Boge Screw Usa

SCREW COMPRESSORS

BOGE AIR. THE AIR TO WORK.

For more than three decades BOGE screw compressors

“Made in Germany” have stood the test of time: in

industry and trade – from the one-man workshop to

the automotive industry and the large refi neries. Today,

BOGE screw compressors have much more to offer

than just compressed air: state-of-the-art technology, a

modular design concept and maximum energy effi ciency

ensures that they meet the high reliability and effi ciency

standards customers have come to expect from BOGE.

Over 100,000 compressed air users

expect more when it comes to their

compressed air supply.

BOGE air provides them with

the air to work.


Screw Compressors

3

CONTENTS

SCREW COMPRESSORS 4

BOGE C SERIES 16

BOGE S SERIES 24

BOGE SERVICE 33

4 BOGE AIR. THE AIR TO WORK.

Nature does not waste energy.

Our screw compressors are also built

using this principle.

COOLINGAIRFLOW

Gravity

Thermal

Intelligent engineering from BOGE: The three main sections of the BOGE screw compressor

(electrics & drive, compressor, independent cooling unit) are strategically aligned in the

main cooling air fl ow: for maximum effi ciency and service life.

DRIVE

ELECTRONICSAIREND

COOLING

SECTION

Screw Compressors

5

Warm air rises: Our engineers harnessed this

simple law of physics in order to make BOGE

screw compressors even more effi cient and to

prolong their service life. Cooling air is taken in

at the lowest point in the package by a separate

cooling air fan and is drawn over the component

parts upwards before leaving the compressor at

the highest point – our so called chimney effect.

This main cooling air fl ow is many times higher

than the actual cooling air fl ow of the integrated

motor fan. Due to chimney principle, the system

keeps cooling even during load reversal.

Effi ciency advantage: The intake fi lter is

positioned in the coolest part of the cooling

airfl ow and takes in the air for compression

at the lowest temperature. This results in an

optimized volumetric effi ciency and output from

the compressor. The air/oil cooler, on the other

hand, is positioned at the top of the compressor.

The cooler is generously dimensioned and, in

conjunction with the cooling airfl ow, provides for

the lowest possible internal cabinet temperature

as well as discharge compressed air temperature.

When connected directly to ducting, the cooling

air can be removed without any problems or

recovered and easily redirected to supplement

space heating.

Service life advantage: Motor, switch cabinet

and all electric components are positioned

at the intake of the main cooling airfl ow and

benefi t from the coolest air. As a result these

components do not overheat either in load or

in idle mode which means their service life is

extended considerably. There are no heat sinks

within the cabinet in either operating mode.

Effi ciency made easy: According to our engineers, the design of the

BOGE screw compressor is very much based on the principles of nature.

High outputs, effective oil separation, and an extremely long service life

of the component parts ensure that energy consumption is optimized.

THERMAL ADVANTAGE: THE BOGE COOLING AIR FLOW.

Oil always fl ows to the lowest point:

Therefore our engineers have positioned the oil

pre-separator horizontally at the lowest point of

the system. Also due to rapid reduction of the

compressed air speed after compression bulk oil

”rains” from the compressed air into the reservoir

– a most effi cient form of oil pre-separation.

Effi ciency advantage: The BOGE oil separation

system is designed to minimize internal pressure

losses and to ensure a residual oil content of

1-3 ppm in every operating phase. The

horizontal combi-tank ensures a low foam level

at load reversal virtually eliminating the risk of

bulk oil reaching the separator cartridges.

Long-life service advantage: BOGE oil

separator cartridges have a long service life –

not only as a result of the highly effective oil

pre-separation but also because of the large

safety distance between the oil surface and the

separator that prevents the oil from migrating

into the separator cartridge.

GRAVITY ADVANTAGE: THE BOGE OIL SEPARATION SYSTEM.


Quality in its most effi cient form:

The BOGE airend.

The heart of every BOGE screw compressor:

The reliable and effi cient airend.

Screw Compressors

7

Everything is cutting edge: The BOGE airend is the heart of the BOGE

screw compressor. Engineered to exacting tolerances, the BOGE airend

combines quality and effi ciency with long service life making it one of

the best of its kind and a sound, long-term investment for our customers.

Maximum reliability

BOGE airends are manufactured on state-

of-the-art production lines and are examples

of the fi nest German engineering. Lowest

manufacturing tolerances combined with quality

materials ensures the dependability of each

airend. Computer controlled testing further

ensures that every single airend meets our high

quality standards. The longest possible service

life is also assured thanks to generously

dimensioned axial and radial bearings.

Suction end

Discharge end

Suction end

Discharge end

Discharge end

1

2

3

Suction end

Discharge end

Suction end

4

Maximum effi ciency

The screw profi le of the BOGE airend has

been optimized using the latest technological

advancements providing maximum effi ciency

over the entire service life. We calculate the

best possible specifi c power characteristics

of each airend to ensure the best output per

kW or HP while ensuring the airend continuously

operates at its optimal speed.

PREMIUM QUALITY MADE IN GERMANY

1 Intake:

The air passes through the intake opening into the rotors that are open on the suction side.

Compressing:

As the screw rotates the air intake opening closes. The volume in the chambers is reduced

and pressure increases. During this procedure, oil is injected to lubricate the rotor bearings,

to seal the rotors, and to dissipate the heat of compression.

Discharge:

Compression is completed, fi nal pressure is reached, and discharge starts.

2 3

4

THE COMPRESSION PROCEDURE


The BOGE control and monitoring concept is

your key to more effi cient operation. We have

the optimal control system for every type of

application: from monitoring central machine

parameters to specifi c synchronization of up

to 16 different compressors.

Optimized output:

BOGE compressor controllers.

FOCUS

FOCUS is the latest state-of-the-art energy

effi cient controller to come from BOGE. A

large-scale LC display clearly shows error and

maintenance messages, operating states and all

operating parameters. (Additionally the operating

status of a frequency controlled compressor

and/or the workload of fi xed speed compressors

are displayed).

Synchronized output:

BOGE Master controllers.

TRINITY

With the trinity controller from BOGE you can

control up to three compressors of equal or

different size or implement an automatic base

load switching control. The adjustable base

load switching cycle enables a constant load

operation of all the installed compressors. trinity

can be installed into the compressor switch

cabinet or provided as a separate wall mounting

cabinet version.

AIRTELLIGENCE

airtelligence is designed to control up to

16 compressors of different makes and sizes

in a multi-compressor system. It operates

by selecting the appropriate compressor

combination to meet the compressed air

demand and to profi ciently confi gure your

system to ensure best possible operating

INTELLIGENT CONTROL

Energy prices cannot be controlled.

But energy effi ciency can.

effi ciency: load/idle run switch cycles are

minimized and expensive idle run times virtually

eliminated. airtelligence: For a cost-effective and

safe operation!

AIRTELLIGENCE PROVIS

Seeing is believing: airtelligence PROVIS

synchronizes up to 16 compressors and

visualizes the central parameters. As a result

energy costs can be closely monitored via an

interface to a web server where you can view

this data at anytime and anywhere around the

world.

Screw Compressors

9

remodeling or design related modifi cations.

All pressures and intermediate pressures are

available with the best possible outputs.

It takes little or no investment for a compressed

air user to save as much as 30 percent of their

compressed air related energy costs. Be sure

to take advantage of BOGE’s energy effi ciency

solutions to save energy costs. Examples:

Leak detection

A single 1/4" diameter leaking hole causes

losses of 122 cfm – this equates to several

thousand dollars a year of energy costs.

Comprehensive leak detection from BOGE

will identify any leaks within your compressed

air network.

Heat recovery

Most of the energy used to generate

compressed air is rejected in the form of heat.

This heat can be recovered: e.g. for space

heating or for the heating of domestic water.

Up to 85 percent of the input electrical energy

can be recovered: Our energy experts will be

pleased to advise you!

AIReport

Does your compressor station still meet your

specifi c site requirements? Oversized or obsolete

components can be the source of high energy

costs. The AIReport system helps to detect weak

points within a compressed air system by

monitoring compressed air generation, treatment

and distribution over a set period of time (e.g.

one week, two weeks or even a month): this tool

will help you save energy!

INTELLIGENT SAVINGS

Energy costs need not go off course: because BOGE’s energy effi ciency solutions

offer a number of options that save energy. It is calculated that energy costs account

for around 75 percent of the lifetime costs of compressed air generation. This makes

energy optimization essential for any compressed air user. Signifi cant sustainable

savings can be created by continually auditing and optimizing your installation.

You should therefore rely on a partner who, as an energy expert, is ready and able

to support you before and after your decision to purchase compressed air products.

Welcome to BOGE!

Perfectly controlled output: BOGE

frequency controlled screw compressors

When there is a fl uctuating compressed air

demand, the BOGE frequency controlled screw

compressors works strictly in accordance with

the compressed air demand by producing the

exact volume of compressed air at the pressure

required.

The volume fl ow is continually adjusted between

25 and 100 percent – correctly specifi ed

frequency controlled compressors should

eliminate expensive idling times and even out air

demand fl uctuations. Energy costs can therefore

be reduced considerably.

When a frequency controlled compressor is used

alongside a fi xed speed compressor additional

advantages can be achieved. The fl exible speed

adaptation of the airend also allows for pressure

adaptation. Changing the pressure value of the

frequency compressor automatically

synchronizes the output quantity. A 190 psig

machine can therefore be transformed into a

125 psig machine yielding a correspondingly

higher output – without any expensive

The BOGE sign for effi cient compressed air

solutions: Wherever it is displayed, users can

be assured of a particularly effi cient BOGE

solution helping to save a great deal of money!

Savings potential of up to 30 %

is possible

with a frequency controlled

compressor:

• minimized idling time

• pressure reduction

• load cycles virtually eliminated.


Why don’t our compressors cost less?

Because our customers can‘t afford that.

QUALITY PAYS OFF

Purchase costs represent only a small portion of a compressors life cycle investment costs. Because BOGE compressors are designed

to provide trouble-free and effi cient operation for a long period of time, they are in many cases the most cost effective solution below

the line. It is therefore not without good reason that users around the world increasingly rely on premium quality made by BOGE!

investment costs

approx. 15 %

Your BOGE advantage: More than a third of potential savings with regard to energy and maintenance costs are due to high quality components and effi cient solutions!

maintenance and repair

approx. 10 %

energy costs

approx. 75 %

Screw Compressors

11

German engineering

The use of high quality materials and a reduced

number of wearing parts makes the BOGE product

as effi cient and reliable as our demanding

customers rightfully expect. The entire BOGE

production process is subject to permanent

quality control – from inspection of incoming

material to fi nal inspection and testing – with

all positions closely monitored by experienced

quality offi cers. And when it comes to product

development, BOGE ranks among the fi rst for

German engineering: Repeatedly our innovations

are considered as industry trendsetters and are

often protected by Worldwide patents.

Strict guidelines

The prototypes of newly developed BOGE

products are subjected to all kinds of practical

tests. For example fatigue tests under extreme

conditions are carried out to determine the

product‘s readiness for the market prior to

release for series production. No BOGE product

leaves the Bielefeld facility without completing a

personal fi nal inspection protocol. This document

has to be signed off by our employee.

Permanent optimization

All BOGE products are subject to permanent

quality audits and assessed according to the

latest industry standards and practical

experience – which translates into continuous

improvement for the benefi t of our customers.

You are welcome to contact our energy effi ciency

experts for more details on how to realize

additional savings potentials in your compressed

air system. Use the BOGE AIReport or carry out

leak detection in order to save ready cash:

Please do not hesitate to contact us!

Industry and Trade deserve quality solutions: And, our customers have come to

rely on BOGE for uncompromising quality and intelligent engineering “Made in

Germany”. More than 100,000 compressed air users around the world know

that such values pay off in the long run: because a reliable, effi cient and durable

supply of compressed air is paramount to the operation of their business.


Compact experts

The BOGE C series:

Screw compressors compact as never before: All components in one module –

extremely silent and fl exible, extendable for small and medium compressed air demands.

Screw Compressors

13

Powerful specialists

The BOGE S series:

Powerful, effi cient and reliable screw compressors for medium and

bigger compressed air demands – extendable due to modular design.


Compressed air with a method:

Modules of BOGE screw compressors.

Screw compressor

Compressed air receiver Refrigerant dryer Frequency control

ADVANTAGES OF THE COMPACT MODULAR DESIGN:

• Flexible combination possibilities

• Unit completely ready for connection

• Minimum fl ow losses due to compact construction

• High-quality piping protects against leakages

Screw Compressors

15

Modular design, compact system: Because of the modular design BOGE

screw compressors allow for individual confi guration of your compressed

air system. Each compact module is pre-assembled and ready for use:

for effi cient and reliable operation in all types of applications.

PERFORMANCE OVERVIEW OF THE S SERIES

HP

20

15

10

7.5

5.5

4

3

kW

15

11

7.5

5.5

4

3

2.2

HP

480

430

340

270

220

180

150

125

100

90

75

60

50

40

30

25

20

15

10

kW

355

315

250

200

160

132

110

90

75

65

55

45

37

30

22

18.5

15

11

7.5

S

15

10

S

29-2

24-2

20-2

S

60-2

50-2

40-2

S

100-2

75-2

61-2

S

150

125

101

S

220

180

151

SF

150

SF

29-2

24-2

SF

15

SF

100-2

SLF

75

61

51

40

30

SLF

125

101

frequency controlled

frequency controlled

PERFORMANCE OVERVIEW OF THE C SERIES

C

9

CL

20

10

7.5

5

4

CL-

20

10

7.5

5

4

CLD-

20

10

7.5

5

4

SLF

271

221

S

341

271

SF

60-2

40-2


Compressor output more

space saving than ever:

Design advantages of the BOGE C series.

THE CM COMPACT MODULE:

All necessary components are integrated into the airend block. Maintenance and wearing

parts are easily accessible – for maximum comfort and highest operational safety.

Integrated oil separating system

Both oil separating cartridge and oil fi lter

cartridge are easily accessible: for maintenance

purposes only the cover needs to be opened.

The oil sump is located at the lowest point: for

effective pre-separation according to the gravity

principle.

Multifunctional intake control with

integrated solenoid valve for functionally

reliable operation without leakages.

Silenced intake fi lter with

paper fi lter cartridge

The fi lter separates 99.9 percent of all particles

larger than 3 µm: assuring high quality

compressed air right at its source.

BOGE airend with special BOGE

profi le and HD bearing

The specially designed airend is characterized

by its high output and low energy consumption.

Temperature sensor

CNC machined cast iron housing

High quality machining eliminates the risk

of leakage. The heavy cast iron housing also

serves to reduce noise right at the source. Thermo-static oil level regulation

Easily accessible from the outside.

* Minimum

pressure / check

valve

Integrated design

eliminates piping

– for maximum

leakage safety.

Minimum pressure /

check valve*

C Series Screw Compressors

17

Flexible drive

The C series compact module can be supplied

with a drive of your choice – direct drive or belt

drive. You are welcome to contact us to work out

an optimal solution to meet your requirements!

Electric motor drive (50 or 60 Hz)

Hydraulic drive

Combustion engine

Cardan shaft (universal joint)

Compact is fi rst class: Due to their compact design, C series screw

compressors are ideally suited for small spaces – optimal for use in

stationary machines or for mobile use in vehicles. There are a number of

possible options – from variable drives to dryers and frequency control –

our machines can be individually confi gured to meet most requirements.

Very quiet in operation! Really, you can scarcely hear them: an intelligent

compact system to meet the most demanding installation requirements.

COMPACT DESIGN

Integration of all essential components

eliminates the need for interconnecting pipes.

Leakages are virtually eliminated. Pressure

losses are minimized.

EXTREMELY SILENT

The C series is very quiet in operation and

absolutely vibration less. Because of the sound

adsorbing graphite cast no further silencing is

required.

INTELLIGENT LAYOUT

All maintenance and wearing parts are easily

accessible from the outside via a single cover

– allowing fast and trouble-free maintenance.

From CL 10 available with exterior oil separator

cartridge.


Compact module CMCompact module with

different drive options

Screw compressor CLCompact screw compressor

Effective free air delivery:

12 – 106 cfm, 0.34 – approx. 3 m³/min

Pressure range: 75 – 190 psig, 5 –13 bar

Motor range: 3 – 29 HP, 2.2 – 22 kW

Effective free air delivery:

11 – 77 cfm, 0.310 – 2.17 m³/min

Pressure range: 125 and 150 psig, 8 and 10 bar


Compact module CM

Screw compressors CL 4 to CL 20


19

BOGE

Model

Max. pressure Effective free

air delivery* 60 Hz

Motor power Dimensions

W x D x H

Weight

psig bar cfm m3/min HP kW inches lbs.

CL 4 150 10 11 0.31 4.0 3.0 3-phase 30 x 19 x 19 243

CL 5 150 10 14 0.40 5.5 4.0 3-phase 30 x 19 x 19 276

CL 5 150 10 14 0.40 5.5 4.0 single-phase 33 x 19 x 19 287

CL 7.5 125 8 30 0.85 7.5 5.5 3-phase 30 x 19 x 19 287

CL 7.5 125 8 30 0.85 7.5 5.5 single-phase 33 x 19 x 19 298

CL 10 150 10 36 1.03 10.0 7.5 3-phase 46 x 23.5 x 23.5 573

CL 20 150 10 77 2.17 20.0 15.0 3-phase 52.5 x 24 x 25.5 661

* Free air delivery for the complete package in accordance with ISO 1217, Appendix E, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure values from 61 dB(A) according

to DIN EN ISO 2151:2009


Compressor system CL-Receiver mounted

screw compressor

Compressed air center CLD-Receiver mounted screw compressor

and refrigerant dryer

Compressor system CL 4- to CL 20-

Compressed air center CLD 4- to CLD 20-

Effective free air delivery: 11 – 77 cfm, 0.310 – 2.17 m³/min

Pressure range: 125 and 150 psig, 8 and 10 bar



21

BOGE

Model


air delivery* 60 Hz


W x D x H

Weight


CL 4- 150 10 11 0.31 4.0 3.0 3-phase 48 x 28.75 x 43 547

CL 5- 150 10 14 0.40 5.5 4.0 3-phase 48 x 28.75 x 43 580

CL 5- 150 10 14 0.40 5.5 4.0 single-phase 48 x 28.75 x 43 591

CL 7.5- 125 8 30 0.85 7.5 5.5 3-phase 48 x 28.75 x 43 591

CL 7.5- 125 8 30 0.85 7.5 5.5 single-phase 48 x 28.75 x 43 602

CL 10- 150 10 36 1.03 10.0 7.5 3-phase 67 x 28.75 x 48 998

CL 20- 150 10 77 2.17 20.0 15.0 3-phase 67 x 28.75 x 48 1086



BOGE

Model


air delivery* 60 Hz


W x D x H

Weight


CLD 4- 150 10 11 0.31 4.0 3.0 3-phase 48 x 28.75 x 43 560

CLD 5- 150 10 14 0.40 5.5 4.0 3-phase 48 x 28.75 x 43 604

CLD 5- 150 10 14 0.40 5.5 4.0 single-phase 48 x 28.75 x 43 615

CLD 7.5- 125 8 30 0.85 7.5 5.5 3-phase 48 x 28.75 x 43 618

CLD 7.5- 125 8 30 0.85 7.5 5.5 single-phase 48 x 28.75 x 43 629

CLD 10- 150 10 36 1.03 10.0 7.5 3-phase 67 x 28.75 x 48 1093

CLD 20- 150 10 77 2.17 20.0 15.0 3-phase 67 x 28.75 x 48 1206




C 9


Pressure range: 115 – 190 psig, 8 – 13 bar

Motor range: 10 HP, 7.5 kW

EFFICIENCY

The specially designed BOGE

airend provides high output

volumes at low energy

consumption – for reliable and

effi cient compressed air supply.

CONTROL

The BOGE FOCUS control is the

standard compressor control and

provides numerous control and

monitoring features.

EXTREMELY QUIET

All C series compressors are

characterized by very low sound

pressure levels due to their super-

silenced cabinets.

Screw compressor C 9


23

Compact, effi cient, very quiet: The space saving C series screw compressors are

designed for long-term performance. A refrigerant dryer mounted on a horizontal

receiver is available as an option. Even at full load operation the compressor

operates reliably and safely at optimum effi ciency providing a long service life.

BOGE

Model

Max. pressure** Effective free air delivery* Motor power Dimensions

W x D x H

Weight


C 9 115 7 45 1.27 10.0 7.5 19 x 27.7 / 35.7 x 37.6 474

C 9 115/125 8/8.6 42 1.20 10.0 7.5 19 x 27.7 / 35.7 x 37.6 474

C 9 150 10 39 1.10 10.0 7.5 19 x 27.7 / 35.7 x 37.6 474

C 9 190 13 32 0.90 10.0 7.5 19 x 27.7 / 35.7 x 37.6 474



** Max. pressure of the compressor


24

Powerful in every detail:

The design advantages of the BOGE S series.

INTAKE FILTER WITH PAPER

MICROFILTER INSERT

quietly intakes air from the cool section of

the cooling air fl ow while at the same time

intensively cleans it to ensure the longest

possible service life of all downstream

components. The compressor operates

trouble-free even in dusty conditions.

MULTIFUNCTIONAL INTAKE CONTROL

ensures a valve-less oil circuit without oil stop

or check valve and the lowest possible internal

pressure losses. It hermetically seals to prevent

discharge of oil vapors. A fully unloaded start

helps to save energy. The Multifunction control

is effectively safe in operation and in the event

of shutdown fails safe.

AIREND WITH ELECTRIC MOTOR

The airend is driven by a class F, TEFC standard

motor which is located in the coolest section of

the compressor. BOGE motors have genuine

power reserves and are therefore not

overloaded.

S series screw compressors

25

Intelligent design advantage: The award winning BOGE S series design

incorporates a clever cabinet layout with a high quality fi nish and maximum

effi ciency. Every component part incorporates the decade long know-how

of our engineers – advantages paid back through reliable daily operation.

EASY MAINTENANCE

All maintenance parts are easily accessible

from one side of the compressor. This reduces

maintenance costs to a minimum.

INTEGRATED SWITCH CABINET

The switch cabinet is integrated into the screw

compressor housing. It is fully pre-wired and

ready for use. The cabinet also houses a quick fi t

modular microprocessor compressor controller.

INTERNAL PIPEWORK

All oil carrying pipes are made of steel

terminating with high quality precision threaded

joints that are leak proof and safe even under

highest pressures. The entire machine utilizes

only one hose on the clean air side which also

serves for vibration damping.

OPTIONAL WATER COOLING

The larger high volume BOGE screw

compressors are available as water cooled

(40-350 HP).

COOLER SECTION

The self-suffi cient section, where the highest

cooling air temperatures occur, is located at the

top of the compressor in the cooling air discharge

and houses a generously dimensioned aftercooler

with separate cooling air fan and cooling air

guiding hood. The cooling air either discharges

to the atmosphere or ideally, as heat recovery,

to supplement space heating via ducting.

BOGE SAFETY OIL SEPARATION SYSTEM

Includes horizontal oil separation reservoir,

directly mounted airend and external oil separator

cartridge. This innovative system ensures oil

separation with virtually no pressure losses and

a residual oil content of only 1-3 ppm in every

operating phase. The external oil separator

cartridge is minimally loaded: a guarantee for

long service life.




Motor range: 10 – 30 HP, 7.5 – 22 kW

DECOUPLED UNIT

A sub-frame mounted on vibration

damping feet prevents transmission

of structure borne sound.

A rigid basic frame allows easy

transportation by forklift truck.

VALVE-LESS OIL CIRCUIT

The BOGE screw compressor is

designed with a valve-less oil

circuit eliminating the need for oil

stop or check valves. This function

provides maximum operating

safety.

HORIZONTAL OIL RESERVOIR

For long service life and high

compressed air quality! The oil

separation reservoir tank is located

in the lowest section of the machine

and here rapid oil pre-separation

takes place before the compressed

air enters the external oil separator

cartridge.

Screw compressor S 10 to S 29-2

CONTROL






27

Dependable output: BOGE S series screw compressors are designed for fl exible

and reliable operation in every situation. These industrial compressors can be

tank mounted with or without a dryer. The high quality workmanship and effi cient

compact design stand for high operating safety and maximum effi ciency.

BOGE

Model

Max. pressure Effective free air

delivery*


super-silenced

W x D x H

Dimensions

ultra-silenced

W x D x H

Weight

super-silenced

Weight

ultra-silenced

psig bar cfm m3/min HP kW inches inches lbs. lbs.

S 10 100 7 44 1.24 10 7.5 37 x 27.5 x 38.5 37 x 27.5 x 47.5 516 549

115/125 8/8.6 42 1.18 10 7.5 37 x 27.5 x 38.5 37 x 27.5 x 47.5 516 549

150 10 38 1.06 10 7.5 37 x 27.5 x 38.5 37 x 27.5 x 47.5 516 549

190 13 32 0.91 10 7.5 37 x 27.5 x 38.5 37 x 27.5 x 47.5 516 549

S 15 100 7 62 1.75 15 11.0 37 x 27.5 x 38.5 37 x 27.5 x 47.5 604 637

115/125 8/8.6 58 1.65 15 11.0 37 x 27.5 x 38.5 37 x 27.5 x 47.5 604 637

150 10 51 1.45 15 11.0 37 x 27.5 x 38.5 37 x 27.5 x 47.5 604 637

190 13 44 1.25 15 11.0 37 x 27.5 x 38.5 37 x 27.5 x 47.5 604 637

S 20-2 100 7 94 2.67 20 15.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 752 807

115/125 8/8.6 91 2.57 20 15.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 752 807

150 10 80 2.24 20 15.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 752 807

190 13 67 1.90 20 15.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 752 807

S 24-2 100 7 113 3.20 25 18.5 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 807 858

115/125 8/8.6 108 3.05 25 18.5 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 807 858

150 10 94 2.66 25 18.5 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 807 858

190 13 80 2.26 25 18.5 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 807 858

S 29-2 100 7 129 3.64 30 22.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 858 909

115/125 8/8.6 122 3.45 30 22.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 858 909

150 10 110 3.11 30 22.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 858 909

190 13 91 2.57 30 22.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 858 909




Compressor system S-Screw compressor

mounted on horizontal receiver

Compressor system S 10- to S 29-2-



Motor range: 10 – 30 HP, 7.5 – 22 kW


29

BOGE

Model

Max. pressure Receiver

volume

Effective free

air delivery*

Motor

power

Dimensions

super-silenced

W x D x H

Dimensions

ultra-silenced

W x D x H

Weight

super-silenced

Weight

ultra-silenced

psig bar gallons cfm m3/min HP kW inches inches lbs. lbs.

S 10- 100 7 120 44 1.24 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 941 974

115/125 8/8.6 120 42 1.18 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 941 974

150 10 120 38 1.06 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 941 974

190 13 120 32 0.91 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 941 974

S 15- 100 7 120 62 1.75 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1069 1102

115/125 8/8.6 120 58 1.65 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1069 1102

150 10 120 51 1.45 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1069 1102

190 13 120 44 1.25 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1069 1102

S 20-2- 100 7 240 94 2.67 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1648 1699

115/125 8/8.6 240 91 2.57 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1648 1699

150 10 240 80 2.24 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1648 1699

190 13 240 67 1.90 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1648 1699

S 24-2- 100 7 240 113 3.20 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1703 1754

115/125 8/8.6 240 108 3.05 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1703 1754

150 10 240 94 2.66 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1703 1754

190 13 240 80 2.26 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1703 1754

S 29-2- 100 7 240 129 3.64 30 22.0 80 x 40 x 54 80 x 40 x 67.5 1754 1805

115/125 8/8.6 240 122 3.45 30 22.0 80 x 40 x 54 80 x 40 x 67.5 1754 1805

150 10 240 110 3.11 30 22.0 80 x 40 x 54 80 x 40 x 67.5 1754 1805

190 13 240 91 2.57 30 22.0 80 x 40 x 54 80 x 40 x 67.5 1754 1805




Compressed air center SD-Screw compressor

with refrigerant dryer

mounted on horizontal receiver

Compressor center SD 10- to SD 29-2-



Motor range: 10 – 30 HP, 7.5 – 22 kW


31

BOGE

Model

Max. pressure Receiver

volume

Effective free

air delivery*

Motor

power

Dimensions

super-silenced

W x D x H

Dimensions

ultra-silenced

W x D x H

Weight

super-silenced

Weight

ultra-silenced

psig bar gallons cfm m3/min HP kW inches inches lbs. lbs.

SD 10- 100 7 120 44 1.24 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 1135 1168

115/125 8/8.6 120 42 1.18 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 1135 1168

150 10 120 38 1.06 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 1135 1168

190 13 120 32 0.91 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 1135 1168

SD 15- 100 7 120 62 1.75 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1223 1256

115/125 8/8.6 120 58 1.65 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1223 1256

150 10 120 51 1.45 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1223 1256

190 13 120 44 1.25 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1223 1256

SD 20-2- 100 7 240 94 2.67 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1914 1965

115/125 8/8.6 240 91 2.57 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1914 1965

150 10 240 80 2.24 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1914 1965

190 13 240 67 1.90 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1914 1965

SD 24-2- 100 7 240 113 3.20 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1993 2044

115/125 8/8.6 240 108 3.05 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1993 2044

150 10 240 94 2.66 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1993 2044

190 13 240 80 2.26 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1993 2044

SD 29-2- 100 7 240 129 3.64 30 22.0 80 x 40 x 54 80 x 40 x 67.5 2044 2095

115/125 8/8.6 240 122 3.45 30 22.0 80 x 40 x 54 80 x 40 x 67.5 2044 2095

150 10 240 110 3.11 30 22.0 80 x 40 x 54 80 x 40 x 67.5 2044 2095

190 13 240 91 2.57 30 22.0 80 x 40 x 54 80 x 40 x 67.5 2044 2095






Motor range: 30 – 350 HP, 22 – 340 kW

DECOUPLED UNIT

A sub-frame mounted on vibration

damping feet prevents transmission

of structure borne sound.

A rigid basic frame allows

easy transportation by forklift.

VALVE-LESS OIL CIRCUIT

The BOGE screw compressor is

designed with a valve-less oil circuit

eliminating the need for oil stop or

check valves. This function provides

maximum operating safety.

CONTROL





EFFICIENCY

The specially designed BOGE airend

provides high output volumes at low

energy consumption – for reliable

and energy effi cient compressed air

supply.

Screw compressor S 40-2 to S 341


33

BOGE

Model

Max.

pressure

Effective free

air delivery*

Motor power Dimensions1)

silenced

W x D x H

Dimensions2)

super-silenced

W x D x H

Compressed

air

Weight

silenced

Weight

super-

silenced

Main drive

motor

Fan

motor

psig bar cfm m3/min HP kW HP kW inches inches outlet lbs. lbs.

S 40-2 100 7 195 5.53 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1630 1700

115/125 8/8.6 183 5.17 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1630 1700

150 10 163 4.63 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1630 1700

190 13 135 3.82 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1630 1700

S 50-2 100 7 235 6.65 50 37 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1675 1740

115/125 8/8.6 224 6.35 50 37 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1675 1740

150 10 204 5.78 50 37 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1675 1740

190 13 175 4.95 50 37 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1675 1740

S 60-2 100 7 258 7.30 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1850 1920

115/125 8/8.6 247 7.00 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1850 1920

150 10 224 6.34 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1850 1920

190 13 190 5.36 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1850 1920

S 61-2 100 7 286 8.09 60 45 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2570 2670

115/125 8/8.6 272 7.70 60 45 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2570 2670

150 10 244 6.92 60 45 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2570 2670

190 13 207 5.87 60 45 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2570 2670

S 75-2 100 7 346 9.80 75 55 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2680 2790

115/125 8/8.6 329 9.33 75 55 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2680 2790

150 10 293 8.30 75 55 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2680 2790

190 13 251 7.11 75 55 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2680 2790

S 100-2 100 7 449 12.71 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2755 2865

115/125 8/8.6 427 12.10 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2755 2865

150 10 371 10.50 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2755 2865

190 13 325 9.20 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2755 2865

S 101 100 7 480 13.60 100 75 6.2 4.6 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4080 4210

115/125 8/8.6 463 13.10 100 75 6.2 4.6 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4080 4210

150 10 403 11.40 100 75 6.2 4.6 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4080 4210

190 13 346 9.80 100 75 6.2 4.6 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4080 4210

S 125 100 7 580 16.43 125 90 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4190 4315

115/125 8/8.6 554 15.70 125 90 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4190 4315

150 10 484 13.70 125 90 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4190 4315

190 13 424 12.00 125 90 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4190 4315

S 150 100 7 685 19.40 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4565 4700

115/125 8/8.6 650 18.40 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4565 4700

150 10 576 16.30 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4565 4700

190 13 501 14.20 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4565 4700

S 151 100 7 706 20.00 150 110 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5090 5315

115/125 8/8.6 685 19.40 150 110 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5090 5315

150 10 600 17.00 150 110 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5090 5315

190 13 508 14.40 150 110 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5090 5315

S 180 100 7 862 24.40 175 129 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5400 5620

115/125 8/8.6 823 23.30 175 129 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5400 5620

150 10 735 20.80 175 129 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5400 5620

190 13 629 17.80 175 129 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5400 5620

S 220 100 7 1024 29.00 200 150 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5735 5955

115/125 8/8.6 895 27.90 200 150 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5735 5955

150 10 886 25.10 200 150 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5735 5955

190 13 766 21.70 200 150 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5735 5955

S 271 100 7 1274 36.09 270 200 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 9920 10140

115/125 8/8.6 1225 34.70 270 200 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 9920 10140

150 10 1077 30.50 270 200 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 9920 10140

190 13 872 24.70 270 200 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 9920 10140

S 341 100 7 1498 42.43 340 250 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 11020 11240

115/125 8/8.6 1441 40.80 340 250 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 11020 11240

150 10 1310 37.10 340 250 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 11020 11240

190 13 1119 31.70 340 250 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 11020 11240



1) Super-silenced at the intake end

2) Super-silenced at the intake end and discharge end




Motor range: 20 – 150 HP, 15 – 110 kW

INTERNAL PIPEWORK

All oil carrying pipes are made of

steel terminating with high quality

precision threaded joints that are

leak proof and safe even under the

highest pressures. The entire

machine utilizes only one hose on

the clean air side which also serves

for vibration damping.

FREQUENCY CONTROL

The frequency converter ensures a

continuous volume fl ow between

25 and 100 percent automatically

adapting to the momentary

demand of the compressed air

system. Soft starting also avoids

undue wear and tear and prolongs

the service life of the compressor.

CONTROL





ENERGY SAVING

Tighter/reduced system pressure

virtually eliminates off load running,

and in turn reduces start-up current

peaks, and contributes to potential

energy savings of up to 40%

Screw compressor SF 15 to SF 150

with frequency control

SF 15 to SF 29-2 SF 40-2 to SF 150


35

Advantage through distinctly reduced energy consumption: The integrated frequency

control of the SF series reduces idling times and eliminates pressure fl uctuations.

Using less compressed air means using less energy because the volume fl ow is

continuously adapted to demand. Soft starting also avoids undue wear and tear and

prolongs the service life of the compressor.

For maximized effi ciency and air delivery: This range of screw compressors is ideal

for the effi cient operation of larger volumes of air. The integrated frequency converter

ensures a continuous volume fl ow between 25 and 100 percent by automatically

adapting to the momentary demand of the compressed air system – an advantage

with big pay back due to distinctly reduced energy costs.

BOGE

Model

Max.

pressure

Effective free

air delivery*


silenced

W x D x H

Dimensions2)

super-silenced

W x D x H

Compressed

air

Weight

silenced

Weight

super-

silenced

Main drive

motor

Fan

motor


SF 15 100 7 18- 62 0.52- 1.75 15 11 – – – 37 x 27 x 55 NPT 1/2 – 562

115/125 8/8.6 17- 58 0.49- 1.65 15 11 – – 37 x 27 x 46 – NPT 1/2 – 562

150 10 14- 51 0.39- 1.45 15 11 – – 37 x 27 x 46 – NPT 1/2 – 562

190 13 14- 44 0.39- 1.25 15 11 – – 37 x 27 x 46 – NPT 1/2 – 562

SF 24-2 100 7 31-113 0.89- 3.21 25 18.5 – – 47 x 33 x 55 – NPT 1 – 856

115/125 8/8.6 30-108 0.85- 3.05 25 18.5 – – 47 x 33 x 55 – NPT 1 – 856

150 10 22- 94 0.63- 2.66 25 18.5 – – 47 x 33 x 55 – NPT 1 – 856

190 13 16- 80 0.44- 2.26 25 18.5 – – 47 x 33 x 55 – NPT 1 – 856

SF 29-2 100 7 37-129 1.07- 3.64 30 22 – – 47 x 33 x 55 – NPT 1 – 856

115/125 8/8.6 36-122 1.02- 3.45 30 22 – – 47 x 33 x 55 – NPT 1 – 856

150 10 31-110 0.88- 3.11 30 22 – – 47 x 33 x 55 – NPT 1 – 856

190 13 16- 80 0.71- 2.57 30 22 – – 47 x 33 x 55 – NPT 1 – 856

SF 40-2 100 7 49-195 1.38- 5.53 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1730 1795

115/125 8/8.6 46-183 1.29- 5.17 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1730 1795

150 10 41-163 1.16- 4.63 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1730 1795

190 13 34-135 0.96- 3.82 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1730 1795

SF 60-2 100 7 64-258 1.82- 7.30 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1915 2018

115/125 8/8.6 62-247 1.75- 7.00 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1915 2018

150 10 56-223 1.58- 6.34 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1915 2018

190 13 47-189 1.34- 5.36 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1915 2018

SF 100-2 100 7 114-457 3.20-13.00 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 3305 3415

115/125 8/8.6 107-427 3.00-12.10 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 3305 3415

150 10 93-371 2.60-10.50 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 3305 3415

190 13 81-325 2.30- 9.20 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 3305 3415

SF 150 100 7 171-685 4.90-19.40 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 5290 5425

115/125 8/8.6 162-650 4.60-18.40 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 5290 5425

150 10 144-575 4.08-16.30 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 5290 5425

190 13 126-501 3.55-14.20 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 5290 5425






Motor range: 30 – 270 HP, 22 – 200 kW

MAXIMUM EFFICIENCY

The specially designed BOGE airend

provides high output volumes at low

energy consumption – for reliable and

energy effi cient compressed air supply.

Tighter/reduced system pressure

virtually eliminates off load running,

which in turn reduces start-up current

peaks, and contributes to potential

energy savings of up to 40%.

FREQUENCY CONTROL

The frequency converter ensures a

continuous volume fl ow between

25 and 100 percent automatically

adapting to the momentary demand

of the compressed air system. The

soft starting also avoids undue wear

and tear and prolongs the service

life of the compressor.

CONTROL





PROTECTION

A full range of high performance

synthetic lubricants are available

for various applications. Extending

lubricant change intervals and

protecting your equipment.

Screw compressor SLF 30 to SLF 271

with frequency control

SLF 30 (optionally with radial fan)


37

Best specifi c working point: When frequency controlled the SLF series compressors

automatically adjust to the air demand while controlling the pressure perfectly.

In the event of a change of the pressure value, the output automatically adjusts.

A 190 psig machine thus regulated to a 125 psig machine yields a correspondingly

higher output – without any expensive remodeling or design related modifi cations.



BOGE

Model

Max.

pressure

Effective free

air delivery*


silenced

W x D x H

Dimensions2)

super-silenced

W x D x H

Com-

pressed

air

Weight

silenced

Weight

super-

silenced

Main drive

motor

Fan

motor


SLF 30 100 7 37.4- 143 1.06- 4.04 30 22 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1543 1609

115/125 8/8.6 37.4- 137 1.06- 3.87 30 22 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1543 1609

150 10 37.4- 117 1.06- 3.30 30 22 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1543 1609

190 13 37.4- 94.6 1.06- 2.68 30 22 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1543 1609

SLF 40 100 7 37.4- 186 1.06- 5.28 40 30 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1698 1786

115/125 8/8.6 37.4- 178 1.06- 5.05 40 30 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1698 1786

150 10 37.4- 160 1.06- 4.53 40 30 1.5 1.1 74 x 38 x 57 74 x 38 x 77 NPT 11/4 1698 1786

190 13 37.4- 135 1.06- 3.82 40 30 1.5 1.1 74 x 38 x 57 74 x 38 x 77 NPT 11/4 1698 1786

SLF 51 100 7 53.3- 248 1.51- 7.01 50 37 2.4 1.8 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2249 2359

115/125 8/8.6 53.3- 237 1.51- 6.71 50 37 2.4 1.8 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2249 2359

150 10 51.9- 213 1.47- 6.04 50 37 2.4 1.8 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2249 2359

190 13 48.4- 176 1.37- 4.98 50 37 2.4 1.8 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2249 2359

SLF 61 100 7 54.7- 290 1.55- 8.22 60 45 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2535 2646

115/125 8/8.6 54.7- 278 1.55- 7.87 60 45 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2535 2646

150 10 53.3- 244 1.51- 6.92 60 45 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2535 2646

190 13 50.1- 208 1.42- 5.90 60 45 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2535 2646

SLF 75 100 7 54.7- 344 1.55- 9.75 75 55 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2800 2910

115/125 8/8.6 54.7- 329 1.55- 9.33 75 55 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2800 2910

150 10 53.3- 297 1.51- 8.40 75 55 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2800 2910

190 13 51.6- 256 1.42- 7.26 75 55 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2800 2910

SLF 101 100 7 149- 503 4.22-14.25 100 75 6.2 4.6 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4850 4982

115/125 8/8.6 149- 482 4.22-13.64 100 75 6.2 4.6 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4850 4982

150 10 147- 435 4.16-12.33 100 75 6.2 4.6 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4850 4982

190 13 141- 374 4.00-10.58 100 75 6.2 4.6 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4850 4982

SLF 125 100 7 149- 579 4.22-16.41 125 90 8.5 6.34 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4960 5093

115/125 8/8.6 149- 554 4.22-15.70 125 90 8.5 6.34 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4960 5093

150 10 147- 507 4.16-14.36 125 90 8.5 6.34 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4960 5093

190 13 141- 443 4.00-12.56 125 90 8.5 6.34 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4960 5093

SLF 221 100 7 228-1041 6.46-29.48 220 160 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 9921 10141

115/125 8/8.6 228- 996 6.46-28.21 220 160 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 9921 10141

150 10 218- 885 6.18-25.06 220 160 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 9921 10141

190 13 193- 719 5.46-20.36 220 160 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 9921 10141

SLF 271 100 7 228-1280 6.46-36.26 270 200 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 10362 10582

115/125 8/8.6 228-1225 6.46-34,70 270 200 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 10362 10582

150 10 218-1077 6.18-30.50 270 200 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 10362 10582

190 13 193- 872 5.46-24.70 270 200 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 10362 10582

SERVICE

READY FOR ACTION WORLDWIDE:

BOGE Service Support – Worldwide

FLEXIBLE SERVICE

This BOGE service program has been developed to adapt to each customer’s unique requirements.

It is our objective to create a tailor-made BOGE service package covering inspection, service,

breakdown, with customized warranty arrangements as well as complete all-in service contracts.

Please contact us to help you determine the type of service best suited to meet your needs:

Just email us at [email protected] – our service specialists will be in touch with you shortly!

SERVICE / MAINTENANCEService support solutions including

contracts covering repair, and even

warranty extension by using BOGE

Genuine Parts and qualifi ed BOGE

Service Technicians.

EXTENDED WARRANTY Extension of your factory warranty up

to 5 years with the use of BOGE Genuine

Parts and lubricants for total security

and back-up.

MAINTENANCE & REPAIROptions include; long-term fi xed cost

maintenance plans, a fl at rate for all

types of service and spare parts with

a possible warranty extension up to

5 years.

COMMISSIONINGConnection and adjustment of all

equipment at your facility: a fast

and dependable service delivered

by qualifi ed BOGE service technicians.

Full installation on request.

24 HOUR HELPLINE Emergency helpline for trouble

shooting and technical support:

available any time around the clock!

COMPRESSED AIR FLAT RATE

A comprehensive service plan created to satisfy your individual requirements:

e.g. taking responsibility for the compressed air station at your facility including complete plant

management for a monthly fl at rate irrespective of hours of operation (energy costs not included).


24-hr

Service your added value! Maximized reliability and economic effi ciency are

not the only technical advantages that BOGE has to offer. Our com prehensive

service support program will ensure your BOGE compressed air system

remains in tip top condition. Wherever you need us, whatever we can do for

you: BOGE Service Support is always readily available close by – competent,

to the highest standards, and always one step ahead.

BOGE EXTENDED WARRANTY

BOGE Genuine Parts enable you to extend your

factory warranty up to 5 years: 2 years factory

warranty with 3 years additional Genuine Parts

warranty – the choice is yours. Furthermore,

Genuine Parts ensures manufacturer’s

recommended maintenance schedule of new

and existing equipment at the specifi ed service

intervals.

For more information email

[email protected]

BOGE ORIGINAL PARTS

Only original BOGE spare parts have the

manufacturer’s technological edge. You can be

confi dent when opting for BOGE original spare

parts in the service of your BOGE compressed

air system will ensure that the integrity of the

compressor is maintained, effi ciency is retained

and your peace of mind is sustained.

ALWAYS NEARBY

BOGE has a network of dedicated service

technicians and certifi ed partners at its

disposal to help you worldwide with your

installation, upgrading, commissioning or

approval, maintenance, repair, or inspection:

You can rely on the know-how and experience

of our qualifi ed experts – at all times.

Hotline Mobile Service: 770-874-1570

EMERGENCY ASSISTANCE

In the case of an emergency where immediate

technical support is required, the BOGE product

support trouble shooters or the BOGE Helpline

team are available to you 24/7.

BOGE: 770-874-1570

AIR AUDITS

By analyzing your existing compressed air

system, our energy effi ciency experts can

identify where savings can be made. The

BOGE AIReport includes measurement of:

dew point control, vibration control, leakage,

noise, oil check and TAN check.

TRAINING COURSES

The BOGE Training Courses were established

in order to train and certify internal employees

and external partners as qualifi ed BOGE Service

Technicians. Attendance of Training Courses held

in the in-house training center further assist in

refreshing existing BOGE Service Technician’s

knowledge at regular intervals.

C E R T I F I E D

SERVICE TECHNICIAN

Screw Compressors

39

30

2-U

SA

-2-1

0.2

01

0/T

· T

echn

ical

cha

nges

and

err

ors

rese

rved

.

Our ranges of services include the following:

• Energy effi cient systems development

• Plant design and engineering

• System control and visualization

• Oil injected screw compressors

• Compressed air treatment

• Compressed air distribution and storage

• Compressed air accessories

• Compressed air service

For four generations, customers from mechanical engineering, industry and trade have

relied on BOGE know-how when it comes to planning, developing and manufacturing

compressed air systems. They are fully aware of the fact that BOGE AIR is more than just

ordinary compressed air: utmost safety, outstanding effi ciency, excellent quality, maximized

fl exibility along with dependable service are the ingredients to transform BOGE AIR into air

to work with – in Germany, in Europe and in more than 80 countries around the world.


ISO 1217 ANNEX CCAGI/PNEUROP PN2CPTC2

50-200 HP

CAGI Rotary Screw Compressor Performance

Verifi cation Program

PerformanceTested and Rated

in Accordancewith

Program administered byIntertak testing Services

BOGE COMPRESSORS

BOGE AMERICA, INC.

3414 Florence Circle

Suite 100 · Powder Springs, GA 30127

Tel. 770-874-1570 · Fax. 770-874-1571

www.boge.com · [email protected]

Boge Screw Usa

Documents

Transcript of Boge Screw Usa