Breathe new life into your bathroom…

Freecall 1800 644 171

…without the hassle and expense of replacing!

Head Office Australia 3 Harrow Street Preston Victoria 3072

Freecall 1800 644 171Facsimile: 1300 765 266

Email: info@bathroomwerx.com

Website: www.bathroomwerx.com

What Sets Us ApartNational Franchise 2

We Manufacture Our Own Materials 2

Research and Development 2

Registered Training Organisation 2

Customer Service 2

7 Year Guarantee 2

Services & ProductsBathtub & Basin Re-enamelling 4

Leaking Shower Bases 4

Shower Base Re-enamelling 4

Wall Tile Re-enamelling 5

Werx Anti-Slip Treatment 5

Chips, Scratches, Stains, Cracks – Repair & Polishing Service 6

Anti-Slip Grids 6

Bath Seal 7

Quick Fit Wastes and Pop-up Plug & Waste Inserts 7

Bathroom Werx Makeover Service 7

Bathtub & Tile Cleaner 8

Cast Iron Bathtubs on Feet 8

The Werx EnamelFeatures 10

Our Customers 10

Before and After Bathroom Services… 10

Servicing YouServicing your area 12

Here’s what our customers say 12

With over 20 years experience 12

What setsus apart…

No re-plumbing,

no re-tiling,

no mess.

1

National FranchiseBathroom Werx is a National Franchise System specialising in on-site re-enamelling of baths, basins, showers and all sanitary ware fixtures and fittings.

Bathroom Werx has Franchisees located throughout Australia and is nearly three times older than its 7 year Guarantee.

We are never more than a phone call away. Your call is answered by trained operators in our National Call Centre who can help you with your query immediately.

Every Franchise Owner is fully trained in the Bathroom Werx system that ensures they adhere to the quality standards set by the Franchisor.

With over twenty years of experience and thousands of satisfied customers Bathroom Werx can breathe new life into your bathroom without the hassle and expense of replacing!

We Manufacture Our Own MaterialsWe manufacture the unique WERX ENAMEL which has been specifically formulated for re-enamelling baths, basins, showers, tiles and all sanitary ware fixtures and fittings.

This ensures your get an exceptional quality finish and durability on all your bathroom surfaces backed by our 7 Year WRITTEN Guarantee.

Our WERX ENAMEL also has an anti-slip factor. This means that when applied to bathtubs or shower bases the surface will be a lot less slippery when wet, compared to the surfaces of brand new sanitary ware.

The Werx Enamel is also incredibly easy to clean and maintain as well as being mould and mildew resistant.

Our on-site restoration and reconditioning technology means that your bathroom can be re-enamelled in as little as one day and ready to use again in 24 hours!

Baked Enamel TechnologyThe Werx Enamel can be baked on to most bathroom surfaces using our unique Bathroom Werx Baking system. This gives you the option of using your bathroom again the minute we finish.

Research and DevelopmentBathroom Werx has a continuous research and development programme where every noteworthy development in the industry is evaluated, tested and incorporated into our products and services.

Registered Training OrganisationAs a Registered Training Organisation with the Office of Employment, Training and Tertiary Education, our Technicians undergo a training course that is nationally recognised and earns them a trade equivalent qualification in Bathroom Werx Surface Coatings.

This means that our Technicians are highly trained so that you get the best results for your bathroom!

Customer ServiceOur Customer Service Team Members have many years of experience in helping people with their bathroom renovations.

Your will find our Team Members are helpful, courteous and have good product knowledge to provide you with the right solution for your bathroom.

Our Technicians will arrive on time, are professional in their work and will leave your bathroom in a clean state!

7 Year GuaranteeRelax knowing that we guarantee your newly restored and re-enamelled Bathroom fixtures and fittings in writing for 7 Years.

Your guarantee covers labour and materials and is designed to give you peace of mind. With over 20 years experience our products and services have withstood the test of time and so will your bathroom!

Guarantee CertificateTax Invoice No:

Expiry Date:

Customer Name:

Location:

Certificate No:

This Guarantee is given by the Bathroom Werx Franchisee, an independently owned and operated business

conducted under Franchise. The re-enamelling work detailed in the Tax Invoice document above is guaranteed

by the Bathroom Werx Franchise for the period stated above subject to the provisions overleaf.The Bathroom Werx Franchisee is:Bathroom Werx Australia ABN 29 007 195 557Head Office Australia: 3 Harrow Street, Preston VIC 3072

Freecall: 1800 644 171Email: info@bathroomwerx.com Website: www.bathroomwerx.com

2

Services & Products…

Bathroom Werx

technology means that

your bath, basin or

shower can be

re-enamelled on the spot

in just 6 hours – ready to

use again in just

24 hours!

3

Before Re-enamelling

After Re-enamelling

Bathtub & Basin Re-enamellingIf the surface of your bathtub or basin is rough, worn, chipped – or if you simply just don’t like the colour – our re-enamelling service will restore the surface to look like NEW again without the hassles and expense of replacing.

When we re-enamel your bathtub or basin we:

• Removealltherust

• Repairallchips

• Repairanyotherdamageorsurfaceimperfections

• Preparethesurfaceusingourownexclusivematerials

• Apply the WERX ENAMEL to the bathtub and basin using theunique Bathroom Werx Re-enamelling system in the colour of your choice.

Bathroom Werx technology means that your bath and basin can be re-enamelled on the spot in just 6 hours with no expensive re-tiling or re-plumbing and no mess!

And you can relax knowing that Bathroom Werx guarantees their work for 7 Years in writing!

Shower Base Re-enamelling

In just 6 hours, Bathroom Werx can transform your old worn, chipped and stained shower base to a sparkling “NEW” shower base in any decorator colour you like.

Using our unique re-enamelling process, the chips and scratches are filled leaving you with a sparkling, easy to clean “new” shower base.

We can also fill tiled and concrete shower bases to create a smooth surface which is then re-enamelled. This is an ideal way to transform tiled and concrete shower bases to a smooth and glossy modern looking shower base.

The Bathroom Werx shower base treatment includes the following work:

• Repairallchipsandcracksinthesurfaceoftheshowerbase.

• Removeloosegroutanddiscolouredgrout,andregroutwherenecessary.

• Mechanicalandchemicalsurfacepreparation.

• Ifyouchoosewecanapplyourwaterprooffillerstoconcreteortiledshower bases so that the end result is a smooth glossy finish.

• ApplytheWerxEnamelcoatingtothebaseinanycolourthatyoulike.

Your shower base will simply look brand new again! And because of the anti-slip factor in the Werx Enamel you will find it a lot less slippery than the traditional tiled surface when wet.

Leaking Shower BasesIf you have a leaking concrete or tiled shower base, then Bathroom Werx has a unique solution for you that can save you time and money!

By applying our waterproof fillers to the shower base, you will end up with a smooth, glossy finish that is now completely sealed and water tight. And our anti-slip factor in the WERX ENAMEL makes it safer for you to use.

Just imagine a NEW shower base in one day without the hassles and expense of ripping out the tiles, the old base and then the cost of waterproofing your whole shower enclosure before you can install a new base and then re-tile and re-grout!

Before Re-enamelling

After Re-enamelling 4

Before Re-enamelling

After Re-enamelling

Werx Anti-Slip Treatment Bathrooms are often the place where accidents happen in the house. Water from your shower, bath or basin splashes onto the floor, and your family can easily slip and seriously hurt themselves.

The Werx Anti-Slip Treatment is a safe solution to dangerous, slippery bathroom surfaces.

This specially formulated treatment gives up to an 800% increase in the co-efficient of grip on wet surfaces reducing the likelihood of accidents.

With the Werx Anti-Slip Treatment for tiles, you can feel safe stepping out of the shower or bath to walk across your floor tiles and your family can feel safer moving about your bathroom.

Up to 800% increase in the co-efficient of grip when wet. …and totally Invisible!

Wall Tile Re-enamellingThe traditional way of changing wall tiles means you could spend thousands of dollars plus endure the inconvenience of not being able to use your bathroom for several days, even weeks!

Bathroom Werx offers a cost-effective alternative for changing the colour scheme of the existing wall tiles in your bathroom.

By applying the WERX ENAMEL coating over the existing tiles, Bathroom Werx can simply change the colour of the wall tiles to any decorator colour that you like!

There is no expensive removal or mess and you can choose a colour to match the other fittings in your bathroom if you like.

When we re-enamel your Wall Tiles, we

•Remove any mould or mildew build up in the grout and tiles

•Repairallchipsandcracksinthetiles

•Removeallsilicon

•Regroutwherenecessary

•Chemicallypreparethesurfaceforthenewenamel

•ApplytheWERXENAMELcoatingtothewalltiles.

Get rid of that un-shiftable mould or mildew once and for all because the WERX ENAMEL surface won’t let mould grow back.

Your Tiles will be easy to clean with a quick wipe over so that they always look new. And just imagine no more harsh scrubbing and cleaning! And Tiles that look brand new again!

Safety in your bathroom

Before Re-enamelling

After Re-enamelling

5

Anti-Slip GridsBathroom Werx offers the option of applying slip-resistant grids to the surface when re-enamelling your bathtub or shower base.

This grid style procedure applies a permanent safety impression which is included in your bathtub or shower base’s surface when re-enamelling.

This is a major safety innovation and is the ideal replacement to those unsightly bath mats that quickly become unhygienic, dirty and discoloured.

Include the Anti-Slip Grids when re-enamelling your bath or shower base and increase the overall total safety aspect of your entire bathroom.

Chips, Scratches, Stains, Cracks – Repair & Polishing ServiceThis service is ideal for bathtubs, basins and shower bases which look unsightly due to minor surface damage and is an economical solution for making them look presentable again.

With this service we offer you the following:

• Wewillremoveanyrustfromaroundthedamagedarea.

• If there is rust coming through the vitreous enamel, thevitreous enamel will be chipped out first, the rust removed and killed, and then the area will be filled in again using our exclusive bathtub fillers.

• Wewillthencolourmatchtherepairtotheexistingcolourso that once we have finished you’ll be struggling to tell where the original damage was.

We can repair chips and damage to:

•Bathtubs •Basins •Benchtops •Tiles •Showerbases •ToiletBowls •SpaBaths

We can repair the following materials:

•Fibreglass •Acrylic •Polymarble •Porcelain •CeramicTiles•PressedSteel •CastIron •Concrete •TerrazzoandLaminex.

We also remove stains and scratches:

Bathtubs, shower bases, and basins can also be polished to remove surface stains and light surface scratches.

6

Bath Seal This is a great option for you to consider when having your bathtub re-enamelled.

Bathroom Werx’s Bath Seal is the ONLY permanent solution to dirty, unhygienic silicone and other tried methods used to seal the gap between the bathtub and the wall tiles.

We have designed a permanent solution so there are no more gaps, mould build up or unhygienic silicone between the bath rim and tiles.

Now with Bathroom Werx’s Bath Seal there is NO GAP. The bath connects directly to the tiles!

Just think, no more ugly grouting, mould or mildew around your bath – this unique permanent seal is the answer to all these unsightly problems.

Quick Fit WastesReplacing old outlets and drain covers used to mean ripping up old baths, basins and plumbing.

NOT ANY MORE.

You don’t have to worry about costly re-plumbing… there is none! In just 20 minutes, your new Bathroom Werx Quick Fit Waste is made to fit neatly and easily over your old one.Your old outlet will now look like new again adding a beautiful new touch to your bathroom.

Before Bath Seal

After Bath Seal

“Spring clean” your bathroom with the Bathroom Werx Makeover Service.

With this service we offer you the following:

• Regroutingserviceforwallandfloortiles.

• Removeoldsiliconandreplacewithnew.

• Degreasingandcleaningwall&floortiles.

• Degreasingandcleaningshowerscreen.

• Polishingthebathandbasin.

With new grout in the tiles, new silicon in all the corners, clean fresh tiles, as well as a polished bath and basin – you simply won’t recognise your bathroom!

It will just look great again!

Bathroom Werx Makeover Service

7

Pop-up Plug & Waste InsertsThis latest technology can transform your old dirty, discoloured wastes into modern Pop-up Wastes with no need for expensive re-plumbing or structural changes.

Designed and manufactured by Bathroom Werx, this easy to use pop-up waste means you will never need another plug again.

Before Pop-upBefore Quick Fit After Quick Fit After Pop-up Pop-up Plug

Cast Iron Bathtubs on Feet Relax in a by-gone era with one of our Australian made cast iron bathtubs on feet!

Dating back over one hundred years, the “Ball & Claw” bathtub has become a classic showpiece of Australian home history.

And whether your bathroom is traditional colonial or breathtakingly modern…, Bathroom Werx has the bathtub to suit your décor, adding elegance and style to your bathroom.

You can choose from our traditional shaped cast iron bathtubs on feet which come in three sizes:

• TheComfortBath(5feetinlength).

• TheTraditional(5feet,sixinchesinlength).

• TheKingGeorge(6feetinlength).

Or from one of our unique shaped Hi-Back cast iron bathtubs:

• TheVictorianSlipper(5feetinlength).

• TheColonialHi-Back(5feet,nineinchesinlength).

You may also wish to contrast your bathtub with a choice of polished brass, gold or chrome plated feet.

Your free-standing cast iron bathtub becomes an individual feature when its colour complements your bathroom décor.

That is why we manufacture your bathtub specifically for you which means you can have it made in any colour you like.

Take advantage of our colour matching service and we will help you match your bathtub to your tiles, basins, floor tiles …anything!

Bathtub & Tile CleanerKeepyourbathroomlookingbrandnewwithBathroomWerx’s unique Bathtub & Tile Cleaner.

Specially formulated to use on our Werx Enamel, Bathroom Werx’s Bathtub & Tile Cleaner is the perfect solution to clean and polish your bathroom enabling you to spend more time soaking in the bathtub rather than cleaning it!

Our Bathtub & Tile Cleaner contains a disinfectant to kill harmful bacteria, which can thrive in the moist conditions of your bathroom, and is designed to maintain the high gloss appearance of your re-enamelled fixtures and fittings so that they always look like new.

8

The Traditional

The Victorian Slipper

The Colonial High-Back

The Werx Enamel…

We’ve heated, boiled,

battered and bent our

Bathroom Werx enamel, and

nothing will beat it.

9

Before Re-enamelling

After Re-enamelling

Our Services Include:

Before and After Bathroom Services…

Our Customers Hotels, motels, hostels, hospitals, government housing departments, caravan parks, real estate agents, nursing homes, retirement villages, builders, plumbers, schools and of course private home owners.

Bathroom Werx is proud to service some of Australia’s leading hotels and government housing departments including:

• HolidayInn • MarriotHotel

• HiltonInternational • Rydges

• OfficeofHousing • DefenceForcesHousing.

The Bathroom Werx Enamel has been tried and tested over the last 20 years in more than 10,000 bathrooms right around Australia.

10

FeaturesBathroom Werx has formulated the unique Werx Enamel specifically for Bathrooms. You can be sure you’re getting a world class product as the Werx Enamel exceeds the following International Standards tests:

1. Adhesion (cross cut) ASTM 3359 A tests for individual molecular adhesion.

2. Adhesion (pull off) ASTM 3359 A tests for strength of the adhesion.

3. Impact Resistance S.A.B.S. 146 tests for the chip resistance of the new enamel.

4. Alkali and Acid Resistance B.S. 1390 tests the different personal cleaning products that are used day to day as well as the broad range of products that are used to clean bathroom surfaces.

5. Hot Water Resistance B.S. 1390 testing in constant boiling water to ensure the enamel does not crack or peel.

6. Abrasive Resistance S.A.B.S. 173 test whether the new enamel is hard enough to resist harsh cleaning.

Month after month, year after year, the Werx Enamel continues to stand up to the test of time. After 20 years of experience we’ve found nothing that will beat it!

Because it can expand and contract, the Werx Enamel is chip resistant, chemical resistant, heat resistant, abrasive resistant and mould and mildew resistant.

There are no harsh chemicals used during the Werx Enamelling process and no dangerous fumes to worry about. Our Technicians follow strict Occupational Health and Safety procedures to ensure a safe environment for you and your family.

That is why we can guarantee your new enamelled bathroom surfaces in writing for SEVEN years!

The Werx Enamel can be used to transform virtually any bathroom surface including cast iron, pressed steel, fibreglass, polymarble, ceramic tiles, lami-panelling, porcelain, laminex, vitreous enamel, concrete, plastic, acrylic,marble,granite,masonite,pebblemix,terrazoandjustaboutanything else you will find in a bathroom.

Co-ordinating colours is easy as we can always make a special colour for you or you can take advantage of our colour matching service to match to your existing bathroom fittings.

Bathroom Werx has you

covered Australia Wide

Servicing You… Head Office Australia

3 Harrow Street Preston Victoria 3072

Freecall 1800 644 171Telephone: +61 3 9474 6555 Facsimile: +61 3 9471 1199

Email: info@bathroomwerx.com

Website: www.bathroomwerx.com

11

Here’s what our customers say“We were planning on ripping out our bathroom and starting again. But when we came across the services you offered we were shocked by how much we could save.The finished result is a brand new bathroom and savings of many thousands of dollars. Thanks for a great job and we will be recommending your company to all our friends”.

Mr Steve F. Potts Point, NSW.

“My husband didn’t believe that this was the same bathroom he had showered in this morning before leaving for work. It simply looks brand new again and it’s so easy to clean”.

Mrs Rose I. Lower Templestowe, VIC.

Within a day of contacting you we received a signed quote accompanied by a very friendly informative letter outlining your service and detailing exactly what the re-coating would entail. On confirming the job we were informed that an operator could start earlier than usual to accommodate our special request. Your operator arrived on the dot and the job was done with no fuss, no bother and no mess to clean up! We recommend you unreservedly”.

Mrs Julie O. Indooroopilly, QLD.

With over 20 years experience Bathroom Werx is Australia’s leading bathroom re-enamelling and restoration specialist. Our references, contacts and reputation in the market place is second to none.

Whether you are a large Hotel Operator to a Home Renovator, a Real Estate Agent to a Manager of Retirement Villages and Nursing Homes or a Project Manager of Government Housing projects, Bathroom Werx has the specialised products and quality service ethic to restore your bathrooms with no fuss, no mess and without the hassle and expense of replacing!

We have experience in dealing with many of Australia’s leading Hotels, Governments Housing Departments, Real Estate Agency Groups and Builders.

Freecall 1800 644 171

WESTERN AUSTRALIAPerth

NORTHERN TERRITORYDarwinAlice SpringsTenant Creek

TASMANIAHobart Launceston

ACTCanberra

VICTORIAMelbourneGeelongMornington PennisulaBallaratBendigoSheppartonWangarattaCamperdownWarrnambool

NEW SOUTH WALESSydney GosfordCambelltownWollongongNewcastleCoffs Harbour Albury-Wodonga

QUEENSLANDBrisbaneGold CoastSunshine CoastTownsvilleCairns

SOUTH AUSTRALIAAdelaideGawlerVictor HarborMurray Bridge

Servicing your areaWe have Franchisees servicing the following locations across Australia:

Head Office Australia 3 Harrow Street Preston Victoria 3072

Freecall 1800 644 171Telephone: +61 3 9474 6555 Facsimile: +61 3 9471 1199

Email: info@bathroomwerx.com

Website: www.bathroomwerx.com

12

Freecall 1800 644 171www.bathroomwerx.com