Blue Max 2000 Vector Duty - SIECA

Prices and Specifications are subject to change without notice.®

25

Applications: Blue Max® motors are used in variable frequency drive applications requiring full rated torqueat zero speed, utilizing Closed- or Open-Loop (Sensorless) Vector controls, or up to a 20:1constant torque range, utilizing Volts/Hertz drives. The cast iron construction makes this motoran ideal choice for process lines, chemical plants, paper mills or any other environmentrequiring cast iron or "severe duty" construction.

Features: • MAX GUARD® Insulation System• Constant torque operation from 0 to base RPM (2000:1) on Vector Drives• Constant torque operation from 1/20 speed to base RPM (20:1) on Volts/Hertz • Constant horsepower operation up to twice base speed (design-dependent)• Continuous duty at 40º C ambient• Cast Iron construction• Optimized design for operation with IGBT inverter• Stock TENV and TEBC models C-Face through 100 HP• Stock TEBC models designed for "B" temperature rise (generous thermal capacity)• Encoder provisions included on all stock models• UL Recognized under File #E49747• CSA Certified under File #LR2025• Explosion Proof models UL Listed under File #E12044• Explosion Proof models CSA Certified under File #LR47504 and LR21839• Three year warranty on motor and most installed accessories

Stock Ratings: • TEFC ratings from 213TC-445T• TENV ratings from 143TC-256TC• TEBC ratings from 284TC-449T• Models through 20 HP are C-Face with Rigid Base (all enclosures)• TEBC models 25-100 HP are C-Face with Rigid Base• Explosion Proof 1-20 HP, with 1024 ppr explosion proof encoder (page 37)• 1-20 HP Brakemotors, with 140% rated NEMA 2 brakes (page 40)• 230/460 Volt through 100 HP, 460 Volt 125-350 HP. Other voltages available.

Modified • Dripproof Force Ventilated (DPFV): 364T-5013, 800 HPCapabilities: • Totally Enclosed Non-Ventilated (TENV), continuous or 60 minute duty: 143T-5013

• Totally Enclosed Fan-Cooled (TEFC): 182T-5013• Totally Enclosed Blower Cooled (TEBC): 213T-5013• Explosion Proof Non-Ventilated (EPNV): 143T-449T• Explosion Proof Fan-Cooled (EPFC): 143T-449T• 575 volt and any other base frequency/voltage available on a "build-up" basis

Encoders: • Avtron "M3", 1024 ppr with EPIC connector and mating connector (TEFC)• Avtron "M56"/”M85”, 1024 ppr with Epic connector & mating connector (TENV & TEBC)• BEI "HS35", 1024 and 2048 ppr with 10 pin connector & mating connector• Dynapar "HS35", 1024 and 2048 ppr with 10 pin connector & mating connector• NorthStar SL56, 1024 ppr with EPIC connector & mating connector (TENV & TEBC)• NorthStar "MagCoder", 1024 ppr with EPIC connector & mating connector• Cable kits for HS35 and SL56 encoders available

Brakes: • Stearns NEMA 2 in 6 lb-ft and 10 lb-ft sizes• Brakemotor with encoder available through MOD Central, utilizing A786 encoder kit

Drives (TEFC)

Blue Max® 2000 Vector Duty2000:1 Constant Torque Motors

26 Prices and Specifications are subject to change without notice.®

1 1800 230/460 TENV 143TC TSTAT Y525✯ 143THTN8028 $720 E3 3.0/1.5 61 13.68 B1 1/2 1800 230/460 TENV 145TC TSTAT Y590✯ 145THTN8037 $724 E3 4.6/2.3 63 14.68

2 1800 230/460 TENV 145TC TSTAT Y526✯ 145THTN8029 $780 E3 6.0/3.0 70 14.68 3 1800 230/460 TENV 182TC TSTAT Y527✯ 182THTS8028 $980 E3 8.0/4.0 110 16.68 5 1800 230/460 TENV 184TC TSTAT Y564✯ 184THTS8028 $1,095 E3 13.4/6.7 117 17.68 B

7 1/2 1800 230/460 TEFC 213TC TSTAT Y595✯ 213THFS8028 $1,281 E3 19.4/9.7 183 21.03 1800 230/460 TENV 213TC TSTAT Y565✯ 213THTS8038 $1,475 E3 21.0/10.5 180 20.56

10 1800 230/460 TEFC 215TC TSTAT Y596✯ 215THFS8029 $1,531 E3 25.4/12.7 211 22.53 1800 230/460 TENV 215TC TSTAT Y566✯ 215THTS8038 $1,750 E3 26.0/13.0 290 22.74

15 1800 230/460 TEFC 254TC TSTAT Y597✯ 254THFNA8038 $1,844 E3 37.0/18.5 339 26.34 1800 230/460 TENV 254TC TSTAT Y509✯ 254THTNA8058 $2,095 E3 38.0/19.0 350 23.38 1200 230/460 TEBC 284TC TSTAT Y395✯ 284THFPA8086 $3,816 E3 40.0/20.0 480 37.48 94

20 1800 230/460 TEFC 256TC TSTAT Y598✯ 256THFNA8038 $2,040 E3 52.0/26.0 375 28.09 1800 230/460 TENV 256TC TSTAT Y510✯ 256THTNA8038 $2,900 E3 52.0/26.0 380 27.13 1200 230/460 TEBC 286TC TSTAT Y582✯ 286THFPA8086 $5,313 E3 52.4/26.2 500 38.98 B,94

25 1800 230/460 TEFC 284T TSTAT Y569✯ 284THFPA8028 $2,548 E3 63.0/31.5 493 28.58 1800 230/460 TEBC 284TC TSTAT Y511✯ 284THFPA8038 $3,561 E3 63.0/31.5 500 37.48 941200 230/460 TEBC 324TC TSTAT Y583✯ 324THFPA8086 $6,250 E3 67.0/33.5 620 40.41 B,94

30 1800 230/460 TEFC 286T TSTAT Y570✯ 286THFNA8028 $2,913 E3 77.0/38.5 594 29.91 1800 230/460 TEBC 286TC TSTAT Y512✯ 286THFPA8038 $3,926 E3 74.0/37.0 520 38.98 941200 230/460 TEBC 326TC TSTAT Y584✯ 326THFPA8086 $6,875 E3 82.0/41.0 750 41.91 B,94

40 1800 230/460 TEFC 324T TSTAT Y571✯ 324THFPA8028 $3,772 E3 100/50.0 545 30.71 1800 230/460 TEBC 324TC TSTAT Y513✯ 324THFPA8038 $4,703 E3 100/50.0 700 40.41 941200 230/460 TEBC 364TC TSTAT Y585✯ 364THFS8391 $8,294 E3 104/52.0 1011 42.78 94

50 1800 230/460 TEFC 326T TSTAT Y572✯ 326THFS8028 $4,666 E3 121/60.5 640 32.44 1800 230/460 TEBC 326TC TSTAT Y514✯ 326THFPA8038 $5,391 E3 120/60.0 750 41.91 941200 230/460 TEBC 365TC TSTAT Y586✯ 365THFS8380 $9,942 E3 124/64.5 1081 43.78 94

60 1800 230/460 TEFC 364T TSTAT Y573✯ 364THFS8036 $6,014 E3 147/73.5 965 33.70 1800 230/460 TEBC 364TC TSTAT Y515✯ 364THFS8046 $6,600 E3 147/74.0 1062 42.67 941200 230/460 TEBC 404TC TSTAT Y587✯ 404THFS8092 $11,029 E3 142/71.0 1339 48.22 94

Blue Max® 2000 Vector Duty2000:1 Constant TorqueTotally Enclosed Rigid Base, and C-Face with Rigid Base

Applications: Designed for inverter or vector applications where up to a 2000:1 constant torquespeed range is required. Typical uses include: material handling, machine tools,conveyors, crane and hoist, metal processing, test stands, pumps, compressors, textileprocessing, and other industrial machinery installed in dusty or dirty environ-ments where cast iron construction is required.

Features: • MAX GUARD® Class H insulation system• Constant torque operation from 0 to base speed on vector drive, including TEFC

(On Volts/Hertz drives, TEFC motors are limited to 20:1 Constant torque)• Constant HP operation to twice base speed (143-254 frame); 1.5 time base (all others)• Continuous duty at 40º C ambient• Optimized for operation with IGBT inverter (NEMA Design A)• C-Face with rigid base through 100 HP as noted• Class F normally closed thermostats• Ball bearing (roller bearing available 360 Frame & larger)• Shaft Ground brush on DE for bearing protection on 444T Frame and larger• Cast iron frame and brackets• Patented “fracket” design (TEBC enclosure) • "B" temperature rise on Blower-Cooled motors• F1 standard, field reversible to F2• Encoder provisions included on opposite drive end (see Modification and/or Accessory

Kits sections)• UL Recognized and CSA Certified (contact factory for CE marking)• Three year warranty

Footnotes:B NEMA Design B 94 Separate power supply required for blower motor

OVER CAT. MODEL LIST MULT. F.L. WGHT. "C" FOOTHP RPM VOLTS ENCL. FRAME LOAD NO. NO. PRICE SYMB. AMPS LBS. DIM. NOTES

Blue shaded areas are cast iron frames.Contact Marathon Electric for other base speeds and options not shown in this catalog.

See performance and dimensions pages 29-32

✯ Stock Model

Continued on next page


27

Blue Max® 2000 Vector Duty2000:1 Constant Torque

Totally Enclosed Rigid Base, and C-Face with Rigid Base

Footnotes:B NEMA Design BCT Suitable for 20:1 CT on Vector Drive,

continuous duty or 2000:1 CT, 60 minute duty94 Separate power supply required for blower motor

Blue shaded areas are cast iron frames.Contact Marathon Electric for other base speeds and options not shown in this catalog.

75 1800 230/460 TEFC 365T TSTAT Y574✯ 365THFS8036 $6,813 E3 184/92.0 1006 34.70 1800 230/460 TEBC 365TC TSTAT Y516✯ 365THFS8046 $7,890 E3 180/90.0 1106 43.67 941200 230/460 TEBC 405TC TSTAT Y588✯ 405THFS8378 $13,438 E3 180/90.0 1350 49.72 d,B,94

100 1800 230/460 TEFC 405T TSTAT Y575✯ 405THFS8036 $9,219 E3 230/115 1308 39.32 1800 230/460 TEBC 405TC TSTAT Y517✯ 405THFS8046 $11,014 E3 230/115 1429 49.72 941200 230/460 TEBC 444TC TSTAT Y589✯ 444THFN8384 $15,279 E3 250/125 2150 52.72 94

125 1800 460 TEFC 444T TSTAT Y576✯ 444THFN8036 $11,988 E3 143 2062 43.38 1800 460 TEBC 444T TSTAT Y518✯ 444THFN8046 $13,890 E3 138 2110 52.72 B,94

150 1800 460 TEFC 445T TSTAT Y577✯ 445THFN8036 $13,863 E3 170 2246 45.38 1800 460 TEBC 445T TSTAT Y519✯ 445THFN8046 $15,765 E3 170 2321 54.72 94

200 1800 460 TEFC 445T TSTAT Y578✯ 445THFN8040 $16,764 E3 230 2404 45.38 1800 460 TEBC 445T TSTAT Y520✯ 445THFN8050 $18,666 E3 230 2457 54.72 94

250 1800 460 TEFC 449T TSTAT Y579 449THFS8036 $20,917 E3 295 2800 53.89 1800 460 TEBC 449T TSTAT Y531✯ 449THFS8046 $23,417 E3 295 2880 63.21 94

300 1800 460 TEFC 449T TSTAT Y580 449THFS8037 $23,837 E3 330 2890 53.89 CT1800 460 TEBC 449T TSTAT Y532✯ 449THFS8047 $26,337 E3 327 2950 63.21 94

350 1800 460 TEBC 449T TSTAT Y533✯ 449THFS8048 $28,837 E3 385 3075 63.21 94

OVER CAT. MODEL LIST MULT. F.L. WGHT. "C" FOOTHP RPM VOLTS ENCL. FRAME LOAD NO. NO. PRICE SYMB. AMPS LBS. DIM. NOTES

See performance and dimensions pages 29-32

✯ Stock Model

Blue Max® 2000 Vector Duty

Avtron M3 1024 N/A (Part #B-91620-4) $1,743 E3 Shaft Mount, 5-26 VDC, with EPIC connector/mateNorthStar SL56 1024 A763✯ KIT LKSR02 $1,435 E3 Modular mount, 5-15 VDC, with EPIC connector/mateNorthStar SL56 1024 A786✯ KIT LKSR-CFACE $1,589 E3 Double C-Face encoder for use with brakeNorthStar SL56 2048 N/A (Part #B-90876-66) $1,435 E3 Modular mount, 5-15 VDC, with EPIC connector/mate

TENV 143-256 NorthStar Magcoder 1024 N/A (Part #B-91363-1) $1,025 E3 Shaft Mount, 5-15 VDC, with EPIC connector/mateDynapar HS35 1024 A772✯ KIT HS351024-NV $923 E3 Shaft Mount, 5-26 VDC, with 10 pin connector/mate

BEI HS35 1024 A779✯ KIT HS35B1024-NV $923 E3 Shaft Mount, 5-26 VDC, with 10 pin connector/mateDynapar HS35 2048 A776✯ KIT HS352048-NV $923 E3 Shaft Mount, 5-26 VDC, with 10 pin connector/mate

BEI HS35 2048 A780✯ KIT HS35B2048-NV $923 E3 Shaft Mount, 5-26 VDC, with 10 pin connector/mateAvtron M3 1024 N/A (Part #B-91620-6) $1,743 E3 Shaft mount, 5-24VDC, with EPIC connector/mate

NorthStar MagCoder 1024 N/A (Part #B-91363-2) $1,025 E3 Shaft Mount, 5-15 VDC, with EPIC connector/mate

TEFC 213-449 Dynapar HS35 1024 A774✯ KIT HS351024-FC $923 E3 Shaft Mount, 5-26 VDC, with 10 pin connector/mateBEI HS35 1024 A783✯ KIT HS35B1024-FC $923 E3 Shaft Mount, 5-26 VDC, with 10 pin connector/mate

Dynapar HS35 2048 A777✯ KIT HS352048-FC $923 E3 Shaft Mount, 5-26 VDC, with 10 pin connector/mateBEI HS35 2048 A784✯ KIT HS35B2048-FC $923 E3 Shaft Mount, 5-26 VDC, with 10 pin connector/mate

NorthStar SL56 1024 A764✯ KIT LKSR03 $1,435 E3 Modular mount, 5-15 VDC, requires A801Dynapar HS35 1024 A775✯ KIT HS351024-BC $923 E3 Shaft Mount, 5-26 VDC, includes A801

TEBC 284-449 BEI HS35 1024 A781✯ KIT HS35B1024-BC $923 E3 Shaft Mount, 5-26 VDC, includes A801Dynapar HS35 2048 A778✯ KIT HS352048-BC $923 E3 Shaft Mount, 5-26 VDC, includes A801

BEI HS35 2048 A782✯ KIT HS35B2048-BC $923 E3 Shaft Mount, 5-26 VDC, includes A801--------------- N/A A801✯ KIT ENCBOX $0 E3 Encoder Conduit Box ($80 List, loose)

NEMA BRAND / CAT. LIST PRICE MULT.ENCL. FRAME MODEL PPR NO. KIT NO. INSTALLED SYMB. NOTES

Encoders Through Mod Central

✯ Stock Model


Blue Max® 2000 Vector Duty

Brakes Through Mod CentralStearns 56000-Series, NEMA 2 Spring-Set Disc Type

6 A312✯ 230/460 KIT BM6BRK $460 E310 A313✯ 230/460 KIT BM10BRK $559 E36 A315✯ 575 KIT BM6BRK575 $460 E310 A316✯ 575 KIT BM10BRK575 $559 E36 A317✯ 115/208-230 KIT BM6BRK115 $460 E310 A318✯ 115/208-230 KIT BM10BRK115 $559 E3

TORQUE CAT. COIL LIST PRICE MULT.(LB-FT) NO. VOLTAGE KIT NO. INSTALLED SYMB.

✯ Stock Model

✯ Stock Model

See Brakemotor section for larger brakemotor ratings.

Cable Kits For Encoders

A688-10✯ 10 $180 E3A688-20 20 $252 E3A688-25 25 $288 E3A688-30 30 $324 E3

Fits HS35 Encoders - A688-40 40 $396 E3Encoder cable is prewired with A688-45 45 $432 E3

10 pin mating connector A688-50✯ 50 $468 E3A688-55 55 $504 E3A688-60 60 $540 E3A688-70 70 $612 E3A688-75 75 $648 E3A688-100 100 $828 E3

Fits HS35 Encoders - Bulk Cable A689-25 25 $180 E3A690-5 5 $77 E3

Fits Northstar encoders A690-10 10 $113 E3- Bulk Cable A690-15✯ 15 $149 E3

A690-20 20 $185 E3A690-30 30 $257 E3

CAT.CABLE

LIST MULT.DESCRIPTIONSNO.

LENGTHPRICE SYMB.(FT.)


29

1 1756 0 TENV 143TC 1.5 0.85 3.0 14.0 3520 85.5 72.0 8.094 5.481 11.644 10.366 301.040 0.1001 1/2 1750 0 TENV 145TC 2.3 1.5 4.5 24.0 3500 82.5 72.0 6.294 4.498 7.277 7.088 185.409 0.100

2 1750 0 TENV 145TC 3.0 1.7 6.0 28.5 3525 85.5 78.0 3.834 2.897 5.949 5.637 154.780 0.1303 1760 0 TENV 182TC 4.0 2.0 9.0 35.0 3525 90.2 80.0 2.353 1.616 5.084 7.900 130.410 0.4005 1750 0 TENV 184TC 6.7 3.5 15.0 61.0 3490 88.5 79.0 1.690 1.168 3.255 4.791 77.679 0.450

7 1/2 1765 0 TEFC 213TC 9.7 4.2 22.5 89.0 3525 88.5 81.0 0.786 0.669 2.510 3.893 63.880 0.8001775 0 TENV 213TC 10.5 5.8 22.2 94.0 3540 90.2 75.0 0.575 0.461 1.943 2.986 43.848 1.100

10 1765 0 TEFC 215TC 12.7 5.5 29.8 75.0 2660 90.2 81.0 0.536 0.446 2.031 3.081 48.422 1.1001775 0 TENV 215TC 13.0 6.5 29.5 119.0 3460 91.0 78.0 0.395 0.361 1.477 2.425 36.920 1.400

15 1765 0 TEFC 254TC 18.5 7.0 44.5 108.0 2635 90.2 83.5 0.429 0.306 1.446 1.875 35.154 2.2001772 0 TENV 254TC 20.2 11.8 44.5 180.0 3565 93.0 74.5 0.299 0.236 1.040 1.414 22.548 2.5001170 0 TEBC 284TC 20.0 9.0 67.0 178.0 1765 88.5 79.0 0.496 0.405 1.656 1.516 28.380 2.600

20 1775 0 TEFC 256TC 26.0 14.0 59.0 195.0 2670 91.0 78.0 0.226 0.163 0.811 0.436 19.028 2.6001770 0 TENV 256TC 26.0 14.5 59.5 325.0 3570 93.6 77.0 0.220 0.192 0.675 0.684 18.204 3.5001160 0 TEBC 286TC 26.2 11.0 90.0 215.0 1755 87.5 82.0 0.382 0.339 1.342 1.274 24.850 3.000

25 1765 0 TEFC 284T 31.5 14.0 74.5 195.0 2650 91.7 82.0 0.227 0.178 0.807 1.100 18.600 2.5001765 0 TEBC 284TC 31.5 14.0 74.5 195.0 2650 91.7 82.0 0.227 0.178 0.807 1.098 18.580 2.6001170 0 TEBC 324TC 33.5 16.5 112.0 280.0 1760 91.7 76.0 0.343 0.219 0.855 0.594 20.634 5.000







125 1788 0 TEFC 444T 143.0 47.0 367.0 1175.0 2682 94.5 87.0 0.024 0.010 0.202 0.128 5.400 43.5001785 0 TEBC 444T 138.0 40.0 367.0 975.0 2675 95.4 88.5 0.031 0.015 0.250 0.170 6.360 40.000

150 1790 0 TEFC 445T 170.0 57.0 440.0 1475.0 2675 94.5 87.5 0.016 0.009 0.154 0.112 4.420 50.5001790 0 TEBC 445T 170.0 57.0 440.0 1475.0 2675 94.5 87.5 0.016 0.010 0.154 0.112 4.420 50.500

200 1790 0 TEFC 445T 230.0 81.0 588.0 2260.0 2675 95.0 86.0 0.013 0.007 0.102 0.079 3.020 60.0001790 0 TEBC 445T 230.0 81.0 588.0 2260.0 2675 95.0 86.0 0.013 0.007 0.102 0.079 3.025 60.000

250 1788 0 TEFC 449T 280.0 85.0 735.0 2500.0 2670 95.0 89.0 0.009 0.006 0.093 0.077 2.998 73.5001790 0 TEBC 449T 295.0 103.0 734.0 2065.0 2685 95.0 84.0 0.008 0.006 0.083 0.108 2.565 76.000

300 1788 0 TEFC 449T 330.0 95.0 880.0 2925.0 2675 95.4 89.5 0.007 0.006 0.077 0.063 2.791 87.5001785 0 TEBC 449T 327.0 85.0 883.0 2475.0 2675 95.4 90.0 0.009 0.007 0.092 0.075 3.087 80.500

350 1784 0 TEBC 449T 385.0 95.0 1030.0 2925.0 2680 95.4 90.0 0.007 0.005 0.076 0.065 2.636 87.500

Performance DataBlue Max® 2000:1 Constant Torque Motors (all data at 460 volt)

F.L. N.L. F.L. B.D. MAX F.L. ROTORF.L. MIN. NEMA AMPS AMPS TORQUE TORQUE CHP F.L. POWER INERTIA

HP RPM RPM ENCL FRAME 460 V 460 V (LB-FT) (LB-FT) RPM* EFFIC FACTOR R1 R2 X1 X2 XM (LB-FT2)

Ohms/Ph - Equivalent Wye Circuit (460 Vac)(at rated operating temp. in a 40°C ambient)

Performance data based on sine wave tests.Performance curves available - Contact Marathon Electric

* Maximum Constant HP RPM is for direct coupled loads.

TEFC models are suitable for CT operation on Volts/Hertzdrives from1/20 base speed to base speed, or 2000:1 CT operation on vector drives (60 minute duty > 20:1 CT)

R1 = Stator ResistanceR2 = Rotor ResistanceX1 = Stator ReactanceX2 = Rotor ReactanceXM = Magnetizing Reactance


O P AB AGFRAME D E 2F H MAX. MAX. U AA MAX. MAX. AH AJ AK BA BB BF BS KEY

143TC 3.50 2.75 4.00 .38 7.45 7.98 .875 1.09 7.04 9.25 2.12 5.875 4.500 2.62 .13 3/8-16 2.81 .19x.19x1.38145TC 3.50 2.75 5.00 .35 7.45 7.98 .875 1.09 7.04 10.25 2.12 5.875 4.500 2.62 .13 3/8-16 3.81 .19x.19x1.38182TC 4.50 3.75 4.50 .41 9.36 9.76 1.125 1.09 8.08 11.75 2.62 7.250 8.500 3.50 .27 1/2-13 2.25 .25x.25x1.75184TC 4.50 3.75 5.50 .41 9.36 9.76 1.125 1.09 8.08 12.75 2.62 7.250 8.500 3.50 .27 1/2-13 2.75 .25x.25x1.75213TC 5.25 4.25 5.50 .44 10.97 11.50 1.375 1.09 9.31 15.12 3.12 7.250 8.500 4.25 .27 1/2-13 3.50 .31x.31x2.38215TC 5.25 4.25 7.00 .44 10.97 11.50 1.375 1.09 9.31 17.31 3.12 7.250 8.500 4.25 .27 1/2-13 6.18 .31x.31x2.38254TC 6.25 5.00 8.25 .53 14.09 14.27 1.625 1.25 9.83 19.06 3.75 7.250 8.500 4.75 .27 1/2-13 6.31 .38x.38x2.88256TC 6.25 5.00 10.00 .56 16.49 14.27 1.625 1.25 10.68 21.07 3.75 7.250 8.500 4.75 .27 1/2-13 4.75 .38x.38x2.88

2F

U

KEY

D+.00-.06

O

AB

P

HOLE FOR'AA' CONDUIT

'H' DIA.4 HOLES

E

AK

AH

BBAJ

'BF' DIA.4 HOLES

AG

BA

Ø 4.5004.497

Ø .6250.6245

(C )

.19x.09x1.62 KEYWAY

1.75

BS

SL56 TACH.ADD .50 TO'C' DIM.

HS35 TACH.ADD 1.00TO 'C' DIM.

(C ) (C )

*

Ø5.875

3/8-16UNC-2B4 HOLES

*Removable cover

DimensionsBlue Max® 2000 Vector DutyTotally Enclosed Non-Ventilated (TENV), C-Face with Rigid Base

All dimensions are measured in inches. For “C” dimensions, refer to the appropriate catalog page. Certifieddrawings are available upon request - contact Marathon Electric for details.


31

HS35 TACHADD 1.25TO 'C' DIM.

(C )

BS2F

N-W

KEY

BA

U

AB

AC

(C )

E'H' DIA.4 HOLES

D+.00-.06

1.75

AALEAD HOLE

1.0000.9995

P

O

FRAME D E 2F H O P U AA AB AC BA BS N-W KEY(MAX) (MAX) (MAX) (MAX)


*Removable cover

Flange dimensions specific to C-Face rigid base motors on inside back cover

DimensionsBlue Max® 2000 Vector Duty

Totally Enclosed Fan-Cooled (TEFC), Rigid Base

213T 5.25 4.25 5.50 .44 11.30 11.50 1.38 1.09 9.31 7.69 4.25 2.75 3.38 .31x.31x2.38215T 5.25 4.25 7.00 .44 11.30 11.50 1.38 1.09 9.31 7.69 4.25 3.50 3.38 .31x.31x2.38254T 6.25 5.00 8.25 .53 14.09 14.30 1.62 1.25 10.96 9.32 4.25 4.12 4.00 .38x.38x2.88256T 6.25 5.00 10.00 .53 14.09 14.30 1.62 1.25 10.96 9.32 4.25 5.00 4.00 .38x.38x2.88284T 7.00 5.50 9.50 .53 14.90 15.88 1.88 1.50 12.31 9.31 4.75 4.75 4.62 .50x.50x3.25

284TS 7.00 5.50 9.50 .53 14.90 15.88 1.62 1.50 12.31 9.31 4.75 4.75 3.25 .38x.38x1.88286T 7.00 5.50 11.00 .53 14.90 15.88 1.88 1.50 12.31 9.31 4.75 5.50 4.62 .50x.50x3.25

286TS 7.00 5.50 11.00 .53 14.90 15.88 1.62 1.50 12.31 9.31 4.75 5.50 3.25 .38x.38x1.88324T 8.00 6.25 10.50 .66 16.00 15.88 2.12 2.00 13.69 10.69 5.25 5.25 5.25 .50x.50x3.88

324TS 8.00 6.25 10.50 .66 16.00 15.88 1.88 2.00 13.69 10.69 5.25 5.25 3.75 .50x.50x2.00326T 8.00 6.25 12.00 .66 16.00 15.88 2.12 2.00 13.69 10.69 5.25 6.00 5.25 .50x.50x3.88

326TS 8.00 6.25 12.00 .66 16.00 15.88 1.88 2.00 13.69 10.69 5.25 6.00 3.75 .50x.50x2.00364T 9.00 7.00 11.25 .66 19.00 20.00 2.38 3.62 17.85 14.56 5.88 5.62 5.88 .62x.62x4.25

364TS 9.00 7.00 11.25 .66 19.00 20.00 1.88 3.62 17.85 14.56 5.88 5.62 3.75 .50x.50x2.00365T 9.00 7.00 12.25 .66 19.00 20.00 2.38 3.62 17.85 14.56 5.88 6.12 5.88 .62x.62x4.25

365TS 9.00 7.00 12.25 .66 19.00 20.00 1.88 3.62 17.85 14.56 5.88 6.12 3.75 .50x.50x2.00404T 10.00 8.00 12.25 .81 20.88 21.75 2.88 3.62 18.75 14.75 6.62 6.12 7.25 .75x.75x5.62

404TS 10.00 8.00 12.25 .81 20.88 21.75 2.12 3.62 18.75 14.75 6.62 6.12 4.25 .50x.50x2.75405T 10.00 8.00 13.75 .81 20.88 21.75 2.88 3.62 19.75 16.25 6.62 6.88 7.25 .75x.75x5.62

405TS 10.00 8.00 13.75 .81 20.88 21.75 2.12 3.62 19.75 16.25 6.62 6.88 4.25 .50x.50x2.75444T 11.00 9.00 14.50 .81 24.19 26.31 3.38 3.62 20.94 17.38 7.50 7.25 8.50 .88x.88x6.88

444TS 11.00 9.00 14.50 .81 24.19 26.31 2.38 3.62 20.94 17.38 7.50 7.25 4.75 .62x.62x3.00445T 11.00 9.00 16.50 .81 24.19 26.31 3.38 3.62 20.94 17.38 7.50 8.25 8.50 .88x.88x6.88

445TS 11.00 9.00 16.50 .81 24.19 26.31 2.38 3.62 20.94 17.38 7.50 8.25 4.75 .62x.62x3.00449T 11.00 9.00 25.00 .81 24.22 26.31 3.38 4.62 25.90 19.31 7.50 1.78 8.50 .88x.88x6.88

449TS 11.00 9.00 25.00 .81 24.22 26.31 2.38 4.62 25.90 19.31 7.50 1.78 4.75 .62x.62x3.00

FRAME D E 2F H XO P U AA AB AC AG AH AJ AK BA BB BF BS KEY(MAX) (MAX) (MAX) (MAX) (MAX)

7.50

7.50

7.50

7.50

7.50

7.50

6.62

6.62

6.62

26.31

26.31

26.31

26.31

21.75

27.03

27.03

26.95

26.95

24.06

.81

.81

.81

.81

.81

.81

.81

11.00

11.00

11.00

11.00

10.00

8.00

8.00

9.00

9.00

8.00

9.00

9.00

9.00

9.00 .62x.62x3.004.6225.00449TCS 4.502.38

.88x.88x6.88

.62x.62x3.00

4.62

12.25

449TC

3.62

8.25

4.50

3.38

2.3826.3126.9516.5011.00

25.00

445TCS

.75x.75x5.623.62 7.002.88

445TC

405TC

.88x.88x6.88

.88x.88x6.88

3.62

3.62 8.253.38444TC

.62x.62x3.003.62

8.25

26.95

.50x.50x2.753.62

4.50

4.00

3.38

26.31

24.06

.50x50x2.75

.8114.50

14.50

13.75

13.75

11.00

3.62 4.00

2.38

21.75

.81

10.00 2.12

21.7524.0610.00 2.12

16.50

444TCS

405TCS

404TCS

6.62

5.88

5.88

5.88

5.88

5.25

5.25

5.25

5.25

4.75

4.75

4.75

4.75

4.25

4.25

3.50

3.50 .31x.31x2.383.121.3811.5013.355.25 .445.504.25 1.09213TC

215TC

256TC

284TCS

286TCS

324TCS

326TCS

4.25

5.00

5.50

7.00

11.25

.44

6.25

1.38

1.62

1.62

3.121.09 .31x.31x2.38

10.00 16.31

17.88

14.27

1.62

3.75

.38x.38x1.887.00

7.00

9.50 .53

17.88

5.25

15.88

1.88

3.00

1.25

1.50

.38x.38x2.88

6.25

7.00

7.00

8.00

5.00

.53

14.27

18.25

1.88

3.001.50

8.00

5.50

5.50

8.25

9.50

10.50

10.50

12.00

12.00 .66

.38x.38x1.88

11.00

20.25

18.25

2.38

3.50

3.50

2.00 .50x.50x2.00

.53

.53

.53

20.25

5.62

2.00 .50x.50x2.00

326TC

16.31

17.88

2.12 5.002.00

3.62

.50x.50x3.88

.62x.62x4.25

254TC

324TC

364TC

15.88

15.88

1.62

2.12

3.75

5.00

1.25

2.00 .50x.50x3.88

284TC

286TC

17.88 1.88

1.88

4.381.50

1.50

13.35

364TCS

12.25

9.00 11.25 22.62 20.00 1.88

2.38

3.50

5.62

3.62

365TC

11.00

.53

3.62

.50x.50x2.00

.62x.62x4.25

11.50

15.88 4.38

1.88 3.50365TCS 12.25 3.62 .50x.50x2.00

.75x.75x5.623.6212.25404TC 7.002.88

.38x.38x2.88

.50x.50x3.25

.50x.50x3.25

8.00

7.00

7.00

7.00

6.25

6.25

7.00

6.25

6.25

5.50

8.00

8.00

9.00

9.00

9.00

10.00

.66

.66

.66

.66

.66

.66

.66

.81

20.25

20.25

22.62

22.62

22.62

24.06

18.25

18.25

20.00

20.00

20.00

21.75

2.75

3.50

4.12

5.00

4.75

4.75

5.50

5.50

5.25

5.25

6.00

6.00

5.62

5.62

6.12

6.12

6.12

6.12

6.88

6.88

7.25

7.25

8.25

8.25

1.78

1.78

14.75

14.56

14.56

14.56

9.31

9.31

9.32

10.69

14.56

10.69

10.69

10.69

9.31

9.31

9.32

7.69

7.69

14.75

16.25

17.38

17.38

17.38

16.25

17.38

19.31

19.3125.90

25.90

20.94

18.75

20.94

20.94

20.94

18.75

18.75

9.45

9.45

11.13

13.18

13.18

14.81

14.81

14.81

17.85

14.81

11.13

13.18

13.18

17.85

17.85

17.85

18.75

9.000

11.000

7.250

14.000

58.82

55.07

51.28

40.39

47.53

45.53

49.28

43.39

41.89

26.85

26.35

30.83

36.60

36.60

36.34

37.84

36.34

36.22

34.84

30.83

35.22

35.22

38.34

37.22

39.34

38.89

16.000

8.500

12.500

10.500

.25 1/2-13

5/8-11

7.250 8.500

10.5009.000

7.250 8.500

10.5009.000

7.250 8.500

10.5009.000

11.000 12.500

11.000 12.500

11.000 12.500

11.000 12.500

11.000 12.500

11.000 12.500

11.000 12.500

11.000 12.500

11.000 12.500

11.000 12.500

11.000 12.500

14.000 16.000

14.000 16.000

14.000 16.000

14.000 16.000

14.000 16.000

1/2-13

1/2-13

1/2-13

1/2-13

1/2-13

1/2-13

1/2-13

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

5/8-11

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25

.25


*Shown with optional encoder conduit box

DimensionsBlue Max® 2000 Vector DutyTotally Enclosed Blower Cooled (TEBC), C-Face with Rigid Base



33

Factory Build-Up MotorsBlue Max® 2000 Vector Duty

Footnotes:20:1 20:1 Constant Torque (2000:1 C.T. 60 minute duty)

1 3600 143T $792 1.5 N/A N/A1800 N/A 143T $720 1.5 N/A N/A1200 145T $796 1.7 N/A N/A900 184T $1,186 2.5 184T $1,186 R.T.M. N/A

1 1/2 3600 145T $796 2.0 N/A N/A1800 N/A 145T $724 2.3 N/A N/A1200 184T $922 2.4 N/A N/A900 213T $1,667 3.6 213T $1,667 R.T.M. 213T $2,455 R.T.M.

2 3600 145T $819 2.7 N/A N/A1800 N/A 145T $780 3.0 N/A N/A1200 184T $1,250 3.0 184T $1,250 R.T.M. N/A900 213T $1,772 3.8 213T $1,719 4.8 213T $2,507 R.T.M.

3 3600 182T $1,078 3.7 182T $1,078 R.T.M. 20:1 N/A1800 N/A 182T $980 4.0 182T $980 R.T.M. N/A1200 213T $1,688 4.5 213T $1,688 R.T.M. 213T $2,476 R.T.M.900 254T $3,119 4.6 215T $2,025 5.0 254T $3,979 R.T.M.

5 3600 184T $1,542 6.2 213T $1,542 R.T.M. 20:1 213T $2,330 R.T.M.1800 N/A 184T $1,095 6.7 184T $1,095 6.7 N/A1200 215T $2,381 7.2 215T $1,757 6.9 215T $2,545 R.T.M.900 256T $3,406 7.6 254T $2,218 8.5 256T $4,266 R.T.M.

7 1/2 3600 213T $1,773 9.5 213T $1,515 9.5 20:1 213T $2,303 R.T.M.1800 N/A 213T $1,475 10.5 213T $1,281 9.7 213T $2,069 R.T.M.1200 254T $2,970 11.0 254T $2,112 11.0 254T $2,972 R.T.M.900 284T $4,007 11.0 256T $2,525 11.0 256T $4,266 12.0

10 3600 215T $2,200 12.0 215T $1,757 12.0 20:1 215T $2,545 R.T.M.1800 N/A 215T $1,750 13.0 215T $1,531 12.7 215T $2,319 R.T.M.1200 256T $3,244 15.5 256T $2,405 13.5 256T $3,265 R.T.M.900 286T $5,967 17.0 284T $2,943 14.5 284T $5,123 15.5

15 3600 256T $2,972 18.0 254T $2,112 18.0 20:1 254T $2,972 R.T.M.1800 N/A 254T $2,095 20.2 254T $1,844 18.5 254T $2,704 R.T.M.1200 284T $3,816 20.4 284T $2,803 22.0 284T $4,110 20.0900 324T $6,768 26.0 286T $3,364 21.0 286T $5,579 26.0

20 3600 286T $3,265 23.5 256T $2,405 23.4 20:1 256T $3,265 R.T.M.1800 N/A 256T $2,900 26.0 256T $2,040 26.0 256T $2,900 R.T.M.1200 326T $5,683 29.5 286T $3,204 27.0 286T $5,313 26.2900 365T $7,462 28.0 326T $4,356 31.0 324T $6,563 32.0

25 3600 286TS R.T.M. 28.0 284TS R.T.M. 29.0 284TS $3,816 29.01800 N/A 284T $3,095 31.0 284T $2,548 31.5 284T $3,561 31.51200 364T $6,768 31.0 324T $4,149 33.0 324T $6,250 33.5900 404T $8,837 33.0 364T $5,390 35.5 326T $7,219 35.0

30 3600 N/A R.T.M. 286TS R.T.M. 35.0 286TS $4,217 35.01800 N/A 326T $4,806 40.0 286T $2,913 38.5 286T $3,926 37.01200 N/A 365T $8,416 42.0 326T $5,133 38.5 326T $6,875 41.0900 364T $6,303 44.0 405T $11,980 40.0 364T $6,946 44.0 364T $8,709 44.0

40 3600 N/A R.T.M. 324TS R.T.M. 48.0 20:1 324TS $5,341 45.51800 N/A 364T $6,194 48.0 324T $3,772 50.0 324T $4,703 50.01200 364T $6,635 52.0 405T $11,643 48.5 364T $6,615 52.0 364T $8,294 49.5900 365T $7,244 R.T.M. 444T $14,046 56.0 365T $8,676 56.0 365T $10,439 55.5

50 3600 N/A R.T.M. 326TS R.T.M. 59.0 20:1 326TS $6,325 57.01800 N/A L365T $7,888 59.5 326T $4,666 60.5 326T $5,391 60.01200 365T $7,625 R.T.M. 444T $13,377 61.5 365T $8,263 62.0 365T $9,942 62.0900 404T $8,294 68.0 445T $16,707 70.0 404T $9,662 66.0 404T $11,580 69.0

DRIPPROOF, TOTALLY ENCLOSED, TOTALLY ENCLOSED TOTALLY ENCLOSEDFORCE VENTILATED NON-VENTILATED FAN COOLED BLOWER COOLED

HP RPM 2000:1 CONSTANT TORQUE 2000:1 CONSTANT TORQUE 2000:1 CONSTANT TORQUE 2000:1 CONSTANT TORQUELIST 460V LIST 460V LIST 460V FOOT LIST 460V

FRAME PRICE FLA FRAME PRICE FLA FRAME PRICE FLA NOTES FRAME PRICE FLA

Multiplier Symbol E3Factory Options Starting on Page 78


R.T.M. Refer to Marathon Electric N/A Not Available



R.T.M. Refer to Marathon Electric N/A Not Available

60 3600 N/A R.T.M. 364TS $6,615 R.T.M. 20:1 364TS $8,141 67.01800 364T $5,500 72.0 405T $9,496 68.0 364T $6,014 74.0 364T $6,600 74.01200 404T $8,731 71.5 445T $15,911 73.0 404T $9,202 71.0 404T $11,029 71.0900 405T $12,833 80.0 445T $17,502 85.0 405T $10,648 80.0 405T $14,110 80.0

75 3600 N/A R.T.M. 365TS $8,263 84.0 20:1 365TS $9,789 84.01800 365T $6,575 90.0 444T $12,348 87.0 365T $6,813 92.0 365T $7,890 90.01200 405T $9,653 93.0 445T $16,707 105 405T $10,141 95.0 405T $13,438 90.0900 444T $13,836 95.0 449T $27,795 110 444T $13,846 108 444T $16,043 107

100 3600 N/A R.T.M. 405TS $10,141 110 20:1 405TS $11,936 1121800 404T $9,747 118 445T $14,279 110 405T $9,219 115 405T $11,014 1151200 444T $12,660 118 449T $26,471 124 444T $13,187 125 444T $15,279 125900 445T $15,496 128 449T $30,682 135 445T $16,012 142 445T $18,704 133

125 3600 N/A R.T.M. 444TS $13,187 148 20:1 444TS $15,089 R.T.M.1800 405T $11,448 148 445T $16,663 158 444T $11,988 143 444T $13,890 1381200 445T $14,172 147 449T $29,221 154 445T $15,250 153 445T $17,813 153900 447T $20,370 172 5011 $45,350 178 449T $19,362 172 445T $21,560 169

150 3600 N/A R.T.M. 445TS $15,250 R.T.M. 20:1 445TS $17,152 1681800 444T $12,674 176 449T $21,545 173 445T $13,863 170 445T $15,765 1701200 445T $16,673 177 449T $31,266 205 449T $18,440 192 445T $20,533 186900 447T $21,796 210 5011 $49,560 210 449T $24,159 202 449T $30,419 218

200 3600 N/A N/A 449TS $18,440 R.T.M. 20:1 449TS $20,940 2261800 445T $14,775 228 L449T $24,552 260 445T $16,764 230 445T $18,666 2301200 449T $18,525 236 N/A 449T $23,009 240 449T $28,971 239900 449T $23,321 270 N/A 5011 $47,200 275 20:1 449T $32,920 275

250 3600 N/A R.T.M. 449TS $25,509 2741800 447T $17,949 290 N/A 449T $20,917 280 449T $23,417 2801200 449T $19,822 298 449T $28,971 302 20:1 449T $31,721 302900 508U $27,421 325 5011 $51,350 340 20:1 5011 $53,850 325

300 1800 447T $19,525 332 449T $23,837 330 449T $26,337 3301200 449T $24,445 340 N/A 5011 $44,900 360 20:1 449T $37,803 350900 510U $30,163 --- 5013 $57,740 420 20:1 5013 $58,580 410

350 1800 447T $21,610 405 L449T $32,127 386 20:1 449T $28,837 3851200 449T $26,156 412 N/A 5013 $51,500 415 20:1 5011 $53,500 408900 510U $33,179 430 N/A 5013 $63,580 458

400 1800 447T $23,642 460 5011 $42,080 444 20:1 5011 $43,800 4321200 508U $36,572 460 N/A 5013 $53,900 485 20:1 5011 $55,900 468900 N/A N/A 5013 $77,923 522

450 1800 449T $25,501 510 N/A 5011 $47,800 508 20:1 5011 $49,075 5101200 N/A N/A 5011 $57,211 522

500 1800 449T $27,421 545 N/A 5013 $59,500 570 20:1 5011 $53,700 5551200 N/A N/A 5013 $63,818 590

600 1800 510U $40,763 640 N/A N/A 5011 $58,900 655650 1800 510U $44,200 695 N/A N/A 5013 $78,964 R.T.M.700 1800 510U $48,000 790 N/A N/A 5013 $82,500 R.T.M.750 1800 5013 $77,548 795 N/A N/A N/A800 1800 5013 $81,425 900 N/A N/A N/A

DRIPPROOF, TOTALLY ENCLOSED, TOTALLY ENCLOSED TOTALLY ENCLOSEDFORCE VENTILATED NON-VENTILATED FAN COOLED BLOWER COOLED

HP RPM 2000:1 CONSTANT TORQUE 2000:1 CONSTANT TORQUE 2000:1 CONSTANT TORQUE 2000:1 CONSTANT TORQUELIST 460V LIST 460V LIST 460V FOOT LIST 460V

FRAME PRICE FLA FRAME PRICE FLA FRAME PRICE FLA NOTES FRAME PRICE FLA

Multiplier Symbol E3Factory Options Starting on Page 78

Footnotes:20:1 20:1 Constant Torque (2000:1 C.T. 60 minute duty)


35


Totally Enclosed Non-Ventilated, 60 Minute Duty

Applications: Designed for inverter or vector applications where full torque at zero speed or precisepositioning control is required and continuous duty is not required. Typical uses includecrane and hoist, or other duty cycle or time rated applications installed in a dusty or dirtyenvironment where cast iron construction is required.

Features: • MAX GUARD® Class F insulation system• Constant torque operation from 0 to base speed on vector drive• Constant HP operation to up to twice base speed• 60 minute duty at 40º C ambient• Normal NEMA frame size• Optimized for operation with IGBT inverter (NEMA Design A)• Class F normally closed thermostats• Ball bearing (roller bearing available 360 Frame & larger)• Cast iron frame and brackets• F1 standard, field reversible to F2• UL Recognized and CSA Certified (contact factory for CE marking)• Three year warranty

1 1800 143T TSTAT $720 E3 1.51200 145T TSTAT $796 E3 1.7

1 1/2 1800 145T TSTAT $724 E3 2.31200 184T TSTAT $922 E3 2.5

2 1800 145T TSTAT $780 E3 2.81200 184T TSTAT $1,250 E3 3.4

3 1800 182T TSTAT $980 E3 4.31200 213T TSTAT $1,688 E3 5.0

5 1800 184T TSTAT $1,095 E3 6.61200 215T TSTAT $1,757 E3 8.0

7 1/2 1800 213T TSTAT $1,281 E3 10.01200 254T TSTAT $2,112 E3 11.0

10 1800 215T TSTAT $1,531 E3 13.01200 256T TSTAT $2,405 E3 14.5

15 1800 254T TSTAT $1,844 E3 19.91200 284T TSTAT $2,803 E3 20.5

20 1800 256T TSTAT $2,900 E3 26.01200 286T TSTAT $3,204 E3 26.0

25 1800 284T TSTAT $2,548 E3 31.51200 324T TSTAT $4,149 E3 33.0

30 1800 286T TSTAT $2,913 E3 40.01200 326T TSTAT $5,133 E3 40.5

40 1800 324T TSTAT $3,772 E3 50.01200 364T TSTAT $6,615 E3 51.0

50 1800 326T TSTAT $4,666 E3 63.01200 365T TSTAT $8,263 E3 65.0

60 1800 364T TSTAT $6,014 E3 75.01200 404T TSTAT $9,202 E3 76.0

75 1800 365T TSTAT $6,813 E3 90.01200 405T TSTAT $10,141 E3 95.0

100 1800 405T TSTAT $9,219 E3 1171200 444T TSTAT $13,187 E3 125

125 1800 444T TSTAT $11,988 E3 1461200 445T TSTAT $15,250 E3 155

150 1800 445T TSTAT $13,863 E3 1661200 445T TSTAT $18,440 E3 186

HP RPM FRAME OVER LIST MULT. 460 VOLT FOOTLOAD PRICE SYMB. FLA NOTES



Factory Build-Up MotorsBlue Max® 2000 Vector DutyTotally Enclosed Non-Ventilated, 60 Minute Duty

200 1800 445T TSTAT $16,764 E3 2261200 449T TSTAT $23,009 E3 240

250 1800 449T TSTAT $20,917 E3 2801200 449T TSTAT $28,971 E3 305

300 1800 449T TSTAT $23,837 E3 3301200 L449T TSTAT $36,214 E3 370

350 1800 L449T TSTAT $29,935 E3 3861200 5011 TSTAT $48,889 E3 410

400 1800 L449T TSTAT $35,922 E3 4601200 5011 TSTAT $50,101 E3 470

450 1800 5011 TSTAT $45,200 E3 5201200 5013 TSTAT $60,231 E3 525

500 1800 5011 TSTAT $56,291 E3 5551200 5013 TSTAT $62,500 E3 585

600 1800 5013 TSTAT $67,549 E3 680650 1800 5013 TSTAT $72,953 E3 750

HP RPM FRAME OVER LIST MULT. 460 VOLT FOOTLOAD PRICE SYMB. FLA NOTES


37

Blue Max® 2000 Vector Duty, 2000:1 Constant TorqueExplosion Proof, Class I Group D (Group C as noted), Class II Groups F & G

Totally Enclosed Non-Ventilated, C-Face with Rigid Base and Encoder

Applications: Designed for industrial applications with Vector Drives where up to a 2000:1 constanttorque speed range and/or precise speed or torque regulation is required, includingpositioning equipment. Used in dirty, dusty or caustic environments where cast ironconstruction is required, and installed in hazardous environments as defined by themotor's explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous locations.

Features: • BEI H38 explosion proof encoder 1024 ppr, Class I Groups C & D, Class II Groups E, F, G • MAX GUARD® Class F insulation system• Constant torque operation from 0 to base speed on vector drive• Constant HP operation up to twice base speed• Continuous duty at 40º C ambient• Optimized for operation with IGBT inverter (NEMA Design A)• Class F normally closed thermostats• Ball bearing• Cast iron frame and brackets• F1 standard, NOT field reversible to F2• CSA Certified, under file #LR47504 and #LR21839• UL Listed, temperature code T3B, under file #E12044• Three year warranty

1 1800 230/460 143TC TSTAT Y978✯ 143THEN8034 $3,922 E3 3.0/1.5 84 21.44 CD2 1800 230/460 145TC TSTAT Y979✯ 145THEN8034 $4,004 E3 5.8/2.9 90 21.44 CD3 1800 230/460 182TC TSTAT Y980✯ 182THES8048 $4,133 E3 8.2/4.1 168 24.82 CD5 1800 230/460 213TC TSTAT Y981✯ 213THES8053 $4,203 E3 13.0/6.5 225 27.42 d

1800 230/460 213TC TSTAT Y968✯ TBD $4,348 E3 13.0/6.5 225 27.42 CD7 1/2 1800 230/460 254TC TSTAT Y982✯ 254THEN8058 $4,945 E3 25.0/12.5 260 30.20 CD10 1800 230/460 254TC TSTAT Y983✯ 254THEN8059 $5,181 E3 27.0/13.5 390 30.20 CD15 1800 230/460 254TC TSTAT Y984✯ 254THEN8060 $5,416 E3 40.4/20.2 400 30.20 CD20 1800 230/460 284TC TSTAT Y985✯ 284THEN8032 $5,978 E3 57.6/28.8 555 33.16 CD

OVER CAT. MODEL LIST MULT. F.L. WGHT. "C" FOOTHP RPM VOLTS FRAME LOAD NO. NO. PRICE SYMB. AMPS LBS. DIM. NOTES

✯ Stock ModelBlue shaded areas are cast iron frames.

included

See dimensions page 38

Footnotes:d To be discontinued after current stock is goneCD Class I Groups C & D, Class II Groups F & G


E

DimensionsBlue Max® 2000 Vector DutyExplosion Proof, Class I Groups C & D, Class II Groups F & GTotally Enclosed Non-Ventilated, C-Face with Rigid Base and Encoder

O P AB AGFRAME D E 2F H MAX. MAX. U AA MAX. MAX. AH AJ AK BA BB BF BS KEY

143TC 3.50 2.75 4.00 .34 7.48 8.06 .875 .50 8.25 12.00 2.12 5.875 4.500 2.88 .13 3/8 - 16 5.62 .19 X .19 X 1.39145TC 3.50 2.75 5.00 .34 7.48 8.06 .875 .50 8.25 12.00 2.12 5.875 4.500 2.88 .13 3/8 - 16 5.62 .19 X .19 X 1.39182TC 4.50 3.75 4.50 .41 11.61 9.76 1.125 .75 9.34 14.94 2.62 7.250 8.500 3.50 .27 1/2 - 13 2.75 .25 X .25 X 1.75213TC 5.25 4.25 5.50 .41 13.62 11.5 1.375 .75 10.94 16.98 3.12 7.250 8.500 4.25 .28 1/2 - 13 4.12 .31 X .31 X 2.38254TC 6.25 5.00 8.25 .53 14.09 14.27 1.625 1.25 13.67 18.25 3.75 7.250 8.500 4.75 .28 1/2 - 13 4.12 .38 X .38 X 2.88284TC 7.00 5.50 9.50 .53 15.57 15.89 1.8275 1.50 16.44 21.46 4.38 9.000 10.500 4.75 .27 1/2 - 13 4.75 .50 X .50 X 3.25



39

Factory Build-Up MotorsBlue Max® Vector Duty, 2000:1 Constant Torque

Explosion Proof, Class I Groups C & D, Class II Groups F & GTotally Enclosed Non-Ventilated, Rigid Base

1 1800 143T TSTAT $1,257 E3 1.5 45 14.121200 145T TSTAT $1,274 E3 1.7 60 14.12

2 1800 145T TSTAT $1,339 E3 2.9 58 14.121200 182T TSTAT $1,418 E3 3.2 115 17.50

3 1800 182T TSTAT $1,468 E3 4.1 100 17.501200 213T TSTAT $1,503 E3 4.7 170 20.10

5 1800 213T TSTAT $1,683 E3 6.5 170 20.101200 254T TSTAT $1,924 E3 7.2 190 22.88

7 1/2 1800 254T TSTAT $2,280 E3 12.5 290 22.881200 256T TSTAT $2,977 E3 10.2 375 23.88

10 1800 254T TSTAT $2,516 E3 13.5 340 22.881200 284T TSTAT $3,686 E3 16.0 575 25.84

15 1800 254T TSTAT $2,751 E3 20.2 350 22.881200 286T TSTAT $4,720 E3 21.5 675 26.84

20 1800 284T TSTAT $3,313 E3 26.8 515 25.841200 326T TSTAT $6,197 E3 27.0 750 31.59

25 1800 286T TSTAT $4,386 E3 32.5 R.T.M. R.T.M.1200 364T TSTAT $9,638 E3 35.0 R.T.M. R.T.M.






100 1800 445T TSTAT $24,438 E3 112 R.T.M. R.T.M.1200 449T TSTAT $27,248 E3 124 R.T.M. R.T.M.

125 1800 449T TSTAT $25,463 E3 139 R.T.M. R.T.M.1200 449T TSTAT $27,482 E3 153 R.T.M. R.T.M.

150 1800 449T TSTAT $27,825 E3 167 R.T.M. R.T.M.

OVER LIST MULT. 460 VOLT WGHT. “C” FOOTHP RPM FRAME LOAD PRICE SYMB. F.L. AMPS LBS. DIM. NOTES

Blue shaded areas are cast iron frames.

Applications: Designed for industrial applications with Vector Drives where up to a 2000:1 constanttorque speed range and/or precise speed or torque regulation is required, includingpositioning equipment. Used in dirty, dusty or caustic environments where cast ironconstruction is required, and installed in hazardous environments as defined by themotor's explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous locations.

Features: • Same features as Blue Max® 2000 Vector Duty, 2000:1 Constant Torque Explosion Proof except BEI encoder is optional (reference page 37)

• Add for encoder (see Optional Encoders below for pricing)

R.T.M. - Refer to Marathon Electric

Blue Max® 2000 Vector Duty, Explosion ProofOptional Encoders

BEI H38 143-449 Coupled 7200 Optical Included $2,665 E3 Class I Groups C & D, Class II Groups E, F, & GDynapar X25 143-449 Coupled 5000 Optical Included $2,665 E3 Class I Groups C & D, Class II Groups E, F, & G

BRAND/ MOUNTING RESOLUTION SENSOR MARKER LIST MULT.MODEL FRAME TYPE (PPR) MAX. TYPE PULSE PRICE SYMB. NOTES



Blue Max® Vector Duty, 2000:1 Constant TorqueTotally Enclosed Non-Ventilated BrakemotorsC-Face with Rigid Base

Blue Max® Vector Duty, BrakemotorsEncoders Through Mod Central

SL56 1024 A786✯ KIT LKSR-CFACE $1,589 E3 Fits motor catalog number Y986 & Y987SL56 1024 A789✯ KIT SL561024-182NV $1,589 E3 Fits motor catalog number Y988SL85 1024 A790✯ KIT SL851024-184NV $2,024 E3 Fits motor catalog number Y989SL85 1024 A791✯ KIT SL851024-210NV $2,024 E3 Fits motor catalog number Y990 & Y991SL85 1024 A792✯ KIT SL851024-250NV $2,024 E3 Fits motor catalog number Y992 & Y993

BRAND/ CAT. KIT LIST MULT.MODEL PPR NO. NUMBER INSTALLED SYMB. NOTES

Applications: Designed for industrial applications with Vector Drives where up to a 2000:1 constanttorque speed range and/or precise speed or torque regulation is required, includingpositioning equipment. Used in dirty, dusty or caustic environments where cast ironconstruction is required. Brakemotors are utilized in applications requiring braking action faster than coast down, including holding overhauling loads.

Features: • MAX GUARD® Class F insulation system• Constant torque operation from 0 to base speed on vector drive• Constant HP operation up to twice base speed• Continuous duty at 40º C ambient• Optimized for operation with IGBT inverter (NEMA Design A)• Class F normally closed thermostats• Ball bearing (roller bearing available 360 Frame & larger)• Cast iron frame and brackets• Includes 140% rated spring-set self-adjusting NEMA 2 disk brake

(brake coil voltage matches motor)• Horizontal mounting (see Brake section in rear of catalog for vertical adders)• UL recognized and CSA certified (contact factory for CE marking)• Three year warranty (brake disks exempt)

1 1800 230/460 143TC Y986✯ 143THTN8036 $1,190 E3 3.0/1.5 6 67 17.00 SL562 1800 230/460 145TC Y987✯ 145THTN8043 $1,325 E3 6.0/3.0 10 77 18.00 SL563 1800 230/460 182TC Y988✯ 182THTS8048 $1,735 E3 8.2/4.1 15 120 19.67 SL565 1800 230/460 184TC Y989✯ 184THTS8056 $2,091 E3 13.4/6.7 25 145 25.58 SL85

7 1/2 1800 230/460 213TC Y990✯ 213THTS8071 $2,621 E3 21.0/10.5 35 226 27.58 SL8510 1800 230/460 215TC Y991✯ 215THTS8071 $3,115 E3 26.0/13.0 50 332 28.83 SL8515 1800 230/460 254TC Y992✯ 254THTNA8071 $3,958 E3 40.5/20.2 75 350 31.53 SL8520 1800 230/460 256TC Y993✯ 256THTNA8071 $5,246 E3 52.0/26.0 105 390 35.28 SL85

CAT. MODEL LIST MULT. F.L. BRAKE TQ WGHT. "C" ENCODERHP RPM VOLTS FRAME NO. NO. PRICE SYMB. AMPS (LB-FT) LBS. DIM. SERIES

See dimensions page 41

For more information about brakes, see page 41 for technical Brake Data.

✯ Stock Model

✯ Stock Model


41

DimensionsBlue Max® 2000 Vector Duty

Totally Enclosed Non-Ventilated BrakemotorsC-Face with Rigid Base

.19x.19x1.38143TC 3.50 2.75 4.00 .44 2.127.45 10.96 6.91 2.62.875 4.5005.875 3/8-163/4 .13 2.8114.8815.88 3.81.133/4 3/8-165.875 4.500.875 2.626.9110.967.45 2.12.445.002.753.50145TC .19x.19x1.3817.05 2.25.273/4 1/2-137.250 8.5001.125 3.508.0112.8911.61 2.62.444.503.754.50182TC .25x.25x1.7522.96 3.38.273/4 1/2-137.250 8.5001.125 3.508.0012.9111.70 2.62.445.503.754.50184TC .25x.25x1.7524.46 3.50.273/4 1/2-137.250 8.5001.375 4.259.3015.0513.22 3.12.447.004.255.25213TC .31x.31x2.3825.71 4.75.273/4 1/2-137.250 8.5001.375 4.259.3015.0513.22 3.12.448.254.255.25215TC .31x.31x2.3829.53 4.12.271 1/4 1/2-137.250 8.5001.625 4.1210.8719.1514.09 3.75.5610.005.006.25254TC .38x.38x2.8831.53 4.75.271 1/4 1/2-137.250 8.5001.625 4.7511.6518.8116.49 3.75.5610.005.00

- -------

5.505.507.007.00

--10.0010.006.25256TC .38x.38x2.88

FRAME D E 2F 2FF 2FFF H O P U AA AB AG AH AJ AK BA BB BF BS KEYMAX. MAX. MAX. MAX.


Brake Data - Stock MotorsNominalStatic Coil Stearns Optional Space

Torque Size Voltage 115 230 460 Series Heater Watts1.5

4Inrush 3.6 1.8 0.9

115V 303 Holding 0.3 0.2 0.0856,0006

K4Inrush 4.3 2.2 1.1

230V 3010 Holding 0.3 0.2 0.0815 Inrush 13 6.5 3.225 6 Holding 0.6 0.3 0.2 115V 3050

87,00035 Inrush 17.6 8.8 4.275 8 Holding 1.2 0.6 0.3 230V 30105

See Brake selection and pricing page for "Buildup" Brakemotors


Factory Build-Up MotorsBlue Max® Vector Duty, 2000:1 Constant TorqueTotally Enclosed Brakemotors, Rigid Base

Applications: Designed for industrial applications with Vector Drives where up to a 2000:1 constant torque speed rangeand/or precise speed or torque regulation is required, including positioning equipment. Used in dirty, dustyor caustic environments where cast iron construction is required. Brakemotors are utilized in applicationsrequiring braking action faster than coast down, including holding overhauling loads.

Features: • MAX GUARD® Class F insulation system• Constant torque operation from 0 to base speed on vector drive, including TEFC

(On Volts/Hertz drives, TEFC motors are limited to 20:1 Constant Torque)• Constant HP operation up to twice base speed• Continuous duty at 40º C ambient• Optimized for operation with IGBT inverter (NEMA Design A)• Class F normally closed thermostats• Ball bearing (roller bearing available 360 Frame & larger)• Cast iron frame and brackets• Patented “fracket” design• Includes 140% rated spring-set self-adjusting NEMA 2 disk brake (brake coil voltage matches motor unless

otherwise specified)• Horizontal mounting (see Brake section in rear of catalog for vertical adders)• Severe Duty price includes NEMA 4, cast iron brake (6 & 10 lb-ft brakes have steel housings)• UL recognized and CSA certified (contact factory for CE marking)• Three year warranty (brake disks exempt)

1 1800 143T TENV $1,123 $1,308 E3 1.5 6 A SL56, M56 $1,5891200 145T TENV $1,199 $1,384 E3 1.7 6 A SL56, M56 $1,589

1 1/2 1800 145T TENV $1,202 $1,378 E3 2.4 10 A SL56, M56 $1,5891200 184T TENV $1,578 $1,748 E3 2.9 15 A SL85, M85 $2,024




7 1/2 1800 213T TENV $2,522 $3,153 E3 10.5 35 A SL85, M85 $2,0241200 254T TENV $4,265 $4,943 E3 11.0 50 A SL85, M85 $2,024

10 1800 215T TENV $3,016 $3,679 E3 13.0 50 A SL85, M85 $2,0241200 256T TEFC $4,534 $5,267 E3 13.5 75 B N/A N/A1200 256T TENV $4,973 $5,706 E3 13.1 75 A SL85, M85 $2,024

15 1800 254T TENV $3,824 $4,557 E3 19.5 75 A SL85, M85 $2,0241200 284T TEFC $6,073 $6,893 E3 21.5 105 B N/A N/A1200 284T TENV $6,086 $6,906 E3 20.0 105 A SL85, M85 $2,024

20 1800 256T TENV $5,112 $5,920 E3 27.0 105 A SL85, M85 $2,0241200 286T TEFC $8,445 $9,820 E3 27.0 125 B N/A N/A1200 326T TENV $11,030 $12,454 E3 29.5 125 C SL56, M56 $1,4351200 286T TEBC $13,304 $14,679 E3 26.2 125 D SL56, M56 $1,435

25 1800 284T TENV $5,365 $6,185 E3 31.5 105 A SL85, M85 $2,0241200 324T TEFC $9,838 $11,327 E3 33.0 175 B N/A N/A1200 364T TENV $12,579 $14,151 E3 34.5 175 C SL56, M56 $1,4351200 324T TEBC $15,002 $16,491 E3 32.5 175 D SL56, M56 $1,435

STANDARD SEVERE MULT. 460 VOLT BRAKE TQ REF. DWG ENCODERSHP RPM FRAME ENCL. DUTY DUTY SYMB. F.L. AMPS (LB-FT) ABOVE SERIES LIST ADDER


A B C D

N/A Not Available Continued on next page

E

Consult Factoryfor this Option

Factory Build-Up MotorsBlue Max® Vector Duty, 2000:1 Constant Torque

Totally Enclosed Brakemotors, Rigid Base


43

30 1800 286T TEFC $8,154 $9,529 E3 39.0 125 B N/A N/A1800 326T TENV $10,153 $11,577 E3 42.0 125 C SL56, M56 $1,4351800 286T TEBC $11,554 $12,929 E3 37.0 125 D SL56, M56 $1,4351200 326T TEFC $11,229 $12,792 E3 39.0 230 B N/A N/A1200 365T TENV $14,634 $16,280 E3 42.0 230 C SL56, M56 $1,4351200 326T TEBC $16,034 $17,597 E3 41.0 230 D SL56, M56 $1,435




75 1800 365T TEFC $14,909 $16,324 E3 90.0 330 B N/A N/A1800 444T TENV $20,662 $22,507 E3 87.0 330 C SL56, M56 $1,4351800 365T TEBC $19,361 $20,776 E3 90.0 330 D SL56, M56 $1,4351200 405T TEFC $23,850 $25,549 E3 89.0 550 B N/A N/A1200 445T TENV $30,445 $32,339 E3 105 550 C SL56, M56 $1,4351200 405T TEBC $30,835 $32,534 E3 88.0 550 D SL56, M56 $1,435

100 1800 405T TEFC $18,302 $20,077 E3 110 440 B N/A N/A1800 445T TENV $23,391 $25,361 E3 110 440 C SL56, M56 $1,4351800 405T TEBC $23,785 $25,560 E3 115 440 D SL56, M56 $1,4351200 444T TEFC $27,178 $29,249 E3 125 750 B N/A N/A1200 449T TENV $40,462 $42,531 E3 124 750 C SL56, M56 $1,4351200 444T TEBC $33,270 $35,339 E3 125 750 D SL56, M56 $1,435



200 1800 445T TEFC $31,919 $33,988 E3 230 1000 B N/A N/A1800 L449T TENV $39,707 $41,776 E3 235 1000 C SL56, M56 $1,4351800 445T TEBC $37,821 $39,890 E3 230 1000 D SL56, M56 $1,435

STANDARD SEVERE MULT. 460 VOLT BRAKE TQ REF. DWG ENCODERSHP RPM FRAME ENCL. DUTY DUTY SYMB. F.L. AMPS (LB-FT) PG. 42 SERIES LIST ADDER

Blue shaded areas are cast iron frames. N/A Not Available


Factory Build-Up MotorsBlue Max® Vector Duty, 2000:1 Constant TorqueExplosion Proof BrakemotorsClass I Groups C & D, Class II Group F & GTotally Enclosed Non-Ventilated, Rigid Base

Applications: Designed for industrial applications with Vector Drives where up to a 2000:1 constanttorque speed range and/or precise speed or torque regulation is required, includingpositioning equipment. Used in dirty, dusty or caustic environments where cast ironconstruction is required. Brakemotors are utilized in applications requiring braking action faster than coast down, including holding overhauling loads.

Features: • MAX GUARD® Class F insulation system• Constant torque operation from 0 to base speed on vector drive• Constant HP operation up to twice base speed• Continuous duty at 40º C ambient• Optimized for operation with IGBT inverter (NEMA Design A)• Class F normally closed thermostats• Ball bearing (roller bearing available 360 Frame & larger)• Cast iron frame and brackets• Includes 140% rated spring-set self-adjusting disk brake

(brake coil voltage matches motor unless otherwise specified)• Horizontal mounting (see Brake section in rear of catalog for vertical adders)• Encoders not available• UL Listed and CSA Certified (contact factory for CE marking)• Three year warranty (brake disks exempt)

1 1800 143T $3,622 E3 1.5 6 95 28.851200 145T $3,639 E3 1.7 6 100 32.25

2 1800 145T $4,294 E3 2.9 10 130 32.251200 182T $4,540 E3 3.2 15 178 32.25

3 1800 182T $4,590 E3 4.1 15 168 32.251200 213T $4,916 E3 4.7 25 233 37.43

5 1800 213T $5,096 E3 6.5 25 253 37.431200 254T $5,691 E3 7.2 35 253 32.79

7 1/2 1800 254T $6,047 E3 12.5 35 288 32.791200 256T $7,235 E3 10.2 50 439 34.54

10 1800 254T $6,774 E3 13.5 50 389 32.791200 284T $8,948 E3 16.0 75 650 35.11

15 1800 254T $7,955 E3 20.2 75 415 32.791200 286T $11,466 E3 21.5 105 747 36.61

20 1800 284T $10,059 E3 26.8 105 697 35.111200 326T $21,165 E3 27.0 125 891 39.23

25 1800 286T $11,132 E3 32.5 105 772 36.611200 364T $25,509 E3 35.0 175 1041 43.85

30 1800 326T $21,801 E3 40.0 125 916 39.231200 365T $27,599 E3 41.5 230 1095 44.85

40 1800 364T $25,321 E3 48.0 175 916 43.851200 405T $32,470 E3 48.5 330 1395 48.19

50 1800 405T $31,895 E3 57.0 230 1395 48.191200 444T $39,632 E3 62.5 330 2095 52.81

60 1800 405T $33,446 E3 68.0 330 1445 48.1975 1800 444T $39,485 E3 86.0 330 2045 52.81

LIST MULT. 460 VOLT BRAKE TQ. APPROX APPROX FOOTHP RPM FRAME PRICE SYMB. F.L. AMPS (LB-FT) WT (LBS) “C” DIM.* NOTES

*When removing brake housing, the following clearance is required.

BRAKETORQUE CLEARANCE

6-105 4.50”125-330 6.00”


45

25 500 2000 364T $8,109 E3 58.030 850 2750 364T $6,672 E3 54.0

650 2600 364T $7,888 E3 62.0500 2000 365T $9,319 E3 68.0

40 850 2750 365T $8,112 E3 70.5650 2600 365T $8,895 E3 81.5500 2000 404T $10,722 E3 88.5

50 850 2750 404T $9,045 E3 88.0650 2600 404T $10,624 E3 100500 2000 405T $12,592 E3 110

60 850 2750 405T $11,448 E3 105650 2600 405T $12,592 E3 120500 2000 444T $13,941 E3 127

75 850 2750 444T $12,674 E3 127650 2600 445T $15,071 E3 145500 2000 445T $16,253 E3 155

100 850 2750 445T $15,199 E3 165650 2600 447T $18,847 E3 195500 2000 447T $20,793 E3 210

125 850 2750 447T $15,928 E3 210650 2600 447T $21,610 E3 240500 2000 449T $25,501 E3 255

150 850 2750 447T $20,502 E3 250650 2600 449T $24,824 E3 285500 2000 449T $30,163 E3 310

200 850 2750 449T $21,804 E3 330650 2600 449T $30,163 E3 380 92500 2000 508U $36,572 E3 415

250 850 2750 449T $23,330 E3 410 92650 2600 508U $35,840 E3 475 92500 2000 508U $42,057 E3 515 92

300 850 2750 508U $35,474 E3 490 92650 2600 510U $38,724 E3 570 92500 2000 510U $50,342 E3 615 92

350 850 2750 510U $34,548 E3 570 92650 2600 510U $45,292 E3 655 92

Factory Build-Up MotorsBlue Max® 2000 Wide Constant Horsepower Range Motors

Dripproof, Force Ventilated (DPFV)2000:1 Constant Torque

Applications: For use in process applications such as center winders, payoff and tension reels, uncoilers, recoilers, scrap choppers, and slitters.

Features: • MAX GUARD® Class F Insulation System• Continuous duty at 40º C ambient• 1 minute overload @ 150% of rated torque below base speed• 125% overload capability to maximum constant HP RPM • 1.0 service factor• Class F normally closed thermostats• Ball bearings• UL Recognized and CSA Certified• Three year warranty

BASE MAX CHP LIST MULT. BASE RPM FOOTHP RPM RPM FRAME PRICE SYMB. AMPS NOTES


Footnotes:92 100% overload capability at maximum constant HP RPM


Applications: For use in process applications such as center winders, payoff and tension reels, uncoilers, recoilers, scrap choppers, and slitters.

Features:

Factory Build-Up MotorsBlue Max® 2000 Wide Constant Horsepower Range Motors2000:1 Constant TorqueTotally Enclosed Blower Cooled (TEBC) or Non-Ventilated (TENV)

• MAX GUARD® Class F Insulation System• Continuous duty at 40º C ambient• 1 minute overload @ 150% of rated

torque below base speed• 125% overload capability to maximum

constant HP RPM

• 1.0 service factor• Class F normally closed thermostats• Ball bearings• UL Recognized and CSA Certified• Three year warranty

Footnotes:92 100% overload capability at maximum constant HP RPM

5 500 2000 256T TENV $2,640 E3 13.57 1/2 500 2000 284T TENV $3,405 E3 19.210 500 2000 326T TENV $5,287 E3 24.015 850 2750 364T TENV $6,194 E3 28.0

650 2600 365T TENV $7,888 E3 34.5500 2000 365T TENV $8,677 E3 41.5

20 850 2750 365T TENV $8,043 E3 37.5650 2600 L365T TENV $8,899 E3 43.5500 2000 L365T TENV $11,569 E3 47.5

25 850 2750 L365T TENV $8,507 E3 45.5650 2600 404T TEBC $9,496 E3 49.5500 2000 404T TEBC $12,115 E3 54.0

30 850 2750 405T TENV $8,714 E3 51.5650 2600 405T TEBC $11,395 E3 58.0500 2000 444T TEBC $14,814 E3 63.0

40 850 2750 444T TEBC $13,583 E3 68.5500 2000 444T TEBC $19,863 E3 85.0

50 850 2750 444T TEBC $16,979 E3 84.5650 2600 444T TEBC $19,099 E3 99.0500 2000 444T TEBC $23,587 E3 105

60 850 2750 444T TEBC $19,355 E3 100650 2600 445T TEBC $20,533 E3 115500 2000 445T TEBC $24,639 E3 125



125 850 2750 449T TEBC $25,741 E3 205650 2600 449T TEBC $30,501 E3 232500 2000 5011L TEBC $51,075 E3 255

150 850 2750 449T TEBC $27,989 E3 245650 2600 5011L TEBC $47,146 E3 285500 2000 5011L TEBC $54,570 E3 305

200 850 2750 5011L TEBC $48,071 E3 330650 2600 5011L TEBC $55,969 E3 380500 2000 5011L TEBC $59,499 E3 405

250 850 2750 5011L TEBC $53,500 E3 405650 2600 5011L TEBC $57,211 E3 470500 2000 5011L TEBC $88,210 E3 540

300 850 2750 5011L TEBC $64,200 E3 485650 2600 5013L TEBC $81,425 E3 585 92500 2000 5013L TEBC $105,853 E3 620 92

350 650 2600 5013L TEBC $94,996 E3 668 92

BASE MAX CHP LIST MULT. BASE RPM FOOTHP RPM RPM FRAME ENCL. PRICE SYMB. AMPS NOTES


Blue Max 2000 Vector Duty - SIECA

Documents

Transcript of Blue Max 2000 Vector Duty - SIECA