BOOK 2: Ancillary Products

Unit 6 Guinness Road Trading Estate, Guinness Road, Trafford Park, Manchester M17 1SB

Tel: 0161 876 0400 l www.premiumrs.co.uk l [email protected]

BOOK 2: Ancillary Products



Page 3 Butyl Strips & Beads

Page 4 Cartridge Sealants / Adhesives

Page 5 PVC & Foam Tapes

Page 6 Foam Fillers

Page 7 Pipe Flashings

Page 8 Site Requirements & Accessories



High quality, pressure sensitive butyl sealant manufactured from the latest rubber polymer technology.

Butyl Strips & Sealants

Beads Strips Typical Applications

4mm x 12m 6x5mmx9.6m Metal Side & End Laps

6mm x8m 9x1.5mmx30m Metal Liner Side & End Laps, Bedding

Fillers

8mm x 6m 9x3mmx15m Metal Side & End Laps

10mm x5m 12x3mmx15m End Lap Applications

24x3mmx15m End Lap Applications

50x3mmx15m Gutter / Capping Joint Seal

50x6mmx5m Gutter Joint Seal

50x1mmx15m Metal Liner Panel Side / End Laps

(Applied on top of laps)

Typical Applications

Liner Panel Side / End Laps

A/C & Metal Side / End Laps

A/C Side / End Laps

Rooflights

Bedding Trims & Roof Vents,

Compression Joints

Further Sections available from stock



Cartridge Sealants / Adhesives

Colours

Clear

Mid Grey

Black

White

Anthracite

Terracotta

Other Colours

Available

Butyl Rubber

Sealants

Grey

Black

White

Fix All High Tack Invisible

Super strong clear adhesive with high initial tack and end

strength (320kg/10cm²). Based on SMX Polymer Technolo-

gy, High Tack Invisible offers high performance flexible

bonding of all types of materials onto almost any surface,

both porous and non-porous, even if wet or humid.

Fix All TURBO

Super fast curing adhesive with exceptional ?nal bond

strength. Based on SMX Polymer Technology, Turbo has

rapid strength build-up after 20 minutes. Final bond strength

achieved in 3 hours. For all types of bonding applications,

onto all types of surfaces, even wet or humid non-porous

Silicone Sealants

General purpose,

low modulus, neutral

cure silicone seal-

ant.Very fast skin-

ning time and ?nal

cure. Excellent

toolability. Primer-

less adhesion on

most common con-

struction materials.

Resistant to UV,

rain, snow.

Butyl Sealants

Polybutene based

sealant which can

be painted 24 hours

after application. Ex-

cellent adhesion on

most construction

surfaces. Self repair-

ing (forms a skin, but

remains uncured

below the skin). For

static and low move-

Expanding Foam

FIRE RATED one component, expanding polyurethane foam ?ller. Rapid curing. Excellent thermal and acoustic insulation properties.

Expands 35-40 times its initial volume. Excellent primer-less adhesion on most construction materials. Available in Hand Held, Gun Grade DuraValve and Click & Fix® versions. Con-forms to all international standards.

Also available in Standard Expanding Foam.



PVC & Foam Tapes

Reinforced PVC Cloth Tape

Black 50mm,75mm,100mm

White 50mm

PVC Barrier Tape

Black 50mm,75mm,100mm

White 50mm

Aluminium Foil Tape

Silver 50mm,75mm,100mm

Other sizes / colours available

PVC Foam Tape

PVC foam sealant tapes are manufac-

tured from expanded PVC in a range

of densities. They are essentially

closed cell structures coated with a

pressure sensitive acrylic adhesive

and require 30% compression to cre-

ate a water seal.

They are available in a variety of

widths and depths from stock.

Expanding Foam Tape

BG1 is a pre-compressed sealant

made of impregnated, permanently

elastic, ?ne-cell soft polyurethane

foam.

• Expands slowly and evenly

• Bridges extreme joint tolerances

Various stock sizes available

Various Block Sections Trisomet 333 Tackdeck

Standard 3” Coverworld TAC

WA6—38/914 Heyshaws Uniclad

Big 6 Kalzip

Euroclad 32/1000 Kingzip

CA 17/1000 Ash & Lacy

CA 32/1000 Norclad

KS1000RW Rigidal

PMF Speeddeck

Corus Steadman

Pro?led Foam Fillers & Blocks

A full range of pro?led and block section ?llers

available from stock in Pairs, L/flute, S/flute

(example stocks below.)

Raked and non-stock ?llers are generally on a 2-3

day delivery.



Pipe Flashings

Our range consists of flashings are for metal, plastic, glass, tile and slate roofs, making virtually any penetration through any roof type watertight. Your ?rst choice for a purpose made, watertight, lead-free flashing solution.

EPDM Rubber will operate between -50° to 115° constantly and up 150° intermittently (30 mins or less)

Silicone will operate between -50° to 200° con-stantly and up to 250° intermittently (30 mins or less).

Used to seal penetrations from 5mm to 760mm,

on both domestic and commercial buildings. Com-

mon applications include Chimney Flues, Spiral

Ducting, Fume & Dust Extraction, Solar Panels,

Soil Pipes, Fall Protection Systems, Signage

Frames and more.



Site Requirements & Accessories



A complete range of every day site consumables

are available from stock to collect or for next day

delivery.

This is only a sample of the huge range we hold

so if you don’t see what you need, please call us.

BOOK 2: Ancillary Products

Documents

Transcript of BOOK 2: Ancillary Products