Bioprofuelsaver presentaion ipoc2014 PT Noor Amalindo

32
Dr. Ir. Ishenny Mohd Noor Inventor

Transcript of Bioprofuelsaver presentaion ipoc2014 PT Noor Amalindo

Dr. Ir. Ishenny Mohd Noor

Inventor

• With rising fuel cost, the drive to seek alternative fuel to generate energy becomes more important daily.

• Cost of fuel oil and nature gas will increase and availability will worsen. • Therefore, alternative methods using biomass waste, such as Empty

Fruit Branch (EFB), Palm kernel shell, rice hash, wood chips rubber wood etc to generate energy will become the standard for near future.

• To implement BFS Boiler Additive to boiler feed is the new method to remove black smoke on the stack of palm oil mill.

1. Fireside Corrosion and fouling – high temperature zone.Almost all the fuel that we use to generate the energy consists of carbon chains and trace level of complex organic compound of Vanadium, sodium and sulfur. These elements will post fireside corrosion in either high temperature zone or low temperature zone. Upon combustion, these elements forms LOW MELTING ASH DEPOSIT and build up in various area in the boiler, such as furnace wall, tubes, supports hangers, super-heaters etc. This deposit will insulate the generating tubes, impedes heat transfer and subsequently cause failure of the boiler

2. Boiler Slagging – fouling and formation of slag and clinkerSlag and Clinker formation in the boiler were due to the low melting point of the ash deposit. Most of the time, deposit and corrosion will take place in the same time due to the reaction of the organic compound of vanadium, sulfur and sodium ions

3. Air pollution – Acid smut and emission of SO2When flue gas temperature approaches the acid dew point and condensation occurs in the dust collectors and boiler stack, ash particles agglomerate and some pass out the stack and polluted the surrounding area. Acid smut and carbon black particles are highly corrosive to the any metal in contact.

as an additive to the biomass fuel, its reacts with the ash which have very high fusiontemperatures as high as 1480°C, depending upon the product to EFB weight ratio

Increase the efficiency of the boiler by reduce the deposit formation, lower corrosion thehigh and low temperature zone and reduce acid smut fall out from the boiler stack

help in the combustion by increase the potential energy with oxidation catalysts and postcombustion area to reduce slag, fouling, corrosion and acid smut fallout problems

eliminated Fireside corrosion and fouling by changing the characteristics of the ash. Theash becomes dry, friable and non-corrosive. With the products complex formation is in alkalinerange, the corrosion in the high temperature zone is reduced.

maintain design steam temperature with much lower excess air. In many cases, whenboiler steam temperature has been low after conversion to fuel firing, it has been the practiceto operate the boiler with high excess air in order to increase mass flow and maintaintemperature

It Contains NO Diesel. Raw Material Is A 100% Unwanted Waste From Palm Oil Mill

Industry. It Is A Total Diesel Replacement. Engine Modification Is Not

Needed. It Is Based On Enzymatic Process. Thus The Process Is At

Low/Ambient Pressure And Temperature. It Is Super Clean and Rated Better Than Euro 2m And 4m Standard. It Has Successfully Been Tested On A Commercial Diesel Engine.

Before Applied After Applied

Before Applied After Applied

1. Flame of BFS at Boiler

2. Fireman feeding of fibre blended with palm shell into boiler

3. Feeding BFS at screw-mixer at top feeder of boiler

4. Black smoke disappear from stack after feeder with BFS

Best Biotechnology Award

Recognition from Japan Intellectual

Property Association (JIPA), Gold

Medal Award, Silver Medal Award in

Malaysian Technology Expo (MTE)

2013 at Putra World Trade Centre

(PWTC), Kuala Lumpur, Malaysia.

Gold Medal Award, Bronze Medal

Award, Diploma Certificate in

International Trade Fair Exhibition

(IENA) 2012, at Nuremberg,

Germany.

Gold Medal Award in International

New Product Invention Exposition

(INPEX) 2013, at Pittsburgh, USA.

Gold Medal Award in International

Technology Invention Expo

(ITEX) 2012, at KLCC, Malaysia.

Gold Medal Award in International

Technology Innovation and

Invention Expo (ITEX) 2013, at

KLCC, Malaysia.

Gold Medal Award in International

Malaysian Technology Expo

(MTE) 2013, at PWTC, Malaysia.

Double Gold Award (Special Award) and Gold Medal Award in British Invention Show (BIS) 2013, at Barbican Exhibition

Centre, London.

Gold Award in Seoul International Invention Fair (SIIF) 2013, at COEX

Hall, Seoul, Korea.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Publicity on Media Newspaper

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Biopro Fuel Saver Products

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Diesel Additive for lorry=RM70

Boiler Additive=RM30

Car=RM7

Motor=RM5

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Plant Fat-Slurr from POME, EFB, Fibre and Rubbish

Fat-Slurr Plant 30 ton FFB/HInvestment =11.5 Millions exclude steam utility.Products: Fat-Slurr=7,200 Ton/Y

Fertilizer=9,000 Ton/YAnimal feed=36,000 Ton/Y

Total Revenue =RM10.7 Millions/YProfit before tax: RM 8 Millions/YROI = 1.5 Years.

Fat-Slurr Plant 60 ton FFB/HInvestment =19.8 Millions exclude steam utility.Products: Fat-Slurr=14,400 Ton/Y

Fertilizer=18,000 Ton/YAnimal feed=72,000 Ton/Y

Total Revenue =RM21.4 Millions/YProfit before tax: 16 Millions/YROI = 1.3 Years.

Fat-Slurr Plant 120 ton FFB/HInvestment =36 Millions exclude steam utility.Products: Fat-Slurr=28,800 Ton/Y

Fertilizer=36,000 Ton/YAnimal feed=144,000 Ton/Y

Total Revenue =RM42.8 Millions/YProfit before tax: RM 32 Millions/YROI = 1.1 Years.

Profitability analysis

Business Model

Joint venture 60%:40% PT. Noor Amalindo (Indonesia) or BPGM (Malaysia)

Operator plant by PT Noor Amalindo (Indonesia) and hand over after 5 years to Palm oil mill owner.

Design and built by PT. Noor Amalindo (Indonesia)Financial 100% by Palm oil ownerFat Slurr Plant belong to Palm oil mill ownerRoyalty RM50 per Ton for all products have to pay to inventor every month.

Conclusion

• Biopro Fuel Saver is an alternative energy using Advanced Biofuel Technology (Zero waste technology).

• Biopro Fuel Saver produces from palm oil industry waste.• Biopro Fuel Saver is proportional to the increase of raw

material sources by population increase (Unlimited sources).

• Biopro Fuel Saver is environmental friendly.• Biopro Fuel Saver is to clean engine diesel.• Biopro Fuel Saver is powerful compared to diesel.• Biopro Fuel Saver is workable and profitable.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Thank you

POME = 1% oil losses

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Empty Fruit Bunches = 2.00% Oil losses

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Rubish = 0.5% oil losses

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.

Fibre = 0.5% oil losses

Biopro Petrol Global Marketing Sdn. Bhd. Copyright Reserved.