BLOCK RETAINING SYSTEMS
Transcript of BLOCK RETAINING SYSTEMS
Allan Block®SEGMENTAL BLOCK RETAINING SYSTEM
The Allan Block success began three decades ago with the introduction of their patented segmental retaining wall product - the original Allan Block.
The success story continues with the development of creative and innovative construction products, aiming to revolutionise the way the world builds.
Allan Block stacks beautifully and creates a smooth and fluid finish for every wall, bringing a refined look of classic natural beauty to any landscape. It is easy to install, durable, cost-effective and, best of all, it looks great.
Expect high performance with the first ever segmental retaining wall system that has conducted full-scale seismic testing.
IMPORTANT INFORMATION
• Engineering advice should be sought for walls exceeding 900mm, or for retaining walls supporting an additional load, eg. driveways, buildings or slopes etc.
• Also, check with your local council for requirements and regulations in your particular area.
Attractive and durable
Environmentally safe
Construction methodology
Exceptional seismic performance
FEATURES
Easy installation
Patterned retaining walls
Fully engineered
Versatile
TO ORDER SPEAK TO YOUR LOCAL BUILDING SUPPLIES MERCHANT
Retained soilsAB Cap Stones
AB Blocks
DuraForce™ geotextileInfill soils
Toe drain
Drainage metal
StrataGrid® Reinforcement Geogrid
INSTALLATION LAYERS FOR AN ALLAN BLOCK RETAINING WALL
Allan Block® is a registered trademark of Allan Block Corporation registered in the United States. StrataGrid® is a registered trademark of Glen Raven, Inc. Registered in the United States.
AB Ashlar Blend™PATTERNED RETAINING WALL SYSTEM
Give your landscape a dramatic effect with patterned walls. Add a whole new dimension to your landscape! Blend the different sized blocks together into your wall and capture the look of hand-laid stone.
Patterned walls resemble hand-laid stone walls, and will require a certain level of detail and craftsmanship to construct. Some custom fitting of blocks will be required. Plan on taking a little extra time to build, particularly when building one for the first time. AB Junior
AB Junior lIte
AB Lite Stone
AB Classic
Seven full size blocks - approximately 3m
StrataGrid® Reinforcement Geogrid
Base course
CREATE AB ASHLAR BLEND WITH A FOUR BLOCK COMBINATION
Engineering advice should be sought for walls exceeding 900mm, or for retaining walls supporting an additional load, eg. driveways, buildings or slopes etc.
AB Ashlar Blend™ are registered trademarks of Allan Block Corporation registered in the United States. StrataGrid® is a registered trademark of Glen Raven, Inc. Registered in the United States.
AB CLASSICA
AB CAP STONEB
AB JUNIORE
AB END/CORNER BLOCKC
AB JUNIOR LITEF
AB VERTICALD
AB LITE STONEG
Allan Block®
CollectionThe patented Allan Block system is easy to lay, durable, cost effective and best of all, looks great. Bowers Brothers is proud to bring these products to the New Zealand market with local manufacturing and international support.
TO ORDER SPEAK TO YOUR LOCAL BUILDING SUPPLIES MERCHANT
AB CLASSICA
AB JUNIORE
AB LITE STONEG
AB JUNIOR LITEF
A
C
E
B
D
FG
Due to natural variations in aggregates, colour tones may vary from batch to batch.
While these swatches provide a good indication of the products colour, you should always sight product samples before use.
IRON SAND
ROCK SALT
COLOURS OPTIONS
With the combination these four blocks create stunning patterned retaining walls that resemble the aesthetic beauty of hand laid stone.
AB ASHLAR BLEND™
AB Lite StoneCode: 00000
AB VerticalCode: 00000
ALLAN BLOCK
CODE PRODUCT SIZE (L x W x H) AREA BLOCKS SETBACK WEIGHT
Rock Salt Iron Sand (mm) (m2) (per pallet) (from vertical) (Kg) 13573 13574 AB Classic 435 x 300 x 200 11.5 blocks 40 6˚ 32.5 13581 13582 AB Cap Stone 433 x 260 x 100 2.3 blocks/lm 72 N/A 22.5 13583 13584 AB End/Corner Block 400 x 200 x 200 12.5 blocks 60 6˚ 28 13571 13572 AB Vertical 435 x 300 x 200 11.5 blocks 40 3˚ 32.5 13575 13576 AB Junior 216 x 240 x 200 23.15 blocks 100 6˚ 15 13579 13580 AB Junior Lite 216 x 240 x 100 46.3 blocks 200 6˚ 8 13577 13578 AB Lite Stone 435 x 300 x 100 23 blocks 80 6˚ 16
Due to natural variations in aggregates, sizing and weights may vary from batch to batch. Please accept this table as an approximate guide.
Allan Block® and AB Ashlar Blend™ are registered trademarks of Allan Block Corporation registered in the United States.
Rocklok®SEGMENTAL WALL RETAINING SYSTEM
IMPORTANT INFORMATION
• Please consult with your local council for site requirements and regulations before the construction of your wall.
• For retaining walls exceeding 900mm, or supporting additional loads, slopes, etc., engineering advice should be sought. Contact us for advice.
Rocklok Fiberglass Pins*Dimension: 135mm L x 16mm diameter Box: 45 pins per box* Each Rocklok flat block requires two Rocklok fiberglass pins
The Rocklok segmental concrete block retaining wall system has been proudly developed in New Zealand in conjunction with engineers to meet the demands found in this highly seismic region.
Rocklok provides superior strength and performance, with a stronger pin-block connection and trench system, allowing a positive connection between the geogrid and steel reinforcement. This system also allows near vertical walls to be constructed and for high load environments.
Rocklok is a fully engineered system, ideal for bridge abutments, wing walls and large retaining walls. The positive connection system provides extra performance and safety when critical loads are present while still providing an aesthetically attractive finish.
The Rocklok system is designed to work in conjunction with the high-performance StrataGrid® PET geogrids. Together Rocklok and StrataGrid products provide a positive connection using the unique locking trench and bar system. The Rocklok is also designed in conjunction with Cirtex® steel ladder systems for applications where inextensible reinforcement is required such as bridge abutment applications and similar.
StrataGrid® is a registered trademark of Glen Raven, Inc. Registered in the United States.TO ORDER SPEAK TO YOUR LOCAL BUILDING SUPPLIES MERCHANT
FEATURES
100% New Zealand designed and manufactured
Fully engineered and tested
Versatile
Superior strength
Positive geogrid connection available
Flexible and durable
Clean, smart finish
Vertical
Environmentally safe
High seismic performance
StrataGrid® is a registered trademark of Glen Raven, Inc. Registered in the United States.
Rocklok®
Collection
ROCKLOK FLATROCKLOK CORNERROCKLOK CAPROCKLOK FIBREGLASS PIN
A
A
C
C
D
D
B
B
B CA
D
AB Lite StoneCode: 00000
AB VerticalCode: 00000
ROCKLOK
CODE PRODUCT SIZE (L x D x H) AREA BLOCKS SETBACK WEIGHT
Rock Salt Iron Sand (mm) (m2) (per pallet) (from vertical) (Kg) 13589 13588 Rocklok Flat 450 x 300 x 200 11.1 blocks 40 1˚ 39.5 13593 13592 Rocklok Corner 450 x 225 x 200 N/A 40 N/A 38 13591 13590 Rocklok Cap 450 x 300 x 100 2.2 blocks/lm 72 N/A 27.5 13594 Rocklok Fibreglass Pin 435 x 300 x 200 N/A 0 N/A N/A
COLOURS OPTIONS
Choose from our naturally pleasing colours available for your retaining or landscape wall. Other colour options can be made to order.
ROCK SALTIRON SAND
Due to natural variations in aggregates, colour tones may vary from batch to batch.
While these swatches provide a good indication of the products colour, you should always sight product samples before use.
Due to natural variations in aggregates, sizing and weights may vary from batch to batch. Please accept this table as an approximate guide.
TO ORDER SPEAK TO YOUR LOCAL BUILDING SUPPLIES MERCHANT
ComplementaryProducts
TECHNICAL ADVISE & SUPPORT
Bowers Brothers provides technical support for those constructing retaining walls using Allan Block or Rocklok® systems. One of our retaining wall engineers will provide specifications for your project. We can supply preliminary technical drawings for your project, which you can hand over to your engineer for sign-off. We also have software to assist with designs.
For more information visit www.bowersbrothers.co.nz or call us on 0800-207-374.
STRATAGRID®
StrataGrid is a high performance polyester soil reinforcement grid. High strength polyester geogrids are ideally suited to retaining walls, steepened slopes, and embankments subjected to long term creep loads. PET has superior long term creep resistance compared with an HDPE or polypropylene polymer.
DURAFORCE™ AS
DuraForce AS geotextiles are manufactured and tested to exact quality standards and rated according to the NZTA F/7 specification for geotextiles. Due to this manufacturing process DuraForce geotextiles are best used in applications of drainage, filtration and separation.
SLEEVE-IT®
Sleeve-It SD-1 is a pre-engineered fence post anchoring solution for enhancing below-grade foundational stability in fences placed on top of a segmental retaining wall (SRW). Sleeve-It’s design allows stable fence footings to be integrated into the support structure of the SRW while it is being constructed.
Allan Block® is a registered trademark of Allan Block Corporation registered in the United States. StrataGrid® and Sleeve-It® are registered trademarks of Glen Raven, Inc. Registered in the United States.
Allan Block 3D Modeling ToolBRING YOUR PROJECTS TO LIFE!
With technology growing ever more powerful, customers have come to expect more from design professionals and their tools. Project drawings created by hand are a thing of the past; being replaced with computer aided designs. Allan Block is taking the opportunity to take our existing estimating and design tools and extending their reach into three dimensional project drawings.
Now available using the AB Walls Design Software and the AB Retaining Wall Design App!
Contractor CertificationAB Certified Contractors Build More Retaining Walls & Get More Jobs
The Allan Block Contractor Certification Program is designed to give contractors the proper training and tools to ensure top quality retaining walls are built. As a leader in the industry, Allan Block Corporation has developed these tools and training programs to help contractors get the knowledge and the resources they need.
For more information on Allan Block installation, estimating tools and design software visit www.allanblock.co.nz or contact a Bowers representative on 0800-207-374.
BOWERS BROTHERS CONCRETE LTDHead Office 51 Lorne Street | Morrinsville 3300 | NZ
0800-207-374 | WWW.BOWERSBROTHERS.CO.NZ