BRAKE DRUM AND ROTOR CATALOG · 2019-11-02 · DuraBrake Drums are Interchangeable with – The...

DU

RA

BR

AK

EBRAKEDRUM ANDROTORCATALOG

TRUCKS, TRAILERS, BUSES,And MANY OTHERS

DuraBrake

DuraBrake Brake DrumsDuraBrake Co. was started as Durametal Brake Co. in 1998 upon the acquisition of thebrake drum business from Durametal Corporation in Tualatin, Oregon. DuraBrakestrives to remain the leader in quality, high-performance specialty brake drum marketfor truck, bus and off-highway vehicles. This is possible by continuing to use theprocesses and quality systems established at Durametal Corporation over their 50 yearhistory.

We have hundreds of part numbers in our catalog that are stock items or can beproduced upon request in any quantities. Over 2000 custom part numbers have beenmade from the existing in-house patterns. These part numbers are well-known in theindustry and are the same part numbers used by Durametal. Customers for theseparts include distributors and end-users.

DuraBrake is a highly visible company known as the leader in specialty replacementbrake drums for truck/bus/off-highway equipment. We are gaining market share inthe truck and transit commodity replacement market with our high-quality,versatility, and cost-competiveness. Since 1948, DuraBrake* drums have served thetruck, trailer, and transit industries with the HIGHEST QUALITY and SERVICEunmatched in the industry.

…Are engineered to meet every type of braking application and road condition.

…Are made of the finest, controlled close-grain, high tensile iron, which meanslonger life and even wear.

…Are precision machined and individually inspected to insure each meet rigidstandards for MAXIMUM BALANCE and PERFECT FIT.

In keeping with our commitment to HIGH QUALITY and SERVICE, we areconstantly improving our engineering, foundry, machining, and testing techniquesto provide the SAFEST, LONGEST LASTING, and MOST ECONOMICAL brake

drum made.

DuraBrake Drums…

* Prior to 2002, DuraBrake drums were made under the name Durametal Brake Co. Prior to 1997, DuraBrake drumswere made by the same patterns, equipment and process technology utilized by Durametal Corp.

CHART OF DRUM STYLES

1

DuraBrake Brake Drums and Rotors

Information Required for Drums not Listed:

!

!

Type of Drum (as shown on chart)Dimensions:A - Inside DiameterB - Overall DepthC - Bolt Circle Diameter and Number of StudsD - Outside DiameterE - Hub Pilot DiameterF - Brake Face WidthG - Back Face WidthH - Dust Shield DiameterI - Dust Shield DepthJ - Out Board Pilot Diameter

Drums made to customer specifications are not returnable

DURABRAKE CO.P.O. BOX 1480 LOS ALTOS, CA 94022 (650)949-5365 www.durabrake.com


2

Maximum Brake Face Diameter

Maximum brake face diameters are indicated on DuraBrake brake drums. Forexample, the words “MAX. DIA. 16.620 in.” will be found on brake drums with 16 ½nominal brake face diameter. This means that for safe operation the brake facediameter should never exceed 16.620 inches from machining and/or wear. In general,maximum diameters for various nominal brake face diameters are set forth below:

NOMINAL MAX. BRAKE NOMINAL MAX. BRAKESIZE FACE DIA. SIZE FACE DIA.12.00 12.09 17.25 17.3712.25 12.34 18.00 18.1214.00 14.09 18.50 18.6214.50 14.62 20.00 20.1215.00 15.12 20.25 20.3716.00 16.12 22.00 22.1216.25 16.37 24.00 24.1216.50 16.62 26.00 26.1217.00 17.12 30.00 30.12

Note: Maximum Brake Face Diameter, may be higher than specified in the above table.For example, transit brake drums are designed thicker and have a greater allowance

Seven Hints for Longer Drum Life:

1. Buy DuraBrake drums.2. Whenever possible, a drum and matching liner should be turned after the drum’s

assembly with the hub.3. If a drum will not fit onto the hub without excessive force, there is something

wrong. The cause must be determined and corrected before further installation ifproper service is to be expected.

4. Bearings should always be kept tight in order to prevent the drum from pickingup the load with each application of the brakes.

5. Drums and lining should be checked at regular intervals. If uneven wear appears,drums and lining should be resurfaced or replaced. Always replace drums inpairs.

6. Where liquid coolant is used, the installation must be such that an ample supplyof coolant is supplied at all times. Whenever possible, coolant should be appliedinside the drum at the source of the heat. Never apply coolant to a drum that hasexcessive heat or temperature.

7. Never set brakes when drums are hot.


3

DuraBrake Drums are Interchangeable with …

The heavy duty brake drum industry players have changed significantly in the US in recentyears. There has been a major integration in the industry, disappearance of some producers andmassive entry of imported brake drums in the high volume applications. Pricing has become amajor factor affecting the market especially in the high volume applications. Pricing of brakedrums is complicated in the case of replacement and specialty brake drums based on factors suchas:

Quantity purchased affects volume discounts and terms for shippingBalancing of the brake drums when neededSpecial sizing and machiningType of alloys offeredPattern availabilityOther special requests

At DuraBrake we are well positioned to serve a broad range of specialty brake drums as we havethe following advantage:

Range of patternsUnique no-bake molding set up for quick change of patternsOur own foundry and machine shop with unique features for brake drum productionProprietary alloys for different applicationsIn-house engineering capability to reverse engineer new part numbersAbility to custom produce small quantity orders

Interchangeability is a function of flexibility. Perhaps we have the greatest flexibility to meet themarket needs from all perspectives. We can compete for high-volume commodity brake drums,transit drums, and low-volume specialty drums. Our Richland, Washington facility allows us toengineer and manufacture specialty brake drums to customer requirements.

Our brake drums for the aftermarket are widely interchangeable with a brake drum part numbersproduced by other companies such as:

Some of the above companies produce for OEM customers or captive production only. Othersmay produce for OEM and aftermarket applications. However, no producer is structured andpositioned to serve the market as DuraBrake with six large distribution centers nationwide. Wespecialize in competing with other producers and in several cases we can be the only sourcebecause of our flexibility. Our older catalogs show interchangeable parts. However, toaccommodate regular changes in the market we are maintaining an ongoing matrix ofinterchangeable parts with all producers including Webb, Gunite, ArvinMeritor, Dayton,Rockwell, KIC/Reyco, ConMetco, and many others. Please feel free to call us for your brakedrum requirements: small or large, high volume or specialty, current or old equipment, and newreverse engineered brake drums.

!

!

!

!

!

!

!

!

!

!

!

!

Webb KIC/Reyco All OEM brandsGunite Dayton

ConMetcoRockwell


4

Numerical Listing DuraBrake Brake Drums and Rotors

DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes

Dia. Special Information

1201 65 A 12.00 8.50 6.50 6.25 8.75 6 0.81 Spot face 6 holes 1.870

1202 65 A 12.00 8.50 6.50 7.13 8.75 6 0.81 Spot face 6 holes 1.870

1203 75 A 12.00 9.19 7.19 7.13 8.75 6 0.81 Spot face 6 holes 1.870

12055 50 F 12.60 7.00 3.69 6.77 8.75 6 0.89

1207 60 B 12.00 7.75 6.75 7.25 10.00 6 0.66 Spot face 6 holes 1.870

1208 47 B 12.25 6.81 6.25 8.50 10.00 6 0.66 Spot face 6 holes 1.870

1209 62 A 12.25 9.00 6.50 6.25 8.75 6 0.81 Spot face 6 holes 1.870

1210 70 A 12.25 9.00 6.50 7.13 8.75 6 0.81 Spot face 6 holes 1.870

12101 70 A 12.25 9.06 6.63 7.13 8.75 10 0.81 Spot face 10 holes 1.870

1211 60 B 12.25 7.44 6.50 8.50 10.00 6 0.66

12121 60 D 12.25 7.13 5.38 7.13 8.75 10 0.81 Spot face 10 holes 1.870

12125 60 D 12.25 7.13 5.38 6.25 8.75 10 0.81 Spot face 6 holes 1.870

12126 60 D 12.25 7.13 5.38 7.13 8.75 10 0.81 Spot face 6 holes 1.870

12127 60 F 12.13 7.12 2.50 5.19 6.50 8 0.69

12128 70 D 12.25 9.50 7.75 6.25 8.75 10 0.81 Spot face 6 holes 1.870

1213 65 A 12.25 7.50 5.63 6.25 8.75 6 0.81 Spot face 6 holes 1.870

1214 60 B 12.25 6.50 5.94 7.25 10.00 6 0.66 Spot face 6 holes 1.870

12153 60 D 12.25 7.63 6.37 7.50 8.75 6 0.81

1216 60 B 12.25 7.44 6.50 6.75 8.75 6 0.66

1217 65 A 12.00 8.50 6.50 6.25 8.00 5 0.81

12172 65 D 12.25 8.19 6.20 6.25 8.75 6 0.81 Spot face 6 holes 1.870

12173 28 F 12.13 5.00 3.00 6.50 8.00 5 0.89

1218 75 A 12.00 9.19 7.19 7.13 8.75 6 1.06 Spot face 6 holes 1.870

1220 80 A 12.00 10.50 6.75 6.75 8.75 6 0.81 Spot face 6 holes 1.870

1221 71 A 12.00 9.19 7.19 7.25 8.75 6 0.81 Spot face 6 holes 1.870

1224 75 A 12.25 10.75 8.13 7.13 8.75 6 0.94 Spot face 6 holes 1.870

1226 75 M 12.25 9.25 6.75 7.13 8.75 6 0.81 Spot face 6 holes 1.870

1227 75 M 12.25 9.25 6.25 7.13 8.75 6 0.94 Spot face 6 holes 1.870

12306 38 C 12.60 5.81 3.56 5.70 8.00 5 0.75

12311 50 O 12.00 4.75 5.38 6.44 7.25 8 0.38

12330 50 B 12.00 5.63 5.25 8.25 9.25 8 0.53

12365 78 E 12.25 9.13 8.41 7.25 8.75 6 0.81

1241 75 A 12.25 10.75 8.13 7.13 8.75 6 0.81 Spot face 6 holes 1.870

12414 75 A 12.25 10.75 8.13 7.25 8.75 6 0.81 Spot face 6 holes 1.870

1243 80 A 12.25 10.75 8.13 6.25 8.75 6 0.94 Spot face 6 holes 1.870

12432 55 U 12.61 7.00 3.69 6.77 8.75 6 0.89

1244 75 A 12.25 10.75 8.13 7.13 8.75 10 0.81 Spot face 10 holes 1.870

12444 75 A 12.25 10.75 8.13 7.25 8.75 10 0.81 Spot face 10 holes 1.870

1245 75 A 12.25 10.09 7.81 7.13 8.75 10 0.81 Spot face 10 holes 1.870

1250 40 M 12.50 5.88 3.00 6.75 8.75 6 0.81

12506 66 B 12.25 8.63 7.81 7.13 8.75 6 0.81

1251 62 B 12.25 8.63 7.81 7.13 8.75 10 0.81

12592 40 Q 12.41 5.91 3.56 7.88 9.84 6 0.81

12595 50 H 12.41 6.44 3.58 6.29 8.75 10 1.03

12617 75 L 12.25 8.88 8.06 8.50 10.00 6 0.66 6 holes .656 * 3 holes .656

12630 70 A 12.25 8.59 6.25 7.13 8.75 10 0.81 Spot face 6 holes 1.870

12634 75 A 12.25 8.59 6.25 7.13 8.75 6 0.81 Spot face 6 holes 1.870

12635 83 A 12.25 10.47 8.12 7.12 8.75 6 0.81

12637 73 L 12.25 9.06 8.06 7.00 8.25 12 0.66 6 holes .656 * 6 holes .530

12638 65 L 12.25 7.50 6.50 7.50 8.75 6 0.53

12709 28 B 12.00 4.13 3.63 4.75 6.50 8 0.69

12800 53 C 12.61 7.28 5.31 6.45 8.75 6 0.88

12960 45 O 12.00 4.75 5.38 6.44 7.25 12 0.44

1297 25 B 12.50 3.63 3.33 10.25 11.25 12 0.56

12999 70 A 12.25 9.25 6.75 7.13 8.75 10 0.81

13037 51 C 13.00 6.44 3.06 4.59 6.50 8 0.56 2 mtg holes .437

13038 51 C 13.00 6.44 3.06 4.59 6.50 8 0.63 2 mtg holes .437

13111 32 D 12.80 4.57 3.47 10.04 11.02 6 0.52 4 holes M12 X 1.25 tapped

13112 39 D 12.80 5.35 4.26 10.04 11.02 6 0.52 4 holes M12 X 1.25 tapped

13113 38 R 13.00 4.25 2.48 3.94 5.50 5 0.63

5

DuraBrake Brake Drums and Rotors Numerical Listing

DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


13125 40 C 13.00 7.88 3.13 5.19 6.50 8 0.69

1313 32 R 13.00 4.75 3.00 4.88 6.00 6 0.42

1317 48 F 14.00 7.00 3.00 7.13 8.75 6 0.81

13174 39 H 14.13 6.47 4.06 6.00 8.00 5 0.88

13243 33 D 13.00 3.38 2.50 6.13 11.25 10 0.88

1329 65 F 14.00 7.59 2.95 7.13 8.75 6 0.81

13303 25 E 14.00 3.50 2.59 10.00 11.00 5 0.53

13380 31 RO 13.36 4.34 2.00 5.14 6.50 5 0.66 Disc Rotor

13381 31 RO 13.36 4.34 2.00 5.14 6.50 6 0.66 Disc Rotor

13382 22 RO 12.31 1.79 2.03 4.65 5.81 8 0.66 Disc Rotor

13574 40 H 14.13 5.38 2.75 6.25 7.25 6 0.63

13632 60 F 14.00 8.03 3.42 7.13 8.75 6 0.81

13717 36 C 13.00 8.70 4.02 5.20 6.50 8 0.69

13845 33 D 14.00 4.00 3.00 4.61 5.50 6 0.50 5.50-6-.500 * 6-6-.500

13906 45 F 14.00 7.12 3.00 6.44 8.00 5 0.81

13911 30 H 14.13 5.94 3.30 6.75 8.00 5 0.91

13918 65 F 14.00 7.56 2.82 6.44 8.00 5 0.81

1401 80 H 15.00 8.44 5.50 8.69 11.25 10 1.03 5 mtg holes .562 * O.B. pilot 12.750

14011 110 E 15.50 9.25 7.68 11.06 13.19 10 0.98 2 mtg holes M14 X 2 tapped

14012 100 E 15.00 7.31 6.68 11.18 13.19 10 1.06 2 mtg holes .515 * 2- M14 X 2

14013 90 E 15.50 10.63 8.75 11.06 13.19 10 0.98

14015 105 H 15.00 9.41 5.13 6.75 8.75 6 0.84 3 mtg holes .531

14016 85 E 15.00 10.25 7.88 8.70 10.81 8 0.87 2 holes M12 X 1.25 tapped

14017 85 E 15.00 10.25 7.44 11.06 13.19 10 1.03 2 holes M12 X 1.50 tapped

14018 35 E 15.00 4.14 3.56 10.00 11.00 5 0.53

1402 85 F 15.00 8.25 5.44 6.45 8.75 10 0.75 3 mtg holes .531 * O.B.pilot 11.250

14025 110 E 15.00 9.09 8.59 11.06 13.19 10 1.04

14026 110 E 15.00 9.25 8.62 11.22 13.19 10 0.89 2 holes M12 X 1.75 tapped

1403 120 U 15.00 8.75 6.70 9.44 11.25 10 1.31 5 mtg holes .562 * Notched


14039 145 H 15.13 8.66 6.72 9.44 11.25 10 1.31 5 mtg holes



14049 180 H 15.13 12.38 10.58 9.44 11.25 10 1.31 5 mtg holes .562

1405 98 K 15.00 7.63 6.38 6.25 8.75 6 0.81 Outboard pilot 10.500

14054 72 M 15.00 6.94 4.33 8.36 11.25 10 1.31

14055 99 F 15.00 9.31 7.50 9.38 11.25 10 0.81

14057 55 D 15.00 6.53 3.97 9.44 11.25 10 1.31

1406 55 E 15.00 6.25 5.56 11.25 12.75 5 0.66

1407 75 D 15.00 6.06 4.19 9.00 11.25 10 1.25

14072 45 I 15.00 4.31 3.56 9.00 10.50 5 0.53

14078 70 A 15.00 5.26 4.31 9.50 11.25 6 0.78

1408 60 P 15.00 5.63 4.13 7.50 9.00 5 0.53

14084 80 E 15.00 9.03 6.34 10.94 13.19 10 1.25

14085 110 E 15.00 9.29 7.50 11.22 13.19 10 0.91 2 mtg holes .437 * 2- M12 X 1.75

14086 92 E 15.00 9.15 7.40 11.22 13.19 10 0.91

14088 55 F 15.00 5.75 3.94 8.75 11.25 10 0.81 3 mtg holes .531

1409 95 B 15.00 7.38 6.88 11.25 12.75 5&6 0.66

14094 70 A 15.00 6.13 4.38 9.50 11.25 6 0.78 Notched for sensor

1410 90 I 15.00 8.38 7.38 8.66 11.25 10 0.81

14101 60 F 15.00 6.75 4.00 7.50 9.00 5 0.50

14104 66 D 15.00 6.47 4.44 6.00 8.00 5 0.88

14105 66 H 15.00 7.08 4.75 7.19 8.75 10 0.81

14106 85 A 15.00 8.50 6.56 9.75 11.25 10 0.81

1411 75 F 15.00 7.50 4.50 6.06 8.75 6 0.81 3 mtg holes .343 * O.B. pilot 11.250

14111 70 D 15.00 7.56 5.50 9.44 11.25 10 1.25

14112 70 D 15.00 7.44 5.50 9.44 11.25 10 0.81

14113 85 H 15.00 8.50 5.50 6.44 8.75 6 1.25 3 mtg holes .531 * O.B.pilot 11.250

14115 70 N 15.00 7.44 5.25 9.00 11.25 10 1.25

14116 83 Q 15.00 9.00 6.50 9.75 11.25 5 0.66

6


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes



14119 100 H 15.00 10.59 7.75 9.00 11.25 10 0.65 Outboard pilot 13.380

1412 60 G 15.00 5.94 5.38 10.63 12.00 5&6 0.66 Outboard pilot 13.250

14121 65 I 15.00 5.56 4.00 7.00 8.00 5 0.52

14124 75 D 15.00 7.88 4.50 9.44 11.25 10 0.81

14125 85 A 15.00 8.13 5.50 9.44 11.25 10 0.81

14126 55 H 15.00 5.13 4.25 9.00 11.25 10 0.81

1413 70 K 15.00 6.56 4.56 6.25 8.75 6 0.81

14139 80 G 15.00 8.38 7.50 11.25 12.75 5&6 0.66 Step hub pilot 14.250

1414 75 B 15.00 8.06 7.50 11.25 12.75 5 0.66

1415 70 F 15.00 8.25 5.44 6.44 8.75 6 0.81 3 mtg holes .343 * O.B. pilot 11.250

14151 92 Q 15.00 8.86 5.25 8.78 11.25 10 1.31

14153 97 F 15.00 9.00 5.44 9.00 11.25 10 1.31

14154 52 E 15.00 6.06 5.00 9.50 11.25 10 1.25

14155 83 F 15.00 9.00 6.69 7.50 8.75 6 0.81

14156 110 H 15.00 9.81 6.50 9.00 11.25 10 1.31

14158 82 Q 15.00 8.91 4.40 9.00 11.25 10 1.31

14159 75 F 15.00 8.38 6.38 9.00 11.25 10 1.31

1416 70 E 15.00 4.53 4.00 10.00 11.00 5 0.53

14161 80 D 15.00 7.75 4.50 8.69 11.25 10 1.31 5 mtg holes .560

14166 77 M 15.00 8.00 5.75 6.44 8.75 6 0.78

14167 78 R 15.00 8.00 5.56 6.52 8.75 6 0.81

14169 82 M 15.00 8.00 5.75 6.44 8.75 10 0.78

1417 53 I 15.00 6.00 4.94 11.00 12.50 5&6 0.53

1418 75 P 15.00 7.38 5.25 6.25 8.75 6 0.81

14186 46 P 15.00 4.69 3.50 6.44 8.00 5 0.66

1419 56 E 15.00 6.25 5.56 11.00 12.50 5&6 5 holes .531 * 6 holes .656

14201 83 E 15.00 8.50 7.36 10.50 12.75 5 0.78

1421 80 Q 15.00 8.13 6.63 11.00 12.50 5 0.66 Spot face 5 holes 1.870

1422 70 I 15.00 6.50 5.38 9.50 11.25 10 0.81

14223 82 F 15.00 8.56 4.59 8.75 11.25 10 0.81

1423 70 I 15.00 6.50 5.38 9.50 11.25 6 0.66

14234 60 D 15.00 4.56 3.42 6.13 11.25 10 0.88

14236 95 E 15.00 7.00 6.37 11.18 13.19 10 1.06 2 mtg holes .515 * 2- M14 X 2

14239 75 D 15.00 8.38 5.50 8.69 11.25 10 1.31 5 mtg holes .562

14243 45 I 15.00 4.42 3.81 9.00 10.50 5 0.66

14244 62 I 15.00 5.42 4.50 9.19 11.25 5 0.66

14245 61 I 15.00 5.55 4.50 9.19 11.25 5&6 0.78

14249 67 F 15.00 8.06 3.75 7.13 8.75 6 0.81

14252 72 T 15.00 3.81 3.50 9.44 11.00 5&6 0.53 Step hub pilot 12.001

14254 97 Q 15.00 9.22 5.50 9.00 11.25 10 1.31

14255 105 F 15.00 9.22 5.90 8.53 11.25 10 1.31

14256 110 H 15.00 9.81 6.50 8.53 11.25 10 1.31

14259 75 I 15.00 7.91 6.61 9.44 11.25 10 0.81

1426 63 F 15.00 7.00 5.38 9.38 11.25 10 0.81

1427 75 I 15.00 7.00 5.63 11.00 12.50 6 0.66 Spot face 6 holes 1.380

14271 66 D 15.00 6.41 4.59 6.25 8.75 6 0.81

14273 95 F 15.00 8.76 5.45 8.53 11.25 10 1.28

14274 90 F 15.00 8.75 5.45 8.53 11.25 10 1.28

14278 63 E 15.00 5.38 4.78 6.44 8.00 5 0.66

14279 61 B 15.00 5.38 4.87 6.44 8.00 5 0.66 6 holes .310-18 UNC-2B tapped

1428 77 E 15.00 8.38 7.75 11.25 12.75 5&6 0.78

14285 53 F 15.00 6.91 3.47 6.44 8.75 6 0.78

14286 53 F 15.00 6.91 3.47 6.44 8.75 10 0.72

1429 75 L 15.00 7.19 6.00 9.75 11.25 6 0.78 Spot face 6 holes 1.380

14291 82 L 15.00 8.56 4.53 9.50 11.25 10 0.81

14299 95 H 15.00 10.12 7.63 9.44 11.25 10 1.31 5 mtg holes .656

1430 85 L 15.00 7.19 6.00 9.75 11.25 10 0.81

14302 75 D 15.00 7.88 4.56 8.78 11.25 10 1.31

1431 85 Q 15.00 8.97 6.50 8.53 11.25 10 1.03

7


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


14313 95 Q 15.00 8.38 7.38 10.50 12.75 5 0.78 Use K exciter hole pattern

1432 75 I 15.00 7.50 6.50 9.50 11.25 10 0.81

14326 79 D 15.00 7.78 6.44 7.13 8.75 6 0.81

1433 80 B 15.00 7.50 6.75 9.50 11.25 6 0.66

14331 95 F 15.00 8.79 6.98 8.99 10.83 10 0.81

14345 82 C 15.00 7.60 4.85 7.13 8.75 10 0.81

14351 85 E 15.00 8.75 8.22 10.66 13.19 10 1.28

1436 85 E 15.00 8.06 7.50 11.25 12.75 5 0.78

1437 85 I 15.00 8.19 7.00 9.75 11.25 10 0.81

14372 103 Q 15.00 9.22 5.74 8.78 11.25 10 1.28

1438 99 I 15.00 8.19 7.00 9.75 11.25 6 0.78

1439 76 E 15.00 8.13 7.69 9.44 11.25 10 0.81

14391 83 E 15.00 7.48 6.38 11.25 12.75 6 0.66

14394 38 E 15.00 3.94 3.38 10.00 11.25 5 0.53

14395 76 E 15.00 8.16 7.44 9.50 11.25 10 0.81

1440 66 C 15.00 7.75 4.63 6.44 8.75 6 0.81

14402 64 F 15.00 6.69 4.00 7.13 8.75 5 0.81

14408 90 H 15.00 9.08 6.40 7.00 8.75 6 0.81

14409 90 H 15.00 9.08 6.40 7.00 8.75 10 0.78

1441 80 F 15.00 7.75 4.63 6.44 8.75 6 1.25 3 mtg holes .562

14411 81 F 15.00 8.02 4.32 9.00 11.25 10 1.28

14415 61 F 15.00 7.31 5.50 7.50 8.75 6 0.81

14417 65 P 15.00 5.38 4.38 9.25 11.25 5 0.78

14419 118 U 15.00 8.63 6.62 9.44 11.25 10 1.31 5 mtg holes .562

1442 80 C 15.00 7.75 4.75 6.44 8.75 10 0.81 3 mtg holes .406

14422 96 F 15.00 9.50 6.44 7.00 8.75 10 0.75

1443 65 I 15.00 6.50 5.50 9.44 11.00 5 0.66

14437 82 Q 15.00 8.81 5.31 8.78 11.25 10 0.94

14441 75 Q 15.00 7.22 4.25 9.00 11.25 10 1.28

14446 54 Q 15.00 5.00 3.50 6.25 8.00 5 0.53

1445 80 F 15.00 7.81 5.44 6.25 8.00 5 0.81

14455 71 F 15.00 8.22 3.75 9.50 11.25 10 0.81

14456 78 D 15.00 8.69 6.75 9.38 11.25 10 0.81

1446 80 F 15.00 7.81 5.44 6.25 10.00 8 0.81

14463 82 E 15.00 7.44 6.38 11.25 12.75 6 0.78

14474 95 F 15.00 9.94 6.50 7.00 8.75 10 0.78

14482 75 F 15.00 7.84 4.44 9.50 11.25 10 0.81

14488 80 Q 15.00 7.00 4.50 6.25 8.75 6 0.81

14489 80 Q 15.00 7.00 4.50 6.25 8.00 5 0.81

1450 77 E 15.00 8.00 7.31 9.50 11.25 10 0.81

14503 97 U 14.50 7.88 4.75 9.44 11.25 10 1.31 5 mtg holes .562 * O.B. pilot 12.750




1451 85 D 15.00 8.50 6.56 9.00 11.25 10 0.81








1452 85 F 15.00 8.44 5.50 6.25 8.75 6 0.66 3 mtg holes .406

14523 186 T 14.50 12.88 10.50 9.44 11.25 10 1.31 5 mtg holes .562 * Circular ribs

14525 97 T 14.50 8.31 6.06 9.44 11.25 10 1.31 5 mtg holes .562 * Circular ribs

14529 82 F 15.00 8.86 4.53 8.75 11.25 10 1.31

1453 85 D 15.00 8.50 6.56 9.75 11.25 5 0.66


1454 85 D 15.00 8.56 7.00 9.44 11.00 6 0.66

14541 87 F 15.00 8.75 4.50 9.00 11.25 10 1.31

8


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


14542 87 F 15.00 8.75 4.50 9.00 11.25 10 0.81

14545 100 Q 15.00 9.04 5.56 8.78 11.25 10 0.94

14546 84 F 15.00 8.98 5.50 8.75 11.25 10 0.81

14549 95 Q 15.00 9.04 5.54 9.00 11.25 10 1.28

1455 85 E 15.00 8.38 7.84 11.00 12.50 5&6 0.66


1456 82 Q 15.00 8.94 6.44 9.44 11.25 10 0.81

14563 49 E 15.00 4.50 4.09 9.75 10.88 5 0.59

14566 69 E 15.00 7.16 6.44 9.44 11.00 5&6 0.66

14569 97 Q 15.00 9.22 5.50 9.00 11.25 10 1.31

1457 90 I 15.00 9.00 7.81 9.75 11.25 6 0.81

14571 75 D 15.00 5.88 4.50 9.25 11.25 5&6 0.78

14572 75 D 15.00 5.88 4.50 9.25 11.25 6 0.78

14574 95 F 15.00 8.87 5.38 8.78 11.25 10 0.94

14575 78 F 15.00 8.87 5.38 8.78 11.25 10 1.31

14576 107 H 15.00 10.59 7.75 9.00 10.83 8 0.97

14579 84 F 15.00 8.44 4.49 6.29 8.00 5 0.81

1458 90 I 15.00 9.00 7.81 9.75 11.25 10 0.81

14581 85 H 15.00 8.81 6.37 6.75 8.75 6 0.81

1459 90 D 15.00 9.50 7.56 9.75 11.25 5 0.66

1460 95 B 15.00 7.06 6.37 9.75 11.25 5 0.66


14635 77 F 15.00 8.09 3.50 6.75 8.75 6 0.81 3 mtg holes .531

1464 85 Q 15.00 8.75 6.25 8.66 11.25 10 0.81

14647 75 D 15.00 7.88 4.56 8.66 11.25 10 1.31


1466 70 I 15.00 6.78 5.56 11.25 12.75 5 0.66 Spot face 5 holes 1.380

14668 80 F 15.00 7.56 4.13 9.50 11.25 10 0.81

1467 62 H 15.00 7.19 4.88 6.28 8.75 6 0.81 3 mtg holes .343

14674 75 D 15.00 7.84 4.44 8.78 11.25 10 1.28

14675 90 D 15.00 8.91 5.38 8.78 11.25 10 1.28

1468 95 H 15.00 9.47 7.31 9.00 11.25 10 0.81 3 mtg holes .562

14682 132 H 15.00 9.81 6.50 9.00 11.25 10 1.31 Outboard pilot 13.125

14683 100 H 15.00 8.02 4.70 9.00 11.25 10 1.31 Outboard pilot 13.125

14684 110 H 15.00 8.86 5.50 8.78 11.25 10 0.94

14685 132 H 15.00 9.84 6.54 9.00 10.83 8 0.97

14689 90 I 15.00 7.50 6.25 9.38 11.25 10 0.81

1469 80 E 15.00 8.38 7.84 11.00 12.50 5 0.78

1470 78 E 15.00 8.16 7.44 9.50 11.25 5&6 0.78

14702 65 H 15.00 8.19 5.50 7.00 8.75 10 0.71

1471 80 E 15.00 8.13 7.50 9.50 11.25 10 0.81

14717 80 P 15.00 7.25 5.38 6.25 8.75 6 0.81

14718 80 P 15.00 7.25 5.38 7.13 8.75 6 0.81

1472 85 E 15.00 8.38 7.84 9.44 11.25 10 0.81

14729 110 F 15.00 8.56 4.88 7.13 8.75 6 0.81

1473 85 E 15.00 8.63 8.13 9.00 11.25 10 0.81

14731 95 Q 15.00 8.74 5.25 8.78 11.25 10 1.00

14735 70 F 15.00 8.02 5.47 6.25 8.75 6 0.81

14736 76 F 15.00 8.54 6.50 6.25 8.75 6 0.84

1474 79 E 15.00 8.63 8.13 9.44 11.25 10 0.81

1475 63 F 15.00 7.00 5.38 9.38 11.25 10 0.81

14751 63 F 15.00 7.00 5.38 9.38 11.25 10 1.19

14756 82 F 15.00 8.06 4.03 8.69 11.25 10 1.31

1476 65 F 15.00 6.06 3.50 6.25 8.75 6 0.81

14762 75 F 15.00 7.81 5.44 6.25 8.75 6 0.81

14763 75 F 15.00 7.19 4.00 6.44 8.75 6 1.25 3 mtg holes .562

1478 70 F 15.00 6.50 4.75 9.38 11.25 10 0.81

1479 70 P 15.00 6.63 4.44 6.75 8.00 5 0.88

14792 90 Q 15.00 9.18 4.66 8.66 11.25 10 1.28

1480 85 Q 15.00 8.69 6.31 11.00 12.50 5&6 0.66 Spot face holes 1.380

9


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


14806 105 F 15.00 10.94 7.50 6.44 8.75 6 0.81

1481 89 D 15.00 9.47 7.31 9.44 11.25 10 0.81


14828 75 I 15.00 7.94 6.69 11.25 12.75 5 0.66 Step hub pilot 14.250

1483 85 E 15.00 8.13 7.50 9.44 11.00 5 0.78

1484 76 E 15.00 8.13 7.50 9.44 11.00 6 0.78

14848 52 Q 15.00 6.06 3.93 10.00 11.00 5 0.56

1485 75 E 15.00 7.19 6.50 11.25 12.75 5&6 0.66

14853 117 H 15.00 10.70 7.48 11.23 13.19 10 0.91 3 mtg holes M12 X 1.75 tapped

14859 75 P 15.00 6.75 5.52 6.25 8.75 6 0.84

1486 83 I 15.00 8.72 7.63 11.00 12.50 5 0.66 Spot face 5 holes 1.380

14863 80 E 15.00 4.19 3.38 7.44 8.75 6 0.94

1487 80 E 15.00 8.00 7.44 11.00 12.75 6 0.66

14877 86 E 15.00 8.50 7.47 11.00 12.50 5&6 0.66

1488 85 E 15.00 8.13 7.63 9.44 11.25 10 1.03


1491 70 R 15.00 6.25 5.25 5.13 8.00 5 0.81

14913 73 B 15.00 6.18 5.49 9.25 11.25 6 0.78


14943 90 Q 15.00 9.04 4.53 9.00 10.83 8 0.97

14945 92 Q 15.00 9.04 4.53 8.78 11.25 10 0.94

14947 87 Q 15.00 8.81 4.35 8.78 11.25 10 1.31

1496 75 H 15.00 7.63 5.50 6.75 8.00 5 0.81

1497 51 A 15.00 5.31 4.13 10.00 11.25 5 0.53

14971 108 F 15.00 10.59 7.75 8.53 11.25 10 0.81 Outboard pilot 13.250

14972 108 F 15.00 10.38 7.75 8.66 11.25 10 0.81 Outboard pilot 13.250

14973 105 F 15.00 10.38 7.53 8.53 11.25 10 0.81 Outboard pilot 13.250

14974 108 F 15.00 10.09 7.25 8.53 11.25 10 0.81 Outboard pilot 13.250

14975 108 F 15.00 10.25 7.50 8.53 11.25 10 0.81 Outboard pilot 13.250

14977 105 F 15.00 10.59 7.75 8.78 11.25 10 0.94 Outboard pilot 13.250

14989 105 H 15.00 11.59 9.21 9.00 10.83 8 0.97

1499 55 E 15.00 6.03 5.50 9.44 11.00 5&6 0.66

1500 65 B 16.00 6.13 5.44 9.50 11.25 6 0.66

1501 65 B 16.00 6.13 5.44 10.00 11.50 6 0.66

1503 70 B 16.00 6.50 5.88 10.00 11.50 6 0.66

1504 80 B 16.00 7.50 6.50 9.50 11.25 10 0.81

1505 80 B 16.00 7.50 6.50 9.50 11.25 6 0.66

15055 80 S 16.10 8.94 5.13 9.06 10.83 8 0.80

1506 80 B 16.00 7.50 6.50 10.00 11.50 6 0.66

1507 90 B 16.00 8.25 7.50 9.50 11.25 10 0.81

15074 78 S 16.10 7.75 5.10 9.06 10.83 8 0.82 2 mtg holes M12 X 1.5 tapped

15076 65 R 16.25 6.84 3.84 6.28 8.75 6 1.03 3 mtg holes .531

1509 95 Q 16.00 9.75 6.53 11.00 12.50 6 0.66 Spot face 6 holes 1.380

15102 100 H 16.00 8.85 5.56 9.00 11.25 10 0.84

15111 126 H 16.14 9.22 6.75 9.47 11.25 10 1.26 3 holes M12 X 1.75 tapped

15112 126 H 16.14 9.22 6.75 9.47 11.25 10 1.26 3 holes M12 X 1.75 tapped

15113 134 H 16.14 11.87 9.31 11.74 13.19 15 0.94 3 holes M12 X 1.5 tapped

15114 145 H 16.14 10.63 7.64 11.62 13.19 5&10 5 holes .718 * 10 holes .906

15115 98 H 16.14 8.38 6.63 11.74 13.19 10 0.89 Outboard pilot 14.530

15116 150 H 16.14 11.26 9.20 9.42 11.25 10 1.28 Outboard pilot 12.917

15117 110 H 16.14 10.12 7.94 11.07 13.19 10 1.03 2 holes M12 X 1.75 tapped

15121 60 K 16.25 6.06 4.06 9.00 11.25 10 1.25

15124 100 H 16.14 10.63 7.64 11.62 13.19 5&10 5 holes .718 * 10 holes .906

15136 80 K 16.00 8.00 6.63 6.25 8.00 5 0.81

15152 80 C 16.00 8.53 5.94 7.50 8.75 6 0.81

15161 70 B 16.00 7.06 5.50 11.00 12.50 5 0.66

15164 95 Q 16.00 9.75 6.50 9.38 11.25 10 0.81

15165 90 Q 16.00 9.13 6.50 9.38 11.25 10 0.81

15169 38 B 16.00 3.28 2.84 9.88 11.00 6 0.52 Step hub pilot 12.000

15177 89 J 16.00 8.38 6.50 11.50 12.75 5 0.65 Outboard pilot 14.250

10


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


15179 85 B 16.00 7.16 4.31 8.69 11.25 10 1.28 5 mtg holes .515

1520 80 N 16.00 7.50 5.63 6.25 8.75 6 0.81

1521 65 K 16.25 5.53 3.72 7.50 9.00 5 0.53

15219 65 K 16.25 5.44 3.75 7.00 8.00 5 0.53

1522 80 A 16.00 7.50 5.63 6.25 11.25 10 0.81

1523 70 A 16.00 7.25 5.50 9.44 11.25 10 0.81

15231 98 C 15.75 8.50 5.63 8.66 11.25 8 0.88

1525 85 K 16.00 8.00 6.63 6.25 8.75 6 0.81

15251 75 J 16.00 6.91 5.91 10.63 12.00 5 0.66 Step hub pilot 13.250

15254 55 D 16.25 5.25 3.63 9.50 11.25 12 0.52

15287 95 E 15.50 10.00 9.50 11.06 13.19 10 1.03

15288 100 E 15.50 10.69 8.38 11.06 13.19 10 1.03

1529 85 A 16.00 8.00 6.63 6.25 11.25 10 0.81

15304 98 F 15.75 7.50 4.63 8.65 11.25 8 0.88

1533 105 M 16.00 9.75 7.50 9.44 11.25 10 0.81

1534 60 C 16.00 8.66 8.28 7.13 8.75 6 0.81

1535 100 M 16.00 10.75 8.50 9.44 11.25 10 0.81

1536 100 M 16.00 10.44 8.00 9.44 11.25 10 0.81

1540 100 M 16.00 10.25 6.50 9.38 11.25 10 0.81

15406 40 E 16.00 3.63 2.78 5.13 6.50 6 0.53

15424 60 C 16.00 8.72 2.50 7.13 8.75 6 0.81

15441 68 F 16.00 7.06 4.38 6.28 8.75 6 1.03 3 mtg holes .531

15464 65 K 16.00 5.53 3.72 7.50 9.00 5 0.53

15494 115 Q 16.14 10.66 6.88 11.74 13.19 5&10 5 holes .955 * 10 holes .910

15495 118 Q 16.14 11.00 7.56 11.74 13.19 5&10 5 holes .955 * 10 holes .910

1551 105 D 16.14 9.88 7.55 8.58 11.25 8 0.90

15522 80 F 16.00 8.81 5.44 8.00 10.00 4&8 4 holes .531 * 8 holes .781

15523 50 E 16.00 4.88 4.35 9.50 11.25 10 0.78


15569 105 C 16.25 10.00 7.50 11.63 13.19 10 0.92

15573 135 H 16.25 12.63 10.50 11.62 13.19 10 0.92

1559 85 D 16.00 8.75 6.50 9.88 11.25 10 0.81

1563 95 M 16.00 9.75 7.50 9.88 11.25 10 0.81

1564 90 M 16.00 9.13 6.13 9.75 11.25 10 0.81

15725 65 K 16.25 5.75 3.50 6.25 8.00 5 0.52

15735 60 C 16.00 8.66 3.00 7.13 8.75 6 0.81

1575 80 D 15.75 8.80 6.60 8.53 11.25 10 0.81

15789 121 E 15.50 10.13 8.38 11.06 13.19 10 1.03

15790 121 E 15.50 10.69 8.38 11.06 13.19 10 1.03

15802 100 H 15.50 8.31 6.44 8.69 11.25 10 0.91 3 mtg holes .531 * 13X1/2 tapped

15806 100 D 16.00 10.00 8.75 8.08 11.25 8 0.89

15807 70 D 16.00 7.28 5.69 9.06 11.25 8 0.89

15817 100 H 16.00 9.50 8.25 8.07 11.25 10 0.89

15818 114 H 16.00 10.00 8.75 8.07 11.25 8 0.89

15819 94 H 16.00 9.63 7.25 8.65 11.25 10 0.89

1583 85 F 16.00 8.25 6.00 9.38 11.25 10 0.81

15907 110 D 16.00 10.78 8.88 8.08 11.25 8 0.89

15908 120 T 15.50 8.31 6.50 11.06 13.19 10 1.03 Outboard pilot 15.230

15974 75 F 16.00 9.78 5.94 6.44 8.75 3&6 3 holes .688 * 6 holes 1.250

15975 75 F 16.00 10.28 6.44 6.44 8.75 3&6 3 holes .688 * 6 holes 1.250

15989 110 F 16.25 8.81 4.44 9.00 11.25 10 1.28 3 mtg holes .531

1600 90 H 17.50 9.00 7.70 6.28 8.75 6 1.03 Outboard pilot 11.250

1601 95 Q 16.50 9.00 6.41 9.44 11.25 10 0.81


16026 105 D 16.50 7.81 5.38 9.00 11.25 10 1.31

16027 100 H 16.50 8.97 6.44 8.53 11.25 10 1.31 5 mtg holes .562


16035 128 Q 16.50 9.22 5.50 8.53 11.25 10 1.31

16036 90 E 16.50 8.75 7.50 9.44 13.19 10 1.03 Spot face 10 holes 1.870


11


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes



16045 132 H 16.50 11.44 8.50 8.78 11.25 10 0.81

16048 181 H 16.50 11.56 9.44 11.11 13.19 10 1.06

16049 145 H 16.50 11.25 9.13 9.00 11.25 10 1.31 9.805 G.S.

1605 65 E 16.50 6.03 5.06 11.00 12.50 5 0.66

16051 181 H 16.50 11.56 9.44 11.25 13.19 10 1.06

16052 71 E 16.50 7.00 6.56 13.88 14.88 10 0.47

16054 95 l 16.50 8.75 7.50 11.00 12.50 12 0.66 Step hub pilot 11.250

16057 100 H 16.50 9.78 6.87 9.00 11.25 10 1.31

1606 135 H 16.50 9.88 6.50 9.00 11.25 10 1.31 Notched for sensor

16062 118 H 16.50 9.75 6.50 8.53 11.25 10 1.31 Outboard pilot 13.250

16063 115 H 16.50 9.88 6.81 9.00 11.25 10 1.31

16065 127 H 16.50 9.19 5.44 9.00 11.25 10 1.31 5 mtg holes .562


16071 165 H 16.50 13.19 10.50 8.78 11.25 10 0.94

16073 144 H 16.50 11.25 9.13 8.53 11.25 10 0.81

16075 125 H 16.50 9.15 5.87 9.00 11.25 10 1.31


16108 95 M 16.50 10.69 7.88 11.38 13.19 10 0.81

1611 85 R 16.50 8.00 5.75 6.25 8.00 5 0.81

16111 100 D 16.50 8.75 6.88 9.75 11.25 5 0.66 Notched for sensor

16112 100 D 16.50 8.75 6.87 9.75 11.25 10 0.81 Notched for sensor

1612 85 R 16.50 8.00 5.75 6.25 8.75 6 0.81

16121 96 I 16.50 8.13 5.50 9.44 11.25 10 0.81

16123 105 H 16.50 10.38 7.44 9.00 11.25 10 0.81

16126 110 H 16.50 10.25 7.50 11.06 13.18 10 1.03

16128 70 E 16.50 5.65 4.75 11.25 12.75 5 0.65

16129 85 I 16.50 8.63 7.50 11.00 12.50 5 0.66

1613 85 Q 16.50 8.00 5.75 6.25 11.25 10 0.81

16131 95 I 16.50 8.63 7.38 8.66 11.25 10 0.81

16132 85 I 16.50 8.13 6.75 11.00 12.50 5&6 0.78

16134 90 Q 16.50 8.25 5.63 9.44 11.25 10 0.81

16135 80 G 16.50 7.75 6.81 11.25 12.75 5 0.66 Step hub pilot 14.250

16136 85 H 16.50 8.19 5.06 8.75 11.25 10 1.03 5 mtg holes .562

16137 90 H 16.50 8.31 5.56 9.44 11.25 10 1.25 5 mtg holes .562

16138 123 Q 16.50 9.52 6.27 8.78 11.25 10 0.94

16139 93 G 16.50 8.25 7.38 11.25 12.75 5&6 0.66 Step hub pilot 14.250

1614 85 Q 16.50 8.00 5.75 7.13 11.25 10 0.81

16141 100 H 16.50 10.63 7.63 9.00 10.81 8 0.94

16142 101 H 16.50 9.06 6.38 8.75 11.25 10 0.81 5 mtg holes .562



16145 105 H 16.50 10.30 7.30 8.78 11.25 10 0.94

16146 115 H 16.50 10.81 8.25 8.78 11.25 10 0.81 Outboard pilot 13.190

16149 102 I 16.50 8.50 7.50 11.00 12.50 5&6 0.66

1615 65 E 16.50 6.09 5.44 9.44 11.00 6 0.66

16151 65 E 16.50 6.12 5.41 9.25 11.25 5&6 0.78

16155 92 E 16.50 9.19 6.56 9.00 11.25 10 1.25

1616 85 H 16.50 8.06 5.50 8.66 11.25 10 1.25 5 mtg holes .562

16163 105 H 16.50 10.60 7.80 9.00 11.25 10 0.81

16164 80 H 16.50 7.75 5.00 8.69 11.25 10 1.03 5 mtg holes .562

16165 118 H 16.50 9.38 6.44 8.75 11.25 10 1.28


16169 105 H 16.50 10.60 7.80 8.78 11.25 10 0.81

1617 90 Q 16.50 9.06 6.75 6.25 11.25 10 0.81

16171 92 H 16.50 9.04 6.10 8.78 11.25 10 1.25

16172 90 H 16.50 9.06 5.56 9.44 11.25 10 1.25 5 mtg holes .562

16175 90 H 16.50 9.00 6.44 9.44 11.25 10 1.25 5 mtg holes .562

16179 115 H 16.50 9.84 6.38 8.78 11.25 10 0.94

1618 90 Q 16.50 9.06 6.75 7.13 11.25 10 0.81

12


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


16189 90 Q 16.50 9.19 6.44 9.44 11.25 10 0.81

16196 90 D 16.50 9.50 6.75 11.00 12.50 5&6 0.66 Spot face holes 1.380

1620 65 B 16.50 6.19 5.69 11.00 12.75 6 0.66

16209 90 B 16.50 6.50 5.75 10.50 12.00 10 0.78 Step hub pilot 10.250

1621 90 R 16.50 9.06 6.63 6.25 8.75 6 0.81

1622 90 Q 16.50 9.06 6.75 8.66 11.25 10 0.81

16224 95 D 16.50 10.06 7.84 11.00 12.50 6 0.66 Spot face 6 holes 1.380

16225 107 D 16.50 10.06 7.63 8.78 11.25 10 0.81

16231 100 I 16.50 9.50 8.25 11.11 13.19 10 1.06 Spot face 10 holes 1.870

16232 100 H 16.50 10.50 7.63 9.44 11.25 10 1.25 5 mtg holes .562


16238 90 M 16.50 11.19 8.13 8.69 11.50 10 1.19

16240 138 Q 16.50 11.08 8.14 8.74 11.25 10 0.81

16247 90 S 16.46 8.90 5.92 11.62 13.21 10 0.91

16248 97 L 16.50 8.69 5.44 10.94 13.19 10 1.25 Spot face 10 holes 1.870

1625 85 E 16.50 8.13 7.50 9.00 11.25 10 0.81

16251 80 I 16.50 8.50 7.50 9.00 11.25 10 0.81

16252 75 E 16.50 7.38 6.56 11.25 12.75 5&6 0.66

16253 90 Q 16.50 8.75 5.88 9.38 11.25 10 0.81

16259 90 I 16.50 8.88 7.50 11.00 12.50 6 0.66

1626 95 D 16.50 9.50 7.56 7.13 11.25 10 0.81

16261 95 D 16.50 9.50 7.56 7.13 11.25 10 0.94

16262 65 O 16.50 4.47 4.50 7.50 9.00 5 0.53

16263 70 O 16.50 5.44 5.31 7.50 9.00 5 0.53

16264 80 O 16.50 5.88 6.44 7.50 9.00 5 0.53

16265 75 E 16.50 7.22 6.50 11.00 12.50 5&6 0.66


16268 132 H 16.50 11.50 8.60 8.78 11.25 10 0.94

16269 127 H 16.50 11.50 8.60 8.53 11.25 10 0.94

16271 95 D 16.50 9.50 7.63 8.69 11.25 10 0.81

16275 110 S 16.46 10.19 6.75 11.62 13.21 10 0.91

16281 105 D 16.50 9.50 7.50 9.44 11.25 10 1.06


16284 95 D 16.50 9.50 7.56 9.44 11.00 6 0.66

16289 89 I 16.50 6.40 5.34 10.00 12.75 6 0.81

1629 105 D 16.50 9.50 7.50 9.44 11.25 10 0.81

16291 95 D 16.50 9.50 7.63 9.38 11.25 10 0.81 10 X .125 G.S.

16292 95 D 16.50 9.50 7.57 9.44 11.25 10 0.81

16295 115 I 16.50 10.75 9.25 9.44 11.25 10 0.81

16296 130 D 16.50 11.25 9.06 9.44 11.25 10 0.81

16297 115 I 16.50 11.75 10.19 9.44 11.25 10 0.81

16299 77 D 16.50 7.89 5.65 9.44 11.25 10 0.81

1630 90 E 16.50 8.25 7.56 9.44 11.25 10 1.06

1631 90 E 16.50 8.25 7.56 9.44 11.25 10 0.81

16311 95 E 16.50 8.50 7.81 9.44 11.25 10 0.81

1632 95 I 16.50 8.75 7.50 9.00 11.25 10 0.81

16321 95 I 16.50 8.75 7.50 9.00 11.25 10 1.06

16322 95 I 16.50 9.25 8.00 9.00 11.25 10 0.81

16324 85 I 16.50 8.25 7.00 11.25 12.75 6 0.66

16325 90 I 16.50 8.75 7.50 11.25 12.75 5&6 0.78

16326 90 I 16.50 8.75 7.50 11.25 12.75 6 0.66

1634 95 I 16.50 8.75 7.50 9.00 13.19 10 1.06

16341 95 I 16.50 8.75 7.25 9.75 13.19 10 1.06

16343 65 B 16.50 5.06 4.44 9.50 11.25 6 0.53



16352 91 H 16.50 8.10 5.48 8.69 11.25 10 1.09


16362 110 F 16.50 11.75 6.75 9.44 11.25 10 1.25 5 mtg holes .562

16366 113 U 16.50 9.44 6.55 11.25 13.19 10 0.94

13


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


16367 90 H 16.50 8.63 5.63 8.78 11.25 10 1.25 Outboard pilot 13.38

16368 100 H 16.50 10.19 7.44 9.44 11.25 10 0.81

1636A 100 H 16.50 10.19 7.44 9.44 11.25 10 1.31 5 mtg holes .562 * O.B. pilot 13.000

1636C 100 H 16.50 10.19 7.44 8.66 11.25 10 1.31 5 mtg holes .562 * O.B. pilot 13.000

1636D 100 H 16.50 10.19 7.44 8.66 11.25 10 1.31 5 mtg holes .562 * O.B. pilot 12.750

1637 95 H 16.50 10.13 7.50 9.00 11.25 10 0.81 3 mtg holes .562

16371 108 H 16.50 10.88 7.75 9.00 11.25 10 1.25 3 mtg holes .562

16374 100 H 16.50 10.88 7.75 9.00 11.25 10 1.03 3 mtg holes .562

1638 95 I 16.50 8.13 6.88 9.00 11.25 10 0.81

16384 90 E 16.50 8.13 7.50 11.25 12.75 5 0.66

16385 85 G 16.50 8.25 7.38 11.25 12.75 5 0.66 Step hub pilot 14.250

1639 108 I 16.50 8.75 7.50 9.50 11.25 10 0.81

16391 95 E 16.50 8.19 7.25 9.50 11.25 10 0.81

16392 90 D 16.50 8.25 6.56 9.50 11.25 10 0.81

16396 111 I 16.50 9.00 7.63 9.50 11.25 10 0.81 Notched for sensor

1640 105 I 16.50 8.75 7.50 9.50 11.25 5&6 5 holes .81 * 6 holes .66 * Notched

16401 85 D 16.50 8.25 6.56 9.50 11.25 6 0.66

16402 110 I 16.50 9.00 7.63 9.50 11.25 5&6 0.78 Notched for sensor

16406 90 I 16.50 9.00 7.50 11.00 12.50 5 0.66

16408 90 I 16.50 9.00 7.56 11.25 12.75 5 0.78

16409 90 I 16.50 9.00 7.50 11.25 12.75 6 0.66

16415 86 I 16.50 9.53 8.34 11.25 12.75 5&6 0.66

16417 95 D 16.50 9.53 7.75 11.25 12.75 5 0.66 Spot face 5 holes 1.780

1642 87 I 16.50 8.00 6.48 9.38 11.25 10 0.81

16421 105 I 16.50 10.13 9.13 9.50 11.25 10 0.81

16422 105 I 16.50 9.94 9.06 9.44 11.00 5 0.78

16423 105 I 16.50 9.94 9.06 9.44 11.00 6 0.66

16436 87 P 16.50 8.31 6.25 7.50 8.75 6 0.81

1644 85 P 16.50 7.13 5.00 7.13 8.75 6 0.81

16444 91 H 16.50 8.20 5.50 7.13 8.75 6 0.81 Outboard pilot 11.250

16452 100 H 16.50 7.88 5.25 8.69 11.25 10 1.31 5 mtg holes .562

1649 80 I 16.50 7.50 6.00 9.38 11.25 10 0.81

16516 93 G 16.50 8.25 7.38 11.25 12.75 5 0.75 Step hub pilot 14.250

1652 90 D 16.50 9.13 6.50 9.38 11.25 10 0.81 10 X .125 G.S.

16521 90 Q 16.50 9.88 6.75 9.38 11.25 10 0.81 10 X .125 G.S.

16523 75 I 16.50 7.38 6.13 9.38 11.25 10 0.81 10 X .125 G.S.

1653 70 E 16.50 6.69 6.13 11.25 12.75 6 0.66

16541 129 M 16.54 11.81 9.63 11.42 13.81 10 0.91 Spot face 10 holes 1.625

16543 99 D 16.50 9.19 7.56 9.50 11.50 6 0.66

16549 90 H 16.50 9.59 6.69 8.78 11.25 10 0.94

1657 70 I 16.50 6.88 5.75 11.25 12.75 5&6 0.66

16573 90 F 16.50 9.04 6.36 8.78 11.25 10 1.25 Outboard pilot 13.38

1658 70 E 16.50 6.94 6.00 11.00 12.50 5&6 0.66

16595 80 H 16.50 8.02 5.31 8.78 11.25 10 1.28 Outboard pilot 13.38

16615 115 H 16.50 9.31 6.31 8.65 11.25 10 0.91 2 holes M12 X 1.5 tapped

16618 95 I 16.50 8.92 7.50 9.38 11.25 10 0.81

16624 106 D 16.54 10.93 8.38 11.42 13.19 10 0.91 Spot face 10 holes 1.620

1664 95 Q 16.50 9.06 6.75 9.44 11.25 10 0.81

16647 118 H 16.50 11.19 8.62 8.78 11.25 10 0.94 Outboard pilot 13.19

1665 75 G 16.50 7.06 6.13 11.25 12.75 5 0.66 Step hub pilot 14.250

1666 90 I 16.50 9.25 7.88 9.44 11.25 10 0.81

16663 71 E 16.50 5.75 5.31 11.00 12.75 6 0.66

16664 82 N 16.50 7.72 4.69 6.28 8.75 6 1.03 3 mtg holes .530

1667 75 E 16.50 7.06 6.44 11.50 12.75 5&6 0.66

16676 90 I 16.50 7.87 6.62 11.00 12.50 12 0.63 Step hub pilot 11.250

16677 87 H 16.50 9.19 6.25 8.78 11.25 10 1.28 Outboard pilot 13.50

16687 92 H 16.50 9.74 6.80 8.78 11.25 10 1.25

1670 95 A 16.50 9.50 7.63 9.44 13.19 10 1.06 Spot face 10 holes 1.870

16701 94 A 16.50 9.50 7.63 11.26 13.19 10 1.06

16701 100 A 16.50 9.50 7.63 11.26 13.19 10 1.06

14


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


1671 96 K 16.50 9.50 7.63 7.13 10.00 8 0.81 Spot face 8 holes 1.870

16717 115 I 16.50 12.00 10.56 9.44 11.25 10 0.81

16719 120 I 16.50 12.00 10.56 9.44 13.19 10 1.06 Spot face 10 holes 1.870

1672 75 G 16.50 7.31 6.38 11.25 12.75 5&6 0.66 Step hub pilot 14.250

16727 105 I 16.50 8.75 7.50 11.00 12.50 5 0.66

16728 107 Q 16.50 8.81 7.44 11.25 12.75 5&6 0.66

16729 105 H 16.50 10.63 7.63 9.44 11.25 10 0.81

1673 75 D 16.50 7.25 5.63 9.44 11.25 10 0.81

16739 85 H 16.50 8.81 5.87 8.53 11.25 10 1.25 Outboard pilot 13.38

1676 105 I 16.50 8.75 7.50 9.44 11.00 5 6 holes .656 * 5 holes .781

16771 105 H 16.50 10.63 7.63 8.53 11.25 10 0.81

16778 99 I 16.50 8.50 7.38 11.25 12.75 5&6 0.78

16779 105 I 16.50 8.13 7.31 11.25 12.75 5&6 0.78

1679 95 Q 16.50 9.06 6.75 9.87 11.25 10 0.81

16791 100 I 16.50 8.50 7.44 8.66 11.25 10 0.81

16792 110 H 16.50 10.54 7.50 8.78 11.25 10 0.94

16793 110 H 16.50 10.38 7.44 8.78 11.25 10 0.94

16794 110 H 16.50 10.63 7.63 9.00 11.25 10 0.81

16795 110 H 16.50 10.63 7.63 8.53 11.25 10 0.81


16797 105 H 16.50 10.38 7.70 8.53 11.25 10 0.81

16798 105 H 16.50 10.44 7.50 9.00 11.25 10 0.81

16811 165 H 16.50 12.13 9.36 8.53 11.25 10 0.81

16814 132 H 16.50 12.39 9.63 8.78 11.25 10 0.94

1682 105 D 16.50 9.50 7.56 9.88 11.25 10 0.81

16827 130 H 16.50 11.47 8.94 8.78 11.25 10 0.94 10 Weight Pockets

1684 90 I 16.50 8.88 7.50 9.88 11.25 10 0.81

1685 95 I 16.50 8.75 7.50 9.44 11.25 10 0.81

16854 128 H 16.50 11.46 8.97 8.78 11.25 10 0.94

16857 105 H 16.50 10.25 7.43 9.38 11.25 10 0.81

16865 70 I 16.50 6.88 5.75 11.25 12.75 6 0.53

16867 70 I 16.50 7.06 5.63 11.25 12.75 6 0.53

16868 85 I 16.50 7.50 6.31 11.25 12.75 5&6 0.66

16869 80 I 16.50 7.81 6.75 11.25 12.75 5 0.66

1687 75 E 16.50 7.44 6.50 9.44 11.00 6 0.66

16871 80 E 16.50 7.81 7.00 9.44 11.00 5&6 0.66

16872 80 E 16.50 7.81 7.00 9.44 11.00 5 0.78

16874 99 E 16.50 8.25 7.19 9.44 11.00 5&6 5 hole .781 * 6 hole .656

16876 85 E 16.50 8.25 7.44 11.25 12.75 5 0.65

16877 95 A 16.50 8.44 7.37 11.25 12.75 5&6 0.78

16878 85 I 16.50 8.44 7.50 11.00 12.50 6 0.78

16879 91 E 16.50 8.31 7.61 13.50 15.00 10 0.53

1688 85 E 16.50 8.13 7.44 9.38 11.25 10 0.81

16881 90 D 16.50 8.75 6.56 9.38 11.25 10 0.81

16884 80 E 16.50 7.56 6.75 11.25 12.75 5&6 0.65

16886 85 E 16.50 8.00 7.38 11.25 12.75 6 0.65

16887 85 E 16.50 8.00 7.44 10.25 11.25 6 0.78

16888 85 E 16.50 8.00 7.44 10.25 11.25 10 0.81

16889 85 E 16.50 8.00 7.44 10.25 12.75 6 0.78

1689 97 I 16.50 8.31 6.62 8.69 11.25 10 0.81

16894 100 I 16.50 8.44 7.50 11.25 12.75 5 0.65

16895 70 I 16.50 7.06 5.56 9.44 11.25 10 0.81

16896 80 I 16.50 7.56 6.50 11.00 12.50 5&6 0.65

1690 75 E 16.50 7.13 6.44 11.00 12.75 6 0.65

16901 85 I 16.50 8.00 6.75 11.00 12.50 5&6 0.65

16902 80 H 16.50 8.09 5.44 8.66 11.25 10 0.81

16903 80 H 16.50 8.09 5.44 8.66 11.25 10 1.06

16907 85 E 16.50 8.13 7.56 11.00 12.75 6 0.65

1691 85 I 16.50 7.56 6.31 8.66 11.25 10 0.81

16911 90 D 16.50 8.62 6.50 8.66 11.25 10 0.81

15


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


16912 90 Q 16.50 8.62 6.50 9.38 11.25 10 0.81

16913 105 I 16.50 9.25 7.50 11.00 12.50 12 0.65

16917 92 I 16.50 8.63 7.44 8.66 11.25 10 0.81

1692 90 I 16.50 9.06 7.75 9.50 11.25 10 0.81

16921 105 H 16.50 10.44 7.50 8.66 11.25 10 1.31

16922 105 H 16.50 10.44 7.50 8.66 11.25 10 0.81 Outboard pilot 13.38

16923 105 H 16.50 10.44 7.50 8.75 11.25 10 0.81 Outboard pilot 13.38

16927 115 I 16.50 8.63 7.43 8.66 11.25 10 1.00

1693 90 I 16.50 8.87 7.62 11.00 12.75 6 0.65

16931 90 D 16.50 8.75 6.63 9.50 11.50 6 0.65

16937 65 I 16.50 6.50 5.44 11.00 12.50 6 0.65

16941 90 H 16.50 8.81 6.00 8.75 11.25 10 0.81 5 mtg holes .562

16946 119 E 16.50 10.00 9.00 9.44 11.00 5&6 5 holes .781 * 6 holes .656

1695 108 D 16.50 10.13 7.56 9.44 11.25 10 0.81

1696 85 I 16.50 8.00 6.50 10.25 11.25 10 0.81

16961 105 D 16.50 8.44 6.50 10.88 12.50 12 0.66 Step hub pilot 11.250

1697 100 M 16.50 10.44 8.00 9.44 11.25 10 0.81

16975 112 I 16.50 10.31 9.13 9.44 11.25 10 0.81

16979 95 I 16.50 8.00 6.50 10.88 12.75 24 0.65 Step hub pilot 11.250

1698 110 F 16.50 12.75 7.75 9.25 11.25 10 0.81

16981 100 F 16.50 12.63 7.50 9.44 11.25 10 1.25 5 mtg holes .562

16982 110 F 16.50 12.75 7.75 9.44 11.25 10 1.06 Outboard pilot 13.25

16988 95 H 16.50 8.56 5.44 8.66 11.25 10 1.31

16991 120 D 16.50 12.44 10.50 9.44 11.25 10 0.81

16992 100 I 16.50 7.43 6.40 11.25 12.75 6 0.78

16993 100 M 16.50 7.63 6.59 11.25 12.75 6 0.78

16997 107 I 16.50 8.75 7.50 10.50 12.75 5&6 0.78 Exciter pattern J

16999 110 H 16.50 10.81 7.50 8.78 11.25 10 0.81

1700 100 C 17.00 11.50 6.30 6.75 8.75 6 0.81

1701 100 C 17.00 11.50 6.75 9.75 11.25 10 0.81

1702 125 C 17.00 11.50 6.54 9.75 11.25 10 0.81 Step brake face 4.25

1706 125 C 17.00 11.50 6.54 9.44 11.25 10 0.81 Step brake face 4.25

17076 90 H 17.00 8.31 6.81 9.00 11.25 10 0.94 5 mtg holes

1708 100 M 17.25 9.75 7.25 9.44 11.25 10 0.81

1711 125 A 17.25 10.88 8.88 9.44 13.19 10 0.81

17111 125 A 17.25 10.88 8.88 9.44 13.19 10 1.06

1712 136 A 17.25 10.88 8.88 9.44 11.25 10 0.81

1713 125 A 17.25 10.88 8.88 9.44 11.25 10 1.06

1714 125 A 17.25 10.88 8.88 10.63 13.19 10 1.06

1717 110 S 17.25 6.38 4.63 9.44 10.63 10 0.53

17196 100 I 17.25 9.68 7.63 11.00 13.19 10 1.03

1720 100 P 17.00 5.81 4.66 10.00 12.00 8 0.64

17212 95 D 17.25 9.81 6.50 7.13 11.25 10 0.81

17226 85 A 17.25 7.44 5.56 11.00 13.25 12 0.78

17232 75 B 17.25 6.00 5.31 11.00 12.75 6 0.66

17235 105 I 17.00 13.00 7.63 10.50 13.19 10 1.25 5 mtg holes

17250 85 U 17.25 7.13 4.50 8.76 11.25 10 0.81

17295 70 I 17.25 5.75 4.44 10.50 12.00 10 0.78

17378 70 B 17.25 5.71 4.75 13.86 15.13 8 0.78

17379 65 B 17.25 5.44 4.25 11.27 13.00 8 0.78

17489 55 E 17.00 5.00 4.31 10.50 12.00 10 0.78

1759 95 A 17.25 8.81 6.94 11.00 13.25 12 0.66

17598 85 U 17.00 7.13 4.50 8.76 11.25 10 0.81

1761 85 Q 17.25 8.88 6.19 9.44 11.25 10 0.81

17645 95 A 17.25 8.56 6.56 11.00 13.19 10 1.03

1771 110 E 17.00 7.44 6.44 8.66 11.25 10 1.28

1775 65 E 17.25 5.09 4.44 9.88 11.63 10 0.66

17789 80 U 17.25 6.81 4.62 11.25 12.50 24 0.78

1780 100 Q 17.25 10.00 6.34 9.44 11.25 10 0.81

1786 68 P 17.25 5.63 4.44 9.00 11.25 10 1.13

16


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


17861 80 H 17.25 6.81 4.88 8.75 11.25 10 0.81

1787 65 I 17.25 6.69 5.44 11.00 12.75 6 0.66

1788 80 B 17.25 7.38 6.50 11.00 12.75 6 0.66

1800 140 I 18.00 8.75 7.50 9.50 11.25 10 0.81

18006 140 I 18.00 8.75 7.50 9.50 11.25 6 0.66

18018 120 I 18.00 9.75 7.88 11.11 13.19 10 1.09

1804 140 I 18.00 8.75 7.50 9.00 11.25 10 0.81

1805 140 I 18.00 8.75 7.50 9.00 11.25 10 1.06

1806 140 I 18.00 8.75 7.50 9.00 13.19 10 0.81

1807 140 I 18.00 8.75 7.50 9.00 13.19 10 1.06 Spot face 10 holes 1.870

1808 140 D 18.00 9.75 7.88 9.44 11.25 10 0.81

1809 140 D 18.00 9.75 7.88 9.44 11.25 10 1.06

1810 140 D 18.00 9.75 7.88 9.44 13.19 10 0.81

1811 124 D 18.00 9.75 7.88 9.44 13.19 10 1.06

1813 150 D 18.00 9.50 7.50 9.44 11.25 10 0.81

1814 140 I 18.00 10.00 8.50 9.44 11.25 10 0.81

18141 140 I 18.00 10.00 8.50 9.44 11.25 6 0.81

18142 140 I 18.00 10.00 8.50 9.44 13.19 10 1.06

18143 140 I 18.00 10.00 8.50 9.44 11.25 10 1.06

18171 140 I 18.00 8.75 7.50 11.25 12.75 6 0.66

18172 140 I 18.00 9.25 8.00 11.25 12.75 6 0.66

18173 140 I 18.00 9.25 8.00 11.25 12.00 5 0.78

18174 140 I 18.00 8.88 7.56 11.25 12.75 6 0.78

18175 140 I 18.00 8.50 7.41 11.25 12.75 6 0.78 Exciter hole pattern E

1818 140 I 18.00 9.50 8.25 9.44 11.25 10 0.81

1820 140 I 18.00 10.88 9.63 9.44 13.19 10 1.06

1821 155 Q 18.00 12.63 7.75 9.00 13.19 10 1.06 10 X .125 G.S.

1822 155 H 18.00 11.94 7.63 10.94 13.19 10 1.44 5 mtg holes .562

18266 135 E 18.00 8.20 7.45 11.25 12.75 6 0.78

18314 175 Q 18.00 10.38 7.63 10.50 13.19 10 1.19

1841 140 D 18.00 9.50 7.38 11.11 13.19 10 1.06

18441 140 I 18.00 8.75 7.50 10.63 13.25 12 0.66 Step hub pilot 11.001

1850 140 D 18.00 9.75 7.63 9.88 11.25 10 0.81

18685 140 P 18.00 8.72 7.44 8.66 11.25 10 0.81

18788 138 E 18.00 8.25 7.63 11.00 12.75 6 0.66

19702 160 K 19.69 7.29 5.88 11.03 13.19 10 1.03 2 holes M16 X 2

19936 140 E 19.69 7.69 6.94 9.50 11.25 10 0.78

2000 185 L 20.00 10.25 8.75 9.44 11.25 10 0.81

2001 185 L 20.00 10.25 8.75 9.44 11.25 10 1.06

2002 185 L 20.00 10.25 8.75 9.44 13.19 10 0.81

2003 200 L 20.00 10.25 8.75 9.44 13.19 10 1.06

20031 200 S 20.00 13.00 10.50 9.44 13.19 10 1.06

20032 200 S 20.00 13.00 10.50 9.44 13.19 10 0.81

20033 232 S 20.00 12.50 9.13 9.44 13.19 10 1.06

2005 232 S 20.00 12.50 8.50 10.63 13.19 10 1.06

20051 223 A 20.00 13.00 10.50 10.63 13.19 10 1.06

20053 237 S 20.00 12.50 8.50 10.63 13.19 6 1.03

20056 205 S 20.00 12.63 8.63 9.44 13.19 10 1.06

20057 236 S 20.00 12.63 8.63 11.00 13.19 10 1.06

20058 205 S 20.00 12.50 8.25 9.00 13.19 10 1.06

2009 200 L 20.00 10.25 8.75 10.63 13.19 6 0.81

20091 200 S 20.00 13.00 10.50 10.63 13.19 6 0.81

2011 200 L 20.00 10.25 8.75 9.50 11.25 10 0.81

2012 185 L 20.00 10.25 8.75 9.50 11.25 10 1.06

2013 185 L 20.00 10.25 8.75 9.50 13.19 10 0.81

2014 220 E 20.00 11.75 9.00 14.00 16.00 10 0.81 Additional flange

2016 200 M 20.00 10.75 8.50 11.25 12.75 5 0.78

2019 154 L 20.00 10.25 8.75 9.50 13.19 10 1.06

2020 225 L 20.00 11.38 8.20 11.00 12.50 12 0.66 Step hub pilot 11.250

20201 200 L 20.00 10.50 8.75 12.13 15.00 12 1.06

17


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Brake

Face

Dia.

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


2021 210 L 20.00 9.25 7.75 13.25 15.00 12 0.78 Step hub pilot 13.500

2022 203 L 20.00 9.25 7.50 11.00 12.50 12 0.66 Step hub pilot 11.250

2023 240 L 20.00 10.94 8.61 13.25 15.00 12 0.78 Step hub pilot 13.500

2023 240 L 20.00 10.94 8.61 13.25 15.00 12 0.94 Step hub pilot 13.500

20231 202 L 20.00 10.94 8.61 13.25 15.00 24 0.94 Step hub pilot 13.500

2025 190 H 20.25 11.50 7.69 10.94 13.19 10 1.44 5 mtg holes .562

2026 220 A 20.00 13.25 6.50 12.75 15.00 12 0.78

2027 221 L 20.00 10.94 8.61 11.00 12.50 12 0.66 Step hub pilot 11.250

2028 160 I 20.00 7.50 6.50 13.75 15.25 6 0.78

2029 160 D 20.00 8.13 6.50 9.00 14.50 6 0.78

2034 205 L 20.00 10.22 8.50 11.00 12.50 6 0.78

2035 190 A 20.00 11.25 9.00 9.50 11.25 6 0.66

20351 190 A 20.00 11.25 9.00 9.50 11.25 6 0.75

20353 130 B 20.00 7.68 6.00 12.75 15.00 12 0.75

20354 150 B 20.00 8.68 7.00 12.75 15.00 12 0.75

2036 163 B 20.25 9.00 8.06 12.75 14.88 12 0.91 Step hub pilot 13.250

20461 130 B 20.25 7.25 5.00 17.25 18.38 16 0.66

20462 140 B 20.25 7.94 5.88 16.38 18.38 32 0.66

2055 350 S 20.25 14.50 12.00 12.63 15.00 8 1.13 Spot face 8 holes 2.250

2057 236 A 20.25 10.31 7.88 12.75 15.00 8 0.78

20619 120 E 20.25 6.57 5.63 12.75 14.50 6 0.78

20622 170 B 20.25 9.00 8.06 10.63 13.25 12 0.81 Step hub pilot 11.000

2077 160 T 20.00 7.50 5.44 7.75 9.50 6 0.88

20790 180 B 20.00 10.13 8.63 11.75 14.00 14 1.03

20805 150 A 20.00 8.25 5.50 11.00 12.50 12 0.66 Step hub pilot 11.250

20832 250 S 20.00 11.00 8.38 13.25 15.00 24 0.78

2201 270 B 22.00 9.63 8.13 13.25 15.00 12 0.78

2400 500 M 24.00 14.19 11.69 16.00 18.00 12 0.78 Step hub pilot 16.500

2603 380 E 26.00 12.31 11.25 19.50 21.00 10 0.88

26232 350 B 26.00 10.38 8.94 16.50 18.00 24 0.91

2626 450 L 26.00 13.38 11.00 19.00 22.00 12 1.03

26491 380 P 26.00 12.00 8.50 16.50 18.00 24 0.87

26603 380 E 26.00 12.31 11.25 19.50 21.00 16 0.91

26608 350 E 26.00 9.62 9.62 26.00 30.13 45 0.69 Flange on outside of drum

26616 275 E 26.00 7.63 7.63 26.00 29.19 45 0.69 Flange on outside of drum

2675 500 B 26.00 16.06 12.56 17.75 21.00 16 1.50

2685 450 B 26.00 13.00 11.31 17.00 19.50 12 1.06

28400 280 O 23.00 6.25 5.61 10.49 13.50 8 0.66

28401 320 O 23.00 6.13 5.50 10.49 13.50 8 0.66

3000 480 E 30.00 8.38 8.38 30.00 34.00 30 0.66

30100 600 B 30.00 12.38 10.88 21.50 24.50 16 1.03

30101 600 B 30.00 13.75 11.69 17.00 23.50 18 1.03

30730 450 E 30.00 8.63 8.63 30.00 34.00 45 0.69

30851 675 B 30.00 15.00 13.88 21.50 25.00 16 1.16

30852 600 B 30.00 12.38 10.69 21.50 25.00 16 0.91

18

Progressive Size Listing DuraBrake Brake Drums and Rotors

DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


12709 28 B 4.13 3.63 4.75 6.50 8 0.69

12311 50 O 4.75 5.38 6.44 7.25 8 0.38

12960 45 O 4.75 5.38 6.44 7.25 12 0.44

12330 50 B 5.63 5.25 8.25 9.25 8 0.53

1207 60 B 7.75 6.75 7.25 10.00 6 0.66 Spot face 6 holes 1.870

1201 65 A 8.50 6.50 6.25 8.75 6 0.81 Spot face 6 holes 1.870

1202 65 A 8.50 6.50 7.13 8.75 6 0.81 Spot face 6 holes 1.870

1217 65 A 8.50 6.50 6.25 8.00 5 0.81

1203 75 A 9.19 7.19 7.13 8.75 6 0.81 Spot face 6 holes 1.870

1218 75 A 9.19 7.19 7.13 8.75 6 1.06 Spot face 6 holes 1.870

1221 71 A 9.19 7.19 7.25 8.75 6 0.81 Spot face 6 holes 1.870

1220 80 A 10.50 6.75 6.75 8.75 6 0.81 Spot face 6 holes 1.870

12173 28 F 5.00 3.00 6.50 8.00 5 0.89

12127 60 F 7.12 2.50 5.19 6.50 8 0.69

1214 60 B 6.50 5.94 7.25 10.00 6 0.66 Spot face 6 holes 1.870

1208 47 B 6.81 6.25 8.50 10.00 6 0.66 Spot face 6 holes 1.870

12121 60 D 7.13 5.38 7.13 8.75 10 0.81 Spot face 10 holes 1.870

12125 60 D 7.13 5.38 6.25 8.75 10 0.81 Spot face 6 holes 1.870

12126 60 D 7.13 5.38 7.13 8.75 10 0.81 Spot face 6 holes 1.870

1211 60 B 7.44 6.50 8.50 10.00 6 0.66

1216 60 B 7.44 6.50 6.75 8.75 6 0.66

1213 65 A 7.50 5.63 6.25 8.75 6 0.81 Spot face 6 holes 1.870

12638 65 L 7.50 6.50 7.50 8.75 6 0.53

12153 60 D 7.63 6.37 7.50 8.75 6 0.81

12172 65 D 8.19 6.20 6.25 8.75 6 0.81 Spot face 6 holes 1.870

12630 70 A 8.59 6.25 7.13 8.75 10 0.81 Spot face 6 holes 1.870

12634 75 A 8.59 6.25 7.13 8.75 6 0.81 Spot face 6 holes 1.870

12506 66 B 8.63 7.81 7.13 8.75 6 0.81

1251 62 B 8.63 7.81 7.13 8.75 10 0.81

12617 75 L 8.88 8.06 8.50 10.00 6 0.66 6 holes .656 * 3 holes .656

1209 62 A 9.00 6.50 6.25 8.75 6 0.81 Spot face 6 holes 1.870

1210 70 A 9.00 6.50 7.13 8.75 6 0.81 Spot face 6 holes 1.870

12101 70 A 9.06 6.63 7.13 8.75 10 0.81 Spot face 10 holes 1.870

12637 73 L 9.06 8.06 7.00 8.25 12 0.66 6 holes .656 * 6 holes .530

12365 78 E 9.13 8.41 7.25 8.75 6 0.81

1226 75 M 9.25 6.75 7.13 8.75 6 0.81 Spot face 6 holes 1.870

1227 75 M 9.25 6.25 7.13 8.75 6 0.94 Spot face 6 holes 1.870

12999 70 A 9.25 6.75 7.13 8.75 10 0.81

12128 70 D 9.50 7.75 6.25 8.75 10 0.81 Spot face 6 holes 1.870

1245 75 A 10.09 7.81 7.13 8.75 10 0.81 Spot face 10 holes 1.870

12635 83 A 10.47 8.12 7.12 8.75 6 0.81

1224 75 A 10.75 8.13 7.13 8.75 6 0.94 Spot face 6 holes 1.870

1241 75 A 10.75 8.13 7.13 8.75 6 0.81 Spot face 6 holes 1.870

12414 75 A 10.75 8.13 7.25 8.75 6 0.81 Spot face 6 holes 1.870

1243 80 A 10.75 8.13 6.25 8.75 6 0.94 Spot face 6 holes 1.870

1244 75 A 10.75 8.13 7.13 8.75 10 0.81 Spot face 10 holes 1.870

12444 75 A 10.75 8.13 7.25 8.75 10 0.81 Spot face 10 holes 1.870

12592 40 Q 5.91 3.56 7.88 9.84 6 0.81

12.00" Diameter

12.13" Diameter

12.25" Diameter

12.41" Diameter

19

DuraBrake Brake Drums and Rotors Progressive Size Listing

DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


12595 50 H 6.44 3.58 6.29 8.75 10 1.03

1297 25 B 3.63 3.33 10.25 11.25 12 0.56

1250 40 M 5.88 3.00 6.75 8.75 6 0.81

12306 38 C 5.81 3.56 5.70 8.00 5 0.75

12055 50 F 7.00 3.69 6.77 8.75 6 0.89

12432 55 U 7.00 3.69 6.77 8.75 6 0.89

12800 53 C 7.28 5.31 6.45 8.75 6 0.88

13111 32 D 4.57 3.47 10.04 11.02 6 0.52 4 holes M12 X 1.25 tapped

13112 39 D 5.35 4.26 10.04 11.02 6 0.52 4 holes M12 X 1.25 tapped

13243 33 D 3.38 2.50 6.13 11.25 10 0.88

13113 38 R 4.25 2.48 3.94 5.50 5 0.63

1313 32 R 4.75 3.00 4.88 6.00 6 0.42

13037 51 C 6.44 3.06 4.59 6.50 8 0.56 2 mtg holes .437

13038 51 C 6.44 3.06 4.59 6.50 8 0.63 2 mtg holes .437

13125 40 C 7.88 3.13 5.19 6.50 8 0.69

13717 36 C 8.70 4.02 5.20 6.50 8 0.69

13303 25 E 3.50 2.59 10.00 11.00 5 0.53

13845 33 D 4.00 3.00 4.61 5.50 6 0.50 5.50-6-.500 * 6-6-.500

1317 48 F 7.00 3.00 7.13 8.75 6 0.81

13906 45 F 7.12 3.00 6.44 8.00 5 0.81

13918 65 F 7.56 2.82 6.44 8.00 5 0.81

1329 65 F 7.59 2.95 7.13 8.75 6 0.81

13632 60 F 8.03 3.42 7.13 8.75 6 0.81

13574 40 H 5.38 2.75 6.25 7.25 6 0.63

13911 30 H 5.94 3.30 6.75 8.00 5 0.91

13174 39 H 6.47 4.06 6.00 8.00 5 0.88

14503 97 U 7.88 4.75 9.44 11.25 10 1.31 5 mtg holes .562 * O.B. pilot 12.750




14525 97 T 8.31 6.06 9.44 11.25 10 1.31 5 mtg holes .562 * Circular ribs





14.50" Diameter

12.41" Diameter (continued)

12.50" Diameter

12.61" Diameter

12.80" Diameter

13.00" Diameter

14.00" Diameter

14.13" Diameter

20


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes



14533 160 H 12.81 10.50 9.44 11.25 10 1.31 5 mtg holes .562 * O.B. pilot 12.750


14523 186 T 12.88 10.50 9.44 11.25 10 1.31 5 mtg holes .562 * Circular ribs



14252 72 T 3.81 3.50 9.44 11.00 5&6 0.53 Step hub pilot 12.001

14394 38 E 3.94 3.38 10.00 11.25 5 0.53

14018 35 E 4.14 3.56 10.00 11.00 5 0.53

14863 80 E 4.19 3.38 7.44 8.75 6 0.94

14072 45 I 4.31 3.56 9.00 10.50 5 0.53

14243 45 I 4.42 3.81 9.00 10.50 5 0.66

14563 49 E 4.50 4.09 9.75 10.88 5 0.59

1416 70 E 4.53 4.00 10.00 11.00 5 0.53

14234 60 D 4.56 3.42 6.13 11.25 10 0.88

14186 46 P 4.69 3.50 6.44 8.00 5 0.66

14446 54 Q 5.00 3.50 6.25 8.00 5 0.53

14126 55 H 5.13 4.25 9.00 11.25 10 0.81

14078 70 A 5.26 4.31 9.50 11.25 6 0.78

1497 51 A 5.31 4.13 10.00 11.25 5 0.53

14278 63 E 5.38 4.78 6.44 8.00 5 0.66

14279 61 B 5.38 4.87 6.44 8.00 5 0.66 6 holes .310-18 UNC-2B tapped

14417 65 P 5.38 4.38 9.25 11.25 5 0.78

14244 62 I 5.42 4.50 9.19 11.25 5 0.66

14245 61 I 5.55 4.50 9.19 11.25 5&6 0.78

14121 65 I 5.56 4.00 7.00 8.00 5 0.52

1408 60 P 5.63 4.13 7.50 9.00 5 0.53

14088 55 F 5.75 3.94 8.75 11.25 10 0.81 3 mtg holes .531

14571 75 D 5.88 4.50 9.25 11.25 5&6 0.78

14572 75 D 5.88 4.50 9.25 11.25 6 0.78

1412 60 G 5.94 5.38 10.63 12.00 5&6 0.66 Outboard pilot 13.250

1417 53 I 6.00 4.94 11.00 12.50 5&6 0.53

1499 55 E 6.03 5.50 9.44 11.00 5&6 0.66

1407 75 D 6.06 4.19 9.00 11.25 10 1.25

14154 52 E 6.06 5.00 9.50 11.25 10 1.25

1476 65 F 6.06 3.50 6.25 8.75 6 0.81

14848 52 Q 6.06 3.93 10.00 11.00 5 0.56

14094 70 A 6.13 4.38 9.50 11.25 6 0.78 Notched for sensor

14913 73 B 6.18 5.49 9.25 11.25 6 0.78

1406 55 E 6.25 5.56 11.25 12.75 5 0.66

1419 56 E 6.25 5.56 11.00 12.50 5&6 5 holes .531 * 6 holes .656

1491 70 R 6.25 5.25 5.13 8.00 5 0.81

14271 66 D 6.41 4.59 6.25 8.75 6 0.81

14104 66 D 6.47 4.44 6.00 8.00 5 0.88

1422 70 I 6.50 5.38 9.50 11.25 10 0.81

1423 70 I 6.50 5.38 9.50 11.25 6 0.66

1443 65 I 6.50 5.50 9.44 11.00 5 0.66

1478 70 F 6.50 4.75 9.38 11.25 10 0.81

14057 55 D 6.53 3.97 9.44 11.25 10 1.31

1413 70 K 6.56 4.56 6.25 8.75 6 0.81

1479 70 P 6.63 4.44 6.75 8.00 5 0.88

14402 64 F 6.69 4.00 7.13 8.75 5 0.81

14101 60 F 6.75 4.00 7.50 9.00 5 0.50

14859 75 P 6.75 5.52 6.25 8.75 6 0.84

15.00" Diameter


21


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


1466 70 I 6.78 5.56 11.25 12.75 5 0.66 Spot face 5 holes 1.380

14285 53 F 6.91 3.47 6.44 8.75 6 0.78

14286 53 F 6.91 3.47 6.44 8.75 10 0.72

14054 72 M 6.94 4.33 8.36 11.25 10 1.31

14236 95 E 7.00 6.37 11.18 13.19 10 1.06 2 mtg holes .515 * 2- M14 X 2

1426 63 F 7.00 5.38 9.38 11.25 10 0.81

1427 75 I 7.00 5.63 11.00 12.50 6 0.66 Spot face 6 holes 1.380

14488 80 Q 7.00 4.50 6.25 8.75 6 0.81

14489 80 Q 7.00 4.50 6.25 8.00 5 0.81

1475 63 F 7.00 5.38 9.38 11.25 10 0.81

14751 63 F 7.00 5.38 9.38 11.25 10 1.19

1460 95 B 7.06 6.37 9.75 11.25 5 0.66

14105 66 H 7.08 4.75 7.19 8.75 10 0.81

14566 69 E 7.16 6.44 9.44 11.00 5&6 0.66

1429 75 L 7.19 6.00 9.75 11.25 6 0.78 Spot face 6 holes 1.380

1430 85 L 7.19 6.00 9.75 11.25 10 0.81

1467 62 H 7.19 4.88 6.28 8.75 6 0.81 3 mtg holes .343

14763 75 F 7.19 4.00 6.44 8.75 6 1.25 3 mtg holes .562

1485 75 E 7.19 6.50 11.25 12.75 5&6 0.66

14441 75 Q 7.22 4.25 9.00 11.25 10 1.28

14717 80 P 7.25 5.38 6.25 8.75 6 0.81

14718 80 P 7.25 5.38 7.13 8.75 6 0.81

14012 100 E 7.31 6.68 11.18 13.19 10 1.06 2 mtg holes .515 * 2- M14 X 2

14415 61 F 7.31 5.50 7.50 8.75 6 0.81

1409 95 B 7.38 6.88 11.25 12.75 5&6 0.66

1418 75 P 7.38 5.25 6.25 8.75 6 0.81

14112 70 D 7.44 5.50 9.44 11.25 10 0.81

14115 70 N 7.44 5.25 9.00 11.25 10 1.25

14463 82 E 7.44 6.38 11.25 12.75 6 0.78

14391 83 E 7.48 6.38 11.25 12.75 6 0.66

1411 75 F 7.50 4.50 6.06 8.75 6 0.81 3 mtg holes .343 * O.B. pilot 11.250

1432 75 I 7.50 6.50 9.50 11.25 10 0.81

1433 80 B 7.50 6.75 9.50 11.25 6 0.66

14689 90 I 7.50 6.25 9.38 11.25 10 0.81

14111 70 D 7.56 5.50 9.44 11.25 10 1.25

14668 80 F 7.56 4.13 9.50 11.25 10 0.81

14345 82 C 7.60 4.85 7.13 8.75 10 0.81

1405 98 K 7.63 6.38 6.25 8.75 6 0.81 Outboard pilot 10.500

1496 75 H 7.63 5.50 6.75 8.00 5 0.81

14161 80 D 7.75 4.50 8.69 11.25 10 1.31 5 mtg holes .560

1440 66 C 7.75 4.63 6.44 8.75 6 0.81

1441 80 F 7.75 4.63 6.44 8.75 6 1.25 3 mtg holes .562

1442 80 C 7.75 4.75 6.44 8.75 10 0.81 3 mtg holes .406

14326 79 D 7.78 6.44 7.13 8.75 6 0.81

1445 80 F 7.81 5.44 6.25 8.00 5 0.81

1446 80 F 7.81 5.44 6.25 10.00 8 0.81

14762 75 F 7.81 5.44 6.25 8.75 6 0.81

14482 75 F 7.84 4.44 9.50 11.25 10 0.81

14674 75 D 7.84 4.44 8.78 11.25 10 1.28

14124 75 D 7.88 4.50 9.44 11.25 10 0.81

14302 75 D 7.88 4.56 8.78 11.25 10 1.31

14647 75 D 7.88 4.56 8.66 11.25 10 1.31

14259 75 I 7.91 6.61 9.44 11.25 10 0.81

14828 75 I 7.94 6.69 11.25 12.75 5 0.66 Step hub pilot 14.250

14166 77 M 8.00 5.75 6.44 8.75 6 0.78

14167 78 R 8.00 5.56 6.52 8.75 6 0.81

14169 82 M 8.00 5.75 6.44 8.75 10 0.78


22


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


1450 77 E 8.00 7.31 9.50 11.25 10 0.81

1487 80 E 8.00 7.44 11.00 12.75 6 0.66

14411 81 F 8.02 4.32 9.00 11.25 10 1.28

14683 100 H 8.02 4.70 9.00 11.25 10 1.31 Outboard pilot 13.125

14735 70 F 8.02 5.47 6.25 8.75 6 0.81

1414 75 B 8.06 7.50 11.25 12.75 5 0.66

14249 67 F 8.06 3.75 7.13 8.75 6 0.81

1436 85 E 8.06 7.50 11.25 12.75 5 0.78

14756 82 F 8.06 4.03 8.69 11.25 10 1.31

14635 77 F 8.09 3.50 6.75 8.75 6 0.81 3 mtg holes .531

14125 85 A 8.13 5.50 9.44 11.25 10 0.81

1421 80 Q 8.13 6.63 11.00 12.50 5 0.66 Spot face 5 holes 1.870

1439 76 E 8.13 7.69 9.44 11.25 10 0.81

1471 80 E 8.13 7.50 9.50 11.25 10 0.81

1483 85 E 8.13 7.50 9.44 11.00 5 0.78

1484 76 E 8.13 7.50 9.44 11.00 6 0.78

1488 85 E 8.13 7.63 9.44 11.25 10 1.03

14395 76 E 8.16 7.44 9.50 11.25 10 0.81

1470 78 E 8.16 7.44 9.50 11.25 5&6 0.78

1437 85 I 8.19 7.00 9.75 11.25 10 0.81

1438 99 I 8.19 7.00 9.75 11.25 6 0.78

14702 65 H 8.19 5.50 7.00 8.75 10 0.71

14455 71 F 8.22 3.75 9.50 11.25 10 0.81

1402 85 F 8.25 5.44 6.45 8.75 10 0.75 3 mtg holes .531 * O.B.pilot 11.250

1415 70 F 8.25 5.44 6.44 8.75 6 0.81 3 mtg holes .343 * O.B. pilot 11.250

1410 90 I 8.38 7.38 8.66 11.25 10 0.81

14139 80 G 8.38 7.50 11.25 12.75 5&6 0.66 Step hub pilot 14.250

14159 75 F 8.38 6.38 9.00 11.25 10 1.31

14239 75 D 8.38 5.50 8.69 11.25 10 1.31 5 mtg holes .562

1428 77 E 8.38 7.75 11.25 12.75 5&6 0.78

14313 95 Q 8.38 7.38 10.50 12.75 5 0.78 Use K exciter hole pattern

1455 85 E 8.38 7.84 11.00 12.50 5&6 0.66

1469 80 E 8.38 7.84 11.00 12.50 5 0.78

1472 85 E 8.38 7.84 9.44 11.25 10 0.81


1452 85 F 8.44 5.50 6.25 8.75 6 0.66 3 mtg holes .406

14579 84 F 8.44 4.49 6.29 8.00 5 0.81

14106 85 A 8.50 6.56 9.75 11.25 10 0.81

14113 85 H 8.50 5.50 6.44 8.75 6 1.25 3 mtg holes .531 * O.B.pilot 11.250

14201 83 E 8.50 7.36 10.50 12.75 5 0.78

1451 85 D 8.50 6.56 9.00 11.25 10 0.81

1453 85 D 8.50 6.56 9.75 11.25 5 0.66

14877 86 E 8.50 7.47 11.00 12.50 5&6 0.66

14736 76 F 8.54 6.50 6.25 8.75 6 0.84

14223 82 F 8.56 4.59 8.75 11.25 10 0.81

14291 82 L 8.56 4.53 9.50 11.25 10 0.81

1454 85 D 8.56 7.00 9.44 11.00 6 0.66

14729 110 F 8.56 4.88 7.13 8.75 6 0.81

14419 118 U 8.63 6.62 9.44 11.25 10 1.31 5 mtg holes .562

1473 85 E 8.63 8.13 9.00 11.25 10 0.81

1474 79 E 8.63 8.13 9.44 11.25 10 0.81

14456 78 D 8.69 6.75 9.38 11.25 10 0.81

1480 85 Q 8.69 6.31 11.00 12.50 5&6 0.66 Spot face holes 1.380

1486 83 I 8.72 7.63 11.00 12.50 5 0.66 Spot face 5 holes 1.380

14731 95 Q 8.74 5.25 8.78 11.25 10 1.00

1403 120 U 8.75 6.70 9.44 11.25 10 1.31 5 mtg holes .562 * Notched

14274 90 F 8.75 5.45 8.53 11.25 10 1.28


23


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


14351 85 E 8.75 8.22 10.66 13.19 10 1.28

14541 87 F 8.75 4.50 9.00 11.25 10 1.31

14542 87 F 8.75 4.50 9.00 11.25 10 0.81

1464 85 Q 8.75 6.25 8.66 11.25 10 0.81

14273 95 F 8.76 5.45 8.53 11.25 10 1.28

14331 95 F 8.79 6.98 8.99 10.83 10 0.81

14437 82 Q 8.81 5.31 8.78 11.25 10 0.94

14581 85 H 8.81 6.37 6.75 8.75 6 0.81

14947 87 Q 8.81 4.35 8.78 11.25 10 1.31

14151 92 Q 8.86 5.25 8.78 11.25 10 1.31

14529 82 F 8.86 4.53 8.75 11.25 10 1.31

14684 110 H 8.86 5.50 8.78 11.25 10 0.94

14574 95 F 8.87 5.38 8.78 11.25 10 0.94

14575 78 F 8.87 5.38 8.78 11.25 10 1.31

14158 82 Q 8.91 4.40 9.00 11.25 10 1.31

14675 90 D 8.91 5.38 8.78 11.25 10 1.28

1456 82 Q 8.94 6.44 9.44 11.25 10 0.81

1431 85 Q 8.97 6.50 8.53 11.25 10 1.03

14546 84 F 8.98 5.50 8.75 11.25 10 0.81

14116 83 Q 9.00 6.50 9.75 11.25 5 0.66

14153 97 F 9.00 5.44 9.00 11.25 10 1.31

14155 83 F 9.00 6.69 7.50 8.75 6 0.81

1457 90 I 9.00 7.81 9.75 11.25 6 0.81

1458 90 I 9.00 7.81 9.75 11.25 10 0.81

14084 80 E 9.03 6.34 10.94 13.19 10 1.25

14545 100 Q 9.04 5.56 8.78 11.25 10 0.94

14549 95 Q 9.04 5.54 9.00 11.25 10 1.28

14943 90 Q 9.04 4.53 9.00 10.83 8 0.97

14945 92 Q 9.04 4.53 8.78 11.25 10 0.94


14408 90 H 9.08 6.40 7.00 8.75 6 0.81

14409 90 H 9.08 6.40 7.00 8.75 10 0.78

14025 110 E 9.09 8.59 11.06 13.19 10 1.04

14086 92 E 9.15 7.40 11.22 13.19 10 0.91

14792 90 Q 9.18 4.66 8.66 11.25 10 1.28

14254 97 Q 9.22 5.50 9.00 11.25 10 1.31

14255 105 F 9.22 5.90 8.53 11.25 10 1.31

14372 103 Q 9.22 5.74 8.78 11.25 10 1.28

14569 97 Q 9.22 5.50 9.00 11.25 10 1.31

14026 110 E 9.25 8.62 11.22 13.19 10 0.89 2 holes M12 X 1.75 tapped

14085 110 E 9.29 7.50 11.22 13.19 10 0.91 2 mtg holes .437 * 2- M12 X 1.75

14055 99 F 9.31 7.50 9.38 11.25 10 0.81

14015 105 H 9.41 5.13 6.75 8.75 6 0.84 3 mtg holes .531


1468 95 H 9.47 7.31 9.00 11.25 10 0.81 3 mtg holes .562

1481 89 D 9.47 7.31 9.44 11.25 10 0.81

14422 96 F 9.50 6.44 7.00 8.75 10 0.75

1459 90 D 9.50 7.56 9.75 11.25 5 0.66

14156 110 H 9.81 6.50 9.00 11.25 10 1.31

14256 110 H 9.81 6.50 8.53 11.25 10 1.31

14682 132 H 9.81 6.50 9.00 11.25 10 1.31 Outboard pilot 13.125

14685 132 H 9.84 6.54 9.00 10.83 8 0.97


14474 95 F 9.94 6.50 7.00 8.75 10 0.78


14974 108 F 10.09 7.25 8.53 11.25 10 0.81 Outboard pilot 13.250

14299 95 H 10.12 7.63 9.44 11.25 10 1.31 5 mtg holes .656


24


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


14016 85 E 10.25 7.88 8.70 10.81 8 0.87 2 holes M12 X 1.25 tapped

14017 85 E 10.25 7.44 11.06 13.19 10 1.03 2 holes M12 X 1.50 tapped

14975 108 F 10.25 7.50 8.53 11.25 10 0.81 Outboard pilot 13.250

14972 108 F 10.38 7.75 8.66 11.25 10 0.81 Outboard pilot 13.250

14973 105 F 10.38 7.53 8.53 11.25 10 0.81 Outboard pilot 13.250



14119 100 H 10.59 7.75 9.00 11.25 10 0.65 Outboard pilot 13.380

14576 107 H 10.59 7.75 9.00 10.83 8 0.97

14971 108 F 10.59 7.75 8.53 11.25 10 0.81 Outboard pilot 13.250

14977 105 F 10.59 7.75 8.78 11.25 10 0.94 Outboard pilot 13.250

14853 117 H 10.70 7.48 11.23 13.19 10 0.91 3 mtg holes M12 X 1.75 tapped

14806 105 F 10.94 7.50 6.44 8.75 6 0.81

14989 105 H 11.59 9.21 9.00 10.83 8 0.97



14039 145 H 8.66 6.72 9.44 11.25 10 1.31 5 mtg holes


14049 180 H 12.38 10.58 9.44 11.25 10 1.31 5 mtg holes .562

15802 100 H 8.31 6.44 8.69 11.25 10 0.91 3 mtg holes .531 * 13X1/2 tapped

15908 120 T 8.31 6.50 11.06 13.19 10 1.03 Outboard pilot 15.230

14011 110 E 9.25 7.68 11.06 13.19 10 0.98 2 mtg holes M14 X 2 tapped

15287 95 E 10.00 9.50 11.06 13.19 10 1.03

15789 121 E 10.13 8.38 11.06 13.19 10 1.03

14013 90 E 10.63 8.75 11.06 13.19 10 0.98

15288 100 E 10.69 8.38 11.06 13.19 10 1.03

15790 121 E 10.69 8.38 11.06 13.19 10 1.03

15304 98 F 7.50 4.63 8.65 11.25 8 0.88

15231 98 C 8.50 5.63 8.66 11.25 8 0.88

1575 80 D 8.80 6.60 8.53 11.25 10 0.81

15169 38 B 3.28 2.84 9.88 11.00 6 0.52 Step hub pilot 12.000

15406 40 E 3.63 2.78 5.13 6.50 6 0.53

15523 50 E 4.88 4.35 9.50 11.25 10 0.78

15464 65 K 5.53 3.72 7.50 9.00 5 0.53

1500 65 B 6.13 5.44 9.50 11.25 6 0.66

1501 65 B 6.13 5.44 10.00 11.50 6 0.66

1503 70 B 6.50 5.88 10.00 11.50 6 0.66

15251 75 J 6.91 5.91 10.63 12.00 5 0.66 Step hub pilot 13.250

15161 70 B 7.06 5.50 11.00 12.50 5 0.66

15441 68 F 7.06 4.38 6.28 8.75 6 1.03 3 mtg holes .531

15179 85 B 7.16 4.31 8.69 11.25 10 1.28 5 mtg holes .515

1523 70 A 7.25 5.50 9.44 11.25 10 0.81

15807 70 D 7.28 5.69 9.06 11.25 8 0.89

1504 80 B 7.50 6.50 9.50 11.25 10 0.81

1505 80 B 7.50 6.50 9.50 11.25 6 0.66

15.13" Diameter

15.50" Diameter

15.75" Diameter

16.00" Diameter


25


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


1506 80 B 7.50 6.50 10.00 11.50 6 0.66

1520 80 N 7.50 5.63 6.25 8.75 6 0.81

1522 80 A 7.50 5.63 6.25 11.25 10 0.81

15136 80 K 8.00 6.63 6.25 8.00 5 0.81

1525 85 K 8.00 6.63 6.25 8.75 6 0.81

1529 85 A 8.00 6.63 6.25 11.25 10 0.81

1507 90 B 8.25 7.50 9.50 11.25 10 0.81

1583 85 F 8.25 6.00 9.38 11.25 10 0.81

15177 89 J 8.38 6.50 11.50 12.75 5 0.65 Outboard pilot 14.250

15152 80 C 8.53 5.94 7.50 8.75 6 0.81

1534 60 C 8.66 8.28 7.13 8.75 6 0.81

15735 60 C 8.66 3.00 7.13 8.75 6 0.81

15424 60 C 8.72 2.50 7.13 8.75 6 0.81

1559 85 D 8.75 6.50 9.88 11.25 10 0.81

15522 80 F 8.81 5.44 8.00 10.00 4&8 4 holes .531 * 8 holes .781

15102 100 H 8.85 5.56 9.00 11.25 10 0.84


15165 90 Q 9.13 6.50 9.38 11.25 10 0.81

1564 90 M 9.13 6.13 9.75 11.25 10 0.81

15817 100 H 9.50 8.25 8.07 11.25 10 0.89

15819 94 H 9.63 7.25 8.65 11.25 10 0.89

1509 95 Q 9.75 6.53 11.00 12.50 6 0.66 Spot face 6 holes 1.380

15164 95 Q 9.75 6.50 9.38 11.25 10 0.81

1533 105 M 9.75 7.50 9.44 11.25 10 0.81

1563 95 M 9.75 7.50 9.88 11.25 10 0.81

15974 75 F 9.78 5.94 6.44 8.75 3&6 3 holes .688 * 6 holes 1.250

15806 100 D 10.00 8.75 8.08 11.25 8 0.89

15818 114 H 10.00 8.75 8.07 11.25 8 0.89

1540 100 M 10.25 6.50 9.38 11.25 10 0.81

15975 75 F 10.28 6.44 6.44 8.75 3&6 3 holes .688 * 6 holes 1.250

1536 100 M 10.44 8.00 9.44 11.25 10 0.81

1535 100 M 10.75 8.50 9.44 11.25 10 0.81

15907 110 D 10.78 8.88 8.08 11.25 8 0.89

15074 78 S 7.75 5.10 9.06 10.83 8 0.82 2 mtg holes M12 X 1.5 tapped

15055 80 S 8.94 5.13 9.06 10.83 8 0.80

15115 98 H 8.38 6.63 11.74 13.19 10 0.89 Outboard pilot 14.530

15111 126 H 9.22 6.75 9.47 11.25 10 1.26 3 holes M12 X 1.75 tapped

15112 126 H 9.22 6.75 9.47 11.25 10 1.26 3 holes M12 X 1.75 tapped

1551 105 D 9.88 7.55 8.58 11.25 8 0.90

15117 110 H 10.12 7.94 11.07 13.19 10 1.03 2 holes M12 X 1.75 tapped

15114 145 H 10.63 7.64 11.62 13.19 5&10 5 holes .718 * 10 holes .906

15124 100 H 10.63 7.64 11.62 13.19 5&10 5 holes .718 * 10 holes .906

15494 115 Q 10.66 6.88 11.74 13.19 5&10 5 holes .955 * 10 holes .910

15495 118 Q 11.00 7.56 11.74 13.19 5&10 5 holes .955 * 10 holes .910

15116 150 H 11.26 9.20 9.42 11.25 10 1.28 Outboard pilot 12.917

15113 134 H 11.87 9.31 11.74 13.19 15 0.94 3 holes M12 X 1.5 tapped

15254 55 D 5.25 3.63 9.50 11.25 12 0.52

15219 65 K 5.44 3.75 7.00 8.00 5 0.53

16.10" Diameter

16.14" Diameter

16.25" Diameter


26


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


1521 65 K 5.53 3.72 7.50 9.00 5 0.53

15725 65 K 5.75 3.50 6.25 8.00 5 0.52

15121 60 K 6.06 4.06 9.00 11.25 10 1.25

15076 65 R 6.84 3.84 6.28 8.75 6 1.03 3 mtg holes .531

15989 110 F 8.81 4.44 9.00 11.25 10 1.28 3 mtg holes .531

15569 105 C 10.00 7.50 11.63 13.19 10 0.92

15573 135 H 12.63 10.50 11.62 13.19 10 0.92

16247 90 S 8.90 5.92 11.62 13.21 10 0.91

16275 110 S 10.19 6.75 11.62 13.21 10 0.91

16262 65 O 4.47 4.50 7.50 9.00 5 0.53

16343 65 B 5.06 4.44 9.50 11.25 6 0.53

16263 70 O 5.44 5.31 7.50 9.00 5 0.53

16128 70 E 5.65 4.75 11.25 12.75 5 0.65

16663 71 E 5.75 5.31 11.00 12.75 6 0.66

16264 80 O 5.88 6.44 7.50 9.00 5 0.53

1605 65 E 6.03 5.06 11.00 12.50 5 0.66

1615 65 E 6.09 5.44 9.44 11.00 6 0.66

16151 65 E 6.12 5.41 9.25 11.25 5&6 0.78

1620 65 B 6.19 5.69 11.00 12.75 6 0.66

16289 89 I 6.40 5.34 10.00 12.75 6 0.81

16209 90 B 6.50 5.75 10.50 12.00 10 0.78 Step hub pilot 10.250

16937 65 I 6.50 5.44 11.00 12.50 6 0.65

1653 70 E 6.69 6.13 11.25 12.75 6 0.66

1657 70 I 6.88 5.75 11.25 12.75 5&6 0.66

16865 70 I 6.88 5.75 11.25 12.75 6 0.53

1658 70 E 6.94 6.00 11.00 12.50 5&6 0.66

16052 71 E 7.00 6.56 13.88 14.88 10 0.47

1665 75 G 7.06 6.13 11.25 12.75 5 0.66 Step hub pilot 14.250

1667 75 E 7.06 6.44 11.50 12.75 5&6 0.66

16867 70 I 7.06 5.63 11.25 12.75 6 0.53

16895 70 I 7.06 5.56 9.44 11.25 10 0.81

1644 85 P 7.13 5.00 7.13 8.75 6 0.81

1690 75 E 7.13 6.44 11.00 12.75 6 0.65

16265 75 E 7.22 6.50 11.00 12.50 5&6 0.66

1673 75 D 7.25 5.63 9.44 11.25 10 0.81

1672 75 G 7.31 6.38 11.25 12.75 5&6 0.66 Step hub pilot 14.250

16252 75 E 7.38 6.56 11.25 12.75 5&6 0.66

16523 75 I 7.38 6.13 9.38 11.25 10 0.81 10 X .125 G.S.

16992 100 I 7.43 6.40 11.25 12.75 6 0.78

1687 75 E 7.44 6.50 9.44 11.00 6 0.66

1649 80 I 7.50 6.00 9.38 11.25 10 0.81

16868 85 I 7.50 6.31 11.25 12.75 5&6 0.66

16884 80 E 7.56 6.75 11.25 12.75 5&6 0.65

16896 80 I 7.56 6.50 11.00 12.50 5&6 0.65

1691 85 I 7.56 6.31 8.66 11.25 10 0.81



16993 100 M 7.63 6.59 11.25 12.75 6 0.78

16664 82 N 7.72 4.69 6.28 8.75 6 1.03 3 mtg holes .530

16135 80 G 7.75 6.81 11.25 12.75 5 0.66 Step hub pilot 14.250

16164 80 H 7.75 5.00 8.69 11.25 10 1.03 5 mtg holes .562

16.50" Diameter

16.46" Diameter


27


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


16026 105 D 7.81 5.38 9.00 11.25 10 1.31

16869 80 I 7.81 6.75 11.25 12.75 5 0.66

16871 80 E 7.81 7.00 9.44 11.00 5&6 0.66

16872 80 E 7.81 7.00 9.44 11.00 5 0.78

16676 90 I 7.87 6.62 11.00 12.50 12 0.63 Step hub pilot 11.250

16452 100 H 7.88 5.25 8.69 11.25 10 1.31 5 mtg holes .562

16299 77 D 7.89 5.65 9.44 11.25 10 0.81

1611 85 R 8.00 5.75 6.25 8.00 5 0.81

1612 85 R 8.00 5.75 6.25 8.75 6 0.81

1613 85 Q 8.00 5.75 6.25 11.25 10 0.81

1614 85 Q 8.00 5.75 7.13 11.25 10 0.81



1642 87 I 8.00 6.48 9.38 11.25 10 0.81

16886 85 E 8.00 7.38 11.25 12.75 6 0.65

16887 85 E 8.00 7.44 10.25 11.25 6 0.78

16888 85 E 8.00 7.44 10.25 11.25 10 0.81

16889 85 E 8.00 7.44 10.25 12.75 6 0.78

16901 85 I 8.00 6.75 11.00 12.50 5&6 0.65

1696 85 I 8.00 6.50 10.25 11.25 10 0.81

16979 95 I 8.00 6.50 10.88 12.75 24 0.65 Step hub pilot 11.250

16595 80 H 8.02 5.31 8.78 11.25 10 1.28 Outboard pilot 13.38

1616 85 H 8.06 5.50 8.66 11.25 10 1.25 5 mtg holes .562

16902 80 H 8.09 5.44 8.66 11.25 10 0.81

16903 80 H 8.09 5.44 8.66 11.25 10 1.06

16352 91 H 8.10 5.48 8.69 11.25 10 1.09

16121 96 I 8.13 5.50 9.44 11.25 10 0.81

16132 85 I 8.13 6.75 11.00 12.50 5&6 0.78

1625 85 E 8.13 7.50 9.00 11.25 10 0.81

1638 95 I 8.13 6.88 9.00 11.25 10 0.81

16384 90 E 8.13 7.50 11.25 12.75 5 0.66

16779 105 I 8.13 7.31 11.25 12.75 5&6 0.78

1688 85 E 8.13 7.44 9.38 11.25 10 0.81

16907 85 E 8.13 7.56 11.00 12.75 6 0.65

16136 85 H 8.19 5.06 8.75 11.25 10 1.03 5 mtg holes .562

16391 95 E 8.19 7.25 9.50 11.25 10 0.81

16444 91 H 8.20 5.50 7.13 8.75 6 0.81 Outboard pilot 11.250


16134 90 Q 8.25 5.63 9.44 11.25 10 0.81

16139 93 G 8.25 7.38 11.25 12.75 5&6 0.66 Step hub pilot 14.250

1630 90 E 8.25 7.56 9.44 11.25 10 1.06

1631 90 E 8.25 7.56 9.44 11.25 10 0.81

16324 85 I 8.25 7.00 11.25 12.75 6 0.66

16385 85 G 8.25 7.38 11.25 12.75 5 0.66 Step hub pilot 14.250

16392 90 D 8.25 6.56 9.50 11.25 10 0.81

16401 85 D 8.25 6.56 9.50 11.25 6 0.66

16516 93 G 8.25 7.38 11.25 12.75 5 0.75 Step hub pilot 14.250

16874 99 E 8.25 7.19 9.44 11.00 5&6 5 hole .781 * 6 hole .656

16876 85 E 8.25 7.44 11.25 12.75 5 0.65

16137 90 H 8.31 5.56 9.44 11.25 10 1.25 5 mtg holes .562

16436 87 P 8.31 6.25 7.50 8.75 6 0.81

16879 91 E 8.31 7.61 13.50 15.00 10 0.53

1689 97 I 8.31 6.62 8.69 11.25 10 0.81

16877 95 A 8.44 7.37 11.25 12.75 5&6 0.78

16878 85 I 8.44 7.50 11.00 12.50 6 0.78

16894 100 I 8.44 7.50 11.25 12.75 5 0.65

16961 105 D 8.44 6.50 10.88 12.50 12 0.66 Step hub pilot 11.250


28


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


16149 102 I 8.50 7.50 11.00 12.50 5&6 0.66

16251 80 I 8.50 7.50 9.00 11.25 10 0.81

16311 95 E 8.50 7.81 9.44 11.25 10 0.81

16778 99 I 8.50 7.38 11.25 12.75 5&6 0.78

16791 100 I 8.50 7.44 8.66 11.25 10 0.81

16988 95 H 8.56 5.44 8.66 11.25 10 1.31

16911 90 D 8.62 6.50 8.66 11.25 10 0.81

16912 90 Q 8.62 6.50 9.38 11.25 10 0.81

16129 85 I 8.63 7.50 11.00 12.50 5 0.66

16131 95 I 8.63 7.38 8.66 11.25 10 0.81

16367 90 H 8.63 5.63 8.78 11.25 10 1.25 Outboard pilot 13.38

16917 92 I 8.63 7.44 8.66 11.25 10 0.81

16927 115 I 8.63 7.43 8.66 11.25 10 1.00

16248 97 L 8.69 5.44 10.94 13.19 10 1.25 Spot face 10 holes 1.870

16036 90 E 8.75 7.50 9.44 13.19 10 1.03 Spot face 10 holes 1.870

16054 95 l 8.75 7.50 11.00 12.50 12 0.66 Step hub pilot 11.250

16111 100 D 8.75 6.88 9.75 11.25 5 0.66 Notched for sensor

16112 100 D 8.75 6.87 9.75 11.25 10 0.81 Notched for sensor

16253 90 Q 8.75 5.88 9.38 11.25 10 0.81

1632 95 I 8.75 7.50 9.00 11.25 10 0.81

16321 95 I 8.75 7.50 9.00 11.25 10 1.06

16325 90 I 8.75 7.50 11.25 12.75 5&6 0.78

16326 90 I 8.75 7.50 11.25 12.75 6 0.66

1634 95 I 8.75 7.50 9.00 13.19 10 1.06

16341 95 I 8.75 7.25 9.75 13.19 10 1.06

1639 108 I 8.75 7.50 9.50 11.25 10 0.81

1640 105 I 8.75 7.50 9.50 11.25 5&6 5 holes .81 * 6 holes .66 * Notched

16727 105 I 8.75 7.50 11.00 12.50 5 0.66

1676 105 I 8.75 7.50 9.44 11.00 5 6 holes .656 * 5 holes .781

1685 95 I 8.75 7.50 9.44 11.25 10 0.81

16881 90 D 8.75 6.56 9.38 11.25 10 0.81

16931 90 D 8.75 6.63 9.50 11.50 6 0.65

16997 107 I 8.75 7.50 10.50 12.75 5&6 0.78 Exciter pattern J

16728 107 Q 8.81 7.44 11.25 12.75 5&6 0.66

16739 85 H 8.81 5.87 8.53 11.25 10 1.25 Outboard pilot 13.38

16941 90 H 8.81 6.00 8.75 11.25 10 0.81 5 mtg holes .562

1693 90 I 8.87 7.62 11.00 12.75 6 0.65

16259 90 I 8.88 7.50 11.00 12.50 6 0.66

1684 90 I 8.88 7.50 9.88 11.25 10 0.81

16618 95 I 8.92 7.50 9.38 11.25 10 0.81

16027 100 H 8.97 6.44 8.53 11.25 10 1.31 5 mtg holes .562

1600 90 H 9.00 7.70 6.28 8.75 6 1.03 Outboard pilot 11.250

1601 95 Q 9.00 6.41 9.44 11.25 10 0.81

16175 90 H 9.00 6.44 9.44 11.25 10 1.25 5 mtg holes .562

16396 111 I 9.00 7.63 9.50 11.25 10 0.81 Notched for sensor

16402 110 I 9.00 7.63 9.50 11.25 5&6 0.78 Notched for sensor

16406 90 I 9.00 7.50 11.00 12.50 5 0.66

16408 90 I 9.00 7.56 11.25 12.75 5 0.78

16409 90 I 9.00 7.50 11.25 12.75 6 0.66

16171 92 H 9.04 6.10 8.78 11.25 10 1.25

16573 90 F 9.04 6.36 8.78 11.25 10 1.25 Outboard pilot 13.38

16142 101 H 9.06 6.38 8.75 11.25 10 0.81 5 mtg holes .562

1617 90 Q 9.06 6.75 6.25 11.25 10 0.81

16172 90 H 9.06 5.56 9.44 11.25 10 1.25 5 mtg holes .562

1618 90 Q 9.06 6.75 7.13 11.25 10 0.81

1621 90 R 9.06 6.63 6.25 8.75 6 0.81

1622 90 Q 9.06 6.75 8.66 11.25 10 0.81


29


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


1664 95 Q 9.06 6.75 9.44 11.25 10 0.81

1679 95 Q 9.06 6.75 9.87 11.25 10 0.81

1692 90 I 9.06 7.75 9.50 11.25 10 0.81

1652 90 D 9.13 6.50 9.38 11.25 10 0.81 10 X .125 G.S.

16075 125 H 9.15 5.87 9.00 11.25 10 1.31

16065 127 H 9.19 5.44 9.00 11.25 10 1.31 5 mtg holes .562

16155 92 E 9.19 6.56 9.00 11.25 10 1.25

16189 90 Q 9.19 6.44 9.44 11.25 10 0.81

16543 99 D 9.19 7.56 9.50 11.50 6 0.66

16677 87 H 9.19 6.25 8.78 11.25 10 1.28 Outboard pilot 13.50

16035 128 Q 9.22 5.50 8.53 11.25 10 1.31

16322 95 I 9.25 8.00 9.00 11.25 10 0.81

1666 90 I 9.25 7.88 9.44 11.25 10 0.81

16913 105 I 9.25 7.50 11.00 12.50 12 0.65

16615 115 H 9.31 6.31 8.65 11.25 10 0.91 2 holes M12 X 1.5 tapped

16165 118 H 9.38 6.44 8.75 11.25 10 1.28

16366 113 U 9.44 6.55 11.25 13.19 10 0.94


16196 90 D 9.50 6.75 11.00 12.50 5&6 0.66 Spot face holes 1.380

16231 100 I 9.50 8.25 11.11 13.19 10 1.06 Spot face 10 holes 1.870

1626 95 D 9.50 7.56 7.13 11.25 10 0.81

16261 95 D 9.50 7.56 7.13 11.25 10 0.94

16271 95 D 9.50 7.63 8.69 11.25 10 0.81

16281 105 D 9.50 7.50 9.44 11.25 10 1.06

16284 95 D 9.50 7.56 9.44 11.00 6 0.66

1629 105 D 9.50 7.50 9.44 11.25 10 0.81

16291 95 D 9.50 7.63 9.38 11.25 10 0.81 10 X .125 G.S.

16292 95 D 9.50 7.57 9.44 11.25 10 0.81

1670 95 A 9.50 7.63 9.44 13.19 10 1.06 Spot face 10 holes 1.870

16701 94 A 9.50 7.63 11.26 13.19 10 1.06

16701 100 A 9.50 7.63 11.26 13.19 10 1.06

1671 96 K 9.50 7.63 7.13 10.00 8 0.81 Spot face 8 holes 1.870

1682 105 D 9.50 7.56 9.88 11.25 10 0.81

16138 123 Q 9.52 6.27 8.78 11.25 10 0.94

16415 86 I 9.53 8.34 11.25 12.75 5&6 0.66

16417 95 D 9.53 7.75 11.25 12.75 5 0.66 Spot face 5 holes 1.780

16549 90 H 9.59 6.69 8.78 11.25 10 0.94

16687 92 H 9.74 6.80 8.78 11.25 10 1.25

16062 118 H 9.75 6.50 8.53 11.25 10 1.31 Outboard pilot 13.250


16057 100 H 9.78 6.87 9.00 11.25 10 1.31

16179 115 H 9.84 6.38 8.78 11.25 10 0.94

1606 135 H 9.88 6.50 9.00 11.25 10 1.31 Notched for sensor

16063 115 H 9.88 6.81 9.00 11.25 10 1.31

16521 90 Q 9.88 6.75 9.38 11.25 10 0.81 10 X .125 G.S.

16422 105 I 9.94 9.06 9.44 11.00 5 0.78

16423 105 I 9.94 9.06 9.44 11.00 6 0.66

16946 119 E 10.00 9.00 9.44 11.00 5&6 5 holes .781 * 6 holes .656

16224 95 D 10.06 7.84 11.00 12.50 6 0.66 Spot face 6 holes 1.380

16225 107 D 10.06 7.63 8.78 11.25 10 0.81

1637 95 H 10.13 7.50 9.00 11.25 10 0.81 3 mtg holes .562

16421 105 I 10.13 9.13 9.50 11.25 10 0.81

1695 108 D 10.13 7.56 9.44 11.25 10 0.81


16368 100 H 10.19 7.44 9.44 11.25 10 0.81

1636A 100 H 10.19 7.44 9.44 11.25 10 1.31 5 mtg holes .562 * O.B. pilot 13.000

1636C 100 H 10.19 7.44 8.66 11.25 10 1.31 5 mtg holes .562 * O.B. pilot 13.000


30


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


1636D 100 H 10.19 7.44 8.66 11.25 10 1.31 5 mtg holes .562 * O.B. pilot 12.750

16126 110 H 10.25 7.50 11.06 13.18 10 1.03

16857 105 H 10.25 7.43 9.38 11.25 10 0.81

16145 105 H 10.30 7.30 8.78 11.25 10 0.94

16975 112 I 10.31 9.13 9.44 11.25 10 0.81

16123 105 H 10.38 7.44 9.00 11.25 10 0.81

16793 110 H 10.38 7.44 8.78 11.25 10 0.94

16797 105 H 10.38 7.70 8.53 11.25 10 0.81


16798 105 H 10.44 7.50 9.00 11.25 10 0.81

16921 105 H 10.44 7.50 8.66 11.25 10 1.31

16922 105 H 10.44 7.50 8.66 11.25 10 0.81 Outboard pilot 13.38

16923 105 H 10.44 7.50 8.75 11.25 10 0.81 Outboard pilot 13.38

1697 100 M 10.44 8.00 9.44 11.25 10 0.81

16232 100 H 10.50 7.63 9.44 11.25 10 1.25 5 mtg holes .562

16792 110 H 10.54 7.50 8.78 11.25 10 0.94

16163 105 H 10.60 7.80 9.00 11.25 10 0.81

16169 105 H 10.60 7.80 8.78 11.25 10 0.81

16141 100 H 10.63 7.63 9.00 10.81 8 0.94

16729 105 H 10.63 7.63 9.44 11.25 10 0.81

16771 105 H 10.63 7.63 8.53 11.25 10 0.81

16794 110 H 10.63 7.63 9.00 11.25 10 0.81

16795 110 H 10.63 7.63 8.53 11.25 10 0.81

16108 95 M 10.69 7.88 11.38 13.19 10 0.81

16295 115 I 10.75 9.25 9.44 11.25 10 0.81

16146 115 H 10.81 8.25 8.78 11.25 10 0.81 Outboard pilot 13.190

16999 110 H 10.81 7.50 8.78 11.25 10 0.81

16371 108 H 10.88 7.75 9.00 11.25 10 1.25 3 mtg holes .562

16374 100 H 10.88 7.75 9.00 11.25 10 1.03 3 mtg holes .562


16240 138 Q 11.08 8.14 8.74 11.25 10 0.81

16238 90 M 11.19 8.13 8.69 11.50 10 1.19

16647 118 H 11.19 8.62 8.78 11.25 10 0.94 Outboard pilot 13.19

16049 145 H 11.25 9.13 9.00 11.25 10 1.31 9.805 G.S.

16073 144 H 11.25 9.13 8.53 11.25 10 0.81

16296 130 D 11.25 9.06 9.44 11.25 10 0.81

16045 132 H 11.44 8.50 8.78 11.25 10 0.81

16854 128 H 11.46 8.97 8.78 11.25 10 0.94

16827 130 H 11.47 8.94 8.78 11.25 10 0.94 10 Weight Pockets


16268 132 H 11.50 8.60 8.78 11.25 10 0.94

16269 127 H 11.50 8.60 8.53 11.25 10 0.94

16048 181 H 11.56 9.44 11.11 13.19 10 1.06

16051 181 H 11.56 9.44 11.25 13.19 10 1.06

16297 115 I 11.75 10.19 9.44 11.25 10 0.81

16362 110 F 11.75 6.75 9.44 11.25 10 1.25 5 mtg holes .562

16717 115 I 12.00 10.56 9.44 11.25 10 0.81

16719 120 I 12.00 10.56 9.44 13.19 10 1.06 Spot face 10 holes 1.870

16811 165 H 12.13 9.36 8.53 11.25 10 0.81



16814 132 H 12.39 9.63 8.78 11.25 10 0.94

16991 120 D 12.44 10.50 9.44 11.25 10 0.81

16981 100 F 12.63 7.50 9.44 11.25 10 1.25 5 mtg holes .562

1698 110 F 12.75 7.75 9.25 11.25 10 0.81

16982 110 F 12.75 7.75 9.44 11.25 10 1.06 Outboard pilot 13.25



31


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


16071 165 H 13.19 10.50 8.78 11.25 10 0.94



16624 106 D 10.93 8.38 11.42 13.19 10 0.91 Spot face 10 holes 1.620

16541 129 M 11.81 9.63 11.42 13.81 10 0.91 Spot face 10 holes 1.625

17489 55 E 5.00 4.31 10.50 12.00 10 0.78

1720 100 P 5.81 4.66 10.00 12.00 8 0.64

17598 85 U 7.13 4.50 8.76 11.25 10 0.81

1771 110 E 7.44 6.44 8.66 11.25 10 1.28

17076 90 H 8.31 6.81 9.00 11.25 10 0.94 5 mtg holes

1700 100 C 11.50 6.30 6.75 8.75 6 0.81

1701 100 C 11.50 6.75 9.75 11.25 10 0.81

1702 125 C 11.50 6.54 9.75 11.25 10 0.81 Step brake face 4.25

1706 125 C 11.50 6.54 9.44 11.25 10 0.81 Step brake face 4.25

17235 105 I 13.00 7.63 10.50 13.19 10 1.25 5 mtg holes

1775 65 E 5.09 4.44 9.88 11.63 10 0.66

17379 65 B 5.44 4.25 11.27 13.00 8 0.78

1786 68 P 5.63 4.44 9.00 11.25 10 1.13

17378 70 B 5.71 4.75 13.86 15.13 8 0.78

17295 70 I 5.75 4.44 10.50 12.00 10 0.78

17232 75 B 6.00 5.31 11.00 12.75 6 0.66

1717 110 S 6.38 4.63 9.44 10.63 10 0.53

1787 65 I 6.69 5.44 11.00 12.75 6 0.66

17789 80 U 6.81 4.62 11.25 12.50 24 0.78

17861 80 H 6.81 4.88 8.75 11.25 10 0.81

17250 85 U 7.13 4.50 8.76 11.25 10 0.81

1788 80 B 7.38 6.50 11.00 12.75 6 0.66

17226 85 A 7.44 5.56 11.00 13.25 12 0.78

17645 95 A 8.56 6.56 11.00 13.19 10 1.03

1759 95 A 8.81 6.94 11.00 13.25 12 0.66

1761 85 Q 8.88 6.19 9.44 11.25 10 0.81

17196 100 I 9.68 7.63 11.00 13.19 10 1.03

1708 100 M 9.75 7.25 9.44 11.25 10 0.81

17212 95 D 9.81 6.50 7.13 11.25 10 0.81

1780 100 Q 10.00 6.34 9.44 11.25 10 0.81

1711 125 A 10.88 8.88 9.44 13.19 10 0.81

17111 125 A 10.88 8.88 9.44 13.19 10 1.06

1712 136 A 10.88 8.88 9.44 11.25 10 0.81

1713 125 A 10.88 8.88 9.44 11.25 10 1.06

1714 125 A 10.88 8.88 10.63 13.19 10 1.06

18266 135 E 8.20 7.45 11.25 12.75 6 0.78

18788 138 E 8.25 7.63 11.00 12.75 6 0.66

18175 140 I 8.50 7.41 11.25 12.75 6 0.78 Exciter hole pattern E

18685 140 P 8.72 7.44 8.66 11.25 10 0.81

1800 140 I 8.75 7.50 9.50 11.25 10 0.81

16.54" Diameter

17.00" Diameter

17.25" Diameter

18.00" Diameter


32


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


18006 140 I 8.75 7.50 9.50 11.25 6 0.66

1804 140 I 8.75 7.50 9.00 11.25 10 0.81

1805 140 I 8.75 7.50 9.00 11.25 10 1.06

1806 140 I 8.75 7.50 9.00 13.19 10 0.81

1807 140 I 8.75 7.50 9.00 13.19 10 1.06 Spot face 10 holes 1.870

18171 140 I 8.75 7.50 11.25 12.75 6 0.66

18441 140 I 8.75 7.50 10.63 13.25 12 0.66 Step hub pilot 11.001

18174 140 I 8.88 7.56 11.25 12.75 6 0.78

18172 140 I 9.25 8.00 11.25 12.75 6 0.66

18173 140 I 9.25 8.00 11.25 12.00 5 0.78

1813 150 D 9.50 7.50 9.44 11.25 10 0.81

1818 140 I 9.50 8.25 9.44 11.25 10 0.81

1841 140 D 9.50 7.38 11.11 13.19 10 1.06

18018 120 I 9.75 7.88 11.11 13.19 10 1.09

1808 140 D 9.75 7.88 9.44 11.25 10 0.81

1809 140 D 9.75 7.88 9.44 11.25 10 1.06

1810 140 D 9.75 7.88 9.44 13.19 10 0.81

1811 124 D 9.75 7.88 9.44 13.19 10 1.06

1850 140 D 9.75 7.63 9.88 11.25 10 0.81

1814 140 I 10.00 8.50 9.44 11.25 10 0.81

18141 140 I 10.00 8.50 9.44 11.25 6 0.81

18142 140 I 10.00 8.50 9.44 13.19 10 1.06

18143 140 I 10.00 8.50 9.44 11.25 10 1.06

18314 175 Q 10.38 7.63 10.50 13.19 10 1.19

1820 140 I 10.88 9.63 9.44 13.19 10 1.06

1822 155 H 11.94 7.63 10.94 13.19 10 1.44 5 mtg holes .562

1821 155 Q 12.63 7.75 9.00 13.19 10 1.06 10 X .125 G.S.

19702 160 K 7.29 5.88 11.03 13.19 10 1.03 2 holes M16 X 2

19936 140 E 7.69 6.94 9.50 11.25 10 0.78

2028 160 I 7.50 6.50 13.75 15.25 6 0.78

2077 160 T 7.50 5.44 7.75 9.50 6 0.88

20353 130 B 7.68 6.00 12.75 15.00 12 0.75

2029 160 D 8.13 6.50 9.00 14.50 6 0.78

20805 150 A 8.25 5.50 11.00 12.50 12 0.66 Step hub pilot 11.250

20354 150 B 8.68 7.00 12.75 15.00 12 0.75

2021 210 L 9.25 7.75 13.25 15.00 12 0.78 Step hub pilot 13.500

2022 203 L 9.25 7.50 11.00 12.50 12 0.66 Step hub pilot 11.250

20790 180 B 10.13 8.63 11.75 14.00 14 1.03

2034 205 L 10.22 8.50 11.00 12.50 6 0.78

2000 185 L 10.25 8.75 9.44 11.25 10 0.81

2001 185 L 10.25 8.75 9.44 11.25 10 1.06

2002 185 L 10.25 8.75 9.44 13.19 10 0.81

2003 200 L 10.25 8.75 9.44 13.19 10 1.06

2009 200 L 10.25 8.75 10.63 13.19 6 0.81

2011 200 L 10.25 8.75 9.50 11.25 10 0.81

2012 185 L 10.25 8.75 9.50 11.25 10 1.06

2013 185 L 10.25 8.75 9.50 13.19 10 0.81

2019 154 L 10.25 8.75 9.50 13.19 10 1.06

20201 200 L 10.50 8.75 12.13 15.00 12 1.06

2016 200 M 10.75 8.50 11.25 12.75 5 0.78

2023 240 L 10.94 8.61 13.25 15.00 12 0.78 Step hub pilot 13.500

19.69" Diameter


20.00" Diameter

33


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


2023 240 L 10.94 8.61 13.25 15.00 12 0.94 Step hub pilot 13.500

20231 202 L 10.94 8.61 13.25 15.00 24 0.94 Step hub pilot 13.500

2027 221 L 10.94 8.61 11.00 12.50 12 0.66 Step hub pilot 11.250

20832 250 S 11.00 8.38 13.25 15.00 24 0.78

2035 190 A 11.25 9.00 9.50 11.25 6 0.66

20351 190 A 11.25 9.00 9.50 11.25 6 0.75

2020 225 L 11.38 8.20 11.00 12.50 12 0.66 Step hub pilot 11.250

2014 220 E 11.75 9.00 14.00 16.00 10 0.81 Additional flange

20033 232 S 12.50 9.13 9.44 13.19 10 1.06

2005 232 S 12.50 8.50 10.63 13.19 10 1.06

20053 237 S 12.50 8.50 10.63 13.19 6 1.03

20058 205 S 12.50 8.25 9.00 13.19 10 1.06

20056 205 S 12.63 8.63 9.44 13.19 10 1.06

20057 236 S 12.63 8.63 11.00 13.19 10 1.06

20031 200 S 13.00 10.50 9.44 13.19 10 1.06

20032 200 S 13.00 10.50 9.44 13.19 10 0.81

20051 223 A 13.00 10.50 10.63 13.19 10 1.06

20091 200 S 13.00 10.50 10.63 13.19 6 0.81

2026 220 A 13.25 6.50 12.75 15.00 12 0.78

20619 120 E 6.57 5.63 12.75 14.50 6 0.78

20461 130 B 7.25 5.00 17.25 18.38 16 0.66

20462 140 B 7.94 5.88 16.38 18.38 32 0.66

2036 163 B 9.00 8.06 12.75 14.88 12 0.91 Step hub pilot 13.250

20622 170 B 9.00 8.06 10.63 13.25 12 0.81 Step hub pilot 11.000

2057 236 A 10.31 7.88 12.75 15.00 8 0.78

2025 190 H 11.50 7.69 10.94 13.19 10 1.44 5 mtg holes .562

2055 350 S 14.50 12.00 12.63 15.00 8 1.13 Spot face 8 holes 2.250

2201 270 B 9.63 8.13 13.25 15.00 12 0.78

28401 320 O 6.13 5.50 10.49 13.50 8 0.66

28400 280 O 6.25 5.61 10.49 13.50 8 0.66

2400 500 M 14.19 11.69 16.00 18.00 12 0.78 Step hub pilot 16.500

26616 275 E 7.63 7.63 26.00 29.19 45 0.69 Flange on outside of drum

26608 350 E 9.62 9.62 26.00 30.13 45 0.69 Flange on outside of drum

26232 350 B 10.38 8.94 16.50 18.00 24 0.91

26491 380 P 12.00 8.50 16.50 18.00 24 0.87

2603 380 E 12.31 11.25 19.50 21.00 10 0.88

26603 380 E 12.31 11.25 19.50 21.00 16 0.91

2685 450 B 13.00 11.31 17.00 19.50 12 1.06

2626 450 L 13.38 11.00 19.00 22.00 12 1.03

2675 500 B 16.06 12.56 17.75 21.00 16 1.50

22.00" Diameter

23.00" Diameter

24.00" Diameter

26.00" Diameter

20.25" Diameter


34


DuraBrake

Part

Number

Wt.

(lbs)

Drum

Type

Overall

Depth

Brake

Face

Width

Hub

Pilot

Bolt

Circle

Bolt

Holes

No.

Bolt

Holes


3000 480 E 8.38 8.38 30.00 34.00 30 0.66

30730 450 E 8.63 8.63 30.00 34.00 45 0.69

30100 600 B 12.38 10.88 21.50 24.50 16 1.03

30852 600 B 12.38 10.69 21.50 25.00 16 0.91

30101 600 B 13.75 11.69 17.00 23.50 18 1.03

30851 675 B 15.00 13.88 21.50 25.00 16 1.16

30.00" Diameter

35

DuraBrake Brake Drums and Rotors Conversion Table

FRACTION INCH METRIC (mm) FRACTION INCH METRIC (mm)

1/64 0.015625 0.396875 33/64 0.515625 13.096875

1/32 0.031250 0.793750 17/32 0.531250 13.493750

3/64 0.046875 1.190625 35/64 0.546875 13.890625

1/16 0.062500 1.587500 9/16 0.562500 14.287500

5/64 0.078125 1.984375 37/64 0.578125 14.684375

3/32 0.093750 2.381250 19/32 0.593750 15.081250

7/64 0.109375 2.778125 39/64 0.609375 15.478125

1/8 0.125000 3.175000 5/8 0.625000 15.875000

9/64 0.140625 3.571875 41/64 0.640625 16.271875

5/32 0.156250 3.968750 21/32 0.656250 16.668750

11/64 0.171875 4.365625 43/64 0.671875 17.065625

3/16 0.187500 4.762500 11/16 0.687500 17.462500

13/64 0.203125 5.159375 45/64 0.703125 17.859375

7/32 0.208750 5.556250 23/32 0.718750 18.256250

15/64 0.234375 5.953125 47/64 0.734375 18.653125

1/4 0.250000 6.350000 3/4 0.750000 19.050000

17/64 0.265625 6.746875 49/64 0.765625 19.446875

9/32 0.281250 7.143750 25/32 0.781250 19.843750

19/64 0.296875 7.540625 51/64 0.796875 20.240625

5/16 0.312500 7.937500 13/16 0.812500 20.637500

21/64 0.328125 8.334375 53/64 0.828125 21.034375

11/32 0.343750 8.731250 27/32 0.843750 21.431250

23/64 0.359375 9.128125 55/64 0.859375 21.828125

3/8 0.375000 9.525.000 7/8 0.875000 22.225000

25/64 0.390625 9.921875 57/64 0.890625 22.621875

13/32 0.406250 10.318750 29/32 0.906250 23.018750

27/64 0.41875 10.715625 59/64 0.921875 23.415625

7/16 0.437500 11.112500 15/16 0.937500 23.812500

29/64 0.453125 11.509375 61/64 0.953125 24.209375

15/32 0.468750 11.906250 31/32 0.968750 24.606250

31/64 0.484375 12.303125 63/64 0.984375 25.003125

1/2 0.500000 12.700000 1 1.000000 25.400000

36

WARRANTY

DURABRAKE CO. WARRANTS ALL BRAKE DRUMS

MANUFACTURED BY DURABRAKE, WHEN PROPERLY

INSTALLED AND MAINTAINED TO BE FREE FROM

DEFECTS IN MATERIAL AND WORKMANSHIP.

THE RESPONSIBILITY OF THE COMPANY, UNDER THIS

WARRANTY, IS LIMITED TO REPLACEMENT, OF, OR

CREDIT FOR ANY DRUM WHICH HAS FAILED WITHIN

THREE MONTHS OF THE DATE OF ITS APPLICATION,

AND WHICH HAS BEEN RETURNED TO THE FACTORY,

FREIGHT PREPAID, AND FOUND, UPON EXAMINATION,

TO BE DEFECTIVE TO THE SATISFACTION OF THE

COMPANY.

THIS WARRANTY SHALL NOT APPLY TO BRAKE DRUMS

WHICH HAVE BEEN SUBJECTED TO MISUSE,

NEGLIGENCE, ACCIDENT, OR WHICH HAVE BEEN

MISAPPLIED OR TAMPERED WITH THEREBY AFFECTING

THE RELIABILITY OR STABILITY OF THE DRUM.

DU

RA

BR

AK

E

DURABRAKE CO.

Distributed By:

PO Box 1480, Los Altos, CA 94022Phone: (650)949-5365 Fax: (650)949-5371

[email protected]

î

BRAKE DRUM AND ROTOR CATALOG · 2019-11-02 · DuraBrake Drums are Interchangeable with – The...

Documents

Transcript of BRAKE DRUM AND ROTOR CATALOG · 2019-11-02 · DuraBrake Drums are Interchangeable with – The...