Bo le Labeling Machine - SUMEVEThe first time you use this machine, you need to position the label...
Transcript of Bo le Labeling Machine - SUMEVEThe first time you use this machine, you need to position the label...
EN
Bo�le Labeling Machine
PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATION
Model: MT-30
Easy and convenient solution for packing
www.sumeve.com
OUR MAIN PRODUCTS
www.sumeve.com
Filling MachineLiquid Filling MachineLiquid & Paste Filling MachineHorizontal Filling Machine
Sealing Machine
Continuous Sealing Machine
Foot Pedal Sealing Machine
Can Sealing Machine
Handheld Bag Heat Machine
Induction Sealing Machine
Sausage Cilpper Sealing Machine
Coding Machine Hot Printing Machine
Portable Handheld Inkjet PrinterSolid Ink Coding Machine
Label Machine
Weighing & Packing Machine
Automatic Labeling Machine Manual Labeling Machine
Multi-function Filling Machine
Bagging Machine Powder Filling Machine
Accessories Accessories Consumables
About Us About Sumeve: We are a company specialized in producing and developing packaging machinery and equipment. Our products : all kinds of filling machine, sealing machine, packing machine, coding machine and other mechanical equip-ment,We also customize all kinds of packaging machinery according to customer needs.If you need,please call us and we will provide customize service for you
CHECK OUT ALL OUR PRODUCTS AT WWW.SUMEVE.COM
WARNING!Read the following instructions before using the product!
These instructions below are for your safety. Please read through them thoroughly before use and retain them for future reference. Familiarize yourself with them to reduce hazards like personal injuries and damage to property.
TABLE OF CONTENTS020203030404
How To Opreate
Product Specifications
Notice
Customer Service
MT30 Lable MachioneModel:
How To Install
Common problems and solutions
01
02
Product Specifications
Model: MT-30
Labeling Speed:20-50pcs/min
Dimensions: 26"×14"×17"Label outer diameter: <275mm
Label inner diameter: >40mm (best size φ75mm)
Labeling Accuracy:+/-0.5mm
(related to bottle label size)
Label Width: 25-150mmLabel Length: 25-300mm
How To Install
Notice
How To Operate The first time you use this machine, you need to position the label manually(-by moving the tag locator-1)When the round bottle has just finished wrapping ,the first tag, the tag locator must be at the beginning of the next tag.Then check if the tag locator is at the beginning of the next label. T.his will tell you if the last label has been wrapped
Applicable to label: label diameter,φ40mm-120mm(1.6"-4.7") (best for 75mm) label. The smallest label size: (width)25mm×(length)25mm (1"×1"); the largest label size: (width)150mm×(length)300 mm (6"×12").
Applicable to bottle: round bottles (not applicable to bottles of other shapes), PET bottles, plastic bottles, glass bottles, metal bottles and other materials bottles.
This semi-automatic round bottle labeling machine does not come with the function of printing the production date (the function of printing the production date can be additionally installed).
03
Common problems and solutions
04
Problems: During the labeling process, the distance between the two labels is unstable when the label is issued
NO.1
Answer: The reason for the unstable distance between double labels, first check whether the label is too close or too far away from the round bottle of the product to be labeled. The bottle should be about 2 or 3 mm away from the label. If you cannot solve the problem of unstable spacing, you can directly consult the engineer of the labeling machine manufacturer.
NO.2Problems: The bottom paper often breaks
2. Whether the bottom paper of the label has broken marks, it may be that the bottom paper has been cut, be careful not to be cut
1. Check if the rear tray is too tightAnswer:
NO.3Problems: The label will be wrinkled and cannot be attached
Answer: 1. First check whether the label is too thin, and the problem caused by it2. Whether the labelled bottle is very irregular or not round3. Check whether the peeling label board and the rubber-coated shaft are too close, because being too close will cause the label to wrinkle. Adjust the peeling label board. At the same time, there is a roller under the peeling label board and adjust it outward. Let the head of the label lean outside the encapsulation shaft4. Check whether each labelled bottle is wrinkled, if it happens occasionally, it is usually the cause of the bottle itself
After you receive the machine and during the usage of the machine. No matter what problem you meet you can contact us ([email protected]), and we will support you within 12 hours. We offer one year guarantee, that means, within one year, no matter what kind of problem happened to the machine, contact our support and we will solve the problem.even if over one year, we can also help to provide spare parts and technical supports
Customer Service
www.sumeve.comEasy and convenient solution for packing
B www.sumeve.com/blog S [email protected] S [email protected]