BOARD ADCS LIST

CONTENT

A.KIT ARM..................................................................................................................................................2

I. STM32 Development boards Open407I-C Package B (130.99$).....................................................2

Overview...................................................................................................................................................2

What's on the mother board...................................................................................................................2

What's on the Core407I...........................................................................................................................4

Development Resources...........................................................................................................................5

Package Contains.....................................................................................................................................5

Standard Package................................................................................................................................5

Accessory Boards Package..................................................................................................................6

II. STM32 Development boards Open407Z-C Package B (128.99$)...................................................7

Overview...................................................................................................................................................7

What's on the mother board...................................................................................................................7

What's on the Core407Z..........................................................................................................................9

Development Resources.........................................................................................................................10

Package Contains...................................................................................................................................10

Standard Package..............................................................................................................................10

Accessory Boards Package................................................................................................................11

III. ARM LPC Development Boards Open4337-C Package B (99.99$)............................................12

Overview.................................................................................................................................................12

What's on the mother board.................................................................................................................12

What's on the Core4337........................................................................................................................14

Development Resources.........................................................................................................................15

Package Contains...................................................................................................................................15

Standard Package..............................................................................................................................15

Accessory Boards Package................................................................................................................16

IV. STM32 Development boards Open4357-C Package B (144.99$)................................................17

Overview.................................................................................................................................................17

What's on the mother board.................................................................................................................17

Package Contains...................................................................................................................................20

Standard Package..............................................................................................................................20

Accessory Boards Package................................................................................................................20

B.KIT DSPIC..............................................................................................................................................21

What's On Board...................................................................................................................................21

Supported Devices..................................................................................................................................22

Features...................................................................................................................................................23

Examples.................................................................................................................................................23

Downloads...............................................................................................................................................23

Package Contains...................................................................................................................................24

C. SUMMARY...........................................................................................................................................25

A.KIT ARM

I. STM32 Development boards Open407I-C Package B (130.99$).

Website: http://www.wvshare.com/product/Open407I-C-Package-B.htm

OverviewOpen407I-C is an STM32 development board designed for the STM32F407IGT6 microcontroller, consists of the mother board and the MCU core board Core407I.

The Open407I-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32F4 series microcontrollers.

What's on the mother board

1. MCU core board connector: for easily connecting the Core407I2. CAN1 interface: communicates with accessory boards which feature the CAN device

conveniently3. PS/2 interface: easily connects to PS/2 keyboard and/or mouse4. DCMI interface: for connecting camera module5. I2C2 / I2C3 interface: easily connects to I2C peripherals such as I/O expander (PCF8574),

EEPROM (AT24Cxx), etc.6. SPI1 / SPI2 interface

o easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.

o SPI1 features AD/DA alternative function, supports connecting AD/DA module as well7. I2S2 / I2S3 / I2C1: for connecting I2S peripherals, such as Audio module8. SDIO interface: for connecting Micro SD module, features much faster access speed rather than

SPI9. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.10. CAN2 interface: communicates with accessory boards which feature the CAN device

conveniently11. 16-bit FSMC interface: easily connects to peripherals such as NorFlash, SRAM, etc.12. 16-bit FSMC + SPI interface: for connecting touch screen LCD13. 8-bit FSMC interface: easily connects to peripherals such as NandFlash, Ethernet, etc.14. UART1 interface: easily connects to RS232, RS485, USB TO 232, etc.15. Ethernet interface: easily connects the MCU to ethernet network by using an additional ethernet

module16. ULPI interface: for connecting high-speed USB peripheral (the STM32F407I integrates USB HS

controller without any PHY device)17. USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.18. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as

temperature sensor (DS18B20), electronic registration number (DS2401), etc. 19. 5V DC jack

20. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board

21. MCU pins connector: all the I/O ports are accessible on expansion connectors for further expansion

22. 74LVC139: used for FSMC expansion, make it possible to connect multi devices through FSMC at the same time, such as LCD and NAND FLASH

23. LEDs: convenient for indicating I/O status and/or program running state24. User key: convenient for I/O input and/or interact with running code25. Wake-Up button: wake up the STM32 MCU from sleep mode, also used as regular user key26. Joystick: five positions27. Crystal empty slot (on bottom side): for soldering 50M active crystal oscillator, which'll provide

clock to DCMI28. 74LVC139 selection jumper: for FSMC chip select29. PS/2 jumper30. LEDs jumper31. User key / joystick jumper

For jumpers 27-30:

short the jumper to connect to I/Os used in example code open the jumper to connect to other custom pins via jumper wires

What's on the Core407I

1. STM32F407IGT6: the high performance STM32 MCU which features: o Core: Cortex-M4 32-bit RISCo Feature: a full set of single-cycle DSP instructionso Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHzo Operating Voltage: 1.8V-3.6Vo Package: LQFP176o Memories: 1024kB Flash, 192+4kB SRAMo MCU communication Interfaces:

3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C 1 x FSMC, 1 x SDIO, 2 x CAN 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated

DMA, ULPI and on-chip full-speed PHY 1 x 10/100 Ethernet MAC 1 x 8 to 14-bit parallel camera interface

o AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)o Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports

IAP2. AMS1117-3.3 (on bottom side), 3.3V voltage regulator3. MIC2075 (on bottom side), onboard USB power management device4. Power supply switch, powered from 5Vin or USB connection5. Boot mode switch, for configuring BOOT0 pin6. Power indicator7. VBUS LED8. Reset button9. 8M crystal oscillator (on bottom side)10. 32.768K crystal (on bottom side), for internal RTC with calibration11. JTAG/SWD interface: for debugging/programming12. USB interface

o as DEVICE, used for establishing USB communication between PC and the STM32 development board

o as HOST, connecting to USB devices such as USB flash drive through a USB OTG cable13. MCU pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for

further expansion14. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG15. USB HOST/OTG jumper

o short the jumper when using USB HOST/OTGo open the jumper to disconnect from I/O port

16. VBAT selection jumpero short the jumper to use system power supplyo open the jumper to connect the VBAT to external power, such as battery

17. VREF selection jumpero short the jumper to connect VREF+ to VCCo open the jumper to connect VREF+ to other custom pin via jumper wire

Development ResourcesThe User Guide CD includes development resources listed as follow:

Related software (KEIL etc.) Demo code (examples in C, μC/OS-II) Schematic (PDF) STM32 development documentations (Datasheet etc.)

Package Contains

The "Standard Package" and "Accessory Boards Package" below are included.

Standard Package

1. Open407I-C development board x 12. PL2303 USB UART Board (mini) x 13. USB type A plug to mini-B plug cable x 14. USB type A receptacle to mini-B plug cable x 15. 4-pin wire x 26. 2-pin wire x 27. USB power cable x 18. User Guide CD x 1

1 2 3 4

5 6 7 8

Accessory Boards Package

1. 3.2inch 320x240 Touch LCD x 12. USB3300 USB HS Board x 13. DP83848 Ethernet Board x 14. NandFlash Board (A) x 15. NorFlash Board (A) x 16. IS62WV12816BLL SRAM Board x 17. OV9655 Camera Board x 18. Micro SD Storage Board x 19. AT45DBXX DataFlash Board x 110. FM24CLXX FRAM Board x 111. UDA1380 Board x 112. VS1003B MP3 Board x 113. Analog Test Board x 114. SN65HVD230 CAN Board 2pcs x 115. NRF24L01 RF Board (B) 2pcs x 116. Ethernet Cable x 1

1 2 3 4 5

6 7 8 9 10

11 12 13 14 15

16

II. STM32 Development boards Open407Z-C Package B (128.99$)

Website: http://www.wvshare.com/product/Open407Z-C-Package-B.htm

Overview

Open407Z-C is an STM32 development board designed for the STM32F407ZxT6 microcontroller, consists of the mother board and the MCU core board Core407Z.

The Open407Z-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32F4 series microcontrollers.

What's on the mother board

1. MCU core board connector: for easily connecting the MCU core board2. ULPI interface: for connecting high-speed USB peripheral (the STM32F407Z integrates USB HS

controller without any PHY device)3. 16-bit FSMC + SPI interface: for connecting touch screen LCD4. 8-bit FSMC interface: easily connects to peripherals such as NandFlash, Ethernet, etc.5. SPI1 / SPI2 + AD / DA interface

o for connecting SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.o for connecting AD/DA module as well, thanks to the SPI1 AD/DA alternative function

6. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI

7. I2S2 / I2S3 / I2C1: for connecting I2S peripherals, such as Audio module8. USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.9. CAN1 interface: for connecting CAN module10. CAN2 interface: for connecting CAN module11. I2C1 / I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574),

FRAM (FM24CLxx), etc.12. DCMI interface: for connecting camera module13. UART3 interface: easily connects to RS232, USB TO 232, etc.14. Ethernet interface: easily connects the MCU to ethernet network by using an additional ethernet

module15. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as

temperature sensor (DS18B20), electronic registration number (DS2401), etc.16. PS/2 interface: easily connects to PS/2 keyboard and/or mouse17. 16-bit FSMC interface: easily connects to peripherals such as NorFlash, SRAM, etc.18. 5V DC jack19. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other

user board20. MCU pins connector: all the I/O ports are accessible on expansion connectors for further

expansion21. POWER JMP

o 5VDC: powered from 5V DC jacko Core5V: powered from the MCU core board

22. LEDs jumper23. User key / Wake-Up button jumper24. Joystick jumper25. PS/2 jumper26. LEDs: convenient for indicating I/O status and/or program running state27. User key: convenient for I/O input and/or interact with running code28. Wake-Up button: wake up the STM32 MCU from sleep mode, also used as regular user key29. Joystick: five positions

For jumpers 22-25:

short the jumper to connect to I/Os used in example code open the jumper to connect to other custom pins via jumper wires

What's on the Core407Z

1. STM32F407ZxT6 (STM32F407ZET6 by default): the high performance STM32 MCU which features:

o Core: Cortex-M4 32-bit RISCo Feature: a full set of single-cycle DSP instructionso Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHzo Operating Voltage: 1.8V-3.6Vo Package: LQFP144o Memories: 512kB/1024kB Flash, 192+4kB SRAMo MCU communication Interfaces:

3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C 1 x FSMC, 1 x SDIO, 2 x CAN

1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY

1 x 10/100 Ethernet MAC 1 x 8 to 14-bit parallel camera interface

o AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)o Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports

IAP2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator3. MIC2075 (on bottom side): onboard USB power management device4. Power supply switch, powered from 5Vin or USB connection5. Boot mode switch, for configuring BOOT0 pin6. Power indicator7. VBUS LED8. Reset button9. 8M crystal oscillator (on bottom side)10. 32.768K crystal (on bottom side), for internal RTC with calibration11. JTAG/SWD interface: for debugging/programming12. USB interface

o as DEVICE, used for establishing USB communication between PC and the STM32 development board

o as HOST, connecting to USB devices such as USB flash drive through a USB OTG cable13. MCU pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for

further expansion14. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG15. USB HOST/OTG jumper

o short the jumper when using USB HOST/OTGo open the jumper to disconnect from I/O port

16. VBAT selection jumpero short the jumper to use system power supplyo open the jumper to connect the VBAT to external power, such as battery

17. VREF selection jumpero short the jumper to connect VREF+ to VCCo open the jumper to connect VREF+ to other custom pin via jumper wire

Note:

The Open407Z-C supports programming via STM32 UART bootloader, a USB TO UART accessory board is also provided in the package.The Open407Z-C does NOT integrate any debugging function, a debugger is required.

Development Resources

The User Guide CD includes development resources listed as follow:

Related software (KEIL etc.) Demo code (examples in C, μC/OS-II) Schematic (PDF) STM32 development documentations (Datasheet etc.)

Package Contains

The "Standard Package" and "Accessory Boards Package" below are included.

Standard Package

1. Open407Z-C development board x 12. PL2303 USB UART Board (mini) x 13. USB type A plug to mini-B plug cable x 14. USB type A receptacle to mini-B plug cable x 15. 4-pin wire x 26. 2-pin wire x 27. USB power cable x 18. User Guide CD x 1

1 2 3 4

5 6 7 8Accessory Boards Package

1. 3.2inch 320x240 Touch LCD x 12. USB3300 USB HS Board x 13. DP83848 Ethernet Board x 14. NandFlash Board (A) x 15. NorFlash Board (A) x 16. IS62WV12816BLL SRAM Board x 17. OV7670 Camera Board x 18. Micro SD Storage Board x 19. AT45DBXX DataFlash Board x 110. FM24CLXX FRAM Board x 111. UDA1380 Board x 112. VS1003B MP3 Board x 113. Analog Test Board x 114. SN65HVD230 CAN Board 2pcs x 115. NRF24L01 RF Board (B) 2pcs x 116. Ethernet Cable x 117.

1 2 3 4 5 6

7 8 9 10 11

12 13 14 15 16

III. ARM LPC Development Boards Open4337-C Package B (99.99$)

Website: http://www.wvshare.com/product/Open4337-C-Package-B.htm

Overview

Open4337-C is an LPC development board designed for the LPC4337JBD144 microcontroller, consists of the mother board and the MCU core board Core4337.

The Open4337-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with NXP LPC series microcontrollers.

What's on the mother board

1. MCU core board connector: for easily connecting the MCU core board 2. ZigBee connector: for connecting ZigBee module3. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as

temperature sensor (DS18B20), electronic registration number (DS2401), etc.4. I2C0 | I2C1 interface: easily connects to I2C peripherals such as I/O expander (PCF8574),

EEPROM (AT24Cxx), etc.5. I2S0 interface: for connecting I2S modules such as Audio module, etc.6. PS/2 interface: easily connects to PS/2 keyboard and/or mouse7. UART1 interface: easily connects to RS232, USB TO 232, etc.8. UART2 interface: easily connects to RS232, USB TO 232, etc.9. 8 Bit EMC interface: for connecting NandFlash module, etc.10. SSP1 interface: easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3

module, etc.11. SDIO interface: for connecting Micro SD module, features much faster access speed rather than

SPI12. ADC+DAC interface: for ADC/DAC testing13. CAN1 interface: for connecting CAN module14. CAN0 interface: for connecting CAN module15. LCD interface: for connecting touch screen LCD16. ETH interface: for connecting ETH module17. USB interface: converts to UART through an onboard USB to UART convertor PL230318. 5V DC jack19. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other

user board20. MCU pins connector: all the I/O ports are accessible on expansion connectors for further

expansion21. ZigBee programming/debugging interface: for debugging ZigBee module22. PL2303, onboard USB to UART convertor23. Power indicator24. PL2303 TX-LED / RX-LED, UART transmitting/receiving indicator25. LEDs: convenient for indicating I/O status and/or program running state26. User key: convenient for I/O input and/or interact with running code27. Joystick: five positions28. Power supply switch, 5V DC or USB29. ZigBee reset button30. PL2303 jumper: supports programming and/or UART debugging31. SD card detect jumper: enable SD card detection function32. PS/2 jumper33. LEDs jumper34. User key jumper35. Joystick jumper

For jumpers above:

short the jumper to connect to I/Os used in example code open the jumper to connect to other custom pins via jumper wires

What's on the Core4337

1. LPC4337JBD144: the LPC ARM Cortex-M4/M0 dual-core microcontroller: o Core: Cortex-M4 processor, 204MHz Maxo Core: Cortex-M0 coprocessor, 204MHz Maxo Package: LQFP144o I/Os: 83o Memories: FLASH total 1M, SRAM total 136kB, ROM 64kB, E2PROM 16kB, OTP

memory 64 bito Interfaces:

1 x SPIFI, 1 x 10/100T MAC 1 x High-speed USB2.0 Host/Device/OTG 1 x High-speed USB 2.0 Host/Device 1 x 550 UART, 3 x 550 USART, 1 x IrDA 2 x CAN 2.0, 2 x SSP, 1 x SPI, 1 x Fast-mode Plus I2C 1 x standard I2C-bus, 2 x I2S, 1 x EMC, 1 x SD/MMC 1 x PWM, 1 x QEI, 1 x 10-bit DAC, 2 x 10-bit ADC

2. AMS1117-3.3 (on bottom side), 3.3V voltage regulator3. LM3625-H (on bottom side), USB power management device4. QSPI FLASH solder pads (on bottom side), for soldering external Flash if required5. Power indicator6. USB1 VBUS LED7. USB0 VBUS LED8. Reset button9. 12M crystal oscillator10. 32.768K crystal, for internal RTC with calibration11. JTAG/SWD interface: for debugging/programming12. USB1 interface:

o Device mode: communicating with computero Host mode: communicating with USB devices (such as USB Flash Drive) through an

adapter cable13. USB0 interface, features USB OTG function14. MCU pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for

further expansion

15. 5Vin power input, power the core board from external supply (while working on USB HOST/OTG mode, a 5V power input is required)

16. BOOT configuration17. VBAT selection jumper

o short the jumper to use system power supplyo open the jumper to connect the VBAT to external power supply, such as battery

18. USB PWR OUT jumpero short the jumper: powered from USB1 VBUS (it's possible to provide power to the

mother board via the 5V pin)o open the jumper: powered from the mother board

19. USB1 jumpero short the jumper when using USB1o open the jumper to disconnect from I/O port

20. USB0 jumpero short the jumper when using USB1o open the jumper to disconnect from I/O port

Note:The Open4337-C supports programming via UART bootloaderThe Open4337-C does NOT integrate any debugging function, a debugger is required.

Development Resources

The User Guide CD includes development resources listed as follow:

Related software (KEIL etc.) Examples in C Schematic (PDF) LPC Cortex-M3/M4 development documentations (Datasheet etc.)

Package Contains

The "Standard Package" and "Accessory Boards Package" below are included.

Standard Package

1. Open4337-C development board x 12. USB type A plug to mini-B plug cable x 13. 4-pin wire x 24. 2-pin wire x 25. USB power cable x 16. User Guide CD x 17.

1 2 3 4 5 6

Accessory Boards Package

1. 3.2inch 320x240 Touch LCD x 12. DP83848 Ethernet Board x 13. UDA1380 Board x 14. Micro SD Storage Board x 15. NandFlash Board (A) x 16. Analog Test Board x 17. FM24CLXX FRAM Board x 18. AT45DBXX DataFlash Board x 19. SN65HVD230 CAN Board 2pcs x 110. Ethernet Cable x 1

1 2 3 4 5

6 7 8 9 10

IV. STM32 Development boards Open4357-C Package B (144.99$)

Website: http://www.wvshare.com/product/Open4357-C-Package-B.htm

Overview

Open4357-C is an LPC development board designed for the LPC4357FET256 / LPC4357JET256 microcontroller, consists of the mother board and the MCU core board Core4357.

The Open4357-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with NXP LPC series microcontrollers.

What's on the mother board

1. MCU core board connector: for easily connecting the MCU core board 2. SGPIO connector: for connecting camera module3. USB interface 1: USB1 FS4. USB interface 2: USB0 HS5. USB interface 3: converts to UART through an onboard USB to UART convertor PL23036. UART3 interface: easily connects to RS232, RS485, USB TO 232, etc.7. I2C0 | I2C1 interface: easily connects to I2C peripherals such as I/O expander (PCF8574),

EEPROM (AT24Cxx), etc.8. CAN1 interface: for connecting CAN module9. CAN0 interface: for connecting CAN module10. UART1 interface: easily connects to RS232, RS485, USB TO 232, etc.11. ADC+DAC interface: for ADC/DAC testing12. LCD interface 1: for connecting 7inch LCD13. SDIO interface: for connecting Micro SD module, features much faster access speed rather than

SPI14. LCD interface 2: for connecting 4.3inch LCD15. Capacitive touch screen interface: for connecting capacitive touch screen16. SSP interface: easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3

module, etc.17. ETH interface: for connecting ETH module18. I2S0 interface: for connecting I2S modules such as Audio module, etc.19. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as

temperature sensor (DS18B20), electronic registration number (DS2401), etc.20. 5V DC jack21. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other

user board22. MCU pins connector: all the I/O ports are accessible on expansion connectors for further

expansion23. JTAG interface: for debugging/programming24. AMS1117-3.3: 3.3V voltage regulator25. LM3625-H: USB power management device26. XPT2046 (on bottom side): touch screen controller27. PL2303TA (on bottom side): USB TO UART convertor28. Power indicator29. USB1 VBUS LED30. USB0 VBUS LED31. PL2303TA TX-LED / RX-LED, UART transmitting/receiving indicator32. LEDs: convenient for indicating I/O status and/or program running state33. Joystick: five positions34. User key: convenient for I/O input and/or interact with running code35. Reset button36. Power switch37. BOOT jumper38. VBAT jumper39. USB1 FS jumper40. USB0 HS jumper41. USB TO UART jumper42. LEDs jumper43. User key jumper44. Joystick jumper

What's on the Core4357

1. LPC4357FET256 / LPC4357JET256: the LPC ARM Cortex-M4/M0 dual-core microcontroller: o Core: Cortex-M4 processor, 204MHz Maxo Core: Cortex-M0 coprocessor, 204MHz Maxo Package: LBGA256o I/Os: 164o Memories: FLASH total 1M, SRAM total 136kB, ROM 64kB, E2PROM 16kB, OTP

memory 64 bito Interfaces:

1 x SPIFI, 1 x 10/100T MAC 1 x High-speed USB2.0 Host/Device/OTG 1 x High-speed USB 2.0 Host/Device 1 x 550 UART, 3 x 550 USART, 1 x IrDA 2 x CAN 2.0, 2 x SSP, 1 x SPI, 1 x Fast-mode Plus I2C 1 x standard I2C-bus, 2 x I2S, 1 x EMC, 1 x LCD controller 1 x SD/MMC, 1 x PWM, 1 x QEI, 1 x 10-bit DAC, 2 x 10-bit ADC

2. QSPI FLASH solder pads, for soldering external Flash if required3. MT48LC8M32B2, 256M Bit SDRAM4. SST39VF3201, 32M Bit NorFlash5. K9F1G08U0B, 1G Bit NandFlash6. 12M crystal oscillator7. 32.768K crystal, for internal RTC with calibration8. MCU pins expander, VCC, GND and idle I/O ports are accessible on expansion connectors for

further expansion

Note:The Open4357-C supports programming via UART bootloaderThe Open4357-C does NOT integrate any debugging function, a debugger is required.

Development ResourcesThe User Guide CD includes development resources listed as follow:

Related software (KEIL etc.) Examples in C Schematic (PDF)

LPC Cortex-M3/M4 development documentations (Datasheet etc.)

Note: the camera and capacitive touch screen drivers are not provided for the moment.

Package ContainsThe "Standard Package" and "Accessory Boards Package" below are included.

Standard Package

1. Open4357-C development board x 12. USB type A plug to mini-B plug cable x 13. USB type A receptacle to mini-B plug cable x 14. 4-pin 2-pin wires pack x 15. USB power cable x 16. User Guide CD x 1

1 2 3 4 5 6

Accessory Boards Package

1. 7inch Resistive Touch LCD x 12. DP83848 Ethernet Board x 13. UDA1380 Board x 14. Micro SD Storage Board x 15. Analog Test Board x 16. FM24CLXX FRAM Board x 17. AT45DBXX DataFlash Board x 18. SN65HVD230 CAN Board 2pcs x 19. Ethernet Cable x 110. 40-pin FFC × 111. 7inch LCD screws pack x 1

1 2 3 4 5

6 7 8 9 10 11

B.KIT DSPIC

PIC Development Boards QLdsPIC3(169.99$)

Website: http://www.wvshare.com/product/QLdsPIC3.htm

What's On Board

1. Power supply module, Jump select VDD for 5V or 3.3V2. Master controller chip module3. ICSP Connect port,it  can connect icd2/icd3/mcd2/pickit2 for program or debug4. Master controller chip ICSP I/O Pin select5. Reset key-press6. LED module7. Key-press module8. A/D converter input module9. DS18B20 digital thermometer module10. Real time clock module by PCF8583 (Battery is included) 11. 16*2-character LCD12. 16*2 LCD backlight potentiometer13. 128*64- Graphic LCD14. 128*64 LCD backlight potentiometer15. SD/MMC card Read/Write Module16. PS2 module17. CAN bus module by mcp255118. RS232 module B19. RS232 module A20. RS-485 and RS-422 communication module by MAX489E21. Ethernet module by ENC28J6022. Si3000 Voiceband Codec with MIC In/Speaker Jacks23. All pins are taken out on IDC10 connectors to make them available for further connections

Supported Devices

Included:

Preprogrammed dsPIC30F6014A MCU Card, VDD =5V, Crystal for 10MHz, On each corner of the card there is one electrolytic capacitor for stable power supply.

Optional:

Preprogrammed PIC24FJ96GA008 MCU Card, VDD =3.3V,Please set VDD jump for 3.3V, Crystal for 10MHz, On each corner of the card there is one electrolytic capacitor for stable power supply.

Preprogrammed dsPIC33FJ128GP708 MCU Card, VDD =3.3V,Please set VDD jump for 3.3V, Crystal for 10MGz, On each corner of the card there is one electrolytic capacitor for stable power supply.

Features

Open modular design： All modules can be on/off controlled by DIP switch. Each module is designed to connect to I/O port of Microcontroller. Connection of module with any port of Microcontroller is conveniently achieved through dupont thread. Connection to preset port is available by using DIP switch without dupont thread. All I/O ports are open externally with output socket. Expansion is easily accomplished.

On-board simulation debugging and Programmer interface： direct connection to ICD2 / ICD3 / MCD2 / PICKIT2

The master controller is in independent design and it's easy to change.

Examples

Sample with C30 Program sources code as below (using dsPIC30F6014):

8x LED RS232 Communication RS485 Communication

Can Communication PS2 Real time clock

Si3000 Voiceband Codec DS1820 MMC\SD card Read/Write

128x64 GLCD 1602 LCD Key-press

A/D converter

Downloads QLdsPIC3 User manual:dspic3_user_v2_en.pdf

Package Contains

1. QLdsPIC3 PIC 16 bit Development Board (including one dsPIC30F6014A MCU card, one 16*2 character LCD, 128*64 Graphic LCD)

2. RJ12 to RJ12 ICSP Cable3. RJ45 LAN Cable4. DuPont wire x 205. User Guide CD (User manual PDF in English, PCB Layout & Schematic PDF, Sample code

(C30), MPLAB IDE, Chip's Datasheet)

Note: DC9V Power adapter is NOT included.

1 2 3 4

5

C. SUMMARYBoard MCU Interface Accessory Boards Package Price Avaiable in

Vietnam

STM32 Development boards Open407I-C Package B(Click here to more detail)

STM32F407IGT6: the high performance STM32 MCU which features: o Core: Cortex-M4 32-bit RISCo Feature: a full set of single-cycle DSP instructionso Operating Frequency: 168MHz, 210 DMIPS/1.25

DMIPS/MHzo Operating Voltage: 1.8V-3.6Vo Package: LQFP176o Memories: 1024kB Flash, 192+4kB SRAM

3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C

1 x FSMC, 1 x SDIO, 2 x CAN 1 x USB 2.0 high-speed/full-speed

device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY

1 x 10/100 Ethernet MAC 1 x 8 to 14-bit parallel camera interface

1. 3.2inch 320x240 Touch LCD x 12. USB3300 USB HS Board x 13. DP83848 Ethernet Board x 14. NandFlash Board (A) x 15. NorFlash Board (A) x 16. IS62WV12816BLL SRAM Board x 17. OV9655 Camera Board x 18. Micro SD Storage Board x 19. AT45DBXX DataFlash Board x 110. FM24CLXX FRAM Board x 111. UDA1380 Board x 112. VS1003B MP3 Board x 113. Analog Test Board x 114. SN65HVD230 CAN Board 2pcs x 115. NRF24L01 RF Board (B) 2pcs x 116. Ethernet Cable x 1

130.99$

YesPrice: 3.600.000VNĐ

STM32 Development boards Open407Z-C Package B(Click here to more detail)

STM32F407ZxT6 (STM32F407ZET6 by default): the high performance STM32 MCU which features: o Core: Cortex-M4 32-bit RISCo Feature: a full set of single-cycle DSP instructionso Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHzo Operating Voltage: 1.8V-3.6Vo Package: LQFP144o Memories: 512kB/1024kB Flash, 192+4kB SRAM

3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C

1 x FSMC, 1 x SDIO, 2 x CAN 1 x USB 2.0 high-speed/full-speed

device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY

1 x 10/100 Ethernet MAC 1 x 8 to 14-bit parallel camera interface

1. 3.2inch 320x240 Touch LCD x 12. USB3300 USB HS Board x 13. DP83848 Ethernet Board x 14. NandFlash Board (A) x 15. NorFlash Board (A) x 16. IS62WV12816BLL SRAM Board x 17. OV7670 Camera Board x 18. Micro SD Storage Board x 19. AT45DBXX DataFlash Board x 110. FM24CLXX FRAM Board x 111. UDA1380 Board x 112. VS1003B MP3 Board x 113. Analog Test Board x 114. SN65HVD230 CAN Board 2pcs x 115. NRF24L01 RF Board (B) 2pcs x 116. Ethernet Cable x 1

128.99$ No

Board MCU Interface Accessory Boards Package Price Avaiable in Viet Nam

ARM LPC Development Boards Open4337-C Package B(Click here to more detail)

LPC4337JBD144: the LPC ARM Cortex-M4/M0 dual-core microcontroller: o Core: Cortex-M4 processor, 204MHz Maxo Core: Cortex-M0 coprocessor, 204MHz Maxo Package: LQFP144o I/Os: 83o Memories: FLASH total 1M, SRAM total 136kB,

ROM 64kB, E2PROM 16kB, OTP memory 64 bit

1 x SPIFI, 1 x 10/100T MAC 1 x High-speed USB2.0 Host/Device/OTG 1 x High-speed USB 2.0 Host/Device 1 x 550 UART, 3 x 550 USART, 1 x IrDA 2 x CAN 2.0, 2 x SSP, 1 x SPI, 1 x Fast-

mode Plus I2C 1 x standard I2C-bus, 2 x I2S, 1 x EMC, 1

x SD/MMC 1 x PWM, 1 x QEI, 1 x 10-bit DAC, 2 x

10-bit ADC

1. 3.2inch 320x240 Touch LCD x 12. DP83848 Ethernet Board x 13. UDA1380 Board x 14. Micro SD Storage Board x 15. NandFlash Board (A) x 16. Analog Test Board x 17. FM24CLXX FRAM Board x 18. AT45DBXX DataFlash Board x 19. SN65HVD230 CAN Board 2pcs x 110. Ethernet Cable x 1

99.99$ No

STM32 Development boards Open4357-C Package B(Click here to more detail)

LPC4357FET256 / LPC4357JET256: the LPC ARM Cortex-M4/M0 dual-core microcontroller: o Core: Cortex-M4 processor, 204MHz Maxo Core: Cortex-M0 coprocessor, 204MHz Maxo Package: LBGA256o I/Os: 164o Memories: FLASH total 1M, SRAM total 136kB,

ROM 64kB, E2PROM 16kB, OTP memory 64 bit

1 x SPIFI, 1 x 10/100T MAC 1 x High-speed USB2.0 Host/Device/OTG 1 x High-speed USB 2.0 Host/Device 1 x 550 UART, 3 x 550 USART, 1 x IrDA 2 x CAN 2.0, 2 x SSP, 1 x SPI, 1 x Fast-

mode Plus I2C 1 x standard I2C-bus, 2 x I2S, 1 x EMC, 1

x LCD controller 1 x SD/MMC, 1 x PWM, 1 x QEI, 1 x 10-

bit DAC, 2 x 10-bit ADC

1. 7inch Resistive Touch LCD x 12. DP83848 Ethernet Board x 13. UDA1380 Board x 14. Micro SD Storage Board x 15. Analog Test Board x 16. FM24CLXX FRAM Board x 17. AT45DBXX DataFlash Board x 18. SN65HVD230 CAN Board 2pcs x 19. Ethernet Cable x 110. 40-pin FFC × 111. 7inch LCD screws pack x 1

144.99$YesPrice:3.410.000VNĐ

PIC Development Boards QLdsPIC3(Click here to more detail)

dsPIC30F6014A: 24-bit wide instructions, 16-bit wide data path 16 x 16-bit working register array Up to 30 MIPs operation: DC to 40 MHz external clock input Internal FRC input with PLL active (4x, 8x, 16x) 4 MHz-10 MHz oscillator input with PLL active (4x,

8x, 16x) 10 MHz - 20 MHz oscillator input in HS/2 or HS/3

with PLL active (4x, 8x, 16x)v

Opitional: PIC24FJ96GA008 or dsPIC33FJ128GP708

SD/MMC card Read/Write Module PS2 module CAN bus module by mcp2551 RS232 module B RS232 module A RS-485 and RS-422 communication

module by MAX489E Ethernet module by ENC28J60 Si3000 Voiceband Codec with MIC

In/Speaker Jacks

Packet in Viet Nam:1. Character LCD Module LCD1602 x12. Graphic / character LCD modules

LCD12864 (with Chinese character) x13. DC power supply (input 100-240V ~

50/60Hz, Output 9V-500mA) x1

169.99$Yes,Price:3.900.000VNĐ