Dimensional Drawings

For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting   LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.

12

BOW LX LED

Model Optics Source Current Voltage Mounting Finish OptionsBronze

(BZ)

Black(BK)

Smooth Black(SBK)

White(WH)

Smooth White(SWH)

Graphite(GP)

Grey(GY)

Silver Metallic(SL)

Custom Color(CC)

Kelvin3000K

*Warm white(3K)

4000K*Neutral white

(4K)

5000K*Cool white

(5K)

120-277*Universal

Voltage(UNV)

480(5)

347(8)

Button Type Photocell*Specify voltage.

(PC120) (PC208)(PC240) (PC277)

Photocell & Receptacle*Specify voltage

(PCR120) (PCR208)(PCR240) (PCR277)

Photo Receptacle(PER)

*With shorting cap

Round Pole Plate AdaptorFor 4ӯ Pole (RPP4)For 5ӯ Pole (RPP5)

Motion Sensor*Works with FSP-211

(WSC-8)8’ Mounting Height(WSC-20)

9-20’ Mounting Height(WSC-40)

21-40’ Mounting Height*For BOA Mounting Option Only

This option will require(1) FSIR 100 remote for programing

Pole MountedMotion Sensor

(SBOR OEX)(SBOR ODP)

*w/ photocell

Universal PoleMount Adaptor

(UPMA)*Only available for

BLX-3, BLX-4 & BLX-6

Decorative Shroud(DS)

Back Side Cutoff Louver Shield(CLS)

Right Side Cutoff Louver Shield(RCLS)

Left Side Cutoff Louver Shield(LCLS)

BLX-3

BLX-4

BLX-6

BLX-8

mA

530(5)

700(7)

1000(10)

# Of LEDs96

(96LC)

128(128LC)

192(192LC)

256(256LC)

Knuckle Mount*Slips over 2 3/8” Tenon

with adjustable Incrementsof 10˚(KM)

Bolt-On Arm 6”(BOA6)

Wall Mount(WM)

*BLX-3 & BLX-4 only*PCR & PER not available

AdjustableWall Mount

(AWM)*BLX-3 & BLX-4 only

Bolt-On ArmWall Plate

(BAWP)*BLX-3 & BLX-4 only

Bolt-On ArmWall Plate-XL

(BAWP-XL)*BLX-6 and BLX-8 only

Type I(T1)

Type II(T2)

Type III(T3)

Type IV(T4)

Type IV-A(T4A)

Type V(T5)

Type V-W(T5W)

Type FN(FN)

Type FM(FM)

The new BOW LX LED Series continues the unique contemporary design inspired by the sleek styling of the BOW family. Separating the extruded aluminum driver housing and the individual die-cast aluminum linear LED engines: optimize the life of the LEDs and the Driver(s); and maximizes the lumen output of the fixture. The adjustable knuckle allows for up to 90° degrees of vertical adjustment for putting the light exactly where you need it.

Each of the individual LED light engines come with 32 LEDs; for a max total of 256 LEDs. Nine optical distribution patterns are available.

A unique Type 4-A automotive distribution pattern is available for the front rows of Auto Dealerships. Available in 3000, 4000 or 5000 Kelvin temperature.

A durable polyester powder coat finish is guaranteed for five years; and is available in standard or custom colors.

The BOW LX LED series is an exceptional choice for auto dealerships, shopping centers, commercial parking lots and general area lighting.

AR

EA

AR

EA

A

C

B

BLX-4 Shown with Decorative Shroud

Fixture A B C Max. Watts LbsBLX-3 37” 5” 12” 331 38BLX-4 37” 5” 17” 434 50BLX-6 37” 5” 25” 666 75BLX-8 37” 5” 33” 884 100

Project Name: Catalog Number: Type

19645 Rancho Way Rancho Dominguez, CA 90220Tel: (310) 512-6480 Fax: (310) 512-6486

www.visionairelighting.com

13

BOW LX LED

AR

EA

AR

EA

Housing

• The LED light engines are constructed of heavy-duty, die-cast aluminum, with external heat radiating fins.

Driver Compartment

• The separate driver housing is constructed of extruded aluminum, with vented cast aluminum end covers and stainless steel fasteners; for easy access to the LED driver(s); allowing for cooler operation and longer driver life. One-piece gasketing is utilized throughout the fixture for weather tight operation.

Thermal Management

• The BOW LX Series provides excellent overall thermal management by maximizing the fixture’s heat sink capabilities. This enables the BOW LX Series to withstand higher ambient temperatures and drive currents without degrading LED life.

• The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The BOW LX Series LEDs have been determined to last a minimum of 75,000 hours in 25°C environments when driven at 530 mA.

Optical System

• The highest lumen output, LEDs are utilized in the BOW LX Series. IES distribution Types I, II, III, IV, IV-A, V, V-W, FM and FN are available. LED light engines come in multiples of 32 LEDs.

• CRI values are 70.

Quali-Guard® Finish

• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness. Finish is oven-baked at 400 ºF to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.

Finish is guaranteed for five (5) years.

Mounting

• An adjustable knuckle slip fits over a 2 3/8” Tenon, and allows for up to 90° degrees of vertical adjustment in 10° degree increments from horizontal, as well as full side to side adjustment with the knuckle mount.

• A round extruded aluminum, Bolt -On Arm (BOA) with an in-pole nut plate. A Round Pole Plate Adaptor (RPP) is required for mounting to round poles.

• Wall Mount

• Adjustable Wall Mount

• Bolt-On Arm Wall Plate

• Bolt-On Arm Wall Plate - XL

Electrical Assembly

• The BOW LX Series is supplied with a choice of 530, 700, or 1000 mA high-performance LED drivers, that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 95%. Rated for -40 °C to +55 º C operations.

• 10 kV surge protector supplied as standard.

• 0-10v Dimming Driver supplied as standard.

Warranty

• Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com.

Options

• Button Type Photocell

• Photocell & Receptacle

• Photo Receptacle

• Round pole plate adaptor

• Motion Sensor

• Pole Mounted Motion Sensor

• Universal Pole Mount Adaptor (BLX-3, BLX-4 & BLX-6 Only)

• Decorative Shroud

• Cut-Off Louver Sheild

Listings

• BOW LX Series is UL listed, suitable for wet locations

• LM79 and LM80

• RoHS compliant

• Meets ANSI C136.31-2010 3G Vibration Standards when ordered with

Knuckle Mount

• Powder Coated Tough™

• IP-65 Rated

• DLC Listed

IP65RATED

DesignLights Consortium (DLC) qualified Product. Some configurations of this product family may not be DesignLights Consortium (DLC) listed, please refer to the DLC qualified products list to confirm listed configurations. http://www.designlights.org/

BOW LX Lumen Data *Lumen Data Subject To Change. Lumen Data revised 03.09.17

CCT #LEDs mA T1 lm/w T2 lm/w T3 lm/w T4 lm/w T4A lm/w T5 lm/w T5W lm/w FM lm/w FN lm/w Watts

5000K 96 530 19071 120 17226 109 17725 112 17286 109 19578 123 18561 117 17817 112 19617 122 19405 124 159

700 26966 127 24358 114 25063 118 24443 115 27683 130 26245 123 25193 118 27738 129 27438 130 213

1000 39780 120 35933 109 36973 112 36058 109 40837 123 38717 117 37165 112 40919 122 40476 124 331

128 530 30718 145 27747 131 28551 135 27844 132 31535 149 29897 141 28699 136 31598 148 31256 150 211

700 39038 138 35263 125 36284 129 35386 125 40076 142 37996 135 36473 129 40157 141 39722 142 282

1000 52638 121 47547 110 48924 113 47713 110 54037 125 51232 118 49178 113 54146 124 53560 125 434

192 530 38141 120 34453 109 35450 112 34573 109 39155 123 37122 117 35635 112 39234 122 38809 124 318

700 53931 127 48716 114 50126 118 48886 115 55365 130 52491 123 50387 118 55477 129 54876 130 426

1000 78149 117 70592 106 72636 109 70838 106 80227 120 76061 114 73013 110 80388 119 79518 121 666

256 530 63417 147 57284 133 58943 137 57484 134 65103 151 61723 143 59249 138 65234 150 64528 152 430

700 78648 138 71042 125 73099 128 71290 125 80739 142 76547 134 73479 129 80902 140 80025 142 570

1000 107210 121 96842 110 99646 113 97180 110 110060 125 104346 118 100164 113 110282 123 109088 125 884

Visit www.VisionaireLighting.com for up-to-the-minute chart information, including types not listed here.* For 4000K multiply values by 0.98 * For 3000K multiply values by 0.925

BLX EPA Data

Tilt Deg. BLX-3 BLX-4 BLX-6 BLX-8

0 .7 .7 .8 1.1

10 .71 .9 1.2 1.6

20 1.02 1.3 1.8 2

30 1.32 1.7 2.4 3.1

40 1.62 2.1 3 3.9

50 1.86 2.4 3.4 4.5

60 2.07 2.6 3.8 5

70 2.21 2.8 4.1 5.4

80 2.29 2.9 4.3 5.7

90 2.30 3 4.5 6.1