BLM18HD601SN1
-
Upload
jagadees21 -
Category
Documents
-
view
212 -
download
0
description
Transcript of BLM18HD601SN1
-
1Data Sheet
!Note:1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, its specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise
2011.11.2
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
EMIFILr (Inductor type) Chip Ferrite Bead for GHz Noise
BLM18H Series (0603 Size)c Dimensions
0.40.2
1.60.15 0.80.15
0.8
0.15
(in mm)
: Electrode
c Equivalent Circuit
(Resistance element becomes dominantat high frequencies.)
c PackagingCode Packaging Minimum Quantity
D 180mm Paper Tape 4000J 330mm Paper Tape 10000B Bulk(Bag) 1000
c Rated Value (p: packaging code)
Part NumberImpedance
(at 100MHz/20C)Impedance
(at 1GHz/20C)Rated Current DC Resistance
OperatingTemperature Range
BLM18HG471SN1p 470ohm 25% 600ohm (Typ.) 200mA 0.85ohm max. -55 to +125CBLM18HG601SN1p 600ohm 25% 700ohm (Typ.) 200mA 1.00ohm max. -55 to +125CBLM18HG102SN1p 1000ohm 25% 1000ohm (Typ.) 100mA 1.60ohm max. -55 to +125CBLM18HE601SN1p 600ohm 25% 600ohm (Typ.) 800mA 0.25ohm max. -55 to +125CBLM18HE102SN1p 1000ohm 25% 1000ohm (Typ.) 600mA 0.35ohm max. -55 to +125CBLM18HE152SN1p 1500ohm 25% 1500ohm (Typ.) 500mA 0.50ohm max. -55 to +125CBLM18HD471SN1p 470ohm 25% 1000ohm (Typ.) 100mA 1.20ohm max. -55 to +125CBLM18HD601SN1p 600ohm 25% 1200ohm (Typ.) 100mA 1.50ohm max. -55 to +125CBLM18HD102SN1p 1000ohm 25% 1700ohm (Typ.) 50mA 1.80ohm max. -55 to +125CBLM18HB121SN1p 120ohm 25% 500ohm 40% 200mA 0.50ohm max. -55 to +125CBLM18HB221SN1p 220ohm 25% 1100ohm 40% 100mA 0.80ohm max. -55 to +125CBLM18HB331SN1p 330ohm 25% 1600ohm 40% 50mA 1.20ohm max. -55 to +125CBLM18HK331SN1p 330ohm 25% 400ohm 40% 200mA 0.50ohm max. -55 to +125CBLM18HK471SN1p 470ohm 25% 600ohm 40% 200mA 0.70ohm max. -55 to +125CBLM18HK601SN1p 600ohm 25% 700ohm 40% 100mA 0.90ohm max. -55 to +125CBLM18HK102SN1p 1000ohm 25% 1200ohm 40% 50mA 1.50ohm max. -55 to +125CNumber of Circuits: 1
Continued on the following page.
-
2Data Sheet
!Note:1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, its specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise
2011.11.2
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Derating of Rated CurrentIn operating temperature exceeding +85C, derating of current is necessary for BLM18HE series.Please apply the derating curve shown in chart according to the operating temperature.
Derating of Rated Current
Rat
ed C
urre
nt (m
A)
Operating Temperature (C)125850
400
500
600
800
0
c Impedance-Frequency Characteristics (Main Items)BLM18HG Series
Impe
danc
e (
)
Frequency (MHz)1 10 100 1000 3000
2000
1500
1000
500
0
BLM18HG102SN1
BLM18HG601SN1
BLM18HG471SN1
c Impedance-Frequency Characteristics (Main Items)BLM18HE Series
Impe
danc
e (
)
Frequency (MHz)1 10 100 1000 3000
0
500
1000
1500
2000
2500
BLM18HE152SN1
BLM18HE601SN1
BLM18HE102SN1
c Impedance-Frequency Characteristics (Main Items)BLM18HD Series
Impe
danc
e (
)
Frequency (MHz)1 10 100 1000 3000
0
3000
2000
2500
1500
500
1000
BLM18HD601SN1
BLM18HD471SN1
BLM18HD102SN1
c Impedance-Frequency Characteristics (Main Items)BLM18HB Series
Impe
danc
e (
)
Frequency (MHz)1 10 100 1000 3000
2000
1500
1000
500
0
BLM18HB331SN1
BLM18HB121SN1
BLM18HB221SN1
Continued on the following page.
-
3Data Sheet
!Note:1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, its specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
3Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise
2011.11.2
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Impedance-Frequency Characteristics (Main Items)BLM18HK Series
Impe
danc
e (
)
Frequency (MHz)1 10 100 1000 3000
0
1500
1200
900
600
300
BLM18HK471SN1
BLM18HK331SN1
BLM18HK601SN1
BLM18HK102SN1
c Impedance-Frequency CharacteristicsBLM18HG471SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
1000
750
500
250
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HG601SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
1200
900
600
300
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HG102SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
2000
1500
1000
500
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HE601SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
200
400
600
800
1000
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HE102SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
500
1000
1500
2000
Z
R
X
Continued on the following page.
-
4Data Sheet
!Note:1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, its specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
4Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise
2011.11.2
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Impedance-Frequency CharacteristicsBLM18HE152SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
500
1000
1500
2000
2500
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HD471SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
1600
1200
800
400
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HD601SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
2000
1500
1000
500
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HD102SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
3000
2000
2500
1000
1500
500
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HB121SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
) 750
1000
500
250
0
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HB221SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
1250
1000
750
500
250
0
Z
R
X
Continued on the following page.
-
5Data Sheet
!Note:1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, its specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
5Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise
2011.11.2
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c Impedance-Frequency CharacteristicsBLM18HB331SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
1800
1500
1200
900
300
600
0
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HK331SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
600
450
300
150
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HK471SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
750
600
450
300
150
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HK601SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
1000
600
800
400
200
Z
R
X
c Impedance-Frequency CharacteristicsBLM18HK102SN1
1 10 100 1000 3000Frequency (MHz)
Impe
danc
e (
)
0
1500
1250
750
1000
250
500
Z
R
X
Continued on the following page.
-
6Data Sheet
!Note:1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, its specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
6Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise
2011.11.2
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
Continued from the preceding page.
c !Caution/Notice!Caution (Rating)
Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance.
NoticeSolderability of Tin plating termination chip might bedeteriorated when low temperature soldering profi lewhere peak solder temperature is below the Tin meltingpoint is used. Please confi rm the solderability of Tinplating termination chip before use.