BO Shifting Tool
-
Upload
jaime-andres-villegas-mansilla -
Category
Documents
-
view
31 -
download
2
description
Transcript of BO Shifting Tool
-
These instructions describe results from the use of Halliburton Equipment, but such results are not guaranteed. Operations of equipment is subject to mechanical limitations and Halliburton shall only be liable for merchandise and service as set forth in its general terms and contract Page 1 of 1
BO SHIFTING TOOL
A
B
Physical / Functional Checks Pass Fail
1. Confirm sucker rod threads will make up firmly to new threaded component
2. Confirm both fishing neck shoulders are sharp and have clean edges
3. Confirm the socket screw makes-up firmly against core 4. Confirm shear shoulder of shear pin hole is square and not
starting to round off.
5. Confirm key retainers are installed in right position as per diagram. NOTE - If key retainers are installed in wrong position it WILL cause a misrun and could result in a fishing job.
6. Confirm locater keys are held out firmly by key springs. 7. With shear pin removed, confirm locater keys will move
freely into released position.
8. Confirm all threaded connections are tight (top sub and core nut)
9. Confirm shear pin is not pre-sheared at all 10. Confirm that the tungsten carbide wear inserts in the keys
are visible
11. Confirm that the springs behind the keys have been installed the correct way up (especially on the 4.562 shifting tool) NOTE if springs are installed the wrong way up the keys may not collapse below SSD ID and the tool may become jammed
Critical Dimension Checks Pass Fail
1. Check and record max tool OD, dimension A 2. Check and record max tool OD, dimension B
Tool P/N 42 BO 116 124 118 178 146 146 260/204
Tool size 1.875 2.188 2.313 2.562 2.750 2.813 3.125
Max OD (Dim. B) 1.843 2.141 2.156 2.530 2.718 2.718 3.060
Fish neck OD 1.375 1.750 1.750 1.750 2.313 2.313 1.750
Tool will engage 1.875 2.188 2.313 2.562 2.750 2.813 3.125
Expanded Key OD (Dim. A)
2.1082.210
2.5902.670
2.5922.701
2.966 3.123
3.015 3.156
3.0153.156
3.4863.604
Tool P/N 42 BO 154 242/213 238/215 255 171 207 153
Tool size 3.313 3.437 3.688 3.813 4.125 4.313 4.562
Max OD (Dim. B) 3.250 3.410 3.670 3.810 3.850 4.250 4.520
Fish neck OD 2.313 2.313 3.125 1.750 2.313 2.313 3.125
Tool will engage 3.313 3.437 3.688 3.813 4.125 4.313 4.562
Expanded Key OD (Dim. A)
3.6163.734
4.0804.140
4.1504.250
4.260 4.320
4.360 4.504
4.8384.918
4.9255.068
Key Retainers
PositionRight
PositionWrong