User Guide

Broadband Extender 500 KitFollow the steps in this guide to set up your kit.

If you need some help, see the Frequently Asked Questions at bt.com/producthelp or call 0808 100 6116*.* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.

1 Plug one extender near your router

2 Plug one extender near your device

3 Connect your device

Check box content:

Broadband Extender

Data

Ethernet

Power

Broadband Extender

Data

Ethernet

Power

2 x Broadband Extender 500 2 x Ethernet cables

Find out more• If you need more detailed instructions, Frequently Asked Questions are available at bt.com/producthelp

• If you cannot find the answer to your problem in the Frequently Asked Questions, then please call our free Helpline on 0808 100 6116*. Our dedicated advisors are more likely to be able to help you than the retailer where you made your purchase.

1 Plug one extender near your router

1 Plug one end of the ethernet cable into a spare ethernet socket on your router/hub.

2 Plug the other end into either of the extenders.

IMPORTANT: to work properly, extenders must be plugged directly into the wall socket and not into extension leads.

3 Plug the extender directly into a wall power socket. Make sure the socket’s switched on.

1

2

3

2 Plug one extender near your device

1 Plug the other extender directly into a wall power socket near the device you want to connect. Make sure the socket’s switched on.

2 Wait for connection to complete. Give it a couple of minutes. If everything’s okay, the Power and Data indicators on both extenders will light up.

See Connection help overleaf if the Data indicator doesn’t light up on the extenders.

È1 2

3 Connect your deviceIf the connection is successful, connect your device to the broadband extender using the ethernet cable provided.

After 1 minute of inactivity on the ethernet port, the extender will go into power save mode. The Power indicator will be flashing.

Light status

Light Status What’s happening

Power On Extender running normally

Flashing Extender resetting, synchronising or power save mode

Off Extender turned off

Ethernet On Device connected to extender

Flashing Data being sent or received

Off No device connected to extender or device switched off

Data On Extender connected to network

Green: High transfer speed

Orange: Medium transfer speed

Red: Low transfer speed

Off No connection to network

Broadband Extender

Data

Ethernet

Power

Link buttonWhat do you want to do? Press and hold button

Prepare to join a new network 5 to 8 seconds

Join a new network 1 second

Reset to factory settings More than 15 seconds until Data and Power lights go out

TIP: you may find it helpful to use a watch or a clock when using the Link button.

How to add more Powerline extenders to your existing networkYou can expand your home network by adding more extenders to your existing kit.

1 Plug your additional broadband extender directly into a wall power socket. Make sure the socket’s switched on.

2 Press the Link button on that extender for 5 to 8 seconds. Wait for the Power light to go back to steady green.

3 Press the Link button again, this time for 1 second.

4 Within 2 minutes, press the Link button on one of the broadband extenders already in your home for 1 second to complete the connection to the network.

5 Wait for connection to complete. If everything’s okay, the Power and Data indicators on the extender will light up.

TIP: you might find it easier to plug your new broadband extender in the same double power socket or near one of your existing ones whilst you set things up.

Reset to factory settingsIf your broadband extenders stop working or become unpaired, you can reset both extenders to their factory settings:

1 Make sure the broadband extender is plugged in and the power socket’s switched on.

2 Press the Link button for more than 15 seconds until the Data and Power lights go out. If everything’s okay, the Power indicator on the extenders will light up.

For detailed instructions and technical information for setting up the extenders, please see the Frequently Asked Questions at bt.com/producthelp

È È

Connection helpIMPORTANT: to work properly, extenders must be plugged directly into the wall socket and not into extension leads.

Broadband Extender

Data

Etherenet

Power

Broadband Extender

Data

Etherenet

Power

• If you are having problems synchronising one or more extenders, try resetting them to their default factory settings. Most extenders have a Reset (Link) button that does this. Refer to the extender user guide for more detailed information on how to add more powerline devices.

• Swap devices to help check and isolate a problem with a particular broadband extender unit.

• To check if your home’s electrical wiring is affecting your broadband extenders, try plugging in extenders in the same room. Some old wiring or fuse boxes might affect your network performance.

• House appliances that draw large amounts of power, like refrigerators, freezers, microwaves and air conditioning systems, might cause interference with your network.

• For best network performance, use broadband extenders from BT.

• If there are no spare ports on your router/hub, you can unplug one of your existing devices and use an alternative like wi-fi or purchase a switch.

If you need more help, go to bt.com/producthelp

or call 0808 100 6116*.

General informationFor information on safety instructions, technical information or setting up the extender, please see the Frequently Asked Questions at bt.com/producthelp

GuaranteeYour Broadband Extender 500 Kit is guaranteed for a period of 3 years from the date of purchase. Subject to the terms listed below, the guarantee will provide for the repair of, or at BT’s or its agent’s discretion, the option to replace the Broadband Extender 500 Kit or any component thereof which is identified as faulty or below standard, or as a result of inferior workmanship or materials. Products over 28 days old from the date of purchase may be replaced with a refurbished or repaired product.

The conditions of this guarantee are:

• the guarantee shall only apply to defects that occur within the 3 year guarantee period

• proof of purchase is required

• the equipment is returned to BT or its agent as instructed.

This guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents.

This guarantee does not affect your statutory rights.

To find out what to do if your extender is in or outside of the 3 year guarantee, please see the Frequently Asked Questions at bt.com/producthelp

How to recycle your equipment

The symbol shown here and on the product means that the product is classed as electrical or electronic equipment, so DO NOT put it in your normal rubbish bin.

It’s all part of the Waste Electrical and Electronic Equipment (WEEE) Directive to recycle products in the best way – to be kinder to the planet, get rid of dangerous things more safely and bury less rubbish in the ground.

You should contact your retailer or supplier for advice on how to dispose of this product in an environmentally friendly way.

Declaration of ConformityFor a copy of the Declaration of Conformity please refer to bt.com/producthelp

Offices worldwide

The services described in this publication are subject to availability and may be modified from time to time. Services and equipment are supplied subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of a contract.

© British Telecommunications plc 2013.Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000.

Designed and produced by The Art & Design Partnership Ltd.

Printed in China / Issue 3 / ADP09-1398%

For a Better FutureWe’re always looking to make our products last longer and use less power, so we don’t have such a big impact on the environment.

To find out about what we are doing, visit bt.com/betterfuture