BLOOM Statement of Line Lounge Seating and Tables...Bloom Kimball Seating BLOOM® Statement of Line...
Transcript of BLOOM Statement of Line Lounge Seating and Tables...Bloom Kimball Seating BLOOM® Statement of Line...
™
BloomKimball Seating
BLOOM® Statement of Line
Page 10.1
Square Tables➤See page 10.5 to specify.
Magazine End Chat
Height —HPL, Wood, or Solid Surface 171⁄4" 221⁄4" 271⁄4"—TFL or 3D Laminate 171⁄8" 221⁄8" 271⁄8"
Width 36" 24" 30"
Depth 36" 24" 30"
Lounge Seating and Tables
Round Tables➤See page 10.5 to specify.
End Chat
Height —HPL, Wood, or Solid Surface 221⁄4" 271⁄4"
—TFL or 3D Laminate 221⁄8" 271⁄8"
Diameter 24" 30" or 36"
1-Seat LoungeAvailable with clear glides, polishedglides, or with casters.➤See page 10.3 to specify.
Height 33"
Width 30"
Depth 30"
Arm height 22"
Seat height 17"
Seat width 20"
Seat depth 20"
Soft-Rectangular Tables➤See page 10.6 to specify.
Magazine Pull-Up
Height —HPL or Wood 171⁄4" 271⁄4"—Solid Surface 171⁄4" 261⁄2"—TFL or 3D Laminate 171⁄8" 271⁄8"
Width 48" 12"
Depth 24" 16"
Soft-Square Tables➤See page 10.5 to specify.
Magazine End Chat
Height —HPL, Wood, or Solid Surface 171⁄4" 221⁄4" 271⁄4"—TFL or 3D Laminate 171⁄8" 221⁄8" 271⁄8"
Width 36" 24" 30"
Depth 36" 24" 30"
Rectangular or Ellipse Tables➤See page 10.6 to specify.
Magazine
Height —HPL, Wood, or Solid Surface 171⁄4" —TFL or 3D Laminate 171⁄8"
Width 48"
Depth 24"
Price List Effective Dates:Pricing 03.02.20Revision 02.17.20
BloomKimball Seating
Overview Planning
Page 10.2
BLOOM®
Seating & Tables
Statement of Line ➤See page 10.1
Planning page 10.2
Pricing page 10.3
Surface Materials page 10.7
Structural, rigid urethane shell isovermolded with a soft urethane foamand then fully upholstered.
Auto return mechanism on staticmodels allows user to swivel up to90° in either direction (180° motion)and returns to center when the userstands.
Details
Table tops are available in six materials:• TFL table tops are 11⁄8"-thick thermally fused laminate with a 3mm vinyl edgeband (rim).
• 3D laminate tops are 11⁄8" thick andare available with a radius or slopededge profile.
• HPL table tops are 11⁄4"-thickhigh-pressure laminate and can be specified with a 3mm vinyl edge-band (rim) or self edge.
• Wood table tops are 11⁄4" thick witha 3mm wood veneer rim.
• Solid surface tops are 11⁄4"-thick onall shapes, except pull-up which is1⁄2"-thick and made of acrylic solidsurface material.
Four-star fixed base on tables islight-brushed, solid aluminum withclear floor glides. Height of bases:Magazine 16"End 21"Pull-Up 25"Chat-Height 26"
Comfort wrinkles are common withmany upholsteries due to Bloom’sthree-dimensional back and armdesign. This is especially true forleathers, vinyls, and denims. ➤See Bloom Upholstery Guideline atwww.kimball.com/furniture/bloom
Contrasting upholstery may bespecified for the back, seat, andarms.
1 = Back2 = Seat3 = Arms
Four-star base and column aresolid aluminum.
Static base:• Light-brushed aluminum finish• 13mm clear floor glides• Matches table fixed bases
Static base:• Polished aluminum finish• 49mm nylon glides with polishedglide covers
Mobile base:• Polished aluminum finish• 65mm dual-wheel, hard casters• Soft casters for use on hard floorsavailable; upcharge applies.
Kimball Upholstery Price GradeModel 1 or COM 2 3 or COL 4 5 6 7 L7 L8
Static One-Seat Lounges13mm Clear Glides
K781XA $1966 $2084 $2154 $2233 $2343 $2454 $2567 $3036 $3300
49mm Nylon Glides with Polished Covers
K781XARG $1966 $2084 $2154 $2233 $2343 $2454 $2567 $3036 $3300
Mobile One-Seat LoungeK781XASM $1996 $2114 $2184 $2263 $2373 $2484 $2597 $3066 $3330
How to Specify! Model
Back Upholstery:2 Upholstery grade3 Upholstery number
Seat Upholstery:4 Upholstery grade5 Upholstery number
Arm Upholstery:6 Upholstery grade7 Upholstery number
8 Base color: 500 = Light-Brushed Aluminum
(K781XA model only) 497 = Polished Aluminum
(K781XARG or K781XASM only)
9 Glide/caster option: C13 = 13mm clear glides
(K781XA model only) C61 = 49mm nylon glides with
polished cover (K781XARG only) C62 = Hard 65mm black dual
wheel casters (K781XASM only) C63 = Soft 65mm black dual
wheel casters for use on hardfloors (K781XASM only; (+$29)
BloomKimball Seating
Lounge Seating Pricing
Page 10.3
BLOOM®
Seating & TablesGSA SIN 711-18
Statement of Line ➤See page 10.1
Planning page 10.2
Pricing page 10.3
Surface Materials page 10.7with Kimball Upholstery
Contrasting fabric is available. Use an electronic specification tool for accurate pricing.
Due to the inherent characteristicsof certain upholstery materials,loose comfort wrinkles may bepresent or appear over time, espe-cially with non-stretch leathers,vinyls, and upholsteries, such as“denims.”
Due to three dimensional design ofthe back and arms, horizontalstripes are not recommended, asthey will appear wavy across theback as shown above.
➤See page 10.9 for COM/COLyardage requirements.
Alliance Upholstery Price Grade A B C D E F G H IModel J K L M N O P Q R
K781XA $2138 $2223 $2289 $2355 $2425 $2508 $2560 $2649 $2725
2805 2930 3184 3342 3378 3408 3448 3487 3659
K781XARG 2138 2223 2289 2355 2425 2508 2560 2649 2725
2805 2930 3184 3342 3378 3408 3448 3487 3659
K781XASM 2168 2253 2319 2385 2455 2538 2590 2679 2755
2835 2960 3214 3372 3408 3438 3478 3517 3659
How to Specify
For each upholstery grade step inthe model specification, combinethe Alliance partner designator and fabric grade as follows:ARC[grade] = Arc ComCAR[grade] = CarnegieCFS[grade] = CF StinsonLDI[grade] = EnviroLeatherKNL[grade] = KnollTextilesMHM[grade] = MaharamMAF[grade] = Mayer FabricsMOM[grade] = MomentumULT[grade] = Ultrafabrics
➤See the corresponding Kimballupholstery pricing page for complete “How to Specify” steps.
BloomKimball Seating
Lounge Seating Pricing
Page 10.4
BLOOM®
Seating & TablesGSA SIN 711-18
Statement of Line ➤See page 10.1
Planning page 10.2
Pricing page 10.3
Surface Materials page 10.7with Alliance Program Upholstery
IMPORTANT: Orders cannot be cancelled for chairs specified withAlliance Program upholstery.
Due to three dimensional design ofthe back and arms, horizontalstripes are not recommended, asthey will appear wavy across theback as shown on the previouspage.
Due to the inherent characteristicsof certain upholstery materials,loose comfort wrinkles may bepresent or appear over time, espe-cially with non-stretch leathers,vinyls, and upholsteries, such as“denims.”
Contrasting fabric is available. Use an electronic specification tool for accurate pricing.
➤See page 10.9 for COM/COLyardage requirements.
Top Material Solid D W H Model TFL 3D Lam HPL Wood Surface
Square End
24" 24" 22"* K78TS242422 $1013 $1125 $1239 $1351 $1691
Chat
30" 30" 27"* K78TS303027 $1262 $1372 $1482 $1592 $1923
Magazine
36" 36" 17"* K78TS363617 $1464 $1577 $1691 $1803 $2143
Soft-Square End
24" 24" 22"* K78TSSC242422 $1013 $1125 $1239 $1351 $1691
Chat
30" 30" 27"* K78TSSC303027 $1262 $1372 $1482 $1592 $1923
Magazine
36" 36" 17"* K78TSSC363617 $1464 $1577 $1691 $1803 $2143
RoundEnd
24" dia. 22"* K78TRND2422 $1068 $1181 $1295 $1407 $1748
Chat
30" dia. 27"* K78TRND3027 $1316 $1426 $1537 $1647 $1978
36" dia. 27"* K78TRND3627 1589 1699 1810 1921 2253
* Height listed is nominal. Refer to statement of line page for actual height dimensions based on top material.
BloomKimball Seating
Tables Pricing
Page 10.5
BLOOM®
Seating & TablesGSA SIN 711-11Square, Soft-Square, and Round
How to Specify
TFL! Model@ Top and rim material: LL = TFL with vinyl edgeband3 Rim profile:
P = Softened vinyl edgeband4 Surface finish designator5 Rim finish designator
3D Laminate! Model@ Top material and edge profile: TA = 3D lam. with radius edge TSL = 3D lam. with sloped edge3 Surface finish price group
STD = Group 14 Surface finish designator
HPL or Wood! Model@ Top and rim material: L = HPL with vinyl edgeband 2L = HPL with self edge W = Wood with wood rim3 Rim profile: P = Softened vinyl edgeband (L) J = HPL self edge (2L) F = Softened wood rim(W)4 Surface finish price group
STD = Group 1 STD2 = Group 2 (+20%)5 Surface finish designator6 Rim finish designator (include for
P rim only)
Solid Surface! Model@ Top and rim material: SS = Solid surface 3 Rim profile: A = Radius rim S = Knife rim
4 Surface finish designator: 405 = Designer White
Statement of Line ➤See page 10.1
Planning page 10.2
Pricing page 10.3
Surface Materials page 10.7
Top Material Solid D W H Model TFL 3D Lam HPL Wood Surface
Rectangular Magazine
24" 48" 17"* K78TR244817 $1523 $1634 $1862 $1974 $2481
Soft-Rectangular MagazineMagazine
24" 48" 17"* K78TRSC244817 $1523 $1634 $1862 $1974 $2481
Pull-Up
16" 12" 27"* K78TRSC161226 $790 $900 $955 $1010 $1285
EllipseMagazine
24" 48" 17"* K78TE244817 $1634 $1748 $1974 $2088 $2596
* Height listed is nominal. Refer to statement of line page for actual height dimensions based on top material.
BloomKimball Seating
Tables Pricing
Page 10.6
BLOOM®
Seating & TablesGSA SIN 711-11Rectangular and Ellipse
Bloom soft-rectangular pull-uptables will tip more easily thanmagazine or end tables due to their height and width characteristics.
How to Specify
TFL! Model@ Top and rim material: LL = TFL with vinyl edgeband3 Rim profile:
P = Softened vinyl edgeband4 Surface finish designator5 Rim finish designator
3D Laminate! Model@ Top material and edge profile: TA = 3D lam. with radius edge TSL = 3D lam. with sloped edge3 Surface finish price group
STD = Group 14 Surface finish designator
HPL or Wood! Model@ Top and rim material: L = HPL with vinyl edgeband 2L = HPL with self edge W = Wood with wood rim3 Rim profile: P = Softened vinyl edgeband (L) J = HPL self edge (2L) F = Softened wood rim(W)4 Surface finish price group
STD = Group 1 STD2 = Group 2 (+20%)5 Surface finish designator6 Rim finish designator (include for
P rim only)
Solid Surface! Model@ Top and rim material: SS = Solid surface 3 Rim profile: A = Radius rim S = Knife rim (not available onpull-up table)
4 Surface finish designator: 405 = Designer White
Statement of Line ➤See page 10.1
Planning page 10.2
Pricing page 10.3
Surface Materials page 10.7
BloomKimball Seating
Wood Surface Materials
Page 10.7
BLOOM®
Seating & Tables
Statement of Line ➤See page 10.1
Planning page 10.2
Pricing page 10.3
Surface Materials page 10.7
Wood Price Group 1
MC Amber CherryCC Cordoba CherryMH Mocha CherrySC Sedona Cherry
IM Brighton MapleTM Huntington Maple
ES Espresso WalnutMW Midtown WalnutTW Tribeca WalnutUW Urban Walnut
CO Canyon Straight GrainDF Driftwood Straight GrainYO Monterey Straight GrainNW Tuscan Straight Grain
Price Group 2CS Coco SapeleSS Sienna Sapele
CZ Clear Zebrawood
Applies to:• Bloom tables
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of theKimball materials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)overview
• Alliance program • TB133 process
IMPORTANT: Wood finishes appliedto solid hardwood are complementaryto the same wood finish applied towood veneer, but not an exact match.➤Contact Customer Service for moreinformation.
BloomKimball Seating
Page 10.8
BLOOM®
Seating & TablesLaminate and Vinyl Surface Materials
Statement of Line ➤See page 10.1
Planning page 10.2
Pricing page 10.3
Surface Materials page 10.7
HPL, TFL, and Vinyl
3D Laminate
Applies to:• Bloom HPL and TFL table tops • Bloom table top vinyl edgeband
WoodgrainMC Amber CherryCC Cordoba CherryMH Mocha CherrySC Sedona Cherry
IM Brighton MapleTM Huntington Maple
MW Midtown WalnutTW Tribeca WalnutUW Urban Walnut
CO Canyon Straight GrainDF Driftwood Straight Grain YO Monterey Straight GrainNW Tuscan Straight Grain
CZ Clear Zebrawood
Solid480 Antique White403 Chamois462 Cinder440 Cloud485 Dark Chocolate1
405 Designer White450 Fog488 Frosty White461 Graphite416 Putty2
420 Sandstone425 Shadow460 Storm419 Wallaby
1 Available in edgeband only.
2 Available in HPL only.
Applies to:• Bloom table tops
WoodgrainMC Amber CherryMH Mocha Cherry
CO Canyon Straight GrainDF Driftwood Straight GrainYO Monterey Straight GrainNW Tuscan Straight Grain
Solid480 Antique White462 Cinder440 Cloud405 Designer White450 Fog420 Sandstone
Pattern484 Cashmere Fiber466 Concrete Fiber
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of theKimball materials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)overview
• Alliance program • TB133 process
BloomKimball Seating
Upholstery Surface Materials
Page 10.9
BLOOM®
Seating & Tables
Statement of Line ➤See page 10.1
Planning page 10.2
Pricing page 10.3
Surface Materials page 10.7
Upholstery
COM/COL Yardage Requirements
COM COL Non- 1–4" 5–11" 12–18" SquareModel Dir. Repeat Repeat Repeat Feet
K781XA Entire Unit 2.5 3.4 4.6 4.9 47.5 Back 0.9 1.0 2.3 2.5 18.8 Seat 1.0 1.1 1.4 1.5 20.0 Arms 1.4 1.8 2.4 2.8 28.0
Applies to:• Bloom seating
Comfort wrinkles are common withmany upholsteries due to Bloom’sthree-dimensional back and armdesign. This is especially true forleathers, vinyls, and denims. ➤See Bloom Upholstery Guideline atwww.kimball.com/furniture/bloom
Kimball Seating Fabric Price Grades 1–7
➤See the Surface Materials Reference Guide atwww.kimball.com for the most up-to-date list of available seatingfabric patterns.
Kimball Leather Price Grades L7 and L8
➤See the Surface Materials Reference Guide atwww.kimball.com for the most up-to-date list of available seatingleather.
Alliance Fabric Price Grades A–R
➤See Surface Materials at www.kimball.com for a wide varietyof graded-in fabrics from Arc-Com, Carnegie, CF Stinson,EnviroLeather, KnollTextiles,Maharam, Mayer Fabrics,Momentum, and Ultrafabrics.
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of theKimball materials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)process overview
• Alliance program • TB133 process
Kimball has analyzed each model tomost accurately reflect the COM/COLyardage requirements shown at right.The yardage requirement for eachmodel is based on 54"W fabric andcutting the fabric up the roll.
For widths other than 54", increasethe yardage requirement by the factors below:
Fabric width Increase yardage
50"–53" 15%
48"–49" 30%
45"–47" 45%
If repeat is larger than 18”, contactCustomer Service to confirm the correct amount of yardage required.
When ordering 10 or more chairs inthe same COM, yardage require-ments may be reduced. ➤Contact Customer Service.
BloomKimball Seating
Notes Surface Materials
Page 10.10
BLOOM®
Seating & Tables
Statement of Line ➤See page 10.1
Planning page 10.2
Pricing page 10.3
Surface Materials page 10.7