BLACK FPM FKM SHEET PRODUCT - J-Flex · Thermogravimetrie nach ISO 11358-1 I thermogravimetric...
Transcript of BLACK FPM FKM SHEET PRODUCT - J-Flex · Thermogravimetrie nach ISO 11358-1 I thermogravimetric...
Material Data Sheet
Units 1 & 2, London Road Business Park, Retford, Nottinghamshire, DN22 6HG, United Kingdom tel: +44 (0) 1777 712400 fax: +44 (0) 1777 712409 email: [email protected] web: www.j-flex.com
J-Flex is the trading name of Clockpress Ltd - Registered in England & Wales No.02448048. Issue!21!!! Date!Kvmz!312:
Innovative Rubber Solutions
PROPERTY
TEST RESULTS
TEST METHOD Type
‘A’ Type FPM/FKM
ISO 1629
Hardness
75 (+/-5) Shore ‘A’
ISO 7619-1
Specific Gravity / Density
1.84 g/cm3
ISO 1183/2781
Tensile Strength
7 N/mm2
ISO 37
Elongation @ Break
> 200%
ISO 37
Tear Strength
4.2 N/mm
ISO 34-1, A
Compression Set: - Test Condition: 24hrs @200˚C - Compression Rate: 25%
36%
ISO 815-1:2016
Method ‘A’
Temperature Resistance
-15°C to +250°C
Information provided as a Guideline
Features: * FPM / FKM 68% Fluorine Content
* Bisphenol Cured
* Post Cured
* Applicable to +275°C for a short time
Available in thicknesses: 0.5mm to 25mm 0.5mm to 6mm - Rolls: 1200mm wide x 10m long 8mm & 10mm - Rolls: 1200mm wide x 5m long
Over 10mm thick – plates: 2000mm x 1000mm
FLUOR-A-COM® is a Registered Trade Mark of J-Flex See official Test Report attached
BLACK FPM / FKM SHEET PRODUCT
PAH / PAK COMPLIANT
140817063 Istwerte / actual values
Prüfplatte / test slab
2mm FKM
Härte/ hardness Anlieferung I as received condition 72 Shore A
Dichte / density 1,84 g/cm³
Zugversuch nach DIN 53 504 I tensile test acc. to DIN 53 504
Reiẞfestigkeit / tensile strength Anlieferung I as receivedcondition 7,4 N/mm²
Reiẞdehnung I elongation at break Anlieferung I as receivedcondition 218 %
Spannungswert bei 100% Dehnung I stress at 100% elongation
Anlieferung I as received condition 3,5 N/mm²
Weitereiẞwiderstand nach ISO 34-1 I tear strength acc. to ISO 34-1
Weiterreiẞwiderstand I tear strength Anlieferung I as received condition
4,2 N/mm
flüchtige Bestandteilevolatiles
1,7 %
pyrolysierbare Bestandteile pyrolyzable ingredients
63,1 %
oxidierbare Bestandteileoxidizable ingredients 17,3 %
anorganischer Rest inorganic rest
Ascherest residual 17,9 %
Druckverformungsrestprüfung Verf. A nach DIN ISO 815-1 I compression set method Aacc. to DIN ISO 815-1
DVR / CS 23h / 100°C 21 %
DVR / CS 24h / 150°C 21 %
DVR / CS 24h / 200°C 36 %
DVR / CS
24h / 250°C 71
%
DVR / CS
24h / 275°C 92 %
DVR / CS
168h / 200°C 66 %
DVR / CS
168h / 275°C 115 %
Volumenäderung change of volume
künstliche Alterung accelerated ageing 168h / 250°C
-12,2 %
Masseänderung change of weight - 8,1 %
Härteänderung change of hardness 10 Shore A
Reiẞfestigkeit
tensile strength 8,3
N/mm²
Ӓnderung der Reiẞfestigkeit
change of tensile strength 13
%
Reiẞdehnung
elongation at break 166
%
Ӓnderung der Reiẞdehnung
change of elongation at break -24
%
Spannungswert bei 100% Dehnung
stress at 100% elongation 5,9
N/mm²
Ӓnderung des Spannungswertes bei
100% Dehnung
change of stress at 100% elongation 70
%
Anlieferung I as receivedcondition
Thermogravimetrie nach ISO 11358-1 I thermogravimetric
analysis acc. to
ISO 11358-1
künstliche Alterung nach DIN 53 508 I accelerated ageing acc. to DIN 53 508 168h / 250°C
Test completed by O-Ring Prüflabor Richter GmbH - 31.08.2017
Certificate No. RS 27920 Approved to BS EN ISO 9001:2015
Volumenänderungchange of volume
Masseänderung change of weight
Härteänderung change of hardness
-20,6 %
-16,6
%
17
Shore A
Reißfestigkeit 6,2
N/mm²
tensile strength
Änderung der Reißfestigkeit künstilche Alterung -17 %
change of tensile strength accelerated ageing Reißdehnung
168h / 275°C 91
% elongation at break
Änderung der Reißdehnung
-58
% change of elongation at break
Spannungswert bei 100% Dehnung stress at 100% elongation -
Ӓnderung des Spannungswertes bei
N/mm²
100% Dehnung - %change of stress
at 100% elongation
Volumenänderung -1,2 % change of volume Masseänderung change of weight
Härteänderung change of hardness
-0,6 %
2 Shore A
Reißfestigkeit 7,8 N/mm² tensile strength
Änderung der Reißfestigkeit change of tensile strength
5 %
Reißdehnung
IRM ÖI 901
elongation at break
IRM oil 901 227
%
Änderung der
Reißdehnung
change of elongation at break
Spannungswert bei 100% Dehnung stress at 100%
Ӓnderung des Spannungswertes bei 100% Dehnung
change of stress at 100% elongation
4
%
3,6
N/mm²
3 %
0°C
Volumenänderung 0,7 %
change of volume
Masseänderung
change of weight
Härteänderung change of hardness Reißfestigkeit tensile strength
0,3 %
1 IRHD
7,6
N/mm²
Ӓnderung der Reißfestigkeit3 %
change of tensile strength
IRM ÖI 903 IRM oil 903
Reißdehnung
72h / 100°C
72h / 100°C
233 %
elongation at break
Änderung der Reißdehnung
change of elongation at break 7 %
Spannungswert bei100% Dehnung 3,3 N/mm²
stress at 100% elongation
Änderung des Spannungswertes bei 100% Dehunung -4
%
change of stress at 100% elongation
140817063 Istwerte / actual values
Prüfplatte / test slab 2mm FKM
künstliche Alterung nach DIN 53 508 I accelerated ageing acc. to DIN 53 508 168h / 250°C
IRM ÖI 901 nach DIN ISO 1817 / IRM oil 901 acc. to DIN ISO 1817 72h / 100°C
IRM ÖI 903 nach DIN ISO 1817 / IRM oil 903 acc. to DIN ISO 1817 72h / 100°C
Volumenänderungchange of volume
Masseänderung change of weight
Härteänderung change of hardness
9.0
%
4.0
%
- 6
Shore A
Reißfestigkeit 5,2
N/mm²
tensile strength
Änderung der ReißfestigkeitFAM A -2 9
change of tensile strength Reißdehnung
24h / 23°C
19 0
% elongation at break
Änderung der Reißdehnung -1 3 % change of elongation at break
Spannungswert bei 100% Dehnung
stress at 100% elongation 2.7
Ӓnderung des Spannungswertes bei
N/mm²
100% Dehnung -22 %
%
change of stress at 100% elongation
Volumenänderung 2 3 , 9 % change of volume
Masseänderung change of weight
Härteänderung change of hardness
1 0 , 3 %
- 1 6 Shore A
Reißfestigkeit 3, 5 N/mm² tensile strength
Änderung der Reißfestigkeit change of tensile strength
- 5 3 %
Reißdehnung
FAM B
elongation at break
147
%
Änderung
der
Reißdehnung
change of elongation at break
Spannungswert bei 100% Dehnung stress at 100% elongation
Ӓnderung des Spannungswertes bei 100% Dehnung
change of stress at 100% elongation
-33
3
%
2 , 3
N/mm²
- 3 %
0°C S
Durchgangswiderstand 29,7 E+09
Volume resistancespezifischer Durchgangswiderstand
Volume resistivity
Oberflächenwiderstand Surface resistance
spezifischer Oberflächenwiderstand
Surface resistivity
3717 E+09
537,2 E+09
18566 E+09
24h / 23°C
140817063 Istwerte / actual values
Prüfplatte / test slab 2mm FKM
FAM A nach DIN ISO 1817 / acc. to DIN ISO 1817 24h / 23°C
FAM B nach DIN ISO 1817 acc. to DIN ISO 1817 24h / 23°C
spezifischer Durchgangswiderstand / spezifischer Oberflächernwiderstand DIN IEC 60093 volume resistivity and surface resistivity DIN IEC 60093
( )RD Ω
σ ( )Ω
( ) RO
( xcm)ρ
Ω
Ω
Units 1 & 2, London Road Business Park, Retford, Nottinghamshire, DN22 6HG, United Kingdom tel: +44 (0) 1777 712400 fax: +44 (0) 1777 712409 email: [email protected] web: www.j-flex.com
J-Flex is the trading name of Clockpress Ltd - Registered in England & Wales No.02448048. Issue!21!!! Date!Kvmz!312:
Innovative Rubber Solutions