Br AAAC- 6201 Alloy Br Bare Aluminum
-
Upload
iwillback1000 -
Category
Documents
-
view
219 -
download
0
Transcript of Br AAAC- 6201 Alloy Br Bare Aluminum
-
8/2/2019 Br AAAC- 6201 Alloy Br Bare Aluminum
1/2
erican Wire Group, Inc.0 E. Hallandale Beach Blvd., Suite PH8andale, Florida 33009Free: 1-800-342-7215 Telephone: 1-954-455-3050 Fax: 1-954-455-9886
Mail: [email protected] Website: www.buyawg.comyright 2008-2010
AAAC- 6201 AlloyBare Aluminum
ApplicationsUsed as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum alloyto achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives AAAC higher resistance tocorrosion than ACSR.
ConstructionStandard 6201-T81 high strength aluminum conductors, conforming to ASTM Specification B-399, are concentric-lay-stranded, similar in construction and appearance to 1350 grade aluminum conductors. Standard 6201 alloy conductors aresimilar to other alloy conductors commercially known as Ardival, Aldrey or Almelec. They were developed to fill the need for an economical conductor for overhead applications requiring higher strength than that obtainable with 1350 grade aluminumconductors, but without a steel core. The DC resistance at 20C of the 6201-T81 conductors and of the standard ACSRs of the same diameter are approximately the same. Conductors of the 6201-T81 alloys are harder and, therefore, have a greater
resistance to abrasion than conductors of 1350-H19 grade aluminum.
Specifications AAAC bare conductor meets or exceeds the following ASTM specifications :
B-398 Aluminum Alloy 6201-T81 Wire for Electrical PurposesB-399 Concentric-Lay-Stranded 6201-T81 Aluminum Alloy Conductors.
Notes
Resistance is calculated using ASTM standard increments of stranding and metal conductivity of 52.5% IACS, ACresistance at 60Hz Current ratings are based on 75 oC conductor temperature, 25 oC ambient, 2ft/s wind, 96/watts/sq.ft sun, 0.5 coefficients of
emissivity and absorption.
esults 1 - 14 of 14 # Size KCM Strand Approx EC
Cond. withEquivalentResistance
Stranding Diameter Indiv. Wire
Diameter Complete
Cable
CrossSectional
Area
Weight Per 1000ft
RatedBreakingStrength
Ra
n 30.58 7/w 6 6/1 .0661 Inches .198 Inches .0240sq.inches
28.7 Lbs 1110 Lbs 107 Am
n 48.69 7/w 4 6/1 .0834 Inches .250 Inches .0382sq.inches
45.7 Lbs 1760 Lbs 143 Am
s 77.47 7/w 2 6/1 .1052 Inches .316 Inches .0608sq.inches
72.7 Lbs 2800 Lbs 191 Am
a 123.3 7/w 1/0 6/1 .1327 Inches .398 Inches .0968sq.inches
115.7 Lbs 4460 Lbs 256 Am
heim 155.4 7/w 2/0 6/1 .1490 Inches .447 Inches .1221
sq.inches
145.9 Lbs 5390 Lbs 296 Am
erst 195.7 7/w 3/0 6/1 .1672 Inches .502 Inches .1537sq.inches
183.7 Lbs 6790 Lbs 342 Am
nce 246.9 7/w 4/0 6/1 .1878 Inches .563 Inches .1939sq.inches
231.8 Lbs 8560 Lbs 395 Am
e 312.8 19/w 266.8 26/7 .1283 Inches .642 Inches .2456sq.inches
293.6 Lbs 11000 Lbs 460 Am
on 394.5 19/w 336.4 26/7 .1441 Inches .721 Inches .3098sq.inches
370.3 Lbs 13300 Lbs 532 Am
o 465.4 19/w 397.5 26/7 .1565 Inches .783 Inches .3655sq.inches
436.9 Lbs 15600 Lbs 590 Am
en 559.5 19/w 477.0 26/7 .1716 Inches .858 Inches .4394sq.inches
525.2 Lbs 18800 Lbs 663 Am
2/16/2012 | Page 1 of 2
mailto:[email protected]://www.buyawg.com/http://www.buyawg.com/mailto:[email protected] -
8/2/2019 Br AAAC- 6201 Alloy Br Bare Aluminum
2/2
n 652.4 19/w 556.5 26/7 .1853 Inches .927 Inches .5124sq.inches
612.4 Lbs 21900 Lbs 729 Am
740.8 37/w 636.0 26/7 .1415 Inches .991 Inches .5818sq.inches
695.5 Lbs 24400 Lbs 790 Am
ly 927.2 37/w 795.0 26/7 .1583 Inches 1.108 Inches .7282sq.inches
870.4 Lbs 30500 Lbs 908 Am
esults 1 - 14 of 14
yright 2008-2010 American Wire Group, IncRIghts Reserved. 2/16/2012 | Page 2 of 2