BKL 2009 NEW
-
Upload
moni-sanker -
Category
Documents
-
view
252 -
download
8
Transcript of BKL 2009 NEW
BEXTEX
Project description
Name : BEXIMCO KNITTING LIMITED (Dyeing section)
Type : KNIT DYEING.
Year of establishment: 1996 Location : Beximco industrial park,
Chokroborty, (5 km north from DEPZ).
Address : Corporate Headquarter: 17, Dhanmondi, R/A, Road no. 2,Dhaka-1205
Operational Headquarter & Factory : Beximco Knitting Limited, Beximco industrial park, Sarabo, Kashimpur, Gazipur.
Sponsors : World Bank, Marubeni.
Fig: Location of BEXIMCO KNITTING LTD.
DEPZ
DEPZBipile
Nobinagar
Chakraborti
Beximco Industrial Park
Abdullahpur
Savar Ashulia
College of Textile
Technology
National Assembly
Mir
pur
Roa
d
Farmgate
J. U.
Asad gate
Mirpur
Gabtoli
Tongi
Uttara
New Air port
Old Air portPrime Minister’s House
Dha
ka M
ymen
sing
Roa
d
Mohakhali
Sat Rasta
Physical Infrastructure : - Single storied building (only dye warehouse is double storied )
- Concrete structure (about 30 ft high)
Different dept : A) Production oriented department - Production Planning and control
-Knitting - Batch preparation -Dyeing -Finishing
- Lab& Quality assurance - Dye warehouse
- Maintenance- Utilty- Finished warehouse
B) Supporting department- personnel administration- procurement- marketing- IT- HRD- finance & accounting.
Remark:- Available data on physical infrastructure was not available.- Production per day ranges from 8-12 tons.
Manpower management
Chief executive officer (CEO)
Head of manufacturing Chief operating officer
DGM (Production)
Maintenance Manager Knitting Manager Dyeing Manager Finishing Manager Q.C Manager
Asst. Manager Deputy Manager Shift officer Shift officer
Shift officer Shift officer
Electrical Incharge Mechanical Incharge
ORGANOGRAM OF MANPOWERORGANOGRAM OF MANPOWER
MACHINE DESCRIPTION
Introduction: BKL is an integrated computerized company. It has total 18 dyeing machines among of them 10 machines are fully computerized. The machines are centrally controlled by Beacon Controller.
Specification :
Dyeing machineries:
Machine No. : 1, 2, 3, 7, 8
Machine Name : Eco-soft
Company Name : Thies, Germany
No. of Nozzle : 4
Capacity : 500-600 kg.
Diff. Pressure : 500-600 m.bar.
Rope speed : 200-250 m/min.
fig: Thies machine
Machine No. : 5
Machine Name : Mini-soft
Company Name : Thies, Germany
No. of Nozzle : 1
Capacity : 75 kg.
Diff. Pressure : 500-600 m.bar.
Rope speed : 200-250 m/min.
Machine No. : 6
Machine Name : Eco-soft
Company Name : Thies, Germany
No. of Nozzle : 2
Capacity : 350 kg.
Diff. Pressure : 500-600 m.bar.
Rope speed : 200-250 m/min.
Machine No. : 9
Machine Name : Luft-roto
Company Name : Thies, Germany
No. of Nozzle : 2
Capacity : 200-350 kg.
Diff. Pressure : 500-600 m.bar.
Rope speed : 200-250 m/min.
Machine No. : 10
Machine Name : Luft-roto
Company Name : Thies, Germany
No. of Nozzle : 3
Capacity : 500-550 kg.
Diff. Pressure : 500-600 m.bar.
Rope speed : 200-250 m/min.
Machine No. : 11
Machine Name : Local
Company Name : Beximco, Bangladesh
Capacity : 70 kg.
Pressure : 500-600 m.bar.
Rope speed : 200-250 m/min.
Machine No. : 12
Machine Name : Local
Company Name : Beximco, Bangladesh
Capacity : 10-20 kg.
Diff. Pressure : 500-600 m.bar.
Rope speed : 200-250 m/min.
Machine No. : 13
Machine Name : Local
Company Name : Beximco, Bangladesh
Capacity : 5-10 kg.
Diff. Pressure : 500-600 m.bar.
Rope speed : 100-150m/min.
Machine No. : 14
Machine Name : Local
Company Name : Beximco, Bangladesh
Capacity : 120-150 kg.
No. of Nozzle : 1
Diff. Pressure : 500-600 m.bar.
Rope speed : 150-280 m/min.
Machine No. : 15
Company Name : Thies, Germany
Capacity : 150-200 kg.
No. of Nozzle : 2
Diff. Pressure : 500-600 m.bar.
Rope speed : 150-280 m/min.
Machine No. : 16, 17
Company Name : Thies, Germany
Capacity : 350-450 kg.
No. of Nozzle : 3
Machine No. : 18
Machine Name : Local
Company Name : Beximco, Bangla
Capacity : 8-15 kg.
Diff. Pressure : 500-600 m.bar.
DESCRIPTION OF FINISHING M/C:
HYDRO EXTRACTOR M/C: Manufacturer : Nazar corporation (Pakistan)
Extraction % : 65% Maximum.
Speed : 1400 rpm.
.
DEWATERING M/C:
Manufacturer: CALATOR BORAS (SWEDEN)
Controlling Parameters:
Padder pressure : 4-7 barPick up % : 85%GSM : 20-35%Speed at m/c : 8.5 m/min-60 m/min
DRYER
Controlling parameters:
GSM : 15-35%
Shrinkage : 12-15%
EQUIPMENT USED:
Following equipment are used for relax drying process:
a) Ruckh relax dryer (Germany):* Gas burner heated.
* 4 chamber, 1 burner/ 2 chamber.
b) Santex Relax Dryer (USA):* Steam heated.
* 2 Chamber.
MACHINE SETUP:
a) M/C set up for Ruckh relax dryer:
M/C parameter Set-up value
Temperature setting 1000c- 1200c for white shade
1200c-1300c for light shade
1300c-1400c for Dark shade
1500c-1700c for curing
Blower fan setting Auto
Exhaust fan setting Auto
M/C Speed 3-35 m/min. Depends on quality of fabric.
Over feed 0-40% depends on fabric construction.
Width of expreader setting 45-114 cm: Depends on the required width of
fabric.
Burner Gas pressure 10-15 m bar.
b) M/C set up for Santex Relax Dryer:
M/C parameter Set-up value
Temperature 1000c- 1100c for white shade
1100c-1200c for light shade
1200c-1300c for Dark shade
Blower fan setting Push button switch on
Exhaust fan setting Push button switch on
M/C Speed 1-12 m/min. Depends on quality of fabric.
Over feed 0-45% depends on fabric construction.
Checking parameters : 1. Shade Check
2. Width check
3. Weight check
4. Compaction check
SLITTER M/C:
Equipments used:
Airtex Slitter Machine (Sweden)
Speed : 20-25 m/min.
M/C parts :a) Rotary blade b) Ring
c) Guide Roller d) Plaiting
e) Sensor
Checking parameters:1) Cutting line check
2) Bow & slant check
3) Fault check :
STENTER M/C:
Equipment used:Krantz Stenter Machine (Germany)No of chamber : 7No of Burner : 14No of Padding through : 2No of exhaust fan : 7 fig: stenter machine
Machine Setup:
M/C parameters Set up value
Padder pressure 2 to 8 bar
Temperature setting 90- 1800 c
Blower fan setting lower to high
Exhaust fan setting Manual
Width of m/c chain setting 110 cm up to 260 cm
Over feed 0-60%
Burner gas pressure 30-50 m/ bar
Machine speed 6 to 60 m/ min
Light wt (100-140 GSM)
Medium wt (150-180 GSM)
Heavy wt (190-250)
20-30 m/min
14-18 m/min
10-15 m/min
Checking parameters : 1. Shade Check
2. Width check
3. Weight check
4. Compaction check
5. Fault check : Operator checks -
TUBULAR COMPACTOR :
Equipment used:
Ruckh Tubular Compactor m/
M/C set up:
M/C parameters Set up valueSteam pressure 4-6 bars
Air pressure 5 bar
Temperature 90-1000c
Cooling fan Motor Auto
Width control 48 to 114 cm
Speed setting 5- 35 m/min
Checking parameters: 1. Shade Check
2. Width check
3. Weight check
4. Compaction check
Open compactor:
Manufacturer: Feraro (Italy)
Fig: Open Compactor m/c
M/C set up:
M/C parameters Set up value
Steam pressure 4-6 bars
Air pressure 5 bar
Temperature 700-1000c
Width 36”-100”
Speed 5-25 m/min.
Checking parameters: 1. Shade Check
2. Width check
3. Weight check
4. Compaction check
RAW MATERIALS
INTRODUCTION: Raw material is a unique substance in any production oriented textile industry. It plays a vital role in case of continuous production & for high quality fabric.
Types of raw materialThe basic raw materials used are:
fabricdyestuffschemicals & auxiliaries.
Names & source Fabric:
Different types of fabric treated in BKL dyeing section are namely- Single Jersey- Single jersey with lycra attachment - Polo pique - Back pique- Rib Fabric - Lycra fleece - Jacquard- Cross -rib
Dyestuffs:
Chemicals:
Brand name Type SourceAnti creasing agent Techna,Italy
Bluton BVB1 Violet tone brightener CHT,GermanyCibacel DBC Sequestering agent Ciba,India.Cibafix ECO Fixing agent Ciba ,Switz.Cibafluid C Anticreasing agent Ciba ,Switz.SandocleanPCLF Detergent Clarient,GermanyPermacol FA Stabilizer Techna,ItalyNovostone CR Enzyme Techna,Italy
Redder tone brightener CHT,GermanyCyclanon E Fixing agent BASF,GermanyCyclanon ECO Reduction cleaning agent BASF,GermanyJinlev RLF349 Dispersing agent Geigy,TaiwanEulysin S pH buffer in PET dyeing BASF,GermanyFelosan NOF Detergent CHT,GermanyUvitex EBF Whitening agent Ciba ,Switz.Jinlev CL-225 Levelling agent for reactive dye Geigy,TaiwanOxalic caid Iron remover -Palegal FA-8 Levelling agent for disperse dye BASF,Germany
Dye Brand name Origin/source
Ciba Ciba , Switzerland
Kemafix Jaychem,IndiaLevafix Dystar , GermanyProcion Dystar, germany
Kemazol Jaychem,IndiaRemazol Dyestar , GermanySolazol Solarfine , TaiwanSolacion Solarfine , Taiwan
Disperse dyeTerasil Ciba , SwitzerlandDianix Dystar, germanyDispersol Dystar, germany
Antifoaming agent BASF,GermanyPermacol SQ Sequestering agent Techna,ItalyNa thiosulphate Peroxide killer -Uniperol O Washing agent for PET dyeing BASF,GermanyUvitex EVF PET brightener Ciba, Switz.Uvitex 2B Yellow tone brightener Ciba ,Switz.Mollan129 Soapinging agent Rota,dystarAcetic acid pH controller -Reduction HCS Reduction cleaning agent Geigy,TaiwanMollan130 Sequestering agent Rota,dystarBluton 2B Whitening agent Ciba,India
Final Inspection
Finished Store
Delivery to Garment industry
SEQUENCE OF OPERATION:
Kniting
Grey inspection
Batch preparation
Pretreatment White Processing
Polyester dyeing Cotton dyeing
Hydro extracting
Dewatering
Drying compacting
The BEXIMCO Knitting Limited is a self-sufficient modern company. Its knitting section is divided into two sections –
1. Flat knitting section & 2. Circular knitting section.
1. Flat Knitting Section:
.
Equipments used:
1.1 Production Equipment
The following equipments are used for production:
Name Fabric
type
Manu. Model Gauge Length No. of
m/c.
STOLL semi-
jacquard
Germany -------- 14 84 inch 2
MATSUYA Plain Japan M-100 14 100 cm 26
MATSUYA Plain Japan M-70 14 70 cm 22
KAUO
HENG
Semi-
jacquard
Taiwan KH-
313
14 54 inch 17
MATSUYA Semi-
jacquard
Japan 14 64 inch 2
Total machines = 69
2. Circular Knitting Section:
.
Equipments used:
2.1 Production Equipment
Gauge Model No. Origin No. of Cylinder Existing Set-up18 1995 CAMBER, UK 05 020 1995 CAMBER, UK 10 0824 1995 CAMBER, UK 14 1428 1995 CAMBER, UK 26 06
16 (RIB) 1995 CAMBER, UK 01 0118 (RIB) 1995 CAMBER, UK 01 0120 (RIB) 1995 CAMBER, UK 01 0
Total 58
Note: There are 7 (Seven) machines with lycra facilities.
Knitting Faults: Barre or stripe Press off Miss stitch/ drop stitch Needle mark Sinker mark Oil stain Crease mark/Edge mark Holes Excessive slubs Spirility Broken needle Pin hole Tight course Missing Yarn,etc.
Equipment used:
a)Inspection m/c( Calator Sweden)
b) Inspection Table.
M/C Set up (Inspection m/c):
Greiege body and Rib Inspection Greiege body and Rib Inspection
M/C set up Parameter range Set value
Roller speed 0-40 m/min 25-30 m/min
light Not applicable Artificial day light
Length measuring unit
Not applicable Attached with m/c.
Following faults are detected:
Faults:
H= Hole OS= Oil stain
DS= Drop stitch. WD=Wrong Design
NL = Needle line. S = Stripe
TT = Thick & Thin yarn. S = Slubs
SM = Sinker Mark. WP=Wrong Ply,etc.
Process sequence of Batch preparation receive batch card from Grey In-charge
Make the priority as per dyeing plan
Take one specific Batch card.
Read the Batch Card for own understanding
Check the availability of fabric
Take required quantity of body fabric from ware-house.
Make required no. of Rope maintaining equal length.
Take collar/cuff as per size, keep the total weight.
Batch preparation
Distribute the collar /cuff or Rib in each rope equally unsure equal length
Stitch the fabric
Write down the weight against roll no. in the back side of the Batch Card.
Write the total weight in Batch Card.
Put signature & date.
Fill up the production report form.
M/c for Batch preparation : Two types of m/cs
a) Turning m/c b) Plaiting m/c.
SINGEING :
Equipments used:
Machine: Sando Gas Singing m/c.
Manufactures: Sando Iron Works, Japan.
M/C Setup:
Setup parameters Range Set value
Speed(m/min) 0-120 55-60 for cotton.
70 for PC/CVC.
Potentiometer Setting (rpm) 0-150 80-90 for cotton fabric
60-70 for CVC/PC.
Burner in use 1 or 2 2
Burner operation mode. Auto/Manual Auto
Flame height (cm) 1-8 6 for white & light shade fabric.
6.5 for medium & dark shade fabric
Flame angle with the direction of fabric.
450 to 900 450 for blends
900 for cotton
Flame intensity Low/normal/
high
Low – not used
Medium – for white & light shade
High – for medium & dark shade fabric
Singeing Fault :
a)Singeing line :
b)Uneven singeing :
.
Mercerizing:
Equipment used: Dornier Mercerizing m/c (Germany).
Required parameters :
Parameters Value
Squeeze pressure 1.5-2 bar (by compressed air)
Temperature of washing 800-900c
PH after mercerizing 7-7.5
MERCERIZING PROCESS MERCERIZING PROCESS
Caustic solution temperature In mixing tank : 80-900c
In caustic stroage tank : 70-800c
In chiller : 140c
In Mercerizing bath : 160-200c
1st sigar diameter Set with fabric dia +3
2nd sigar diameter Set with fabric dia +5
Caustic strength 280 Be
SCOURING:
Single Stage Scouring-Bleaching:
Process steps : Take water in bath at required level.
Load fabric.
Circulate fabric & raise temp. at 60oc
Add Anti-creasing agent, Detergent, sequestering agent, stabilizer.
Add Caustic soda
Circulate fabric.
Add H2O2.
Continue circulation fabric 25 min. at 100oc
Decrease temp. at 800c
Rinse & Drain.
Add Detergent & H2O2 killer and raise temp 80oc
PRE-TREATMENT PRE-TREATMENT
Continue circulation for 10’ at 60oc
Rinse & Drain.
Hot wash for T/C TTC:
To remove waxes, fats.
Increase absorbency for T/C & TTC for dark shades.
Curve:
Recipe :1. Anti-creasing Agent : 1 g/L2. Detergent : 1.5 g/L
Steps : Take water in bath at required level. Load fabric. Circulate fabric & raise temp. at 60oc Add Anti-creasing agent, Detergent.
Circulate fabric and raise temp.
Enzyme Treatment:
If dead fibre or hairiness present in fabric then enzyme treatment is done.
Function: It attacks surface cellulose fibre and removes it from surface.
Precaution :
Excess enzyme is harmful for cellulose fabric.
Application of enzyme is done by two ways :
600c2
1
900c15
a) Pretreatment Enzyme treatment Dyeingb) Pretreatment Dyeing Enzyme treatment
Enzyme treatment carve :
REACTIVE DYEING
1.REACTIVE DYEING FOR SENSITIVE SHADE AT 60oC .
Dyeing curve:
90˚c
60˚c 60˚c
550c2+3
1
30
Drain 3 Drain
750c
10
REACTIVE DYEING FOR DARK SHADE AT 60oC:17. Unload fabric.
Dyeing curve:
60˚c 60˚c 80˚c 70˚c
Rinse
HOT BRAND REACTIVE DYEING :
DYEING AT 92oC :
Dyeing curve :
POLYESTER DYEING
Disperse dye:
Disperse dye is one kind of organic colouring substances which is free of ionizing group, less soluble in water & used on hydrophobic Textile material .
.Dyeing curve:
920c 60 Shade check
1
600c
10600c
2
3
20
Rinse
800c
4
5 10
5
600c
10
Rinse
Rinse
400c
800c
10
600c
Rinse
1
301300c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse
32
780c
Shade check
500
c
4
7 Rinse400c
800c Rinse
5+6
Recipe :1. Acid Buffer (Eulusin FAS) : 1.8 g/L2. Dispersing agent (Jinlev RLF349): 1.8 g/L3. Antcreasing agent (Ciba fluid C): 0.5 g/L4. Dianix Red : 0.106 %
Dianix Yellow : 0.07%Dianix Black: 0.78 %
5. Reduction clearing (Reduction HCS): 1-3 g/L6. Acetic Acid: 1g/l.6. Detergent (Albatex S): 0.5 g/L
Process steps for Polyester part:
STRIPPING:
Stripping is carried out to remove uneven of shade or to reduce dark shade. In BKL Stripping is done for 100% cotton, T/C, CVC & TTC.
I. FULL STRIPPING FOR 100% COTTON:
.
Curve: 100Cx60min
80C CR 60CX15
50C 80C 80CX10
3
1 2
Polyester striping
Process curve :
3c/min
Whitening:
Whitening Is A Chemical treatment, fabric white at a desried level by bleaching & OBA treatment.
Factors Influencing Whitening:
1. PH
2. Temp.3. Time
Whitening Process for 100% cotton:
Process curve:
500c
1
Rinse2
3
30
600c
5600c
6
10
1350c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse
5
10
4700c
900c
30
Cold rinse
Check shade
600c
4
1
Rinse6
3 5
30
600c
10
800c
8
10
2 7
1000c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse
c
5
10
Process steps:
Take water at required level. Load fabric. Raise temp. at 600c & circulate fabric. Add Detergent, Anti-creasing agent stabilizer. Add caustic & circulate fabric. Continue circulation & add Hydrogenperoxide Add Uvitex 2b & circulate fabric. Add Glauber salt & continue 5 min. Raise temp. at 1000c & continue 60 min. Decrease temp. at 800c. Rinse for 10 min. & Drain. Hot fill & raise temp at 800c and continue 10 min. & Drain. Drain. Mixed water fill, add acetic acid & raise temp at 600c & continue
10 min. Rinse & Drain.
T/C whitening process:
Process curve :
600c4
1
Rinse5
3 6
30
600c10
800c
1010
2 8
7 9
1100c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse
900c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse
700c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse600c
Rinse
FINISHING FINISHING
INTRODUCTION After dyeing, knit fabric is required to finish. During dyeing all knit fabric are dyed in
tubular form. According to buyer’s requirement knit fabric are finished in Open form or tubular form.
For Tubular form following m/c are required:
Hydro-extractor
De-watering
Dryer
TubularCompactor
For open form following m/c are required :
Hydro-extractor
De-watering
Dryer
Slitter
Stenter
Open compactor
For collar & cuff finishing following m/c are required :
Hydro-extractor
Softening Machine
Dryer
Chemicals used:
TC collars & cuffs:1. Softener (cationic & nonionic) 2. Additive 3. Stiffener 4. Acetic Acid to adjust pH
100% cotton fabric (soft): 1. Softener
2. Additive3. Acetic acid to adjust PH
100% cotton collar & cuffs (cross-linking):
1. Softener (cationic /nonionic) 2. Additive
3. Resin4. Catalyst.5. Acetic acid to maintain PH
CVC collar & cuffs:1. Softener (cationic & nonionic)2. Additive3. Stiffener 4. Acetice acid to maintain PH
CVC collar cuffs (soft):
1. Softener 2. Additive 3. Acetic acid to maintain PH
Water Repellent collar & cuffs:
1. Hydrophobic agent. 2. Softener 3. Additive 4. Acetic acid to adjust the PH
M/C set up:
M/C parameters Set up valuePadder pressure 2-7 bar
M/C speed As standard speed set by manufacturer.
\Equipments used: a) Nazer Inspection m/c, Pakistan.
b)Verivide Day Light box.
Following faults are detected & identified in final inspection for body :
a) Penalty points legend:H= HoleOS = Oil stainCS= Chemical stain.W= Water spots.Fy= Fly yarn.YC = Yarn contamination.WX= White speaks.IS = Insect spots.R= Rub mark.DS= Dye stain.D= Dirt stain.Rs= Rust stain.
Collar & cuff inspection.
FINAL INSPECTION FINAL INSPECTION
Following faults also detect and identify:
Faults Decision
1. Rub mark Reject
2. Cutting Reject
3. Hole Reject
4. Crumple Reprocess
5. Tipping bleed Reprocess
6. Uneven shade Reprocess
7. Neps Enzyme wash
8. Oil spot Reject
9. Role to role variation Reprocess
10. Yarn contamination Reject
11. Barre mark Reject
QUALITY ASSURANCE SYSTEM
Equipment used in Lab:
a) Rota Dyer:
Manufacturer: Qayyum Textile Ltd., Pakistan.
Capacity : 12 beaker per m/c
Purpose : Sample dyeing ,Measure wash fastness.
b) Ahiba Nuance dyeing m/c:
Manufacturer : Data color International
Capacity : 12 beaker per m/c
Purpose : Sample dyeing.
c) Ahiba Spectra dye:
Manufacturer : Data color International
LAB
Capacity : 24 beaker per m/c.
Purpose : Sample dyeing.
d) Incubator:
Purpose :
Pre-drying., Water fastness.
e) Taba Gs:
Purpose : To boil water.,Washing fastness.
f) Electrolux Washcator:
Manufacture : James H. Heal & Co. Ltd. Halifax.
Country : England.
Purpose : Washing & Hydro-extraction.
g) Tumble dryer :
Country : UK (Electra).
Purpose : Drying.
h) Pilling Tester:
Manufacturer: James H. Heal & Co. Ltd. Halifax.
Speed:30-60rpm.
i) Electronic Balance:
Manufacturer: ohaus corp. USA
Readability:0.001gm
Maxm Capacity:210gm
Some Fabrics used in BKL Lab:1. Single jersey.
2. Polo Pique.
3. Back Pique.
4. Normal Rib.
5. Interlock.
Chemicals & Auxiliaries Used:
For reactive Dyeing: For Cibacron Dyes:
L: R = 1: 8600C Dyeing:
For Levafix Dyes:L: R = 1: 8
600c Dyeing:
For Remazol Dyes:
L: R = 1: 8
600C Dyeing:
For Procion Dyes:
L: R = 1: 8
820C Dyeing:
L: R = 1: 8
920C Dyeing:
For Disperse Dyeing :
i) Temp. : 1300c
ii) Dispersing agent : 0.8-1 g/L
iii) Acetic acid : 0.5-1 cc/L
iv) PH : 4.5-5
Program Number in Ahiba Dyeing Machine:
Program no. Temperature Time
1 1000c 68
2 800c 90
3 400c 20
4 600c 50
5 500c 37
6 620c 60
7 900c 96
8 600c 40
9 800c 40
10 600c 45
11 600c 70
12 700c 30
13 950c 30
14 950c 10
15 950c 60
16 1300c 76
17 1100c 30
18 1000c 40
On line quality control WORKING AREA OF ON LINE QUALITY CONTROL:
a) On line circular knit:
.
b) On line flat knit:
c) Greige inspection:
.d) On line finishing:
Response to faults:
Following response are to be taken:
Faults Response
Greige inspection Inform yarn supplier & knitting department.
Knitting fault Inform knitting Department
Finishing fault Inform Finishing Department
Off line quality control Typical Quality control in BKL:
a) Shade Check.
b) Gram per square meter (GSM) test
c) Width on dia check.
d) Shrinkage test
e) Spirality test
f) Crocking/Rubbing Fastness test.
g) Pilling resistance test.
h) Wash fastness test.
i) Water fastness.
j) Color fastness to perspiration.
a) Shade check:
Shade check after finishing of fabric is done according to customer's recommended light source.
Equipment used: Verivide Light box.
Manufacturer: James H. Heal & Company, Halifax, England.
Light sources:
Artificial day light D65
TL 84
F (Filament)
UV (Ultra violet) light etc.
b) Gram per square Meter:
After finishing of fabric gram per square meter is check by GSM cutter.
Equipment used: GSM cutter.
Manufacturer: James H. Heal & Company, Halifax, England.
c) Width or Dia Check :
After finishing of fabric width on dia of the fabric is check by measuring tape.
d) Shrinkage test:
After finishing of fabric shrinkage is tested.
Equipment used: Electrolux wascator
Manufacturer: James H. Heal & Co. Ltd. Halifax, England.
Test Method
BS 26330 3A 60 +/- 30c Prog – 13
BS 26330 4A 50 +/- 30c Prog – 14
BS 26330 5A 40 +/- 30c Prog – 15
\
Standard Shrinkage %:
Length (max): 5% after domestic washing
Width (max): 5% after domestic washing.
e) Spirality test:
After finishing of fabric spirilily is tested.
Equipment used: Electrolux wascator.
Manufacturer: James H Heal & Co. Ltd. Halifax, England.
Procedure:
1
Test Method
BS 26330 3A 60+/-30c Prog – 13
BS 26330 4A 50+ /-30c Prog – 14
BS 26330 5A 40+/-30c Prog – 15
Where,
L= Length of Sample.
D1, D2 = Distance of seam movement.
Calculation:
Spirility % = 100
Standard spirility % :
Maximum : 5% after domestic washing.
f) Rubbing / Crocking fastness:
After finishing of fabric rubbing fastness is measured.
Equipment used: Crock meter.
Manufacturer: James H. Heal & company, Hali fax, England.
Method: AATCC 8
g) Pilling resistance test:
LL
D1 D2
1st Side 2nd Side
After finishing of fabric pilling resistance test is carried out.
Equipment used: ICI pilling box
Manufacturer: James H. Heal & Company, Halifax, England.
Method: BS 5811 or according to customer requirement.
Revolutions for BS 5811 method:
a) 7000 cycle for low pilling
b) 9000 cycle for Medium pilling
c) 11000 cycle for High Pilling.
h) Wash fastness test:
After finish of fabric wash fastness is checked:
Equipment used :
a) AG machine.
Manufacturer : Quyyum textile Engineering, Pakistan
b) Ahiba Nuance.
Manufacturer : Data Color International, U.K.
Method : ISO 105-C06
Standard result:
i) Water fastness:
After finishing of fabric water fastness is checked.
Equipment used:
a) Perspirometer
Light shade Dark shade
Staining scale 4 3/4
b) Carbolite (Thermostat Oven)
Manufacturer:
James H. Heal & Company, Halifax, England.
Standard result:
Light shade Dark shade
Staining 4 ¾
j) Color fastness to perspiraion:
After finishing of fabric color fastness to perspiration is checked Equipment used:
a) Perspirometer
b) Carbolite
Manufacturer:
James H. Heal & Company, Halifax, England.
Method: AATCC 15.
MaintenanceMaintenance
Maintenance:
Types of maintenance:
Maintenance
Preventive Maintenance Corrective Maintenance
Mechanical Maintenance
Electrical Maintenance
Mechanical Maintenance
Electrical Maintenance
PM Tasks list
Maintenance : Mechanical
Machine : Thies Dyeing MachineSl. No.
Item need to be checked & Serviced
1. Crease the winch bearing (Grease Staburag NBU-12)
2. Complete cleaning of machine
3. Cleaning of drain valves, replace seals if required
4. Check air supply filters, regulators, and auto drain seals
5. Clean filters element and blow out
6. Greasing of Unloading Roller Bearings by BP Energrease LS-2
7. Checking of Oil level and bolts of Unloading Roller Gearbox.
8. Checking of unloading roller coupling and packing
9. Checking and cleaning (if required) of Main Vessel Level Indicator
10. Check the oil level of pump bearing and refill if required by BP Energol THB-100
11. Check the function of heat and cool modulating valves
12. Check all belts and belt tension
13. Check all door seals
Maintenance : Electrical
Machine : Thies Dyeing m/cSl. No. Items need to be checked & Serviced 1. Check & clean fluff and dirt at all motor fan covers2. Check all motor's terminals3. Check main panels (by using compressed air)4. Check panel cooling fan & clean it filter5. Clean main pump inverter and its cooling fan6. Check all on/off switches7. Check current setting of all circuit breaker & motor over loads.8. Visual checking of all power & control cables9. Check all emergency Switches10. Check DC drive of neel motors11. Check all pressure switches
12. Check calibration of main vessel & all additional tank13. Check all pneumatic solenoids14. Check calibration of heating/cooling. Modulating value.15. Check all indicating lamps
Maintenance tools & equipments :
1. Pliers2. Inside Calipers3. Outside Calipers4. Digital Multi Meter5. Heating Shoulder6. Hammer7. Philes8. etc.
Chapter 8
Utility services
Available facilities of utility:ElectricityGasWaterCompressed air
Steam.
Electricity : The main utility electricity is supplied from PDB and also by Generator.
Specification:Equipment used: Gas generator.No. of generator: 8 (1 self start able & other 7 are air+CH4
start able).Manufacturer : Wartsila-Frank.-Gas engine used.-16 cylinders per engine.-Overall efficiency : 80%.-Heat recovery possible from 4 engines.-Pressure of gas : 60-62 milibar.-Air pressure : 7 bar.-Electricity take up from PDB : 1.5MW/sec.
Total power is then distributed as per requirements of different section of Beximco industrial park.
Gas: Gas is mainly used for steam production.
The gas is used from TITAS.Generally 36 m3 gas is required to produce 1 ton steam.
Water: Continuous supply of water for BTL,BDL&BKL must be ensured by pump.Mainly two pumps are used for water pick up.
PUMP CAPACITY SETUPSubmersible pump-I 260 m3/hr Discharge value:100% openSubmersible pump-II 204 m3/hr Discharge value:100% open
Depth of pump: 140ft.Also pumps for chemical dosing & Centrifugal pump for yarn dyeing.
Steam: Pure steam with required temperature must be produced to meet the
continuous demand of steam in different sections.-Fire tube type boiler is used.
-No. of boiler: (4+1) twine boiler.1 boiler is operated by using burn gas.4 boiler is operated by Titas gas.
-3 pass heating system.-Measuring meter for water supply.-4" depth greasol insulation so no heat at outside of drum.-Boiler capacity; 10ton.-Steam pressure; 8.2bar.-Steam flow = 7 ton(approximately)-Manufacturer: Thermax;India.-Model: TD-100-10-54/6AS/E.-Fuel: Natural gas.-Water pressure: 10.3bar.-Evaporation= 1000*3 kg/hr.
COMPREESOR
Parameters Set value Unloading pressure 7.5 barPressure difference 0.6 barOil pressure 1.2 barMotor running time 15 sec
-Total no. of compressor = 3+3 =6-Capacity: 774 lt air/compressor/sec.-Manu: Atlas capco.-Country: Belgium.
Oil free air is prepared by Electronikon.
Chiller:Manufacturer: Thermax.Country: India.
-To start a chiller electricity & steam is required.-Capacity :[(21083)+(500*1)] ton = 1130 ton water cooling.-Absorption type Chiller is used.
Source of Utility:Electrically : PDB & Generator.Steam : Boiler.Water : Pump.Compressed air : Compressor.Temperature control : Chiller.Gas : TITAS.
The effluent treatment plant:
Characteristics of raw effluents:Volume : 3600 cubic meter/dayPeak flow : 225 cub met/hrpH : 10-12.5BOD : 500-800 PPMCOD : 1300-2000 PPMTDS : 2000-5000 PPMS S : 100-400 PPMColour : Black/ Blue
Chemicals used & their colours:
Chemicals used AppearanceFerrous sulphate Granular solid, greenish colourLime White bulk formPolyacrylate White granular solidSulphuric acid Clear liquidAlum White bulk formNa-hypochlorite Clear liquidHydrochloric acid Clear liquid
Flow chart of effluent treatment:
Raw effluent
Skin chamber
Collection Sump
Pump station
Dissolved Air Floatation Tank
Clarifier fig: Aeration tank
Aeration tank
Setting tank
Clear water, pH check
Sand filter
Carbon filter
Drain
Sludge separation:Sludge of DAF
Sludge thickening plant
Sludge drying be
Typical output of the plant:
Raw effluent treated 15000 LPHRaw effluent colour BlackRaw effluent pH 11Treated effluent colour Light greenishTreated effluent pH 8.5Treated effluent temp. 38 CTo0tal suspended solids 35 PPM
STORE & INVENTORY CONTROL
☻Frequency of inventory control:- Monthly inventory control- Annual inventory control
Scope of inventory control- Raw materials
Dyes store Others chemicals store Grey fabrics
- Finished fabric- Spare parts- General store
Capital equipmentAccessoriesStationaryMaintenance parts.
Store capacity- Dyes 6-7tons
- Chemicals 33-35tons- Grey fabric 20-25 tons- Yarn storage 50 tons- RFD 50 tons- Set range of dyes 80-100kg/day
- Set range of Chemicals 2-2.5ton/day
COST ANALYSIS
Costing of the product: Costing of the product is done by the consideration of the following factors:
1.Amount of raw materials consumed.2.Direrct labour.3.Indirect labour.4.Factory cost.5.Office and administrative cost.6.Sales and distribution cost.7.Profit,etc.
Remarks: The costing of product is a secret matter of the industry. They are not interested to flash up the cost related data.So, we could not collect the price of the product and costing of the product.
MARKETING ACTIVITIES
Consumer of the products: Beximco knitting LTD. is a100% export oriented industry. . Name of the main buyers of the products of the industry are given below:
1.Ash city.2.B&C.3.Wall mart.4.Haddad.5.Pimkie.6.Zara.7.Charter House.8.H&M.
Package size and label:
Local Market: Beximco knitting LTD. is a100% export oriented industry. All the goods produced in this industry are exported into various foreign countries. So,goods are not supplied into local markets.Importing countries:The countries which are importing goods from Beximco knitting Ltd are given below:
1.USA.2.Canada.3.Germany.4.Europian countries.
CONCLUSION
LIMITATION OF THE REPORT:
►Because of the secrecy act, the data on costing and marketing activities has not been supplied and hence this report excludes these chapters. ►we had a very limited time. In spite of our willing to study more details it was not possible to do so. ►Some of the points in different chapters are not described as these were not available.
►These whole process is not possible to bind in such a small frame as this report, hence our effort spent on summarizing them.
LASTLY: The special in this report is that the information, data and description is very much subjective and practical. So, one can easily have an idea about the whole dyeing unit of BKL at a single look on it. The new comer can use this report for further details study or can know Beximco knitting Ltd. without much work. But what should be remembered the chemicals, some process steps may be modified within the period this paper goes to the reader.