Brazed Plate Heat Excha nger CB30 / CBH30 de...CB30 / CBH30 Brazed Plate Heat Excha nger. General...
2
. CB30 / CBH30 Brazed Plate Heat Exchanger . General information Alfa Laval introduced its first brazed plate heat exchanger (BHE) in 1977 and has since continuously developed and optimized its performance and reliability. Brazing the stainless steel plates together eliminates the need for gaskets and thick frame plates. The brazing material seals and holds the plates together at the contact points ensuring optimal heat transfer efficiency and pressure resistance. The plate design guarantees the longest possible life. The design options of the brazed heat exchanger are extensive. Different plate patterns are available for various duties and performance specifications. You can choose a standard configuration BHE, or a unit designed according to your own specific needs. The choice is entirely yours. Typical applications - HVAC heating/cooling - Refrigerant applications - Industrial cooling/heating - Oil cooling Working principles The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, usually in countercurrent flow for the most efficient heat transfer process. Standard design The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. To improve the heat transfer design, the channel plates are corrugated. Particulars required for quotation To enable Alfa Laval’s representative to make a specific quotation, specify the following particulars in your enquiry: - Required flow rates or heat load - Temperature program - Physical properties of liquids in question - Desired working pressure - Maximum permitted pressure drop Examples of connections External threaded Internal threaeded Soldering Welding * More connections are available on request.
Transcript of Brazed Plate Heat Excha nger CB30 / CBH30 de...CB30 / CBH30 Brazed Plate Heat Excha nger. General...
-
.
CB30 / CBH30Brazed Plate Heat Exchanger
.
General informationAlfa Laval introduced its first brazed plate heat exchanger(BHE) in 1977 and has since continuously developed andoptimized its performance and reliability.
Brazing the stainless steel plates together eliminates the needfor gaskets and thick frame plates. The brazing material sealsand holds the plates together at the contact points ensuringoptimal heat transfer efficiency and pressure resistance. Theplate design guarantees the longest possible life.
The design options of the brazed heat exchanger areextensive. Different plate patterns are available for variousduties and performance specifications. You can choose astandard configuration BHE, or a unit designed according toyour own specific needs. The choice is entirely yours.
Typical applications- HVAC heating/cooling- Refrigerant applications- Industrial cooling/heating- Oil cooling
Working principlesThe heating surface consists of thin corrugated metal platesstacked on top of each other. Channels are formed betweenthe plates and corner ports are arranged so that the two mediaflow through alternate channels, usually in countercurrent flowfor the most efficient heat transfer process.
Standard designThe plate pack is covered by cover plates. Connections arelocated in the front or rear cover plate. To improve the heattransfer design, the channel plates are corrugated.
Particulars required for quotationTo enable Alfa Laval’s representative to make a specificquotation, specify the following particulars in your enquiry:- Required flow rates or heat load- Temperature program- Physical properties of liquids in question- Desired working pressure- Maximum permitted pressure drop
Examples of connections
Externalthreaded
Internalthreaeded
Soldering Welding
* More connections are available on request.
-
CB30 / CBH30 - PED approval pressure/temperature graph*
CB30 / CBH30 - UL approval pressure/temperature graph*
CB30 / CBH30 - KHK and KRA approval pressure/temperature graph*
Standard data
Min. working temperature see graphMax. working temperature see graphMin. working pressure vacuumMax. working pressure see graphVolume per channel, litres (ga) 0.054 (0.014)Max. particle size mm (inch) 1 (0.04)Max. flowrate* m3/h (gpm) 14.5 (63.7)Min. nbr of plates 4Max. nbr of plates 150* Water at 5 m/s (16.4 ft/s) (connection velocity)
Standard materials
Cover plates Stainless steelConnections Stainless steelPlates Stainless steelBrazing filler Copper
Standard dimensions and weight*
CB30A measure mm = 13 + (2.31 * n) (+/-2 mm or +/-1.5 %)A measure inch = 0.51 + (0.09 * n) (+/-0.08 inch or +/-1.5 %)Weight** kg = 1.2 + (0.11 * n)Weight** lb = 2.65 + (0.24 * n)
CBH30A measure mm = 15 + (2.31 * n) (+/-1.5 %)A measure inch = 0.59 + (0.09 * n) (+/-1.5 %)Weight** kg = 1.35 + (0.11 * n)Weight** lb = 2.98 + (0.24 * n)
(n = number of plates)* Excluding connections
Standard dimensionsmm (inch)
S3S3 S2S2
S4S4 S1S1
113 (4.45)
50 (1.97) A
250
(9.8
4)
313
(12.
32)
.
.
LiviuBText BoxCALOR SRLStr. Progresului nr. 30-40, sector 5, Bucurestitel: 021.411.44.44, fax: 021.411.36.14www.calorserv.ro - www.calor.ro
www.calorserv.rowww.calor.ro
