Bizhub 751 601 Spec and Install Guide

1

Konica Minolta bizhub 751/601Specification & Installation Guide

bizhub 751/601 Specifications Type Console

Document holder Stationary

Photoconductor OPC

Luminous source White inert gas fluorescent lamp

Copying system Laser electrostatic transfer method

Developing system Dry-type dual-component reverse magnetic brush developing

Fusing system Heat roller

Resolution Scanning: 600 dpi x 600 dpi Printing: 1,200 dpi x 600 dpi equivalent

Document Types: Sheets, books (spreads), three-dimensional objects Size: Maximum 11" x 17" (A3) Thickness: Maximum 1.25"; Weight: 15 lb. (three-dimensional objects)

Paper types Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.), Custom paper 1/2/3, recycled paper, colored paper, special paper, fine paper, label sheets*, letterheads, tab paper, overhead projector transparencies*, trace paper* *Can only be fed through the bypass tray

Paper sizes Tray 1 & 2: 8.5" x 11", 5.5" x 8.5", A4, B5, A5 Tray 3 & 4: 11" x 17" R to 5.5" x 8.5", 8.5" x 14" R, F4*1, A3 R to A5 Width: 7.25" to 12.25"; Length: 5.75" to 18" Bypass tray: 11" x 17" R to 5.5" x 8.5"/R, 8.5" x 14" R, F4*1, A3 R to A6 R Width: 4" to 12.25"; Length: 5.75" to 18"

Paper tray capacity Tray 1: Normal paper: 1,500 sheets (20 lb.) Tray 2: Normal paper: 1,000 sheets (20 lb.) Tray 3 & 4: (Universal tray): Normal paper: 500 sheets (20 lb.) Bypass tray (Universal tray): Normal paper: 100 sheets (20 lb.)

Warm-up time bizhub 751: Less than 5 min. bizhub 601: Less than 4 min. and 30 secs.

Image loss copy/print

Simplex: Leading edge/trailing edge: 3 mm or less Duplex: Leading edge/trailing edge: 4 mm or less (front side) 3 mm or less (back side)

First copy bizhub 751: 3.0 seconds or less bizhub 601: 3.5 seconds or less

Copy speed bizhub 751 8.5" x 11" 75 ppm 11" x 17" R 42 ppm 8.5" x 14" R 50 ppm 8.5" x 11" R 61 ppm 5.5" x 8.5" 75 ppm

bizhub 601 8.5" x 11" 60 ppm 11" x 17" R 34 ppm 8.5" x 14" R 40 ppm 8.5" x 11" R 49 ppm 5.5" x 8.5" 60 ppm

Magnification ratios x1.0 (full size): x1.000 ± 1.0% or less Enlarge: x1.214, x1.294, x1.545, x2.000 Reduce: x0.785, x0.772, x0.647, x0.500 Minimal: 0.930 Zoom: x0.250 to x4.000 (in 0.1% increments) Stored zoom ratios: 3

Multiple copies 1 to 9,999 sheets, 1 to 9,999 sets

Density adjustment Copy density: Automatic and manual adjustment (9 levels) Background density: Manual adjustment (9 levels)

Power requirements AC120V, 16A, 60Hz

Noise 75 dB or less (while operating)

Power consumption Maximum 1.92 kW or less (including options)

Dimensions 34.9" (W) x 33.8" (D) x 44.9" (H)

Space requirements*2 50.25" (W) x 31.25" (D)

Memory 1,024 MB RAM (192 MB file memory)

Weight Approx. 496 lb.

*1 There are four F4 (Foolscap) sizes: 8.25" x 13" R, 8.125" x 13".25" R, 8.5" x 13" R and 8" x 13" R. Any one of these sizes can be selected. For details, contact your technical representative.

*2 The indicated spaced requirements represent the space required to fully extend the bypass tray. In order to incorporate improvements, these product specifications are subject to change without notice.

Duty Cycle

Up to 300,000. Maximum monthly print volume supported under standard vendor supplied service. Defines the upper end of the expected customer volume for the device. Customers should consider multiple machines if average monthly volume approaches duty cycle on a continual basis.

03/2011


2

Space Requirements

bizhub 751/601 + SF-602 + LU-405

3.94 (100) 3.94 (100)

34.88 (886)19.29(490)

7.64(194)

7.87 (200)

Uni

t: in

ch (m

m)

18.

90 (4

80)

15.75(400)

37.40 (950) 33.92 (859)

79.09 (2009)69.69 (1770)

63.7

8 (1

620)

44.8

8 (1

140)

bizhub 751/601 + OT-505

3.94 (100) 3.94 (100)

50.20 (1275)

58.07 (1475)

18.9

0 (4

80)

Uni

t: in

ch (m

m)

200

335

7.87 (200)

37.40 (950)

79.09 (2009)

63.7

8 (1

620)

44.8

8 (1

140)

33.92 (859)

bizhub 751/601 + FS-610 + ZU-605 + LU-406 + PI-504

34.88 (886)31.50 (800)17.09(434)

3.94 (100) 7.87 (200)3.94 (100)6.65 (169)

Uni

t: in

ch (m

m)

680

990

63.7

8 (1

620)

44.8

8 (1

140)

18.

90 (4

80)

79.09 (2009)97.99 (2489)

33.92 (859)37.40 (950)


3

Environmental Requirements

Temperature 50° to 86° F

Humidity 10–80% RH

Noise while engine under operation < 75 dBA

Noise while feeder under operation 84 dBA

Ozone emission < 1.5 mg/h

Fusing range 293 to 347˚ F

Electrical Requirements

Line options: Dedicated NEMA Diagram for 5-20R

Voltage: 120V AC

Amperage: 16.0

Cycles: 60 Hz

NEMA Part No.: 5–20R

Cord Length: 7.5 ft.

Note: The main electrical outlet must be located within 7.5 feet from the right rear corner of the bizhub 751/601 main unit.


4

Component Considerations

DF-614 Automatic Document Feeder (Standard)

Document feed methods Normal paper: Single-sided and double-sided documents “Mixed Original” function: Combination of single-sided and double-sided documents Z-folded original: Single-sided document Tab paper: Single-sided document

Document types 13.25 to 53.25 lb.

Document sizes Single-sided/double-sided documents: 11" x 17" R to 5.5" x 8.5"/R and 8.5" x 14" R Mixed document sizes: Refer to Table 1.

Capacity of Maximum 100 sheets (21.25 lb.) document feeder

Power requirements Supplied from main unit

Dimensions 24.5" (W) x 22.75" (D) x 6" (H)

Weight Approx. 28.5 lb.

LU-405 Large Capacity Unit

Paper types Normal paper (16 to 24 lb.) Thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)

Paper sizes 8.5" x 11", A4, B5, Width: 7.25" to 8.75"; Length: 10" to 12.25"

Paper capacity 4,000 sheets (20 lb. paper)

Power requirements Supplied from main body

Dimensions 17" (W) x 25.25" (D) x 27.25" (H)

Weight 66 lb.

Table 1: Possible combinations for mixed document sizes

Max. Document Width

Document Size

11" x 17" (landscape)

8.5" x 11" (portrait)

8.5" x 14" (landscape)


5.5" x 8.5" (portrait)

5.5" x 8.5" (landscape)

11" x 17" (landscape)

• • — — — —

8.5" x 11" (portrait)

• • — — — —


• • • • • —

8.5" x 11" landscape

• • • • • —

5.5" x 8.5" (portrait)

• • • • • —

5.5" x 8.5" (landscape)

— — — — — •


5


LU-406 Large Capacity Unit

Paper types Normal paper (16 to 24 lb.) Thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)

Paper sizes 11" x 17" R, 8.5" x 11"/R, 8.5" x 14" R, F4*1, A3 R to A4/R, Width: 7.25" to 18"; Length: 10" to 12.25"

Paper capacity 4,000 sheets (20 lb. paper)


Dimensions 26.5" (W) x 25.25" (D) x 27.25" (H)

Weight 92.5 lb.

*1 There are four F4 (Foolscap) sizes: 8.25" x 13" R, 8.125" x 13".25 R, 8.5" x 13" R and 8" x 13" R. Any one of these sizes can be selected. For details, contact your technical representative.

FS-524 Finisher

Exit trays Main tray, sub tray

Settings Non-stapled, Offset, Staple

Paper types Main tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.), label sheets, overhead projector transparencies, trace paper; Offset + Sort and Offset + Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.) Staple: Normal paper (16 to 21.25 lb.) Sub tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)

Paper sizes Main tray: 11" x 17" R to 5.5" x 8.5" /R, 8.5" x 14" R and F4 Sub tray: 11" x 17" R to 5.5" x 8.5" /R, 8.5" x 14" R and F4

Paper capacity Main tray: 1,500 sheets of 8.5" x 14" or larger, 3,000 sheets of 8.5" x 11", or 500 sheets of 5.5" x 8.5" or smaller 100 sets (8.5" x 11": 9 stapled pages) Sub tray: 200 sheets

Amount of shift 1.25"

Staple settings Paper sizes (no. of bound pages): 11" x 17" R to 5.5" x 8.5" and 8.5" x 14" R (2 to 50 pages)




Consumables Staple cartridge


6

Component Considerations continued

FS-525 Finisher

Exit trays Main tray, sub tray

Settings Non-stapled, Offset, Staple

Paper types Main tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.), label sheets, overhead projector transparencies, trace paper; Offset + Sort and Offset + Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.) Staple: Normal paper (16 to 21.25 lb.) Sub tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)

Paper sizes Main tray: 11" x 17" R to 5.5" x 8.5" /R, 8.5" x 14" R and F4 Sub tray: 11" x 17" R to 5.5" x 8.5" /R, 8.5" x 14" R and F4

Paper capacity Main tray: 1,500 sheets of 8.5" x 14" or larger, 3,000 sheets of 8.5" x 11", or 500 sheets of 5.5" x 8.5" or smaller 100 sets (8.5" x 11": 9 stapled pages) Sub tray: 200 sheets


Staple settings Paper sizes (no. of bound pages): 11" x 17" R: 2 to 50 pages; 8.5" x 14" R: 2 to 65 pages Other: 2 to 100 pages




Consumables Staple cartridge


7


FS-610 Finisher

Exit trays Main tray, sub tray, BM tray

Settings Non-stapled, Offset, Staple, Booklet, Tri-Fold

Paper types Main tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.), label sheets, overhead projector transparencies, trace paper; Offset + Sort and Offset + Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.) Staple: Normal paper (16 to 21.25 lb.) Sub tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.) BM tray: Booklet (Fold & Staple) setting: Normal paper (16 to 21.25 lb.); Booklet (Half-Fold): Normal paper (16 to 21.25 lb.), thick paper (24.25 to 28 lb.); Tri-Fold setting: Normal paper (16 to 21.25 lb.), thick paper (24.25 to 28 lb.)

Paper sizes Main tray: 11" x 17" R to 5.5" x 8.5"/R, 8.5" x 14" R and F4 Sub tray: 11" x 17" R to 5.5" x 8.5"/R, 8.5" x 14" R and F4 BM tray: 11" x 17" R, 8.5" x 14" R and 8.5" x 11" R

Paper capacity Main tray: 1,500 sheets of 8.5" x 14" or larger, 2,500 sheets of 8.5" x 11" paper, 500 sheets of 5.5" x 8.5" or smaller, or 100 sets (8.5" x 11": 9 stapled pages) Sub tray: 200 sheets BM tray: 20 sets (11" x 17": 5 sheets with the “Fold & Staple” setting), 33 sets (11" x 17": 3 sheets with the “Half Fold” setting), or 50 sets (1 sheet with the “Tri-Fold” setting)


Staple settings Paper sizes (no. of bound pages): 11" x 17" R to 5.5" x 8.5" and 8.5" x 14" R (2 to 50 pages)

Power requirements Supplied from main unit



Consumables Staples cartridge

Punch Kit PK-505

Number of punched holes 2 holes or 3 holes

Paper types Normal paper (16 to 24 lb.), Thick paper (24.25 to 34 lb.)

Paper sizes 2 holes: 11" x 17" R to 5.5" x 8.5"/R, 8.5" x 14" R and F4 3 holes: 11" x 17" R and 8.5" x 11" R

Power requirements Supplied from finisher

Compatible finishers FS-524/FS-525/FS-610




8


ZU-605 Z-Folding Unit

Number of punched holes 2 holes or 3 holes

Paper types Normal paper (16 to 24 lb.) with hole punching

Paper sizes 11" x 17" R to 5.5" x 8.5"/R and 8.5" x 14" R with hole punching

Fold types Z-fold

Paper types with Z-fold Normal paper (16 to 24 lb.)

Paper sizes with Z-fold 11" x 17" R, 8.5" x 14" R


Power requirements Supplied from an external outlet

Dimensions 6.75" (W) x 26" (D) x 36.5" (H)


PI-504 Post Inserter

Structure Double paper feed unit (upper and lower)

Cover sheet paper types Normal paper: (16 to 24 lb.) Thick paper: (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)

Cover sheet paper sizes Upper tray: 8.5" x 11" /R to 5.5" x 8.5"/R Lower tray: 12 x 18 R and 11" x 17" R to 5.5" x 8.5"/R, Wide paper: Maximum 12.25" x 18 in

Paper capacity 200 sheets for both upper and lower trays


Power requirements Supplied from finisher



SF-602 Shift Tray

Paper types Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)

Paper sizes 11" x 17" R to 5.5" x 8.5"/R

Paper capacity 500 sheets of 8.5" x 14" or larger, 1,250 sheets of 8.5" x 11" paper, or 100 sheets of 5.5" x 8.5" or smaller



Power requirements 15.75" (W) x 23.5" (D) x 19" (H)

Weight Approx. 33 lb.


9


FK-502 Fax Kit (includes MK-716 Mount Kit)

Communication ECM/Super G3

Compatible Lines PSTN, PBSX/NCC, fax line (G3)

Line Density G3: R8 x 3.85, R8 x 7.7, R8 x 15.4, R16 x 15.4 (1/mm)

Modem Speed 2.4 kbps-33.6 kbps

Compression MH/MR/MMR/JBIG

Sending Paper Size Max. 11" x 17"

Recording Paper Size 11" x 17" to 5.5" x 8.5"

Transmission Speed Less than 3 sec. (V.34, JBIG)

Scan Speed 1 second (letter, fine mode)

Number of Abbr. 2,000

Number of Program Dial 400

Number of Group Dial 100 (500 destinations per group)

Sequential Multiple Max. 621 Station Transmission

FK-502 Fax Board

Function Supports two fax lines. One line can be set up to send and one line receive, or both can be set up to send.

IC-208 Image Controller

Type Internal Type

CPU Celeron-M 1 GHz/32-bit (Shared with the copier)

Memory 1,024 MB RAM (192 MB file memory)(Shared with the copier); 60 GB HDD (Shared with the copier)

Print Speed bizhub 751: 75 ppm bizhub 601: 60 ppm

Print Resolution 600 x 600 dpi/1,200 dpi (equivalent) x 600 dpi

PDL PCL5e/PCL6 (XL 3.0), PS3 Emulation (3016), XPS (XML paper specification)

Protocol TCP/IP (IPv4/IPv6), IPX/SPX, AppleTalk

Support OS Windows NT4.0 SP6, Windows 2000, Windows XP/x64, Windows Server 2003/Server x64, Windows Vista/Vista x64, Mac OS 9.2, OS X 10.2, 10.3, 10.4, 10.5*, Mac OS X (Intel-based) 10.4, 10.5*

Font PCL Resident Fonts: 80 outline PS3 Emulation Resident Fonts: 137 outline

* May not be available at the time of launch.


10


EK-703 Local USB Interface Kit

Type USB 2.0 Interface (mini-B plug).

Function Required for local USB printing.

HD-510 Hard Disk

Type Internal HDD

Capacity 60 GB

Functions Added File Memory, Scan-to-User Boxes, Print User Boxes.

SC-506 Security Kit

Type Embedded

Function Encrypts data stored on the MFP's hard disk drive

AU-101 Biometric Authentication Unit

Compatible Finger Width 1.1" (Top); 1.2" (Bottom)

Interface USB 2.0 requires WT-504 Working Table

Dimensions (W x D x H) 3.1"(W) x 3.7"(D) x 2.2"(H)

Weight 0.311 lb (not including USB Cable)

AU-201H HID Card Authentication Unit (IC Card Type)

Dimensions (WxHxD) 3.625" x 2.5" x 0.625"

Weight 0.25 lb.

Power Supply Supplied from USB Port

System Conditions Ambient Temperature: 32°to 104° F (operating mode) Humidity: 20% to 85%

System Conditions Ambient Temperature: -4°to 122° F (non-operating mode) Humidity: 20% to 85%

Radio Law Division Self-Guided Read-Write Communication Facility

Applicable Card ISO 14443 Type A, FeliCa-based non-contact IC Card

Acquired Standard VCCI Class B

Compatible Computer CPU: PC/T Compatible, 1 GHz or more Memory: 128 MB or more HDD: 100 MB or more free space Monitor: 800 x 600 pixels, 16-bit color or more Network: TCP/IP Application: Microsoft Internet Explorer 6.0 (SP1) or later

Microsoft .NET Framework (SP1) or later

MFP Compatibility bizhub 652, 552, 751, 601, 501, 423, 363, 283, 223, C652DS, C652, C650, C552DS, C552, C550, C452, C451, C360, C353, C280, C253, C220, C203. Please check MyKonicaMinolta.com on a regular basis for compatibility updates.

NOTE: WT-504 Working Table is recommended for AU-201H HID Proximity Card Authentication Unit.


11

AU-204H Magnetic Stripe Card Reader


Weight 4.5 oz.


System Conditions Ambient Temperature: 40˚ to 158˚ F (operating mode) Humidity: 10% to 90%

Transmit Frequency 3-60 i.p.s.

Certifications ISO 7810 and ISO 7811/AAMVA

Card Type Compatibility All magnetic stripe cards

MFP Compatibility bizhub 652, 552, 751, 601, 501, 423, 363, 283, 223, C652DS, C652, C650, C552DS, C552, C550, C452, C451, C360, C353, C280, C253, C220, C203. Please check MyKonicaMinolta.com on a regular basis for compatibility updates.

NOTE: WT-506 Working Table required for AU-204H Magnetic Stripe Card Reader.

AU-211P CAC/PIV Solution w/Certificate


Weight 0.13 Ibs.


System Conditions 0˚ to 122˚ F (operating mode)

Interface Full Speed USB (12 Mbps)

Connector Shape USB A Type Connector

Compatible Card PKI-C-Card (PIV, CAC)

MFP Compatibility bizhub 652, 552, 751, 601, 501, 423, 363, 283, 223, C652DS, C652, C552DS, C552, C452, C360, C280, C220. Please check MyKonicaMinolta.com on a regular basis for compatibility updates.

NOTE: WT-506 Working Table required. Please contact your local Government Account Manager for additional information.

WT-504 Working Table

Type External Table

Function Holds AU-101 Biometric Authentication Unit, AU-201H HID Authentication Unit, AU-204H Magnetic Stripe Card Reader and AU-211P CAC/PIV Solution w/Certificate when used with standing base; Can be used as place holder for originals and/or output



12

Copy Paper

Use paper that meets the following specifications:

Possible Custom-sized paper Sizes:

Paper Source Paper Width Paper Length

Bypass tray 3.938" to 12.313" 5.5" to 18"

Tray 3 and 4 7.188" to 12.375" 5.5" to 18"

LCU LU-405 10" to 12.25" 7.25" to 8.75"

LU-406 8.25" to 12.375" 7.688" to 18"

Double-sided copies 4.25" to 12.25" 5.75" to 18"

Possible Standard-sized Paper Sizes:

Paper Source Paper Size

Bypass tray 11" x 17" to 5.5" x 8.5"/R*1, 8.5" x 14"*1, F4*1, A3 to B6*1, A6

Tray 1 and 2 8.5" x 11" R, 5.5" x 8.5" R*1, A4 R, B5 R, A5 R*1

Tray 3 and 4 11" x 17" to 5.5" x 8.5" R*1, 8.5" x 11"*1/R, 8.5" x 14"*1, F4*1, A3 to A5 R*1

LCU LU-405 8.5" x 11" R, A4 R, B5 R

LU-406 11" x 17" to 8.5" x 11"*1/R, 8.5" x 14"*1, F4*1, A3 to A4/R

Double-sided copies 11" x 17" to 5.5" x 8.5" R*1, 8.5" x 14"*1, F4*1, A3 to A5 R*1

Finisher FS-524 Main tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Offset + Sort and Offset + Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Staple: 11" x 17" to 5.5" x 8.5" Punch: 11" x 17" to 5.5" x 8.5"/R and 8.5" x 14"*2 Sub tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4

Finisher FS-525 Main tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Offset + Sort and Offset + Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Staple: 11" x 17" to 5.5" x 8.5" Punch: 11" x 17" to 5.5" x 8.5"/R and 8.5" x 14"*2 Sub tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4

Finisher FS-610 Main tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Offset + Sort and Offset + Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Staple: 11" x 17" to 5.5" x 8.5", 8.5" x 14" and F4 Punch: 11" x 17" to 5.5" x 8.5"/R and 8.5" x 14" Sub tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 BM tray: Booklet (Half Fold and Fold & Staple settings): 11" x 17", 8.5" x 14", 8.5" x 11" Tri-Fold: 8.5" x 11"

Shift tray SF-602 11" x 17" to 5.5" x 8.5" R and 8.5" x 14"

Exit tray (standard) 11" x 17" to 5.5" x 8.5", 8.5" x 14"*1, F4*1, A3 to B6, A6 R

*1 Any of the following paper sizes can be selected from the Administrator Settings screen: A4 R or 8.5" x 11", A5 or 5.5" x 8.5", 8.5" x 14" or F4 Select one size from the four F4 sizes available. For details, contact your technical representative.

*2 Available only when the optional punch kit PK-505 or Z-Folding unit ZU-605 is installed.

Paper Types and Paper Capacities

Paper Type

Paper Source

Normal Paper Overhead Projector Transparencies

Trace Paper

Bypass tray 100 sheets 1 sheet 1 sheet

Tray 1 1,500 sheets (20 lb. paper) — —

Tray 2 1,000 sheets (20 lb. paper) — —

Tray 3 and 4 500 sheets (20 lb. paper) — —

LCU LU-405 4,000 sheets (20 lb. paper) — —

LU-406 4,000 sheets (20 lb. paper) — —

Double-sided copies

• — —

List of Recommended PaperPlain Paper Hammermill Tidal MP

Recycled Paper Hammermill Bond (8.5" x 11") Domtar Recycled Copy

Thick Paper Gilbert Color Copy (163 gsm) HM-Cover (65 lb.) HM-Laser Print (32 lb.)

Thin Paper Domtar (16 lb.)

Tracing Paper —

Label Paper Avery 5352 Avery 5160

OHP Transparencies 3M CG3700

Tab Paper Avery 7103 (8.5" x 11")

See KMBS Media Guide for the latest information regarding approved paper.


13

Special Paper

Paper other than Normal paper, such as overhead projector transparencies and colored paper, is called special paper. Be sure to select a special paper setting for paper tray loaded with media such as overhead projector transparencies and colored paper in order to prevent operating errors.

Paper Type Icon Description

Special Paper Select this setting when the paper that is loaded is from a particular manufacturer or special paper that is not usually used. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1

Thick Paper Select this setting when the thick paper that is loaded has a weight of 24.25 to 53.25 lb. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.

Thin Paper Select this setting when the Thin paper that is loaded has a weight of 13.25 to 15.75 lb. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1

OHP Select this setting when overhead projector transparencies are loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.

User 1 Select this setting when user paper 1 is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1



Tab Paper Select this setting when tab paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.

Recycled Select this setting when recycled paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1

Colored Paper Select this setting when colored paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1

Fine Select this setting when fine paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1

Labels Select this setting when label sheets are loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.

Letterhead Select this setting when the paper that is loaded is already printed with a company name or preset text and, therefore, should be differentiated from Normal paper. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.

Trace Select this setting when trace paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.

*1 User settings can be changed so that the paper type can be selected automatically.


14

Precautions for Paper

The following types of paper should not be used, otherwise decreased print quality, paper misfeeds or damage to the machine may occur.

• Overheadprojectortransparenciesthathave already been fed through the machine (even if the transparency is still blank)

• Paperthathasbeenprintedonbyaheat-transferprinter or an inkjet printer

• Paperthatiseitherextremelythickorextremelythin

• Folded,curled,wrinkled,ortornpaper

• Paperthathasbeenleftunwrapped for a long period of time

• Damppaper,perforatedpaper,orpaper with punched holes

• Extremelysmoothorextremelyroughpaper, or paper with an uneven surface

• Paperthathasbeentreated,suchascarbon-backed,heat-sensitive or pressure-sensitive paper

• Paperthathasbeendecoratedwithfoilorembossing

• Paperofanon-standardshape(notrectangular)

• Paperthatisboundwithglue,staplesorpaperclips

• Paperwithlabelsattached

• Paperwithribbons,hooks,buttons,etc.attached

Paper Storage

Observe the following precautions when storing the paper.

• Storepaperinacool,darklocationwithlittlehumidity.

• Ifthepaperbecomesdamp,papermisfeeds may occur. Paper that has not been loaded should be kept wrapped or placed in a plastic bag and stored in a cool, dark location with little humidity.

• Storethepaperlayingflat,notstandingonitsedge.Curled paper may cause paper misfeeds.

• Keeppaperoutofthereachofchildren.

Originals

When making copies, position the original into the ADF or on the original glass.

To copy original that cannot be positioned into the ADF, position them on the original glass.

Original That Can Be Positioned into the ADF

There are four methods for using the ADF.

• Normalmethod

• Fororiginalofmixedsizes

• ForZ-foldedoriginal

• Fororiginalontabpaper

There are limits on the types of original that can be positioned with each method.

Normal method

Single-Sided Original

Double-Sided Original

Original paper type/ Weight

Normal paper: 16 lb. to 24 lb.

Original size 11" x 17" R to 5.5" x 8.5"/R and 8.5 "x 14" R

Paper capacity 100 sheets (21.25 lb. paper)

For documents of mixed sizes

Single-Sided Original

Double-Sided Original

Original paper type/ Weight

13.25 lb. to 53.25 lb.

Original size Refer to “Mixed originals paper sizes”.



15

Mixed Original Paper Sizes

The following chart shows the possible combinations of standard-sized paper that can be used with the “Mixed Original” setting.

Maximum Document Width*1

11" x 17" 8.5" x 11" 8.5" x 14" 8.5" x 11" 5.5" x 8.5" 5.5" x 8.5"

Document Size*2

Landscape Portrait Landscape Landscape Portrait Landscape

11" x 17" (Landscape)

8.5" x 11" (Portrait)

8.5" x 14" (Landscape)

8.5" x 11" (Landscape)

5.5" x 8.5" (Portrait)

5.5" x 8.5" (Landscape)

Possible Not Possible*1 Indicates the width of the widest original size of the mixed originals (width of the adjustable original guides of the ADF) *2 Indicates original sizes that can be specified together with the maximum original width

For Z-folded DocumentsSingle-Sided Documents

Original Paper Type/ Weight

Normal paper: 16 lb. to 24 lb., thick paper: 24.25 lb. to 53.25 lb., thin paper: 13.25 lb. to 15.75 lb.

Original size 11" x 17", 8.5" x 14", 8.5" x 11"/R, 5.5" x 8.5"/R, A3, B4, A4, B5/R, B6 R


Note: Z-folded original can only be scanned using the ADF.

Original that can be placed on the Original Glass

To copy original that cannot be positioned into the ADF, position them on the original glass.

Original Glass Original

Original type Sheets, books (spreads), three-dimensional objects

Original size 11" x 17" R to 5.5" x 8.5"/R A3 R to B6 R

Maximum weight 15 lb.

Precautions for Positioning Original into the ADF

The following types of original should not be positioned into the ADF, otherwise paper misfeeds or damage to the original may occur.

• Wrinkled,folded,curled,ortornoriginal

• Highlytranslucentortransparentoriginal,suchas overhead transparencies or trace paper

• Coatedoriginalsuchascarbon-backedpaper

• Originalprintedonpaperthickerthan53.25lb.

• Originalprintedonpaperthinnerthan13.25lb.

• Originalprintedonpaperthickerthan29.5lb.duringdouble-sided copying

• Originalthatarebound,forexample,withstaplesor paper clips

• Originalthatareboundinabookorbooklet

• OriginalthatareboundtogetherwithGlue

• Originalpagesthathavebeencutorcontaincutouts

• Labelsheets

• Offsetprintingmasters

• Originalwithbinderholes

• Originalthathavejustbeenprintedwiththismachine

REMINDER: Before positioning folded original, such as those folded in half or in three, into the ADF, be sure to flatten the pages.


16

IC-208 SpecificationsItem Specifications

Model Built-in print controller

Power Supply Common with the main body

Processor Speed Celeron-M 1 GHz/32-bit (shared with copier)

Memory 1,024 MB RAM (192 MB file memory) (shared with copier); 60 GB HDD (shared with copier)

Interface Ethernet port (1000Base-T/100Base-TX/ 10Base-T)

Frame Type Ethernet 802.2, Ethernet 802.3, Ethernet II, Ethernet SNAP

Supported Protocols TCP/IP, IPX/SPX, NetBEUI, AppleTalk (EtherTalk)

Print Speed bizhub 751 : 75 pages/minute bizhub 601 : 60 pages/minute (A4 600 x 600 dpi)

First Print Time Same as the first copy time of the main body

Page Description Language

PCL5e/PCL6 (XL 3.0), PS3 Emulation (3016), XPS (XML paper specification) Ver. 1.0

Operating Environment Conditions

Same as in the main body

Resolution Data 600 x 600 dpi (Print and Fax function) 400 x 400 dpi (Fax function) 200 x 200 dpi (Fax function)

Printing 1200 (equivalent) x 600 dpi

Supported Paper Sizes

Same as in the main body

Printer Fonts PCL Latin 80 Fonts Postscript 3 Emulation Latin 137 Fonts

Compatible Computers

IBM PC compatible, Macintosh (PowerPC or Intel processor)

Printer Driver

Konica Minolta PCL Driver (PCL driver)

32 bit editions Windows NT Workstation 4.0/Server 4.0 (Service Pack 6 or later) Windows 2000 Professional/Server (Service Pack 3 or later) Windows XP Home/Professional (Service Pack 2 or later) Windows Server 2003 Standard Windows Vista (All versions) Windows Server 2008 Windows 7

64 bit editions Windows XP Professional (Service Pack 2 or later) Windows Server 2003 Windows Vista (All versions) Windows Server 2008 Windows 7

Item Specifications

Printer Driver (cont.)

Konica Minolta PostScript Driver (PS driver)

32 bit editions Windows 2000 Professional/Server (Service Pack 3 or later) Windows XP Home/Professional (Service Pack 2 or later) Windows Server 2003 Standard Windows Vista (All versions) Windows Server 2008 Windows 7


PostScript PPD driver (PS-PPD)

Mac OS 9.2 or later, Mac OS X 10.2, Mac OS X 10.3, or Mac OS X 10.4, or Mac OS X 10.5*

Fax Driver 32 bit editions Windows NT Workstation 4.0/Server 4.0 (Service Pack 6 or later) Windows 2000 Professional/Server (Service Pack 3 or later) Windows XP Home/Professional (Service Pack 2 or later) Windows Server 2003 Standard Windows Vista (All versions) Windows Server 2008 Windows 7


Utility PageScope Web Connection Compatible Web browsers: Microsoft Internet Explorer Ver. 6 or later recommended (JavaScript and Cookies enabled) Microsoft XML parser MSXML3.X must be installed when Internet Explorer Ver. 5.5 is being used. Netscape Navigator Ver. 7.02 or later (JavaScript and Cookies enabled) Mozilla Firefox Ver. 1.0 or later (JavaScript and Cookies enabled) Adobe® Flash® (Plug-in Ver. 7.0 or later required if "Flash" is selected as the display format)

Operating Environment for MetaFrame

The operation of this driver has been confirmed only in the following environments. Server OS: Windows 2000 Advanced server/ Windows 2003 Enterprise Server MetaFrame: Citrix® MetaFrame® Presentation Server 3.0, Citrix® MetaFrame® Presentation Server 4.0 Client OS: Windows 2000/Windows XP ICA Client: ICA32 bit NOTE: For operating in an environment other than those described, contact your service representative.

* May not be available at time of launch.


17

Scanning Function (Standard)

Type Monochrome Image Scanner

Scanning Size 5.5" x 8.5" to 11" x 17"

Scanning Resolution 600/400/300/200 dpi

Scanning Speed 75 opm (8.5" x 11" (600 dpi ))

Main Function Scan-to-Email, Scan-to-Box (HDD) (Requires opt. HDD), Scan-to-FTP, Scan-to-SMB (Desktop Folder), Scan-to-WebDAV, Scan-to-USB Memory, Scan-to-SharePoint, WS-Scan, Network TWAIN, HDD TWAIN (via Ethernet TCP/IP)

Interface Ethernet 100BaseTX/100BaseT/1000BaseT

Protocol TCP/IP (FTP, SMTP, HTTP, SMB)

Support OS Windows NT4.0 SP6, Windows 2000, (Driver) Windows XP, Windows Server 2003,

Windows Vista, Windows 7

Output Format TIFF, PDF, XPS, Encrypted PDF

Driver TWAIN

Address Setting LDAP, Import/Export address from PageScope Web Connection

Authentication Authentication in sending Email, Network User Authentication

*Text and image scanning speeds vary depending on the type of document.

Network & Device ManagementNetwork & Device ManagementPageScope Net CarePageScope NDPS GatewayPageScope EMS Plug-InsPageScope Network SetupPageScope Data AdministratorDriver Packaging UtilityHDD Back Up UtilityLog Management Utility User ToolsPageScope Web ConnectionPageScope Direct PrintPageScope Box OperatorPageScope Print Status NotifierFont Management UtilityPrint Utility for Unix

Management Toolbizhub vCare Support Optional Software PageScope WorkwarePageScope Enterprise Suite– PageScope Account Manager– PageScope Authentication Manager– PageScope My Print Manager– PageScope My Panel Manager– PageScope Net Care Device Manager (Standard)

Security

Because information assets are critical, a company needs to effectively protect against the many security risks it faces.

1) Prevent leaks of proprietary, confidential or personal information 2) Prevent unauthorized use of equipment 3) Effective data encryption 4) Protect data from being altered, duplicated or deleted 5) Prevent unauthorized access to data via the Internet 6) Protect against cyber attacks 7) Manage log history

Protective Functions: •HDDSanitizing(whendisposingofmachine) •DeleteGraphicData(aftereachjob)JobErase •LockJob(whenprintingconfidentialdocuments) •Protectdatabyrequiringdepartmentname and 8-digit password •AccountTrack •HDDLock •PreventUnauthorizedUse •OperationLogwith2,000-eventmemory •HDDEncryption •PDFScanEncryption •EncryptedNetworkPasswordPrinting •NetworkAuthentication •Scan-to-USBMemoryw/UserAuthentication •PrintfromUSBMemoryw/UserAuthentication •BiometricUserAuthentication •SMTPAuthenticationforEmail •SSL/TSLCompatibilityforPSWebConnection,PSData •AdministratorandLDAPServer •S/MIMEEncryption •ScanDataEncryption(TCP/socketSSLCompatibility) •BoxOperatorDataEncryption •VerificationofBoxDataReceipt • IPAddressFiltering •DetailedSecurityLogs •AU-201HHIDAuthentication •AU-204HMagneticStripeCardReader •AU-211PCAC/PIVSolutionwithCertificate


18

02/2011

How to Build a System for the bizhub 751/601 Printer/Copier/Scanner (from start to finish)

Ste

p 5

: A

dd

itio

nal

Op

tion

s

H

D-5

10

60 G

B H

ard

Dis

k D

rive

(F

or e

nhan

ced

copy

, pr

int

and

scan

func

tions

)

S

C-5

06

HD

D E

ncry

ptio

n K

it

W

T-50

4 W

orki

ng T

able

A

U-1

01 B

iom

etric

Aut

hent

icat

ion

Uni

t

(Req

uire

s W

T-50

4)

E

K-7

03

US

B In

terf

ace

Kit

A

U-2

01H

H

ID C

ard

Aut

hent

icat

ion

Uni

t

A

U-2

04H

M

agne

tic S

trip

e C

ard

Rea

der

(R

equi

res

WT-

506)

A

U-2

11P

C

AC

/PIV

Sol

utio

n

(Req

uire

s W

T-50

6)

Sta

rt:

b

izh

ub

75

1/6

01

Base

Un

it

Com

es s

tand

ard

with

: Dru

m, (

1) D

evel

oper

, A

DF,

1,0

24 M

B m

emor

y, T

ray

1 (1

,500

she

ets)

, Tr

ay 2

(1,0

00 s

heet

s), T

ray

3 (5

00 s

heet

s),

Tray

4 (5

00 s

heet

s), B

ypas

s (1

00 s

heet

s).

Tota

l sta

ndar

d pa

per

capa

city

: 3,6

00 s

heet

s

(7,6

00 m

ax.)

Ste

p 1

: P

ap

er

Su

pp

ly O

pti

on

s

LU

-405

La

rge

Cap

acity

Cas

sett

e

(4,0

00 s

heet

Let

ter

Por

trai

t)

LU

-406

La

rge

Cap

acity

Cas

sett

e

(4,0

00 s

heet

to

12"x

18")

Ste

p 2

a:

Ou

tpu

t O

pti

on

s

(One

of t

he fo

llow

ing

is r

equi

red)

S

F-60

2 S

hift

Tra

y

FS

-524

M

ulti-

Sta

plin

g Fi

nish

er

(Mul

ti-po

sitio

n S

tapl

ing

up t

o 50

she

ets)

FS

-525

M

ulti-

Sta

plin

g Fi

nish

er

(Mul

ti-po

sitio

n S

tapl

ing

up t

o 10

0 sh

eets

)

FS

-610

A

dva

nced

Fol

din

g Fi

nish

er

(Mul

ti-po

sitio

n S

tapl

ing,

Sad

dle-

Fold

Stit

ch,

Tri-

Fold

)

Ste

p 2

b: A

dd

itio

nal

Ou

tpu

t O

pti

on

s

P

I-50

4 C

over

Inse

rter

(P

ost

Engi

ne C

over

Inse

rter

)

P

K-5

05

Hol

e P

unch

Kit

(S

elec

tabl

e 2/

3-ho

le p

unch

)

Z

U-6

05

Z-F

old

/Pun

ch K

it

(Add

s Z-

fold

and

sel

ecta

ble

2/3-

hole

pun

ch)

Ste

p 3

: C

on

trolle

r O

pti

on

IC

-208

Im

age

Con

trol

ler

(Req

uire

d fo

r pr

intin

g)

Ste

p 4

: A

nalo

g F

ax

Op

tion

s

FK

-502

Fa

x K

it (In

clud

es M

K-7

16 M

ount

Kit)

FK

-502

Fa

x B

oard

(Req

uire

d fo

r 2n

d fa

x lin

e)

IC-2

08 Im

age

Con

trol

ler

500

PK

-505

FS-6

10

LU-4

05

FK-5

02

LU-4

06

60 G

B H

DD

Kit

WT-

504

Wor

king

Tab

le

EK

-703

Lo

cal I

nter

face

Kit

AU

-201

H H

ID C

ard

Aut

h. U

nit

AU

-204

H

Mag

netic

Str

ipe

Car

d R

eade

r

AU

-211

P C

AC

/PIV

Sol

utio

n

AU

-101

Bio

met

ric A

uth.

Uni

tS

C-5

06

HD

D E

ncry

ptio

n K

it

PI-

504

ZU-6

05

1

FK-5

02 F

ax K

it

SF-

602

FS-5

25 F

S-5

24

2 4

500

1,000

1,500

4,000

Lett

er/

Po

rtra

it

4,000

12"x

18"

3

How to Build a System for the bizhub 751/601 Printer/Copier/Scanner (from start to finish)


19

02/2011

Accessory Options for 751/601 Printer/Copier/Scanner

ACCeSSOrieS item NO. DeSCriPtiON NOteS

BASe UNitbizhub 751 A0PN011 751 Digital Printer/Copier/Scanner/Fax Includes: Drum, (1) Developer, DF-614, Duplex Unit, 1,024 MB memory (max.);

bizhub 601 A0PP011 601 Digital Printer/Copier/Scanner/Fax Tray 1 (1,500 sheets), Tray 2 (1,000 sheets), Tray 3 (500 sheets), Tray 4 (500 sheets), Bypass (100 sheets) and PC Drum. Requires AC120V, 16A (NEMA receptacle 5-20R).

DOCUmeNt HANDliNgDF-614 — Reversing Document Feeder (Standard) 100 sheet capacity. Up to 75 opm.

OUtPUt OPtiONSFS-524 A0R10Y1 Multi-Stapling Finisher Sorting and Multi-position stapling up to 50 sheets.

FS-525 A0R20Y1 Multi-Stapling Finisher Sorting and Multi-position stapling up to 100 sheets.

FS-610 A0R30Y1 Advanced Folding Finisher Multi-position stapling, tri-fold, half-fold, saddle stitch booklets.

SF-602 A0PX0Y1 Shift Tray Offset stacker (up to 1,250 sheets – 8.5"x11").

PI-504 A0PV0Y1 Post Engine Cover Inserter Add pre-printed covers and post-process staple, fold, punch.

PK-505 15US Punch Kit Adds 2/3-hole punch.

ZU-605 A0R00Y1 Z-Fold/Punch Kit Adds Z-fold and selectable 2- and 3-hole punch.

PAPer SUPPly OPtiONSLU-405 A0PR0Y2 Large Capacity Cassette 4,000 sheets (20 lb. bond) of letter portrait.

LU-406 A0PT0Y2 Large Capacity Cassette 4,000 sheets (20 lb. bond) up to 12"x18".

ADDitiONAl OPtiONSHD-510 A0P7WY1 60 GB HDD Kit Required to support Scan-to-HDD and other functions.

See bizhub 751/601 Product and Sales Guide for details

EK-703 A0P4WY1 Local Interface Kit Required for local USB printing.

SC-506 A0PCWY1 HDD Encryption Kit Encrypts all data stored on the hard disk drive and provides encryption priority and overwrite priority selections.

AU-101 A09MWY0 Biometric Authentication Unit Compatible with C650, C550, C451, C353, C253, C203 and 501, 421, 361.

WT-504 A0PWWY1 Working Table Required for AU-101 Biometric Authentication Unit.

AU-201H 7640005064 HID Card Authentication Unit Compatible with C650, C550, C451, C353, C253, C203 and 501, 421, 361.

AU-204H 7640013468 Magnetic Stripe Card Reader Requires WT-506 Working Table.

AU-211P 7640008082 CAC/PIV Solution with Certificate Requires WT-506 Working Table. Contact your local Government Account Manager for information.

CONtrOller OPtiONIC-208 A0P90Y1 Image Controller Adds PCL5e/PCL XL v.3.0/PS3 (3016) Emulation,

XPS (XML page specifications) printing capability.

FAx OPtiONSFK-502 Kit A0PNX001 FK-502 Fax Kit 33.6 Kbps faxing. Includes MK-716 Mount Kit.

FK-502 15LB Fax Board Required for 2nd fax line.

CONSUmABleS yielDS*

CONSUmABle item NO. DeSCriPtiON yielD

TN-710 02XJ Toner 55,000 @ 6%*

DR-710 02XL Photo Receptor 500,000

DV-710 02XK Developer 250,000

SK-602 14YK Staples for FS-524 5,000 (x3)

MS-5C 4448121 Staples for FS-610 5,000 (x3)

MS-10A 4599141 Staples for FS-525 5,000 (x3)

PM Parts Kit DA0PNPM25 PM Parts Kit 250,000

* Yields based on industry standard 6% page coverage.

Accessory Options for bizhub 751/601 Printer/Copier/Scanner

Bizhub 751 601 Spec and Install Guide

Documents

Transcript of Bizhub 751 601 Spec and Install Guide