Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

26
Blender 2.5 Interface

Transcript of Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Page 1: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Blender 2.5 Interface

Page 2: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

The Blender Interface

Page 3: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Penggunaan Mouse

Page 4: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Changing the View

Page 5: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

The View menu, showing view shortcuts

Page 6: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

REDUCING THE CLUTTER

Page 7: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Splitting the Screen

To split a screen, position your mouse over this corner (when the mouse pointer changes to a cross, you are in the right position), hold down the LMB, and drag toward the center of the window (e.g., if you are using the top-right corner, drag either left or down; if youare using the bottom-left corner, drag up or to the right).

Page 8: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Multiple-View Setup

Page 9: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Blender Window Conventions

Page 10: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Adding New Objects

The Cursor

Page 11: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Basic Operation

Page 12: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Moving Objects

Page 13: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Moving Objects

Moving the object is easy. Simply hold the LMB on one of the arrows and drag in the direction you wish the cube to move. Notice that you can only move the cube parallel to the arrow you are pulling. You can drag in all directions by LMB-dragging the circle where the manipulator arrows meet.

The shortcut key G (for “grab”) can be used to drag a selected object

Page 14: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Rotating Objects

Now that you can move an object, follow these steps to rotate it:

1. Place your mouse near the edge of the object.

2. Press the R key once.

3. Move the mouse around the object in circles to watch it rotate.

4. LMB-click to release the object in place, or press Esc to cancel.

5. If you press R twice, however, the rotation changes to trackball mode.

Normal rotation (left) and trackball rotation (right)

Page 15: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Changing the Manipulator Arrows

Page 16: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

The Difference Between Global and Local

The difference is that with global coordinates, the x, y, and z directions are given in terms of world space. This means that z is always up, no matter which way an object is rotated.

However, in local coordinates, z is up only in terms of the object itself.

Page 17: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Scaling Objects

Select the cube (RMB-click it).

1. Place the mouse pointer near the edge of the cube.

2. Press S.

3. Draw the mouse pointer away from the cube (do not hold any mouse buttons) to enlarge it.

4. LMB-click to finalize the scale operation or press Esc to cancel.

5. Experiment with the same principles that you did with rotation. Look at what happens when you press the X key while scaling (it expands in global X direction).

Page 18: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Property Panel

Page 19: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Using Numbers

Page 20: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Layers

To move an object to a different layer, RMB-select the object and then press the M key. The Move to Layer dialog will appear (see Figure 2–25), allowing you to select the layer(s) on which you wish the selected object to appear.

Again, you can use the Shift key to specify multiple layers. This is helpful when you want several objects to have their own layers, and also when you want to set up a final “view all” layer, where they are all present.

Page 21: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Undoing Things

Page 22: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Undoing Things

This is all very well, but what if you want to change an object’s rested position? For example, you might want the rested position to be 45 degrees diagonal, or the default shape to be taller. The solution is to make the change to the object, and then lock it in its new positioning by selecting Object Apply ➤ ➤Location/Rotation/Scale (depending on which you want to preserve) from the bottom menu. From then on, your object will reset to the new position.

Page 23: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Saving Your Work To save your work, go to File Save or File ➤ ➤

Save As.

Page 24: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Useful Keyboard Shortcuts

Page 25: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.

Exercises - The Ten-Cube Challenge

Page 26: Blender 2.5 Interface. The Blender Interface Penggunaan Mouse.