Materials:

0.81.1 m striped fabric (150 cm wide) Interfacing for the facings Embroidery accessories BERNINA Collection 6 'Silk Road Elegance' embroidery card

BERNINA artista 730 with embroidery module Mega Hoop Pattern

Cutting out:

1x front to fabric fold 2x front facing to fabric fold 1x back to fabric fold 2x back facing to fabric fold 2-sleeve ribbing: 31/32/33/34.5/35.5 x 6cm, finished width 3cm

Blouse Size 36-44

Instructions 1. Embroider bottom edges. To do this, arrange designs 28 and 25 in the mega hoop or in the Border Embroidery Program. Cut out scalloped edge.

2. Close shoulder seams. Gather front and back sections. Close shoulder seams of facing sec-tions. With right sides facing, stitch together neckline edges and turn. Sew on facings. Iron seam allowance into the facing. Neaten inside-facing edges and stitch in the ditch from the right side.

3. Close side seams up to the sleeve-vent marking. Gather sleeves at the top. Snip seam allow-ances up to the last stitch. With right sides facing, sew on ribbing. Close seam. Turn under raw edges, pin, and stitch in the ditch from the right side.

Layout Plan for Gluing Together the DIN A4 Pages Printing out the pages: Deactivate the function automatically adjusting the page to the paper size or printing area. Page Adjustment None must be switched on. Only in this way will the pages print out in the original size, i.e. 100%. To check the printout measure the test square. After printing out the pages, cut along the lines of the right edge and bottom edge of each page. Glue together page-by-page and row-by-row. Cut out pattern in your size.