BONT Level Gaugebont-technus.com/wp-content/uploads/2018/06/BONT-Level-Gauge-1.pdf · Parts Name...
Transcript of BONT Level Gaugebont-technus.com/wp-content/uploads/2018/06/BONT-Level-Gauge-1.pdf · Parts Name...
Level Gauge
http://bont-technus.com/
Reflex Level Gauge
http://bont-technus.com/ 1
Model NX CC min
NY CC min
D
V +2/0
C
13 14 15 16 17 18 19 24 25 26 27 28 29 36 37 38 39 47 48 49 57 58 59 68 69 79
285 310 340 370 400 440 460 515 575 635 695 775 815 900 990
1110 1170 1285 1445 1525 1580 1780 1880 2115 2235 2590
246 271 301 331 361 401 421 474 534 594 654 734 774 857 947
1067 1127 1240 1400 1480 1533 1733 1833 2066 2186 2539
178 203 233 263 293 333 353 406 466 526 586 666 706 789 879 999
1059 1172 1332 1412 1465 1665 1765 1998 2118 2471
141 166 196 226 256 296 313 367 427 489 549 628 668 751 841 961
1021 1134 1294 1374 1427 1627 1727 1960 2080 2433
165 190 220 250 280 320 340 190 220 250 280 320 340 250 280 320 340 280 320 340 280 320 340 320 340 340
123456789
Safety Clamps Upper Gasket Reflex Glass Lower Gasket Level Body Cover Plate Tightening Bolts Bolts Nipples
SS316L Asb/Free Borosilicate Graphite SS316L SS316L SS316L Grade 8.8 Zinc. SS316L
Connections between gauges and cock are: -NX type = by end tubes and stuffing boxes -NY type = by nipples screwed The lever cock handles can be put on RIGHT or LEFT hand position In case of order please confirm: -Center to Center -Size and connections -Handlever position -Pressure and Temperature -Fluid -Optional Our STD flanges = PN40 / DN20 Glasses STD type A = SIZE 30mm (Optional B type glass) Regarding operation conditions please check on the table CDE
Transparent Level Gauge
http://bont-technus.com/ 2
12345678
Bolt Nut Cover Upper Gasket Reflex Glass Lover Gasket Level body Nipples
B72HC.S.Asb/Free Borosilicate Graphite C.S.S.S.
B72HS.S. Asb/Free Borosilicate Graphite S.S. S.S.
Mis.
NX INT. min.
NY INT. min.
D V +2/0
C
11 235 196 128 91 11512 260 221 153 116 140 13 285 246 178 141 165 14 310 271 203 166 190 15 340 301 233 196 22016 370 331 263 226 250 17 400 361 293 256 280 18 440 401 333 296 320 19 460 421 353 313 340 24 515 474 406 367 190 25 575 534 466 427 220 26 635 594 526 469 250 27 695 654 586 549 280 28 775 734 666 628 320 29 815 774 706 668 340 36 900 857 789 751 250 37 990 947 879 841 280 38 1110 1067 999 961 320 39 1170 1127 1059 1021 340 47 1285 1240 1172 1134 28048 1445 1400 1332 1294 320 49 1526 1480 1412 1374 340 57 1580 1533 1465 1427 280 58 1780 1733 1665 1627 320 59 1880 1833 1765 1727 340 68 2115 2066 1998 1960 320 69 2235 2186 2118 2080 340 79 2590 2539 2471 2433 340
Connections between gauges and cock are: -NX type = by end tubes and stuffing boxes -NY type = by nipples screwed The lever cock handles can be put on RIGHT or LEFT hand position In case of order please confirm: -Center to Center -Size and connections -Handlever position -Pressure and Temperature -Fluid -Optional Our STD flanges = PN40 / DN20 Glasses STD type A = SIZE 30mm (Optional B type glass) Regarding operation conditions please check on the table CDE On request cover and bolt in Stainless steel
BI-Color Water Level Gauge
http://bont-technus.com/ 3
These level gauges are particularly suitable for liquids: - Colorless - Very Fluid - Non-corrosive for glasses (e.g. ammoniacal solutions, trichlorethylene, water steam up to 32bar and higher pressure is upon request etc.) Bi-colour level gauge will parallel glasses. Working Principle: It is a variation of transparent level gauge, however equipped with two reflex glasses and a back illuminator, fitted with suitable coloured fitters. The reading is given by the contrast between the bright colour (usually:red) of fitters in the lower part containing liquid and the colour of upper part of visible window. The drawing shows a typical Reflex Glass Level Gauge. This instrument consists of a metal body, machined to have an internal chamber and one or more front windows (on one side only of the gauge). On each window a special high resistance plate reflex glass is fitted with sealing joint and metal cover plates hold by bolts and nuts. The chamber is connected to vessel with cross fittings and flanged, threaded or welded ends. Usually, between the instrument and its connecting ends, valves are fitted to consent shut-off piping and to disassemble the level gauge without to empty the vessel. Drain valves can also be fitted to cross fittings device. To avoid leakage in case of glass breakage, safety ball-check device can be provided. Working Principle: Reflex level gauges working principle is based on the light refraction and reflection laws. Reflex level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90°. When in operation, the chamber is fil led with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and in the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night an artificial light must be provided. The different brightness in the two zones is obtained as explained below: Size C to C distance Length
of body
Visible
length
Length
of glass
Weight
NX NY
CC min CC min B V G kg
1
2
3
272
297
322
221
246
271
165
190
215
93
118
143
115
140
165
12.30
13.10
14.20
4
5
6
347
377
407
296
326
356
240
270
300
188
198
228
190
220
250
15.00
16.30
17.307
8
9
437
477
497
386
426
446
330
370
390
258
298
318
280
320
340
18.40
20.00
20.752x4
2x5
2x6
552
612
672
501
561
621
445
505
565
373
433
493
190
330
250
22.35
25.00
27.10
2x7
2x8
2x9
732
812
852
681
761
801
625
705
745
553
633
673
280
320
340
29.25
32.20
33.85
3x6
3x7
3x8
937
1027
1147
886
976
1096
830
920
1040
758
848
968
250
280
320
36.75
40.10
44.65
3x9
4x7
4x8
1207
1322
1482
1156
1271
1431
1100
1215
1375
1028
1143
1303
340
280
320
47.15
50.85
57.00
4x9
5x7
5x8
1562
1617
1817
1511
1566
1766
1455
1510
1710
1383
1438
1638
340
280
320
60.10
61.65
69.35
5x9
6x8
6x9
1917
2152
2272
1866
2101
2221
1810
2045
2165
1738
1973
2093
340
320
340
73.20
81.70
86.307x9 2627 2576 2520 2448 340 99.45
Magnetic Level Gauge
http://bont-technus.com/ 4
A-measurement according to customer requirement for STD. constructor L-center to center Dimension float container: Inside 55.8 mm- outside 60,3 mm. Material Available = Stainless Steel AISI 316L/Titanium/Plastic Material for magnetic flag chamber = Aluminium or Stainless Steel Optional: Magnetic level indicator complete of valves interceptor [ globe, plug, ball ] Drain and vent valves [ globe, plug, ball ] whether in F316L/316L or A105N
Tobular Level Gauge
http://bont-technus.com/ 5
V = INT. – 90mm
** If V dimensions more then 3000mm then a middle connection will be fitted.
Spare = INT. – 20mm
Connection Between gauges and cock are: -NX type = by end tubes and stuffing boxes The lever cock handles can be put on RIGH or LEFT hand position. Ordering information requires: Center to center Size & connections Hand lever position Media/Fluid Optional requirement Standard Flange Connection: 1” PN40 Glass Tube size: Ø 16 x 2.5 Thickness x Length (depend on CTC) (mm) Operating conditions please refer to Table CDE Option: Stainless Steel Metallic Glass Protector (On request)
1. Nut : 2H 2. Bolt : 8.8 3. Tube protection : Ferrozincate (Metal zincated) 4. Glass Tube : Borosilicate 5. Gasket : Rubber
Note: Bolt & nut B8/A4 for critical conditions
Design: Doniselli V. Controller: Pirola O. Scale: NTS Revision: 00 Design No: 00000145 Date: 08th Oct 2004
Tubular Level Gauge
Glass Tube Level Gauge
http://bont-technus.com/ 6
Specification: Parts Name Material Bronze SS304 Body Bronze SS304 Stem Bronze SS304 Seat PTFE PTFE Ball Bs811 SS304 Gland Bs811 SS304 Gland Packing Asbestos PTFE PTFE Packing Nut Bs811 SS304 Gauge Packing Neoprene Graphite Handle ZDC2 SS304 Test Pressure:- Water Water Body Max Pressure 230PSI 400PSI Seat Max. Pressure 100PSI 150PSI Protector Shield Mild Steel SS304
Dimension (mm)
Size (Inch) (mm)
½ x ½ 15 x 15
½ x ⅝ 15 x 17.5
¾ x ¾ 20 x 20
L End to End 57 57 72 H Height 63 63 71 I Handle 53 53 58
Specification: Parts Name Material Body SS304 Stem SS304 Seat PTFE
403SS llaBGland SS304 Gland Packing PTFE Packing Nut SS304 Gauge Packing Graphite Handle SS304 Test Pressure:- Water Body 400PSI Seat 150PSI
Dimension (mm)Size (Inch) (mm)
½ x ½ 15 x 15
½ x ⅝ 15 x 17.5
¾ x ¾ 20 x 20
L End to End 66 77 80 H Height 85 97 98 I Handle 76 76 76
Bronze Material:
SS304 Material :
Level Gauge Cock
http://bont-technus.com/ 7
N° Descrizione / Description Materiali / Materials Materiali / Materials 1 Bullone / Bolt B7 B82 Dado / Nut 2 H G r83 Rondella / Washer UNI 6592 ACC. I NO X / S. steel 4 Corpo / Body A 10 5N F 316L5 Maschio F18 / Plug F18 A316 A3166 Anel lo F18 / Ring F18 A316 A3167 Bossolo F18 / Packing Sleeve s F18 Grafite / Graphite Grafite / Graphite 8 Ta ooo premi bossolo F18 / Stuffing box F18 Acc / C / c.steel ACC. I NO X / S. steel
9 Manig lia G R. / Big cock hanfle Acc / C / c.steel Acc / C / c.steel 10 Manop ola G R. / Big cover handle Nylon 66 Nylon 6611 Spirome tal ic F 316 / Graphite F 316 / Graphite 12 Anel lo di serrag gio / Ring thickness A316 A31613 Ta ooo oremi bossol o F12 / Stuffing box F12 Acc / C / C. steel ACC. I NO X / S. steel 14 Maschio F12 / Plug F12 A316 A31615 Bossolo F12 / Packing sleeve F12 Grafite / Graphite Grafite / Graphite 16 Gua m. / Gasket Grafite / Graphite Grafite / Graphite 17 Tu betto diconn. / connection pipe Acc / C / C. steel ACC. I NO X / S. steel 18 Manig lia PR. / Little cock handle Acc / C / C. steel Acc / C / c.steel 19 Manopola PR. / Little cover handle Nylon 66 Nylon 6620 Ghiera scarico / Drain cock cover Acc / C / C. steel ACC. I NO X / S. steel 21 Rub. Di sca rico / Drain cock cover A10 5N F 31622 Gh iera di racco rdo / Connections cover Acc / C / C. steel ACC. I NO X / S. steel 23 Anel lo premib ossolo / Stuffing box ring Acc / C / C. steel ACC. I NO X / S. steel 24 Bossolo F16 / Packing sleeves F16 Grafite / Graphite Grafite / Graphite 25 Flangetta / Stuffing box body A10 5N F 31626 Bullo ne / Cap screw UNI 5739 UNI 573927 Rond ela / Waher UNI 6592 UNI 659228 Anel lo F12 / Ring F12 A316 A316
Connection type NX = by end tub e and stuffing boxes Vessel connection: Integral flanges U NI / DIN PN 10-16 - 2 5-4 0 ( DN15 > DN 50 ) Integral flanges ANSI 150RF / 300RF / 600RF -RJ / ANSI 900 -1 500RF -RJ ( DN1/ 2'' > DN 2'') Screwed as NPT / BSP( Mal e - Fe mal e) Socked weld Optional Packing sleeves PT FE Safety ball release Ns. Fig.31 ( in case of glass breaking)
Level Gauge Glass
http://bont-technus.com/ 8
Reflex & Transparent Gauge Glass according to DIN 7081
Size Type A Type B
Length(l) Width(w) Thickness(h) Length(l) Width(w) Thickness(h) mm mm mm mm mm mm
1 115 30 17 115 34 17 2 140 30 17 140 34 17 3 165 30 17 165 34 17 4 190 30 17 190 34 17 5 220 30 17 220 34 17 6 250 30 17 250 34 17 7 280 30 17 280 34 17 8 320 30 17 320 34 17 9 340 30 17 340 34 17
10 370 30 17 370 34 17 11 400 30 17 400 34 17
Level Gauge Glass
http://bont-technus.com/ 9
Sight Glasses according to DIN 7080
Dimension (OD x Thk)
Max.Working Pressure
(Bar) 30 x 15 200 35 x 7 25
40 x 12 5045 x 10 4045 x 12 5050 x 10 2550 x 12 40 55 x 10 25 60 x 10 16 60 x 12 25 60 x 15 40 63 x 8 8
63 x 10 16 63 x 12 25 63 x 15 40 70 x 12 55 70 x 15 55 80 x 10 65 80 x 12 65 80 x 15 6580 x 20 6590 x 10 70
Dimension (OD x Thk)
Max.Working Pressure
(Bar) 95 x 15 16
100 x 10 7 100 x 15 16 100 x 20 25 100 x 25 40 125 x 15 10 125 x 20 16 125 x 25 25 125 x 30 40 135 x 25 25 150 x 15 8 150 x 20 10150 x 25 16150 x 30 25175 x 20 10175 x 25 16 175 x 30 25 200 x 20 8 200 x 25 10 200 x 30 16 250 x 25 8 250 x 30 10 265 x 30 8
Level Gauge Gasket & Packing
http://bont-technus.com/ 10
Level gauge parts to be services on time to prevent damage on main instruments. E.g parts including:
• Gauge glass • Precut gasket • Packing sleeve AB12, AB16, AB18 (std) • Gland ring KU16 • Mica (for high temperature)
Application Worksheet :
http://bont-technus.com/ 11
Please fill up the following particular and send back to us as soon as possible.
1. Company Name : _____________________________________________
2. Message From : _____________________________________________ 3. Phone Number (TEL) : _____________________________________________ 4. Fax Number (TEL) : _ ___________________________________________ 5. E-mail address : _____________________________________________
6. Project Reference : _____________________________________________
Services Conditions
•
•
•
•
Medium through Liquid
Application
Medium
Temperature in degree C
:
:
:
Operating : Max : • Pressure in Kg/cm2 or Bar Operating : Max : • Center to center in mm Distance : • Eluminator Include: ¨ Yes ¨ No Voltage : • Connection Flange or Screw end to • No of Gauge Glass : with Size: _ • Gauge glass type : ¨ Reflex ¨Transparent • View : ¨ Single side ¨ Double side • Gauge cork : Material: Connection: • Additional comment or special request:
SYSTEMINTEGRATION
Total Boiler Control System
Deaerator Control System
Sterilization Control system
BPV Control System
Digester Control System
Dilution Control System
Claybath Control System
Thank Gauging Control System
Plant Wide Automation
Water Work Distribution System
Waste Water Control System
SYSTEM INTEGRATION
PALM OIL INDUSTRIES
WATER WORK INDUSTRIES
Continuous Emission Monitoring System (CEMS)
Water Quality Monitoring System (WQMS)
GENERAL INDUSTRIES
+6221 651 9188 +6221 651 6107 [email protected]
PT BONT TECHNOLOGIES NUSANTARAKomplek Rukan Sunter Permai Blok C No. 9Jl. Danau Sunter Utara, SunterJakarta Utara 14350 Indonesia