082206710175 0822064102 0822065102 0822066102 0822067102
100 0822064103 0822065103 0822066103 0822067103125 0822064104 0822065104 0822066104 0822067104150 - - - -160 0822064105 0822065105 0822066105 0822067105200 0822064106 0822065106 0822066106 0822067106
21Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Weight [kg] Piston Ø 10 12 16 20 25Stroke 10 0.19 0.28 0.36 0.48 0.9
20 0.22 0.32 0.41 0.54 0.9325 0.23 0.35 0.44 0.58 -30 0.24 0.37 0.47 0.61 1.0340 0.27 0.43 0.56 0.72 1.1350 0.29 0.48 0.61 0.79 1.2275 0.36 0.59 0.74 0.95 1.45
100 0.42 0.7 0.88 1.12 1.69125 - 0.82 1.03 1.35 1.95150 - 0.94 1.16 1.47 -160 - - - - 2.28200 - - - - 2.67
Piston Ø 32 40 50 63Stroke 10 - - - -
20 - - - -25 1.44 1.72 2.7 3.5530 - - - -40 - - - -50 1.77 2.1 3.2 4.275 2.1 2.5 3.9 4.96
100 2.41 2.9 4.4 5.56125 2.77 3.3 5 6.27150 - - - -160 3.22 3.76 5.8 7.1200 3.74 4.4 6.6 8
22 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Dimensions, Ø 10 - 20
B-B A-A
C-C
L19
L20
(L20
)
L21
L22
L24
L29
L25
L4A
B
B
B
B1
B1
C PL
PL
L13
L14
(L14
)
L15
PL
LM1
LM2
ZA+S
D1
PL
ZJ+S
L17
L18
LJ2LJ2 LJ1
DX
D2
DD
D4
D
*K
E
1A A
3
2
B
E
K
L7
L5
E1L1
B
4
A-AL8
L9
L10
L11
L12
L6
L3
L2
d RT
LB
LA
FG
H HL30
L26
L27
LM3
E2
LM4
L28
L31
T
A1C
K
A
TT
1)
2)
2)
17230
* Suitable for screws according to ISO 47621) Only Ø 20 threaded hole2) M4 mounting hole for GPC-E accessoriesS = strokeNote: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants.
Piston Ø A1 D2 D4 E1 E2 K L1 L2 L3 L4 L5 L610 – 7 – 50 21 M5 20 ±0,04 10.5 3 – 20 1512 – 14.5 40 58 30.5 M5 23 ±0,04 15 4 22 50 2216 135° 15.8 47 68 33 M5 28 ±0,04 16.5 4 25 61 2520 135° 16.5 54 80 36 M5 30 ±0,04 18 3.5 24 70 29
23Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø L7 L8 L9 L10 L11 L12 L13 L14 S=10
L14 S=20
L14 S>20
L15 S=40
L15 S>40
L17
10 – – – – – – 15 – 20 20 55 55 1512 – – – – – – 14.5 – 18 22 – 58.5 416 43 6.15 12 1.5 1.5 5.5 14 18 25 25 – 64 420 50 6.15 12 1.5 1.5 5.5 15 16 24 24 – 63 4.5
Piston Ø L18 L19 L20 S=10
L20 S>10
L21 S=10
L21 S>10
L22 S≤40
L22 S>40
L24 S=10
L24 S>10
L25 L26 L27
10 – 8 20 20 13 1) 13 48 48 25 25 20 – 2012 22 8 20 20 18 18 – 48 25.5 25.5 20 – 4016 25 8 18 25 20.5 20.5 – 58 26.5 26.5 25 20 4020 24 8 20 30 18 23 – 68 23 27 30 25 50
Piston Ø L28 L29 L30 L31 LJ1 LJ2 LM1 LM2 LM3 LM4 PL T TT10 10 20 – – 15.5 15 5 13.5 48 19 8 5.5 –12 20 20 – – 24.8 17.5 8 12.7 55 27 8.5 5 –16 20 25 20 ±0,04 22 27 21 8 13.5 65 30 8.8 6.5 N620 25 30 25 ±0,04 25 26.5 25 10 15.5 77 33 10 5.5 N6
Piston Ø ZA10 3612 34.416 3620 36
S = strokeTo determine the cylinder length (ZA) for intermediate strokes (i.e. stroke 10 with dia. 40), the next available standard stroke size must be used1) Two holes C-C 10 mm.
24 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Dimensions, Ø 25 - 100
0822xxxxxx
L34
B1
A K
B
DC
L25
L18
L17 D4
L35 LJ2L36
*
LJ1
L21
L20
L23
L24
PL4
PL3
L15
L16L1
4L1
3
L19
L22
B
LB
B
A
B1
D2
EE
LM1
PL1
ZA+S
D1
LM2
ZJ+S
PL2
K
C
B1EC
RT
L9
A1
E1
T3
E2
LA
L10
L12L1
1
L7
L5
L3
A-A
BL8
L6
T4
L2
H
GF
T2
L26
L27
LM3
B-B
T1
T L28
LM4
L31T2
L1
L4
L16a
L29
L30TT
17231
* Suitable for screws according to ISO 4762S = strokeNote: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants.
Piston Ø A1 D2 D4 E1 E2 K L1 L2 L3 L4 L5 L6 L725 135° 18 59 95 43 G 1/8 35 ±0,1 20.5 4.5 25 ±0,1 85 34 5232 135° 23 75.6 114 48.5 G 1/8 44 ±0,1 24 5 33 ±0,1 105 26 7040 135° 23 86 124 54.5 G 1/8 53 ±0,15 27 6 40 ±0,15 110 42 8050 135° 27.5 104 148 64 G 1/4 66 ±0,15 32 8 48 ±0,15 133 34.5 9363 135° 35 124 162 78.5 G 1/4 84 ±0,15 39 8 60 ±0,15 147 62 112
25Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø L8 L9 L10 L11 L12 L13 L15 L17 L18 L19 L22 L25 L2625 6.15 12 1.5 1.5 5.5 16.5 25 5.5 25 8 32 32 3032 8.2 16.7 2.2 2.8 9 20.5 33 6.5 33 10 42 42 3240 8.2 16.7 2.2 2.8 9 20 40 6 40 10 53 53 4250 8.2 16.7 2.2 2.8 9 23 48 7.5 48 12 63 63 5363 10.2 20.3 6 6 16 24 60 11 60 12 80 80 63
Piston Ø L27 L28 L29 L30 L31 LJ1 LJ2 LM1 LM2 LM3 LM4 PL1 PL225 81 23 32 ±0,1 30 ±0,2 24 29.6 32 10 15.5 93 33 11 1132 97 30 42 ±0,1 32 ±0,2 25 40 40.5 12 18.5 112 43 13.5 13.540 107 30 53 ±0,15 42 ±0,2 32.5 37.8 44 12 19.5 122 43 12 1250 134 40 63 ±0,15 53 ±0,2 40 54.5 50.5 15 23.5 146 52 13 1363 140 48 80 ±0,15 63 ±0,2 48 57 59 15 24 160 67 13.7 13.7
Piston Ø PL3 PL4 T T1 T2 T3 T4 TT ZA25 11 11 6.5 18 ±0,4 32,5 ±0,4 30 ±0,05 20,5 ±0,05 N6 42 1)32 13.5 13.5 8 23 ±0,4 41 ±0,4 35 ±0,05 24 ±0,05 N8 46.540 12 12 8 23 ±0,4 41 ±0,4 35,5 ±0,1 27 ±0,1 N8 4450 13 13 7.5 27,5 ±0,4 47,5 ±0,4 41 ±0,1 32 ±0,1 N8 4663 13.7 13.7 11 35 ±0,4 49,5 ±0,4 39 ±0,1 39 ±0,1 N10 51
S = strokeTo determine the cylinder length (ZA) for intermediate strokes (i.e. stroke 10 with dia. 40), the next available standard stroke size must be used1) For stroke 150, ZA = 52, for stroke 25, ZA = 47
Mounting holes position top/bottom, side, stroke: 10
Piston Ø S=10 L14
S=10 L20
S=10 L23
S=10 L34
S=10 L35
S=10 L36
S=10 ZJ
25 19 22 30 26 4 4 76.5
S = stroke
Mounting holes position top/bottom, side, stroke: 20
Piston Ø S=20 L14
S=20 L20
S=20 L35
S=20 L36
S=20 ZJ
25 25 22 4 4 76.5
S = stroke
Mounting holes position top/bottom, side, stroke: 25
Piston Ø S=25 L14
S=25 L20
S=25 L35
S=25 L36
S=25 ZJ
25 25 32 4 4 76.532 30 35 4 4 8540 30 30 4 4 8550 25 30 4 4 89.563 28 30 4 4 89.5
S = stroke
26 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Mounting holes position top/bottom, side, stroke: 30
Piston Ø S=30 L14
S=30 L20
S=30 L24
S=30 L34
S=30 L35
S=30 L36
25 25 32 50 29 4 4
S = stroke
Mounting holes position top/bottom, side, stroke: 40
Piston Ø S=40 L14
S=40 L16
S=40 L16a
S=40 L20
S=40 L21
S=40 L24
S=40 L33
S=40 L35
S=40 L36
S=40 ZJ
25 25 41.5 65.5 32 24 60 65.5 6 6 86.5
S = stroke
Mounting holes position top/bottom, side, stroke: 50
Piston Ø S=50 L14
S=50 L16
S=50 L20
S=50 L21
S=50 L24
S=50 L34
S=50 L35
S=50 L35
S=50 ZJ
25 25 66.5 32 24 70 29 6 6 86.532 33 – 42 31 – 37 4 4 8540 40 – 53 36.5 – 40 4 4 8550 48 – 30 27 – 47 4 4 89.563 28 – 30 27 – 38 4 4 89.5
S = stroke
Mounting holes position top/bottom, side, stroke: 75
Piston Ø S=75 L14
S=75 L16
S=75 L20
S=75 L24
S=75 L34
S=75 L35
S=75 L36
S=75 ZJ
25 25 91.5 32 95 29 8 8 86.532 33 86.5 42 – 37 6 6 10040 40 100 53 91 40 6 6 100.550 48 61 63 – 47 4 4 115.563 60 84 80 – 54 4 4 115.5
S = stroke
Mounting holes position top/bottom, side, stroke: 100
Piston Ø S=100 L14
S=100 L16
S=100 L16a
S=100 L20
S=100 L24
S=100 L34
S=100 L35
S=100 L36
S=100 ZJ
25 25 91.5 125.5 32 – 29 8 10 86.532 33 86.5 – 42 120 37 8 8 10040 40 100 – 53 – 40 6 6 100.550 48 119 – 63 116 47 6 6 115.563 60 84 127 80 – 54 4 6 115.5
S = stroke
27Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Mounting holes position top/bottom, side, stroke: 125
Piston Ø S=125 L14
S=125 L16
S=125 L16a
S=125 L20
S=125 L24
S=125 L34
S=125 L35
S=125 L36
S=125 ZJ
25 25 91.5 150.5 32 145 29 10 10 104.532 33 119.5 151 42 – 37 8 10 11640 40 140 – 53 – 40 6 8 116.550 48 119 148 63 – 47 6 8 113.563 60 144 – 80 140 54 6 6 113.5
S = stroke
Mounting holes position top/bottom, side, stroke: 150
Piston Ø S=150 L14
S=150 L20
S=150 L21
S=150 L23
S=150 L34
S=150 ZJ
25 25 32 24 32 29 104.5
S = stroke
Mounting holes position top/bottom, side, stroke: 160
Piston Ø S=160 L14
S=160 L16
S=160 L16a
S=160 L20
S=160 L24
S=160 L34
S=160 L35
S=160 L36
S=160 ZJ
25 25 91.5 185.5 32 180 29 10 10 104.532 33 119.5 186 42 182.5 37 10 10 11640 40 140 184 53 – 40 8 10 116.550 48 167 – 63 176 47 8 8 133.563 60 144 187 80 – 54 6 8 133.5
S = stroke
Mounting holes position top/bottom, side, stroke: 200
Piston Ø S=200 L14
S=200 L16
S=200 L16a
S=200 L20
S=200 L24
S=200 L34
S=200 L35
S=200 L36
S=200 ZJ
25 25 91.5 225.5 32 220 29 10 10 104.532 33 119.5 226 42 222.5 37 10 10 11640 40 140 224 53 216 40 10 10 116.550 48 167 223 63 – 47 8 10 133.563 60 204 – 80 215 54 8 8 133.5
S = stroke
Mounting holes position, size x depth [mm]
Piston Ø A B B1 C Ø D 1) DD E F 1) Ø G 1) Ø J 1)10 M4x6 4 H7x4 4 H7x5x4 M4x6 3.2 17.4 M4x8 M4 – –12 M5x8 4 H7x4 4 H7x5x4 M5x8 4.2 20 M5x8 M4 4.5 4 H916 M5x8 4 H7x4 4 H7x5x4 M5x8 4.2 28.5 M5x8 M4 5.5 4 H920 M6x10 4 H7x4 4 H7x5x4 M6x10 5.2 30.5 M5x10 M5 5.5 4 H925 M6x10 4 H7x4 4 H7x5x4 M6x10 5.5 – M6x12 M6 6.5 4 H832 M8x14 4 H7x4 4 H7x5x4 M8x14 7.4 – M6x12 M8 6.5 4 H840 M8x14 4 H7x4 4 H7x5x4 M8x14 7.4 – M8x16 M8 8.5 4 H8
1) Through hole
28 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø A B B1 C Ø D 1) DD E F 1) Ø G 1) Ø J 1)50 M10x20 5 H7x5 4 H7x6x5 M10x20 9.3 – M8x16 M8 8.5 4 H863 M10x20 5 H7x5 4 H7x6x5 M10x20 9.3 – M10x20 M10 10.5 5 H8
1) Through hole
Guide rod dimensions, ball bearing
Piston Ø S=10 D1
S=10 ZJ
S=10–30 D1
S=10–30 ZJ
S=20–30 D1
S=20–30 ZJ
S=25–50 D1
S=25–50 ZJ
S=40–100 D1
S=40–100 ZJ
S=75–100 D1
10 – – 13.5 63 – – – – 13.5 63 –12 – – 0 47.1 – – – – 18.4 65.5 –16 – – 0 49.5 – – – – 20.8 70.3 –20 – – 0 51.5 – – – – 20.8 72.3 –25 9 76.5 – – 19 76.5 – – 29 86.5 –32 – – – – – – 20 85 – – 3540 – – – – – – 21.5 85 – – 3750 – – – – – – 20 89.5 – – 4663 – – – – – – 14 89.5 – – 40
Piston Ø S=75–100 ZJ
S>100 D1
S>100 ZJ
DX
10 – 13.5 63 612 – 33.4 80.5 816 – 35.8 85.3 1020 – 35.8 87.3 1025 – 47 104.5 1232 100 51 116 1640 100.5 53 116.5 1650 115.5 64 133.5 2063 115.5 58 133.5 20
S = stroke
Play
GPC_001
Piston Ø 1)10 0.2112 0,0916 0,0920 0,0925 0,0832 0,0840 0,09
1) Piston rod deflection at a stroke of 50 mm and a load of 10 N (mm)
29Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø 1)50 0,0963 0,09
1) Piston rod deflection at a stroke of 50 mm and a load of 10 N (mm)
Permissible static side force F [N]F
Lgpc_005
Ø 10, 12: L = 25 mm; Ø 16-100: L = 50 mm
Piston Ø S=10 S=20 S=25 S=30 S=40 S=50 S=75 S=100 S=125 S=150 S=160 S=20010 10 9 8 8 7 6 5 5 – – – –12 19 17 16 15 23 22 20 19 19 17 – –16 27 24 23 22 58 56 51 48 44 40 – –20 27 24 23 22 58 56 51 48 44 40 – –25 81.4 75 – 69.5 82.3 77.4 67.3 59.5 73.2 – 64.5 56.832 – – 89.9 – – 76.1 93.2 83 94.9 – 84 74.340 – – 89.2 – – 75.6 92.7 82.7 94.5 – 83.7 74.150 – – 110 – – 94 135 121 136 – 121 10863 – – 110 – – 93.5 134 120 135 – 121 107
S = stroke
Permissible static moment M [Nm]M
gpc_004
Piston Ø S=10 S=20 S=25 S=30 S=40 S=50 S=75 S=100 S=125 S=160 S=20010 0.35 0.31 0.29 0.27 0.25 0.23 0.17 0.14 – – –12 0.38 0.34 0.32 0.3 0.46 0.44 0.4 0.38 0.36 0.34 –16 0.63 0.56 0.54 0.52 1.36 1.32 1.2 1.13 1.03 0.94 –20 0.73 0.65 0.62 0.59 1.57 1.51 1.38 1.3 1.19 1.08 –25 4.19 3.65 3.23 3.23 3.56 3.26 2.68 2.28 2.67 2.29 1.9732 – – 5.33 – – 4.15 4.67 4.02 4.4 3.8 3.2840 – – 5.99 – – 4.68 5.27 4.54 4.99 4.3 3.7250 – – 8.83 – – 6.96 9.07 7.91 8.55 7.45 6.563 – – 10.4 – – 8.23 10.8 9.38 10.2 8.85 7.72
S = stroke
30 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Permissible static moment M [Nm]
MM
M = FxL
LF
LF
GPC_006
Piston Ø S=5–30 S>30 S=35–50 S=55–100 S>10010 0.8 0.8 – – –12 1.5 2 – – –16 2 5 – – –20 2 5 – – –25 7.5 – 10.6 10.8 16.532 9.9 – 10.6 16.2 2240 9.9 9.9 9.9 16.2 2250 12.8 12.8 12.8 24.6 32.963 12.8 12.8 12.8 24.6 32.9
S = stroke
GPC combinations
gpc_007
Minimum strokes for cylinder 1 when using 2 assembled guide cylinders
Piston Ø S32 2540 2550 3063 30
S = stroke
31Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-BV▶ Ø 10 - 63 mm ▶ double-acting ▶ ball bearing ▶ cushioning: elastic ▶ with magnetic piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Minimum strokes for cylinder 2 when using 2 assembled guide cylinders
Piston Ø Ø 2 A B 310 12 ‒ ‒ M4x1212 16 ‒ ‒ M5x1516 20 ‒ ‒ M5x1820 25 ‒ ‒ M6x2025 32 25 15 M6x2032 40 30 30 M8x2540 50 30 30 M8x3050 63 55 30 M10x30
A = min.stroke: assembly A B = min.stroke: assembly B 3 = screw
32 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
00131410
a13
Working pressure min./max. 2 bar / 8 barAmbient temperature min./max. +0°C / +65°CMedium temperature min./max. +0°C / +65°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pressure for determining piston forces 6,3 bar
Materials:Housing Aluminum, anodizedSeal PolyurethaneFront plate Steel galvanizedGuide rod Stainless steelBearing Sintered bronzePiston rod Stainless steel
Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ Note: Hydraulic shock absorber on rear side are included in scope of delivery■ The product is a part of the EasyHandling system.
Piston Ø [mm] 12 16 20Port M5 M5 M5Retracting piston force [N] 53 95 148Extracting piston force [N] 71 127 198Speed max. [m/s] 0.5 0.5 0.5Impact energy [J] 0.1 0.11 0.15
Piston ØPiston rod Ø
126
168
2010
Stroke 25 0822060407 0822061407 082206240750 0822060404 0822061404 082206240475 0822060405 0822061405 0822062405
100 0822060406 0822061406 0822062406125 0822060424 0822061424 0822062424150 0822060429 0822061429 0822062429
Weight [kg] Piston Ø 12 16 20Stroke 25 0.49 0.64 0.79
50 0.64 0.84 1.0275 0.78 1.02 1.23
100 0.93 1.19 1.44125 1.07 1.38 1.66150 1.22 1.55 1.86
33Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Dimensions
R-R E-EZ
A+S
D
S4
A3
P9 TT
S1
R8
S3
S6
H
LJ1
P2RR
(L15
) L14
L13
L24
L20
L19
(L22
)
L21
PL1
PL2
PL1
PL2
LM1
LM2
D1+
SA
2
ZJ
+ 2
x S
L26
L25
L17 E1 E2
L18
D3 A1
D4
A
BBD
D
DEE
P2
P3
LM4
P7
P8
P5
P6
P1
Ø4H9
P4
LM3
FG
PL3
dgpc_500
S = stroke
Outer dimensions/overall length/connection
Piston Ø D D1 D3 D4 E1 E2 LJ1 LM1 LM2 PL1 PL2 PL3 ZJ12 M5 19.2 10 40 58 30.5 24.8 8 12.7 8.5 8.5 11.5 66.316 M5 25.8 12 47 68 33 27 8 13.5 8.8 8.8 13 75.320 M5 26.8 12 54 80 36 26.5 10 15.5 10 10 15 78.3
Piston Ø ZA12 34.4
34 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø ZA16 3620 36
Mounting holes position top/bottom/side/front/T-groove
Piston Ø A 1) B 1) F G H L13 L14 L15 S=50−150
L17 L18 L19 L20 L21
12 M5x8 4 H7x4 M4 – M4 14.5 22 58.5 4 22 8 20 1816 M5x8 4 H7x4 M4 5.5 M4 14 25 64 4 25 8 25 20.520 M6x10 4 H7x4 M5 5.5 M5 15 24 63 4.5 24 8 30 23
Piston Ø L22 S=50−150
L24 L25 L26 LM3 LM4 P1 P2 P3 P4 P5 P6 P7
12 48 25.5 20 19 55 27 40 20 3.5 – – – –16 58 26.5 25 21.5 65 30 40 20 5 20 22 4 1520 68 27 30 25 77 33 50 25 4 25 25 4 16.5
Piston Ø P8 P9 R8 S1 1) S3 S4 S6 TT12 1.5 1.5 – M5x8 4.2 20.3 7.6 –16 1.5 1.5 43 M5x8 4.2 28.5 7.6 N620 1.5 1.5 50 M6x10 5.2 30.5 9.5 N6
1) Dimension x depthS = stroke
Stroke adjustment dimensions (rear)
Piston Ø Ø A1 A2 1) A2 2) A3 L 3)12 M8 5 19 13.5 1416 M10 5 29 14.8 2420 M10 5 28 18.5 23
1) Min.2) Max.3) Adjustment length L = A2 max. - A2 min.
Permissible dynamic load m [kg]m
L 1
DGPC_502
35Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
gpc_016
PlayAA
DGPC_503
Piston Ø A 1)12 0.1116 0.1120 0.11
1) Piston rod deflection at a stroke of 50 mm and a load of 10 N (mm)
Permissible static moment M [Nm]M
gpc_004
Permissible lever arm length L1 at 6 bar with static loadF
L 1
DGPC_504
Piston Ø F [N] L1 L212 67 290 2216 120 215 23.720 180 140 27
36 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Permissible lever arm length L1 at 6 bar with dynamic load
F
F L1
L 1
DGPC_505
Piston Ø F [N] F [N] 1) L1 L212 67 23 250 2216 120 40 200 23,720 180 65 125 27
1) Horizontal situation max. force [N]
Permissible static side force F [N]F
DGPC_506
00132215
GPC combinations
DGPC_507
The GPC-E can be directly mounted on the front plate of next bigger standard GPC or GPC-E in radial direction.
37Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ Plain bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø GPC 16, GPC-E 16 GPC 20, GPC-E 20 GPC 2512 GPC-E 12 M5x15 1) – –16 GPC-E 16 – M5x15 1) –20 GPC-E 20 – – M6x15 1)
1) Screw according to ISO 4762 - M4x25
38 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
00131410
a13
Working pressure min./max. 2 bar / 8 barAmbient temperature min./max. +0°C / +65°CMedium temperature min./max. +0°C / +65°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pressure for determining piston forces 6,3 bar
Materials:Housing Aluminum, anodizedSeal PolyurethaneFront plate Steel galvanizedGuide rod Steel, hardenedBearing Steel, hardenedPiston rod Stainless steel
Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ Note: Hydraulic shock absorber on rear side are included in scope of delivery■ The product is a part of the EasyHandling system.
Piston Ø [mm] 12 16 20Port M5 M5 M5Retracting piston force [N] 53 95 148Extracting piston force [N] 71 127 198Speed max. [m/s] 0.5 0.5 0.5Impact energy [J] 0.1 0.11 0.15
Piston ØPiston rod Ø
126
168
2010
Stroke 25 0822060507 0822061507 082206250750 0822060504 0822061504 082206250475 0822060505 0822061505 0822062505
100 0822060506 0822061506 0822062506125 0822060524 0822061524 0822062524150 0822060529 0822061529 0822062529
Weight [kg] Piston Ø 12 16 20Stroke 25 0.43 0.57 0.72
50 0.58 0.76 0.9575 0.7 0.91 1.12
100 0.82 1.07 1.31125 0.95 1.23 1.5150 1.07 1.38 1.69
39Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Dimensions
R-R E-EZ
A+S
D
S4
A3
P9 TT
S1
R8
S3
S6
H
LJ1
P2RR
(L15
) L14
L13
L24
L20
L19
(L22
)
L21
PL1
PL2
PL1
PL2
LM1
LM2
D1+
SA
2
ZJ
+ 2
x S
L26
L25
L17 E1 E2
L18
D3 A1
D4
A
BBD
D
DEE
P2
P3
LM4
P7
P8
P5
P6
P1
Ø4H9
P4
LM3
FG
PL3
dgpc_500
S = stroke
Outer dimensions/overall length/connection
Piston Ø D D1 D3 D4 E1 E2 LJ1 LM1 LM2 PL1 PL2 PL3 ZJ12 M5 19.2 8 40 58 30.5 24.8 8 12.7 8.5 8.5 11.5 66.316 M5 25.8 10 47 68 33 27 8 13.5 8.8 8.8 13 75.320 M5 26.8 10 54 80 36 26.5 10 15.5 10 10 15 78.3
Piston Ø ZA12 34.4
40 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø ZA16 3620 36
Mounting holes position top/bottom/side/front/T-groove
Piston Ø A 1) B 1) F G L13 L14 L15 S 50–150
L17 L18 L19 L20 L21 L22 S 50–150
12 M5x8 4 H7x4 M4 – 14.5 22 58.5 4 22 8 20 18 4816 M5x8 4 H7x4 M4 5.5 14 25 64 4 25 8 25 20.5 5820 M6x10 4 H7x4 M5 5.5 15 24 63 4.5 24 8 30 23 68
Piston Ø L24 L25 L26 LM3 LM4 P1 P2 P3 P4 P5 P6 P7 P812 25.5 20 19 55 27 40 20 3.5 – – – – 1.516 26.5 25 21.5 65 30 40 20 5 20 22 4 15 1.520 27 30 25 77 33 50 25 4 25 25 4 16.5 1.5
Piston Ø P9 R8 S1 1) S3 S4 S6 TT12 1.5 – M5x8 4.2 20 7.6 –16 1.5 43 M5x8 4.2 28.5 7.6 N620 1.5 50 M6x10 5.2 30.5 9.5 N6
1) Dimension x depthS = stroke
Stroke adjustment dimensions (rear)
Piston Ø Ø A1 A2 1) A2 2) A3 L 3)12 M8 5 19 13.5 1416 M10 5 29 14.8 2420 M10 5 28 18.5 23
1) Min.2) Max.3) Adjustment length L = A2 max. - A2 min.
Permissible dynamic load m [kg]m
L 1
DGPC_502
41Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
gpc_017
Play
AA
DGPC_503
Piston Ø A 1)12 0.116 0.0820 0.08
1) Piston rod deflection at a stroke of 50 mm and a load of 10 N (mm)
Permissible static moment M [Nm]M
gpc_004
Permissible lever arm length L1 at 6 bar with static loadF
L 1
DGPC_504
Piston Ø F [N] L112 67 11516 120 8020 180 55
42 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Permissible lever arm length L1 at 6 bar with dynamic load
F
F L1
L 1
DGPC_505
Piston Ø F [N] F [N] 1) L112 67 23 10016 120 40 7520 180 65 50
1) Horizontal situation max. force [N]
Permissible static side force F [N]F
DGPC_506
00132214
GPC combinations
DGPC_507_a
The GPC-E can be directly mounted on the front plate of next bigger standard GPC or GPC-E in radial direction.
43Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-E▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Piston Ø GPC 16, GPC-E 16 GPC 20, GPC-E 20 GPC 2512 GPC-E 12 M5x15 1) – –16 GPC-E 16 – M5x15 1) –20 GPC-E 20 – – M6x15 1)
1) Screw according to ISO 4762 - M4x25
44 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-ST▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
PGPC_050
a13
Working pressure min./max. 2 bar / 8 barAmbient temperature min./max. +0°C / +65°CMedium temperature min./max. +0°C / +65°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pressure for determining piston forces 6,3 bar
Materials:Housing Aluminum, anodizedSeal PolyurethaneFront plate Steel galvanizedGuide rod Steel, hardenedBearing Steel, hardenedPiston rod Stainless steel
Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ The product is a part of the EasyHandling system.
Piston Ø [mm] 12 20Port M5 M5Retracting piston force [N] 53 148Extracting piston force [N] 71 198Speed max. [m/s] 0.5 0.5Impact energy [J] 0.1 0.15Max. play with locked end position [mm] 0.08 0.07
Piston ØPiston rod Ø
126
2010
Stroke 35 R402000243 R40200024950 R402000244 R40200025075 R402000245 R402000251
100 R402000246 R402000252125 R402000247 R402000253150 R402000248 R402000254
Weight [kg] Piston Ø 12 20Stroke 35 0.43 0.72
50 0.58 0.9575 0.7 1.12
100 0.82 1.31125 0.95 1.5150 1.07 1.69
45Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-ST▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Ø 12
SS
RR
R-R S-S
51 1,5
21,3
1,5
18
28 20
1,5
20
8,5 12
6
55,4
+ 2
x S
67,4
+ 2
x S
17,4
+ 2
x S
40
34,4
+ 2
x S
D
AC
Max
17,
5M
ax 1
7,5
B
M5x8
9 H7 x 2,1
M5
23
5
10
9 H87 1,5
20
TT
64,5
2,1
5,3
22,7
20
40
gpc_st_12
S = stroke
Piston Ø A 1) A 2) B 1) B 2) C 1) C 2) D 1) D 2)12 4.7 24.7 4.2 24.2 S–40 S 25+0,5xS 48+0,5xS
1) Min. 2) Max. S = stroke
46 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-ST▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Ø 20
gpc_st_20
S = stroke
Piston Ø A 1) A 2) B 1) B 2) C 1) C 2) D 1) D 2)20 5.5 35.5 9.5 35.5 S–56 S 30,5+0,5xS 60,5+0,5xS
1) Min. 2) Max. S = stroke
47Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-ST▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Permissible dynamic load m [kg]
H
vm
mH
GPC_021
The load creates a high moment on the unit when reaching the end positions. It is therefore necessary not to exceed the limitations showed below. Following parameters must be considered: velocity, distance to center of mass and size of GPC-ST. When multiplying the mass m [kg] with the distance H [mm] the result must not exceed the values below. Example: A load of 2,3 kg shall be mounted with L 52 mm on a GPC-ST dia. 20 stroke 50. m x H; 2,3 x 52 = 120. From the table below we can see that this is allowed for a velocity of 0,3 m/s.
Piston Ø S 0,2 [m/s]
0,3 [m/s]
0,4 [m/s]
0,5 [m/s]
12 35 155 75 60 5012 50 225 100 90 6012 75 310 160 110 8512 100 350 170 130 10512 125 450 250 180 14012 150 600 300 200 160
S = stroke
Piston Ø S 0,2 [m/s]
0,3 [m/s]
0,4 [m/s]
0,5 [m/s]
20 35 195 95 75 9520 50 28 125 110 7520 75 390 200 140 11020 100 440 210 160 13020 125 560 310 225 17520 150 750 375 250 200
S = stroke
48 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Guide cylinder, Series GPC-ST▶ Ø 12 - 20 mm ▶ double-acting ▶ ball bearing ▶ cushioning: hydraulic, non-adjustable ▶ with magnetic piston ▶ Easy‒2‒Combine-capable with connection kit
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Maximum permissible force F and deflection D with static loadF
D
GPC_020
Piston Ø F [N] S=35 D
S=50 D
S=75 D
S=100 D
S=125 D
S=150 D
12 170 0.02 0.02 0.05 0.09 0.15 0.2320 260 0.01 0.02 0.04 0.07 0.12 0.19
S = stroke
49Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Accessories overview
Overview drawing
GPC
ST6 1)
ST4 2)
SN3 1)
00136568
1) ≤ Ø12 mm2) Only for Ø10 mmNOTE: This overview drawing is only for orientation to see where the various accessory parts can be fastened to the cylinder. The illustration has been simplified for this purpose. It is thus not possible to derive the dimensions from this overview.
50 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Easy‒2‒Combine, Connection kit▶ For combination: GPC-E / GSP
00120641
centering pins 2) Steel, hardenedCentering sleeve Stainless steelSubbase Aluminum, anodizedScrews 1) Steel, galvanized
1) ISO 4762:20042) ISO 2338:1997
Technical Remarks■ The product is a part of the EasyHandling system.
Easy‒2‒Combine basic Easy‒2‒Combine add-on part Easy‒2‒Combine kit Weight Part No.[kg]
GPC-E-12GSP-P-08 CK1-LI-26
0.04R412000761
GSP-A-10, GSP-P-10, GSP-R-10 CK1-LI-27 R412000762
GPC-E-16GSP-A-10, GSP-P-10, GSP-R-10 CK1-LI-28 0.06 R412000763GSP-A-16, GSP-P-16, GSP-R-16 CK1-LI-29 0.05 R412000770
GPC-E-20 GSP-A-16, GSP-P-16, GSP-R-16 CK1-LI-30 0.07 R412000765
front mounting: GSP-A/-P/-R
0012058700120588
51Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
CK1-LI-26 / -27 CK1-LI-28 / -30
00120629
00120630
CK1-LI-29
00123246
Easy‒2‒Combine kit B1 B2 H1 L1CK1-LI-26 27 10 8 55CK1-LI-27 27 10 8 55CK1-LI-28 30 4 8 65CK1-LI-29 30 14 8 65CK1-LI-30 33 6.5 8 77
Scope of delivery: A) connection plate B) screws C) centering sleeves D) centering pins
Easy‒2‒Combine kit A B 1) C DCK1-LI-26 1 x 2 x M3x10; 4 x M4x16 2 x Ø 5 –CK1-LI-27 1 x 2 x M3x10; 4 x M4x16 2 x Ø 5 –CK1-LI-28 1 x 2 x M3x10; 4 x M4x16 2 x Ø 5 2 x 4 m6x12CK1-LI-29 1 x 2 x M3x10; 2 x M4x16 2 x Ø 5 2 x 4 m6x12CK1-LI-30 1 x 2 x M3x10; 4 x M5x16 2 x Ø 5 2 x 4 m6x12
1) tightening torque M3 = 2,2 Nm ± 10%; M4 = 3,5 Nm ± 10%; M5 = 6,0 Nm ± 10%
52 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Easy‒2‒Combine, Connection kit▶ For combination: MSC / GPC-E
00120639
centering pins 2) Steel, hardenedCentering sleeve Stainless steelSubbase Aluminum, anodizedScrews 1) Steel, galvanizedT-groove nut Stainless steel; Steel, galvanized
1) ISO 4762:20042) ISO 2338:1997
Technical Remarks■ The product is a part of the EasyHandling system.
Easy‒2‒Combine basic Easy‒2‒Combine add-on part Easy‒2‒Combine kit Weight Part No.[kg]
GPC-ST-12, GPC-ST-20, MSC-12, RTC-HD 16, RTC-HD 25
GPC-E-12, ZSC-10 CK1-LI-13 0.1 R412004665
GPC-ST-12, GPC-ST-20, GSU-16, MSC-16, MSC-20, RTC-CG 16
GPC-E-16, ZSC-16 CK1-LI-14 0.17 R412004661
GSU-25, MSC-25, RTC-CG 32, RTC-HD 32, RTC-HD 40 GPC-E-20, ZSC-20 CK1-LI-15 0.26 R412004662
front mounting: longitudinal
0012057700120578
53Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
front mounting: transverse
0012057900120580
slide mounting: longitudinal
00120583
00120584
54 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
slide mounting: transverse
00120581
00120582
CK1-LI-13 CK1-LI-14 / -15
00123271_a
00123272_a
Easy‒2‒Combine kit B1 H1 L1 L2CK1-LI-13 49 8 63 0.5CK1-LI-14 64 10 72 4CK1-LI-15 76 12 77.5 1.5
Scope of delivery: A) connection plate B) screws C) centering sleeves D) centering pins E) sliding blocks
Easy‒2‒Combine kit A B 1) C DCK1-LI-13 1 x 4 x M3x16; 4 x M4x10; 4 x M4x30 2 x Ø 7; 2 x Ø 9 2 x 4 m6x12CK1-LI-14 1 x 4 x M4x20; 4 x M4x35; 2 x M5x10;
2 x M5x12; 2 x M5x146 x Ø 9 2 x 4 m6x12
55Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Easy‒2‒Combine kit A B 1) C DCK1-LI-15 1 x 4 x M5x20; 4 x M5x40; 2 x M6x14; 4 x M6x16 4 x Ø 12; 2 x Ø 12-9 2 x 4 m6x12
Easy‒2‒Combine kit ECK1-LI-13 2 x N6 / M4CK1-LI-14 2 x N6 / M5CK1-LI-15 2 x N8 / M6
1) tightening torque M3 = 2,2 Nm ± 10%; M4 = 3,5 Nm ± 10%; M5 = 6,0 Nm ± 10%; M6 = 10 Nm ± 10%
Easy‒2‒Combine, Connection kit▶ For combination: GPC-ST / MSC
00120653
Centering sleeve Stainless steelScrews 1) Steel, galvanizedT-groove nut Stainless steel; Steel, galvanized
1) ISO 4762:2004
Technical Remarks■ The product is a part of the EasyHandling system.
Easy‒2‒Combine basic Easy‒2‒Combine add-on part Easy‒2‒Combine kit Weight Part No.[kg]
CKK/CKR-12-90, CKK/CKR-15-110, CKP-16, CKP-25, GPC-ST-12
MSC-08 CK2-LI-01 0.01 R412004687
CKK/CKR-12-90, CKK/CKR-15-110, CKP-16, CKP-25, GPC-ST-12, GPC-ST-20, RTC-HD 16, RTC-HD 25
MSC-12 CK2-LI-02 0.02 R412004688
GPC-ST-20 MSC-16 CK2-LI-03 0.02 R412004689
56 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
slide mounting: transverse
00120611
00120612
Scope of delivery: A) screws B) centering sleeves C) sliding blocks
Easy‒2‒Combine kit A 1) B CCK2-LI-01 2 x M4x16 2 x Ø 9–7 2 x N6 / M4CK2-LI-02 2 x M5x20 2 x Ø 9 2 x N6 / M5CK2-LI-03 2 x M5x25 2 x Ø 9 2 x N6 / M5
1) tightening torque M4 = 3,5 Nm ± 10%; M5 = 6,0 Nm ± 10%
Easy‒2‒Combine, Connection kit▶ For combination: GPC-ST / GPC-E
00120642
centering pins 2) Steel, hardenedCentering sleeve Stainless steelSubbase Aluminum, anodizedScrews 1) Steel, galvanizedT-groove nut Stainless steel
¹) ISO 4762:2004²) ISO 2338:1997
57Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Technical Remarks■ The product is a part of the EasyHandling system.
Easy‒2‒Combine basic Easy‒2‒Combine add-on part Easy‒2‒Combine kit Weight Part No.[kg]
GPC-ST-12, GPC-ST-20, MSC-12, RTC-HD 16, RTC-HD 25
GPC-E-12, ZSC-10 CK1-LI-13 0.1 R412004665
GPC-ST-12, GPC-ST-20, GSU-16, MSC-16, MSC-20, RTC-CG 16
GPC-E-16, ZSC-16 CK1-LI-14 0.17 R412004661
slide mounting: transverse
00120589
00120590
58 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
CK1-LI-13 CK1-LI-14
00123271_a
00123272_b
Easy‒2‒Combine kit B1 H1 L1 L2CK1-LI-13 49 8 63 0.5CK1-LI-14 64 10 72 4
Scope of delivery: A) connection plate B) screws C) centering sleeves D) centering pins E) sliding blocks
Easy‒2‒Combine kit A B 1) C DCK1-LI-13 1 x 4 x M3x16; 4 x M4x10; 4 x M4x30 2 x Ø 7; 2 x Ø 9 2 x 4 m6 x 12CK1-LI-14 1 x 4 x M4x20; 4 x M4x35; 2 x M5x10;
2 x M5x12; 2 x M5x144 x Ø 9 2 x 4 m6 x 12
Easy‒2‒Combine kit ECK1-LI-13 2 x N6 / M4CK1-LI-14 2 x N6 / M5
1) tightening torque M3 = 2,2 Nm ± 10%; M4 = 3,5 Nm ± 10%; M5 = 6,0 Nm ± 10%
59Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Easy‒2‒Combine, Connection kit▶ For combination: GSU / GPC-E
00120644
centering pins 2) Steel, hardenedCentering sleeve Stainless steelSubbase Aluminum, anodizedScrews 1) Steel, galvanizedT-groove nut Stainless steel; Steel, galvanized
1) ISO 4762:20042) ISO 2338:1997
Technical Remarks■ The product is a part of the EasyHandling system.
Easy‒2‒Combine basic Easy‒2‒Combine add-on part Easy‒2‒Combine kit Weight Part No.[kg]
GPC-ST-12, GPC-ST-20, GSU-16, MSC-16, MSC-20, RTC-CG 16
GPC-E-16, ZSC-16 CK1-LI-14 0.17 R412004661
GSU-25, MSC-25, RTC-CG 32, RTC-HD 32, RTC-HD 40 GPC-E-20, ZSC-20 CK1-LI-15 0.26 R412004662
slide mounting: transverse
00120593 00120594
60 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
CK1-LI-14 / -15
00123272_b
Easy‒2‒Combine kit B1 H1 L1 L2CK1-LI-14 64 10 72 4CK1-LI-15 76 12 77.5 1.5
Scope of delivery: A) connection plate B) screws C) centering sleeves D) centering pins E) sliding blocks
Easy‒2‒Combine kit A B 1) C DCK1-LI-14 1 x 4 x M4x20; 4 x M4x35; 2 x M5x10;
2 x M5x12; 2 x M5x146 x Ø 9 2 x 4 m6x12
CK1-LI-15 1 x 4 x M5x20; 4 x M5x40; 2 x M6x14; 4 x M6x16 4 x Ø 12; 2 x Ø 12-9 2 x 4 m6x12
Easy‒2‒Combine kit ECK1-LI-14 2 x N6 / M5CK1-LI-15 2 x N8 / M6
1) tightening torque M4 = 3,5 Nm ± 10%; M5 = 6,0 Nm ± 10%; M6 = 10 Nm ± 10%
61Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Easy‒2‒Combine, Connection kit▶ For combination: RMC-HE / GPC-E
00120649
Centering sleeve Stainless steelSubbase Aluminum, galvanizedScrews 1) Steel, galvanized
1) ISO 4762:2004
Technical Remarks■ The product is a part of the EasyHandling system.
Easy‒2‒Combine basic Easy‒2‒Combine add-on part Easy‒2‒Combine kit Weight Part No.[kg]
GPC-ST-12, GPC-ST-20, MSC-12, RTC-HD 16, RTC-HD 25
GPC-E-12, ZSC-10 CK1-LI-13 0.1 R412004665
GPC-ST-12, GPC-ST-20, GSU-16, MSC-16, MSC-20, RTC-CG 16
GPC-E-16, ZSC-16 CK1-LI-14 0.17 R412004661
GSU-25, MSC-25, RTC-CG 32, RTC-HD 32, RTC-HD 40 GPC-E-20, ZSC-20 CK1-LI-15 0.26 R412004662
slide mounting: transverse
00120603 00120604
62 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
CK1-LI-13 CK1-LI-14 / -15
00123271_a
00123272_a
Easy‒2‒Combine kit B1 H1 L1 L2CK1-LI-13 49 8 63 0.5CK1-LI-14 64 10 72 4CK1-LI-15 76 12 77.5 1.5
Scope of delivery: A) connection plate B) screws C) centering sleeves D) centering pins E) sliding blocks
Easy‒2‒Combine kit A B 1) C DCK1-LI-13 1 x 4 x M3x16; 4 x M4x10; 4 x M4x30 2 x Ø 7; 2 x Ø 9 2 x 4 m6x12CK1-LI-14 1 x 4 x M4x20; 4 x M4x35; 2 x M5x10;
2 x M5x12; 2 x M5x146 x Ø 9 2 x 4 m6x12
CK1-LI-15 1 x 4 x M5x20; 4 x M5x40; 2 x M6x14; 4 x M6x16 4 x Ø 12; 2 x Ø 12-9 2 x 4 m6x12
Easy‒2‒Combine kit ECK1-LI-13 2 x N6 / M4CK1-LI-14 2 x N6 / M5CK1-LI-15 2 x N8 / M6
1) tightening torque M3 = 2,2 Nm ± 10%; M4 = 3,5 Nm ± 10%; M5 = 6,0 Nm ± 10%; M6 = 10 Nm ± 10%
63Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Easy‒2‒Combine, Connection kit▶ For combination: GPC-E / GPC-E
00120640
centering pins 2) Steel, hardenedScrews 1) Steel, galvanized
1) ISO 4762:20042) ISO 2338:1997
Technical Remarks■ The product is a part of the EasyHandling system.
A) product 1, B) product 2, C) screws, D) centering pins
A B C 1) DGPC-E-12 GPC-E-16 4 x M5x16 2 x 4 m6x12GPC-E-16 GPC-E-20 4 x M5x16 2 x 4 m6x12
1) tightening torque M5 = 6,0 Nm ± 10%
front mounting: longitudinal
00120585 00120586
64 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Easy‒2‒Combine, Connection kit▶ For combination: RTC-HD / GPC-E
00129826
Centering sleeve Stainless steelSubbase Aluminum, anodizedScrews 1) Steel, galvanizedT-groove nut Stainless steel; Steel, galvanized
1) ISO 4762:2004
Technical Remarks■ The product is a part of the EasyHandling system.
Easy‒2‒Combine basic Easy‒2‒Combine add-on part Easy‒2‒Combine kit Weight Part No.[kg]
GPC-ST-12, GPC-ST-20, MSC-12, RTC-HD 16, RTC-HD 25
GPC-E-12, ZSC-10 CK1-LI-13 0.1 R412004665
GPC-ST-12, GPC-ST-20, GSU-16, MSC-16, MSC-20, RTC-CG 16
GPC-E-16, ZSC-16 CK1-LI-14 0.17 R412004661
GSU-25, MSC-25, RTC-CG 32, RTC-HD 32, RTC-HD 40 GPC-E-20, ZSC-20 CK1-LI-15 0.26 R412004662
65Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
slide mounting: transverse
00129821 00129822
CK1-LI-13 CK1-LI-14 / -15
00123271_a
00123272_a
Easy‒2‒Combine kit B1 H1 L1 L2CK1-LI-13 49 8 63 0.5CK1-LI-14 64 10 72 4CK1-LI-15 76 12 77.5 1.5
66 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Scope of delivery: A) connection plate B) screws C) centering sleeves D) centering pins E) sliding blocks
Easy‒2‒Combine kit A B 1) C DCK1-LI-13 1 x 4 x M3x16; 4 x M4x10; 4 x M4x30 2 x Ø 7; 2 x Ø 9 2 x 4 m6x12CK1-LI-14 1 x 4 x M4x20; 4 x M4x35; 2 x M5x10;
2 x M5x12; 2 x M5x146 x Ø 9 2 x 4 m6x12
CK1-LI-15 1 x 4 x M5x20; 4 x M5x40; 2 x M6x14; 4 x M6x16 4 x Ø 12; 2 x Ø 12-9 2 x 4 m6x12
Easy‒2‒Combine kit ECK1-LI-13 2 x N6 / M4CK1-LI-14 2 x N6 / M5CK1-LI-15 2 x N8 / M6
1) tightening torque M3 = 2,2 Nm ± 10%; M4 = 3,5 Nm ± 10%; M5 = 6,0 Nm ± 10%; M6 = 10 Nm ± 10%
Centering rings
00112657
Ø1,6 Ø1,6D D
AC ACB
E
Fig. 1 Fig. 2
00119489_a
Part No. Ø A k6
B k6
C ±0,1
D –0,2
E +0,2
Material Delivery quantity
[Piece]
Fig.
R412000669 5 5 – 3,4 3 – Stainless steel 6 Fig. 1R412000668 7 7 – 5,5 3 – Stainless steel 6 Fig. 1R412000670 9 9 – 6,6 4 – Stainless steel 6 Fig. 1R412000671 12 12 – 9,0 4 – Stainless steel 6 Fig. 1R402003731 16 16 – 11 6 – Stainless steel 6 Fig. 1R412004030 5–7 7 5 3,4 3 1,5 Stainless steel 6 Fig. 2R412004032 5–9 9 5 3,4 3,5 1,5 Stainless steel 6 Fig. 2R412004033 7–9 9 7 5,5 3,5 1,5 Stainless steel 6 Fig. 2R412004034 9–12 12 9 6,6 4,0 2 Stainless steel 6 Fig. 2R402003736 12–16 16 12 9 5 2 Stainless steel 6 Fig. 2
67Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Sensor, Series ST4▶ 4 mm groove ▶ with cable ▶ without wire end ferrule, tin-plated
00118444_A
Certificates UL (Underwriters Laboratories)Ambient temperature min./max. -25°C / +75°CProtection class IP 65, IP 67Switching point precision [mm] ±0,1LED status display YellowVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 ms
Materials:Housing PolyamideCable sheath Polyurethane
Type of contact
Cable length
DC operating voltage
min./max.
Operational voltage AC
min./max.
DC switching current, max.
AC switching current, max.
Voltage drop U at Imax
Part No.
[m] [V] [V] [A] [A] [V]
BN
BK
BU
RL
+ / – / ~
– / + / ~Reed
310 / 30 10 / 30 0.1 0.1 I*Rs
08301006405 0830100641
BN
BK
BU
RL
+
–PNP
electronic PNP
310 / 30 - 0.1 - ≤ 2,0
08301006425 0830100643
BN
BK
BU
RL
+
–NPN
electronic NPN
310 / 30 - 0.1 - ≤ 2,0
R4120049895 R412004990
Part No. Protective resistor for reed
Max. switching frequency
Operating current, not switched
Operating current, switched
Note
[Ω] [kHz] [mA] [mA]0830100640
15 0,5 - < 5 1); 2)08301006410830100642
- 1,0 < 5 < 8 3)0830100643R412004989
- 1,0 < 5 < 8 3)R412004990
1) Switching capacity: 3 W / 3 VA2) Protected against polarity reversal3) short circuit resistant; Protected against polarity reversalinterfaces: without wire end ferrule, tin-plated
68 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Dimensions
X
2* 3*
1*
3 x 0,09 mm2
1,8
2,8
3,6
L
30
BNBUBK
9,3
25
00123231_a
1* = switching point 2* = clamping screw 3* = LEDL = cable length BN = brown, BK = black, BU = blueX = electronic: 6 mm, Reed: 10 mm
Sensor, Series ST4▶ 4 mm groove ▶ with cable ▶ Plug, M8, 3-pin
00118444_c
Certificates UL (Underwriters Laboratories)Ambient temperature min./max. -25°C / +75°CProtection class IP 65, IP 67Switching point precision [mm] ±0,1LED status display YellowVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 ms
Materials:Housing PolyamideCable sheath Polyurethane
Type of contact
Cable length
DC operating voltage
min./max.
Operational voltage AC
min./max.
DC switching current, max.
AC switching current, max.
Voltage drop U at Imax
Part No.
[m] [V] [V] [A] [A] [V]
BN
BK
BU
1
4
3
RL
+ / – / ~
– / + / ~Reed 0.3 10 / 30 10 / 30 0.1 0.1 I*Rs 0830100440
BN
BK
BU
1
4
3
RL
+
–PNP
electronic PNP 0.3 10 / 30 - 0.1 - ≤ 2,0 0830100441
BN
BK
BU
1
4
3
RL
+
–NPN
electronic NPN 0.3 10 / 30 - 0.1 - ≤ 2,0 R412004988
Part No. Protective resistor for reed
Max. switching frequency
Operating current, not switched
Operating current, switched
Note
[Ω] [kHz] [mA] [mA]0830100440 15 0,5 - < 5 1); 2)
1) Switching capacity: 3 W / 3 VA2) Protected against polarity reversal3) short circuit resistant; Protected against polarity reversalinterfaces: Plug; M8; 3-pin
69Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Part No. Protective resistor for reed
Max. switching frequency
Operating current, not switched
Operating current, switched
Note
[Ω] [kHz] [mA] [mA]0830100441 - 1,0 < 5 < 8 3)R412004988 - 1,0 < 5 < 8 3)
1) Switching capacity: 3 W / 3 VA2) Protected against polarity reversal3) short circuit resistant; Protected against polarity reversalinterfaces: Plug; M8; 3-pin
Dimensions1 4 3
8
M8
36
L
3*2*
1*
7,625
1,8
X
9,3
1,9*
3,6
2,8
00123231_b
1* = switching point 2* = clamping screw 3* = LEDL = cable lengthX = electronic: 6 mm, Reed: 10 mmPin assignment: 1 = (+), 3 = (-), 4 = (OUT), EN 60947-5-2:1998* Ø 2,9 cable polyvinylchlorid
Sensor, Series ST4▶ 4 mm groove ▶ with cable ▶ Plug, M8, 3-pin, with knurled screw
00118444_B
Certificates UL (Underwriters Laboratories)Ambient temperature min./max. -25°C / +75°CProtection class IP 65, IP 67Switching point precision [mm] ±0,1LED status display YellowVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 ms
Materials:Housing PolyamideCable sheath Polyurethane
Type of contact
Cable length
DC operating voltage
min./max.
Operational voltage AC
min./max.
DC switching current, max.
AC switching current, max.
Voltage drop U at Imax
Part No.
[m] [V] [V] [A] [A] [V]
BN
BK
BU
1
4
3
RL
+ / – / ~
– / + / ~Reed
0.310 / 30 10 / 30 0.1 0.1 I*Rs
R4120045770.5 R412004578
70 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Type of contact
Cable length
DC operating voltage
min./max.
Operational voltage AC
min./max.
DC switching current, max.
AC switching current, max.
Voltage drop U at Imax
Part No.
[m] [V] [V] [A] [A] [V]
BN
BK
BU
1
4
3
RL
+
–PNP
electronic PNP
0.310 / 30 - 0.1 - ≤ 2,0
R4120045800.5 R412004581
Part No. Protective resistor for reed
Max. switching frequency
Operating current, not switched
Operating current, switched
Note
[Ω] [kHz] [mA] [mA]R412004577
15 0,5 - < 5 1); 2)R412004578R412004580
- 1,0 < 5 < 8 3)R412004581
1) Switching capacity: 3 W / 3 VA2) Protected against polarity reversal3) short circuit resistant; Protected against polarity reversalinterfaces: Plug; M8; 3-pin; with knurled screw
Dimensions
X
2* 3*
9,3
1*
1,8
2,8
3,6
1,9
L
M8
~37
4 31
00123231_c
1* = switching point 2* = clamping screw 3* = LEDL = cable lengthX = PNP: 6 mm, reed: 10 mmPin assignment: 1 = (+), 3 = (-), 4 = (OUT), EN 60947-5-2:1998
Sensor, Series ST4▶ 4 mm groove ▶ with cable ▶ Plug, M12, 3-pin, with knurled screw
00118444_B
Certificates UL (Underwriters Laboratories)Ambient temperature min./max. -25°C / +75°CProtection class IP 65, IP 67Switching point precision [mm] ±0,1LED status display YellowVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 ms
Materials:Housing PolyamideCable sheath Polyurethane
71Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Type of contact
Cable length
DC operating voltage
min./max.
Operational voltage AC
min./max.
DC switching current, max.
AC switching current, max.
Voltage drop U at Imax
Part No.
[m] [V] [V] [A] [A] [V]
BN
BK
BU
1
4
3
RL
+ / – / ~
– / + / ~Reed 0.3 10 / 30 10 / 30 0.1 0.1 I*Rs R412010137
BN
BK
BU
1
4
3
RL
+
–PNP
electronic PNP 0.3 10 / 30 - - - ≤ 2,0 R412010138
Part No. Protective resistor for reed
Max. switching frequency
Operating current, not switched
Operating current, switched
Note
[Ω] [kHz] [mA] [mA]R412010137 15 0,5 - < 5 1); 2)R412010138 - 1,0 < 5 < 8 3)
1) Switching capacity: 3 W / 3 VA2) Protected against polarity reversal3) short circuit resistant; Protected against polarity reversalinterfaces: Plug; M12; 3-pin; with knurled screw
Dimensions
X
2* 3*
9,3
1*
1,8
2,8
3,6
1,9
L
M12
~47
4
3
1
00123231_d
1* = switching point 2* = clamping screw 3* = LEDL = cable lengthX = PNP: 6 mm, reed: 10 mmPin assignment: 1 = (+), 3 = (-), 4 = (OUT), EN 60947-5-2:1998
Sensor, Series ST6▶ 6 mm groove ▶ with cable ▶ without wire end ferrule, tin-plated
00112027_2
Ambient temperature min./max. -25°C / +70°CProtection class IP 69KSwitching point precision [mm] ±0,1Switching capacity 3 W / 3 VAVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 ms
Materials:Housing PolyamideCable sheath Polyurethane
72 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Type of contact
Cable length
DC operating voltage
min./max.
Operational voltage AC
min./max.
DC switching current, max.
AC switching current, max.
Voltage drop U at Imax
Part No.
[m] [V] [V] [A] [A] [V]
BN
BK
BU
RL
+ / – / ~
– / + / ~Reed
310 / 30 10 / 30 0,13 0,13 I*Rs
08301006295 0830100630
10 R412004575
BN
BK
BU
RL
+
–PNP
electronic PNP
310 / 30 - 0.1 - ≤ 2,5
08301006315 0830100632
10 R412004576
BN
BK
BU
RL
+
–NPN
electronic NPN
310 / 30 - 0.1 - ≤ 2,5
08301006335 0830100634
Reed 3 10 / 110 10 / 110 0,13 0,13 I*Rs R412007815
BN
BK
BU
RL
+
–PNP
electronic PNP 1.4 10 / 30 - 0.1 - ≤ 2,5 0830100635
Part No. Protective resis-tor for reed
Max. switching frequency
Operating current, not
switched
Operating cur-rent, switched
LED Note
[Ω] [kHz] [mA] [mA]0830100629
15 < 0,3 - < 10 Yellow 1); 3)0830100630R4120045750830100631
- < 1,0 < 20 < 30 Yellow 2); 3)0830100632R4120045760830100633
- < 1,0 < 20 < 30 Yellow 2); 3)0830100634R412007815 15 < 0,3 - < 10 Yellow 1)0830100635 - < 0,1 < 20 < 30 Yellow 1); 3)
1) Protected against polarity reversal2) short circuit resistant; Protected against polarity reversal3) UL (Underwriters Laboratories)interfaces: without wire end ferrule, tin-plated
Dimensions
BNBUBK
L30,5
4,2
2,8
6,2
BNBUBK
40
3 x 0,14 mm2
36 x 0,07 mm2
9,15X
15,3
2*
3*1*
00111942_b
1* = switching point 2* = clamping screw 3* = LEDL = cable length BN = brown, BK = black, BU = blueX = electronic: 6 mm, Reed: 10 mm
73Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Sensor, Series ST6▶ 6 mm groove ▶ with cable ▶ Plug, M12, 3-pin, with knurled screw
00112027_4
Certificates UL (Underwriters Laboratories)Ambient temperature min./max. -25°C / +70°CProtection class IP 65, IP 67Switching point precision [mm] ±0,1Switching capacity 3 W / 3 VALED status display YellowVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 ms
Materials:Housing PolyamideCable sheath Polyurethane
Type of contact
Cable length
DC operating voltage
min./max.
Operational voltage AC
min./max.
DC switching current, max.
AC switching current, max.
Voltage drop U at Imax
Part No.
[m] [V] [V] [A] [A] [V]
BN
BK
BU
1
4
3
RL
+ / – / ~
– / + / ~Reed 0.3 10 / 30 10 / 30 0,13 0,13 I*Rs 0830100432
BN
BK
BU
1
4
3
RL
+
–PNP
electronic PNP 0.3 10 / 30 - 0.1 - ≤ 2,5 0830100433
Part No. Protective resistor for reed
Max. switching frequency
Operating current, not switched
Operating current, switched
Note
[Ω] [kHz] [mA] [mA]0830100432 15 < 0,3 - < 10 1)0830100433 - < 1,0 < 20 < 30 2)
1) Protected against polarity reversal2) short circuit resistant; Protected against polarity reversalinterfaces: Plug; M12; 3-pin; with knurled screw
Dimensions
L 1
3
4
8
M12
47,5
30,5
6,2
4,2
9,252*
3*1*
X
13,7
2,9
Ø
00111942_c
1* = switching point 2* = clamping screw 3* = LEDL = cable lengthX = PNP: 6 mm, reed: 10 mmPin assignment: 1 = (+), 3 = (-), 4 = (OUT), EN 60947-5-2:1998
74 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Sensor, Series ST6▶ 6 mm groove ▶ with cable ▶ Plug, M8, 3-pin, with knurled screw
00112027_5
Certificates UL (Underwriters Laboratories)Ambient temperature min./max. See table belowProtection class IP 65, IP 67Switching point precision [mm] ±0,1Switching capacity 3 W / 3 VALED status display YellowVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 ms
Materials:Housing Polyamide
Type of contact
Cable length
DC operating voltage
min./max.
Operational voltage AC
min./max.
DC switching current, max.
AC switching current, max.
Voltage drop U at Imax
Part No.
[m] [V] [V] [A] [A] [V]
BN
BK
BU
1
4
3
RL
+ / – / ~
– / + / ~Reed
0.310 / 30 10 / 30 0,13
0.1I*Rs
R4120047610.3 0,13 08301004340.5 0,13 0830100436
BN
BK
BU
1
4
3
RL
+
–PNP
electronic PNP
0.310 / 30 - 0.1 - ≤ 2,5
08301004350.3 R4120047620.5 0830100437
BN
BK
BU
1
4
3
RL
+
–NPN
electronic NPN 0.3 10 / 30 - 0.1 - ≤ 2,5 0830100431
BN
BK
BU
1
4
3
RL
+ / – / ~
– / + / ~Reed 0.3 10 / 30 10 / 30 0,13 0.1 I*Rs R412007840
Part No. Ambient tem-perature
min./max.
Protective resis-tor for reed
Max. switching frequency
Operating current, not
switched
Operating cur-rent, switched
Note
[Ω] [kHz] [mA] [mA]R412004761 -25°C / +75°C
15≤ 0,3
- < 10 1)0830100434 -25°C / +70°C < 0,30830100436 -25°C / +70°C < 0,30830100435
-25°C / +70°C - < 1,0 < 20 < 30 2)R41200476208301004370830100431 -25°C / +70°C - < 1,0 < 20 < 30 2)R412007840 -25°C / +75°C 15 ≤ 0,3 - < 10 1); 3)
1) Protected against polarity reversal2) short circuit resistant; Protected against polarity reversal3) Combination: slotted and hexagon socketinterfaces: Plug; M8; 3-pin; with knurled screw
75Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Dimensions1 4 3
8
M8
37
30,5 L
9,252*
3*1*
X
13,7
6,2
4,2
2,9
Ø
00111942_d
1* = switching point 2* = clamping screw 3* = LEDL = cable lengthX = electronic: 6 mm, Reed: 10 mmPin assignment: 1 = (+), 3 = (-), 4 = (OUT), EN 60947-5-2:1998
Sensor, Series SN3▶ Plug, M12, 3-pin ▶ welding-proof
00118461
Ambient temperature min./max. -25°C / +70°CProtection class IP 67, IP 65Switching point precision [mm] ±0,1Nominal current, actuated state mA ≤ 10Nominal current, idle state mA ≤ 5LED status display YellowVibration resistance 55 Hz, 1 mmShock resistance 30 g / 11 ms
Materials:Housing Polyamide
Type of contact DC operating voltage
min./max.
DC switching cur-rent, max.
Voltage drop U at Imax
Max. switching frequency
Part No.
[V] [A] [V] [kHz]
electronic PNP 10 / 30 0,2 ≤ 1,8 0,02 0830100438
interfaces: Plug; M12; 3-pinshort circuit resistant; Protected against polarity reversal
76 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
DimensionsM12
4,8
17,5
17
5
3*
2*
28
6
23,5
21,5
2,5
10
14
4 13
00118449
2* = clamping screw3* = LEDPin assignment: 1 = (+), 3 = (-), 4 = (OUT), EN 60947-5-2:1998
SN3, Sensor mounting▶ for Series SN3 ▶ to mount on cylinder Series PRA, KPZ, GPC, CCI, KHZ
00112453
00122794
1) Clamping screw 2) Mounting screw for sensor 3) Sensor
Part No. For series 1) MA1 [Nm] Material Weight[kg]
1827020386 SN3 M3x25 1,8 +0,4 Aluminum 0.007
77Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
T-groove nut▶ for CKP, GPC, RTC
00127083
Mge0312b7
Part No. Type For series 2) Material Weight[kg]
Note
3842523140 N6 CKP, GPC, RTC
M4 Steelgalvanized
0.003 -
3842523142 N6 CKP, GPC, RTC
M5 Steelgalvanized
0.003 -
3842523145 N6 CKP, GPC, RTC
- spring steel 0.019 1)
3842514928 N8 CKP, GPC, RTC
M4 Steelgalvanized
0.009 -
3842514929 N8 CKP, GPC, RTC
M5 Steelgalvanized
0.008 -
3842514930 N8 CKP, GPC, RTC
M6 Steelgalvanized
0.008 -
3842514931 N8 CKP, GPC, RTC
M8 Steelgalvanized
0.007 -
3842516685 N8 CKP, GPC, RTC
- spring steel 0.019 1)
3842528735 N10 CKP, GPC, RTC
M8 Steelgalvanized
0.018 -
3842528738 N10 CKP, GPC, RTC
M6 Steelgalvanized
0.025 -
3842528741 N10 CKP, GPC, RTC
M5 Steelgalvanized
0.019 -
3842516669 N10 CKP, GPC, RTC
- spring steel 0.019 1)
1) Spring2) Thread connectionFor N4 grooves on CKP 16 a square nut according to DIN 557 can be used.
Groove lock profile
00105175
00111999
78 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Part No. Ø Material1821321009 12-100 Acrylonitrile butadiene
styrene
Connecting cable, Series CN2▶ Socket, M8, 3-pin ▶ open cable ends, 3-pin ▶ straight
00107009_b
Ambient temperature min./max. -40°C / +85°CProtection class IP 65
Materials:Cable sheath Polyurethane
Technical Remarks■ The specified protection class is valid only in assembled and tested state.
Electrical interface Max. current Number of wires
Wire cross-section
Cable exit Part No.
[Port 1] [Port 2] [A] [mm²]1
34
BN
BUBK
Socket, M8, 3-pin
open cable ends, 3-pin 4 3 0.24 straight 180°
18344841661834484168
1834484247
Part No. Cable-Ø Cable length L Weight[mm] [m] [kg]
18344841664.5
3 0.0911834484168 5 0.1451834484247 10 0.33
Dimensions
00105612_a
(1) BN=brown (3) BU=blue (4) BK=blackL = length
79Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Connecting cable, Series CN2▶ Socket, M8, 3-pin ▶ open cable ends, 3-pin ▶ angled
00107009_c
Ambient temperature min./max. -40°C / +85°CProtection class IP 65
Materials:Cable sheath Polyurethane
Technical Remarks■ The specified protection class is valid only in assembled and tested state.
Electrical interface Max. current Number of wires
Wire cross-section
Cable exit Part No.
[Port 1] [Port 2] [A] [mm²]1
34
BN
BUBK
Socket, M8, 3-pin
open cable ends, 3-pin 4 3 0.24 angled 90°
18344841671834484169
1834484248
Part No. Cable-Ø Cable length L Weight[mm] [m] [kg]
18344841674.5
3 0.0921834484169 5 0.1411834484248 10 0.276
Dimensions
00105612_b
(1) BN=brown (3) BU=blue (4) BK=blackL = length
80 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
M8x1 socket (female), Series CN2▶ Socket, M8x1, 3-pin ▶ straight
00138877
Ambient temperature min./max. -25°C / +80°CProtection class IP 67
Materials:Housing Polyamide
Technical Remarks■ The specified protection class is valid only in assembled and tested state.
Operating voltage
Max. current Contact assign-ment
Cable exit suitable cable-Ø min./max
Part No.
DC AC[V] [V] [A] [mm]
1
34
BN
BUBK
75 60 4 3 straight 180° 3.5 / 5 1834484173
Part No. number of plug options 1 Housing color Weight
[kg]1834484173 1 position Black 0.008
Dimensions38,4
32,4
Ø11
,6
M8x
1
Ø5
Ø9,
7
4
3 1
16405
81Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
M8x1 socket (female), Series CN2▶ Socket, M8x1, 3-pin ▶ angled
16406
Ambient temperature min./max. -25°C / +85°CProtection class IP 65
Materials:Housing Polyamide
Technical Remarks■ The specified protection class is valid only in assembled and tested state.
Operating voltage
Max. current Contact assign-ment
Cable exit suitable cable-Ø min./max
Part No.
DC AC[V] [V] [A] [mm]
1
34
BN
BUBK
75 60 4 3 angled 90° 3.5 / 5 1834484174
Part No. number of plug options 1 Housing color Weight
[kg]1834484174 1 position Black 0.008
Dimensions
M8x
19,
711
,6
12,5
5,0max. 5,0
ca. 28,0
1
4
3
15832
82 Bosch Rexroth AG | Pneumatics
Piston rod cylinders → Guide cylinders
Series GPCAccessories
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2012-10-26, © Bosch Rexroth AG, subject to change
Kit for stroke length adjustment
00129055
DGPC_501
Part No. Ø A4 A5 A6 1) A6 2) A7 1) A7 2) L 3) NoteR402000134 12 13 13 21 29 13 25 12 4)R402000135 16 15 13 24 45 13.5 43.5 30 5)R402000136 20 15 13 26 44 15.5 45.5 30 5)
1) Min.2) Max.3) Adjustment length L = A7 max. - A7 min.4) Shock absorber 0821005002 included in scope of delivery5) Shock absorber 0821005013 included in scope of delivery
Bosch Rexroth AGPneumaticsUlmer Straße 4D - 30880 LaatzenPhone +49 511 2136 - 0Fax +49 511 2136 - 2 [email protected]/pneumatics
The data specifi ed above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judg-ment and verifi cation. It must be remembered that our products are subject to a natural process of wear and aging.
© This document, as well as the data, specifi cations and other informations set forth in it, are the exclusive property of Bosch Rex-roth AG. Without their consent it may not be reproduced or given to third parties.
Subject to modifi cations.
Online-PDF
Your contact:CanadaBosch Rexroth Canada Corp.3426 Mainway DriveBurlington, Ontario L7M 1A8Tel. +1 905 335-5511Fax +1 905 335-4184
AustraliaBosch Rexroth Pty. Ltd.3 Valediction RoadKings Park NSW 2148SydneyTel. +61 2 9831-7788Fax +61 2 9831-5553
U.S.A.Bosch Rexroth Corp.1953 Mercer RoadLexington, KY 40511-1021KentuckyTel. +1 859 254-8031Fax +1 859 254-4188
Great BritainBosch Rexroth Ltd.Broadway LaneSouth CerneyCirencester, GL7 5UHGloucestershireTel. +44 1285 86-3000Fax +44 1285 86-3003
further contacts:www.boschrexroth.com/addresses
26-10-2012