blum modul

24
268 MODUL – hinge system Slide-on hinge system MODUL – hinges This economical hinge system provides the right solution for many different applications. The system‘s combined slide-on and screw-fix feature has proven itself over the years. Simple and easy slide-on assembly Simple 3-way adjustment for perfect gap alignment Simple “slide-on” door to cabinet assembly Catalogue 2011

description

blum

Transcript of blum modul

Page 1: blum modul

268

MODUL – hinge systemSlide-on hinge system

MODUL – hinges

This economical hinge system provides the right solution for many different applications. The system‘s combined slide-on and screw-fix feature has proven itself over the years.

■Simple and easy slide-on assembly■Simple 3-way adjustment for perfect gap

alignment

Simple “slide-on” door to cabinet assembly

Catalogue 2011

Page 2: blum modul

269

Symbol photo

Symbol photo

Symbol photo

Catalogue 2011

MODUL – hinges ▶Overview ▶▶

MODUL – hinges

Accessories

Assembly, removal and adjustment

Pictograph

Mounting platesCover caps

284

ScrewsCentre bitDoor bufferScrewdriver

287288288288289

Assembly and removalAdjustment

290290

Item Available Upon Request

Accessories

General Information

Opening angle

Overlay application

Dual application

Inset application

Blind corner applications

Angled application inset

Angled application half overlay

Angled application overlay

Angled application max. overlay

Angled application mitered

Hinge with straight hinge arm

Hinge with cranked hinge arm

Hinge with double cranked hinge arm

Screw-on boss

EXPANDO-boss

Knock-in boss

Insertion ram for knock-in boss

Cover caps

Planning

Assembly, removal and adjustment

MODUL – hinge system

Overview – hingesOverview – angled applications

270271

MO

DUL

Page 3: blum modul

270 Catalogue 2011

MODUL – hinge systemMODUL – hinges▶Overview – applications▶▶

Application Boss FixingHinge applicationsStandard application

100°-hinge272

170°-hinge274

Profile door applicationProfile/thick door hinge

276Blind corner applications

Blind corner hinge inset application 278

Refrigerator applicationRefrigerator/appliance hinge 280

Angled application – standard

+45° angled hinge282

MO

DUL

Page 4: blum modul

271

MODUL – hinge systemMODUL – hinges ▶

Overview – angled applications ▶▶

Angled application – standard283 283 45°

Doo

r hei

ght (

mm

)

* kg

Number of HingesThe number of hinges depends on the front weight.

To achieve good stability, distances between hinges should be as large as possible.

Indications on weight and height apply to a standard door width of 600 mm.

Info box

MO

DUL

Catalogue 2011

Take advantage of DYNALOG limited included free on the DVD.■DYNAPLAN – cabinet planning incl. a collision check and fittings selection■DYNACAT – electronic product catalogue and CAD data export (dxf, dwg, igs, sat, x_t, jpg)■DYNASHOP – shopping basket and ordering function

Page 5: blum modul

272

MODUL – hinge systemMODUL – hinges▶Standard application▶▶

100°-hinge

Order informationOverlay application Dual application Inset application

Screw-on boss

Steel bossPart no.

91M2550 with spring

Screw-on boss

Steel bossPart no.

91M2650 with spring

Screw-on boss

Steel bossPart no.

91M2750 with spring

Knock-in boss

Steel boss 91M2580

MZM.0040

with spring

40 Knock-in boss

Steel boss 91M2680

MZM.0040

with spring

40 Knock-in boss

Steel boss 91M2780

MZM.0040

with spring

40

SteelPlainScreen print

Cover caps

90M2603 90M2603.BL

Blum

nickel plated

Accessories

SteelPlainScreen print

Cover caps

90M2603 90M2603.BL

Blum

nickel plated

Accessories

Accessories – general

3.5 x3.5 x

15 mm17 mm

Chipboard screws for hinge boss fixing

609.1500 609.1700

Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804

- All metal hinge, nickel plated- 100° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)

Catalogue 2011

SteelPlainStamped

Cover caps

90M2503 90M2503.BP

Blum

nickel plated

Accessories

MO

DUL

Page 6: blum modul

20

58

119F

3-6

1.5

30

58

18.5

3-6

F

38

58

7F

3-6

27

min 10.5

3-6

35 9.5

45

8

min 10.5

3-6

35

37

57 3.2

273Catalogue 2011

Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)Hinge and door protrusion at full opening angle

F Gap Set mounting plate back by door thickness

MODUL – hinge systemMODUL – hinges ▶

Standard application ▶▶

100°-hingePlanning

Overlay application Dual application Inset application

Drilling distance

Mounting plate

Front overlay5 6 7 8 9 10 11 12 13 14 15 16 17

0 3 4 5 6

3 3 4 5 6

9 3 4 5 6

-

Mounting plate

Front overlay-4.5 -3.5 -2.5 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5

0 3 4 5 6

3 3 4 5 6

9 3 4 5 6

-

Mounting plate

Front overlay -4 -3 -2 -1

0 3 4 5 6

3

9

-

Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingThickness of door

16 18 19 20 21 22 24 26 28 30 31 323 0.3 0.5 0.7 1.0 1.3 1.6 3.34 0.3 0.5 0.7 1.0 1.2 1.6 3.25 0.3 0.5 0.7 0.9 1.2 1.5 2.66 0.3 0.5 0.7 0.9 1.1 1.4 2.4-

Drilli

ng d

is-ta

nce In these cases a trial is

recommended

Additional for + 2 mm side adjustment+ 0.1 + 0.3 + 0.3 + 0.4 + 0.4 + 0.5 + 0.4

Adjustment

max. ± 3.0 mm

+

-± 2.0 mm ± 2.0 mm+

- -+

See mounting plates

Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.

Screw-on Knock-in Hinge boss dimensions

MO

DUL

Page 7: blum modul

274

MODUL – hinge systemMODUL – hinges▶Standard application▶▶

170°-hinge

Order informationOverlay application Dual application Inset application

Screw-on boss

Steel bossPart no.

91A6550 with spring

Screw-on boss

Steel bossPart no.

91A6650 with spring

For inset application use hinges for twin appli-cation and a 9 mm spaced mounting plate

Knock-in boss

Steel boss 91A6580

MZM.0040

with spring

40 Knock-in boss

Steel boss 91A6680 ☎

MZM.0040

with spring

40

Accessories – general

Nylon black130°

Opening angle stop

70.6103 ☎

3.5 x3.5 x

15 mm17 mm

Chipboard screws for hinge boss fixing

609.1500 609.1700

Page instructionsSafety information 807Overview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804

- All metal hinge, nickel plated- 170° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)

Catalogue 2011

Safety informationIf young children have access to furniture with wide angle hinges then the 155° opening 0-protrusion hinges should be used.

Safety informationWhen using MODUL wide angle hinges in wardrobes, please make sure that the ward-robe is deep enough (min. 600 mm) so that clothing does not interfere with the hinge link mechanism.

SteelPlainScreen print

Cover caps

80.6507 80.6507.BL

Blum

nickel plated

Accessories

SteelPlainScreen print

Cover caps

80.6507 80.6507.BL

Blum

nickel plated

Accessories

MO

DUL

Page 8: blum modul

max 65

69

118F

3-8

max 7569

1.5 F17.5

3-8

7.5

max 84

69

3-8

26.5 F

min 11

3-8

35 9.5

45

8

min 11

3-8

35

47

57 2.2

275

MODUL – hinge systemMODUL – hinges ▶

Standard application ▶▶

170°-hingePlanning

Overlay application Dual application Inset application

Drilling distance

Mounting plate

Front overlay5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

0 3 4 5 6 7 8

3 3 4 5 6 7 8

9 3 4 5 6 7 8

-

Mounting plate

Front overlay-4.5-3.5-2.5 -1.5-0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5

0 3 4 5 6 7 8

3 3 4 5 6 7 8

9 3 4 5 6 7 8

-

Mounting plate

Front overlay -4.5 -3.5 -2.5 -1.5 -0.5

0

3

9 3 4 5 6 7

-

Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingFor doors up to 21 mm thick no gap is required.For doors in excess of 22 mm thick a trial is recommended.

Adjustment

max. ± 3.0 mm

+

-± 2.0 mm ± 2.0 mm+

- -+

See mounting plates

Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.

Screw-on Knock-in Hinge boss dimensions

MO

DUL

Catalogue 2011

Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 or 9 mm)Hinge and door protrusion at 90° opening angle

F Gap Set mounting plate back by door thickness

Page 9: blum modul

276

MODUL – hinge systemMODUL – hinges▶Profile door application▶▶

Profile/thick door hinge

Order informationOverlay application Dual application Inset application

Screw-on boss

Steel bossPart no.

91M9550 with spring

Screw-on boss

Steel bossPart no.

91M9650 with spring

Screw-on boss

Steel bossPart no.

91M9750 with spring

Accessories – general

3.5 x3.5 x

15 mm17 mm

Chipboard screws for hinge boss fixing

609.1500 609.1700

Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804

- Hinge for thick doors and doors with pro-file

- All metal hinge, nickel plated- 95° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)

Catalogue 2011

SteelPlainStamped

Cover caps

90M2503 90M2503.BP

Blum

nickel plated

Accessories

SteelPlain

Cover caps

94M3603 nickel plated

Accessories

SteelPlain

Cover caps

94M3603 nickel plated

Accessories

MO

DUL

Page 10: blum modul

22

58

11

3-7

14.5F

3-7

3158

1.524F

3-7

732.5 F

40

58

min 12

3-7

35

37

57 3.2

277Catalogue 2011

Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)Hinge and door protrusion at full opening angle

F Gap Set mounting plate back by door thickness

MODUL – hinge systemMODUL – hinges ▶

Profile door application ▶▶

Profile/thick door hingePlanning

Overlay application Dual application Inset application

Drilling distance

Mounting plate

Front overlay5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

0 3 4 5 6 7

3 3 4 5 6 7

9 3 4 5 6 7

-

Mounting plate

Front overlay-4.5-3.5-2.5 -1.5-0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5

0 3 4 5 6 7

3 3 4 5 6 7

9 3 4 5 6 7

-

Mounting plate

Front overlay -4 -3 -2 -1 0

0 3 4 5 6 7

3

9

-

Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingThickness of door

16 18 19 20 22 24 26 28 29 30 31 323 0.2 0.3 0.4 0.5 0.8 1.0 1.5 1.9 2.8 3.6 4.5 5.44 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.8 2.5 3.1 4.0 4.85 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.8 2.3 2.7 3.5 4.36 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.8 2.2 2.5 3.2 3.87 0.2 0.3 0.4 0.5 0.7 0.9 1.4 1.7 2.1 2.4 3.0 3.5

Drilli

ng d

is-ta

nce

Additional for + 2 mm side adjustment+ 0.1 + 0.2 + 0.2 + 0.2 + 0.3 + 0.4 + 0.4 + 0.5 + 0.4 + 0.4 + 0.4 + 0.3

Adjustment

max. ± 3.0 mm

+

-± 2.0 mm ± 2.0 mm+

- -+

See mounting plates

Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.

Screw-on Hinge boss dimensions

MO

DUL

Page 11: blum modul

278

MODUL – hinge systemMODUL – hinges▶Blind corner applications▶▶

Blind corner hinge inset application

Order informationInset application

Screw-on boss

Steel bossPart no.

99M9550 with spring

Knock-in boss

Steel boss 99M9580

MZM.0040

with spring

40

Accessories – general

nickel platedZincSpacing 3 mm

Mounting plate

199.8130 Part no.

3.5 x3.5 x

15 mm17 mm

Chipboard screws for hinge boss fixing

609.1500 609.1700

Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804

- All metal hinge, nickel plated- 95° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)

Catalogue 2011

SteelPlainStamped

Cover caps

90M2503 90M2503.BP

Blum

nickel plated

Accessories

MO

DUL

Page 12: blum modul

min 28

23

33

min 69

14

3-7

8F

min 12

3-7

35 9.5

45

8

min 12

3-7

35

37

57 3.2

279Catalogue 2011

Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 3 mm)Hinge and door protrusion at full opening angle

Fixing position from inside edge of muntin: 14 mmSpecial mounting plate for blind corner application: 199.8130

F Gap

MODUL – hinge systemMODUL – hinges ▶

Blind corner applications ▶▶

Blind corner hinge inset applicationPlanning

Inset application

Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingThickness of door

16 18 19 20 22 24 26 28 29 30 31 323 0.2 0.3 0.4 0.5 0.8 1.0 1.5 1.94 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.85 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.86 0.2 0.3 0.4 0.5 0.7 1.0 1.4 1.87 0.2 0.3 0.4 0.5 0.7 0.9 1.4 1.7

Drilli

ng d

is-ta

nce In these cases a trial is

recommended

Adjustment

max. ± 3.0 mm

+

-± 2.0 mm ± 0.8 mm+

- -+

See mounting plates

Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.

Screw-on Knock-in Hinge boss dimensions

MO

DUL

Page 13: blum modul

1

280

MODUL – hinge systemMODUL – hinges▶Refrigerator application▶▶

Refrigerator/appliance hinge

Order informationOverlay application

Screw-on boss

Zinc bossPart no.

91M0500.21 with spring

Knock-in boss

Zinc boss 91M0530.21

MZM.0040

with spring

40

Accessories – general

3.5 x3.5 x

15 mm17 mm

Chipboard screws for hinge boss fixing

609.1500 609.1700

Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804

- Hinge for refrigerator or appliance doors- Shallow hinge arm height- All metal hinge, nickel plated- 94° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)

Catalogue 2011

SteelPlainStamped

Cover caps

90M2503 90M2503.BP

Blum

nickel plated

Accessories

MO

DUL

Page 14: blum modul

3-5

57

5 10.5

16

F

min 12.5

3-5

359.5

45

9.5

45

8

min 12,5

3-5

35

37

57 2.5

281Catalogue 2011

Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)Hinge and door protrusion at full opening angle

F Gap

MODUL – hinge systemMODUL – hinges ▶

Refrigerator application ▶▶

Refrigerator/appliance hingePlanning

Overlay application

Drilling distance

Mounting plate

Front overlay4.5 5.5 6.5 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5

0 3 4 5

3 3 4 5

9 3 4 5

-

Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory settingThickness of door

16 18 19 20 22 23 24 26 28 30 31 323 1.1 2.2 3.0 3.8 5.54 1.1 2.0 2.7 3.5 5.05 1.1 1.8 2.4 3.0 4.6--

Drilli

ng d

is-ta

nce

In these cases a trial is recommended

Adjustment

max. ± 3.0 mm

+

-+ 0.0 mm ± 2.0 mm- 4.0 mm

+- -

+

See mounting plates

Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.

Screw-on Knock-in Hinge boss dimensions

MO

DUL

Page 15: blum modul

282

MODUL – hinge systemMODUL – hinges▶Angled application – standard▶▶

+45° angled hinge

Overview – MODUL – angled applica-tions

283

283

-

-

45°

271

Order informationScrew-on boss

Steel bossPart no.

99M1550 with spring

SteelPlainStamped

Cover caps

90M2503 90M2503.BP

Blum

nickel plated

Accessories

Accessories – general

3.5 x3.5 x

15 mm17 mm

Chipboard screws for hinge boss fixing

609.1500 609.1700

Page instructionsOverview – MODUL – hinges 269Accessories – mounting plates 284Accessories – cover caps 287Accessories – general 288Assembly, removal and adjustment 290Overview – assembly devices 705More technical details 804

Planning

Corner cabinet

MO

DUL

- For corner cabinets with flush fronts- All metal hinge, nickel plated- +45° angled hinge- 107° opening angle- With closing mechanism (spring)- Slide on hinge arm- 3-dimensional adjustment (with relevant mounting plate)

Catalogue 2011

LW Internal widthTB Door width

Important:These dimensions are based on a 19 mm thick door and cabinet. Dimensions would need to be altered if thickness varied from 19 mm. In these cases a trial is recommended. Some applications require the mounting plate to be moved from the standard fixing positions.

Page 16: blum modul

16.6

33.5

42

61

5

5.513.6

30.5

45.564

.5

45

2.5

283

MODUL – hinge systemMODUL – hinges ▶

Angled application – standard ▶▶

+45° angled hingePlanning

45° 45°

Use 3 mm spaced mounting plate Use 0 mm spaced mounting plate

Info boxWe recommend cabinet planning with the colli-sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD.

Adjustment

max. ± 3.0 mm

+

-± 1.8 mm ± 2.0 mm+

- -+

See mounting plates

Screw-on Knock-in Hinge boss dimensions

MO

DUL

Catalogue 2011

Page 17: blum modul

58

53

62.5

44

32

*

*

H

37

32

*

*

H

37

284

MODUL – hinge systemMODUL – hinges▶Accessories▶▶

Overview – mounting plates

Knock-in dowelEXPANDOSystem screwsChipboard screws

Height adjustment

286± 2 mmwith

285285286

286± 3 mm± 2 mm

± 2 mm284284

Elongated holeElongated holeScrews (two-part)

PictographItem Available Upon Request

Accessories

General Information

Horizontal mounting plate

Cruciform mounting plate

Chipboard screw fixing

System screw fixing

Knock-in dowel fixing

Knock-in dowel fixing – assembly only with the insertion ram

Cruciform mounting plate 37/32

Spacing Height0 mm3 mm

8.3 mm11.3 mm

193L6100 193L6130

Part no.

Cruciform mounting plate 37/32

Spacing Height0 mm3 mm9 mm

9.2 mm12.2 mm18.2 mm

195H7100 195H7130 195H7190

Part no.

MO

DUL

Catalogue 2011

- Material: zinc die-cast, nickel plated

- Fixing with chipboard screws Ø 3.5 and Ø 4 mm

- With height adjustment ± 2 mm

- Recommended screw length 17 mm

- Material: steel, nickel plated- Fixing with chipboard screws Ø 3.5 and Ø 4 mm

- With height adjustment ± 3 mm

- Recommended screw length 17 mm

H Height

* Fix with ad-ditional screw if used with wide angle hinges

H Height

* Fix with ad-ditional screw if used with wide angle hinges

Page 18: blum modul

58

53

58

53

28

50

62.5

44

32

5

*

* min 11.5

H

37

32

5

*

*

min 8.5

H

37

14

32 5

min 11.5

H

37

32

5

*

*

min 11.5

H

285

MODUL – hinge systemMODUL – hinges ▶

Accessories ▶▶

Cruciform mounting plate 37/32

Spacing Height0 mm3 mm

8.3 mm11.3 mm

193L8100 193L8130

Part no.

Cruciform mounting plate for twin application 37/32

Spacing Height0 mm 8.3 mm 193L8100.21

Part no.

Cruciform mounting plate for blind corner applications 14/32

Spacing Height3 mm 12.2 mm 199.8130

Part no.

Cruciform mounting plate 37/32

Spacing Height0 mm 9.2 mm 195H9100

Part no.

MO

DUL

Catalogue 2011

- Material: zinc die-cast, nickel plated

- Fixing with system screws Ø 6 x 14.5 mm (661.1450)

- With height adjustment ± 2 mm

- Material: zinc die-cast, nickel plated

- Fixing with pre-mounted system screws Ø 6 mm

- With height adjustment ± 2 mm

- For blind corner applica-tions

- Material: steel, nickel plated- Fixing with pre-mounted system screws Ø 6 mm

- With height adjustment ± 3 mm

- Material: steel, nickel plated- Fixing with pre-mounted system screws Ø 6 mm

- With height adjustment ± 3 mm

- For twin application

H Height

* Fix with ad-ditional screw if used with wide angle hinges

H Height

* Fix with ad-ditional screw if used with wide angle hinges

H Height

* Additional screw required as standard

H Height

Page 19: blum modul

58

53

58

53

57.5

19

28

32

5

*

min 11.5

H

32

5

*

*

min 11.5

H

37

2032

10

min 11.5

H

286

MODUL – hinge systemMODUL – hinges▶Accessories▶▶

Cruciform mounting plate 28/32

Spacing Height0 mm 8.3 mm 193L8300.22

Part no.

Cruciform mounting plate 37/32

Spacing Height0 mm3 mm

8.3 mm11.3 mm

194E6100.ED194E6130.ED

Part no.

Horizontal mounting plate 20/32

Spacing Height0 mm

Assembly with insertion ram onlyMZM.0050

9.2 mm 197M6100 Part no.

50

MO

DUL

Catalogue 2011

- Material: steel, nickel plated- Fixing with pre-mounted system screws Ø 6 mm

- With height adjustment ± 3 mm

- Material: steel, nickel plated- Fixing with pre-mounted special screws with split dowels (EXPANDO)

- With height adjustment ± 2 mm

- Material: zinc die-cast, nickel plated

- Knock-in assembly with pre-fixed dowels

- With height adjustment ± 2 mm

H Height

* Fix with ad-ditional screw if used with wide angle hinges

H Height

* Fix with ad-ditional screw if used with wide angle hinges

H Height

Page 20: blum modul

287

MODUL – hinge systemMODUL – hinges ▶

Accessories ▶▶

Cover capsCranked hinge armStraight hinge armDouble cranked arm

Hinge applications

SteelScreen print

90M2603.BL

SteelStamped

SteelPlain

100°-hinge

90M2603 90M2503.BP 90M2503

SteelPlain

SteelScreen print

80.6507.BL

SteelScreen print

SteelPlain

170°-hinge

80.6507 80.6507.BL 80.6507

SteelPlain

SteelStamped

SteelPlain

Cover caps: can be printed with customer logo – minimums from 1000 pcs

Refrigerator/appliance hinge+45° angled hinge

Blind corner hinge

90M2503.BP 90M2503

Catalogue 2011

SteelStamped

SteelPlain

Profile/thick door hinge

94M3603 90M2503.BP 90M2503

SteelPlain

MO

DUL

Page 21: blum modul

Ø3.5

X

Ø7

Ø6

X

Ø8

288

MODUL – hinge systemMODUL – hinges▶Accessories▶▶

Chipboard screws Ø 3.5 mmLength (X)

609.1500 609.1700

15 mm17 mm

Part no.

System screws Ø 6.0 mmLength (X)

661.1000.HG661.1150.HG661.1300.HG661.1450.HG661.2000.HG

10 mm11.5 mm13 mm14.5 mm20 mm

Part no.

Centre bit

M01.ZZ03 M01.ZZB3

Part no.

Centre bitDrill bit

Stick-on door buffer

993.710 Part no.

naturalNylon

8 mm Ø door buffer

993.706 Part no.

RAL 9006 white aluminiumNylon

MO

DUL

Catalogue 2011

- Nickel plated- Ø 3.5 mm

- Hardened- Ø 2.7 mm, length 70 mm- To pre-drill for Ø 3.5 mm chipboard screws- Drilling depth up to 8 mm

- For noise reduction

- For noise reduction- Gap 2 mm- Two-part

- Nickel plated- Ø 6 mm- Drilling diameter 5 mm

Page 22: blum modul

289Catalogue 2011

- PZ (Pozi) size 2- Blade length 100 mm- Overall length 200 mm- Orange handle with Blum logo

- Slotted, size 1.0 x 5.5 mm- Blade length 125 mm- Overall length 225 mm- Orange handle with Blum logo

MODUL – hinge systemMODUL – hinges ▶

Accessories ▶▶

Pozidrive screwdriver

303.756.1Part no.

orangeNylon/steel

Slotted screwdriver

314.928.1Part no.

orangeNylon/steel

MO

DUL

Page 23: blum modul

290

MODUL – hinge systemMODUL – hinges▶Assembly, removal and adjustment▶▶

MODUL

Adjustment

MO

DUL

Assembly Removal

Height adjustment Side adjustment Depth adjustment

Catalogue 2011

Page 24: blum modul

291

MODUL – hinge system

MO

DUL

Catalogue 2011