Bodycote Kolsterising
2
THERMAL PROCESSING - KOLSTERISING ® For more information contact: Bodycote Kolsterising ® North America 303 Wagner Drive • Boaz • AL 35957 Phone: (256) 840 0801 • Fax: (256) 840 0803 www.bodycote.com Bodycote Kolsterising ® North America presents a proven anti-galling process for corrosion resistant, non magnetic AISI 316 components for the automobile producing industry. Kolsterising ® does not apply a coating on the surface but results in a pure diffusion zone from the surface inwards, with excellent toughness and no risk of delamination or peeling. Further, Kolsterising ® increases the surface hardness of austenitic stainless steels to a level of 1,000 - 1,200 HV 0.05 comparable with 70 - 74 HRc. Copyright 2003 . 02/03 KOL rev1 1. Engine valves Kolsterising ® improves valve shaft/stem friction behavior . 4. Brake systems Non-magnetic parts are treated to reduce friction and to reduce influence of impact forces. 3. Fuel cell spool valves Kolsterising ® reduces friction and eliminates corrosive attack of valve internals. 2. Fuel injectors Non-magnetic internals are kolsterised to eliminate galling and to reduce impact influences. 5. Automatic transmissions Non-magnetic internals in controls are kolsterised to reduce friction and wear. 8. Automobile painting Gear pumps for metering & transport of water diluted paints benefit from reduced abrasive wear with unchanged or improved corrosion resistance. 7. Engine block cleaning Dramatic extended life of HP-cleaning nozzles due to reduction of cavitation erosion influences. 6. Engine cooling Kolsterised sealing devices last longer due to reduced friction and increased anti-wear properties. No Distortion Carbon Diffusion Prevention of Galling Low Temperature Process Improved Wear Resistance Retention of Non-Magnetic Properties Full Retention of Corrosion Resistance
Transcript of Bodycote Kolsterising
7/21/2019 Bodycote Kolsterising
http://slidepdf.com/reader/full/bodycote-kolsterising 1/2
THERMAL PROCESSING - KOLSTERISING ®
For more information contact:
Bodycote Kolsterising® North America303 Wagner Drive • Boaz • AL 35957
Phone: (256) 840 0801 • Fax: (256) 840 0803
www.bodycote.com
Bodycote Kolsterising® North America presents a
proven anti-galling process for corrosion resistant,
non magnetic AISI 316 components for the automobile
producing industry.
Kolsterising® does not apply a coating on the surface but results in a
pure diffusion zone from the surface inwards, with excellent toughness
and no risk of delamination or peeling. Further, Kolsterising® increases
the surface hardness of austenitic stainless steels to a level of
1,000 - 1,200 HV 0.05 comparable with 70 - 74 HRc.
Copyright 2003 . 02/03 KOL
1. Engine valvesKolsterising® improves valve
shaft/stem friction behavior.
4. Brake systemsNon-magnetic parts are treated to
reduce friction and to reduce influence
of impact forces.
3. Fuel cell spool valvesKolsterising® reduces friction and
eliminates corrosive attack of
valve internals.
2. Fuel injectorsNon-magnetic internals are kolsterised
to eliminate galling and to reduce
impact influences.
5. Automatic transmissions
Non-magnetic internals in controls are
kolsterised to reduce friction and wear.
8. Automobile painting
Gear pumps for metering & transport
of water diluted paints benefit from
reduced abrasive wear with unchanged
or improved corrosion resistance.
7. Engine block cleaning
Dramatic extended life of HP-cleaning
nozzles due to reduction of cavitation
erosion influences.
6. Engine cooling
Kolsterised sealing devices last longer
due to reduced friction and increased
anti-wear properties.
No Distortion
Carbon Diffusion
Prevention of Galling
Low Temperature Process
Improved Wear Resistance
Retention of Non-Magnetic Properties
Full Retention of Corrosion Resistance
7/21/2019 Bodycote Kolsterising
http://slidepdf.com/reader/full/bodycote-kolsterising 2/2
THERMAL PROCESSING - KOLSTERISING ®
Copyright 2003 . 02/03 KOL
For more information contact:
Bodycote Kolsterising® North America303 Wagner Drive • Boaz • AL 35957
Phone: (256) 840 0801 • Fax: (256) 840 0803
www.bodycote.com
Bodycote InternationalFor more than 25 years, the Bodycote group has
followed a strategy of continuous improvement.
The group consists of more than 240 industrial sites
spread over 21 countries.
Our industrial customers recognize the cost advantages and
efficiency benefits deriving from the group’s economies of scale.
They can then concentrate their resources into core activities.
Casting Densification
Ceramic Densification
Densal®
Densal® II + T6
Diffusion Bonding
Glass Densification
Hip Clad Composites
Hip Brazing
Novel Materials
P/M Billets
P/M Near Net Shapes
Plastic Densification
Chemical Analysis
Coatings & Corrosion Testing
Construction & Building Products
Environmental Testing
Failure Analysis & Litigation
Fire & Flammability Testing
Metallurgical Services
Pharmaceuticals/Medical Devices
Polymer/Plastic/Composite
Textile/Consumer Products
Vehicle Simulation/Engine Testing
Aluminide Diffusion
Boron Carbide
Chemically Formed Ceramics
Chromium Oxide
Chromium Nitride
Copper Plating
Diamond Like Carbon
Physical Vapor Deposition (PVD)
Titanium Aluminum Nitride
Titanium Carbonitride
Titanium Nitride
Tungsten Carbon
Silicide Diffusion
Zirconium Nitride
HEAT TREATING AND BRAZING HOT ISOSTATIC PRESSING MATERIALS TESTING METALLURGICAL COATINGS
Aluminum Heat Treating and Brazing
Assembly and Brazing
Atmosphere Belt Brazing
Austemper/Marquenching
Continuous and Batch Processes
Ferritic Nitrocarburizing
Hardening Induction/Case/Neutral
Honeycomb BrazingLindure®
Nitriding Gas/Salt/Ion
Overhaul and Repair
OxycoteProcess
Kolsterising®
Vacuum Heat Treat and Brazing
Vacuum Carburizing
Bodycote Thermal ProcessingHeadquarters5001 LBJ FWY Suite 800 . Dallas . TX75244Tel: (214) 904 2420
Bodycote Hot Isostatic PressingHeadquarters155 River Street . Andover . MA01810Tel: (978) 470 1620
Bodycote Materials TestingUSA Headquarters7530 Frontage Road . Skokie . IL60077Tel: (888) 263 9268
Bodycote Metallurgical CoatingsHeadquarters7856 McCloud Road . Greensboro . NC27409Tel: (336) 665 0005
Bodycote Materials TestingCanada Headquarters2395 Speakman Dr . MississaugaONT L5K 1B3
Tel: (800) 323 3657
