Universal Boring Pattern

Cabinet type Runner system Description Page

34-1/2” base All Line bore pattern for all base cabinets 1

34-1/2” base All Base types with cross rail positions 2

34-1/2” base All Base door and drawer front heights 3

34-1/2” base METABOX Base pattern: all 320M drawers 4

34-1/2” base METABOX Base pattern: 320M & 320H drawers 5

34-1/2” base TANDEM / SOLO Base pattern: 4” & 8” drawers 6

34-1/2” base STANDARD Base pattern: 4” & 8” drawers 7

34-1/2” base TANDEMBOX Base pattern: 358M drawers 8

TANDEMBOX Bottom drawer template instructions 9

32” vanity All Line bore pattern for all vanity cabinets 10

32” vanity All Vanity types with cross rail positions 11

32” vanity All Vanity door and drawer front heights 12

32” vanity METABOX Vanity pattern: 320M drawers 13

32” vanity METABOX Vanity pattern: 320M & 320H drawers 14

32” vanity TANDEM / SOLO Vanity pattern: 4” & 8” drawers 15

32” vanity STANDARD Vanity pattern: 4” & 8” drawers 16

32” vanity TANDEMBOX Vanity pattern: 358M drawers 17

28-1/4” desk All Line bore pattern for all desk cabinets 18

28-1/4” desk All Desk types with cross rail positions 19

28-1/4” desk All Desk door and drawer front heights 20

28-1/4” desk METABOX Desk pattern, 320H, 320M& 320N 21

28-1/4” desk TANDEM / SOLO Desk pattern: 3”, 4”, 8” & 10” drawers 22

28-1/4” desk STANDARD Desk pattern: 3”, 4”, 6” & 10” drawers 23

28-1/4” desk TANDEMBOX Desk pattern: 358M drawers 24

Wall cabinets Wall pattern: 30-1/2”, 28”, 24-3/16” 25

Wall cabinets Wall pattern: 20-7/16”, 16-5/8”, 12-7/8” 26

Standardization for effi cient cabinet production

• One line bore pattern works with all eight of Blum’s

drawer systems.

• Hinge drilling positions are balanced on all doors.

• Drawer front heights are optimized.

• Cross rails can be placed between all drawers.

• 3/4” or 5/8” panel thickness can be used.

• Clearance for BLUMOTION closing mechanisms on

TANDEM and TANDEMBOX drawers is provided.

Table of Contents

Revised 4/12/04

Base 34-1/2"

Vanity32"

Desk 28-1/4"

Wall30-1/2"

Wall28"

Wall24-3/16"

Wall20-7/16"

Wall16-5/8"

Wall12-7/8"

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788

93 517

37

610 (24")

46.5

672

(22

hole

s)56

.5

Ø 5 typ.

19 (

3/4"

)

Base bore pattern for all Blum runners 1:8023/25/03 1

19 (

3/4"

)

102

(4")

775

(30

1/2"

)

775

(30

1/2"

)

76 192 37

305 (12")

76 192 37

305 (12")

Standard 24" base cabinet Shallow 12" base cabinet 30-1/2" wall cabinet

32 c

. to

c. ty

p.

224

Center row of holes req'd. for TANDEMBOX

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 Base cabinet types 1:8023/25/04 2

293

161.

516

1.5

159

(D) 4 drawers

283.

5

445

606.

5

(A) 1 door

System hole locations for hinge mounting plate- Measured from bottom of cabinet side

< Reveal dimensions Front dimensions

62.5

640

62.5

765(30-1/8")

< 10 (3/8")

46.578.5

686.5718.5

102

(4")

775

(30

1/2"

)

616

159

(B) 1 drawer, 1 door

606.

5

19 (

3/4"

)

326.

528

9.5

159

(C) 3 drawers

317

606.

5

Cross rail positions

Centerline dimension of cross rails if material other than 3/4" is used

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788

(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door

285(11-1/4")

157(6-3/16")

157(6-3/16")

157(6-3/16")

317(12-1/2")

285(11-1/4")

157(6-3/16")

157(6-3/16")

765(30-1/8")

102

(4")

775

(30

1/2"

)

(A) 1 door

Base cabinet door & drawer front heights 1:8012/21/03 3

Reveal dimensions

Cabinet

10 (3/8") 10 (3/8")

3 (1/8")

10 (3/8")

3 (1/8")

10 (3/8")

3 (1/8")

3 (1/8")

3 (1/8")3 (1/8")605

(23-13/16")

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 METABOX base pattern - all 320M 1:8023/25/04 4

317(12-1/2")

285(11-1/4")

(C) 3 drawers

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

3864320M

285(11-1/4")

(D) 4 drawers

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

38

157(6-3/16")

38

157(6-3/16")

3864320M

64320M

64320M

62.5

480

62.5

605(23-13/16")

(B) 1 drawer, 1 door

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

3864320M

C, D -110.5

D - 398.5

D - 558.5

B, C, D - 718.5

C - 430.5

System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole

< Reveal dimensions Front heights

526.5558.5

46.578.5

Optional galleries

Optional galleries

3838

3864320M

6464

64320M

6464

64320M

6464

Optional galleriesOptional galleries

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 METABOX base pattern - 320M & 320H 1:8023/25/04 5

62.5

480

62.5

605(23-13/16")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

38

46.578.5

526.5558.5

64320M

317(12-1/2")

285(11-1/4")

(C) 3 drawers

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

3864320M

285(11-1/4")

(D) 4 drawers

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

38

157(6-3/16")

38

157(6-3/16")

3864320M

64320M

64320M

(B) 1 drawer, 1 door

C, D -174.5

D - 398.5

D - 558.5

B, C, D - 718.5

C - 494.5

System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole

< Reveal dimensions Front heights

64320H

6464320H

64

64320H

6410

2

102

102

Optional galleries

Optional galleries

Optional galleries

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788

D - 334.5

D - 494.5

B, C, D - 654.5

C - 366.5

C, D - 46.5

TANDEM / SOLO pattern 1:8023/25/04 6

62.5

480

62.5

605(23-13/16")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")10

2(4

")

24

Use lower holes on bottom drawers only

Upper

Lower

Runner mounting holesSystem hole location for cabinet profile- Measured from bottom of cabinet side

526.5558.5

46.578.5

317(12-1/2")

285(11-1/4")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")10

2(4

")

24

203

(8")

36

203

(8")

24

285(11-1/4")

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

157(6-3/16")

157(6-3/16")

102

(4")

24

102

(4")

24

203

(8")

36

102

(4")

24

Drawer box heightBox to front dimension

(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door

Tilt top drawer slightly toinstall & remove when

using SOLO runners

< Reveal dimensions Front heights

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788

D - 334.5

D - 494.5

B, C, D - 654.5

C - 366.5

C, D - 46.5

STANDARD runners base pattern 1:8023/25/04 7

62.5

480

62.5

605(23-13/16")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")10

2(4

")

32

526.5558.5

46.578.5

System hole location for cabinet profile- Measured from bottom of cabinet side- For 430 series use next highest hole

Drawer box heightBox to front dimension

317(12-1/2")

285(11-1/4")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

203

(8")

32

203

(8")

32

102

(4")

32

285(11-1/4")

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

157(6-3/16")

157(6-3/16")

203

(8")

32

102

(4")

32

102

(4")

32

102

(4")

32

(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door

Tilt top drawer slightly to install & remove

< Reveal dimensions Front heights

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788

62.5

480

62.5

605(23-13/16")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

61526.5558.5

46.578.5

System hole location for cabinet profile- Measured from bottom of cabinet side

C, D - 58.5

D - 334.5

D - 494.5

B, C, D - 654.5

C - 366.5

TANDEMBOX base pattern 1:8043/25/04 8

317(12-1/2")

285(11-1/4")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

61

285(11-1/4")

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

157(6-3/16")

157(6-3/16")

6161

6132358M

32358M

32358M

32358M32358M

6464

32358M + Gal.

(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door

< Reveal dimensions Front heights

Out of system hole see Pg. 9

7364

6432358M + Gal.

7361

6464

32358M + Gal.

Optional galleries

Optional galleries Optional galleries

Julius Blum, IncStanley, NC 281641-800-438-6788

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

58.5

The lower holes on 358M TANDEMBOX runners are not accessable. Mounting holes must be manually drilled only for the bottom drawer at 58.5mm.For accuracy make the drilling template shown.

224 37

39.5

19 (3

/4")

37224

eq.

eq.

79 (3

1/8

")

42 (1 5/8")

16 (5/8")

13 (1/2")

102

(4")

Ø 5mm (3/16") drill bushing

Drilling Template Side View Section

39.5

Template positioned in cabinet

Template for TANDEMBOX bottom drawers 3/25/03 00 1:5 9

Special drilling for bottom drawer

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788

80 453

37

533 (21")

46.5

608

(20

hole

s)56

.5

19 (

3/4"

)

Vanity bore pattern for all Blum runners 1:8003/12/04 10

19 (

3/4"

)

102

(4")

711

(28"

)

357

192 37

457 (18")

Vainty cabinet - 21" deep Vanity cabinet - 18" deep

32 c

. to

c. ty

p.

224

Center row of holesreq'd. for TANDEMBOX

Ø 5 typ. Ø 5 typ.

100

813

(32"

)

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 Vanity cabinet types 1:8013/25/04 11

229

161.

516

1.5

159

(D) 4 drawers(A) 1 door

System hole locations for hinge mounting plate- Measured from bottom of cabinet side

< Reveal dimensions Front dimensions

62.5

576

62.5

701(27-5/8")

< 10 (3/8")

46.578.5

622.5654.5

102

(4")

711

(28"

)

552

159

(B) 1 drawer, 1 door

19 (

3/4"

)

294.

525

7.5

159

(C) 3 drawers

Cross rail positions

285

542.

5

219.

5

381

542.

5

542.

5

Centerline dimension of cross rails if material other than 3/4" is used

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788

(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door

102

(4")

711

(28"

)

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 METABOX vanity pattern - all 320M 1:8024/12/04 13

253(9-15/16")

285(11-1/4")

(C) 3 drawers

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

3864320M

221(8-11/16")

(D) 4 drawers

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

38

157(6-3/16")

38

157(6-3/16")

38

62.5

416

62.5

541(21-5/16")

(B) 1 drawer, 1 door

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

3864320M

C, D -110.5

C - 398.5

D - 494.5

B, C, D - 654.5

D - 334.5

System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole

< Reveal dimensions Front heights

462.5494.5

46.578.5 64320M

6438

64320M

64320M

64320M

Optional galleries

Optional gallery

64320M

6464

64320M

6464

3838

Optional galleries

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 METABOX vanity pattern - 320M and H 1:8024/12/04 14

253(9-15/16")

285(11-1/4")

(C) 3 drawers

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

3864320M

221(8-11/16")

(D) 4 drawers

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

38

157(6-3/16")

38

157(6-3/16")

38

62.5

416

62.5

541(21-5/16")

(B) 1 drawer, 1 door

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

3864320M

C, D -174.5

C - 398.5

D - 494.5

B, C, D - 654.5

D - 334.5

System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole

< Reveal dimensions Front heights

462.5494.5

46.578.5

64320M

64320M

64320M

64320H

64320H

64320H

102

102

102

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 TANDEM / SOLO vanity pattern 1:8024/12/04 15

253(9-15/16")

285(11-1/4")

(C) 3 drawers

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

221(8-11/16")

(D) 4 drawers

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

157(6-3/16")

62.5

416

62.5

541(21-5/16")

(B) 1 drawer, 1 door

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

C, D - 46.5

C - 334.5

D - 430.5

B, C, D - 590.5

D - 270.5

System hole location for cabinet profile.- Measured from bottom of cabinet side.

< Reveal dimensions Front heights

462.5494.5

46.578.5

157(6-3/16")

203

(8")

36

203

(8")

24

102

(4")

24

102

(4")

24

102

(4")

24102

(4")

24

152

(6")

36

102

(4")

24

Use lower holes on bottom drawers only

Upper

Lower

Runner mounting holes

Tilt top drawer slightly toinstall & remove when

using SOLO runners

Drawer box heightBox to front dimension

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 Standard runners vanity pattern 1:8024/12/04 16

253(9-15/16")

285(11-1/4")

(C) 3 drawers

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

221(8-11/16")

(D) 4 drawers

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

157(6-3/16")

62.5

416

62.5

541(21-5/16")

(B) 1 drawer, 1 door

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

C, D - 46.5

C - 334.5

D - 430.5

B, C, D - 590.5

D - 270.5

< Reveal dimensions Front heights

462.5494.5

46.578.5

157(6-3/16")

Drawer box heightBox to front dimension

102

(4")

32 102

(4")

32 102

(4")

32

102

(4")

32

102

(4")

32

203

(8")

32

203

(8")

32

152

(6")

32

System hole location for cabinet profile- Measured from bottom of cabinet side- For 430 series use next highest hole

Tilt top drawer slightly to install & remove

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 TANDEMBOX vanity pattern 1:8013/25/04 17

253(9-15/16")

285(11-1/4")

(C) 3 drawers

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

221(8-11/16")

(D) 4 drawers

< 3 (1/8")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

157(6-3/16")

62.5

416

62.5

541(21-5/16")

(B) 1 drawer, 1 door

< 3 (1/8")

< 10 (3/8")

157(6-3/16")

C, D - 58.5

C - 334.5

D - 430.5

B, C, D - 622.5

D - 270.5

< Reveal dimensions Front heights

462.5494.5

46.578.5

157(6-3/16")

32358M 32358M 32358M

32358M

32358M

358M + Gal.

6432

73

Out of system hole see Pg. 9

61 61 6161

61

Optional galleries

Optional gallery

Optional galleries

6464

32358M + Gal.

6464

32358M + Gal.

7361

System hole location for cabinet profile- Measured from bottom of cabinet side

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788

93 517

37

610 (24")

46.5

608

(20

hole

s)56

.5

19 (

3/4"

)

Desk bore pattern for all Blum runners 1:8003/26/04 18

19 (

3/4"

)

102

(4")

615

(24

3/16

")

Desk cabinet - 24" deep

32 c

. to

c. ty

p.

224

717

(28

1/4"

) Ø 5 typ.

Center row of holesreq'd. for TANDEMBOX

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 Desk cabinet types 1:8003/25/04 19

(A) 1 door

System hole locations for hinge mounting plate- Measured from bottom of cabinet side

< Reveal dimensions Front dimensions

62.5

480

62.5

605(23-13/16")

< 10 (3/8")

46.578.5

102

(4")

615

(24

3/16

")

339.

527

5.5

(B) 2 drawers

349

19 (

3/4"

)

339.

512

814

7.5

(C) 3 drawers34

9

477

Cross rail positions

Centerline dimension of cross rails if material other than 3/4" is used

686.5718.5

147.

516

014

7.5

(C) 4 drawers

157

477

160

317

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788

(C) 3 drawers(B) 2 drawers

253(9-15/16")

605(23-13/16")

102

(4")

615

(24

3/16

")

(A) 1 door

Desk cabinet door & drawer front heights 1:8003/25/04 20

Reveal dimensions

Cabinet

10 (3/8") 10 (3/8")

3 (1/8")

125(4-15/16")

10 (3/8")

3 (1/8")

349(13-3/4")

349(13-3/4")

125(4-15/16")3 (1/8")

(D) 4 drawers

10 (3/8")

3 (1/8")

157(6-3/16")

125(4-15/16")3 (1/8")

157(6-3/16")

157(6-3/16")

3 (1/8")

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 METABOX desk pattern 1:8003/25/04 21

(C) 3 drawers (D) 4 drawers(B) 2 drawers

< 10 (3/8")

D -110.5

C, D - 558.5

C, D - 430.5

System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole (H and M drawers only)

< Reveal dimensions Front heights

102

64320H

96.5

32

241

< 3 (1/8")

102

64320H

96.5

32

241

32320N125

(4-15/16")

38

125(4-15/16")

3832320N

64320H10

2

349(13-3/4")

253(9-15/16")

< 3 (1/8")

< 3 (1/8")

125(4-15/16")

3864320M

64320M

157(6-3/16")

38

157(6-3/16")

3864320M

157(6-3/16")

38 < 3 (1/8")

< 3 (1/8")

< 10 (3/8") < 10 (3/8")

32320N

B, C -174.5

D -270.5

B - 526.5

349(13-3/4")

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 TANDEM / SOLO desk pattern 1:8003/25/04 22

(C) 3 drawers (D) 4 drawers(B) 2 drawers

< 10 (3/8")

B, C, D -46.5

B, C - 398.5

< Reveal dimensions Front heights

< 3 (1/8")

125(4-15/16")

349(13-3/4")

253(9-15/16")

< 3 (1/8")

< 3 (1/8")

125(4-15/16")

157(6-3/16")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8") < 10 (3/8")

D -206.5

C, D - 526.5

125(4-15/16")

< 3 (1/8")

157(6-3/16")

157(6-3/16")

349(13-3/4")

203

(8")

2425

4(1

0")

36

254

(10"

)

36

76 (3")

24

76 (3")

24 76 (3")

24

102

(4")

24

102

(4")

24

102

(4")

36

D - 366.5

Use lower holes on bottom drawers only

Upper

Lower

Runner mounting holes

Tilt top drawer slightly toinstall & remove when

using SOLO runners

Drawer box heightBox to front dimension

System hole location for cabinet profile.- Measured from bottom of cabinet side.

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 Standard runner desk pattern 1:8003/25/04 23

(C) 3 drawers (D) 4 drawers(B) 2 drawers

< 10 (3/8")

B, C, D -46.5

B, C - 398.5

< Reveal dimensions Front heights

< 3 (1/8")

125(4-15/16")

349(13-3/4")

253(9-15/16")

< 3 (1/8")

< 3 (1/8")

125(4-15/16")

157(6-3/16")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8") < 10 (3/8")

D -206.5

C, D - 526.5

125(4-15/16")

< 3 (1/8")

157(6-3/16")

157(6-3/16")

349(13-3/4")

D - 366.5

Drawer box heightBox to front dimension

102

(4")

32

102

(4")

32

102

(4")

32

76 (3")

32

76 (3")

32

76 (3")

32

254

(10"

)

32

254

(10"

)

32

152

(6")

32

System hole location for cabinet profile- Measured from bottom of cabinet side- For 430 series use next highest hole

Tilt top drawer slightly to install & remove

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 TANDEMBOX desk pattern 1:8003/25/04 24

(C) 3 drawers (D) 4 drawers(B) 2 drawers

< 10 (3/8")

B, C - 398.5

< Reveal dimensions Front heights

< 3 (1/8")

125(4-15/16")

349(13-3/4")

253(9-15/16")

< 3 (1/8")

< 3 (1/8")

125(4-15/16")

157(6-3/16")

< 3 (1/8")

< 3 (1/8")

< 10 (3/8") < 10 (3/8")

D -206.5

C, D - 526.5

125(4-15/16")

< 3 (1/8")

157(6-3/16")

157(6-3/16")

349(13-3/4")

D - 366.5

B, C, D - 58.5

Out of system hole see Pg. 9

3212

8

358M + Gal.

61

32358M

32358M

32358M

32358N32358N

32358N

6161

464646

73 73

358M + Gal.

6432

3296

358M + Gal.

6432

3296

System hole location for cabinet profile- Measured from bottom of cabinet side

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 Wall cabinet patterns 1:8003/29/04 25

775

(30

1/2"

)

76 192 37

305 (12")

30-1/2" wall cabinet

62.5

640

62.5

765(30-1/8")

< 10 (3/8")

46.578.5

686.5718.5

62.5

576

62.5

701(27-5/8")

< 10 (3/8")

46.578.5

622.5654.5

22 h

oles

20 h

oles

711

(28"

)

62.5

480

62.5

605(23-13/16")

< 10 (3/8")

46.578.5

526.5558.5

17 h

oles

615

(24

3/16

")

28" wall cabinet 24-3/16" wall cabinet

Drawing No.Date Author

Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted

Page No.ScaleIndexDescription

BUS0126MLY

®

Blum, IncStanley, NC 281641-800-438-6788 Wall cabinet patterns 1:8003/29/04 26

20-7/16" wall cabinet 16-5/8" wall cabinet 12-7/8" wall cabinet

62.5

384

62.5

509(20-1/16")

< 10 (3/8")

46.578.5

430.5462.5

14 h

oles

519

(20

7/16

")

62.5

288

62.5

413(16-1/4")

< 10 (3/8")

46.578.5

334.5366.5

11 h

oles

423

(16

5/8"

)

62.5

192

62.5

317(12-1/2")

< 10 (3/8")

46.578.5

238.5270.5

8 ho

les

327

(12

7/8"

)