BREATHPURE Medical Ozone Generators

Widest range of reliable Ozone / Oxygen Therapy equipment

Steady Flow Rich in Concentration

Perfect Calibration Stabilisation of produced ozone

Ability to adjust ozone output Continuous R & D backed by reputed practitioners Complete knowledge on applications provided thro’ web based discussion group for Doctors Largest exporters from India

Products from an ISO 9001 – 2008 certified company

QM022

Model: NISA P 0703 With / without timer Adjustible ozone output Dual feed: Oxygen / Air Oxygen inlet @ 1 to 2 LPM Range: 5 to 95 Gamma Application: Aerial disinfection / de odourisation

Model: 0019 GW P Protected by inbuilt power supply board Timer protected (optional, with by-pass arrangement) Dual feed: Medical oxygen / Dry air Medical oxygen feed: 2 LPM Analog dial ranging 0 to 100 micrograms / ml Touchpad switch board LED indications of every procedure Long blue vertical frontal LED confirming performance Versatile ozone collection port behind frontal door

Model: 0023 GW P Centrally microprocessor controlled Real time digital display of ozone output Large clear LCD panel on front Ozone output adjustable from 7 to 98 Gamma Touchpad frontal panel, User friendly software Intrinsically protected from electrical shock Only medical oxygen fed, zero oxygen loss Oxygen taken up by system as required Inbuilt destroyer for unused ozone

Model: 0014 IND L Industrial model, essentially dry air fed Self cooled design, no chilling systems required Capacity: Up to 100 Grams per hour at 8 CFM feed Tested for 2 Kg / sq. cm. pressure

Others; made to specifications

Front Panel – Model: NISA P 0703

Front Panel – Model: 0023 GW P

Model Dimension Weight Power Consumption NISA P 0703 450 x 250 x 205 mm 12 Kgs 7 W

0019 GW P 460 x 260 x 205 mm 10 Kgs 10 W 0023 GW P 300 x 260 x 150 mm 8 Kgs 14 W 0014 IND L 450 x 600 x 750 mm 25 Kg + 60 W +

SIMPLE OPERATION INSTRUCTIONS For Breathpure Medical Ozone Generators – Model No. 0019 GW P.

A. The front Panel: LEGEND: RESET FIXED TIMER ON MODE (GREEN) TIMER OFF MODE (YELLOW)

B. The back panel

1. Place the power chord in plug point, switch it on. 2. Press Power switch at the back, the machine should automatically start producing ozone. 3. If not, press air pump on. Ozone should come out. But air pump is used for demonstration

purpose and for Dentists’ applications only (also for treatment of external ulcers). 4. During actual operation, open PVC pipe from inlet, push the outlet pipe from an oxygen cylinder

in machine inlet, switch off air pump. Keep Oxygen flow at 2 liters per minute. 5. Look at the LED lights on the front panel. If machine starts with yellow light on, press RESET

bar softly. Green LED will be on and ozone will come out from outlet. 6. Timer is adjusted to periodically switch on and off the system and thus to provide opportunity

to cool down the active parts. For Pain Management and Beauticians’ applications, the timer on and off regulators on the front (behind the door), have been kept at 1 – 1 positions. There is no requirement to adjust them at all.

7. If for any reason, the timer is not required, just push the By Pass switch at back. 8. The big dial on the front is for you to adjust. According to your preference of output in mg/l. 9. For any minor electrical fault, change the fuse provided. System will again work perfectly.

10. Take ozone from outlet pipe into disposable syringe without needle or dip outlet pipe in water up to about three inches or more. Similarly ozone can be mixed in blood or olive oil.

DOOR

MAIN DIAL

TIMER ON REGULATOR

TIMER OFF REGULATOR

0 0

0

o 0 0

O O O

NAME PLATE

POWER FUSE BY PASS

AIR PUMP

INLET AIR OUTLET

FAN

0 0

Broad Technical Specifications Product: Breathpure Medical Ozone Generators Model No.: 0019 GW P Used in: Food Processing, Health Care, Hospitality – Others Manufactured by: TEAM WATERHOUSE, Kolkata in technical collaboration with Canadian Research Foundation, Quebec, Canada Purpose: Continuous generation of ozone with nominal electricity input Principle: Dry electrolysis of oxygen in controlled situations Calibration: By Ultra violet absorption method (Beer Lamberts’ Law) Certification: Certified by OASIS* ( la sociedad internacional para la investigación sobre la aplicación de ozono, Bircham, Madrid, Espana ) Feed: Dual, Inbuilt air or External oxygen Physical Details: Dimensions: 400 mm x 205 mm x 460 mm Height Power Consumption: 11 VA, 220 Volts, 50 Hz per 1000 mg/hr. Ozone Production: 1,000 mg / hr., 5 to 120 microgram per ml. Memory retention: No specific limit Input flow: 2 LPM (3 LPM Max) at 2 BAR Maximum Pressure Drop: Nominal Input Gas: Medical Oxygen Preferable Connections: Matched with O2 Cylinder & Syringe Output: With Medical O2 as feed – 15 to 31 GPH Operating Pressure: 3 Kg/Sq.Cm & 0.5 Kg/Sq.Cm respectively Display: Analog. Advanced digital models are available Ozone Sensing / Calibration: By inbuilt micro processor Room Size that can be treated: 1,000 Cft approximately Ozone flow: 10.58 CFH at 1 - 50oC and 80% Humidity Max Safety: Electrically intrinsically safe, Ozone is

thrown after proper dilution. Environmental Issue: No harmful byproduct. Special Instructions: Keep away from water, high frequency radiation,

Transformers. Models available up to 50,000 mg/hr in this range.

Restriction: Not to be used with lid open. Technology from Canada – Tested as per OSHA, USA standard Discussion Board for Doctors / Engineers (Highly recommended for intellectual exchanges): http://groups.google.com/group/unconventional-medicine/topics Related models available: ENCLOSE 100 NISA P 07 0014 GW IND L ( up to 100 gph )

Ozone Applications http://groups.google.com/group/unconventional-

medicine/topics www.OzonePedia.com

Medicine Pain Management Rectal / Vaginal / Ear Insufflation Diabetic Gangrene Dentistry Sterilisation Autohaemotherapy Minor & Major Prevention from SARS, MRSA, Cross Infection Deodourisation of Mortuaries Chelation Therapy OT / ICU / ICCU / NICU Fumigation

Textile Bleaching

Rubber Rheometer Rubber Cracking

Pharmaceutical Disinfecting Hand Wash Removal of Endotoxins for WFI Manufacturers

Laundry Low Chemical, Low Energy Washing

Plastic Corona Treatment

Food Processing Disinfection Deodourisation Removal of Pesticides

Cooling Towers Removal of Algae etc. at Less Chemicals.

Paper Corona Treatment Bleaching

Bakeries Disinfecting Hand Wash Air Sterilisation before Packaging

Swimming Pools Oxidation Disinfection at low chemicals

Hotels / Food Marts Deodourisation at Slaughterhouse Removal of Pesticides Absorption of Smoke and Mixed Odour

Domestic Use Ozone Mouth Wash Ozonated Water for Drinking (Detoxification) Negative Ion Generator for anti-ageing

Water /Waste Water Handling Oxidation Disinfection Pesticides Removal

Beauty Salons Skin Treatment Scalp Treatment Hyperbaric Chambers Ozone Spa Ozonated Oil as Lotion

The unbelievable span of Ozone Applications

Water Treatment for oxidation and disinfection Waste Water treatment for oxidation, deodourisation Hospitality sector for deodourisation and smoke control Health Care sector for sterilisation, alternative therapy

Beauty Salons for skin and hair treatment Specialised Skin Care Salons

Cooling Tower treatment Swimming Pool sanitization

Public Mortuaries for deodourisation Hospitals for prevention of cross infections & SARS

Detoxification by Chelation Dental Care for caries and oral ulcers Diabetic Gangrene, Burn, Bed Sores

Regular domestic use and selected therapies Leather Industries for deodourisation & oxidation Disinfecting Hand Wash for Pharmaceutical sector

Textile industries for bleaching Paper Industries for bleaching and disinfection

Public and Hospital Laundries for disinfection & whitening Public Utilities for deodourisation Rubber industries for cracking

Food processing for removal of pesticides & disinfection Soil Remediation

Bio Chemistry & Micro Biology Laboratories Electronic Component industries

Exclusively manufactured and marketed in India by: TEAM WATERHOUSE, 41, G. L. Ray Road, S. M. Nagar, PO. Sarkarpool, Kolkata – 700 143, West Bengal. Alternate: G.P.O Box 584, Kolkata – 700 001, India. Contacts: Phone: 0091 33 2401 9315, Fax: 0091 33 2465 3517, e-Mail: venture_asia@hotmail.com Website: http://www.OzonePedia.com Sponsored web based Ozone Forum: http://groups.google.co.in/group/unconventional-medicine/topics Knowledge Partner of OASIS (Spain) in India.

ISO 9001:2008