Brightness is in the eye of the beholder · 2018-07-02 · Brightness is in the eye of the beholder...

2 inter-lux.com/whitegoods

Whitegoods has developed another

range of minimal lighting tools,

which utilize the form factor of LED

to reduce even further their visual

impact, and of course they all hold

true to our constant principles.

Our Philosophy

- Reduction of detail.

- Seamless architectural integration.

- Logical, modular systems and families of products.

- Ease of specification, installation and maintenance.

Our perception of the ‘brightness’

of a space is primarily based on

what we see at a glance as we scan

around us. In architecture, this

is often walls and other vertical

surfaces. Therefore, how well

the walls are illuminated at

approximately eye level, is the key

factor in our determination of how

well a space is lit.

Within such a space then, which

surfaces or planes should be

revealed in order to support the

architectural concept?

What opportunities are there to

bring light to these surfaces?

Where should the light come from?

What should the properties of that

light be (how much, how focused,

what spread of light, and at what

angle should it fall onto the

surface…)?

Whitegoods provides tools for the

designer to address these questions

and answer them with light, while

the luminaires make the absolute

minimum visual impact on the space.

Brightness is in the eye of the beholder

Whitegoods fixtures provide all-around vertical illumination with high angle secondary diffuse light, filling the volume of the space with light, creating visual brightness and comfort.

click

push

click

6 inter-lux.com/whitegoods 7inter-lux.com/whitegoods

The required hole is prepared in the mounting surface. The area above and around is checked for obstructions. The electrical supply is connected with the connector (in most cases supplied with the luminaire). Any power supply is normally installed at this stage, although it can be done later (all components supplied by Whitegoods will fit through the mounting frame). The frame can then be maneuvered up into position.

The frame can then be integrated into the ceiling with the ‘tape-and-joint’ method, or simply with a traditional plaster finish. Ideally, any excess plaster is cleaned from the inside surface of the mounting frame while still wet. Once dry, the ceiling can be finished. There is no need to paint the inside of the frame as the finish is RAL 9010 white.

The plaster-in frame is mounted to the ceiling with standard drywall screws. The patented plaster trim detail ensures that you will never see cracking around Whitegoods plaster-in fittings.

Although developed to meet asthetic requirements, all Whitegoods lighting tools are designed with ease of use in mind. Almost all of the range conform to a three part system:

1. An installation housing: we call the ‘Mounting Frame’.

2. An electrical/optical cassette: we call the ‘Insert’.

3. A cover, lens, or diffuser: we call this the ‘Glass Frame’ (for the downlights) or the ‘Diffuser’.

1

easy ‘click’ downlight

2 3

Now that all the ‘wet trades’ are finished, and the site is dust free, the second attachment can be carried out in a matter of seconds. Simply connect the in-line plug and maneuver the Insert up into the mounting frame, checking that the cable is not likely to snag on the mounting frame.

The Whitegoods downlight is installed: minimal, practical, functional.

Push the Insert into the mounting frame until a click can be felt or heard. The Insert will then return downward slightly and click again.

We show below an example of the installation process. We have chosen to show the plaster-in downlight because many people assume that it is a difficult process. In fact, it is very simple. Contractors instinctively recognize the simplicity and practicality of this patented system.

4 5 6

push

click

push

click

push

click


gimbal insert finish downlight insert finishChoose between the gimbal or downlight Insert, attach to the wire and push the Insert into the housing.

Wait for the CLICK of the pin latch.

‘Modular Installation Philosophy’Lighting which can evolve with your space. We don’t know what benefits future technologies will offer us. However, with the Whitegoods modular installation philosophy, you can have the flexibility you need now, as well as allowing for the technologies of the future.

The Whitegoods installation Housing (plaster-in or bezel) will accept any of our Inserts. Therefore, the specifier or end user can change their mind and swap the light source whenever they like.

Moreover, a downlight Insert can be swapped for a directional gimbal Insert.

Ideal for a truly multi use, flexible, and future proof space.


Linear Installation PhilosophyHaving the Housing designed for the specificceiling or wall type, allows easy installation on the job site. With the modular gear tray, the electrical components are easily installed as well as removed for maintenance.

Whitegoods: minimal, practical, functional.

gear tray

Installation Maintenance

The Range

Contents

Linear 14 - 17Coves 18 - 21Downlights 22 - 23Directional 24 - 25Gimbals 26 - 27Wall Wash 28 - 29Angled Gimbals 30 - 31Washes 32 - 33Panels 33 - 34


Linear

Plaster-In Bezel

P20LDL B20LDL

20

2.5”

1”

1.4”

0.5”

0.7”

0.8”

0.7”1.2”

0.7”

Surface Mounted

UC20LDL

0.7”

1”

linear

20 linear

LED■ Low Power (3.2W/ft)■ Mid Power (6.4W/ft) Color (Low/Mid Lumens/ft)■ 80+ CRI minimum■ 2700K (316/534 lm/ft)■ 3000K (343/579 lm/ft)■ 3500K (343/579 lm/ft)■ 4000K (355/601 lm/ft)■ 90 CRI available

Accessories■ Opal diffuser (standard)■ Round opal diffuser ■ Satin diffuser

Surface Mounted

SM20LDL

Suspended

S20LDL

Suspended Direct/ Indirect

S20LDI

Plaster-In Plaster-In/Bezel

P20LWW SRP20LWW

Plaster-In

B20LWW

Bezel

SRB20LWW

Plaster-In/Bezel

SRP20LCFWSRB20LCFW

20 linear wash

0.7”

0.7”

0.7”

0.7” 1”

0.7”

22.5°

3.5”

2.1”

1.4”

22.5°

2.5”

1.3”

2”

45°

3.4”

1.2”

0.7”

2.6”

1.2”

0.7”

45°

Diffuser

LED Board

Aluminum Extrusion

Whitegoods 20 Linear

Whitegoods utilizes modularity throughout the range to ensure maximum efficiency of design,

manufacture and production. For the specifier this means absolute

consistency across all product types and applications, as well as making sense economically.

project: Palmgren House, Drevviken, Swedenarchitect: John Pawsonlighting designer: Mindseyephotographer: Gilbert McCarragher


LED■ Low Power (3.2W/ft)■ Mid Power (6.4W/ft)■ High Power (10W/ft)

Color (Low/Mid/High Lumens/ft)■ 80+ CRI minimum■ 2700K (235/437/691 lm/ft)■ 3000K (235/437/691 lm/ft)■ 3500K (245/455/719 lm/ft)■ 4000K (249/464/733 lm/ft)■ 90 CRI available

Accessories■ Opal diffuser (standard)■ Satin diffuser■ 1” Drop opal diffuser■ 1” Drop satin diffuser

LED■ Low Power (3.2W/ft)■ Mid Power (6.4W/ft)■ High Power (10W/ft)


Accessories■ Opal diffuser (standard)■ Satin diffuser

LED■ Low Power (3.2W/ft)■ Mid Power (6.4W/ft)■ High Power (10W/ft)■ 2x Mid Power (12W/ft)

Color (Low/Mid/High/2x MidLumens/ft)■ 80+ CRI minimum■ 2700K (400/743/1174/1486 lm/ft)■ 3000K (400/743/1174/1486 lm/ft)■ 3500K (416/774/1222/1548 lm/ft)■ 4000K (424/789/1246/1578 lm/ft)■ 90 CRI available


3.5”

2.4”

1”

3.5”

2.4”

0.6”

3.5”

2.4”

3.5”

2.4”

4.5”

4”

1” 0.6”

4.5”

4”

4.5”

4”

4.5”

4”

4.9”

5.7”

1”

4.9”

5.7”

0.6”

4.9” 4.9”

5.7”5.7”

Linear

Plaster-In Bezel Surface MountedSuspended Direct/

Indirect

P60LDL B60LDL SM60LDL S60LDL/S60LDI

60

100

150

Plaster-In Bezel Surface Mounted Suspended

P100LDL B100LDL SM100LDL S100LDL

Plaster-In Bezel Surface Mounted Suspended

P150LDL B150LDL SM150LDL S150LDL

project: Laurel Libraryarchitect: Grimm + Parkerphotographer: Michael K. Wilkinson


LED■ Low Power (3.2W/ft)■ Mid Power (6W/ft) ■ High Power (10W/ft)



LED■ Low Power (3.2W/ft)■ Mid Power (6.4W/ft)

Color (Low/Mid Lumens/ft)■ 80+ CRI minimum■ 2700K (316/534 lm/ft)■ 3000K (343/579 lm/ft)■ 3500K (343/579 lm/ft)■ 4000K (355/601 lm/ft)■ 90 CRI available





Coves

1.3”

3.7”

EC

20

Plaster-In Plaster-In

MZC20L MEC20L

1.1”1.9”

3.0”

7.5”

2.2”1.5”

Coves

BOX COVE MINI BOX

5”

1.5”

3.8”

1.2”

Plaster-In

ZC

2.6”

5.8”5.5”

Coves

Coves

5.9”

1.9”1.2”

MEC

Plaster-In Plaster-In Plaster-InPlaster-In

project: 95 Wigmore Street Londonarchitect: Orms Architectslighting designer: Mindseye Lighting


Coves

Coves

Plaster-In

VPC

Bezel

VBC




6.2”6.1”

Plaster-In

EPN

Coves

Plaster-In

EN

2.25”1.5”

5”

2.25”1.5”

5”

1.8”

2”

1.8”

2”

architect: Genslerphotographer: ©Gensler / Ryan Gobuty


Downlights

Plaster-In Square

Plaster-InRound

BezelSquare

BezelRound

P60SDL P60RDL B60SDL B60RDL

5.6” 1”

Ø2.4” Ø2.4”

2.4” 5.6” 0.4” 2.4”

60


Plaster-In Square

Plaster-InRound

BezelSquare

BezelRound

4”1”

Ø4” Ø4”

4”0.6”5.7”

100


Plaster-In Square

Plaster-InRound

BezelSquare

BezelRound

8.5” 8.5”1”

5.9”

Ø5.9” Ø5.9”

0.6”5.9”

150

5.7”

P60SDL/IP P60RDL/IP B60SDL/IP B60RDL/IP

Xicato 80 Series■ 80 CRI■ 1300 lm @ 700mA, 9.5W■ 965 lm @ 500mA, 6.6W

Xicato Artist Series ■ 95 CRI■ 1300 lm @700mA, 13.3W■ 965 lm @500mA, 9.2W

Color■ 2700K, 3000K, 3500K, 4000K

Beam Angles■ 38° accent illumination■ 54° general illumination

Accessories■ Open aperture (standard)■ Regressed clear diffuser■ Flush/Regressed frosted diffuser■ Microprismatic diffuser

Xicato 80 Series ■ 80 CRI■ 2000 lm @ 700mA, 15.2W■ 1490 lm @ 500mA, 10.6W


Color■ 2700K, 3000K, 3500K, 4000K


Accessories■ Frosted diffuser (standard)■ Clear diffuser■ Regressed frosted diffuser■ Microprismatic diffuser

Xicato 80 Series ■ 80 CRI■ 4000 lm @ 1400mA, 34.2W■ 3000 lm @ 1050mA, 25.7W■ 2000 lm @ 700mA, 15.2W

Xicato Artist Series ■ 95 CRI■ 3000 lm @ 1050mA, 30.5W ■ 2000 lm @ 1050mA, 20.0W■ 1300 lm @700mA, 13.3W

Color■ 2700K, 3000K, 3500K, 4000K


Accessories■ Frosted diffuser (standard)■ Clear diffuser■ Regressed frosted diffuser■ Microprismatic diffuser

project: 2300 N 2ndarchitect: TBCphotographer: James Oesch


Directional

Plaster-In Square

Plaster-InRound

BezelSquare

BezelRound

100

P100SRG P100RRG B100SRG B100RRG

Plaster-In Square

Plaster-InRound

BezelSquare

BezelRound

60

1”

Ø2.4”

2.4” 0.4” 2.4”

Ø2.4”

5.6” 5.6”

Ø5.9”

5.9”1”

5.7” 5.7”

Ø5.9”

5.9”0.6”

Xicato 80 Series ■ 80 CRI■ 1300 lm @ 700mA, 9.5W ■ 965 lm @ 500mA, 6.6W

Xicato Artist Series ■ 95 CRI■ 965 lm @500mA, 9.2W

Color■ 2700K, 3000K, 3500K, 4000K

Beam Angles30° adjustable lamp module■ 38° accent illumination■ 54° general illumination

Accessories■ Open aperture (standard)■ Hex louver■ Snoot■ Regressed clear diffuser■ Regressed frosted diffuser■ Microprismatic diffuser



Color■ 2700K, 3000K, 3500K, 4000K


Accessories■ Open aperture (standard)■ Hex louver■ Snoot■ Regressed frosted diffuser

Xicato 80 Series■ 80 CRI■ 1300 lm @ 700mA, 9.5W■ 965 lm @ 500mA, 6.6W


Color■ 2700K, 3000K, 3500K, 4000K


Accessories■ Open aperture (standard)■ Hex louver■ Snoot■ Regressed clear diffuser■ Regressed frosted diffuser■ Microprismatic diffuser

Plaster-In Square

Plaster-InRound

BezelSquare

BezelRound

150

P150SRG P150RRG B150SRG B150RRG

P60SDDL P60RDDL B60SDDL B60RDDL

Ø5.9”

5.9”1”

8.5”

Ø5.9”

5.9”0.6”

8.5”

project: Futures Grouplighting designer: CM Kling + Associatesphotographer: CM Kling + Associates


Xicato 80 Series■ 80 CRI■ 1300 lm @ 700mA, 9.5W ■ 965 lm @ 500mA, 6.6W


Color■ 2700K, 3000K, 3500K, 4000K


Accessories■ Open aperture (standard)■ Hex louver■ Snoot■ Regressed clear diffuser■ Regressed frosted diffuser

*Multiple gimbal avaliable.



Color■ 2700K, 3000K, 3500K, 4000K



*Multiple gimbal avaliable.

*Multiple gimbal available■ LRG2 = 2 lamp■ LRG3 = 3 lamp■ LRG4 = 4 lamp

Gimbals

P100LRG* B100LRG*

100

Plaster-In Square

BezelSquare

150

Plaster-In Square

BezelSquare

200

Plaster-In Square

BezelSquare

P150LRG* B150LRG*

P200LRG B200LRG

Plaster-In Square

BezelSquare

300

P300LRG B300LRG

5.7” 5.7”

Ø4”

1” 0.6”

Ø4”

1” 0.6”

1” 0.6”

Ø5.9”

Ø5.9”

1” 0.6”

8.5”8.5”

LRG2 LRG3 LRG4 LRG2 LRG3 LRG4

100 150

7.9

”1”

4” 9”

0.6”

11.8

”1”

0.6”

15.7

”1”

0.6”

11.8

”1”

0.6”

17.7

”1”

0.6”

23.

6”

1”

0.6”

4” 4” 6” 6” 6”9” 9” 10” 10” 10”

project: Northern Virginia Community Collegearchitect: Grimm + Parkerphotographer: Ken Wyner

28 inter-lux.com/whitegoods 29inter-lux.com/whitegoods

Wall Wash

Plaster-In Square

Plaster-InRound

P60SWW/IP P60RWW/IP

60

1” 2.3”

2.6”

2.6”5”

BezelSquare

BezelRound

B60SWW/IP B60RWW/IP

0.4” 2.3”2.6”5”

2.6”

Xicato 80 Series■ 80 CRI■ 1300 lm @ 700mA, 9.5W ■ 965 lm @ 500mA, 6.6W

Xicato Artist Series■ 95 CRI■ 1300 lm @700mA, 13.3W ■ 965 lm @500mA, 9.2W

Color■ 2700K, 3000K, 3500K, 4000K


Accessories■ Regressed frosted diffuser (standard)■ Regressed clear diffuser■ Regressed microprismatic diffuser

Plaster-In Square

Plaster-InRound

100

P100SWW22 P100RWW22

Plaster-In Square

Plaster-InRound

P100SWW45 P100RWW45

5.9” 4”

5.9”

1”

5.9”

4.4”

1”4”

4.4”

100

B100SWW22 B100RWW22

BezelSquare

BezelRound

5.9”

4.4”

0.4” 4”

4.4”



Color■ 2700K, 3000K, 3500K, 4000K


Accessories■ Frosted diffuser (standard)■ Clear diffuser■ Microprismatic diffuser



Color■ 2700K, 3000K, 3500K, 4000K



5.9”

Plaster-In Square

Plaster-InRound

150

P150SWW45 P150RWW45

8.9”

5.9”1”8.9”

8.9”

Xicato 80 Series ■ 80 CRI■ 4000 lm @ 1400mA, 34.2W■ 3000 lm @ 1050mA, 25.7W■ 2000 lm @ 700mA, 15.2W■ 1490 lm @ 500mA, 10.6W

Xicato Artist Series ■ 95 CRI■ 3000 lm @ 1050mA, 30.5W■ 2000 lm @ 1050mA, 20.0W■ 1300 lm @700mA, 13.3W

Color■ 2700K, 3000K, 3500K, 4000K



project: Brookfieldarchitect: LSMlighting design: Seider


Angled Gimbal

P100SAG22 P100SAG22

Plaster-In Square

Plaster-InRound

5.9”

4.4”

1”4”

4.4”

100

B100SAG22 B100RAG22

BezelSquare

BezelRound

5.9”

4.4”

0.4” 4”

4.4”

Plaster-In Square

Plaster-InRound

100

P100SAG45 P100RAG45

4”

5.9”

1”



Color■ 2700K, 3000K, 3500K, 4000K


Accessories■ Open aperture (standard)■ Hex louver■ Snoot■ Regressed clear diffuser■ Regressed frosted diffuser■ Regressed microprismatic diffuser



Color■ 2700K, 3000K, 3500K, 4000K





Color■ 2700K, 3000K, 3500K, 4000K


Accessories■ Open aperture (standard)■ Hex louver■ Snoot■ Regressed clear diffuser■ Regressed frosted diffuser■ Regressed microprismatic diffuser

5.9”

5.9”

Plaster-In Square

Plaster-InRound

150

P150SWW45 P150RWW45

8.9”

5.9”1”8.9”

8.9”project: Brookfieldarchitect: LSMlighting design: Seider


Washes

Plaster-In Ceiling Wash

Plaster-InFloor Wash

BezelCeiling Wash

BezelFloor Wash

P60SCFW P60SCFW B60SCFW B60SCFW

LED - Citizen ■ Power (3.2W)

Color (Lumens)■ 80 CRI■ 2700K (314lm @ 350mA)■ 3000K (335lm @ 350mA)■ 3500K (346lm @ 350mA)■ 4000K (340lm @ 350mA)

60

100




BezelCeiling Wash

BezelFloor Wash





4.3” 1”

2.4”

2.4”4.3”

2.4” 2.4”

2.4” 0.4”

2.4”

7.2”

3”

4”

4”

1” 0.6”7.2”

3”

4”

4”

150




BezelCeiling Wash

BezelFloor Wash

10.4”

3.5”

5.9”

5.9”

1” 10.4”

3.5”

5.9”

5.9”

0.6”

project: Hamilton Terrracearchitect: BB Partnership


Panels

Plaster-InLarge Area Panel

BezelLarge Area Panel

P300LP B300LP*

7”7”7” 7”

12”

1” 1”

13.6” 25.6”

0.6” 0.6”

Len

gth

Len

gth

Len

gth

300 600

Plaster-InLarge Area Panel

BezelLarge Area Panel

P600LP B600LP*

24”

Len

gth

project: White Cube Galleryarchitect: Mr J Rundell & Associateslighting designer: Mindseye

300 Large Area Panel LED

LED■ Low Power (6W/ft)■ Mid Power (12W/ft)

Color (Low/Mid Lumens/ft)■ 80+ CRI minimum■ 2700K (800/1486 lm/ft)■ 3000K (800/1486 lm/ft)■ 3500K (832/1548 lm/ft)■ 4000K (848/1578 lm/ft)■ 90 CRI available

Standard Length(plaster-in/bezel)■ 24”/25.6”■ 36”/37.6”■ 48”/49.6”■ 56”/57.6”■ 72”/73.6”■ 84”/85.6”■ 96”/97.6”

600 Large Area Panel LED

LED■ Low Power (12W/ft)

Color (Low Lumens/ft)■ 80+ CRI minimum■ 2700K (1200 lm/ft)■ 3000K (1200 lm/ft)■ 3500K (1664 lm/ft)■ 4000K (1696 lm/ft)■ 90 CRI available

Standard Length(plaster-in/bezel)■ 24”/25.6”■ 36”/37.6”■ 48”/49.6”■ 56”/57.6”■ 72”/73.6”■ 84”/85.6”■ 96”/97.6”

*Bezel dimensions vary depending on mounting.

project: St. Johns College High School - Performing Artsarchitect: Perkins Eastmanphotographer: Andrew Rugge Photography


Our Philosophy

- Reduction of detail.

- Seamless architectural integration.

- Logical, modular systems and families of products.

- Ease of specification, installation and maintenance.

Whitegoods is a language of light

developed to bring illumination

to surfaces in the simplest way

possible. We believe in ‘luminous

surfaces and planes of light’.

Utilizing modularity throughout

the range ensures maximum

efficiency of design, manufacture

and production. For the specifier this

means absolute consistency across

all product types and applications, as

well as making sense economically.

Lighting is about creating an

environment that uses light as

the main medium of expression.

It means having one’s work blend

seamlessly with the architecture,

often at the risk of not being

seen. It’s about giving definition

to a space.

tools for lighting inter-lux.com/whitegoods

Brightness is in the eye of the beholder · 2018-07-02 · Brightness is in the eye of the beholder...

Documents

Transcript of Brightness is in the eye of the beholder · 2018-07-02 · Brightness is in the eye of the beholder...