ORBITbionica.bio/doc/Catalogo BIONICA.pdf · 2021. 2. 15. · 6 Length Art.-No. 4 mm OT6004 6 mm...
Transcript of ORBITbionica.bio/doc/Catalogo BIONICA.pdf · 2021. 2. 15. · 6 Length Art.-No. 4 mm OT6004 6 mm...
1
Easy system concept ®ORBITAmazing implant system with positionable abutment from 0° to 30 ° on 360° of revolution
INTERNATIONAL PATENT WIPO|PCT
2
®ORBIT BIONICA® implant system is designed to facilitate daily work.A design that provides confidence and immediacy, it can be used in all types of bone thanks to the modulation of the milling protocols. It guarantees primary stability in all situations and immediate loading is possible.Easier prosthetic: LEM Abutment positionable from 0° to 30° on 360° of revolution.The LEM can be paralyzed directly in the oral cavity.Single connection for all diameters and easy management.On top of the LEM can have a conometric or screw-retained prostheses.More biology: Transgingival implant with a convergent shaped neck that creates more space to allow biological amplitude and hard-soft tissue stability. More mechanical resistance:Not having the implant cavity increases mechanical resistance to an unprecedented level.
THE POWER OF CHANGEAn extreme implant system with new technology is born:-Easier prosthetics-More biological-More mechanical resistanceAn implant system dedicated to all professionalswho want to stretch the limits of possibility
3
Packaging
Container completely manufactured in titanium to avoid contamination of the im-plant with other materials.The container and it’s lid are completely recyclable and protected by a hermetically sealed blister in the box.The screw-top lid is part of the and can be removed with the purpose screwdriver which separates it with a slight rotatory movement.
Why is it more resistant ?
In the picture you see the structural difference between ORBIT Ø 2.7 mm diameter on the left and a common dental implant Ø 2.7 mm with an internal connection to the right. ORBIT has a solid implant body while other implants by necessity have a cavity to house the various abutments which weakens the sides.As a result of this connection system the Orbit range starts with a diameter of 2.4mm with a superior mechanical resistance to the current biphasic implant systems. Orbit Ø 2.7 Standard Implant Ø 2.7
4
TiDAE SurfaceThe superficial treatment used for the endo-osseous part of the implant is based on Double Acid Etching. The final clean with glow discharge plasma leaves the surface homogenous and without residue.
TiDAE Surface treatment
Static and dynamic loading tests in according to ISO 14801
ORBIT passed the static mechanical strength test with an average load of 1322 N.
ORBIT passed the fatigue strength test with a 400 N for 5.000.000 cycles.
Superficial topographyThis technique allows the ability to get a topography of the external layers to a depth of about 8 nanometres (nm) for optimal os-seo-integration.
Characteristics of the anodised coronal portionThe coronal part of the ORBIT implant undergoes a process of anodization to give it a gold colour which is aestehically advantageous. This layer, naturally present on each titanium component, when exposed to the atmosphere is created by oxygen on the titanium. It usually measured about 3-4 nm and is transparent. The growth of this layer until a thickness comparable to the wavelength of light causes optical phenomena. Depending on the thickness of this layer, the optical effect creates defined colours without needing addi-tional materials or coverings.
5
Diameter Apex Core Sphere Length
Ø 2,4 Ø 2,0 Ø 1,4 Ø 4 mm 8 mm 10 mm 11,5 mm 13 mm 15
Ø 2,7 Ø 2,0 Ø 1,,4 Ø 4 mm 8 mm 10 mm 11,5 mm 13 mm 15
Ø 3,2 Ø 2,72 Ø 1,6 Ø 4 mm 8 mm 10 mm 11,5 mm 13 mm 15
Ø 3,7 Ø 2,8 Ø 1,6 Ø 4 mm 4 mm 6 mm 8 mm 10 mm 11,5 mm 13 mm 15
Ø 4,3 Ø 3,4 Ø 1,9 Ø 4 mm 4 mm 6 mm 8 mm 10 mm 11,5 mm 13 mm 15
Ø 5,0 Ø 3,9 Ø 2,5 Ø 4 mm 4 mm 6 mm 8 mm 10 mm 11,5 mm 13 mm 15
Ø 6,0 Ø 4,8 Ø 3,2 Ø 4 mm 4 mm 6 mm 8 mm 10 mm 11,5 mm 13
Sphere
Core
Lenght
Apex
0.85Diameter
Orbit diameters and lengths
The special spherical connection that creates a 1.0 mm mucosal passage must be taken into con-sideration for the conditioning of soft tissues and the choice of the LEM abutment.
Soft tissue management
1.02.5 LEM1
4.0 LEM31.0
1.0 LEM0
2.3
Note:All ORBIT fixture should be inserted with max 65 Ncm torque.
6
Length Art.-No.4 mm OT6004
6 mm OT6006
8 mm OT6008
10 mm OT6010
11.5 mm OT6011
13 mm OT6013
Length Art.-No.8 mm OT2408
10 mm OT2410
11.5 mm OT2411
13 mm OT2413
15 mm OT2415
Product Platform Image MaterialORBIT dental implantØ 2.7 mm
Sphere Ø 4 mm Ti gr. 4
Length Art.-No.8 mm OT3208
10 mm OT3210
11.5 mm OT3211
13 mm OT3213
15 mm OT3215
Product Platform Image MaterialORBIT dental implantØ 3.2 mm
Sphere Ø 4 mm Ti gr. 4
Length Art.-No.4 mm OT3704
6 mm OT3706
8 mm OT3708
10 mm OT3710
11.5 mm OT3711
13 mm OT3713
15 mm OT3715
Product Platform Image Material
ORBIT dental implantØ 3.7 mm
Sphere Ø 4 mm Ti gr. 4
Length Art.-No.4 mm OT4304
6 mm OT4306
8 mm OT4308
10 mm OT4310
11.5 mm OT4311
13 mm OT4313
15 mm OT4315
Product Platform Image MaterialORBIT dental implantØ 4.3 mm
Sphere Ø 4 mm Ti gr. 4
Product Platform Image Material
ORBIT dental implantØ 2.4 mm
Sphere Ø 4 mm Ti gr. 4
Product Platform Image Material
ORBIT dental implantØ 5.0 mm
Sphere Ø 4 mm Ti gr. 4
Length Art.-No.4 mm OT5004
6 mm OT5006
8 mm OT5008
10 mm OT5010
11.5 mm OT5011
13 mm OT5013
15 mm OT5015
Product Platform Image MaterialORBIT dental implantØ 6.0 mm
Sphere Ø 4 mm Ti gr. 4
Length Art.-No.8 mm OT2708
10 mm OT2710
11.5 mm OT2711
13 mm OT2713
15 mm OT2715
®ORBIT
7
Drilling sequence
Until fixture length Optional Drill Until second mark
AttentionWhen placing a ORBIT fixture in soft bone (D IV) the surgeon should consider undersizing osteotomy.The final drill diameter should be limited to the one immediately smaller than the diameter that should have been used.When placing an ORBIT fixture in hard bone (D I) do not underpre-pare the osteotomy site.The surgeon should consider to use as final drill diameter the one immediately bigger than the diameter that should have been used, stopping at the second laser mark. This will create an osteotomy of proper dimension in the dense cortical bone without any under-preparation.
Ø6.0Only Soft Bone
Soft Bone
Dense BoneØ5.0
Soft Bone
Dense BoneØ2.7
Soft Bone
Dense BoneØ3.2
Soft Bone
Dense BoneØ3.7
Soft Bone
Dense BoneØ4.3
Soft Bone
Dense BoneØ2.4
Ø2.0 Ø2.4 Ø2.8 Ø3.2 Ø3.8 Ø4.5 Ø5.5Ø1.5
Ø2.1 Ø2.1 Ø2.7 Ø3.2 Ø3.7
4 mm
6 mm
8 mm
10 mm11.5 mm13 mm
15 mm
18 mm
0 mm
Sleeve Stop
Sleeve stopdrill
Bone millto prepare the bone in cases where it is necessary to sink the spherical part of the fixture.
0 mm2 mm
3 mm4 mm
Ø0.0 Ø1.5 Ø2.0
8
ORBIT ZYGO
Length Art.-No.26 mm OZ3526
28 mm OZ3528
30 mm OZ3530
35 mm OZ3535
37.5 mm OZ3537
40 mm OZ3540
42.5 mm OZ3542
45 mm OZ3545
47.5 mm OZ3547
50 mm OZ3550
52.5 mm OZ3552
55 mm OZ3555
57.5 mm OZ3557
Product Platform Image MaterialORBIT ZYGO Ø 3.5 mmZygomatic ImplantApical portion threaded with 0.6mm pitch
15mm long and 10mm tidae surface treatment
Sphere Ø 4 mm Ti gr. 4
NASAL - PTERYGOIDLength Art.-No.
18 mm OT3218
20 mm OT3220
22 mm OT3222
24 mm OT3224
26 mm OT3226
Product Platform Image MaterialORBIT dental implantØ 3.2 mm
Sphere Ø 4 mm Ti gr. 4
Length Art.-No.18 mm OT3718
20 mm OT3720
22 mm OT3722
24 mm OT3724
26 mm OT3726
Product Platform Image Material
ORBIT dental implantØ 3.7 mm
Sphere Ø 4 mm Ti gr. 4
Zygomatic implants Ø3.5 mm LEM Abutment positionable from 20° to 70°The LEM can be paralyzed directly in the oral cavity.
Product Image Description Material Art.-No.
LONG STRAIGHT DRILL Ø 2.0 Nasal Pterygoid straight drill Ø 2.0 AISI630 FDN20
LONG STRAIGHT DRILL Ø 2.4 Nasal Pterygoid straight drill Ø 2.4 AISI630 FDN24
®ORBIT
9
Note:All LEM abutments should be inserted with 45Ncm torque for bridges and extended work. 65Ncm for single implants.
The special feature of the spherical connection that creates a 1.0 mm mucous passage must be taken into consideration for the modeling of soft tissues and the choice of the LEM abutment.
Soft tissue management
1.02.5 mm
LEM1
4.0 mm
LEM3
1.01.0 mm
LEM0
Product Front Persp. Description Material Art.-No.LEM-ABUTMENT 1.0with PROBE-SCREW
Abutment for conometric and screw prostetic Ø 4.13 mm h 4.6 mm gingiva height 1.0 mm with Probe-screw
Ti gr. 5 LEM0
LEM-ABUTMENT 2.5 with PROBE-SCREW
Abutment for conometric and screw prostetic Ø 4.13 mm h 6.1 mm gingiva height 2.5 mm with Probe-screw
Ti gr. 5 LEM1
LEM-ABUTMENT 4.0 with PROBE-SCREW
Abutment for conometric and screw prostetic Ø 4.13 mm h 7.6 mm gingiva height 4.0 mm with Probe-screw
Ti gr. 5 LEM3
PROBE-SCREW M2 Abutment screw for LEM Ti gr. 5 PRO
M2.0
4,9°
10
Product Front Persp. Description Material Art.-No.IMPRESSION COPING CLOSE TRAY LEM transfert closed tray Ti gr. 5 TCC
IMPRESSION COPING OPEN TRAY LEM transfert open tray with screw Ti gr. 5 TCA
Product Front Persp. Description Material Art.-No.
SCAN BODY LEM Digital abutment sandblasted for LEM Ti gr. 5 MSD
Product Front Persp. Description Material Art.-No.HEALING COVER LEM H0.0 Cover screw for Orbit in PEEK Peek HC0
HEALING COVER LEM H5.4 Cover LEM ⌀ Ø 5.2 mm, gingiva height 5.4 mm
Ti gr. 5 HC1
HEALING COVER LEM H6.7 Cover LEM ⌀ Ø 5.2 mm, gingiva height 6.7 mm
Ti gr. 5 HC3
HEALING COVER LEM LARGE H5.4 Cover LEM ⌀ large Ø 5.6 mm, gingiva height 5.4 mm
Ti gr. 5 HCS1
HEALING COVER LEM LARGE H6.7 Cover LEM ⌀ large Ø 5.6 mm, gingiva height 6.7 mm
Ti gr. 5 HCS3
COVER SCREW Cover screw for ORBIT Ti gr. 5 VT
Impression Coping
Product Front Persp. Description Material Art.-No.
ORBIT REPLICA ORBIT replica analogic/digital Ti gr. 5 ANO
LEM REPLICA LEM replica analogic/digital Ti gr. 5 ANL
LEM REPLICA CEMENTED LEM replica cemented analogic/digital Ti gr. 5 ANC
Digital Impression
Analogs
Healing Cover
11
Product Front Persp. Description Material Art.-No.CONOMETRIC LEM-CAP ENGAGING Not rotational LEM-cap for conometric
retained crownsTi gr. 5 CLCAE
CONOMETRIC LEM-CAP NOT ENGAGING
Rotational LEM-cap for conometric retained bridges
Ti gr. 5 CLCRE
CONOMETRIC RESIN LEM-CAP NOT ENGAGING
Rotational resin LEM-cap for conometric retained bridges
Ti gr. 5 CLCRRE
Conical-retained Restoration
Screw-retained RestorationProduct Front Persp. Description Material Art.-No.SCREW LEM-CAP ENGAGING
Not rotational LEM-cap for screw retained crowns with VCA screw
Ti gr. 5 CLAA
SCREW LEM-CAP NOT ENGAGING
Rotational LEM-cap for bridgesretained screw with VCA screw
Ti gr. 5 CLAR
Using the appropriate cap, both conometric and screw prosthetic can be added to the LEM.For both these options there are rotational non-rotational caps.The prosthetic screws should be inserted using 25/30Ncm.The medical grade 5 titanium caps are covered in titanium nitride to increase their resistance to wear and tear.Aesthetics is improved by the gold colour which hides the metal under the soft tissue.
NoteThe prosthetic screws should be inserted using 30Ncm
Cemented RestorationProduct Front Persp. Description Material Art.-No.CEMENTED LEM-CAP ENGAGING
Not rotational LEM-cap for cemented retained crowns with VCA screw
Ti gr. 5 LC1
CEMENTED LEM-CAP NOT ENGAGING
Rotational LEM-cap for cemented retained crowns with VCA screw
Ti gr. 5 LC0
Product Front Persp. Description Material Art.-No.RETAINED SCREW Retained screw Ti gr. 5 VCA
Screw-retained
Conical and screw retained CAP
12
INTRAORAL WELDING
Product Image Description Material Art.-No.WINGS® LEM-CAP H1.0 0° rotational WINGS® LEM-cap for
conometric retained bridges.H1.0 0°
Ti gr. 5 WINGS-10-00
WINGS® LEM-CAP H1.9 0° rotational WINGS® LEM-cap for conometric retained bridges.H1.9 0°
Ti gr. 5 WINGS-19-00
WINGS® LEM-CAP H1.0 30° rotational WINGS® LEM-cap for conometric retained bridges.H1.0 30°
Ti gr. 5 WINGS-10-30
WINGS® LEM-CAP H1.9 30° rotational WINGS® LEM-cap for conometric retained bridges.H1.9 30°
Ti gr. 5 WINGS-19-30
WINGS® LEM-CAP H1.0 45° rotational WINGS® LEM-cap for conometric retained bridges.H1.0 45°
Ti gr. 5 WINGS-10-45
WINGS® LEM-CAP H1.9 45° rotational WINGS® LEM-cap for conometric retained bridges.H1.9 45°
Ti gr. 5 WINGS-19-45
ROUND BAR Ø 1.5 mm Round bar Ø 1.5 mm L 140 mmpack of 5 pieces
Ti gr. 5 ROUND-BAR-15-140
ROUND BAR Ø 1.8 mm Round bar Ø 1.8 mm L 140 mmpack of 5 pieces
Ti gr. 5 ROUND-BAR-18-140
ROUND BAR Ø 2.0 mm Round bar Ø 2.0 mm L 140 mmpack of 5 pieces
Ti gr. 4 ROUND-BAR-20-140
REINFORCEMENT BAR Reinforcement bar 4x1.5x120 mm pack of 5 pieces
Ti gr. 4 REINF-BAR-4-15-140
CASTLE BAR Reinforcement bar 3x5.2x51 mm pack of 5 pieces
Ti gr. 5 CASTLE-BAR-3-5-51
MEDICAL PLIER Medical cutting and bending plier Surgical steel
PLIER
Product Front Persp. Description Material Art.-No.CONOMETRIC WELDING LEM-CAP NOT ENGAGING
Rotational welding LEM-cap for conometric retained bridges
Ti gr. 5 CLCRW
13
Product Image Description Art.-No.INTRAORAL WELDING MACHINE BIONICA INTRAORAL WELDING MACHINE
Power supply 115-230V ACNetwork frequency 50-60 HzAverage power absorbed by the network 10 WPeak power absorbed during the welding phase: 1 KWMedical class 2 BInsulation class I - Type BF applied partProtection against anesthetics Device not suitable for use in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.IP degree of protection IPXOMethods of commitment Continuous operationOperating conditions Temp./HR/Press. 10oC - 35oC 30% - 90% 700 - 1100 hPa Storage conditions Temp./RH/Press. 5oC - 50oC 30% - 90% 700 - 1100 hPa External connections PedalDimensions 30x22x17 cm (Length x Width x Height)
BIOWELD
CYLINDRICAL ELECTRODES Cylindrical replacement electrodes CYL-EL
CONICAL ELECTRODES Conical replacement electrodes CON-EL
14
Laboratory component
Product Front Persp. Description Material Art.-No.REPOSITION LEM-CAP LEM-CAP for reposition Ti gr. 5 LCPZ
LABORATORY CONOMETRIC LEM-CAP ENGAGING
Not rotational laboratory LEM-cap for crowns conometric retained
Ti gr. 5 CLCLAE
LABORATORY CONOMETRIC LEM-CAP NOT ENGAGING
Rotational laboratory LEM-cap for bridges conometric retained
Ti gr. 5 CLCLRE
LABORATORY PROSTHETIC SCREW CAP
Laboratory M2.0 screw-retainedHEX 1.2
Ti gr. 5 VCAL
Product Image Description Material Art.-No.OVER-LEM 3.6 Abutment for overdenture restoration h 3.6 Ti gr. 5 030ORB36
OVER-LEM 5.0 Abutment for overdenture restoration h 5.0 Ti gr. 5 030ORB5
CAP ATTACHEMENT KIT Cap attachement housing and elastic reten-tive caps
Steel 192ECE
CAP ATTACHEMENT Cap attachement housing Steel 141CAE
ELASTIC RETENTIVE CAP Yellow retentive cap - Retention 0,6 kg Plastic 140CEG
ELASTIC RETENTIVE CAP Pink retentive cap - Retention 1.2 kg Plastic 140CER
ELASTIC RETENTIVE CAP White retentive cap - Retention 1.8 kg Plastic 140CET
ELASTIC RETENTIVE CAP Purple retentive cap - Retention 2.7 kg Plastic 140CEV
ELASTIC RETENTIVE CAP Black retentive LABORATORY cap Plastic 140CEN
RETENTIVE HOLDER White retentive older for driver Plastic 774HC
IMPRESSION COPING OVER-LEM transfert Steel 044CAIN
OVER-LEM REPLICA OVER-LEM analog Steel 144AE
INSERTION/EXTRACTOR TOOL Insertion and extractor tool for elasticretentive cap
Plasticsteel
485IC
Overdenture Restoration
NoteThe OVER-LEM should be locked at torque MAX 50 Ncm
15
SURGICAL AND PROSTHETIC INSTRUMENTS
All the surgical instruments were created by BIONICA with the highest quality materials for increased durability.A specific instrument has been designed to facilitate the parallelization of LEM abutment prosthetic emergence.
IMPLANT SURGICAL BOX KITAutoclavable box made entirely from materials suitable for steam sterilisation, with silicon support and printed drill sequence surgical protocol.The box is certified in accordance with ISO 9001:2008 for the design and production of injection moulded plastic containers for the industrial and medical sectors.And it complies with UNI CEI EN ISO 13485:2016 “For the design and production of plastic autoclav-able containers for use in the medical sector”.
16
Product Image Description Material Art.-No.SURGICAL BOX Surgical box without instruments Plastic and
siliconeBKO
SURGICAL BOX WITH SURGICAL INSTRUMENTS
Surgical box with instrumentsDrill, Stop drill sleeves, Bone mill, Extension, Implant driver small and long, Screw driver small and long, Torque wrench, Lem parallelize.
Plastic silicone and surgical steel
KCCO
GUIDED SURGICAL BOX Guided surgical box without instruments
Plastic and silicone
BKGO
GUIDED SURGICAL BOX WITH SURGICAL INSTRUMENTS
Guided surgical box with instru-mentsDrill, Stop drill, Pin, Tissue punch, Bone mill, Guided implant driver, Torque wrench, Lem parallelize.
Plastic silicone and surgical steel
KCCGO
Product Image Description Material Art.-No.
LANCEOLATE MILLING CUTTER Lanceolate milling cutter Ø 1.5 AISI630 FL15
STRAIGHT DRILL Ø 2.0 Straight drill Ø 2.0 AISI630 FD20
STRAIGHT DRILL Ø 2.4 Straight drill Ø 2.4 AISI630 FD24
CONICAL DRILL Ø 2.8 Conical drill Ø 2.8 apex Ø 2.1 AISI630 FC285
CONICAL DRILL Ø 3.2 Conical drill Ø 3.2 apex Ø 2.1 AISI630 FC325
CONICAL DRILL Ø 3.8 Conical drill Ø 3.8 apex Ø 2.7 AISI630 FC385
CONICAL DRILL Ø 4.5 Conical drill Ø 4.5 apex Ø 3.2 AISI630 FC455
CONICAL DRILL Ø 5.5 Conical drill Ø 5.5 apex Ø 3.7 AISI630 FC555
Product Front Persp. Description Material Art.-No.SURGICAL GUIDE PEEK SLEEVE Surgical guide sleeve in peek int. Ø 5.0 Peek BPAP
SURGICAL GUIDE SLEEVE Surgical guide sleeve in steel int. Ø 5.0 Steel BPA
SURGICAL GUIDE PIN Surgical guide pin Ø 1.5 mm L 16 mm Steel PFD
SURGICAL GUIDE PIN SLEEVE Surgical guide pin sleeve in steel int. Ø 1.5
Steel BAP
17
Product Image Description Material Art.-No.
H 4.0 DRILL STOP Stop sleeve h 4.0 mm for section drill max Ø 3.2
AISI630 BCC400
H 6.0 DRILL STOP Stop sleeve h 6.0 mm for section drill max Ø 3.2
AISI630 BCC600
H 8.0 DRILL STOP Stop sleeve h 8.0 mm for section drill max Ø 3.2
AISI630 BCC800
H 10.0 DRILL STOP Stop sleeve h 10.0 mm for section drill max Ø 3.2
AISI630 BCC100
H 11.5 DRILL STOP Stop sleeve h 11.5 mm for section drill max Ø 3.2
AISI630 BCC115
H 13.0 DRILL STOP Stop sleeve h 13.0 mm for section drill max Ø 3.2
AISI630 BCC130
Product Image Description Material Art.-No.
H 4.0 DRILL STOP LARGE Stop sleeve h 4.0 mm large for section drill max Ø 4.5
AISI630 BCC400L
H 6.0 DRILL STOP LARGE Stop sleeve h 6.0 mm large for section drill max Ø 4.5
AISI630 BCC600L
H 8.0 DRILL STOP LARGE Stop sleeve h 8.0 mm large for section drill max Ø 4.5
AISI630 BCC800L
H 10.0 DRILL STOP LARGE Stop sleeve h 10.0 mm large for section drill max Ø 4.5
AISI630 BCC100L
H 11.5 DRILL STOP LARGE Stop sleeve h 11.5 mm large for section drill max Ø 4.5
AISI630 BCC115L
H 13.0 DRILL STOP LARGE Stop sleeve h 13.0 mm large for section drill max Ø 4.5
AISI630 BCC130L
Product Image Description Material Art.-No.
BONE MILL Ø 4.0 Bone mill Ø 4.0 AISI630 PDS40
CORE DRILL Ø 6.0 Bone core mill Ø 6.0 with guide pin
AISI630 4FRO
EXTENSION INSTRUMENT Extension instrument AISI630 PRFR
IMPLANT REMOVAL TOOL Orbit Ø 4.0 implant removal tool Steel CRI
Parallelizer LEM
18
Product Image Description Material Art.-No.
PARALLELIZER LEM Parallelizer for LEM abutment.This specific instrument has been designed to facilitate the paralleli-zation of LEM abutment prosthet-ic emergence.
SurgicalSteel
PAR
FULL ARC GUIDE Full arc guide for drill angle control SurgicalSteel
GPA
DIRECTION INDICATOR PIN Direction indicator pin Ø 2.0 mm 30° angled
SurgicalSteel
IDD20
TORQUE WRENCH Torque wrench with Ø 7.0 mm head
SurgicalSteel-Peek
DNM
Product Image Description Material Art.-No.
MANUAL LEM DRIVER Manual driver for abutment LEM SurgicalSteel
ILEM
LEM DRIVER Contrangle LEM driver SurgicalSteel
4ICLEM
IMPLANT DRIVER S Implant driver contrangle small SurgicalSteel
4ICIC
IMPLANT DRIVER L Implant driver contrangle long SurgicalSteel
4ICIL
IMPLANT DRIVER GUIDED Implant driver contrangle guided SurgicalSteel
4ICIG
Product Image Description Material Art.-No.
SCREWDRIVER 1.2 SMALL Prostetic screw-driver 1.2 small SurgicalSteel
CMC
SCREWDRIVER 1.2 LONG Prostetic screw-driver 1.2 long SurgicalSteel
CML
SCREWDRIVER 1.2 MACHINE SMALL
Prostetic screw-driver 1.2 machine small
SurgicalSteel
4CCC
SCREWDRIVER 1.2 MACHINE LONG
Prostetic screw-driver 1.2 machine long
SurgicalSteel
4CCL
EXTRACTOR CAP Extractor for conometrical LEM cup
SurgicalSteel
EC3
OVER-LEM SCREWDRIVERMACHINE
Prostetic screw-driver machine for OVER-LEM
SurgicalSteel
4ICLEMB
IMPLANT CAVITY CLEANER Implant cavity cleaner SurgicalSteel
PLC
19
Product Image Description Material Art.-No.
ZYGOMATIC SURGICAL KITWITH INSTRUMENTS
Zygomatic surgical kitbox with instrument:s: Drill, driver, Depth probe measure, Depth straight probe measure, Round bone mill, Track drill, Screw driver small and long, Surgical driver.
Plastic silicone and surgical steel
KCCOZ
ORBIT ZYGO DRIVER Orbit Zygo Driver with lock AISI630 4ICIM
ROUND BUR Round bur Ø 2.8 AISI630 FRZ2867
STRAIGHT DRILL Ø 2.8 Zygomatic straight drill Ø 2.8 AISI630 FDZ2867
LONG STRAIGHT DRILL Ø 2.8 Zygomatic long straight drill Ø 2.8 AISI630 FDZL2895
STRAIGHT DRILL Ø 3.2 Zygomatic straight drill Ø 3.2 AISI630 FDZ3267
LONG STRAIGHT DRILL Ø 3.2 Zygomatic long straight drill Ø 3.2 AISI630 FDZL3295
STRAIGHT BONE DRILL Ø 3.5 Straight bone drill Ø 3.5 AISI630 FDZ3552
DEPTH PROBE Depth probe AISI630 MPAZ
STRAIGHT DEPTH PROBE Straight depth probe AISI630 MPDZ
SURGICAL DRIVER Surgical handle driver AISI630 MCI
SURGICAL KIT
Contrangle ORBIT ZYGO driverIt can also be used with the surgical handle driver MCI
ORBIT ZYGO
20
®
www.bionica.bio
MADE IN ITALY 0425
BIONICA SRLViale Bassani, 87i36016, Thiene, VIItaly0039 0445 366337
Mod
.OB
00
2 R
ev. 1
del
22/
07/
2021
®
OR
BIT