Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to...

22
Onvermijdelijk Circulair Breakout sessie Beton Marit van Lieshout Jos Kronemeijer Yulia Kryazheva

Transcript of Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to...

Page 1: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Onvermijdelijk CirculairBreakout sessie Beton

Marit van LieshoutJos KronemeijerYulia Kryazheva

Page 2: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Doelstelling vanmiddag

1. Koppelen innovaties aan objecten in projecten

2. Uitleg over Klimaatenvelop

2

Page 3: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Klimaatenvelop•Geld voor meerkosten van metingen

• Inzicht in prestaties van technologie–object combinatie

• Vermindering milieu-impact (CO2 eq, MKI)

• Technische performance (levensduur en toepassingsafhankelijke criteria)

•Definitieve lijst met criteria beschikbaar via:• Site MVO: @@url@@

• Beschikbaar vanaf @@datum@@

3

Page 4: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Programma14:00

• Klimaatenvelop

• Technologie-object

• Normering

14:20• Pitches

14:40• Contact leggen

• Roundup

4

Page 5: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Technologieën

5

Page 6: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Soorten objecten

6

Page 7: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

7

Technologie–Object combinaties

Page 8: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

8

Technologie–Object combinaties

Page 9: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Technologie–Object combinaties

9

Page 10: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Normering

10

Page 11: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Pitches

11

•TU Delft

•GreenCem BV

•Heidelberg en VBI

• Stabicon

• Solidia

•DBF en RCM Holland

•ABT

Page 12: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

12

Page 13: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

13

Page 14: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

14

Page 15: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

15

Page 16: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

16

Page 17: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

17

Page 18: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

18

Page 19: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

19

Page 20: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

20

Page 21: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Round-up• Klimaatenvelop

• Technologie-object

• Normering

• Pitches

• Contact leggen

• Roundup

21

Page 22: Breakout sessie Beton YK2 - Afval Circulair · 30% less during binder production, the rest due to curing with CO On-par or superior material properties compared to OPC based concrete.

Hartelijk dank voor uw aandacht!

•Als u geïnteresseerd bent in vervolg bijeenkomsten laat uw kaartje dan achter!

•Bekijk alle presentaties van vandaag, publicaties en foto’s op: www.afvalcirculair.nl/rwscirculair

22