Bro 9700107 Side Entry Rev00
-
Upload
rodrigo-pereira -
Category
Documents
-
view
212 -
download
0
description
Transcript of Bro 9700107 Side Entry Rev00
-
ww
w.
uc
ls
af
et
ys
ys
te
ms
.c
om
Copyright 2006 Unique Concepts Limited All Rights Reserved Patent PendingPart # 9700107 Rev. 00 Printed in USA
Information / Images subject to change without notice
-
For more information on the Side Entry
System please contact the distributor or
manufacturer listed below.
Price Part # Description
14803 Arm Assembly for the Side Entry System Weight: 44 lbs (19.9 Kg)
14796 Support Post (38 to 53 1/2) Weight: 35 lbs (15.8 Kg)
10100 15 Mast Extension (shown) Weight: 16 lbs ( 7.2 Kg)
10101 24 Mast Extension Weight: 19 lbs ( 8.6 Kg)
10102 36 Mast Extension Weight: 23 lbs ( 10.4 Kg)
10103 48 Mast Extension Weight: 27 lbs ( 12.2 Kg)
N/A Fixed Base*
N/A UCL Advanced Digital Winch Sold separately.
1
1
2
5
5
2
3
4
3
Floor Mount Center Mount Wall Mount Fresh Concrete ExistingConcrete
Deck Mount Core Mount
4
*Please refer to the UCL Hoist, Davits, Bases & Accessories catalogue for more information
or call for details. Custom fixed bases and mast extensions are available to meet unique
requirements.
The UCL model 14796 Side Entry Support Post isdesigned to allow the use of most UCL Safety Systemsfixed bases as permanently installed mounts for theSide Entry System. The post also allows you tocombine a variety of UCL lower mast extensions toaccommodate varying heights. *Some restrictionsmay apply. Call UCL for more information.
14796
Please refer to the UCL Winches, Brackets & SRLs catalogue for more info.
Side Entry System Permanent Mount Application Features
Unit 1 - 1500 King Edward Street Winnipeg, Manitoba, Canada R3H 0R5Phone: 204-694-7432Toll Free: 1-800-455-9673Fax: 204-694-7612E-mail: [email protected] visit www.uclsafetysystems.com
Manufactured by:Unique Concepts Ltd.
USA: 1-800-328-6146Canada: 1-800-387-7484Asia: +852 2992 0381Northern Europe: +44 (0) 1928 57 1324Europe, Middle East, Africa:
+33 (0) 497 10 00 10Australia, New Zealand: 1800 245 002Or visit www.capitalsafety.com
You are reading the brochure
highlited below:
Look for these additional UCL Accessory
brochures marked * to accompany this
catalogue:
* Hoists, Davits, Bases & Accessories - #9700101
Vehicle Hitch Mount Sleeve - #9700102
Counterweight Systems - #9700103
* Winches & Brackets - #9700104
Tripods & Accessories - #9700105
Pole Hoist - #9700106
Side Entry/Tank Pod Systems - #9700107
Portable Fall Arrest Systems - #9700108
Engineered Systems - #9700109
Portable Tanker Access Ladder Sys. - #9700110
Basic Hoists - #9700111
Fold Up Hoist - #9700112
Glide 360 Rail System - #9700113
UCL Product Summary - #9700114
-
External Adjustable Tank Collar: This collar is designed to attachvarious UCL Safety Systems accessories to the flanges of manways.Made of powder-coated, lightweight aluminum, the External Tank Collarassembles and installs quickly with minimal tools. The External TankCollar may be used as a mounting base for a variety of accessoriesincluding fixed and adjustable sleeves for UCL Safety Systems davitarms and the UCL Side Entry System.
Price Part # Description11231 External Adjustable Tank Collar
Total Weight: 52 lbs (23.5 Kg)
The UCL Side Entry System is designed forconfined space entry/retrieval and rescueoperations involving horizontal entries with verticalpositioning or retrieval required inside the space.The Side Entry System may be used with themodel 11231 External Adjustable Tank Collar
for adaptation to different manways. It may also beused with a permanently mounted base andextension post. The Side Entry System featuresflexible setup options and a fully articulating boomsystem. It is fully adaptable to an infinite number ofmanway designs and surrounding configurations.
11231
Winch Mount Brackets: The Large & Small Winch Mount Brackets are used in combination with differentwinch/SRL mount brackets to mount different combinations of UCL winches and non-UCL winches/SRLs. Call UCLand speak to a technical sales representative for assistance.
Price Part # Description14909 Large Winch Mount Bracket Weight: 2 lbs (.91 Kg)11832 Small Winch Mount Bracket Weight: 2 lbs (.91 Kg)
*Please refer to the UCL Winches, Brackets & SRLs catalogue (Pt: 19398) for more information about
winches & optional brackets that can be used to outfit this unit.
14909
Price Part # Description11233 Side Entry System Package for use with external adjustable tank collar or permanently mounted bases, as shown above (Digital Winch sold separately).
Total Weight: 69 lbs (31.3 Kg)11233
Side Entry System Portable Mount Application Features
-
Tank Pod System: The UCL Tank Pod System is designed to mount to tankmanways with existing hardware for securing hatch covers. The Tank Podmounts to manway flanges on bolt circle diameters from 19" to 36", with studsfrom 1/2"NC to 3/4"NC. Three independently adjustable legs accommodateflange inclinations to a maximum of 45 degrees. The unit can be set up in anoverhead clearance of only 25". Lightweight anodized aluminum constructionwith plastic inserts at all bearing points reduce the possibility of vesselcontamination and simplify equipment cleaning. Zinc-plated steel hardwareresists corrosion. The Tank Pod can be fitted with a variety of UCL winches,ladder systems, and fall-arrest devices to meet any application requirement.Please refer to the UCL Winches, Brackets & SRLs catalogue (Pt:
19398) for more information about winches and bracket options needed
to outfit this unit.
Price Part # Description13700 UCL Tank Pod System (Digital Winch not included)13734 Carrying Bag for UCL Tank Pod
Weight: 38 lbs (17.2 Kg)
*Shown with UCL Digital
Winch and Winch Mounting
Bracket, sold separately.
UCL Tank Pod Equipment Cart: The UCL Tank Pod Equipment Cart is ideal for transporting your UCL Tank Pod toand from the work site with ease. The cart features a powder-coated finish and can accommodate winches, mastextensions and standard sized toolboxes.
Price Part # Description15982 Wheel Cart for UCL Tank Pod
Weight: 25 lbs (11.3 Kg)
15982
13700
Mast Extension for UCL Tank Pod: This mast extension is designed to install on top of the tank pod to increase theoverall lifting height and anchor point approximately 24. Custom mast extensions are available. Call for details.
Price Part # Description16012 24 Mast Extension for the UCL Tank Pod
Weight: 10 lbs (4.5 Kg)
Stainless Steel Multiple Angle 3/4 Weld-On Studs: The Weld-on stud adapters are manufactured out of 304stainless steel. These studs are designed to be welded onto stainless steel tanks to offer a point of attachment for thetankpod where existing studs and hardware do not exist.
Price Part # Description15981 Stainless Steel Multiple Angle 3/4 Weld-On Studs (set of 3)
Weight: 8 lbs (3.6 Kg)
15981
Mounting Stud Extension Adapters: The UCL stud extension adapters are designed to allow the tank pod to adaptto existing hardware on a tank. The female end of the adapter secures to different diameter studs ranging from 1/2 to3/4. The male end of the adapter secures to the bottom end of the tank pod foot pads. Price Part # Description
15299 1/2 NC - 5/8 NC Mounting Stud Extension Adapter (set of 3) Weight: 1.5 lbs (.68 Kg)
15300 5/8 NC - 5/8 NC Mounting Stud Extension Adapter (set of 3)Weight: 1.5 lbs (.68 Kg)
15301 3/4 NC - 5/8 NC Mounting Stud Extension Adapter (set of 3) Weight: 1.5 lbs (.68 Kg)
16012
15299
24(610 mm)
Tank Pod System Features & Specifications
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /Unknown
/Description >>> setdistillerparams> setpagedevice