Oilless, Single Stage, Direct Drive, Electric Air Compressor
BLACK series - Sankyo-Oilless€¦ · 585 586 Cam Units Gas Spring Coil Spring :Make sure to check...
Transcript of BLACK series - Sankyo-Oilless€¦ · 585 586 Cam Units Gas Spring Coil Spring :Make sure to check...
Introducing
BLACK seriesThe High Tensile Aerial Cam
586585
®
Cam
Unit
s
Gas Spring Coil Spring :Make sure to check your conditions of use
Technical OverviewAERIAL CAM UNIT
tThe mounting surface widths of 46, 58, 72, 100, and 140 mm are available.
tThe white grade, which emphasizes compactness, and three compatible grades are available. The working force can be increased in the same form. (Two types of grades are available for mounting surface widths of 100 and 140.)
tThanks to the design that used CAE analysis and in-house testing to reduce stress concentration, these models are lighter weight and more rigid and can handle high-speed production.
tFor mounting surface widths of 46, 58, and 72 mm, there are two stroke types, long and short. (One stroke type is available for mounting surface widths of 100 and 140 mm.)
tTwo types of pressure source, coil spring and gas spring are available. The gas spring types secure a spring force more than 10% of the working force and can even handle high tensile strength steel sheets.
tDepending on the grade, use with triming and flanging is possible.
tV-shaped guide structure.
®Features of
Durability test CAE analysis
Interchangeability
GradeCam width[mm]
Working force [ kN (tonf) ]Stroke
Angle(5-degree
increments)
CatalogNo.
SpringType
Application Page1,000,000strokes
Standard
1,000,000strokesCenter
300,000strokesCenter
46 14.7 (1.5)
22.1(2.2)
29.4(3.0)
Short 0˚n80˚ VACWS46 P.595n613
Long 0˚n50˚ VACWL46 P.615n627
58 18.6 (1.9)
27.9(2.8)
37.2(3.8)
Short 0˚n80˚ VACWS58 P.663n681
Long 0˚n50˚ VACWL58 P.683n695
46 14.7 (1.5)
22.1(2.2)
29.4(3.0)
Short 0˚n80˚ VACSS46 P.629n647
Long 0˚n50˚ VACSL46 P.649n661
58 18.6 (1.9)
27.9(2.8)
37.2(3.8)
Short 0˚n80˚ VACSS58 P.697n715
Long 0˚n50˚ VACSL58 P.717n729
72 24.5 (2.5)
36.8(3.7)
49.0(5.0)
Short 0˚n80˚ VACSS72 P.731n749
Long 0˚n50˚ VACSL72 P.751n763
46 20.6 (2.1)
30.9(3.1)
41.2(4.2)
Short 0˚n80˚ VACYS46 P.629n647
Long 0˚n50˚ VACYL46 P.649n661
58 28.4 (2.9)
42.6(4.3)
56.8(5.8)
Short 0˚n80˚ VACYS58 P.697n715
Long 0˚n50˚ VACYL58 P.717n729
72 40.2 (4.1)
60.3(6.1)
80.4(8.2)
Short 0˚n80˚ VACYS72 P.731n749
Long 0˚n50˚ VACYL72 P.751n763
100 57.8 (5.9)
86.7(8.8)
103.9(10.6) Long 0˚n70˚ VACYL100 P.765n781
140 90.2 (9.2)
112.8(11.5)
135.3(13.8) Long 0˚n70˚ VACYL140 P.783n799
46 24.5 (2.5)
36.8(3.7)
49.0 (5.0)
Short 0˚n80˚ VACPS46 P.629n647
Long 0˚n50˚ VACPL46 P.649n661
58 34.3 (3.5)
51.5(5.2)
68.6 (7.0)
Short 0˚n80˚ VACPS58 P.697n715
Long 0˚n50˚ VACPL58 P.717n729
72 45.1 (4.6)
67.7(6.9)
90.2 (9.2)
Short 0˚n80˚ VACPS72 P.731n749
Long 0˚n50˚ VACPL72 P.751n763
100 77.4 (7.9)
116.1(11.8)
139.2(14.2) Long 0˚n70˚ VACPL100 P.765n781
140 127.4(13.0)
159.3(16.3)
191.1(19.5) Long 0˚n70˚ VACPL140 P.783n799
46 36.8(3.7)
49.0(5.0)
oShort 0˚n80˚ VACBS46 P.629n647
Long 0˚n50˚ VACBL46 P.649n661
58 51.5(5.2)
68.6(7.0)
oShort 0˚n80˚ VACBS58 P.697n715
Long 0˚n50˚ VACBL58 P.717n729
72 67.7(6.9)
90.2(9.2)
oShort 0˚n80˚ VACBS72 P.731n749
Long 0˚n50˚ VACBL72 P.751n763
White
Sky
Yellow
Pink
Black
Pierce
Pierce
Pierce
Pierce
Trim
Trim
Trim
Flange
Flange
Flange
Pierce
0585-0662-46-valcam-eng.indd 585-586 2016/06/08 9:27
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
586585
®
Cam
Unit
s
Gas Spring Coil Spring :Make sure to check your conditions of use
Technical OverviewAERIAL CAM UNIT
tThe mounting surface widths of 46, 58, 72, 100, and 140 mm are available.
tThe white grade, which emphasizes compactness, and three compatible grades are available. The working force can be increased in the same form. (Two types of grades are available for mounting surface widths of 100 and 140.)
tThanks to the design that used CAE analysis and in-house testing to reduce stress concentration, these models are lighter weight and more rigid and can handle high-speed production.
tFor mounting surface widths of 46, 58, and 72 mm, there are two stroke types, long and short. (One stroke type is available for mounting surface widths of 100 and 140 mm.)
tTwo types of pressure source, coil spring and gas spring are available. The gas spring types secure a spring force more than 10% of the working force and can even handle high tensile strength steel sheets.
tDepending on the grade, use with triming and flanging is possible.
tV-shaped guide structure.
®Features of
Durability test CAE analysis
Interchangeability
GradeCam width[mm]
Working force [ kN (tonf) ]Stroke
Angle(5-degree
increments)
CatalogNo.
SpringType
Application Page1,000,000strokes
Standard
1,000,000strokesCenter
300,000strokesCenter
46 14.7 (1.5)
22.1(2.2)
29.4(3.0)
Short 0˚n80˚ VACWS46 P.595n613
Long 0˚n50˚ VACWL46 P.615n627
58 18.6 (1.9)
27.9(2.8)
37.2(3.8)
Short 0˚n80˚ VACWS58 P.663n681
Long 0˚n50˚ VACWL58 P.683n695
46 14.7 (1.5)
22.1(2.2)
29.4(3.0)
Short 0˚n80˚ VACSS46 P.629n647
Long 0˚n50˚ VACSL46 P.649n661
58 18.6 (1.9)
27.9(2.8)
37.2(3.8)
Short 0˚n80˚ VACSS58 P.697n715
Long 0˚n50˚ VACSL58 P.717n729
72 24.5 (2.5)
36.8(3.7)
49.0(5.0)
Short 0˚n80˚ VACSS72 P.731n749
Long 0˚n50˚ VACSL72 P.751n763
46 20.6 (2.1)
30.9(3.1)
41.2(4.2)
Short 0˚n80˚ VACYS46 P.629n647
Long 0˚n50˚ VACYL46 P.649n661
58 28.4 (2.9)
42.6(4.3)
56.8(5.8)
Short 0˚n80˚ VACYS58 P.697n715
Long 0˚n50˚ VACYL58 P.717n729
72 40.2 (4.1)
60.3(6.1)
80.4(8.2)
Short 0˚n80˚ VACYS72 P.731n749
Long 0˚n50˚ VACYL72 P.751n763
100 57.8 (5.9)
86.7(8.8)
103.9(10.6) Long 0˚n70˚ VACYL100 P.765n781
140 90.2 (9.2)
112.8(11.5)
135.3(13.8) Long 0˚n70˚ VACYL140 P.783n799
46 24.5 (2.5)
36.8(3.7)
49.0 (5.0)
Short 0˚n80˚ VACPS46 P.629n647
Long 0˚n50˚ VACPL46 P.649n661
58 34.3 (3.5)
51.5(5.2)
68.6 (7.0)
Short 0˚n80˚ VACPS58 P.697n715
Long 0˚n50˚ VACPL58 P.717n729
72 45.1 (4.6)
67.7(6.9)
90.2 (9.2)
Short 0˚n80˚ VACPS72 P.731n749
Long 0˚n50˚ VACPL72 P.751n763
100 77.4 (7.9)
116.1(11.8)
139.2(14.2) Long 0˚n70˚ VACPL100 P.765n781
140 127.4(13.0)
159.3(16.3)
191.1(19.5) Long 0˚n70˚ VACPL140 P.783n799
46 36.8(3.7)
49.0(5.0)
oShort 0˚n80˚ VACBS46 P.629n647
Long 0˚n50˚ VACBL46 P.649n661
58 51.5(5.2)
68.6(7.0)
oShort 0˚n80˚ VACBS58 P.697n715
Long 0˚n50˚ VACBL58 P.717n729
72 67.7(6.9)
90.2(9.2)
oShort 0˚n80˚ VACBS72 P.731n749
Long 0˚n50˚ VACBL72 P.751n763
White
Sky
Yellow
Pink
Black
Pierce
Pierce
Pierce
Pierce
Trim
Trim
Trim
Flange
Flange
Flange
Pierce
0585-0662-46-valcam-eng.indd 585-586 2016/06/08 9:27
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
44244 Phoenix Drive, Sterling Heights, MI 48314Tel. (586) 254-3100 • Fax (586) 254-3204
E-mail: [email protected] • Web: www.sankyo-oilless.com
586585
®
Cam
Unit
s
Gas Spring Coil Spring :Make sure to check your conditions of use
Technical OverviewAERIAL CAM UNIT
tThe mounting surface widths of 46, 58, 72, 100, and 140 mm are available.
tThe white grade, which emphasizes compactness, and three compatible grades are available. The working force can be increased in the same form. (Two types of grades are available for mounting surface widths of 100 and 140.)
tThanks to the design that used CAE analysis and in-house testing to reduce stress concentration, these models are lighter weight and more rigid and can handle high-speed production.
tFor mounting surface widths of 46, 58, and 72 mm, there are two stroke types, long and short. (One stroke type is available for mounting surface widths of 100 and 140 mm.)
tTwo types of pressure source, coil spring and gas spring are available. The gas spring types secure a spring force more than 10% of the working force and can even handle high tensile strength steel sheets.
tDepending on the grade, use with triming and flanging is possible.
tV-shaped guide structure.
®Features of
Durability test CAE analysis
Interchangeability
GradeCam width[mm]
Working force [ kN (tonf) ]Stroke
Angle(5-degree
increments)
CatalogNo.
SpringType
Application Page1,000,000strokes
Standard
1,000,000strokesCenter
300,000strokesCenter
46 14.7 (1.5)
22.1(2.2)
29.4(3.0)
Short 0˚n80˚ VACWS46 P.595n613
Long 0˚n50˚ VACWL46 P.615n627
58 18.6 (1.9)
27.9(2.8)
37.2(3.8)
Short 0˚n80˚ VACWS58 P.663n681
Long 0˚n50˚ VACWL58 P.683n695
46 14.7 (1.5)
22.1(2.2)
29.4(3.0)
Short 0˚n80˚ VACSS46 P.629n647
Long 0˚n50˚ VACSL46 P.649n661
58 18.6 (1.9)
27.9(2.8)
37.2(3.8)
Short 0˚n80˚ VACSS58 P.697n715
Long 0˚n50˚ VACSL58 P.717n729
72 24.5 (2.5)
36.8(3.7)
49.0(5.0)
Short 0˚n80˚ VACSS72 P.731n749
Long 0˚n50˚ VACSL72 P.751n763
46 20.6 (2.1)
30.9(3.1)
41.2(4.2)
Short 0˚n80˚ VACYS46 P.629n647
Long 0˚n50˚ VACYL46 P.649n661
58 28.4 (2.9)
42.6(4.3)
56.8(5.8)
Short 0˚n80˚ VACYS58 P.697n715
Long 0˚n50˚ VACYL58 P.717n729
72 40.2 (4.1)
60.3(6.1)
80.4(8.2)
Short 0˚n80˚ VACYS72 P.731n749
Long 0˚n50˚ VACYL72 P.751n763
100 57.8 (5.9)
86.7(8.8)
103.9(10.6) Long 0˚n70˚ VACYL100 P.765n781
140 90.2 (9.2)
112.8(11.5)
135.3(13.8) Long 0˚n70˚ VACYL140 P.783n799
46 24.5 (2.5)
36.8(3.7)
49.0 (5.0)
Short 0˚n80˚ VACPS46 P.629n647
Long 0˚n50˚ VACPL46 P.649n661
58 34.3 (3.5)
51.5(5.2)
68.6 (7.0)
Short 0˚n80˚ VACPS58 P.697n715
Long 0˚n50˚ VACPL58 P.717n729
72 45.1 (4.6)
67.7(6.9)
90.2 (9.2)
Short 0˚n80˚ VACPS72 P.731n749
Long 0˚n50˚ VACPL72 P.751n763
100 77.4 (7.9)
116.1(11.8)
139.2(14.2) Long 0˚n70˚ VACPL100 P.765n781
140 127.4(13.0)
159.3(16.3)
191.1(19.5) Long 0˚n70˚ VACPL140 P.783n799
46 36.8(3.7)
49.0(5.0)
oShort 0˚n80˚ VACBS46 P.629n647
Long 0˚n50˚ VACBL46 P.649n661
58 51.5(5.2)
68.6(7.0)
oShort 0˚n80˚ VACBS58 P.697n715
Long 0˚n50˚ VACBL58 P.717n729
72 67.7(6.9)
90.2(9.2)
oShort 0˚n80˚ VACBS72 P.731n749
Long 0˚n50˚ VACBL72 P.751n763
White
Sky
Yellow
Pink
Black
Pierce
Pierce
Pierce
Pierce
Trim
Trim
Trim
Flange
Flange
Flange
Pierce
0585-0662-46-valcam-eng.indd 585-586 2016/06/08 9:27
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
Features of • 46, 58, 72, 100, 140mm aerial cam widths available.• Offered in short and long stroke models.• CAE analysis and duration tested. VALCAM is rigid and can handle high-speed production, (servo presses).• Standard coil or nitrogen return spring models available.• Pierce,trim,form,orflangeoperations.• Compact design helps reduce the die size.• V-shaped guidance for positive alignment.• Interchangeability between different series if more force is required.• Heavy Duty, High Volume, Compact
New
®Technical Overview
AERIAL CAM UNIT
586585
®
Cam
Uni
ts
Gas Spring Coil Spring :Make sure to check your conditions of use
Technical OverviewAERIAL CAM UNIT
tThe mounting surface widths of 46, 58, 72, 100, and 140 mm are available.
tThe white grade, which emphasizes compactness, andthree compatible grades are available. The working force can be increased in the same form. (Two types of grades are available for mounting surface widths of 100 and 140.)
tThanks to the design that used CAE analysis and in-house testing to reduce stress concentration, these models arelighter weight and more rigid and can handle high-speedproduction.
tFor mounting surface widths of 46, 58, and 72 mm, there are two stroke types, long and short. (One stroke type is available for mounting surface widths of 100 and 140 mm.)
tTwo types of pressure source, coil spring and gas springare available. The gas spring types secure a spring force more than 10% of the working force and can even handle high tensile strength steel sheets.
tDepending on the grade, use with triming and flanging ispossible.
tV-shaped guide structure.
®Features of
Durability test CAE analysis
Interchangeability
GradeCam width[mm]
Working force [ kN (tonf) ]Stroke
Angle(5-degree
increments)
CatalogNo.
SpringType
Application Page1,000,000strokes
Standard
1,000,000strokesCenter
300,000strokesCenter
46 14.7 (1.5)
22.1(2.2)
29.4(3.0)
Short 0˚n80˚ VACWS46 P.595n613
Long 0˚n50˚ VACWL46 P.615n627
58 18.6 (1.9)
27.9(2.8)
37.2(3.8)
Short 0˚n80˚ VACWS58 P.663n681
Long 0˚n50˚ VACWL58 P.683n695
46 14.7 (1.5)
22.1(2.2)
29.4(3.0)
Short 0˚n80˚ VACSS46 P.629n647
Long 0˚n50˚ VACSL46 P.649n661
58 18.6 (1.9)
27.9(2.8)
37.2(3.8)
Short 0˚n80˚ VACSS58 P.697n715
Long 0˚n50˚ VACSL58 P.717n729
72 24.5 (2.5)
36.8(3.7)
49.0(5.0)
Short 0˚n80˚ VACSS72 P.731n749
Long 0˚n50˚ VACSL72 P.751n763
46 20.6 (2.1)
30.9(3.1)
41.2(4.2)
Short 0˚n80˚ VACYS46 P.629n647
Long 0˚n50˚ VACYL46 P.649n661
58 28.4 (2.9)
42.6(4.3)
56.8(5.8)
Short 0˚n80˚ VACYS58 P.697n715
Long 0˚n50˚ VACYL58 P.717n729
72 40.2 (4.1)
60.3(6.1)
80.4(8.2)
Short 0˚n80˚ VACYS72 P.731n749
Long 0˚n50˚ VACYL72 P.751n763
100 57.8 (5.9)
86.7(8.8)
103.9(10.6) Long 0˚n70˚ VACYL100 P.765n781
140 90.2 (9.2)
112.8(11.5)
135.3(13.8) Long 0˚n70˚ VACYL140 P.783n799
46 24.5 (2.5)
36.8(3.7)
49.0 (5.0)
Short 0˚n80˚ VACPS46 P.629n647
Long 0˚n50˚ VACPL46 P.649n661
58 34.3 (3.5)
51.5(5.2)
68.6 (7.0)
Short 0˚n80˚ VACPS58 P.697n715
Long 0˚n50˚ VACPL58 P.717n729
72 45.1 (4.6)
67.7(6.9)
90.2 (9.2)
Short 0˚n80˚ VACPS72 P.731n749
Long 0˚n50˚ VACPL72 P.751n763
100 77.4 (7.9)
116.1(11.8)
139.2(14.2) Long 0˚n70˚ VACPL100 P.765n781
140 127.4(13.0)
159.3(16.3)
191.1(19.5) Long 0˚n70˚ VACPL140 P.783n799
46 36.8(3.7)
49.0(5.0)
oShort 0˚n80˚ VACBS46 P.629n647
Long 0˚n50˚ VACBL46 P.649n661
58 51.5(5.2)
68.6(7.0)
oShort 0˚n80˚ VACBS58 P.697n715
Long 0˚n50˚ VACBL58 P.717n729
72 67.7(6.9)
90.2(9.2)
oShort 0˚n80˚ VACBS72 P.731n749
Long 0˚n50˚ VACBL72 P.751n763
White
Sky
Yellow
Pink
Black
Pierce
Pierce
Pierce
Pierce
Trim
Trim
Trim
Flange
Flange
Flange
Pierce
0585-0662-46-valcam-eng.indd 585-586 2016/06/08 9:27
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. New
www.sankyo-oilless.com